Pvc gipsum siling film

PVC Gypsum Siling Film fɔ Dekorativ Siling Tayl

HSQY de mek dɛkɔretiv PVC jipsam siling film fɔ lamin gipsum siling tayl, jipsam bod, minral fayba bod, simen bod ɛn ɔda intɛriɔ siling sabstret.

Di fim de gi wan dɛkɔretiv, smol ɛn izi fɔ klin sɔfays fɔ sɔspɛnd siling tayl dɛn we dɛn kin yuz na ɔfis, shɔp, ɔtel, skul, ɔspitul, rɛstɔrant, rɛzidɛshɔnal intɛriɔ ɛn ɔda kɔmɛshɔn bildin dɛn.

Di standad prodak gɛt nominal tik we na lɛk 0.075mm, standad wit we na 1220mm ɛn rɛfrɛns rol lɔng we na 500m. Tiknes, wit, rol lɔng, patɛn, kɔlɔ ɛn sɔfayz finish dɛn we dɛn kɔstɔmayz de akɔdin to di prodakshɔn prɔses ɛn ɔda kwantiti.

Dɛn kin mek pas 100 dizayn dɛn fɔ dekɔret, we gɛt wayt, pal, mabul, wud gren, mɛtal, jɔyometrik, flawa, ɛmbos, ay-glos ɛn tri-dimɛnshɔnal vijual ifɛkt dɛn.

Dis prodak na lamination film fɔ mek PVC-fes jipsam siling tayl. I nɔto siling mɛmbran we dɛn kin strɛch wit ɔt we dɛn kin instɔl dairekt insay di trak dɛn we de rawnd di wata.

Nɔmal wan dɛn kin bon di fim to di fes fɔ wan jipsam bɔd we dɛn dɔn pripia bay we dɛn de yuz wan kɔmpatib adhesive ɛn hot-pres ɔ kol-lamination prɔses. Dɔn dɛn kin kɔt di siling tayl we dɔn dɔn, ed-finish am, pak am ɛn instɔl am insay wan fayn T-grid siling sistem.

Standart dɛkɔretiv fim nɔ fɔ ɔtomɛtik diskrayb as fayapruf, watapruf fɔ ɔltɛm ɔ fayn fɔ ɛvri bildin prɔjek. Flame-retardant, low-VOC ɛn restricted-substance-controlled gred dɛn nid sɛpret spɛsifikɛshɔn ɛn sɔpɔt tɛst ripɔt.

Ɛksplɔrɔ ɔda tin dɛn HSQY embossed PVC film prodakt ɔ kɔntakt HSQY fɔ wan kɔstɔmayz siling-film patɛn ɛn prodakshɔn sampul.

Rikwest PVC Siling Film Prayz    Rikwest Patna Samples

PVC gipsum siling film imej dɛn

Wetin Na PVC Jipsam Siling Film?

PVC jipsam siling film na wan tin we dɛn print ɔ ɛmbos polyvinyl klorayd dɛkɔretiv film we dɛn kin yuz as di visible fes layt fɔ laminated jipsam siling tayl ɛn rilat intɛriɔ bod dɛn.

We dɛn de mek di siling-tayl, dɛn kin pul di fim frɔm wan rol, kɔt am wit ɔ kɔntakt am wit wan aprɔpriet adeziv, alaynɛd ​​wit di sabstret ɛn lamin am pan di bɔd we dɛn dɔn pripia.

Di fim de mek di kɔlɔ, pɔtn, glos ɛn tɛkstɔr we dɔn dɔn fɔ di siling tayl. I kin bak fɔ mek di say we di bɔdi klin fayn ɛn i kin mek di mɔstɔ kɔntakt dairekt wit di fɔs fes pan di jipsam bɔd.

Di siling bod we dɔn dɔn kin jɔyn wan PVC dɛkɔretiv fes, jipsɔm ɔ ɔda bod sabstret, edj tritmɛnt ɛn wan mɛtal ɔ aluminiɔm-fɔyl bak akɔdin to di siling manifakta in dizayn.

Di prodakt de diskraib bak as PVC siling lamination film, embossed PVC film fɔ jipsam tayl, dɛkɔretiv PVC siling fɔyl, PVC fes film ɛn PVC jipsam-bɔd film.

