Lanpan min bɛ a yɛrɛ nɔrɔ PVC sɛbɛn gɛlɛn

Yɛrɛ-nɛgɛ PVC Lanpan-sɛbɛn ye mun ye?

A yɛrɛ nɔrɔlen PVC lanpanbɔlan ye kɔkannafɛn ye min bɛ kɛ a tilancɛ gɛlɛn walima a gɛlɛn ye PVC ni nɔrɔlan ye min bɛ se ka degun ani min bɛ se ka bɔ. A bɛ kɛ ka fini, papiye, papiye masirilenw ani datugulan wɛrɛw lamini walasa ka lanpan gɛlɛnw dilan.

Nɔrɔlan bɛ a to finimugu masirilen bɛ se ka kɛ PVC kɔkanna na k’a sɔrɔ a ma kola ɲiginnen datugu danfara la. O bɛ se ka lanpan dilanni nɔgɔya, ka dɔ bɔ nɔrɔli labɛnni na ani ka dɛmɛ don lamini na min bɛ kɛ cogo basigilen na bololabaara la, atelier ani izini dilanni na.

HSQY bɛ lanpan PVC sɛbɛnw dilan minnu bɛ u yɛrɛ nɔrɔ ɲɔgɔn na, u janya bɛ bɔ milimɛtɛrɛ 0,3 na ka se milimɛtɛrɛ 0,5 ma. Bonya minnu bɛ sɔrɔ, olu bɛ milimɛtɛrɛ 1300 fo milimɛtɛrɛ 1500 ɲɔgɔn bɔ, ka fara sɛbɛnw kan minnu bɛ kɛ ka kɛɲɛ ni sariya ye, ni hakɛw ye minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, ni sɛbɛnfura ye ani panɛri tigɛlenw ka kɛɲɛ ni fɛn sugandilenw ye.

Kulɛri finmanw, jɛlenw, tilayɔrɔba jɛlenw ani minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ sɔrɔ ni u ɲɛw ye minnu bɛ manamana walima ni u ɲɛw ye ɲɛgɛn ye. Fɛn bɛ se ka sugandi ka kɛɲɛ ni a gɛlɛya wajibiyalen ye, yeelen bɔli, kɔnɔna cogoya, datugulan ani lanpan hakɛ dafalenw.

Lanpan laban lajɛ ka kan ka kɔrɔbɔ ni PVC hakɛ yɛrɛ ye, nɔrɔcogo, fini walima papiye datugulan, lanpan dacogo, anpulu suguya, anpulu janya ani baarakɛcogo funteni. Fɛn ɲɛfɔli dɔrɔn tɛ yeelenbɔlanw lakanani sariya dafalen dɔ labatoli sigi sen kan.

Lampshade ɲini PVC Sɔngɔko    Aw ye Materiel Samples ɲini

Yɛrɛ-nɔgɔlen PVC Lanpan-sɛbɛn Jaw

Yɛrɛ-nɔgɔ PVC Lanpan-yɔrɔ-sɛbɛn ɲɛciw

A laban muɲuni muɲuni, a bonya muɲuni, yeelen tali, opacity, nɔrɔlen coat girinya, a ɲɛkisɛ fanga, liner suguya ani a baarakɛcogo ka kan ka dafa ni misali ye min dabɔra ani ni fɛn dilannenw ɲɛfɔli sɛbɛnnen ye.

Lampshade Backing min bɛ a yɛrɛ nɔrɔ a yɛrɛ la, o jɔcogo

Nafa jɔnjɔn minnu bɛ sɔrɔ yɛrɛlajɛ la PVC Lampshade Sheet

Peel-and-Stick lanpanw dilanni

Nɛgɛdaga min bɛ se ka degun, o b’a to fini walima fini masirilen papiye bɛ se ka lamini k’a sɔrɔ u ma kola jilama jɛnsɛn u dan na. O bɛ se ka dɔ bɔ labɛn waati la, ka dɔ bɔ nɔrɔli la ani ka kɛnɛya waati dɔgɔya.

Dɛmɛ min bɛ kɛ ni jɔli ye tuma bɛɛ

PVC tabaga gɛlɛn bɛ lanpan dafalen dɛmɛ a ka silinda, koni, oval walima custom profile mara a nɔrɔlen kɔfɛ lanpan bololanɛgɛw ni a karamɔgɔya la.

