6mm Twinwall Polycarbonate Afiri a Wɔde Yɛ Nneɛma a Ɛyɛ Fɛ

6mm Twinwall Polycarbonate Afiri a Wɔde Yɛ Nneɛma a Ɛyɛ Fɛ

HSQY 6mm twinwall polycarbonate greenhouse panel ka hollow structure a emu yɛ hare, impact resistance, insulation ne hann a wɔde fa greenhouse dan atifi, afasu, skylights ne kuayɛ glazing bom.

Twinwall polycarbonate krataa so nsɛm , a wɔsan frɛ no hollow polycarbonate krataa so nsɛm anaasɛ polycarbonate panel a ɛwɔ ɔfasu abien no yɛ polycarbonate nwoma abien a ɛnam mpampam a ɛwɔ mu so na ɛka bom. Mframa akwan a wɔato mu no tew panel mu duru so bere a ɛma ɔhyew a wɔde siw ano no tu mpɔn bere a wɔde toto ade biako a ɛyɛ den ho no.

Saa ade krataafa yi twe adwene si 6mm twnwall nhyehyɛe a wɔde yɛ greenhouse ne kuayɛ glazing so. HSQY mprempren multiwall range nso ka 2RS ne 3RS thicknesses afoforo ma nnwuma a ɛhwehwɛ sɛ wɔyɛ rigidity ne insulation ahorow.

6mm Polycarbonate Greenhouse Panel Nsɛm a Wɔka Kyerɛ

Nkyerɛkyerɛmu Hyɛ no nsow: Ɛsɛ sɛ wɔsi krataa so nsɛm tenten pɛpɛɛpɛ, emu duru wɔ mita ahinanan biara mu, hann a ɛkɔ, U-boɔ, UV-layer nhyehyeɛ, dimensional tolerance ne structural span so dua ma 6mm panel a wɔapaw no ansa na wɔapene adwuma no so.

Dɛn ne 6mm Twinwall Polycarbonate Greenhouse Panel a Ɛyɛ Fɛ?

6mm twinwall polycarbonate panel wɔ abɔnten polycarbonate nwoma abien a wɔde emu mparow abɔ mu, na ɛma akwan a ɛyɛ tokuru fa krataa so nsɛm no kɛse mu.

Saa mframa akwan yi tew nneɛma mu duru so na ɛboa ma ɔhyew a ɛkɔ baabiara no ano hye, na ɛma twinwall panels yɛ nea mfaso wɔ so ma greenhouse afasu ne ɔdan atifi a wɔn a wodua no hia sɛ wɔkari pɛ wɔ awia hann a wɔde fa mu, ɔhyew a wɔde siw ano, impact resistance ne panel mu duru ntam.

Wɔ 6mm ne nyinaa mu duru mu no, panel no ma mfiase rigidity ne insulating mframa space sen thinner 4mm twinwall krataa so nsɛm bere a ɛda so ara yɛ hare kakra ma greenhouse installation.

Dɛn Nti na Wɔde 6mm Twinwall Polycarbonate Di Dwuma Ma Greenhouses?

• Hollow insulating structure: Mframa akwan no boa ma ɔhyew a ɛfa greenhouse glazing no mu no so tew.

• Abɔde mu hann: Multiwall polycarbonate ma awia hann a mfaso wɔ so kɔ greenhouse no mu bere a ne ribbed structure no tumi trɛw hann a ɛba no mu.

• Nsunsuansoɔ a ɛko tia: Polycarbonate ma mfasoɔ a ɛko tia nsunsuansoɔ a wɔde di dwuma sɛdeɛ ɛteɛ ne nneɛma a asɛe a ɛfa wim tebea ho sɛ wɔde toto nneɛma a wɔde yɛ glazing a ɛyɛ mmerɛw ho a.

• Panel mu duru a ɛba fam: Sɛ wɔde tokuru adansi toto ahwehwɛ a ɛyɛ den a ne nyinaa mu duru yɛ pɛ ho a, ɛtew emu duru so.

• UV-protected surface: Mprempren nneɛma ho nsɛm no kyerɛw co-extruded UV ahobammɔ a wɔde di dwuma a owia hann da adi.