PVC Gypsum Siling Film Spesifikasi

Faynal spɛsifikɛshɔn fɔ no di nominal tiknes, tolɛreshɔn, wit, rol lɔng, kɔr dayamita, rol wet, wayndin dairekshɔn, patɛn nɔmba, kɔlɔ standad, glos, ɛmbos, adhesive sistem ɛn intended sabstret.

PVC gipsum siling film vs. PVC stret siling membran

Di wan dɛn we de bay nɔ fɔ yuz di tu wɔd dɛn fɔ chenj bikɔs di tik we dɛn nid, di fleksibiliti, di prɔsesin ikwipmɛnt, di instɔleshɔn sistɛm ɛn di pefɔmɛns tɛst dɛn difrɛn.

Dekorativ Kɔlɔ, Patɛn ɛn Surface Finish

Pɔtn sɛlɛkshɔn fɔ kɔnfyus yuz fizik sampul bikɔs skrin displei nɔ kin ebul fɔ riprodyuz glos, mɛtal ifɛkt, ɛmbos dip ɔ fayn kɔlɔ kɔrɛkt wan.

Gypsum Bod Lamineshɔn Prɔses

Bɔd Surface Prɛparashɔn

Di jipsɔm bod sɔfays fɔ flat, klin, dray ɛn nɔ gɛt pepa fayv we lɔs, dɔst, ɔyl ɛn dɔti we go mek di adhesive trɛnk nɔ bɔku.

Adhesive Aplikeshɔn fɔ Adhesive

Dɛn fɔ pik wan kɔmpitabl adeziv akɔdin to di PVC fɔmyulashɔn, di bod fes, laminɛshɔn spid, we fɔ mɛn ɛn di ɔt ɛn humiditi rɛsistɛns we dɛn nid.

Film Alignment ɛn Tɛnshɔn

di wεb fכ de sεntrεd εn כnda kכntrol tεnshכn fכ mek i nכ wrinkles, patεn distorshכn, εj mislaynmεnt εn tεliskop.

Hot ɔ Kol Laminɛshɔn

Tempracha, prɛshɔn, nip kɔndishɔn ɛn layn spid fɔ ajɔst fɔ ajɔst yunifom bondin we nɔ go shrink, strɛch, blista ɔ damej di pɔtn we dɛn print.

Fɔ mɛn ɛn Kɔndishɔn

Laminated bod dɛn fɔ kɔndishɔn fɔ di tɛm we di adhesive spɔlayt in rɛkɔmɛnd bifo dɛn kɔt, stak, rap edj, tɛst ɔ ship.

Kɔt ɛn Ɛj Finishin

Di bod dɛn we dɔn dɔn kin kɔt insay standad siling-tayl saiz, trim ɛn ed-finish akɔdin to di skwea, tegula ɔ kɔstɔmayz profayl we dɛn nid.

Bɔd Sabstret dɛn we Kɔmpatibl

Surface Pɔfɔmɛnshɔn ɛn Mentɛnans

Sɔfays we I izi fɔ Klin

PVC surface we smol smol kin izi fɔ was pas jipsum bod we gɛt pepa fes we dɛn nɔ trit ɛn i kin ridyus di visibiliti fɔ dɔst ɛn layt stɛyn.

Frɔnt-Sɔfays Mɔstɔ Resistɛns

Di PVC layt kin ridyus dairekt mɔstɔ kɔntakt wit di frɔnt fes na di bod, bɔt kɔmplit wata rɛsistɛns dipen pan di sabstret, edj, jɔyn, bak, adeziv ɛn instɔleshɔn.

Stain ɛn Kwɛmyuɛl Resistans

Di rɛsistɛns to klin, ɔyl, disinfɛktan ɛn kɔnstrɔkshɔn kemikal dipen pan di PVC fɔmyulashɔn, printin ink, di tɛm we dɛn de ɛkspos ɛn tɛmpracha.

Skrat ɛn Abrashɔn Resistans

Yu kin skrach di fim we dɛn dɔn print fɔ dekɔret bay we yu de ol am wit abrasive. Dɛn fɔ protɛkt di bod dɛn we dɔn dɔn we dɛn de kɔt, stak, transpɔt ɛn instɔl.