Yeelen jɛnsɛnni min bɛ kɔrɔsi

PVC finman ni tilayɔrɔba jɛlen bɛ se ka yeelen cilenw jɛnsɛn ani ka dɛmɛ don ka anpulu yecogo tilennen dɔgɔya. Yeelen nɔ min bɛ sɔrɔ o la, o bɛ bɔ a bonya, a tɛ ye, a kɔnɔna kulɛri ani a kɛnɛma datugulan.

Kɔnɔna Yecogo saniya

Kɔnɔna fini jɛman, translucent, matte ani decorative bɛ se ka yecogo suguya wɛrɛw dilan ni lanpan bɛ mana walima ni a fagara.

Tigɛ nɔgɔya ani Die-Cutting

A janya bɛnnenw bɛ se ka kɛ muru tigɛlen ye, die tigɛlen ye, sɔgɔlen ye walima CNC tigɛlen ye ka kɛ lanpanw ye minnu bɛ kɛ kɛrɛkili ye, minnu ka surun, minnu kurulen don ani minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

Custom Thickness ani Bonya

Fɛnɲɛnɛma janya ni a bonya bɛ se ka sugandi ka kɛɲɛ ni a bonya hakɛ wajibiyalen ye, panɛri janya, a gɛlɛya, a tigɛcogo ani a dilanni minɛnw.

Sugandili minnu bɛ se ka sɛbɛn ani minnu bɛ se ka masiri

Yɔrɔ sugandilenw bɛ se ka sɛbɛnni dɛmɛ, ka finiw masiri, ka nɛgɛdaga kɛ walima ka kulɛriw kɛ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye. Enki ni finimugu bɛnkan ka kan ka sɛgɛsɛgɛ PVC hakɛ tigitigi kan.

Baarakɛminɛnw (Formulations fonctionnelles).

Fura minnu bɛ kɛ ka banakisɛfagalanw kɛlɛ, minnu bɛ UV sabati, minnu bɛ jɛman kɛlɛ ani minnu bɛ tasuma bɔ, olu bɛ se ka baro kɛ ni sɛgɛsɛgɛli wajibiyalen ɲɛfɔlen dɔ dira. O jogo ninnu man kan ka jate fɛn dilannen bɛɛ la min bɛ kɛ ka kɛɲɛ ni sariya ye.

0,3 mm, 0,4 mm walima 0,5 mm Lampshade sugandicogo PVC

Janya sugandili fana ka kan ka jateminɛ kɛ biɲɛ cɛmancɛ, panɛri janya, karamɔgɔya dilanni, datugulan girinya, sɔgɔli jɔcogo ani yeelen jiginni wajibiyalen. Sɛgɛsɛgɛli ka kan ka lajɛ lanpan yɛrɛ kɔnɔ sani a ka kɛ caman ye.

Lampshade Backing finman, Translucent ani Transparent

Fɛn minnu bɛ kɛ ka lanpan min bɛ a yɛrɛ nɔrɔ a yɛrɛ la PVC

Fini, papier walima finimugu papiye bɛɛ ka kan ka kɔrɔbɔ ni nɔrɔ sugandilen ye barisa finimugu, finimugu, plastiki, ji ani a sanfɛla cogoya bɛ se ka jɛɲɔgɔnya fanga Changer.

Fini bɛ kɛ cogo min na lanpan min bɛ a yɛrɛ nɔrɔ a yɛrɛ la PVC

1. Aw bɛ fɛnw cogoya labɛn

Aw bɛ a to PVC kɔkanna, datugulan ani nɛgɛdaga ka se atelier funteni sabatilen ma sani a ka lamini. Fɛn nɛnɛmanw bɛ se ka dɔ bɔ fɔlɔ tack la ani ka dɔ fara curling kan.

2. Aw bɛ Baarakɛyɔrɔ saniya

Aw bɛ baara kɛ ni baarakɛminɛn saniyalen ye, min jalen don ani min bɛ kɛ fla ye. Bugun, fiɲɛw ani nɔgɔ minnu sirilen bɛ datugulan jukɔrɔ, olu bɛ se ka kɛ sababu ye ka bɔgɔdaga yetaw kɛ lanpan dafalen kɔnɔ.

3. Aw bɛ datugulan tigɛ

Aw bɛ fini walima papiye tigɛ ka bonya dɔɔni ka tɛmɛ PVC panɛli laban kan ni a dilanni fɛɛrɛ bɛ a ɲini ka tigɛ lamini kɔfɛ.

