Na Aluminium Trays Oven-sef !

Yu tink se Aluminium Trey dɛn Sef fɔ Ɔvin?

Yes, bɔku pan di aluminiɔm we gɛt it-grɛd trey dɛn sef fɔ yuz na kɔvɛnshɔnal ɛn kɔnvɛkshɔn ɔvin we yu fala di tre di tɛmpracha limit we di wan we mek am gi ɛn di instrɔkshɔn dɛn we yu ɔvin gi. Aluminium de handle normal baking en roasting temperechur gud, bot tin disposable trey dɛn kin bend wen dem ful, koting en lid kin get lower hot limit, en di tre no eva toch wan heating element or cover di oven floor.

Fɔ mek yu gɛt sef rizɔlt, pul ɛni plastic ɔ kadbɔd lid, sɔpɔt wan fleksibul fɔyl tre pan wan baking sheet matirial , yuz ɔvin mit ɛn tu an, ɛn chɛk di pak bifo yu ɔt. Dis gayd de ɛksplen we aluminiɔm trey dɛn de wok fayn, ustɛm fɔ pik ɔda matirial, ɛn aw i sef fɔ ɔvin CPET trey dɛn kɔmpia.

Wetin Mek Trey Sef fɔ Ɔvin?

Wan ɔvin-sef tre fɔ telɛ di tɛmpracha ɛn di tɛm we i want fɔ kuk we i nɔ mɛlt, layt, fri komponent dɛn we nɔ fayn, ɔ lɔs inof trɛnk fɔ tɔn di it. Di kɔmplit paket impɔtant—nɔto di tre bɔdi nɔmɔ. Lid, kɔtin, handel, adeziv, siling film, ɛn print lɛbl kin gɛt difrɛn tɛmpracha limit.

Di Raytin fɔ di Tɛmpratura

Aluminium kin mɛlt we i rich lɛk 660°C (1,220°F), we pas di ɔdinari ɔvin ɔvin we dɛn kin yuz na os. Bɔt da mɛlt pɔynt de nɔto di tre ’s rɛkɔmɛnd ɔpreshɔn tɛmpracha. Tin kɔnstrɔkshɔn, tin dɛn we nɔ de stik, tin dɛn we dɛn kin yuz fɔ mek tin dɛn we gɛt kɔlɔ, lid dɛn, ɛn tin dɛn we dɛn nid fɔ kɔntakt wit it, ɔl dis kin mek di tɛmpracha we dɛn alaw go dɔŋ. Trit di limit we di manifakta dɔn tɔk as di valyu we de kɔntrol.

Tiknɛs ɛn Strukchɔral Sɔpɔt

Hevi-duti aluminium trey dɛn na mɔ rigid ɛn izi fɔ muv we dɛn lod. Bɔku tɛm, di kɔntena dɛn we dɛn kin yuz fɔ mek tin dɛn we dɛn kin yuz fɔ mek tin dɛn, nɔ kin izi fɔ put dɛn na ɔvin bɔt dɛn kin fleks ɔnda kasrɔl, sos, ɔ ros. Put wan tin tre pan wan flat baking sheet matirial bifo yu ful am, dɔn muv ɔl tu di pis togɛda. Dis de ridyus di bɛnd ɛn kech aksidɛntal spil.

Klia Instrɔkshɔn dɛn we Sef fɔ Ɔvin

Luk fɔ simbul we sef fɔ ɔvin, maksimal tɛmpracha, tɛm fɔ ɔt, ɛn instrɔkshɔn fɔ pul ɔ pul di lid. If di tre nɔ gɛt mak ɔ i gɛt kɔtin, lid, ɔ handel we yu nɔ no, kɔntak di pɔsin we de gi di it ɔ transfa di it to kuk we dɛn rayt klia wan.

Yu kin Put Aluminium Trey dɛn na di Ɔvin?

Yu kin nɔmal fɔ put aluminiɔm we gɛt it-grɛd tre na di sɛnt ɔvin rɛk. Mek shɔ se i sidɔm flat, nɔ tɔch di ɔvin wɔl ɔ di tin dɛn we de mek i wam, ɛn lɛf inof ples fɔ mek di briz go ɔlsay. Nɔ put aluminiɔm dairekt na di ɔvin flo pas di wan we mek di aplayans alaw am klia wan.