Kɔlɔ ɛn Pɔtn we go de fɔ lɔng tɛm

Indo kɔlɔ durabiliti dipen pan ink, PVC fɔmyulashɔn, layt, ɔt ɛksplɔshɔn, klin kemikal ɛn prodakshɔn kɔntrol. Dairekt san layt ɔ yuz fɔ lɔng tɛm na do, yu nid fɔ tɛst am difrɛn we.

Faya Pɔfɔmɛnshɔn ɛn Bil Kɔmplians

Faya pefɔmɛns fɔ difayn yuz wan aplikebul tɛst standad ɛn di ɛksaktɔ tɛst prodak kɔnstrɔkshɔn.

Wan tɛst rizɔlt fɔ di jipsam bod, PVC fim ɔ adeziv nɔmɔ nɔ fɔ bi ɔtomɛtik wan we dɛn prɛzɛnt as di faya rɛytin fɔ di kɔmplit siling tayl ɔ di siling sistem we dɛn dɔn instɔl.

Di wan dɛn we de bay fɔ no di kɔntri we dɛn nid, di kayn prɔjek we dɛn nid, di we aw dɛn de du di tɛst, di klas we dɛn nid fɔ mek di flaym spred, di smok we dɛn nid ɛn di kɔmplit bɔd strɔkchɔ bifo dɛn pik wan fim we nɔ de mek faya.

Test ripɔt fɔ tɔk bɔt di PVC fɔmyulashɔn, nominal tiknɛs, kɔlɔ, print sɔfays, adeziv, sabstret, spɛshal ɔryenteshɔn ɛn tɛst rizɔlt.

Indo Envayrɔmɛnt ɛn Ristrikt-Sɔbstans Rikwaymɛnt

Di tin dɛn we dɛn nid fɔ bil kin difrɛn frɔm kɔntri ɛn di prɔjek. RoHS nɔ fɔ yuz as di praymar pruf fɔ bildin-prɔdakt ɔ indo-ɛya kɔmplians.

Dipen pan di dɛstineshɔn makit, di wan dɛn we de bay kin aks fɔ infɔmeshɔn bɔt REACH sɔbstans, ebi mɛtal, phthalate, fɔmaldehayd, volatil ɔrganik kɔmpawnd, smok jenɛreshɔn ɛn flame-retardant aditiv.

Di PVC film, ink, kɔtin, adeziv ɛn sabstret fɔ evalyu as kɔmplit laminated siling prodak usay dɛn nid fɔ fala di prɔjek.

Aplikeshɔn dɛn fɔ PVC Jipsum Siling Film

• Ɔfis siling: Wait, pal ɛn jɔyometrik siling-tayl dizayn fɔ kɔmɛshɔnal ɔfis dɛn.

• Ritayl intɛriɔ: Dɛkɔretiv siling tayl fɔ shɔp, shorum ɛn shopin sɛnta.

• Ɔtel dɛn: Mabul, mɛtal, ɛmbos ɛn prɛmiɔm dɛkɔretiv finish.

• Rɛstɔrant dɛn: I izi fɔ klin dɛkɔretiv siling sɔfays fɔ di ples dɛn fɔ it.

• Skul dɛm: Nyutral ɛn patɛn suspɛnd siling tayl fɔ klasrum ɛn pɔblik ples dɛm.

• Ɔspitul ɛn klinik dɛn: Smɔl siling sɔfays dɛn we de ɔnda di prɔjek hajɛns ɛn di tin dɛn we dɛn nid fɔ fala.

• Rezidenshɛl intɛriɔ: Dɛkɔretiv jipsɔm siling tayl fɔ kichin, living eria ɛn kɔridɔ.

• Pɔblik bildin dɛn: Siling sistem fɔ risepshɔn eria, hal ɛn kɔmyuniti fasiliti.

• OEM siling-tayl prodakshɔn: Kastamayz patɛn fɔ lokal gypsum-bɔd ɛn siling-tayl manifakta dɛn.

PVC Film, Aluminium Foil ɛn Finished Siling Tayl Strukchɔ

Kwaliti-Kɔntrol Tɛst dɛn we Dɛn Rikɔmɛnd

• PVC resin, aditiv ɛn fɔmyulashɔn verifyeshɔn.

• Nominal tik ɛn tik tolɛreshɔn.

• Rol wit ɛn wit tolɛreshɔn.

• Rol lɔng, rol wet, kɔr dayamita ɛn ɔdasay dayamita.

