HSQY PET/PE Tɛmofɔmin Film fɔ Mit Pakɛj

PET/PE Tɛrmofɔmin Film fɔ Mit Pakɛj

HSQY PET/PE Tɛmofɔmin Film fɔ Mit Pakɛj na klia sɛmi-rigid laminated matirial we dɛn mek fɔ tɛmɔfɔm mit trey dɛn , fish ɛn sifud pak, chiz pak, kol-fud kɔntena ɛn fɔm-fil-sil aplikeshɔn.

Di matirial de kam togɛda wan APET ɔ PET strɔkchɔral layt wit wan polyethylene siling layt. Di PET layt de gi transparency, rigiditi, impak resistans ɛn thermoforming sɔpɔt, we di PE layt de gi ɔt-silin kapabiliti, fleksibiliti ɛn mɔstɔ rɛsistɛns.

di fכs prodakt dεn aydentify am as PET/PE Laminated Film -02 εn dεn de pכblish am naw insay wan tכtal tiknes rεnj we de arawnd 0.23–0.58 mm . wan rεfrεns kכnstrכkshכn de yuz wan aprכksimatli 50 μm PE siling layεr , we di komplit layεr strכkchכ fכ kכnfכm akɔdin to di tre disayn, fכm dip, siling film εn pak prכsεs.

PET/PE film kin saplae in klia rol fom wit kɔstɔmayz dimɛnshɔn ɛn 3-inch ɔ 6-inch kɔr. Weld-sil ɛn peelable gred dɛn kin pik akɔdin to di rikwayd kloz pefɔmɛns, kɔmpitabl lidding film ɛn pak ikwipmɛnt.

Prodakt Halayt: PET/PE Laminated Film | 0,23–0,58 mm | Na lɛk 100 ia so. 50 μm Rifrens PE Layer | Klia Rollstock we yu de du | 3-Inch ɔ 6-Inch Kɔr | Tɛmofɔmin we de mek | Fɔm-Fil-Sil | Mit & Sifud Pakɛj | Peelable ɔ Weld Sil | MOQ 1000 KG

Rikwest PET/PE Film Sampul ɛn Prayz

PET/PE Mit Pakɛj Film Vidio

PET/PE Fim Spɛsifikeshɔn dɛn

Di spesifikeshɔn dɛn we de kam biɛn ya de sɔma di prɔdak infɔmeshɔn we dɛn dɔn pablish naw. Faynal totɛl tiknes, PET layt, PE layt, wit, rol dayamita, rol wet, wayndin dairekshɔn, silin gred ɛn it-kɔntakt rikwaymɛnt fɔ kɔnfyus insay di aprɔv prodakshɔn spɛsifikɛshɔn.

Rikwest Kɔrɛnt PET/PE Tɛknikal Spɛsifikeshɔn dɛn

Aw PET/PE Tɛmofɔmin Film De Wok

PET ɔ APET Strukchɔral Lay

Di PET -based layt de gi di rigid fɔm bɔdi fɔ di pakej. I de kɔntribyut transparency, stiffness, mɛkanikal trɛnk ɛn dimɛnshɔnal stebiliti di tɛm we dɛn de thermoforming, filling, siling ɛn retail handling.

PE Siling Layer we de mek yu fil

Di PE layt de gi wan ɔt-sial sɔfays we kin bon to wan kɔmpitabl lidding film we dɛn de aplay kɔntrol ɔt, prɛshɔn ɛn dwɛl tɛm. Di PE layt de kɔntribyut bak fɔ fleksibiliti ɛn mɔstɔ rɛsistɛns.

Rifrɛns 50 μm PE Kɔnstrɔkshɔn

di infכmeshכn we dεn pכblish prodakt de rεfrεns wan aprכksimatli 50 μm PE layεr. Baya dɛn nɔ fɔ tek am se ɛvri PET/PE spɛsifikɛshɔn de yuz di sem layt rɛsɛshɔn. Di PET tiknes, PE tiknes ɛn totɛl laminat fɔ mach to tre dip, rigiditi, silin ɛn pak-pɔfɔmɛnshɔn rikwaymɛnt dɛn.