Bifo di Trey Go Insay di Ɔvin

• Chek se di tre na fud-grɛd, i nɔ pwɛl, ɛn i gɛt lɛbl fɔ yuz na ɔvin.

• Rimov plastic, pepabɔd, ɔ fim kɔmpɔnɛnt dɛn pas dɛn instrɔkshɔn spɛshal alaw fɔ ɔt ɔvin.

• Put fleksibul dispɔzabl trey dɛn pan wan baking sheet matirial bifo yu ad it.

• Lɛf edspɛs fɔ it dɛn we de bɔbul, rayz, ɔ rilis wata.

• Fɔ fala di risɛp, tre lɛbl, ɛn ɔvin manyual; yuz di lɔs aplikebul tɛmpracha limit.

We Yu De Kuk ɛn Rimov di Trey

Aluminiɔm kin kɔndɔkt ɔt kwik kwik wan, so di tre ɛn ɛni rim we dɛn fold kin wam. Yuz dray oven mit ɛn sɔpɔt di bays wit wan baking sheet matirial . Pul di rek pat pat fɔ go bifo pas fɔ rich dip insay di ɔvin, ɛn kip di tre lɛvɛl we di it gɛt ɔt wata.

Tayp dɛn fɔ Aluminium Trey ɛn Dɛn Ɔvin Sefty

Hevi-Duty Aluminium Trey dɛn we dɛn kin yuz fɔ mek tin dɛn

Hevi-duti trey dɛn gɛt tik wɔl ɛn riinfɔs rim. Dɛn kin fayn fɔ it ros, kash, pat fɔ it, ɛn ɔda ebi ebi it dɛn. Aluminium bakeware we yu kin yuz bak kin telɛ bɔku bɔku ɔvin sɛtin, bɔt di kɔtin, handel, ɛn instrɔkshɔn dɛn we di wan we mek am stil de sho di say we sef.

Tray dɛn we dɛn kin yuz fɔ mek aluminiɔm we dɛn kin yuz wan tɛm nɔmɔ

Disposable trey dɛn na layt, i izi, ɛn dɛn kin mek am fɔ bek ɔ fɔ ɔt bak. Di men tin we dɛn nɔ ebul fɔ du na di rigidity pas di aluminiɔm in mɛlt pɔynt. Nɔ es ful dispɔzabl tre bay wan ɛj, ɛn nɔ yuz am bak if i pank, bad bad kris, pit, ɔ nɔ ol in shep igen.

Trey dɛn we dɛn kɔt ɛn Trey dɛn we gɛt Lid

Wan aluminiɔm we dɛn kɔt tre kin gɛt ɔt limit we smɔl pas bare aluminiɔm. Fɔyl lid dɛn kin bi ɔvin, bɔt plastic film, klia lid, pepabɔd lid, lɛbl, ɛn adeziv sil bɔku tɛm nɔ kin bi. Fɔ fala di tin dɛn we dɛn se fɔ pak fɔ no if yu fɔ pul wan lid, lus am, kɔt am, ɔ chenj am.

Aluminium Tray Temperatur Gayd

No single maksimal temperechur de fo evri aluminium tre . Bɔku pan di tin dɛn we dɛn kin yuz wan tɛm nɔmɔ dɛn kin yuz na ɔdinari tɛmpracha fɔ bek, bɔt di raytin we dɛn print fɔ pas wan jenɛral gaydlayn ɔltɛm. Konvekshɔn sɛtin kin kuk it fast, yet ɛni risɛp tɛmpracha ajɔstmɛnt fɔ fala di ɔvin ɔ rɛsipɛkt instrɔkshɔn pas fɔ fala blankit lɔ.

