6mm Twinwall Polikarbonat Grinhaus Panel

6mm Twinwall Polikarbonat Grinhaus Panel

HSQY 6mm twinwall polycarbonate grin haus panɛl de kam togɛda wit laytwɛt olo strɔkchɔ, impak rɛsistɛns, insuleshɔn ɛn layt transmishɔn fɔ grɛnhaus ruf, wɔl, skaylayt ɛn agrikalchɔral glaz.

Twinwall polycarbonate sheet matirial , we dεn kכl bak olo polycarbonate sheet matirial כ dכbl-wכl polycarbonate panεl, na tu polycarbonate skin dεm we kכnekt bay intanεt rib dεm. Di enklos ay chanɛl dɛn de ridyus panɛl wet we dɛn de impɔtant tɛmral insuleshɔn kɔmpia wit wan singl sɔlid layt.

Dis prodak pej de fos pan di 6mm twnwall strɔkchɔ fɔ grin haus ɛn agrikalchɔral glazing. HSQY in kɔrɛnt maltiwɔl rɛnj inklud bak ɔda 2RS ɛn 3RS tiknes fɔ prɔjek dɛn we nid difrɛn lɛvɛl dɛn fɔ rigiditi ɛn insuleshɔn.

6mm Polycarbonate Grinhaus Panel Spesifikasi

Spɛsifikeshɔn Notis: Dɛn fɔ kɔnfyus di ɛksaktɔ sheet matirial lɔng, wet fɔ wan skwea mita, layt transmishɔn, U-valyu, UV-layer kɔnfigyushɔn, dimɛnshɔnal tolɛreshɔn ɛn strɔkchɔral span fɔ di 6mm panɛl we dɛn dɔn pik bifo dɛn gri fɔ di prɔjek.

Wetin Na 6mm Twinwall Polikabɔnɛt Grinhaus Panɛl?

wan 6mm twinwall polycarbonate panεl gεt tu εkstirian polycarbonate skin dεm we kכnekt bay intanal rib dεm, we de prodyuz hol chanεl dεm tru di tiknes fכ di sheet matirial .

Dɛn ay chanɛl ya de ridyus di matirial wet ɛn ɛp fɔ stɔp di ɔt transfa, we de mek twinwɔl panɛl dɛn yusful fɔ grɛnhɔus wɔl ɛn ruf usay di wan dɛn we de gro nid prɛktikal balans bitwin di de layt we dɛn de transmit, tɛmal insuleshɔn, impak rɛsistɛns ɛn panɛl wet.

Na 6mm ɔvala tik, di panɛl de gi mɔ statin rigiditi ɛn insulɛt ɛya spɛs pas tin 4mm twinwall sheet matirial we i de kɔntinyu fɔ rili layt fɔ grɛnhɔus instɔleshɔn.

Wetin mek yu fɔ yuz 6mm Twinwall Polycarbonate fɔ Grin Haus?

• Hollow insulating structure: Di air channels de ɛp fɔ ridyus di ɔt transfa tru di grin haus glazing.

• Natural layt: Multiwall polycarbonate de alaw yusful de layt fɔ go insay di grin haus we in rib strɔkchɔ kin difyuz layt we de kam.

• Impakt rɛsistɛns: Polikabɔnɛt de gi yusful rɛsistɛns to nɔmal hanlin impak ɛn wɛda-rilayt dɛbris kɔmpia wit britl glazing matirial.

• Lɔwa panɛl wet: Olo kɔnstrɔkshɔn de ridyus di wet we yu kɔmpia am wit sɔlid glazing we gɛt di sem ɔvala tik.

• UV-protɛkt sɔfa: Di prɔdak infɔmeshɔn we de naw de list kɔ-ɛkstrud UV protɛkshɔn fɔ aplikeshɔn dɛn we di san de sho.

• I izi fɔ mek: Dɛn kin kɔt ɛn drɔ panɛl dɛn bay we dɛn de yuz fayn tul dɛn we dɛn de mek ɛn instɔl grɛnhɔus.