4. Aw bɛ Release Liner bɔ dɔɔni dɔɔni

Aw bɛ finimugu yɔrɔ fitinin dɔ bɔ kɔfɛ, ka datugulan labɛn ka sɔrɔ ka finimugu bɔ dɔɔni dɔɔni ka sɔrɔ ka datugulan kɛ ka bɔ fan kelen fɛ.

5. Aw bɛ Degun kelen kɛ

Aw bɛ baara kɛ ni wuluwulu, sɔgɔsɔgɔninjɛ walima laminiminɛn bɛnnen ye walasa ka hali degun kɛ ani ka dɔ bɔ bugunw, kurukuruw ani nɔrɔli dafabaliw la.

6. Aw bɛ a to nɔrɔlenw ka sigi waati

Tack fɔlɔ ni bond laban fanga bɛ se ka kɛ danfara ye. Aw bɛ waati bɛrɛ to a ka sigi sani aw ka wuli ni fanga ye, ka a dawolo fini walima ka a jogoɲini laban kɛ.

Panneau de lanpan tigɛcogo ani a dilanni

Muru Tigɛcogo

Lanpan finman PVC bɛ se ka tigɛ ni nafama muru nɔgɔlen ye, ni tigɛlan wulilen ye walima ni tigɛtabali bɛnnen ye. Blade cogoya bɛ nɔ bila dawolo jogo la ani tigɛcogo ɲuman na.

Die-Cutting (Sa-Tigɛ-tigɛ).

Die-cutting bɛ se ka dɛmɛ don ka segin-ka-bɔnye kɛ ka panɛri rectangulaire, tapered ani shaped dilan. Die clearance ni tigɛ tansiyɔn ka kan ka bɛn PVC janya ni lamini datugulan ma.

Slitting (sɔgɔli) kɛli

Master rolls minnu bɛ to senna, olu bɛ se ka tigɛ ka kɛ u bonya fitininw ye walasa u ka bɛn lanpan janya hakɛ dantigɛlenw ma, ka dɔ bɔ sɛnɛfɛnw tiɲɛni na ani ka fɛnw marali nɔgɔya.

Seam ani Edge Finishing (Dɔgɔtɔrɔso ni Dawolo Finishing).

Segin bɛ se ka ban ni overlap construction ye, seam tape walima fɛɛrɛ wɛrɛ min sɛgɛsɛgɛra. Dawolo kurulenw, sirilan ani bololanɛgɛ sirili ka kan ka sɛgɛsɛgɛ walasa u fanga ni u ɲɛda cogoya tɛ.

Sɛbɛnni kɛli

Écran, UV walima sɛbɛnni fɛɛrɛ wɛrɛw bɛ se ka kɛ yɔrɔ sugandilenw kan. Enki nɔrɔli, a kɛnɛyali funteni, a kulɛri ani a yeelen bɔli ka kan ka jateminɛ sani a ka kɛ jamaba ye.

Yɛrɛ-nɔgɔlan PVC Lampshade Sheet (Lampshade Sheet) kɛcogo

Tabali Lampe Ombres

Yɛrɛ nɔrɔlen PVC kɔkanna bɛ kɛ dunun, mansamara, tabali lanpan nɛrɛmuguma ani ladamulenw na minnu datugulen don ni fini ye, ni papiye ye walima ni papiye masirilen ye.

Ombres de lampe de sol

Kɔfɛla belebelebaw bɛ se ka gɛlɛya wɛrɛ di lanpan janyalenw ma ani duguma lanpan cɛmancɛbaw ma.

Ombres de Lampe Pendant

PVC panɛri minnu tigɛra ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka kɛ sigiyɔrɔw, lotɛli, dumunikɛyɔrɔ ani jagokɛyɔrɔw yeelenbɔlanw ye.

Lotɛli ni jatigila yeelen

Kulɛriw, finiw, hakɛw ani kɔnɔna finiw minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka lotɛli so, dumunikɛyɔrɔw, jatigila yɔrɔw ani jatigila porozɛw masirilenw dɛmɛ.

Fiyeere ni Ɲɛjirali yeelen

Datugulan minnu sɛbɛnnen don walima minnu tɔgɔ sɛbɛnnen don, olu bɛ se ka lamini ka kɛ PVC kɔkanna ye butikiw jiracogo, jirali, waati dɔɔnin sigili ani laseli yeelenw kama.