Tray Tayp	Tɛmpratura Gaydɛns	Friza-to-Ovin	Notis dɛn
Aluminium we gɛt ebi ebi wok	Fɔ fala di prɔdak raytin; bɔku pan dɛn fayn fɔ nɔmal os fɔ bek ɛn fɔ rost tɛmpracha.	Bɔku tɛm, if dɛn rayt am fɔ yuz.	I fayn fɔ it tin dɛn we ebi; chɛk di kɔtin ɛn di handel dɛn.
Aluminium we dɛn kin yuz wan tɛm nɔmɔ	Yuz am nɔmɔ insay di tɛmpracha ɛn tɛm we di wan we mek am dɔn tɔk bɔt.	Na we di paket alaw am nɔmɔ.	Put pan wan baking sheet matirial fɔ sɔpɔt.
Foil lid we nɔ gɛt plastic ɔ pepa	Fɔ fala di lid ɛn tre instrɔkshɔn dɛn.	If di pɔsin we de gi di tin gri fɔ du dat.	Rimov, lus, ɔ vent we dɛn tɛl yu; avɔyd tin dɛn we de mek yu wam.

Broyla dɛn kin mek di tin dɛn we dɛn kin kuk, gɛt big wam we de shayn. Yuz aluminiɔm tre ɔnda brɔyla nɔmɔ if di prɔdak ɛn aplayans instrɔkshɔn dɛn alaw am, mentɛn di kliarens we dɛn dɔn tɔk bɔt, ɛn monitar di it ɔltɛm.

We Yu Nɔ Fɔ Yuz Aluminium Trey

Insay Maykrowev we Nɔ Gɛt Spɛshal Instrɔkshɔn

As wan jenɛral lɔ na os, nɔ put mɛtal pan ɔ fɔyl trey dɛn na maykrowev. Sɔm spɛshal fɔyl paket dɛn kin bi maykrowev ɔnda prɛsis kɔndishɔn, bɔt yuz dɛn nɔmɔ we di it paket ɛn di wan we mek maykrowev gi instrɔkshɔn. If yu nɔ shɔ, transfa di it to wan glas ɔ sɛramik kɔntena we nɔ gɛt maykrowev.

Na di Oven Floor ɔ Agens wan Hɛt Ɛlimɛnt

Nɔ layn di ɔvin flo wit aluminiɔm ɔ put tre dairekt pan am pas di aplayans manyual alaw dis klia wan. Aluminium kin trap di wam, blok di say dɛn we di briz kin kɔmɔt, pwɛl di ɔvin, ɛn i kin ambɔg di we aw di briz de kɔmɔt. Nɔ ɛva alaw tre fɔ tɔch wan ɔt ɛlimɛnt we de na do.

Ova Dairekt Stovtɔp ɔ Gril Hɛt

Wan dispɔzabl ɔvin tre nɔ kin sef ɔtomɛtik fɔ bɔna, hotplet, ɔ opin flaym. Dairekt ɔt kin mek hot spat, wik wan tin bays, layt gris, ɔ mek gris rɔsh. Yuz kuk we dɛn rayt spɛshal fɔ di stovtɔp ɔ gril sɛtup we dɛn want.

Fɔ Lɔng Kɔntakt wit Asid ɔ Rili Sɔl Fɔd

Tomato, sitrus, vinega, ɛn sɔl sos kin riak wit bare aluminiɔm, mɔ we dɛn de kuk ɔ kip am fɔ lɔng tɛm. Dis kin mek i gɛt pit, in kɔlɔ kin chenj, ɔ i kin mek i gɛt mɛtal flawa. Di USDA notis se dɛn nɔ kin tek di aluminiɔm sɔl dɛn we kin kɔmɔt de as sef prɔblɛm, bɔt wan kɔntena we nɔ gɛt riaktiv, sɛramik, stenlɛs stiɛl, we dɛn kɔt, ɔ we gɛt fayn layn kin gi bɛtɛ kwaliti.

Situeshɔn	Yuz Aluminium Trey?	Ɔda we we Sef ɔ we Fayn Mɔ
Maykrowev we dɛn kin yuz fɔ ɔt	Jɛnɛral wan nɔ, pas nɔmɔ dɛn gri fɔ am spɛshal wan.	Glas, sɛramik, ɔ plastic we gɛt rayt fɔ yuz maykrowev.
Dairekt stovtɔp ɔ opin-flɛm ɔt	Nɔ, pas nɔmɔ dɛn mek am fɔ da we de fɔ yuz am.	Rated stenlɛs stiɛl, kas ayɛn, ɔ gril kuk.
Layna we de na di ɔvin-flɔ	Nɔ, pas nɔmɔ di ɔvin manyual alaw am.	Put wan baking sheet matirial pan wan rek we de dɔŋ.
Fɔ kuk fɔ lɔng tɛm ɔ fɔ kip it we gɛt asid	Nɔto fɔ lɛk am wit bare aluminiɔm.	Glas, seramik, stenlɛs stiɛl, ɔ wan kɔmpitabl layn tre .

