PET SHEET MANUFAKTƆR & SAPLAI
Kɔmpia APET, PETG, GAG, RPET ɛn PET/PE opshɔn dɛn insay rol ɔ kɔt-shit fɔmat—dɛn validet fɔm, optik, silin, sɔfayz tritmɛnt ɛn dɔkyumentri pan di gred we yu want.
DI KWƐK ANSA
PET shit na rigid ɔ sɛmi-rigid shit stok we dɛn mek frɔm di polyethylene terephthalate matirial famili. Klia PET de evalyu bɔku bɔku wan fɔ thermoformed trey, blista ɛn klamshɛl pak, fɔlding bɔks, print kɔmpɔnɛnt ɛn ɔda aplikeshɔn usay prodak visibiliti ɛn kɔnvɔyt pefɔmɛns impɔtant.
'PET sheet' nɔto kɔmplit spɛsifikɛshɔn fɔ bay. Rɛsin famili, layt strɔkchɔ, risaykul kɔntinyu, tik, waid, sɔfayz tritmɛnt, rol jɔyometri, fɔm kɔndishɔn ɛn kɔmplians rikwaymɛnt fɔ difayn fɔ di aplikeshɔn we dɔn dɔn.
MATERIAL FAMILI GAYD
Yuz dɛn tin ya as say fɔ bigin fɔ fɛn tin dɛn. Di aktual fɔmyulashɔn ɛn di tɛknikal data we dɛn de gi de ditɛm di pefɔmɛns.
Bɔku tɛm dɛn kin shɔtlist fɔ transparent thermoformed pakej we stiffness, klia ɛn rol-prosɛsin kɔnsistɛns na prayorities.
Kɔmɔn fɔ ɛvaluet fɔ fɔm, bɛnd, fɔl-bɔks ɛn displei aplikeshɔn dɛn we nid klia shit wit difrɛn prɔsesin profayl frɔm APET.
Wan kɔ-ɛkstrud kɔnstrɔkshɔn we dɛn jɔs diskrayb wit PETG skin ɛn wan APET kɔr, we dɛn kin tink bɔt fɔ klia fɔm ɛn kɔnvɔyt program dɛn.
Wan PET opshɔn fɔ prɔjek dɛn we gɛt difayn risaykul-kɔntinɛnt gol dɛn. Kɔntinɛnt, sɔs, traysabiliti ɛn ɛnd-yuz dɔkyumentri nid projɛkt-lɛvel kɔnfɔmeshɔn.
| Disishɔn pɔynt | APET | PETG | GAG | RPET |
|---|---|---|---|---|
| Tipik statin brif | Klia rigid thermoforming we de mek yu fil fayn | Fɔm, bɛnd ɔ fɔ fold | Layered klia kɔnstrɔkshɔn | Difayn risaykul-kɔntinɛnt target |
| Ki kɔnfɔmeshɔn | Fɔm winda & optiks | Proses kompitibiliti fɔ di wok | Layer strɔkchɔ & sɔfays | Di tin dɛn we de insay, sɔs & di we aw i tan |
| Baya fɔ saplae | Di ditel dɛn bɔt di mol ɛn di tin dɛn we dɛn pak | Kɔnvɔshɔn rod ɛn drɔin | Finished-yuz ɛn tɛst we fɔ du am | Polisi, makɛt ɛn dɔkyumɛnt list |
KƆRƐNT PRODƆKT SƆTLIST
Dɛn link ya de yuz di prɔdak dɛn we dɛn de sho naw na di HSQY sava. Kɔnfɛm di laytst gred, fɔmat we de ɛn di prɔjek dɔkyumentri we de na di kot.
Wan klia APET rol opshɔn fɔ fɔm trayal ɛn pak divɛlɔpmɛnt.
Luk di prɔdakWan klia PETG sheet fɔ prɔses kɔmpitibliti ɛn apiyans tɛst.
Luk di prɔdakFɔ prɔjek dɛn we bigin wit wan difayn kɔt-shit dimɛnshɔn.
Luk di prɔdakWan GAG kɔnstrɔkshɔn fɔ evaluate fɔ transparent blista ɛn fɔm program dɛn.