• Bɔku kɔlɔ dɛn: Klia, opal ɛn tint kɔlɔ dɛn de sɔpɔt difrɛn agrikalchɔral ɛn akitɔkchral rikwaymɛnt dɛn.

Layt Transmishɔn & Difyushɔn fɔ Grin Haus

Layt transmishɔn na wan pan di impɔtant paramita dɛn we yu de pik grɛnhɔus glaz bikɔs di panɛl de kɔntrol aw bɔku solar redyushɔn de rich di krop kanopi.

Di kɔrɛnt HSQY maltiwɔl prodak infɔmeshɔn se di prodak famili kin gi te to lɛk 80% natura-layt difyushɔn. Dis na jenɛral maltiwɔl- sheet matirial stetmɛnt pas wan verify layt-transmishɔn valyu fɔ ɛvri 6mm kɔlɔ.

Fɔ kɔmɛshɔnal grɛnhɔus prɔjek, aks fɔ di aktual visible-layt transmishɔn ɛn difyushɔn data fɔ di 6mm klia, opal ɔ kala panɛl we yu dɔn pik. Difrɛn kɔlɔ dɛn kin prodyuz bɔku difrɛn optik pefɔmɛns.

Tεrmal Insulεshכn כf 6mm Twinwall Polikabכnayt

Di enklosed air channels in twinwall polycarbonate de gi thermal insulation we nɔ de insay wan singl sɔlid glazing layt.

HSQY in ɔrijinal maltiwɔl infɔmeshɔn de diskrayb di prɔdak famili as i de gi sɔbstanshal bɛtɛ insuleshɔn pas singl-pan glas. Di ekzak thermal pefomans fɔ wan 6mm panɛl fɔ evalyu yuz in aktual U-valyu ɔ R-valyu pas fɔ aplay wan jenɛrik maltiwɔl kɔmpiashɔn to ɛvri kɔnfigyushɔn.

Fɔ grin haus we gɛt ɔt ɔ prɔjek dɛn we de na kol klaymat, U-valyu impɔtant mɔ bikɔs i de afɛkt di ɔvnayt ɔt lɔs ɛn di ɔt dimand.

6mm Polikarbonat vs. Grinhaus Glas

6mm vs. 4mm Twinwall Polikarbonɛt fɔ Grinhaus

6mm vs. 8mm twinwal polikarbonat

Klia vs. Kɔlɔ Grinhaus Polikabɔnɛt Panɛl dɛn

Di HSQY rɛnj we de naw inklud klia, grɛn, lek blu, blu, ɛmirald, brawn, gras grɛn, opal, grey ɛn kɔstɔm kɔlɔ dɛn.

Fɔ krop-prɔdakshɔn grin haus, dɛn nɔ fɔ pik kɔlɔ jɔs bay we dɛn de si. Rikwest di aktual layt-transmishɔn data fɔ di panɛl we yu dɔn pik bikɔs tint kin chenj di kwantiti ɛn spɛktrum fɔ layt we de kam insay di grin haus.

UV Protekshɔn fɔ Grinhaus Polikabɔnɛt

Di infɔmeshɔn bɔt di prɔdak we de naw se HSQY multiwall polycarbonate de yuz co-extruded UV protection fɔ ɛp fɔ ridyus di san layt-rilayt yɔlɔ ɛn dɛgradɛshɔn.

Bifo yu instɔl am, kɔnfɔm if di panɛl we yu dɔn pik gɛt wan sayd we UV-protɛkt ɔ ɔda UV kɔnfigyushɔn. If dɛn gi protɛkshɔn na wan say, di say we dɛn protɛkt fɔ de na do fɔ mek di san de shayn.

Nɔ pul di protɛktiv film te panɛl kɔt, drɔlin ɛn pozishɔn dɔn sɔbstanshal, ɛn fala di ɔriɛnteshɔn mak dɛn we dɛn gi wit di sheet matirial .