PET/PE Teknik Data Shit

Daunlod di PET data we de sheet matirial fɔ di fɔs matirial ɛvalueshɔn. Baya dɛn fɔ aks bak fɔ di kɔrɛnt PET/PE laminate spɛsifikɛshɔn we aplay to di tik we dɛn dɔn pik, PE layt, siling gred ɛn prodakshɔn batch.

PET Data Shit.pdf

Ki Ficha dɛm fɔ PET/PE Film fɔ Mit Pakɛj

Klia Prodakt Prɛzɛnteshɔn

Di PET layt de gi wan transparent pakej strɔkchɔ we de alaw kɔshɔma ɛn fudsavis ɔpreshɔn fɔ si mit, fish, chiz ɛn ɔda kol prodakt dɛn tru di fɔm tre .

Sɔpɔt we dɛn kin abop pan fɔ mek dɛn yuz Tɛmofɔm

di rigid PET layt de gi stebul fכm bכdi fכ trey dɛn εn pak kεviti dεm we di film tiknes, hita profayl, mold disayn εn fכm rεshכn kכrekt mεch.

PE Hɛt-Silin Sɔfays

Di PE surface de sɔpɔt ɔt silin to kɔmpitabl PE-based lidding films. Sil intɛgriti dipen pan di film strɔkchɔ dɛn, siling tɛmpracha, prɛshɔn, tɛm fɔ de, di flɛnch kɔndishɔn ɛn di ikwipmɛnt fɔ pak.

Weld-Seal ɔ Peelable Gred dɛn

Weld-sil strɔkchɔ dɛn kin pik we strɔng pɔrmanent kloz nid fɔ de, we dɛn kin ebul fɔ evaluate gred dɛn we dɛn kin pul we kɔntrol kɔshɔma opin impɔtant.

Mɔstɔ Resistɛns

Di PE layt de kɔntribyut mɔstɔ rɛsistɛns ɛn ɛp fɔ sɔpɔt chill-fud pak aplikeshɔn dɛn. Kwantiti WVTR fɔ kɔnfyus we mɔstɔ transmishɔn impɔtant fɔ shelf-layf pefɔmɛns.

Impekt ɛn Handling Pɔfɔmɛnshɔn

PET de gi yusful impak resistans ɛn dimɛnshɔnal stebiliti di tɛm we dɛn de thermoforming, prodakt filin, sial, transpɔt ɛn rital hanlin. Faynal tre pefomans fɔ validet afta dɛn dɔn fɔm.

PET/PE Film Aplikeshɔn dɛn

Fresh Mit Trey dɛn

PET/PE bottom web kin tεmכfכm insay klia trey dɛn fכ chill bif, pork εn כda mit prodak dεm usay rigiditi, prodak visibiliti εn hεt siling nid fכ.

Fɔ Pak Pɔltri

Di film kin evalyu fɔ pɔltri trey dɛn ɛn fɔm pak. Baya dɛn fɔ kɔnfɔm impak trɛnk, fɔm dip, sil intɛgriti ɛn likwid-mɛnejmɛnt rikwaymɛnt fɔ di aktual prodak.

Fish ɛn Sifud Pakɛj

PET/PE strכkchכ dεm kin yuz fכ fayn fish εn sifud pak usay klia prεzεntεshכn, fכm- tre rigiditi εn PE-kכmpatibl siling nid fכ.

Chiz ɛn Dairy Pakɛj

Dɛn kin ebul fɔ evaluate di matirial bak fɔ chiz, dairy ɛn deli pak usay dɛn nid fɔ mek thermoforming ɛn rili siling.

Fɔm-Fil-Sil Pakɛj

PET/PE rollstock kin yuz pan fayn thermoform-fil-seal layn usay di bottom web de hot ɛn fɔm, ful-ɔp wit prodak ɛn sial wit kompitibul ɔpa wɛb.