• Winding dairekshɔn, winding tɛnsiɔn, tɛliskɔp ɛn ed alaynɛshɔn.

• Rifrɛns besis wet ɛn batch kɔnsistɛns.

• Patna nɔmba, kɔlɔ ɛn batch-to-batch kɔlɔ difrɛns.

• Patna ripit lɔng ɛn rɛjista akkuracy.

• Glos, mat levul ɛn embos dip.

• Ink adhesion, rubbing resistans ɛn klin resistans.

• Skrat na di surface, blak spat, jel, ol, wrinkles ɛn kɔntaminɛshɔn.

• Dimenshɔnal chenj ɔnda laminɛshɔn tɛmpracha.

• Adhesive wetin ɛn PVC-to-bɔd pil trɛnk.

• Bond ritɛnshɔn afta ɔt ɛn humiditi ɛksplɔshɔn.

• Resistans to blistering, bubbling, curling ɛn delamination.

• Finished-bod flatnɛs ɛn sag pefɔmɛns.

• Skrach, stɛyn ɛn kemikal-klin tɛst usay dɛn nid am.

• Flame, smok, VOC ɔ restricted-substance test fɔ spɛshal prɔjek dɛm.

• Katon, palet ɛn kɔntena-lod inspekshɔn.

Kastom PVC Siling Film Opshɔn dɛn

• Nominal 0.075mm gipsum siling film.

• Tiknes we dɛn kɔstɔmayz frɔm lɛk 0.06mm to 0.08mm.

• Standard 1220mm wit ɛn kɔstɔmayz rol wit.

• Rifrɛns 500m rol lɔng ɛn kɔstɔm rol lɔng.

• Customized pepa-kɔr dayamita ɛn rol wet.

• Print sayd in ɔ print sayd aut winding.

• Wait, pal, gold, silva, mabul, wud gren ɛn ston pɔtn.

• High-gloss, mat, frosted, pal ɛn ɛmbos finish dɛn.

• Di divɛlɔpmɛnt fɔ di kɔlɔ ɛn pɔtn we di kɔstɔma dɛn gi.

• Pattern swatches ɛn trayal rol fɔ lamination tɛst.

• Flame-retardant ɛn restricted-substance-controlled gred dɛn we dɛn kin tɛst.

• Kastomized katon, rol lebul, palet ɛn shiping mak.

Infɔmeshɔn we dɛn nid fɔ mek wan PVC Siling Film Quote

• Tik ɛn tolɛreshɔn we dɛn nid.

• Rikwayd rol wit ɛn wit tolɛreshɔn.

• Rikwayd rol lɔng, rol wet ɛn maksimal ɔdasay dayamita.

• Di dayamita we dɛn nid fɔ pepa-kɔr.

• Print sayd in ɔ print sayd aut winding dairekshɔn.

• Kɔlɔ, pɔtn nɔmba ɛn sɔfays finish.

• Rikwayd patɛn ripit lɔng ɛn rɛjista tolɛreshɔn.

• Jipsam bod, minral fayba bod, simen bod ɔ ɔda sabstret.

• Bod surface matirial ɛn mɔstɔ kɔndishɔn.

• Hot pres, kol lamination ɔ ɔda prodakshɔn prɔses.

• Adhesive tayp ɛn rɛfrɛns kot wet.

• Lamination temperechur, prɛshɔn ɛn layn spid.

• Rikwayd peel trɛnk ɛn humidity rɛsistɛns.

• Flame, smok, VOC ɔ restricted-substance standad dɛn we dɛn nid.

• Di kɔntri we dɛn de go ɛn di tin dɛn we dɛn nid fɔ du fɔ di prɔjek.

• Initial ɔda kwantiti ɛn ɛstimat ɛni ia dimand.

• Packing, destination port ɛn di de we dɛn nid fɔ sɛn am.

Send Yu PVC Siling Film Rikwaymɛnt dɛn

Pakɛj ɛn Delivri

Sampul pak: Dɛn kin protɛkt patɛn swatch ɛn smɔl trayal rol dɛn wit PE bag ɛn pak dɛn insay rigid katon.

Standard roll packing: Dɛn kin rap ɛni PVC film rol wit protɛktiv film ɛn pak am insay wan rawnd ɔ rɛktangul ɛkspɔt katon.