Kɔndɛnseshɔn Kɔnsidɛreshɔn fɔ Grin Haus

Kɔndenseshɔn na tin we kɔmɔn insay grin haus bikɔs wam humid ɛya kin kɔntakt kol glazing sɔfays. Drɔplet kin ridyus di layt we dɛn kin transmit ɛn i kin fɔdɔm pan tin dɛn we dɛn plant.

Di ɔrijinal HSQY pej de diskraib di panɛl se i de ɛp wit grɛnhɔus kɔndɛnseshɔn, bɔt i nɔ de pablish wan dediket anti-drip ɔ anti-kɔndɛnseshɔn kɔtin spɛsifikɛshɔn.

If kɔmɛshɔnal grɛnhɔus prodakshɔn nid fɔ gɛt anti-kɔndɛnseshɔn sɔfays, spɛsifa da rikwaymɛnt de sɛpret ɛn kɔnfɔm if di ɛksaktɔ 6mm gred inklud wan dediket kɔndɛns-kɔntrol tritmɛnt.

Grinhaus & Akitekchral Aplikeshɔn dɛn

Grinhaus Ruf Panel dɛn

6mm twinwall polycarbonate kin yuz fɔ grinhaus ruf glazing usay in laytwɛt strɔkchɔ, transmit de layt ɛn olo insuleshɔn de gi prɛktikal ɔltɛrnativ to singl-pan glazing.

Ruf suitability dipen pan rafter spacing, purlin spacing, ruf slope, sheet matirial oriɛnteshɔn, briz prɛshɔn, sno lod ɛn fastening dizayn. Di kɔrɛnt sɔs nɔ de pablish wan yunivasal span tebul fɔ di 6mm prodak.

Grinhaus Wall Panel dɛn

Dɛn kin yuz twinwɔl panɛl dɛn bak fɔ grɛnhɔus saydwɔl ɛn ɛnd wɔl usay dɛn nid natura layt, impak rɛsistɛns ɛn tɛmal insuleshɔn.

Vɛtikal panɛl dɛn fɔ instɔl wit di intanɛnt chanɛl dɛn we ɔriɛnt vertikal usay i pɔsibul so dat ɛni intanɛnt kɔndɛnseshɔn kin dreyn to di edj we de dɔŋ.

Skylights, Canopies & Kɔba Wokway dɛn

Di sem laytwɛt olo strɔkchɔ de mek multiwall polycarbonate yusful fɔ sɔm sɛlɛkɛt skaylayt, kanopi, kɔba wokay ɛn translucent ruf sɛkshɔn.

Fɔ akitekchral aplikeshɔn, dɛn fɔ pik panɛl tik ɛn freym frɔm di prɔjek lod dɛn pas fɔ tek am se 6mm grɛnhɔus panɛl fit fɔ ɛvri ruf span.

Swimin Pul Enklɔzhɔ dɛn

Di ɔrijinal prodak infɔmeshɔn de list swimin-pul ɛnklɔzhɔ as ɔda maltiwɔl-pɔlikabɔnɛt aplikeshɔn. Projɛkt dɛn we de na say dɛn we humid ɔ we dɛn dɔn trit wit kemikal fɔ tink bɔt dizayn fɔ freym, ventileshɔn, silant kɔmpatibiliti ɛn fɔ ɛkspos to pul-tritmɛnt kemikal dɛn.

Nɔys Barɛri & Indastrial Panɛl dɛn

Dɛn rayt di nɔys barɛri dɛn bitwin di ɔrijinal aplikeshɔn dairekshɔn dɛn. Bɔt dɛn nɔ fɔ tek wan patikyula sawnd-ridɔkshɔn valyu if dɛn nɔ gɛt akostik tɛst data fɔ di ɛksaktɔ panɛl strɔkchɔ ɛn di sistɛm we dɛn dɔn instɔl.