OEM ani Privé-Label lanpanw

Yeelen dilannikɛlaw bɛ se ka u bonya, u bonya, u ɲɛ tɛ ye, u kulɛri, u nɔrɔlen, u kɔnɔna ani u ka pakew labɛn ka kɛɲɛ ni u yɛrɛ sago ye walasa ka OEM bɔli kɛ siɲɛ caman.

PVC ni Styrene, PET ani P. P. Lampshade Backing

Funteni, tasuma ani kuran lakanani jateminɛw

PVC fɛn, nɔrɔ min bɛ degun, bɔli fini, kɛnɛma fini, seam tape ani lanpan yɔrɔ dafalen wɛrɛw bɛ se ka kɛ ni funteni ni tasuma kɛcogo tɛ kelen ye. Fɔli min kɛra PVC layɛrɛ kan, o man kan ka kɛ a yɛrɛma lanpan lamininen dafalen kan.

Tasuma-fagalan, tasuma-fagalan walima a yɛrɛ fagali-fɛrɛw ka kan ka kɛ dɔrɔn ni u dɛmɛna ni sɛgɛsɛgɛli fɛɛrɛ ye min ɲɛfɔlen don ka jɛya, ni fɛnw janya, misali jɔcogo ani sisan sɛgɛsɛgɛli rapɔɔri.

Nɛgɛ bɛ se ka nɔgɔya, ka wuli, ka a kulɛri Changer walima ka fanga dɔgɔya ni funteni kɔrɔtalen don hali ni PVC tabaga tora a hakɛ la. Nɔrɔlenw ka funteni kunbɛncogo ka kan ka jateminɛ u danma.

Standard PVC bɛ ni kuran-sɔrɔ-cogo ye, nka nin lanpan-sɛbɛn in man kan ka ɲɛfɔ iko kuran-sɔrɔ-yɔrɔ min sɛgɛsɛgɛra fo n’a sɛgɛsɛgɛra ka kɛɲɛ ni kuran-sɔrɔ-cogo ye min bɛ sirataama.

Yeelenfɛn dilannen ka kan ka jateminɛ anpulu suguya la, watti, LED bolibaga funteni, fiɲɛbɔ, biɲɛ cɛmancɛ, anpulu bɔli ani a siricogo sariyaw minnu bɛ sirataama a taayɔrɔ sugu la.

Sɛgɛsɛgɛli minnu bɛ kɛ ni misali ni jogoɲini ye minnu bɛ ladilikan di

• PVC a bonya, a bonya ani a hakɛ muɲuli.

• Kulɛri finman, kɛnɛya, opacity ani yeelen jɛnsɛnni.

• Kɔnɔna yecogo min bɛ kɛ ni matiri ye, satin walima min bɛ manamana.

• Fɛnɲɛnɛmaw gɛlɛyali ani a kɛnɛyali a wulilen kɔfɛ.

• Adhesive coat uniformity ani coating defects yelenw.

• Fɔlɔ tack, peel fanga ani shear-holding baarakɛcogo.

• Fini, papier ani decoration-paper bɛnkan.

• Bubble, wrinkle ani edge-lifting kɛcogo lamini kɔfɛ.

• Release-liner bɔli ani grid tiɲɛni yɔrɔ minnu na a bɛ se ka kɛ.

• Muru tigɛcogo, sa-tigɛcogo ani tigɛcogo ɲuman.

• Seam fanga ani ring-attachment baarakɛcogo.

• Funteni kɔrɔya, kɔrɔya yeelen, jɛman ani nɔrɔli creep.

• Tasuma, RoHS walima sariyaw sɛgɛsɛgɛli wɛrɛw wajibiyalen don.

Lanpan min bɛ a yɛrɛ nɔrɔ a yɛrɛ la PVC Sugandili

• A janya bɛ daminɛ milimɛtɛrɛ 0,3 ɲɔgɔn na ka se milimɛtɛrɛ 0,5 ma.

• A bonya bɛ daminɛ milimɛtɛrɛ 1300 ɲɔgɔn na ka se milimɛtɛrɛ 1500 ma.

• Standard sheets, jumbo rolls, slit rolls ani panneaux tigɛlenw.

• Kulɛri finman, translucent, transparent ani customized.

• Kɔnɔna yɔrɔw minnu bɛ manamana, satin, matte ani decorative.