Di bɛnifit dɛn we yu go gɛt we yu yuz Aluminium Trey dɛn na di Ɔvin

• Fast ɔt transfa: Aluminium de ansa kwik kwik wan to ɔvin ɔt ɛn i kin ɛp fɔ mek it brawn fayn fayn wan.

• Low weight: Trey dɛn fayn fɔ it, tek-away, fɔ pripia it, ɛn transpɔt.

• Nɔ brok: Aluminium kin dent ɔ bɛn, bɔt i nɔ kin brok lɛk glas ɔ sɛramik.

• Di tin dɛn we yu kin pik frɔm friza to ɔvin: Aluminium paket dɛn we gɛt rayt rayt kin ol frɔzɛn it dɛn ɛn afta dat dɛn kin wam dɛn we dɛn nɔ transfa di it.

• Risaykul pɔtnɛshɛl: Klin aluminiɔm na tin we bɔku pipul dɛn kin risaykul, pan ɔl we di we aw dɛn kin aksept ɛn pripia am kin difrɛn bay di lokal program.

Ficha	Aluminium Trey	Glass Dish	Sɛramik Dish
Ɔt rispɔns	I kin wam kwik kwik wan.	I de wam sloslo ɛn i de kip di ɔt.	I de ɔt sloslo ɛn i de kip di ɔt fayn fayn wan.
Brek risk	I nɔ de brok bɔt i kin bɛn.	I kin shat frɔm impak ɔ tɛmal shɔk.	I kin chip ɔ krak.
Di kɔst fɔ di fɔs tɛm	Usually low fɔ dispɔzabl trey dɛn .	I ay pas am bɔt i kin yuz am bak.	I ay pas am bɔt i kin yuz am bak.
Risaykul / ɛnd ɔf layf	Bɔku tɛm, dɛn kin yuz am bak we dɛn klin ɛn dɛn kin gri wit am na di say we dɛn de.	Lɔng layf we pɔsin kin yuz bak; dɛn nɔ kin tek di glas we dɛn kin yuz fɔ kuk wit kɔntena glas.	Lɔng layf we pɔsin kin yuz bak; nɔ kin rili aksept am na kɔbsayd risaykul.
Yuz frɔm friza to ɔvin	Available wen dɛn rayt am spɛshal wan.	Na if di instrɔkshɔn dɛn fɔ di prɔdak alaw am nɔmɔ.	Na if di instrɔkshɔn dɛn fɔ di prɔdak alaw am nɔmɔ.

Kɔmɔn Aluminium Trey Mistek dɛn we yu fɔ Avɔyd

Fɔ ful-ɔp wan Fleksibul Trey pasmak

Ɔvafil de mek wan tre at fɔ lif ɛn i de mek di chans fɔ bɔbul ova. Lɛf inof edspɛs fɔ di rɛsipɛkt, sɔpɔt likwid-hɛvi dish dɛn wit baking sheet matirial , ɛn nɔ abop pan tin rim as handel.

Yuz wan Trey we dɔn pwɛl

Trowe wan dispɔzabl tre wit ol, shap kray, siriɔs kris, kɔrɛshɔn, ɔ rim we wik. Di damej kin mek i nɔ ebul fɔ sɔpɔt ɔt it ivin we di aluminiɔm stil de mek i nɔ wam.

Lɛf wan Lid we Nɔ De Ɔvin we Dɛn Ataya

Fɔyl tre kin sef fɔ ɔvin we in klia lid, bod kɔva, sil, ɔ lɛbl nɔ de. Rimov ɔl di kɔmpɔnɛnt dɛn we nɔ rayt klia wan fɔ di ɔt we yu dɔn pik.