• Ɛnyɛ den sɛ wɔbɛyɛ: Wobetumi de nnwinnade a ɛfata atwitwa na wɔatutu panel ahorow bere a wɔreyɛ greenhouse na wɔde ahyɛ mu no.

• Kɔla ahorow pii: Kɔla ahorow a emu da hɔ, opal ne tinted boa kuayɛ ne adansi ho ahwehwɛde ahorow.

Hann a Wɔde Kɔma & Ntrɛwmu ma Greenhouses

Hann a ɛkɔ so yɛ nneɛma a ɛho hia sen biara no mu biako bere a wɔrepaw greenhouse glazing efisɛ panel no na ɛhwɛ owia hann dodow a ɛkɔ nnɔbae no atifi no so.

Mprempren HSQY multiwall afiri ho nsɛm ka sɛ afiri abusua no betumi ama bɛyɛ 80% abɔde-hann a ɛtrɛw. Eyi yɛ multiwall- krataa so nsɛm asɛm a wɔka no nyinaa sen sɛ ɛbɛyɛ hann-nkɔbea bo a wɔagye atom ama 6mm kɔla biara.

Wɔ aguadi mu greenhouse nnwuma ho no, bisa hann a wotumi hu ankasa a wɔde fa ne diffusion data ma 6mm clear, opal anaa colored panel a wɔapaw no. Kɔla ahorow betumi ama aniwa so adwumayɛ a ɛsono emu biara koraa.

Ɔhyew a wɔde siw ano a ɛyɛ 6mm Twinwall Polycarbonate

Mframa akwan a wɔato mu wɔ twinwall polycarbonate mu no ma ɔhyew a enni ahwehwɛ a ɛyɛ den biako mu.

HSQY mfitiase multiwall nsɛm no ka nneɛma abusua no ho asɛm sɛ ɛma insulation a eye kɛse sen ahwehwɛ a ɛwɔ pane biako. Ɛsɛ sɛ wɔde ne U-boɔ anaa R-boɔ ankasa na ɛsɔ 6mm panel no thermal performance pɛpɛɛpɛ hwɛ sene sɛ wɔde generic multiwall ntotoho bedi dwuma wɔ nhyehyeɛ biara mu.

Wɔ greenhouses a ɛyɛ hyew anaa nnwuma a wɔyɛ wɔ mmeae a awɔw wom ho no, U-botae ho hia titiriw efisɛ ɛka ɔhyew a wɔhwere anadwo ne ɔhyew a wɔhwehwɛ.

6mm Polycarbonate vs. Ahwehwɛ a wɔde yɛ nneɛma a ɛyɛ hyew

6mm vs. 4mm Twinwall Polycarbonate a wɔde yɛ Greenhouses

6mm ne 8mm Twinwall Polycarbonate a wɔde yɛ adwuma

Ɛda adi pefee vs. Kɔla Greenhouse Polycarbonate Panels

Mprempren HSQY ahorow no bi ne kɔla ahorow a emu da hɔ, ahabammono, ɔtare bruu, bruu, emerald, bruu, sare ahabammono, opal, fitaa ne amanne kwan so kɔla.

Wɔ mmeae a wɔyɛ nnɔbae a wɔde yɛ nnɔbae a wɔde yɛ nnɔbae ho no, ɛnsɛ sɛ wɔde aniwa a wɔpɛ nkutoo na ɛpaw kɔla. Bisa hann a ɛkɔ baabiara ho nsɛm ankasa ma panel a woapaw no efisɛ tint betumi asesa hann dodow ne ne spectrum a ɛhyɛn greenhouse no mu.

UV Ahobammɔ a Wɔde Ma Greenhouse Polycarbonate

Mprempren nneɛma ho nsɛm ka sɛ HSQY multiwall polycarbonate de co-extruded UV ahobammɔ di dwuma de boa ma owia hann a ɛbata kɔkɔɔ ne ɔsɛe so no so tew.

Ansa na wobɛhyehyɛ no, si so dua sɛ ebia panel a woapaw no wɔ ɔfã biako a UV abɔ ho ban anaasɛ UV nhyehyɛe foforo. Sɛ wɔde ahobammɔ ma ɔfã biako a, ɛsɛ sɛ ɔfã a wɔabɔ ho ban no hwɛ abɔnten kyerɛ owia hann.

