Poker Plein Kad PVC Sheet we de na di wɔl Wait Shit Wayt 0.2mm ,0.26mm ,0.27mm ,0.28mm,0.3mm,0.35mm Tik

Wait PVC Plɛy Kad Shit fɔ Poka Kad Manufakchurin

HSQY wayt PVC ple kad sheet matirial na wan sɔlid, opaque rigid plastic sabstret we dɛn kin gi to ple kad printa, kad kɔnvɔta ɛn gem manifakta dɛn. Na raw sheet matirial matirial pas fɔ bi dɛk we dɔn dɔn ɛn dɛn mek am fɔ print, kɔt, laminashɔn, day-kat, panch, kɔna rawnd ɛn chenj to poka kad, kasino kad, bod gem kad, tarot kad, ɛdyukeshɔn kad ɛn prɔmoshɔnal dɛk.

Standart tiknes inklud 0.20mm, 0.26mm, 0.27mm, 0.28mm, 0.30mm ɛn 0.35mm. Di sayz dɛn we de sheet matirial inklud 650 × 465mm, 670 × 470mm, 680 × 480mm ɛn 935 × 675mm, wit kɔstɔmayz dimɛnshɔn dɛn we de akɔdin to printin-prɛs fɔmat, impɔzishɔn layout ɛn kɔt ikwipmɛnt.

Di wayt safa we glos de gi klin bakgrɔn fɔ ditayla kad at wok, we di opasiti we dɛn kɔntrol de ɛp fɔ ridyus sho-thru bitwin di kad fes ɛn bak. Dɛn kin tɔk bɔt vajin-matirial ɛn sɔm risaykul-kɔntinɛnt fɔmyulashɔn dɛn we dɛn dɔn pik akɔdin to di wayt we dɛn nid, di say we dɛn klin, di kwaliti fɔ print, di kad fil ɛn di tin dɛn we dɛn nid fɔ du na di ɛnd-maket.

Wait PVC Plɛy Kad Shit Spɛsifikeshɔn dɛn

Wetin Na PVC Ple Kad Shit?

PVC ple kad sheet matirial na wan rigid plastic we nɔ gɛt fom sheet matirial we dɛn mek fɔ print kad ɛn kɔnvɔshɔn. Di wan dɛn we de mek di kad dɛn kin print di fes ɛn bak at wok, put ɛni varnish ɔ kɔtin we dɛn nid, laminate layers we nid de, dɔn dɛn kin day-kat ɛn rawnd di kad dɛn to di dimɛnshɔn dɛn we dɛn dɔn dɔn.

We yu kɔmpia am wit pepa kad stok, PVC nɔ de absɔb mɔstɔ izi wan ɛn i kin gi mɔ rɛsistɛns to tear, ed wear ɛn ripit hanlin. Di aktual savis layf fɔ wan finish dɛk de dipen bak pan ink, kɔtin, laminɛshɔn, sɔfayz frikshɔn, kɔt kwaliti, stɔrɔj ​​kɔndishɔn ɛn yuza handel.

Ki Rikwaymɛnt fɔ Kad-Grɛd PVC Sheet we de na di wɔl

Aw fɔ Pik PVC Sheet we de na di wɔl Tiknɛs fɔ Ple Kad

Nɔto jɔs fɔ pik tik frɔm di finish-kad gej we yu want. Di pɔsin we bay fɔ tink bak if di kad na singl-ply ɔ laminated, di wet fɔ ink ɛn varnish, di tik we di kɔt tik, di dimɛnshɔn fɔ di kad, di dip we dɛn de ɛmbos, di stiffness target, di ayt we di dɛk gɛt ɛn di shuffling fil we i want.