Storing Riaktiv Fɔd insay Bare Aluminium

Ivin if dɛn kuk tomato ɔ sitrus dish insay aluminiɔm, transfa di tin dɛn we lɛf to kɔntena we nɔ de riaktiv fɔ mek dɛn kip am fɔ lɔng tɛm. Dis kin ɛp fɔ kip di we aw i luk ɛn di flawa ɛn i kin mek di pit nɔ bɔku.

Aluminium Foil Trays vs. Ɔda Matirial dɛn we Sef fɔ Ɔvin

Pik di tin dɛn we de arawnd di it, di we aw dɛn de ɔt am, di tin dɛn we dɛn nid fɔ sheb, ɛn di plan fɔ yuz am bak. Aluminium na tin we pɔsin kin kɛr go ɛn i kin wam kwik kwik wan. Glas ɛn sɛramik kin yuz bak ɛn dɛn nɔ kin riaktiv bɔt dɛn kin ebi ɛn dɛn kin brok. Ɛvri prɔdak stil nid in yon tɛmpracha ɛn tɛmral-shɔk instrɔkshɔn.

Feature	aluminium foil trey	glas	seramik
Maksimal tɛmpracha	Difrɛn bay tre , kɔtin, ɛn lid.	I kin difrɛn bay di wan we mek am ɛn di wan we dɛn mek.	I kin difrɛn bay di wan we mek am, di glaz, ɛn di prɔdak.
Yuz friza	Bɔku tɛm, i kin fayn fɔ du am.	Na we dɛn rayt am nɔmɔ; avɔyd fɔ mek yu gɛt tɛmal shɔk.	Na we dɛn rayt am nɔmɔ; avɔyd fɔ mek yu gɛt tɛmal shɔk.
Yu kin yuz am bak	Limitɛd fɔ dispɔzabl prɔdak dɛn.	Ay wit di rayt kia.	Ay wit di rayt kia.
Pɔtabiliti we pɔsin kin kɛr go	Ay; i nɔ gɛt bɛtɛ wet.	Ridyus; ebi ɛn i kin brok.	Ridyus; ebi ɛn i kin brok.
Asid it kompitibiliti	I kin riak if i nɔ gɛt natin ɛn i kin kɔntakt fɔ lɔng tɛm.	Jɛnɛral wan nɔ-riaktiv.	Jɛnɛral wan nɔ-riaktiv we di glaz na it-sef ɛn intakt.

CPET fud tre na Bɛtɛ Oven-Sef Opshɔn?

CPET tinap fɔ kristaliz polyethylene terephthalate. Nɔ lɛk ɔdinari PET tek-away kɔntena dɛn, dɛn mek am fayn fayn wan CPET trey dɛn fɔ ay-tɛmpracha it aplikeshɔn dɛn. Dɛn kin bi strɔng opshɔn fɔ pripia it dɛn we nid wan rigid, sial paket fɔ friz, frij distribyushɔn, maykrowev rihit, ɛn kɔmɔn ɔvin ɔt.

CPET nɔto mɛtal ɛn i nɔ de riak wit asid it di sem we lɛk bare aluminiɔm. I kin sɔpɔt bak liding film dɛn we dɛn kin sial wit ɔt ɛn fɔmat dɛn fɔ it we dɛn kin put insay kɔmpawtmɛnt. Ovin ɛn maykrowev pefɔmɛns fɔ stil verify fɔ di ɛksaktɔ tre , siling film, it, tɛmpracha, ɛn ɔt tɛm.

Ficha	CPET Fɔd Trey fɔ it	Aluminium Trey
Tɛmpratura rɛnj	HSQY CPET prodakt: -40°C to +220°C; kɔnfɔm di ɛksaktɔl spɛsifikɛshɔn.	Difrɛn bay tre , kɔtin, lid, ɛn manifakta.
Yuz maykrowev	Yɛs, we dɛn mek di kɔmplit paket fɔ am.	Jɛnɛral wan nɔ pas if patikyula paket ɛn aplayans instrɔkshɔn dɛn alaw am.
Yuz frɔm friza to ɔvin	Dɛn mek am fɔ dis yus we dɛn spɛsifa am.	Avaylabl wit suitably rated trey dɛn .
Asid it kompitibiliti	Nɔn-riaktiv fɔ di it kɔntakt we dɛn bin want.	Bare aluminium kin chenj in kɔlɔ ɔ pit we i de kɔntakt fɔ lɔng tɛm.
Opshɔn dɛn fɔ sidɔm wit ɔt	Opshɔn dɛn we kɔmpitabl de.	Fɔyl, bod, ɛn film lid opshɔn dɛn kin difrɛn bay di pɔsin we de gi am.