PET/PE Mit Pakɛj Aplikeshɔn Imej dɛn

Standart PET/PE vs. Ay-Baria PET/EVOH/PE

di laminate strכkchכ we dεn nid fכ pik akɔdin to di mit we dεn pak, di tכgεt shelf layf, gas envayroment, כksijεn sεnsitiviti εn stכrej kכndishכn. Standart PET/PE ɛn ay-baria PET/EVOH/PE de sav difrɛn pak rikwaymɛnt dɛn.

Fɔ fresh mit pak we nid modifyed-atmosfɛre kɔndishɔn ɔ difayn ɛkstend shelf layf, gi di target OTR, WVTR, gas miksɔp, stɔrɔj ​​tɛmpracha ɛn shelf-layf rikwaymɛnt so dat dɛn go ebul fɔ evaluate di aprɔpriet laminat.

Pilabl vs. Wɛld-Sil PET/PE Film

Sil we dɛn kin pul

Wan peelable PET/PE strɔkchɔ na fɔ gi sufayf pakej intagriti di tɛm we dɛn de stɔrɔj ​​ɛn distribyushɔn we i de alaw fɔ kɔntrol di opin bay di ɛnd yuza. Pil trɛnk fɔ validet wit di ɛksaktɔ lidding film ɛn tre flɛnch.

Weld Sil we dɛn kin yuz

Wan weld-sil gred na fɔ aplikeshɔn dɛn we nid fɔ gɛt strɔng pɔrmanent bon. Dɛn fɔ tɛst di sil intɛgriti bay we dɛn yuz di aktual pak mashin, mating film, di sil tɛmpracha, prɛshɔn ɛn di tɛm we i de de.

Fɔ Pik di Kɔrɛkt Gret

Tɛl HSQY if di paket nid izi fɔ opin, strɔng pɔrmanent sial, MAP , vaykum, kol stɔrɔj ​​ɔ ɔda spɛshal kɔndishɔn. Di bɔt wɛb ɛn di liding film fɔ evalyu as wan pak sistɛm.

Aw Dɛn De Yuz PET/PE Fim pan Tɛmofɔmin Layn

Film Hɛtin

Di PET/PE bɔt wɛb de ɔt to di fɔm winda we di PET gred we dɛn dɔn pik ɛn totɛl laminat tiknɛs nid.

Trey ɔ Kaviti Fɔmeshɔn

vεkyum, kכmprεs εya כ pכlכg εp de fכm di hεt wεb insay di tre kεviti we dεn nid. Dip drɔ dɛn nid fɔ tek tɛm kɔntrol di tik we di wɔl tik distribyushɔn.

Fɔ Filin Prodak

Dɛn kin put fresh mit, bɔd, fish, sifud, chiz ɔ ɔda prɔdak insay di kɔva we dɔn fɔm.

Vaykum ɔ Gas Flushing

We di dizayn fɔ pak di tin dɛn nid, dɛn kin pul di briz ɔ chenj am wit wan patikyula gas miksɔp bifo dɛn sial am. Di laminate barɛri pefɔmɛns fɔ mach to di intended pak sistɛm.

Hɛt Silin

Wan kompitibul lidding film de sial to di PE surface yuz kontrכl tεmprachכ, prεshכn εn dwεl tεm.

Fɔ Kɔt ɛn Separet

Dɛn kin trim di pak dɛn we dɛn dɔn sial ɛn separet dɛn akɔdin to di pak-layn kɔnfigyushɔn.

Aw fɔ Pik PET/PE Fim fɔ Pak Mit

Fɔd prodak: Tɔk bɔt bif, bɔd, bɔd, fish, sifud, chiz, deli prodak ɔ ɔda it we dɛn dɔn kol.

Total tiknes: Spɛsifik di laminate gej ɛn tolɛreshɔn we yu nid. dip trey dɛn εn hεvi prodakt kin nid difrεn stat tik.

PE layt: Kɔnfɔm di silin layt we yu nid instead fɔ abop pan di tɔtal tik nɔmɔ. di pכblish aprכksimatli 50 μm PE layεr na rεfrεns kכnstrכkshכn pas wan yunivεsal rikwaymεnt.