PVC Ple Kad Shit Imej dɛn

Finished PVC Plɛy Kad Sampul dɛn

Printin Methods fɔ Wayt PVC Kad Shit

Rigid PVC gɛt sɔfa we nɔ de absɔb, so di pefɔmɛns fɔ print dipen pan di sheet matirial sɔfa, ink kemistri, sɔfa ɛnaji, we fɔ mɛn ɛn prɛs sɛtin. Wan gred we de wok fayn wit UV ɔfset ink nɔ fɔ tek am ɔtomɛtik wan fɔ wok wit ɛvri inkjet, lɛsa ɔ tona printa.

Surface Energy, Ink Adheshon ɛn Kɔring

Gud print adheshon nid inof surface enaji en wan klin, uncontaminated sheet matirial . Di spɛsifikɛshɔn fɔ bay fɔ no di ink sistɛm, tritmɛnt rikwaymɛnt ɛn ɛni target dayn valyu. Di we aw dɛn de trit di say we di printa de kin chenj we dɛn de kip am, so di printa fɔ chɛk if i wet ɛn adheshon bifo dɛn mek am.

UV lamp, hot-eya drya ɛn ɔt laminatɔ kin rayz sheet matirial tɛmpracha. If yu wam pasmak, i kin mek yu kɔl, shrinkage, blok ɔ rɛjista muvmɛnt. Ink fɔ ful-ɔp fɔ wɛl bifo dɛn stak, kɔt, lamin ɔ pak sheet matirial s.

• Chek di enaji we de na di surface bifo yu print.

• Rɔn krɔs-hatch, tep ɔ ɔda ink-adheshon tɛst dɛn we dɛn gri pan.

• Konfam di kala density, dot gain ɛn fayn-layn riprodakshɔn.

• Verifay komplit UV curing bifo yu stak.

• Chek sheet matirial kɔl ɛn dimɛnshɔnal chenj afta yu dɔn mɛn.

• Test print kad afta yu bɛn, shuffle ɛn abrasion.

Single-Ply ɛn Laminated Plɛy Kad Strukchɔ dɛn

Lamineshɔn, Varnish ɛn Surface Finish

Laminɛshɔn kin mek di kad tik mɔ, ayd di layers we dɛn print ɛn i kin mek i te, bɔt if di tɛmpracha pasmak ɔ i nɔ ivin prɛshɔn i kin mek i kɔl, i kin shrinkage, i kin trɔp di briz ɔ di layt kin muv. Di lamineshɔn winda fɔ establish yuz di PVC gred we dɛn dɔn pik ɛn di aktual print sheet matirial s.

Wan klia varnish ɔ kɔtin kin protɛkt di grafik dɛn we dɛn print ɛn ajɔst di frikshɔn we di kad gɛt. Yu kin yuz glos, mat, linin-stayl, frɔst ɔ ɔda tin dɛn we yu kin tɔch we yu de dɔn di kad, bɔt di kɔtin fɔ kɔntinyu fɔ chenj ɛn i nɔ fɔ mek di kad dɛn we de nia de stik togɛda.

Kad Frikshɔn, Shuflin ɛn Anti-Blɔk Pɔfɔmɛnshɔn

Di kad dɛn we dɛn dɔn ple nid fɔ gɛt kɔntrol balans bitwin slip ɛn grip. Kad dɛn we gɛt frikshɔn pasmak kin at fɔ dil ɛn shuffle, bɔt kad dɛn we slip pasmak kin at fɔ kɔntrol. Sɔfayz frikshɔn de inflɔws bay PVC finish, ink, varnish, ɛmbos, aditiv, kɔring ɛn stɔrɔj ​​kɔndishɔn.

Blɔk ɔ stik kin bi bikɔs di ink nɔ kɔmplit, varnish we nɔ kɔmpitabl, di kɔt wet pasmak, slip aditiv dɛn we nɔ fayn, ay pak tɛmpracha ɔ kad dɛn we dɛn de stak bifo di sɔfa dɔn stebul. Wan finish-deck trial fɔ de insay di prodak aprɔval.