• Opacity ani light-transmission hakɛ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Nɛgɛ min bɛ se ka degun, o sugandilen don datugulan laɲininen kama.

• Adhesive coat girinya ni peel-strength laɲini min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Aw bɛ papiye, liner girinya ani sumanikɛlan sɛbɛnnen bɔ.

• Fura minnu bɛ banakisɛfagalanw kɛlɛ, minnu bɛ UV sabati ani minnu bɛ jɛman kɛlɛ.

• Tasuma-baarakɛcogo furakɛli min sinsinnen bɛ sɛgɛsɛgɛli wajibiyalen ɲɛfɔlen kan.

• Kartɔnw, labeliw, roll cores ani palɛtiw minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

Kunnafoni minnu ka kan ka kɛ lanpan dɔ la PVC Quotation

• A wajibiyalen don PVC janya.

• Sɛbɛn hakɛ, rollo bonya, rollo janya walima tigɛ-panɛli hakɛw.

• Finished lampshade diameter ani panneau janya.

• Kulɛri fin, translucent, transparent walima customized.

• Opacity wajibiyalen, yeelen bɔli ani kɔnɔna cogoya.

• Fini, papier peint, papier walima datugulan wɛrɛw.

• Nɛgɛ suguya wajibiyalen, a ɲɛkisɛ fanga ani a funteni baarakɛcogo.

• Release-liner ani printed-grid wajibiyalenw.

• Tigɛ, tigɛli, die-tigɛ walima sɛbɛnni kɛcogo.

• Tasuma, RoHS, UV, antistatique walima antistatique walima jɛman kɛlɛli wajibiyalenw.

• Misali hakɛ, fɔlɔ fɔlɔ ani san ɲinini.

• Foroko, labelling, destination port ani delivery wajibiyalenw.

Aw ye aw ka lanpan ci PVC Laɲiniw

Packing ani Delivery

Sɛbɛnw foroko : Sɛbɛnw bɛ se ka lakana ni bɔlan ye, PE bɔrɔw, kraft papiyew, kartɔnw, nkɔni kɔlɔsibagaw ani jiri palɛtiw.

Kurukuruw foroko : Kurukuruw bɛ se ka pake kɔnɔbara bɛnnenw kan ni lakanani filimu ye, laban lakanani, kartɔnw walima palletized export packaging.

Labɛn minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye: Fɛn dilannenw kode, u bonya, u kulu kunnafoniw, kiliyanw ka logow, barɔdiw ani cikan taamasiyɛnw bɛ se ka fara u foroko kan.

Jagokɛlaw ka doni caman cili: A ka c’a la, jagokɛlaw ka komandiw bɛ ci kɔgɔji kɔnɔ doni fɛ. Fiɲɛ walima cidenw bɛ se ka kɛ ka misaliw ni hakɛ danmadɔw kɛ.

A dilanni waati danma: Baarakɛ tile 15-20 ɲɔgɔn misali, a ɲɛfɔcogo, a foroko dilanni ani a sarali dafalen kɔfɛ.

Seereyaw ni Sɛbɛnw

Sɛbɛn minnu bɛ sɔrɔ, olu bɛ se ka kɛ sɛgɛsɛgɛli rapɔɔriw ye minnu ɲɛsinnen bɛ RoHS ma ani ISO 9001 walima ISO 14001 ɲɛnabɔli-sitɛmu sɛbɛnw. Sannikɛlaw ka kan k’a jira ko sɛbɛn minnu bɛ tali kɛ PVC , nɔrɔlen ani fɛn dilannenw ɲɛfɔli tigitigi la.

ISO 9001 ani ISO 14001 bɛ ɲɛnabɔli siraw ɲɛfɔ, wa u man kan ka jira i n’a fɔ dalilu min b’a jira ko lanpan dafalen bɛ yeelen, kuran walima tasuma sariya kɛrɛnkɛrɛnnen dɔ labato.

Duniya bɛɛ ka jirali ani kiliyanw dɛmɛni

HSQY Plastic Group bɛ plastiki-sɛbɛnw ni fɛnw ɲɛnabɔcogo jira diɲɛ kɔnɔ ɲɛjiraliw la. Misaliw, fɛnw ɲɛfɔcogo ani porozɛw wajibiyalenw bɛ se ka baro kɛ ni yeelen dilannikɛlaw ye, lanpan dilanni iziniw, feerekɛlaw ani OEM sannikɛlaw.