Rol wit: Gi di ekzak wɛb wit ɛn slitin tolɛreshɔn we di tɛmfɔmin layn nid.

Kor ɛn rol dimɛnshɔn: Spɛsifik 3-inch ɔ 6-inch kɔr, maksimal rol dayamita ɛn di rol wet we yu lɛk.

Winding dairekshɔn: Kɔnfɛm if di PE siling surface fɔ wund insay ɔ ausayd akɔdin to di pak mashin.

Trey dimɛnshɔn: Gi kaviti dip, flɛnch wit, drɔ ratio ɛn mold layout.

Sil tayp: Spɛsifik peelable ɔ weld sil ɛn gi di intended lidding-film strɔkchɔ.

Barɛri rikwaymɛnt: Gi target OTR ɛn WVTR if shelf layf dipen pan kwantifay barɛri pefɔmɛns.

Pakɛj atmosfɛs: Tɔk if di pak pak wit ɛya, vaykum-pak ɔ yuz modifyed-atmosfɛs pak.

Di kɔndishɔn fɔ kip di tin dɛn: Gi di tɛmpracha rɛnj we dɛn want, di shelf layf ɛn di kɔndishɔn fɔ distribyushɔn.

Destination market: Stet di kɔntri ɔ rijyɔn usay dɛn go sɛl di pakej we dɔn so dat dɛn go ebul fɔ rivyu di aplikeshɔn fɔ it-kɔntakt dɔkyumentri.

Send Yu Mit Pakɛj Film Rikwaymɛnt

Aw fɔ Test PET/PE Film Bifo Bɔlk Prodakshɔn

Tɛmofɔmin Trayal

Rɔn di matirial pan di prodakshɔn layn we yu want ɛn mold. Evaluate hita setin, kaviti difinishɔn, kɔna tiknes, flɛnch flatnɛs ɛn dimɛnshɔnal stebiliti.

Sil-Window Tɛst

Test di aktual lidding film akɔdin to wan fayn rɛnj ɔf siling tɛmpracha, prɛshɔn ɛn dwɛl tɛm fɔ establish wan stebul prɔsesin winda.

Sil Integriti Tɛst

Evaluate di sil trɛnk, chanɛl lik ɛn paket intɛgriti yuz di aktual it prodak ɛn prodakshɔn kɔndishɔn.

Barɛri Vɛrifikɛshɔn

We ɔksijɛn ɔ mɔstɔ transmishɔn afɛkt di prɔdak shelf layf, chɛk OTR ɛn WVTR fɔ di kɔmplit strɔkchɔ we yu dɔn pik ɔnda rilevɛns tɛmpracha ɛn humiditi kɔndishɔn.

Shelf-Layf Trial we dɛn kin yuz

Fɔ mit, sifud ɛn ɔda sɛnsitiv chilled it dɛm, validet di kɔmplit pakej wit di aktual prodak, lidding film, stɔrɔj ​​tɛmpracha, gas miksɔp usay i apɔynt ɛn intended shelf layf.

Transpɔt Tɛst

Evaluate di finish pak tru expekt stak, friji en transpot kondishon fo konfam tre rigiditi en sil integriti.

Fɔd-Kɔntakt ɛn Tɛknikal Dokumɛnt

Prɔfɛshɔnal bayer dɛn kin aks fɔ tɛknikal data we de, matirial spɛsifikɛshɔn, tɛst ripɔt ɛn it-kɔntakt dɔkyumentri fɔ di PET/PE gred we dɛn dɔn pik.

Dokumɛnt fɔ kɔrɛspɔnd to di aktual PET gred, PE siling layt, totɛl laminat tiknɛs, kɔlɔ, opshɔnal aditiv ɛn prodakshɔn spɛsifikɛshɔn we dɛn gi.

We kwantiti shelf-layf pefɔmɛns impɔtant, aks fɔ OTR, WVTR, silin ɛn ɔda rilevɛns tɛst data yuz tɛst kɔndishɔn dɛn we fit di aplikeshɔn we dɛn want fɔ pak.