Mfi ahobammɔ film no kosi sɛ panel twa, drilling ne positioning bɛwie kɛse, na di orientation markings a wɔde ama krataa so nsɛm no akyi.

Condensation ho nsusuwii a ɛfa Greenhouses ho

Nsu a ɛyɛ nwini abu so wɔ afie a ɛma wim yɛ hyew mu efisɛ mframa a ɛyɛ hyew a ɛyɛ nwini no ne ahwehwɛ a ɛyɛ nwini di nkitaho. Nsu a ɛtɔ gu fam betumi atew hann a wɔde fa nnipa mu no so na ebetumi atɔ nnɔbae so.

HSQY kratafa a edi kan no ka panel no ho asɛm sɛ ɛboa ma greenhouse condensation, nanso ɛntintim anti-drip anaa anti-condensation coating specification a wɔatu ho ama.

Sɛ aguadi mu greenhouse production hwehwɛ sɛ wɔde anti-condensation surface di dwuma a, kyerɛ saa ahwehwɛde no wɔ ɔkwan soronko so na si so dua sɛ ebia 6mm grade pɔtee no ka condensation-control treatment a wɔatu ho ama ho anaa.

Greenhouse & Architectural Nnwuma a Wɔde Di Dwuma

Greenhouse Ɔdan atifi Panels a Wɔde Yɛ Adwuma

6mm twinwall polycarbonate betumi adi dwuma ama greenhouse roof glazing baabi a ne nhyehyɛe a emu yɛ hare, awia hann a ɛkɔ ne hollow insulation ma ɔkwan foforo a mfaso wɔ so sen single-pane glazing.

Ɔdan atifi a ɛfata no gyina rafter ntam kwan, purlin ntam kwan, ɔdan atifi a ɛkɔ fam, krataa so nsɛm kwankyerɛ, mframa nhyɛsoɔ, sukyerɛmma adesoa ne fastening design so. Mprempren fibea no ntintim amansan span pon mma 6mm ade no.

Greenhouse Ɔfasu ho Nneɛma a Wɔde Yɛ Nneɛma

Wobetumi nso de Twinwall panels adi dwuma ama greenhouse sidewalls ne end walls a abɔdeɛ mu hann, impact resistance ne thermal insulation ho hia.

Ɛsɛ sɛ wɔde vertical panels si hɔ a emu channels no kyerɛ vertically wɔ baabi a ɛbɛyɛ yiye sɛnea ɛbɛyɛ a emu nsuo biara betumi atwe akɔ fam no ano.

Skylights, Canopies & Akwan a Wɔde Nantew a Wɔakata So

Saa tokuru a emu yɛ hare koro no ara ma multiwall polycarbonate yɛ nea mfaso wɔ so ma wim ahwehwɛ a wɔapaw, canopies, akwan a wɔakata so a wɔfa so nantew ne ɔdan atifi afã horow a ɛyɛ hann.

Wɔ adansi dwumadie mu no, ɛsɛ sɛ wɔpaw panel no mu duru ne framing firi project loads mu sene sɛ wɔbɛfa no sɛ 6mm greenhouse panel fata ma ɔdan atifi span biara.

Asuguarebea a Wɔabɔ ho ban

Mfitiaseɛ nneɛma ho nsɛm no kyerɛw asuguarebea a wɔabɔ ho ban sɛ multiwall-polycarbonate application foforo. Ɛsɛ sɛ nnwuma a ɛwɔ mmeae a ɛhɔ yɛ nwini anaa nnuru a wɔde yɛ adwuma no susuw framing nhyehyɛe, mframa a wɔde bɛma, sealant a ɛne ne ho hyia ne nnuru a wɔde yɛ pool-treatment a wɔde bɛhyɛ mu no ho.

Dede Akwanside & Industrial Panels

Wɔakyerɛw dede akwanside ahorow ka akwankyerɛ a wɔde dii dwuma mfiase no ho. Nanso, ɛnsɛ sɛ wɔfa no sɛ nnyigyei a wɔtew so bo pɔtee bi nni hɔ a acoustic test data nni panel nhyehyɛe pɔtee ne nhyehyɛe a wɔde ahyɛ mu no ho.