Storm & Protektiv Aplikeshɔn dɛn

Polikabɔnɛt de gi yusful impak rɛsistɛns, ɛn di ɔrijinal sɔs tɔk bɔt storm panɛl ɛn flay-debris protɛkshɔn.

Wan 6mm olo sheet matirial nɔ fɔ ɔtomɛtik diskrayb as hariken-rɛyt ɔ kɔd-aprɔv. Hariken, saiklɔn ɔ windborne-debris protɛkshɔn nid di rilevɛns tɛst panɛl sistɛm, freym, fastɛns ɛn instɔleshɔn aprɔval.

Aw fɔ Instɔl 6mm Twinwall Polikabɔnɛt Panɛl dɛn

Kip di Flut dɛn na di Drenage Dairekshɔn

Fɔ di grinhaus ruf dɛn we slo, instɔl di intanɛnt chanɛl dɛn na di say we di slɔp de. Fɔ di wɔl, ɔriɛnt di chanɛl dɛn vertikal usay i pɔsibul. Dis kin ɛp fɔ mek di wata kɔmɔt na di olo strɔkchɔ.

Instɔl di UV-Protɛkt Sayd Toward di San

Usay dɛn gi UV protɛkshɔn na wan say, da say de fɔ de na do. Fɔ fala di printin ɔ mak we de na di protɛktiv film we dɛn gi wit di panɛl.

Alaw fɔ Tɛmral Ɛkspɛnshɔn

Polikabɔnɛt de bɔku ɛn kɔntrakt as di tɛmpracha de chenj. Glazing profayl, fasten hol ɛn framing fɔ alaw fɔ muv fayn instead fɔ rigidly klamp di panɛl.

Sial di Olo Chanɛl dɛn Kɔrɛkt wan

Afta yu dɔn kɔt, pul di chips ɛn dɔst na di chanɛl dɛn. Yuz fayn fayn silin ɔ ventileshɔn tep ɛn edj profayl fɔ ɛp fɔ ridyus dɔst, insɛkt ɛn pasmak mɔstɔ we de kam insay di sheet matirial .

Yuz Kɔmpatibl Fasteners & Sialant dɛn

Fasteners, washers, profiles ɛn sealants fɔ kɔmpitabl wit polycarbonate ɛn dɛn fɔ mek am fɔ akɔmod thermal muvmɛnt we nɔ go mek pasmak lokaliz prɛshɔn.

Kɔnfɛm Sɔpɔt Spays

Nɔ yuz yunivasal sɔpɔt spɛshal we yu nɔ chɛk di prɔjek. Span dipen pan panɛl strɔkchɔ, briz prɛshɔn, sno lod, ruf pitch, freym ɛn lokal rikwaymɛnt.

Kot & Drilin 6mm Polycarbonate shit

Di infɔmeshɔn bɔt di prɔdak we de naw se dɛn kin kɔt ɛn drɔ di maltiwɔl polikabɔnɛt na di sayt. Dɛn fɔ yuz fayn plastic-wok tul dɛn ɛn kɔrɛkt panɛl sɔpɔt fɔ ridyus di rɔf ed dɛn, krak krak ɛn kɔntaminɛshɔn na di intanɛnt chanɛl dɛn.

Us Infɔmeshɔn Yu Fɔ Gi Fɔ Kot?

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt 6mm Grinhaus Polikabɔnɛt

Wetin na 6mm twinwall polycarbonate panɛl?

na 6mm tik olo polikabonayt panεl wit tu כta skin dεm we intanεt rib dεm kכnekt, we de mek insulεt εya chεnal dεm bitwin di sεf dεm.

6mm twinwall polycarbonate gud fo grin haus?

6mm twinwall polycarbonate kin fayn fɔ grin haus wɔl ɛn ruf usay in layt transmishɔn, insuleshɔn, lɔw wet ɛn impak rɛsistɛns mit di prɔjek rikwaymɛnt dɛn. Dɛn fɔ tink bak bɔt aw fɔ mek di freym spɛshal ɛn di lokal lod dɛn.