Kor protɛkshɔn: Dɛn kin protɛkt di rol ɛnd ɛn pepa kɔr fɔ ridyus di krɔsh, ed damej ɛn kɔntaminɛshɔn we dɛn de handle.

Palet pak: Dɛn kin stak katon dɛn pan plai wud ɔ fumigation-fri ɛkspɔt palet akɔdin to di rol dimɛnshɔn ɛn di we aw dɛn nid fɔ handle.

Kɔntena lod: Lod kwantiti dipen pan rol lɔng, katon dimɛnshɔn, palet arenjmɛnt, kɔntena tayp ɛn ligal wet ristrikshɔn.

Prodakshɔn lida tɛm: Stɛndad ɔda dɛn nɔmal fɔ nid lɛk 7-14 dez afta dɛn dɔn kɔnfyus di dizayn, spɛsifikɛshɔn, sampul, pak ɛn dipɔsit.

PVC gipsum siling film data sheet

Di data-shit ɛn tɛst-ripɔt link dɛn we dɛn gi wit di ɔrijinal pej de dɔŋ ya.

Bifo yu pablish, kɔnfɔm se dɛn dɔn ɔplod ɔl tu di PDF fayl dɛn ɛn dɛn de aplay to di rayt PVC film tik, kɔlɔ, pɔtn, fɔmyulashɔn ɛn di say we dɛn mek am.

   Daunlod PVC gypsum siling film data sheet

   Daunlod PVC Jipsum Siling Film Test Ripɔt

Sɛtifiket ɛn Kɔmplians Dɔkyumɛnt dɛn

Di dɔkyumɛnt dɛn we de kin gɛt di prɔdak spɛsifikɛshɔn, sefty data shit, ristrikt-sɔbstans ripɔt, fizik-prɔpati ripɔt, flame-tɛst ripɔt ɛn kwaliti-mɛnejmɛnt sɛtifiket.

SGS fɔ diskrayb akɔdin to di ɛksaktɔ tɛst we dɛn du pas fɔ prɛzɛnt am as yunivasal prodak sɛtifikeshɔn.

RoHS rili gɛt fɔ du wit di tin dɛn we de ambɔg di tin dɛn we de mek pipul dɛn sɔfa na ilɛktrik ɛn ilɛktronik ikwipmɛnt ɛn dɛn nɔ fɔ yuz am as di prinsipal pruf fɔ se dɛn de fala di tin dɛn we dɛn de yuz fɔ bil.

ISO 9001 na kwaliti-mɛnejmɛnt-sistim standad. I nɔ de indipɛndɛnt fɔ establish flaym, VOC, mɔstɔ, indo-ɛya ɔ envayrɔmɛnt pefɔmɛns fɔ di PVC fim.

Di pɔsin we gɛt di sɛtifiket, di say we dɛn mek am, di standad ɛdyushɔn, di skɔp ɛn di tɛm we i go wok bifo dɛn pablish ɛni sɛtifiket klem.

HSQY Globɛl Ɛgzibishin dɛn

Wetin Mek Yu Pik HSQY as Yu PVC Jipsam Siling Film Splaya?

• PVC dekorativ film we dɛn divɛlɔp fɔ gips siling-tayl lamination.

• Standart nominal tiknes we na aprɔksimatli 0.075mm.

• Standard 1220mm wit ɛn kɔstɔmayz wit.

• Rifrɛns 500m rol lɔng ɛn kɔstɔm rol fɔmat dɛn.

• I pas 100 wayt, mabul, mɛtal, wud-greyn ɛn ɛmbos dizayn dɛn.

• Ay-glos, mat, pal, frɔst ɛn tɛkstɔr sɔfays.

• Patna maching ɛn kɔstɔmayz kɔlɔ-divɛlɔpmɛnt sɔpɔt.

• Sampul fɔ adhesive ɛn lamination-layn tɛst.

• Customized pepa kor, rol weit en winding dairekshon.

• Kwaliti inspekshɔn agens aprɔv sɛmpul ɛn spɛsifikɛshɔn dɛn.

• Ekspɔt katon, palet ɛn intanashɔnal shiping sɔpɔt.

Bifo bulk prodakshɔn, HSQY rikɔmɛnd fɔ tɛst di fim we yu dɔn pik wit di kɔstɔma in aktual jipsam bod, adeziv, laminating ikwipmɛnt, opareshɔn tɛmpracha, prɛshɔn ɛn layn spid.