Ahum & Ahobammɔ Nnwuma

Polycarbonate ma mfaso wɔ so sɛ ɛko tia nsunsuanso, na mfitiase fibea no ka ahum panels ne flying-debris ahobammɔ ho asɛm.

Ɛnsɛ sɛ wɔka 6mm tokuru krataa so nsɛm ho asɛm ara kwa sɛ ahum-rated anaasɛ code-approved. Ahum, ahum anaa mframa-afiri-asɛe ho banbɔ hwehwɛ sɛ wɔde panel nhyehyɛe a wɔasɔ ahwɛ a ɛfata, framing, fasteners ne installation approval.

Sɛnea Wɔde 6mm Twinwall Polycarbonate Panels Si hɔ

Ma Flutes no Nkɔ hɔ wɔ Drainage Direction no mu

Sɛ wopɛ greenhouse dan atifi a ɛkɔ fam a, fa nsu a ɛwɔ mu no si baabi a ɛkɔ fam no. Wɔ afasu ho no, kyerɛ nsu kwan no kwan tẽẽ wɔ baabi a mfaso wɔ so. Eyi boa ma nsu fi ɔdan a ɛwɔ tokuru no mu.

Fa UV-Protected Side a Ɛkɔ Owia no si hɔ

Baabi a wɔde UV ahobammɔ ama ɔfã biako no, ɛsɛ sɛ saa ɔfã no hwɛ akyi. Di tintim anaa agyiraehyɛde a ɛwɔ sini a ɛbɔ ho ban a ɛka panel no ho no akyi.

Ma kwan ma Ɔhyew Ntrɛwmu

Polycarbonate trɛw na ɛtwetwe bere a ɔhyew sesa no. Ɛsɛ sɛ glazing profiles, fastening holes ne framing ma kwan ma wɔfa so tu sen sɛ wɔbɛkyekyere panel no denneennen.

Seal Hollow Channels no yiye

Sɛ wotwitwa wie a, yi nsensanee ne mfutuma fi nsuten no mu. Fa nsɔano anaa mframa teapɔn a ɛfata ne anoano nsɛm di dwuma de boa ma mfutuma, nkoekoemmoa ne nsu a ɛboro so a ɛhyɛn krataa so nsɛm no so tew.

Fa Fasteners & Sealants a ɛne ne ho hyia di dwuma

Ɛsɛ sɛ fasteners, washers, profiles ne sealants yɛ nea ɛne polycarbonate hyia na wɔayɛ no sɛnea ɛbɛyɛ a ɛbɛma ɔhyew a ɛkɔ baabiara a ɛremma nhyɛso a ɛboro so mma wɔ mpɔtam hɔ.

Si Mmoa Spacing no so dua

Mfa amansan mmoa ntam kwan nni dwuma a wonhwɛ adwuma no mu. Span gyina panel nhyehyɛe, mframa nhyɛso, sukyerɛmma adesoa, ɔdan atifi sorokɔ, framing ne mpɔtam hɔ ahwehwɛde ahorow so.

Ntwitwa & Ntuo 6mm Polycarbonate krataa

Mprempren nneɛma ho nsɛm ka sɛ wobetumi atwitwa multiwall polycarbonate na wɔatu wɔ beae hɔ. Ɛsɛ sɛ wɔde nnwinnade a ɛfata a wɔde yɛ plastic ne panel support a ɛteɛ di dwuma de tew anoano a ɛyɛ den, mpaapaemu ne efĩ a ɛwɔ nsu a ɛwɔ mu no so.

Nsɛm Bɛn na Ɛsɛ sɛ Wode Ma Wɔ Nsɛm a Wɔafa Ka Ho?

Nsɛm a Wɔtaa Bisa Fa 6mm Greenhouse Polycarbonate Ho

Dɛn ne 6mm twinwall polycarbonate panel?

Ɛyɛ polycarbonate panel a ɛyɛ tokuru a ne kɛse yɛ mm 6 a ɛwɔ akyi were abien a wɔde emu mpampam abɔ mu, na ɛma mframa kwan a ɛmma mframa nkɔ mu wɔ n’afã horow no ntam.

So 6mm twinwall polycarbonate ye ma greenhouses?