6mm beta pas 4mm polycarbonate fo grin haus?

6mm jεnarali de gi big כvala tik εn rigiditi pas 4mm εn i kin gi bεtε insulεshכn. Di bɛst tin fɔ pik de dipen pan grɛnhɔus saiz, klaymat, sɔpɔt spɛshal ɛn badjɛt.

A fɔ pik 6mm ɔ 8mm twinwall polycarbonate?

6mm fayn fɔ bɔku grɛnhɔus aplikeshɔn wit di rayt freym, we dɛn kin tink bɔt 8mm we dɛn nid fɔ gɛt ɔda panɛl rigiditi ɔ insuleshɔn. Kɔnfɛm aktual pefɔmɛns data fɔ ɔl tu di strɔkchɔ dɛn bifo di fayn sɛlɛkshɔn.

Aw bɔku layt 6mm twinwall polycarbonate de transmit?

Di HSQY sɔs we de naw de gi wan jenɛral maltiwɔl stetmɛnt we de rich lɛk 80% natura-layt difyushɔn. Dɛn fɔ aks fɔ ɛksaktɔ 6mm layt-transmishɔn data fɔ di kɔlɔ ɛn strɔkchɔ we yu dɔn pik.

Wetin na di U-valyu fɔ HSQY 6mm twinwall sheet matirial ?

Di kɔrɛnt prodak sɔs nɔ de pablish wan patikyula U-valyu fɔ dis 6mm panɛl. Rikwest di thermal data fɔ di ɛksaktɔl strɔkchɔ we insuleshɔn pefɔmɛns na pat pan di prɔjek spɛsifikɛshɔn.

Di panɛl gɛt UV protɛkshɔn?

Di infɔmeshɔn bɔt di prɔdak we de naw se dɛn de yuz kɔ-ɛkstrud UV protɛkshɔn. Kɔnfɛm di UV-protɛkt sayd ɔ di ɛksaktɔ UV kɔnfigyushɔn bifo instɔleshɔn.

Us say na di polycarbonate panɛl de fes na do?

If di panɛl gɛt UV protɛkshɔn na wan say, di say we dɛn protɛkt fɔ fes di san. Fɔ fala di mak we de na di protɛktiv fim we dɛn gi ɛn di prɔdak dɔkyumentri.

Di olo chanɛl dɛn de rɔn vertikal ɔ ɔrizɔntal?

Fɔ grin haus wɔl, chanɛl dɛn fɔ jɔs rɔn vertikal. Na ruf dɛn we slo, dɛn fɔ nɔmal fɔ fala di ruf slɔp so dat di wata we de na di ruf go drayn go na di ed we de dɔŋ.

HSQY 6mm grɛnhɔus sheet matirial gɛt anti-kɔndɛnseshɔn kɔtin?

Di kɔrɛnt sɔs menshɔn kɔndenseshɔn pefɔmɛns bɔt i nɔ de pablish wan dediket anti-drip kɔtin spɛsifikɛshɔn. Spɛsifik anti-kɔndɛnseshɔn tritmɛnt sɛpret if dɛn nid am.

Us kɔlɔ dɛn de?

Di infɔmeshɔn bɔt di prɔdak we de naw de sho klia, grɛn, lek blu, blu, ɛmirald, brawn, gras grɛn, opal, grey ɛn kɔstɔm kɔlɔ dɛn.

Us waid de?

Di ditayl prodak spesifikeshɔn naw de list 2100mm wit. Eksakt dimɛnshɔn ɛn tolɛreshɔn fɔ kɔnfɔm fɔ di ɔda.

Yu kin kɔt 6mm polycarbonate na di sayt?

Yɛs. Di infɔmeshɔn bɔt di prɔdak we de naw se dɛn kin kɔt ɛn drɔ di maltiwɔl polikabɔnɛt na di sayt we dɛn de yuz fayn tul dɛn ɛn di we aw dɛn de instɔl am.