Mun na i bɛ HSQY sugandi ka kɛ i ka lanpan PVC feerela ye?

• Yɛrɛ nɔrɔlen PVC kɔkanna min dabɔra lanpan dilanni kama.

• A janya ka ca ni milimɛtɛrɛ 0,3 ye ka se milimɛtɛrɛ 0,5 ma.

• A bonya bɛ Kɛ ka Bɔ milimɛtɛrɛ 1300 ɲɔgɔn na ka Se milimɛtɛrɛ 1500 ma.

• Kulɛri finman, jɛlen, tilayɔrɔba jɛlen ani ladamu.

• Matte, satin, glossy ani kɔnɔna finiw bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Sheet, roll, slit-roll ani cut-panel sɔrɔli cogoyaw.

• Adhesive ni release-liner cogoyaw minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Misaliw bɛ kɛ ka fini lamini, yeelen ni funteni jateminɛ.

• Export pakew, labels ani palet customization.

• Bulk supply ka ɲɛsin lanpan dilannikɛlaw ma, yeelenbɔlaw ma ani u feerelaw ma.

HSQY b’a ɲini ka PVC sugandilen ni nɔrɔli jɔcogo kɔrɔbɔ ni sannikɛla ka fini yɛrɛyɛrɛ ye, ni papier peint ye, ni tigɛcogo ye, karamɔgɔya dilanni ye, anpulu ani baarakɛcogo la sani a ka kɛ jamaba ye.

Aw ye fɛn wɛrɛw sɛgɛsɛgɛ PVC lanpanw sɛbɛnfura fɛnw , walima ka kuma HSQY fɛ walasa ka kunnafoni dɔ sɔrɔ min bɛ kɛ ka kɛɲɛ ni i yɛrɛ sago ye.

Aw ye HSQY lajɛ walasa ka misaliw ni sɔngɔko dɔn

Ɲininkali minnu bɛ kɛ tuma caman na yɛrɛlajɛ kan PVC Lampshade Sheet

Yɛrɛ nɔrɔlen PVC lanpan kɔkanna ye mun ye?

O ye PVC sɛbɛn gɛlɛn walima a tilancɛ gɛlɛn ye min datugulen don ni nɔrɔlan ye min bɛ se ka degun, wa a lakananen don ni bɔlifɛn ye. Fini, papiye walima papiye masirilen bɛ lamini ka kɛ nɔrɔlan kan walasa ka lanpan dɔ dilan min kɔkanna ka gɛlɛn.

Yala lanpan PVC ni lanpan styrene ye kelen ye wa?

U bɛ baara kɛ ni kɔkanna baara kelenw ye nka u bɛ baara kɛ ni polimɛri suguya wɛrɛw ye. PVC ni polisitiri bɛ se ka danfara don u gɛlɛyali la, u sɛgɛsɛgɛli la, u yeelen cogoya la, u baaracogo la, u ka nɔrɔli la ani u ka sariyaw la.

A ka c’a la, lanpan kɔkanna bɛ kɛ ni janya jumɛn ye?

HSQY janya minnu ka teli ka kɛ, olu bɛ se milimɛtɛrɛ 0,3 fo milimɛtɛrɛ 0,5 ma. Tuma caman na, ɲɛgɛn misɛnninw bɛ baara kɛ ni fɛn finmanw ye, ka sɔrɔ ɲɛgɛn belebelebaw walima ɲɛgɛn janw bɛ se ka kɛ sababu ye ka u gɛlɛya kosɛbɛ.

Yala milimɛtɛrɛ 0,3 PVC bɛnnen don lanpan ye wa?

0,3 mm sɛbɛn bɛnnen don dunun misɛnninw ni cɛmancɛ caman ma, tabali ani pendant nuances. A dafalen cɛmancɛ, a janya, a fini girinya ani a karamɔgɔya dilanni ka kan ka kɔrɔbɔ.

Tuma jumɛn na ne ka kan ka milimɛtɛrɛ 0,5 lanpan PVC kɛ ?

Milimɛtiri 0,5 sɛbɛn bɛ se ka sugandi walasa ka cɛmancɛ belebelebaw, panɛri janw walima dilan minnu bɛ jɔli gɛlɛya caman wajibiya. A tɛ se ka wuli kosɛbɛ, wa a bɛ se ka kɛ ko a bɛ se ka girin fanga caman de wajibiya.