6mm twinwall polycarbonate betumi afata ama greenhouse afasu ne ɔdan atifi baabi a ne hann a ɛkɔ, insulation, emu duru a ɛba fam ne impact resistance di adwuma no ahwehwɛde ahorow ho dwuma. Ɛsɛ sɛ wosusuw frame ntam kwan ne mpɔtam hɔ adesoa nso ho.

So 6mm ye sen 4mm polycarbonate ma greenhouse?

6mm taa ma ne nyinaa mu duru ne rigidity kɛse sen 4mm na ebetumi ama insulation a eye. Nea eye sen biara a wobɛpaw no gyina greenhouse kɛse, wim tebea, mmoa ntam kwan ne sikasɛm nhyehyɛe so.

So ɛsɛ sɛ mepaw 6mm anaa 8mm twinwall polycarbonate?

6mm fata ma greenhouse dwumadie pii a ɛwɔ frame a ɛfata, berɛ a wɔbɛtumi asusu 8mm ho berɛ a ɛho hia sɛ panel rigidity anaa insulation foforɔ. Si adwumayɛ ho nsɛm ankasa so dua ma nhyehyɛe abien no nyinaa ansa na woapaw nea etwa to.

Hann dodow ahe na 6mm twinwall polycarbonate de ma?

Mprempren HSQY fibea no de multiwall asɛm a ɛkɔ soro bɛyɛ 80% abɔde-hann trɛw ma. Ɛsɛ sɛ wɔbisa 6mm hann-nkɔ so data pɛpɛɛpɛ ma kɔla ne nhyehyɛe a wɔapaw no.

Dɛn ne U-botae a ɛwɔ HSQY 6mm twinwall krataa so nsɛm ?

Mprempren ade fibea no ntintim U-bo pɔtee biara mma saa 6mm panel yi. Bisa ɔhyew ho nsɛm a ɛfa nhyehyɛe pɔtee no ho bere a insulation adwumayɛ yɛ adwuma no ho nkyerɛkyerɛmu no fã.

So panel no wɔ UV ahobammɔ?

Mprempren nneɛma ho nsɛm ka sɛ wɔde UV ahobammɔ a wɔde co-extruded di dwuma. Si ɔfã a UV abɔ ho ban anaa UV nhyehyɛe pɔtee no so dua ansa na wode ahyɛ mu.

Polycarbonate panel no fã bɛn na ɛhwɛ abɔnten?

Sɛ panel no wɔ UV ahobammɔ wɔ ɔfã biako a, ɛsɛ sɛ ɔfã a wɔabɔ ho ban no hwɛ owia no. Di agyiraehyɛde a ɛwɔ sini a wɔde bɔ ho ban ne nneɛma ho nkrataa a wɔde ama no so no akyi.

So nsu kwan a ɛwɔ tokuru no tu mmirika gyina hɔ anaasɛ ɛkɔ soro?

Wɔ afasu a ɛma wim yɛ hyew ho no, mpɛn pii no ɛsɛ sɛ nsu kwan no tu mmirika gyina hɔ. Wɔ adan atifi a ɛkɔ fam so no, ɛsɛ sɛ wɔtaa di ɔdan atifi a ɛkɔ fam no akyi sɛnea ɛbɛyɛ a nsu betumi akɔ fam akɔ fam.

So HSQY 6mm greenhouse krataa so nsɛm wɔ aduru a ɛko tia nsuo a ɛyɛ nwini?

Mprempren fibea no ka condensation adwumayɛ ho asɛm nanso entintim anti-drip coating specification a wɔatu ho ama. Kyerɛw aduru a wɔde ko tia nsu a ɛyɛ nwini wɔ ɔkwan soronko so sɛ ɛho hia a.

Kɔla ahorow bɛn na ɛwɔ hɔ?

Mprempren nneɛma ho nsɛm no kyerɛw kɔla ahorow a emu da hɔ, ahabammono, ɔtare bruu, bruu, emerald, bruu, sare ahabammono, opal, fitaa ne amanne kwan so kɔla ahorow.

Trɛw bɛn na ɛwɔ hɔ?

Mprempren asɛm no ho nkyerɛkyerɛmu a ɛkɔ akyiri no kyerɛ 2100mm trɛw. Ɛsɛ sɛ wosi nsusuwii ne abodwokyɛre pɔtee so dua ma nhyehyɛe no.