HSQY Plastik Grup Oven-Sef CPET Solushɔn dɛn

CPET Trey dɛn we dɛn kin ɔvin

HSQY Plastik Grup suplies CPET ovenable trey dɛn we dɛn mek fɔ kɔvɛnshɔnal ɔvin, maykrowev, kol stɔrɔj, ɛn frɔzɛn aplikeshɔn. Di stet ɔpreshɔn rɛnj na -40°C to +220°C, sɔbjɛkt to di ɛksaktɔl prodakt spɛsifikɛshɔn ɛn ɔt kɔndishɔn.

Di kɔnfigyushɔn dɛn we de na rɛktangul, skwea, ɛn rawnd fɔmat dɛn we gɛt wan, tu, ɔ tri kɔmpawtmɛnt dɛn. Kɔmpatibl silin-film opshɔn dɛn kin sɔpɔt lik rɛsistɛns, branding, freshnɛs, porshɔn kɔntrol, ɛn rɛdi-mil prodakshɔn fɔ aylayn ketɛning, skul, bekeri, supamakit, ɛn it manifakta dɛn.

Ficha	Spɛsifikeshɔn
Tɛmpratura rɛnj	-40°C to +220°C
Kɔmpatmɛnt dɛn	1, 2, ɔ 3; kɔstɔm opshɔn dɛn we de
Shep dɛn	Rɛktangul, skwea, ɛn rawnd
Ebul fɔ du	750 ml, 800 ml, ɛn ɔda kɔstɔm saiz dɛn
Kɔlɔ dɛn	Blak, wayt, natura, ɛn kɔstɔm kɔlɔ dɛn
Aw a luk	Glossy, prɛzɛnt-grɛd finish
Sil kɔmpatibiliti	Fim dɛn we kɔmpitabl we nɔ de lik, inklud di opshɔn dɛn we dɛn print bay dɛnsɛf
Aplikeshɔn dɛn	Aylayn ketɛning, skul it, rɛdi it, ɛn bekeri pak
Risaykul we pɔsin kin yuz	Dɛn mek am wit tin dɛn we dɛn kin yuz bak; di lokal kɔlɛkshɔn we dɛn kin gɛt kin difrɛn

Ovenable CPET Plastik Trey fɔ Rɛdi-Mil Pakɛj

Fɔ pripia-fud brand dɛn, wan ovenable CPET ready-meal tre kin sɔpɔt filin, sial, chill ɔ frɔzɛn distribyushɔn, ɛn kɔshɔma rihit insay wan paket. Dis de ridyus di transfכm fכ it we i de mεnten di pat prεzεntεshכn εn shelf apil.

We yu de pik wan tre , gi di kayn it, fil tɛmpracha, stɔrɔj ​​tɛmpracha, di we aw dɛn de ɔt, maksimal tɛm ɛn tɛmpracha, di tin dɛn we dɛn nid fɔ sial, di sayz fɔ di pat, ɛn di kwantiti we yu de op fɔ ɔda. Dɛn ditil ya de ɛp fɔ mek di tre ɛn lidding sistɛm mach to di kɔmplit aplikeshɔn.

Kwɛstyɔn dɛn we Dɛn Kin Aks Bɔku tɛm

Yu tink se dispɔzabl aluminiɔm trey dɛn kin go na di ɔvin?

Yes, we di tre na fud-grɛd ɛn dɛn rayt am fɔ yuz na ɔvin. Rimov di lid dɛn we nɔ de ɔvin, de insay di tɛmpracha ɛn tɛm we dɛn dɔn tɔk bɔt, ɛn put wan fleksibul tre pan wan baking sheet matirial .