Wholesale PET/PE Film we de mek tɛm fɔm

HSQY de saplae PET/PE thermoforming film to mit prosesɔ, fud-pak manifakta, thermoforming kɔnvɔta, tre manifakta, fɔm-fil-sil ɔpreshɔn, distribyushɔn ɛn pak impɔtɔ.

Minimum Ɔda Kwantiti

Di minim ɔda kwantiti we dɛn dɔn pablish naw fɔ dis prɔdak na 1000 kg . Kɔnstrɔkshɔn dɛn we dɛn kɔstɔmayz, spɛshal silin layers ɔ ɔda prɔjek-spɛsifi k rikwaymɛnt dɛn kin gɛt difrɛn prodakshɔn minim.

Sampul dɛn

Stok ɔ kɔt sɛmpul dɛn kin de fɔ di fɔs apinɛns ɛn fɔm ɛvalueshɔn. Limitɛd tɛst rol dɛn kin tɔk bɔt usay dɛn nid fɔ tray fɔ du mashin.

Spɛsifikeshɔn dɛn fɔ Rol we dɛn dɔn kɔstɔmayt

Rol wit, kor dayamita, rol wet, rol dayamita ɛn wayndin dairekshɔn kin kɔnfɔm akɔdin to thermoforming-mashin rikwaymɛnt ɛn prodakshɔn fisibiliti.

Intanɛshɔnal Bɔlk Sapɔt

Intanɛshɔnal bayer dɛn fɔ gi di tik, waid, rol spɛsifikɛshɔn dɛn we dɛn nid, siling gred, aplikeshɔn, kwantiti, di kɔntri we dɛn de go, di tɛm dɛn we dɛn fɔ ship ɛn di tin dɛn we dɛn nid fɔ du fɔ mek dɛn gɛt di rayt kot.

PET/PE Shit ɛn Rol Pak Ditiɛl dɛn

Sampul Pak: Infɔmeshɔn we dɛn dɔn pablish rɛfrɛns A4-sayz rigid PET sampul dɛn we dɛn protɛkt insay PP bag ɛn katon. Kɔnfɛm di sampul fɔmat we de naw bifo yu ship am.

Shit Pak: Infכmeshכn we dεn pכblish de rεfrεns lεk 30 kg pan wan bag fכ sכm sheet matirial spεsifikεshכn dεm. Aktual pak dipen pan tik, dimɛnshɔn ɛn di tin dɛn we di kɔstɔma nid.

Rol Pakin: Kɔnfɔm di rol wet, ɔdasay dayamita, 3-inch ɔ 6-inch kɔr, wayndin dairekshɔn, protɛktiv rap ɛn palet kɔnfigyushɔn bifo dɛn prodyuz.

Palet Pak: Infכmeshכn we dεn pכblish de rεfrεns lεk 500–2000 kg pan wan plai wud palet. Di wet we di palet gɛt naw fɔ kɔnfyus akɔdin to di rol dimɛnshɔn, shipmɛnt limit ɛn di say we dɛn nid fɔ go.

Container Loading: Di infɔmeshɔn we dɛn dɔn pablish de tɔk bɔt lɛk 20 tan fɔ sɔm shipmɛnt dɛn. Aktual kɔntena lod dipen pan rol dimɛnshɔn, palet kɔnfigyushɔn, kɔntena tayp, rod ɛn ligal wet limit.

Prodakshɔn Lid Taym: Infɔmeshɔn we dɛn dɔn pablish de rɛfrɛns lɛk 10–14 wok dez. Di lida tɛm naw dipen pan spɛsifikɛshɔn, sampul aprɔval, kwantiti ɛn prodakshɔn scheduling.

Dilivri Tɛm: Di opshɔn dɛn we dɛn dɔn pablish inklud EXW, FOB, CNF ɛn DDU. Kɔnfɛm di kɔmɛnt tɛm dɛn we dɛn nid wit di kot we de naw.

Rikwest Rol Pakin ɛn Kɔntinɛnt Lod Data

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt PET/PE Mit Pakɛj Fim

Wetin na PET/PE thermoforming film?