So wobetumi atwitwa 6mm polycarbonate wɔ beae hɔ?

Aane. Mprempren nneɛma ho nsɛm ka sɛ wobetumi atwitwa multiwall polycarbonate na wɔatu wɔ beae hɔ denam nnwinnade a ɛfata ne akwan a wɔfa so de si hɔ so.

Ɔkwan bɛn so na ɛsɛ sɛ wɔsɔ ano a ɛyɛ tokuru no ano?

Fa sealing anaa ventilation tapes a ɛfata ne edge profiles di dwuma sɛnea panel orientation te. Eyi boa ma mfutuma, nkoekoemmoa ne nsu a ɛboro so a ɛhyɛn nsuten no mu no ano hye.

So polycarbonate panels hia ntrɛwmu kwan?

Aane. Polycarbonate sesa ne kɛse bere a ɔhyew sesa no, enti ɛsɛ sɛ profile ne fastener holes ma kwan ma ɔhyew a ɛfata tu.

So 6mm panels betumi adi sukyerɛmma ne asukɔtweaa ho dwuma?

Polycarbonate ma mfasoɔ a ɛko tia nsunsuansoɔ, nanso adwuma no a ɛfata no gyina sukyerɛmma adesoa, asukɔtweaa tebea, panel span, frame ntam kwan, ɔdan atifi a ɛkɔ fam ne nhyehyɛeɛ a wɔde besisi hɔ so. Mpaw panel no mfi ne kɛse nkutoo mu.

So 6mm polycarbonate tumi gyina ahum ano?

Ɛnsɛ sɛ wobu general 6mm hollow panel sɛ ahum rated no ara kwa. Mframa-asɛe ne ahum dwumadie hwehwɛ sɛ wɔyɛ nhyehyɛeɛ a ɛdi mũ a wɔasɔ ahwɛ krataa so nsɛm , framing ne fasteners ka ho.

Nsɛm bɛn na ɛsɛ sɛ mede ma wɔ greenhouse quotation ho?

Yɛsrɛ sɛ fa greenhouse nsusuwii, panel no kɛse, krataa so nsɛm kɛse, kɔla, hann ne ɔhyew adwumayɛ a wɔhwehwɛ, frame ntam kwan, wim tebea, anti-condensation ahwehwɛde, nneɛma a wɔde boa, dodow ne baabi a worekɔ.

Packaging & Nneɛma a Wɔde Kɔma

• Nhwɛsode a Wɔde Gu Nneɛma Mu: Nkratafa a ɛwɔ PE nkotoku a ɛbɔ ho ban mu, a wɔde ahyɛ nnaka mu.

• Sheet Packaging: 30kg bag biara a PE film wom, anaasɛ sɛnea ɛho hia.

• Pallet Packaging: 500-2000kg biara plywood pallet.

• Container Loading: tɔn 20, wɔayɛ no yiye ama 20ft/40ft nsukorade.

• Nsɛm a Wɔde Kɔma: FOB, CIF, EXW.

• Lead Time: 7-15 nna akyi deposit, gyina order dodow.

Adansedi nkrataa

Mprempren nneɛma ho nsɛm no kyerɛ SGS ne ISO 9001:2008. Ɛsɛ sɛ wɔsi adansedie a ɛfa adwuma pɔtee bi ho, honam fam agyapadeɛ ho amanneɛbɔ ne nkrataa a ɛkyerɛ sɛ wɔdi mmara so no so dua ma polycarbonate krataa so nsɛm , ne kɛseɛ, ne kɔla ne ne destination-market ahwehwɛdeɛ pɔtee.

Ɛfa HSQY Plastic Kuw ho

HSQY Plastic Group ka bɛboro mfeɛ aduonu osuahu na ɛyɛ adwumayɛbea 8, de plastic nneɛma a wɔde kyekyere nneɛma, adansiɛ, aduruyɛ ne mfiridwuma mu dwumadie ma.

Wɔ greenhouse nnwuma ho no, HSQY betumi asusuw multiwall nhyehyɛe, panel thickness, dimensions, kɔla, UV ahobammɔ, optical ahwehwɛde, wim tebea, packaging ne amanaman ntam delivery ahwehwɛde ho.