Luk di prɔdakWan laminated strɔkchɔ fɔ sil ɛn trey-sistim ɛvalueshɔn.
Luk di prɔdakWan klia rol-stɔk opshɔn; rikwest dɔkyumɛnt dɛn we dɛn nid fɔ di makit we dɛn want fɔ mek.
Luk di prɔdakWan rigid sheet opshɔn fɔ sɔfa-tritmɛnt ɛn skrach-tɛst rivyu.
Luk di prɔdakWan funkshɔnal sɔfa opshɔn fɔ tɛst ɔnda di aktual tɛmpracha ɛn humiditi saykl.
Luk di prɔdakAPPLIKƐSHƆN-BƐS SƆSIN
di sem nominal PET tiknes kin bihayv difrεnt we layt strכkchכ, surface tritmεnt, rol kכndishכn εn fכm jכmetri chenj.
Stet di kayn it, di filin ɛn stɔrɔj kɔndishɔn, fɔm dip, siling sistɛm ɛn di dɛstineshɔn-maket rikwaymɛnt.
Validate: fɔm, flɛnch, sial ɛn aplikebul it-kɔntakt dɔkyumɛnt dɛn.Sheb kaviti layout, dro ratio, prodak weit, kloz dizayn, optik target en pakej handlin kondishon.
Validate: distribyushɔn na di wɔl, klia, trim ɛn klos pefɔmɛns.Difayn print sistem, korona ɔ kɔtin nid, fold dairekshɔn, skor dizayn, bonding we ɛn finish apinans.
Validate: ink adheshon, fold waytin, bond ɛn sɔfays dɛfɛkt.Gi pat jɔyometri, hanlin ɛnvayrɔmɛnt ɛn ɛni anti-statik, kɔnduktiv ɔ klin-sɔfays rikwaymɛnt.
Validate: spɛsifikɛd ilɛktrik rɛnj, fɔm ɛn kɔntaminɛshɔn kɔntrol.KƆNVƐTA RISK CHƐK
Tiknes vεryushכn kin chenj hεt, dro εn finish-wכl distribushכn. Gri di we aw dɛn de mɛzhɔ ɛn aw fɔ bia wit am.
Wid, kɔr, ɔta dayamita, rol wet, wayndin ɛn ed kɔndishɔn fɔ mach di layn ɛn di ikwipmɛnt fɔ handle.
Difayn haz, klia, glos, kɔlɔ, jel, skrat, protɛktiv film ɛn us fes de gɛt tritmɛnt.
Fɔ fala di gred data shit ɛn validet fɔ ɔt, fɔm, trim, print, bon ɔ sial pan ripɔt matirial.
SPƐSIFIKƐSHƆN-FƆS RFQ
If dɛn nɔ pik di gred yet, gi di pak we dɔn dɔn, mashin ɛn akseptans tɛst. Wan tɛknikal rɛkɛmɔndeshɔn kin yus mɔ we di aplikeshɔn tɔk klia wan.
| RFQ fil | Infɔmeshɔn fɔ gi |
|---|---|
| End yus | Finish prodak, pak prodak ɛn savis/stɔrɔj kɔndishɔn |
| Tin dɛn | APET, PETG, GAG, RPET, PET/PE ɔ ɛp fɔ pik |
| Gej & di wit | Nominal tiknɛs, tolɛreshɔn, wɛb wit ɔ shit dimɛnshɔn |
| Rol kɔnfigyushɔn | Kor ID, ɔta dayamita, rol wet/lɛngth, wayndin ɛn edj rikwaymɛnt |
| Tɛmofɔmin we dɛn kin yuz fɔ mek tin dɛn | Mashin, mold, kaviti dip, drɔ ratio, trim ɛn target saykl |
| Optik & surface | Kɔlɔ, haz/klari target, glos, kɔtin, korona, mask ɔ tɛkstɔr |
| Di nid dɛn we pɔsin kin du fɔ wok | Anti-fog, anti-statik, silin layt, print ɔ bonding rikwaymɛnt |
| Obe | Destineshɔn makɛt, ɛnd-yuz standad ɛn ɛksaktɔ dɔkyumɛnt list |
| Biznɛs | Sampul kwantiti, ɔda volyum, pak, dɛstineshɔn pɔt ɛn target de |
SAMPUL-TO-ƆDA WƆKFLO
Kip di teknikol ɛn kɔmɛshɔnal beslayn kɔnɛkt tru ɛvri stej.