PET/PE tεmכfכmin film na laminated pak mεtirial we de kכmbayn wan PET -bεys rigid fכm layεr wit wan polyethylene siling layεr. I de yuz am as thermoformable bottom web fɔ it trey dɛn ɛn fɔm-fil-sil pak.

Wetin dɛn kin yuz PET/PE fim fɔ?

Tipik aplikeshɔn dɛn na mit trey dɛn , pɔltri pak, fish ɛn sifud pak, chiz pak, deli it, kol prodak ɛn ɔda tɛmfɔm ɔt-sial it pakej.

Wetin na di tik we dis PET/PE fim gɛt?

di kכrant fכm prodakt dεn de pכblish insay wan tכtal tik rεnj we de arawnd 0.23–0.58 mm. Konfam fainal gej ɛn tolɛreshɔn wit di prodakshɔn spɛsifikɛshɔn.

Aw tik di PE silin layt?

di pכblish rεfrεns kכnstrכkshכn de yuz wan aprכksimatli 50 μm PE layεr. Ɔda layt kɔnstrɔkshɔn dɛn fɔ kɔnfyus akɔdin to di siling, fɔm ɛn pak rikwaymɛnt dɛn.

PET/PE film fayn fɔ pak mit?

Yɛs. PET/PE thermoforming film kin yuz fכ fayn fresh εn kol mit trey dɛn usay transparency, rigidity εn PE-kompatibl hεt siling nid fכ.

Yu tink se dɛn kin yuz PET/PE fim fɔ fish ɛn sifud?

Yɛs. Dɛn kin evalyu di matirial fɔ fish ɛn sifud pak. Finished-pak tɛst fɔ kɔnfɔm fɔm kwaliti, sil intɛgriti, kol-chen pefɔmɛns ɛn ɛni barɛri lɛvɛl we dɛn nid.

Yu tink se PET/PE film kin thermoformed?

Yɛs. PET/PE laminated film na dizain fɔ thermoforming aplikeshɔn dɛn. Di kondishɔn fɔ ɔt, fɔm dip ɛn mashin sɛtin fɔ bi ɔptimayz fɔ di tiknɛs we yu dɔn pik ɛn di pakej jɔyometri.

Na PET/PE film ɔt sial?

Yɛs. Di PE layt de gi di ɔt-sial sɔfays. Sil pefɔmans dipen pan di mach lidding film, tɛmpracha, prɛshɔn, dwɛl tɛm ɛn prodakshɔn ikwipmɛnt.

Wetin na di difrɛns bitwin peelable ɛn weld-seal PET/PE ?

Dɛn mek di gred dɛn we dɛn kin pul fɔ mek dɛn ebul fɔ opin di ples we dɛn kin kɔntrol afta dɛn dɔn kip dɛn ɛn transpɔt dɛn. Weld-sil gred dɛn de fɔ wan strɔng pɔrmanent bon. Dɛn ɔl tu fɔ validet wit di ɛksaktɔl liding film.

PET/PE gɛt gud ɔksijɛn barɛri pefɔmɛns?

PET/PE kin gi yusful barεri pεrformεns fכ sεlekt chill-fud aplikεshכn dεm, bכt standad PET/PE nכ fכ trit כtomatכk lεk wan ultra-high כksijεn-baria strכkchכ. Rikwest di OTR data we dɛn mɛzhɔ we ɔksijɛn transmishɔn impɔtant.

Ustɛm dɛn fɔ yuz PET/EVOH/PE insted ɔf PET/PE ?

PET/EVOH/PE ɔ ɔda ay-baria strɔkchɔ fɔ evaluate we di pak nid sɔbstanshal lɔwa ɔksijɛn transmishɔn, difayn MAP pefɔmɛns ɔ wan ɛkstend shelf-layf target we standad PET/PE nɔ kin mit.

Yu tink se dɛn kin yuz PET/PE fim fɔ modifyed-atmosfɛs pak?

Di kɔmplit pak strɔkchɔ fɔ evalyu agens di gas miksɔp we dɛn nid ɛn di target OTR. Sɔm MAP aplikeshɔn dɛn kin nid fɔ gɛt ay-baria multilayer strɔkchɔ pas standad PET/PE .