Kontakt HSQY fɔ Sampul ɛn Prayz

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt PVC Gypsum Ceiling Film

Wetin na PVC gypsum siling film?

Na wan tin we dɛn print ɔ ɛmbos PVC fim we dɛn lamin pan jipsam siling tayl ɔ bod fɔ gi di dekɔretiv say we pɔsin kin si.

PVC gypsum siling film na di sem wit stretch siling film?

Nɔ, dɛn kin lamin di jipsam siling fim pan wan rigid bod. Stretch siling membran de hεt εn tεnshכn insay di perimita trak dεm we nכ gεt jipsam-bכd sabstεrayt.

Yu tink se dɛn dɔn instɔl di PVC fim dairekt insay wan T-grid siling?

Nɔ, dɛn kin fɔs laminate di fim pan di jipsum siling tayl we dɛn de mek am. Dɔn dɛn kin instɔl di tayl we dɔn dɔn insay wan kɔmpatib T-grid sistem.

Wetin na di standad tik?

Di standad nominal tiknes na aprɔksimatli 0.075mm, wit kɔstɔmayz spɛsifikɛshɔn dɛn we de arawnd di 0.06-0.08mm rɛnj.

Wetin na di standad fim wit?

Di standad HSQY wit na 1220mm. Wi kin tɔk bɔt wan 1230mm waid ɛn ɔda kɔstɔmayt wit dɛn.

Wetin na di standad rol lɔng?

Di rεfrεns rol lεngth na aprכksimatli 500m, we di kכstכm lεngth dεm dipכnt pan di tik, wit, kכr εn maksimal rol wet.

Us dizayn dɛn de fɔ dekɔret?

Di tin dɛn we yu kin pik na wayt, pal, mabul, wud gren, ston, gold, silva, flawa, jɔyometrik, ɛmbos ɛn kɔstɔmayz print dizayn dɛn.

HSQY kin mach wan kɔstɔma in patɛn?

Yɛs. Di kɔstɔma dɛn kin gi wan fizik sampul, kɔlɔ rɛfrɛns ɔ dizayn fayl fɔ tɛknikal ɛn minim-ɔda ɛvalueshɔn.

Us surface finish dɛn de we dɛn kin gɛt?

Di finish dɛn we de inklud ay glos, sɛmi-glos, mat, pal, frɔst ɛn ɛmbos tɛkstɔr.

Yu tink se yu kin lamin di PVC film pan minral fayba bod?

I kin fayn afta dɛn dɔn tɛst di bod sɔfays, porositi, adhesive, akostik rikwaymɛnt ɛn prɔsesin kɔndishɔn.

Yu tink se dɛn kin lamin di fim pan simen bod?

Yes, sכbjεkt to tεst כf sכfayz alkalinity, mכsichכ, adhesive kompitibiliti εn lכng tεm bond strכng.

Us adeziv dɛn fɔ yuz?

Di adeziv fɔ pik akɔdin to di PVC fɔmyulashɔn, bod sɔfays, lamineshɔn prɔses, kɔring sistɛm ɛn di humiditi rɛsistɛns we dɛn nid.

Yu tink se dɛn kin mek di fim hot laminated?

Yɛs. Yu kin yuz hot lamination afta dɛn dɔn validet di film, ink, adeziv, tɛmpracha, prɛshɔn ɛn layn spid.

Yu tink se dɛn kin kol laminate di fim?

Yu kin yuz wan kɔmpatibl kol-laminɛshɔn adeziv akɔdin to wetin i nid fɔ mɛn ɛn prodyuz.

Aw dɛn go mek yu nɔ gɛt wrinkles we dɛn de lamine?

Kontrol rol tɛnsiɔn, film alaynɛshɔn, bod flatnɛs, adeziv kɔtin, nip prɛshɔn, tɛmpracha ɛn layn spid.

Aw dɛn kin tɛst di PVC-to-gypsum bond trɛnk?

di bond strכng kin bi evaluate yuz wan grid peel כ adheshon tεst afta nכmal kכndishכn εn afta hεt כ humidity εkspכzכn.

Yu tink se PVC gypsum siling film nɔ de mek wata pas?