Bonya jumɛnw bɛ sɔrɔ?

HSQY bɛ fɛnw dilan minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, minnu bɛ se milimɛtɛrɛ 1300 fo milimɛtɛrɛ 1500 ma. Baro bɛ se ka kɛ sɛbɛnw fana kan minnu bɛ kɛ ka kɛɲɛ ni sariya ye ani slit rolls minnu ka surun.

Yala o fɛnw bɛ se ka dilan sɛbɛnfura kɔnɔ wa?

Awɔ. Fɛnw dilancogo bɛ se ka kɛ jirisunw ye minnu bonya dafalen don, jirisunw tigɛlenw, sɛbɛn fla ani lanpanw tigɛlenw, ka kɛɲɛ ni u bonya ni komandi wajibiyalenw ye.

Yala fɛn dɔ bɛ o fɛn kɔnɔ min bɛ bɔli kɛ wa?

A ka ca a la, fɛn min bɛ bɔ a la, o bɛ nɔrɔ min bɛ se ka degun, o tanga sani a ka a kɛ. Liner minɛn, girinya, bɔli hakɛ ani sumanikɛlan sɛbɛnnen ka kan ka dafa sɛbɛn kɔnɔ.

Fini jumɛnw bɛ se ka kɛ nɔrɔlan kan?

Cotton, linen, polyester ani fini wɛrɛw bɛ se ka bɛn. Fini dacogo, finimugu, sɔgɔli, a kɛcogo ani plastiki bɛ se ka nɔ bila nɔrɔli la, o la lamination test ka kan ka kɛ.

Yala wallpaper bɛ se ka kɛ lanpan PVC kan wa ?

Wallpaper sugandilenw bɛ se ka lamini ka kɛɲɛ ni nɔrɔlen kɔkanna ye. A bonya, a sanfɛla datugucogo, a nɔgɔ, a kurulen ani a funteni kuntaalajan ka kan ka jateminɛ.

Yala baara bɛ se ka kɛ ni papiye masirilenw ye wa?

Awɔ. Masiri papiye, papiye sɛbɛnnen ani bolola papiye bɛ se ka kɛ ni sɛgɛsɛgɛli kɛlen kɔfɛ ni u ɲɛjibɔra, u bɛ bugunw, u kurukuruw, ni u bɛ se ka nɔrɔ ani ka yeelen bɔ.

Yala kola wɛrɛ ka kan ka kɛ wa?

A ka c’a la, datugulan kunba bɛ siri nɛgɛ min bɛ se ka degun, k’a sɔrɔ a ma kola ɲiginnen datugu a dan na. Semuw, dakunw kurulenw ani karamɔgɔya nɔrɔli bɛ se ka kɛ hali bi kaseti, nɔrɔlan walima ɲɔgɔnjɛ fɛɛrɛ wɛrɛ de wajibiya.

Yala o nɔrɔli bɛ to senna wa?

Nɔrɔli kɛcogo bɛ bɔ a furakɛcogo sugandilen na. Tack fɔlɔ, a ɲɛ laban fanga, funteni kunbɛnni ani kɔrɔya kuntaalajan ka kan ka ɲɛfɔ ani ka sɛgɛsɛgɛli kɛ datugucogo laɲininen na.

Yala fini bɛ se ka bila yɔrɔ wɛrɛ la a kɛlen kɔfɛ wa?

A bɛ se ka kɛ ko danmadɔ bɛ se ka kɛ yɔrɔ wɛrɛ la sani degun dafalen ka kɛ, ka kɛɲɛ ni nɔrɔlan ni fini suguya ye. Ni aw ye a bɔ siɲɛ caman, o bɛ se ka fini lamaga walima ka dɔ bɔ nɔrɔli baara la.

Bugunw ni kurukuruw bɛ se ka bali cogo di?

Aw bɛ baarakɛyɔrɔ flakɛ sanuman kɛ, ka finimugu bɔ dɔɔni dɔɔni ka datugulan kɛ ka bɔ fan kelen fɛ ni kurukuru walima sɔgɔsɔgɔninjɛ degun kelen ye.

Yala PVC kɔkanna bɛ kɛnɛ kan wa?

Sugandili minnu bɛ kɛ kɛnɛ kan, minnu bɛ kɛ yɔrɔ jɛlen na ani minnu ye fin ye, olu bɛ sɔrɔ. Sugandili ɲuman bɛ bɔ yeelen bɔli wajibiyalen na ani lanpan dafalen cogoya la.