Send di aplikeshɔn, kɔnstrɔkshɔn, dimɛnshɔn, mashin ɛn di dɔkyumɛnt dɛn we dɛn nid.
Pik wan kandidet gred, rol fɔmat ɛn sampul plan fɔ di prɔses we yu want.
Fɔm, print, sial, fold ɔ asembl di sheet ɔnda ripɔt kɔndishɔn dɛn.
Rikɔd di gred we dɛn aksept, di tolɛreshɔn, di sɔfa, di we aw i luk, di pak ɛn di dɔkyumɛnt dɛn.
Kot ɛn prodyuz agens di rayt spɛsifikɛshɔn ɛn aprɔval rɛfrɛns we dɛn gri pan.
FAQ WE YU DE BAY
Dairekt ansa fɔ thermoformers, pak kɔnvɔta, brand tim ɛn distribyushɔn.
Aks bɔt yu PET sheet projɛktPET na di brayt polimכr famili. APET na amorphous PET we dɛn kin yuz fɔ klia rigid thermoforming; PETG na glycol-modified PET wit difrεnt fכm εn bεnd profayl; GAG na jɛnɛral wan PETG/APET/PETG layt sheet; RPET gɛt PET we dɛn dɔn risaykul. Di rayt fɔmyulashɔn ɛn di dɔkyumentri fɔ kɔnfɔm fɔ ɛni gred.
No universal bɛst gred nɔ de. Selekshɔn dipen pan di mold, drɔ dip, mashin, ɔt we, trim, finish rigiditi, optik, siling ɛn rigyuletɔri nid. Kɔmpia ripɔtmɛnt APET, PETG, GAG, RPET ɔ laminated sampul dɛn we yu de yuz di aktual prɔses.
Na wan gred nɔmɔ we dɛn sɔpɔt fɔ di aplikeshɔn fɔ it-kɔntakt we yu want ɛn di makɛt usay yu want fɔ go. Tɔk di kayn it, di tɛmpracha ɛn di kɔndishɔn fɔ kip am, dɔn aks fɔ di diklareshɔn ɔ tɛst dɔkyumɛnt dɛn we de fɔ di kɔnstrɔkshɔn we dɛn dɔn ɔda.
Spɛsifik tik ɛn tolɛreshɔn, wɛb wit, kɔr ID, maksimal ɔta dayamita, rol wet ɔ lɔng, wayndin dairekshɔn, edj kɔndishɔn, pak, mashin limit ɛn ɔndo we.
Difayn di target pefɔmɛns, di we aw dɛn de du di tɛst, di rɛnj we dɛn de mɛzhɔ, di kɔndishɔn dɛn we dɛn de ɛksplɔz, di tɛm we dɛn fɔ tek ɛn if dɛn nid fɔ gɛt tritmɛnt na wan ɔ ɔl tu di say dɛn. Apruv rizɔlt pan di aktual fɔm pat usay i pɔsibul.
Nɔ. Risaykul kɔntinyu ɛn risaykul na difrɛn kwɛstyɔn dɛn. Lay strɔkchɔ, aditiv, kɔtin, lɛbl, kɔlɔ ɛn lokal kɔlɛkshɔn/riprosɛsin sistɛm ɔl impɔtant. Kɔnfɛm risaykul pasɛnt ɛn di makɛt-spɛsifi k dizayn rikwaymɛnt dɛn sɛpret.
Wan sampul de alaw di kɔnvɔta fɔ chɛk layn fidin, ɔt, fɔm, wɔl distribyushɔn, optik, trim, printin, sial ɛn finish-pat bihayvya. Di apruv sampul ɛn rayt spɛsifikɛshɔn de mek wan shered akseptɛns beslayn.
STƆT WIT YU KƆNVƐSHƆN PROSƐS
Send yu finish-use ditel, matirial we yu lɛk, dimɛnshɔn, ikwipmɛnt limit, ɛni ia dimand ɛn di dɔkyumɛnt dɛn we yu nid.