Di PVC fes de mek di frɔnt-sɔfays mɔstɔ rɛsistɛns bɛtɛ, bɔt di kɔmplit siling tayl nɔ de ɔtomɛtik watapruf. Di sabstret, edj, bak, adeziv ɛn instɔleshɔn fɔ evalyu bak.

Yu tink se di PVC fim nɔ de mek faya?

Dɛn nɔ fɔ tɔk bɔt am se i nɔ de mek faya atɔl. Flame pefɔmans fɔ sɔpɔt bay wan aplikebul tɛst ripɔt fɔ di ɛksaktɔl fim ɔ kɔmplit siling-bɔd kɔnstrɔkshɔn.

Yu tink se gred we nɔ de mek faya de?

Wan aplikeshɔn-spɛsifi k flaym-ritdant fɔmyulashɔn kin bi ɛvaluet akɔdin to di tɛst standad we dɛn nid, tiknɛs, kɔlɔ ɛn sabstret.

RoHS pruv se di fim na eco-friendly bildin matirial?

Nɔ, RoHS de mɔ bɔt tin dɛn we dɛn dɔn stɔp fɔ yuz na ilɛktrik ɛn ilɛktronik ikwipmɛnt. Di bildin projɛkt dɛn kin nid fɔ gɛt sɛpret VOC, REACH, flame, smok ɔ indoor-air dɔkyumentri.

ISO 9001 na prodak-pɔfɔmɛnshɔn sɛtifiket?

Nɔ, ISO 9001 gɛt fɔ du wit wan ɔganayzeshɔn in kwaliti-mɛnejmɛnt sistɛm ɛn i nɔ de tek ples fɔ di tɛst dɛn we dɛn kin du fɔ di prɔdak.

Yu kin klin di PVC siling surface?

Jɛnɛral wan dɛn kin was am wit sɔft klos ɛn mild klin afta dɛn dɔn kɔnfyus se i kɔmpitabl wit di kemikal. Abrasive pad ɛn agresiv sɔlvɛnt fɔ avɔyd.

Yu kin yuz PVC siling film na do?

Di standad prodakt na fɔ intɛriɔ siling aplikeshɔn dɛn. Fɔ mek yu de na do, yu nid fɔ gɛt gred we dɛn dɔn tɛst fɔ UV ɛn di wɛda.

Us winding dairekshɔn fɔ spɛsifa?

Kɔnfɛm if di fes we dɛn print fɔ wund insay ɔ ausayd bay di unwind dairekshɔn fɔ di lamination layn.

Wetin na di minimum ɔda kwantiti?

Di rεfrεns MOQ na aprכksimatli 2000kg. Di kɔlɔ dɛn we dɛn mek fɔ yusɛf, di silinda dɛn we dɛn kin print ɛn di pɔtn dɛn we dɛn kin yuz fɔ dɛnsɛf kin nid fɔ gɛt mɔ kwantiti.

Yu tink se pɔtn sɛmpul dɛn de?

Patɛn swatch dɛn we dɔn de ɛn smɔl trayal rol dɛn kin de fɔ apia ɛn lamination tɛst.

Wetin na di prodakshɔn lida tɛm?

Standart prodakshכn jεnarali nid fכ lεk 7-14 dez afta dεn kכnfכm di patεn, spεsifikεshכn, sεmpl, pak εn dipכsit.

Us infɔmeshɔn dɛn nid fɔ kot?

Gi di tik, waid, rol lɔng, kɔr, wayndin dairekshɔn, patɛn, sabstret, adeziv, lamineshɔn prɔses, tɛst dɛn we dɛn nid, kwantiti, pak ɛn ples fɔ go.

Get wan Kastom PVC Siling Film Kot

Bɔt HSQY Plastik Grup

HSQY Plastik Grup de saplae PVC jipsam siling film, ɛmbos PVC film, dɛkɔretiv PVC shit, printabl PVC film, PET shit, PP shit ɛn kɔstɔmayz plastic matirial to intanashɔnal B2B kɔstɔma dɛn.

HSQY de sɔpɔt gips-bɔd manifakta dɛn, siling-tayl faktri dɛn, lamination kɔmni dɛn, bildin-matirial impɔta ɛn distribyushɔn wit patɛn sɛmpul, spɛsifikɛshɔn divɛlɔpmɛnt, trayal prodakshɔn, kwaliti inspekshɔn ɛn ɛkspɔt pak.

Rikwest fɔ Kot ɛn Sampul