Us tɛmpracha sef fɔ wan aluminiɔm tre ?

Di kɔrɛkt maksimal tɛmpracha na di wan we di tre manifakta print. Aluminium we nɔ gɛt natin kin bia wit nɔmal ɔvin ɔt, bɔt tin kɔnstrɔkshɔn, kɔtin, lid, ɛn ɔda tin dɛn we dɛn kin yuz fɔ mek di paket kin gɛt smɔl limit.

Yu tink se aluminiɔm trey dɛn kin go na kɔnvɛkshɔn ɔvin?

Jɛnɛral wan, na yɛs. Kip ples rawnd di tre fɔ mek di briz flɔ ɛn fala di tre , ɔvin, ɛn rɛsipɛkt instrɔkshɔn dɛn. Wan risɛp kin rikɔmɛnd fɔ mek di kɔnvɛkshɔn tɛmpracha smɔl ɔ fɔ mek yu kuk shɔt, bɔt dis na fɔ ajɔst di kuk pas fɔ mek yu yuz ɔlman na aluminiɔm sefty lɔ.

Yu tink se aluminiɔm trey dɛn kin kɔmɔt na friza go na di ɔvin?

Bɔku it-grɛd aluminiɔm trey dɛn kin, bɔt di kɔmplit paket fɔ gɛt rayt fɔ yuz frɔm friza to ɔvin. Rimov ɔ vent di lid as dɛn dayrɛkt ɛn sɔpɔt wan fleksibul tre we yu de transfa.

Yu kin bek it we gɛt tomato ɔ asid insay aluminiɔm tre ?

Yu kin, bɔt if yu tɔch di aluminiɔm we nɔ gɛt natin fɔ lɔng tɛm, i kin mek yu gɛt pit, yu kɔlɔ kin chenj, ɔ i kin mek yu gɛt mɛtal flawa. Fɔ kuk ɔ kip fɔ lɔng tɛm, pik glas, sɛramik, stenlɛs stiɛl, CPET , aluminiɔm we dɛn kɔt, ɔ layna we go gri wit am.

Yu tink se wan aluminiɔm tre kin go na di maykrowev?

Jɛnɛral wan, nɔ. Yuz aluminiɔm paket na maykrowev nɔmɔ we di paket instrɔkshɔn ɛn maykrowev manyual alaw am spɛshal wan. If nɔto dat, transfa di it to kɔntena we sef fɔ maykrowev.

Yu tink se wan dispɔzabl aluminiɔm tre fɔ go pan wan baking sheet matirial ?

Yes, dis na rεkomεnd fכ tin כ hεvi ful trey dɛn . Di baking sheet matirial de impruv stebiliti, mek handel sef, en kech spil.

Wetin mek yu pik CPET trey dɛn insted ɔf aluminiɔm trey dɛn ?

CPET kin kam togɛda friza, maykrowev, ɛn kɔvɛnshɔnal-ɔvin pefɔmɛns wit rigid shep, kɔmpawtmɛnt, ɛn fim dɛn we dɛn kin sial wit ɔt. I nɔ de riaktiv bak wit it dɛn we gɛt asid. Aluminium de stil yusful we fast ɔt transfa, lɔw wet, ɛn established risaykul strim na prɔyorities.

Dɔn

Mɔs pan di aluminiɔm we dɛn kin yuz fɔ it-grɛd trey dɛn kin sef fɔ ɔvin we dɛn yuz am insay dɛn limit we dɛn rayt. Sɔpɔt tin trey dɛn , pul di lid dɛn we nɔ fayn, kip aluminiɔm fa frɔm di tin dɛn we de ɔt ɛn di ɔvin flo, ɛn pik wan kɔntena we nɔ riaktiv fɔ kɔntakt fɔ lɔng tɛm wit it dɛn we gɛt asid. Fɔ it rɛdi it dɛn we nid friza, maykrowev, ɛn kɔmɔn ɔvin kɔmpatibiliti, fɛn ɔltin HSQY Plastik Grup CPET trey dɛn ɔ kɔntak wi tim fɔ tɔk bɔt wetin yu nid fɔ pak.