Aw dɛn fɔ sial di ɛnd dɛn we gɛt ol?

Yuz di rayt silin ɔ ventileshɔn tep ɛn edj profayl dɛn akɔdin to di panɛl ɔriɛnteshɔn. Dis de ɛp fɔ stɔp dɔst, insɛkt ɛn bɔku bɔku wata we de kam insay di chanɛl dɛn.

Yu tink se polycarbonate panɛl dɛn nid ɛkspɛnshɔn kliarens?

Yɛs. Polikabɔnɛt de chenj dimɛnshɔn as tɛmpracha de chenj, so di prɔfayl ɛn fastɛns ol dɛn fɔ alaw di rayt tɛmal muvmɛnt.

6mm panɛl kin ebul fɔ handle sno ɛn ays blɔk?

Polikabɔnɛt de gi yusful impak rɛsistɛns, bɔt di we aw di prɔjek fit, dipen pan di sno lod, di ays blɔk, panɛl span, di freym spɛshal, di ruf slɔp ɛn di instɔleshɔn sistɛm. Nɔ pik di panɛl frɔm di tik nɔmɔ.

Yu tink se 6mm polikabɔnɛt nɔ ebul fɔ bia wit ɔrikayn?

Wan jenɛral 6mm olo panɛl nɔ fɔ ɔtomɛtik wan we dɛn tek am se i gɛt ɔrikayn rayt. Windborne-debris ɛn hariken aplikeshɔn dɛn nid fɔ gɛt wan tɛst kɔmplit sistɛm we inklud sheet matirial , framing ɛn fastɛns.

Us infɔmeshɔn a fɔ gi fɔ kot grɛnhɔus?

Duya gi di grɛnhɔus dimɛnshɔn, panɛl tik, sheet matirial saiz, kɔlɔ, layt ɛn tɛmal pefɔmɛns we dɛn nid, freym spɛshal, klaymat kɔndishɔn, anti-kɔndɛnseshɔn rikwaymɛnt, aksesɔri, kwantiti ɛn ples fɔ go.

Packaging & Dilivri fɔ di tin dɛn we dɛn de du

• Sampul Pak: Shit dɛn we de insay PE bag dɛn we de protɛkt, we dɛn pak insay katon.

• Sheet Packaging: 30kg fɔ wan bag wit PE film, ɔ as dɛn nid am.

• Palet Palet: 500-2000kg fɔ wan plai wud palet.

• Kontena Lod: 20 tan, optimiz fɔ 20ft/40ft kɔntena.

• Dilivri Tɛm dɛn: FOB, CIF, EXW.

• Lid Taym: 7-15 dez afta dipɔsit, dipen pan ɔda volyum.

Sɛtifiket dɛn we dɛn kin gi

Di kɔrɛnt prodak infɔmeshɔn rɛfrɛns SGS ɛn ISO 9001:2008. Projek-spɛsifi k sɛtifiket, fizik-prɔpati ripɔt ɛn kɔmplians dɔkyumɛnt fɔ kɔnfyus fɔ di ɛksaktɔl polikabɔnɛt sheet matirial , tik, kɔlɔ ɛn dɛstineshɔn-maket rikwaymɛnt.

Bɔt HSQY Plastik Grup

HSQY Plastic Group se dɛn dɔn wok fɔ pas 20 ia ɛn dɛn de ɔpreshɔn 8 faktri dɛn, we de saplae plastic matirial fɔ pak, kɔnstrɔkshɔn, mɛdikal ɛn industrial aplikeshɔn dɛn.

Fɔ grɛnhɔus projɛkt, HSQY kin tɔk bɔt maltiwɔl strɔkchɔ, panɛl tik, dimɛnshɔn, kɔlɔ, UV protɛkshɔn, optik rikwaymɛnt, klaymat kɔndishɔn, pak ɛn intanashɔnal delivri rikwaymɛnt.