Day-Kɔt, Panch ɛn Kɔna Raund

PVC kad sheet matirial s kin day-kat, panch, slit ɛn kɔna-raun. Edj kwaliti dipen pan di bled shapnɛs, day kliarens, sheet matirial tik, stak ayt, tɛmpracha, kɔt spid ɛn di amɔnt fɔ kɔt ɔ laminated matirial.

• Kɔnfɛm di kad dimɛnshɔn ɛn kɔna rayus bifo yu prodyuz di kɔt day.

• Kɔntrol print blɔd ɛn rɛjista mak dɛn akɔdin to di impɔzishɔn layout.

• Yuz shap tul fɔ ridyus di wayt, bur ɛn rɔf ed.

• Chek kad skwea, dimɛnshɔnal tolɛreshɔn ɛn kɔna kɔnsistɛns.

• Inspek laminated kad fɔ ed separeshɔn afta dɛn dɔn kɔt.

• Test deck handling afta yu dɔn sɔt, pak ɛn stɔrɔj.

Aplikeshɔn fɔ PVC Ple Kad Shit dɛn

PVC Ple Kad vs Pepa Ple Kad

Virgin ɛn Risaykul-Kɔntinɛnt PVC Opshɔn dɛn

Virgin PVC jɔs de gi strɔng kɔntrol pan waytnɛs, opasiti, sɔfays klin, ɔda, kɔlɔ kɔnsistɛns ɛn printin apinans. I nɔmal fɔ lɛk usay prɛmiɔm vijual kwaliti ɛn stebul prɔsesin na di men prayorities.

Risaykul-kɔntinɛnt fɔmyulashɔn kin fayn fɔ sɔm prɔjɛkt dɛn we dɛn dɔn pik, bɔt di risaykul sɔs ɛn pasɛnt kin afɛkt shed, impyuriti lɛvɛl, ɔda, mɛkanikal prɔpati ɛn batch kɔnsistɛns. Wan risaykul-kɔntinɛnt target fɔ gri wit wan aprɔv apinans ɛn pefɔmɛns sampul bifo prodakshɔn.

Kwaliti-Kɔntrol Tɛst fɔ Ple Kad PVC Sheet we de na di wɔl

• Tik ɛn tik-tolɛreshɔn inspekshɔn.

• Shit saiz, skwea ɛn ed-kwaliti inspekshɔn.

• Waitnɛs, opasiti ɛn sho-thru ɛvalueshɔn.

• Surface klin ɛn visual-defect inspekshɔn.

• Shit flatnɛs, kɔl ɛn shrinkage tɛst.

• Surface-enaji ɛn ink-adhesion tɛst.

• Printin, curing ɛn lamination trayal dɛn.

• Day-kat, kɔna-raun ɛn ed inspekshɔn.

• Fleks, shuffling, abrashɔn ɛn blɔk tɛst.

• Finished-deck tiknes, wet ɛn handel ɛvalueshɔn.

Infɔmeshɔn we Yu nid fɔ gɛt Kot

Sɛtifiket ɛn Tɛst Dɔkyumɛnt dɛn

Di sɛtifiket ɛn ripɔt dɛn we de fɔ mach to di ɛksaktɔl PVC fɔmyulashɔn, risaykul-kɔntinɛnt lɛvɛl, kɔlɔ, tik ɛn prodakshɔn batch. Di wan dɛn we de bay fɔ no ɛni RoHS, REACH, hevi-mɛtal, phthalate, tɔy-sefty ɔ dɛstineshɔn-maket rikwaymɛnt bifo dɛn prodyuz.

Globɛl Ɛgzibishin dɛn

Prodakshɔn ɛn Pak

PVC kad sheet matirial s kin protɛkt wit PE film, kraft pepa, katon, kɔna bod, strap ɛn ɛkspɔt palet. Di spɛsifikɛshɔn dɛn fɔ pak fɔ mek dɔst nɔ skrach di sɔfays, di mɔstɔ nɔ de, di ed damej ɛn mek i nɔ muv pasmak sheet matirial we dɛn de ship am.

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt PVC Ple Kad Shit

Bɔt HSQY Plastik Grup