Yala yeelen bɔli bɛ se ka kɛ ka kɛɲɛ ni mɔgɔw sago ye wa?

Yeelen tali bɛ se ka ladilan ni a bonya, a kulɛri, a opacity ani a kɛcogo ye. Sannikɛlaw ka kan ka sɔn yeelenbɔlan dɔ ma ni kɛnɛma datugulan yɛrɛ ye.

Yala matte PVC bɛ sɔrɔ wa?

Awɔ. Mati, satin ani glossy finiw bɛ se ka baro kɛ kɔnɔna lanpan sanfɛla la.

Yala a kɔnɔna bɛ se ka kɛ sanu walima warijɛ ye wa?

Kɔnɔna sugandili minnu bɛ kɛ ni nɛgɛ ye, olu bɛ se ka labɛn walima ka dilan i n’a fɔ finimugu lamininen. Kulɛri, yeelen, nɔrɔli ani funteni baarakɛcogo ka kan ka dafa.

Yala PVC sɛbɛn bɛ se ka sɛbɛn wa?

Yɔrɔ sugandilenw bɛ se ka sɛbɛnni dɛmɛ. Enki nɔrɔli, a kɛnɛyali funteni, a sɔgɔsɔgɔcogo ani a yeelen sabatili ka kan ka sɛgɛsɛgɛ sani a ka dilan.

Yala o fɛnw bɛ se ka tasuma kɛlɛ wa?

Tasuma baarakɛcogo bɛ bɔ PVC furakɛli tigitigi ni sɛgɛsɛgɛli kɛcogo la. PVC , nɔrɔlan, fini ani lanpan dafalen bɛ se ka kɛ cogo wɛrɛ la, o la, sisan kunnafoni dilen don jɔcogo wajibiyalen kan.

Yala nɔrɔlan bɛ se ka funteni kɛlɛ wa?

Funteni kunbɛnni bɛ bɔ nɔrɔli kemikali la, finimugu girinya, datugulan, doni ani a jirali waati. Lamini kɛlen ka kan ka sɛgɛsɛgɛ lanpan baarakɛcogo funteni makɔnɔnen na.

Yala o fɛn bɛ se ka kɛ anpulu dɔ kɛrɛfɛ wa?

A bɛnnenya bɛ bɔ anpulu watti la, funteni bɔli, a bonya cɛmancɛ, fiɲɛbɔ, a yɔrɔ janya ani yeelen sariya min bɛ sirataama. Lajɛ min kɛra ka ban, o ka kan ka funteni ni a lakanani jateminɛ.

Yala antistatique ni UV-stabilisé grades bɛ sɔrɔ wa?

O baarakɛcogo suganditaw bɛ se ka baro kɛ. Kɔrɔbɔli wajibiyalen, baarakɛcogo hakɛ, kulɛri ani baarakɛcogo makɔnɔnenw ka kan ka di sani u ka jatebɔ kɛ.

MOQ ye mun ye?

MOQ sariyalen min jiralen don nin fura in na, o ye kilo 2000 ye. Kulɛri minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, nɔrɔlanw, finimuguw walima furakɛlicogo minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka kɛ sababu ye ka u dilanni hakɛ wɛrɛ de wajibiya.

Yala misaliw bɛ sɔrɔ wa?

Awɔ. Misaliw bɛ se ka di walasa ka a janya, a gɛlɛya, a yeelen jɛnsɛnni, a nɔrɔli baara, a bɛ finiw bɛn ɲɔgɔn na ani a tigɛcogo lajɛ.

A dilanni ɲɛminɛ waati ye mun ye?

A dilanni cogoya bɛ baarakɛdon 15-20 ɲɔgɔn ta, fɛn dilannenw jɔcogo, u misali, u foroko dilanni ani u sarali dafalen kɔfɛ.

Kunnafoni jumɛnw de ka kan ka kɛ walasa ka quotation sɔrɔ?

Aw bɛ a janya, a bonya, a janya, a kulɛri, a tɛ ye, a sanfɛla fini, a datugulan, a nɔrɔli wajibiyalen, a kɔnɔna, a hakɛ, a baaracogo, a lakanani sariyaw, a foroko ani a taayɔrɔ di.

Aw ye Lampshade Custom PVC Quote sɔrɔ