Us kɔr saiz dɛn de?

Di PET/PE film spɛsifikɛshɔn we dɛn dɔn pablish inklud 3-inch ɛn 6-inch rol kɔr. Konfam di kor we yu nid, maksimal rol dayamita en rol weit fo di thermoforming lain.

Yu tink se dɛn kin kɔstɔmayt di rol wit?

Yɛs. Di prodakt de pablish wit kɔstɔmayz saiz. Gi di wɛb wit ɛn tolɛreshɔn we dɛn nid akɔdin to di mashin we dɛn de pak ɛn di we aw dɛn mek di mold.

Wetin na di minimum ɔda kwantiti?

Di minim ɔda kwantiti we dɛn dɔn pablish naw fɔ dis prɔdak na 1000 kg. Stɔkchɔ dɛn we dɛn kɔstɔmayt ɔ spɛshal spɛsifikɛshɔn dɛn kin gɛt difrɛn prodakshɔn minim.

A kin gɛt sampul bifo a ɔda?

Yɛs. Dɛn kin tɔk bɔt di sampul dɛn we de fɔ di fɔs kwaliti ɛn thermoforming evalueshɔn. Di wan dɛn we de bay we nid fɔ tray fɔ yuz mashin fɔ aks if wan fayn tɛst rol de.

Wetin a fɔ tɛst bifo a gri fɔ PET/PE fim?

Evaluate thermoforming, wall-thickness distribution, flange flatness, sial winda, peel ɔ weld strɛngth, pakej intɛgriti, barɛri pefɔmɛns usay dɛn nid ɛn stɔrɔj ​​pefɔmɛns yuz di aktual it ɛn prodakshɔn layn.

Us dɔkyumɛnt di wan dɛn we de bay kin aks fɔ?

Prɔfɛshɔnal bayer dɛn kin aks fɔ di tɛknikal spɛsifikɛshɔn dɛn we de, tɛst ripɔt ɛn fud-kɔntakt dɔkyumentri we aplay to di PET/PE kɔnstrɔkshɔn ɛn dɛstineshɔn makɛt we dɛn dɔn pik.

Us infɔmeshɔn a fɔ gi fɔ kot?

Gi totɛl tiknɛs, PE-layer rikwaymɛnt, wɛb wit, kɔr saiz, maksimal rol dayamita, rol wet, wayndin dairekshɔn, pil ɔ wɛld rikwaymɛnt, it aplikeshɔn, pak atmosfɛs, target barɛri pefɔmɛns, ɔda kwantiti ɛn dɛstineshɔn.

Bɔt HSQY Plastik Grup

HSQY Plastic Group de saplae plastic sheet matirial , rolstɔk ɛn it-pak matirial to kɔmɛshɔnal kɔstɔma dɛn. I prodakt rεnj inklud PET sheet matirial , PET/PE laminated film, PET/EVOH/PE ay-baria strכkchכ, tεmכfכm PET trey dɛn εn kompatibl tre -siling film.

HSQY de sɔpɔt mit prɔsesɔ, fud-pak kɔnvɔta, tɛmfɔmin kɔmni, tre manifakta, distribyushɔn ɛn impɔta wit matirial sɛlɛkshɔn, sɛmpul, kɔstɔmayz rol spɛsifikɛshɔn, fud-kɔntakt dɔkyumentri ɛn intanashɔnal bɔlk saplai.

Kwaliti ɛn Prodak Dokumɛnt

HSQY na Intanɛshɔnal Indastri Ɛgzibishin dɛn

Rikwest fɔ kot di prayz fɔ PET/PE Mit Pakɛj Fim

Yu de luk fɔ PET/PE thermoforming film fɔ mit, bɔd, sifud, chiz ɔ chill-fud pak? Send HSQY yu tiknes we yu nid, rol wit, kor saiz, fom dip, siling gred, lidding film, baria rikwaymɛnt, kwantiti ɛn dɛstineshɔn makɛt.

Kontakt HSQY fɔ Sampul ɛn Bɔlk Prayz