PET/PE Laminated Thermoforming Film Wideyo
Aw ye wideyo lajɛ min bɛ duguma walasa ka kunnafoni wɛrɛw sɔrɔ HSQY PET/PE laminated thermoforming film kan, roll specifications, material structure ani dumuni-pake baarakɛcogo kan.
PET/PE Film thermoforming laminée ye mun ye?
PET/PE filimu lamininen ye pake gɛlɛn ye min bɛ kɛ ni fɛn caman ye, min bɛ poliyetilɛni tereftalati substrat amorphe ni polietilɛni datugulan fara ɲɔgɔn kan. A fana ɲɛfɔlen don ko A PET/PE filimu, PET laminated PE sɛbɛnfura min bɛ kɛ , PET/PE duguma web walima PET/PE thermoforming rollstock.
APET layɛrɛ bɛ kɛnɛya, gɛlɛya, sɔgɔsɔgɔninjɛ ani funteni-sɛnɛ baara di. PE layini bɛ yɔrɔ dɔ dilan min bɛ se ka datugu ni funteni ye ani ka ji, ji ani pakew bɔli kunbɛncogo ɲɛ.
HSQY bɛ filimu jɛlen PET/PE lamininen di ni a janya bɛɛ lajɛlen hakɛ bɛ se milimɛtɛrɛ 0,23 fo milimɛtɛrɛ 0,58 ma. Jateminɛ kɛcogo jɔnjɔn bɛ baara kɛ ni APET substrat ye min lamininen don ni LDPE sigilan ye min bɛ se 50 μm ma.
O fɛn bɛ dilan rollow kɔnɔ minnu bonya bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, rollo cɛmancɛw ani winding specifications. Paper-core sugandicogo jɔnjɔnw ye 3-inch ani 6-inch cores ye walasa ka bɛn ni thermoforming ani form-fill-seal packaging minɛnw ye.
PET/PE thermoforming film bɛ kɛ ka caya sogo nɛnɛma ni nɛnɛma, jɛgɛ, kɔgɔjilafɛnw, foromazi, nɔnɔmafɛnw, pasta kura, dumuni labɛnnenw ani fɛn wɛrɛw la minnu bɛ tiriwari gɛlɛn jɛlen dɔ wajibiya ni funteni datugulan ye min bɛ se ka da a kan.
Weld-seal ani peelable structures bɛ se ka labɛn ka kɛɲɛ ni lidding film ye, tiriwari -sealing minɛnw, maracogo ani da wuli fanga wajibiyalen.
Filimu jɔnjɔn PET/PE man kan ka ɲɛfɔ a yɛrɛma iko oksizɛni caman bɛ min na. Baara minnu bɛ kɛ ni waati jan ye walima ni oksizɛni tali ka dɔgɔn kosɛbɛ, olu bɛ se ka kɛ sababu ye ka PET/EVOH/PE walima fɛn wɛrɛ ɲini min sɛgɛsɛgɛra ni barika caman ye.
Demand PET/PE Filimu sɔngɔko Aw ye Materiel Samples ɲini
PET/PE Laminés Film Jaw
![Aw bɛ PET PE lamininen thermoforming film roll jɛlen kɛ dumuni foroko kama]( "PET PE Laminated Thermoforming Film Roll")
Clear PET/PE Filimu rollo min bɛ kɛ ni thermoforming ye
![APET PE laminated rigid film for sogo jɛgɛ ni foromazi foroko]( "APET PE Laminated Film for Food Packaging")
A PET/PE Dumunifɛnw foroko filimu lamininen
PET/PE Laminated Film Tekniki kunnafonisɛbɛn
Donanw bɛ sɔrɔ sɛbɛnfura min bɛ kɛ telesarse walasa ka jateminɛ fɔlɔ kɛ. Sannikɛlaw ka kan k’a jira ko sɛbɛn in bɛ tali kɛ a janya tigitigi la, PE-layer specification, sealing grade ani production batch min bɛ komandi.
Télécharger PET/PE Filimu lamininen kunnafonisɛbɛn
PET/PE Filimu lamininenw ka ɲɛfɔliw
| Nafolo |
sɔrɔcogo ɲɛfɔli |
| Fɛn dilannen Tɔgɔ |
PET/PE Filimu lamininen min bɛ kɛ ka thermoforming ni dumunifɛnw foroko kɛ |
| Tɔgɔ wɛrɛw |
A PET/PE filimu, PET lamini PE sɛbɛnfura min bɛ kɛ , PET/PE duguma web ani PET/PE thermoforming rollstock |
| Structure Standard (Sɔrɔcogo sariyalen). |
APET substrat ni LDPE sigicogo |
| Layɛrɛ PE sariyalen |
LDPE 50 μm ɲɔgɔn |
| Layer PE ladamulen |
Ka kɛɲɛ ni sigilan fanga ye, a ɲɛkisɛ baarakɛcogo, filimu bɛnkan ani komandi fitinin wajibiyalenw |
| Total Thickness (A bɛɛ lajɛlen). |
A bɛ Taa milimɛtɛrɛ 0,23-0,58 ɲɔgɔn na |
| Misali la, Jateblaw |
180/50 μm, 200/50 μm, 250/50 μm, 300/50 μm, 400/50 μm ani faralenw faralen ɲɔgɔn kan minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye |
| PET Fɛnɲɛnɛma sugandilenw |
Virgin APET walima RPET -min kɔnɔ sigicogo bɛ kɛ ka kɛɲɛ ni jɛya, sariya labatoli ani segin-ka-bɔ-kɔnɔkow wajibiyalenw ye |
| Yecogo |
Kulɛri jɛlen, jɛlen, tintin walima ka kɛɲɛ ni mɔgɔw sago ye |
| Kɛnɛ |
Furakɛli min bɛ manamana, a ma ɲɛ, a bɛ silikoni kɛ, a bɛ bloki kɛlɛ walima a bɛ kɛ ka kɛɲɛ ni a yɛrɛ sago ye |
| Formulaire de fourniture |
Thermoforming rolls, slit rolls walima ka kɛɲɛ ni mɔgɔw sago ye sɛbɛnfura min bɛ kɛ s |
| Roll Width (Bɔli). |
A bɛ kɛ ka kɛɲɛ ni thermoforming-machine ani trim-tool wajibiyalenw ye |
| Core Diameter (Kɔnɔna) Diameter |
3-inch walima 6-inch kɔnɔna |
| Roll Diamètre (Damɛtiri min bɛ kɛ ni wuli ye). |
A bɛ kɛ ka kɛɲɛ ni masin seko ye, roll weight, core ani transport requirements |
| Roll Kisɛ |
Kilo 50 ɲɔgɔn walima a bɛ kɛ ka kɛɲɛ ni otomatiki sɛnɛfɛnw dilanni siraw ye |
| Seginkanni Grade (Sɛbɛnni) Grade |
Weld-seal, lock-seal walima peelable grade ka kɛɲɛ ni lidding-film bɛnkan ye |
| Baarakɛcogo fɛɛrɛw |
Thermoforming, vacuum forming, pressure forming ani foroko-falen-sigili baarakɛcogo |
| Aplikasi minnu bɛ kɛ ka kɛɲɛ ni sariya ye |
Sogo, jɛgɛ, kɔgɔjilafɛnw, foromazi, nɔnɔmafɛnw, pasta kura, dumuni labɛnnenw ani fɛn nɛnɛmanw walima fɛn minnu sumana |
| Sugandili min bɛ kɛ ni barika caman ye |
PET/EVOH/PE walima fɛn wɛrɛ min sɛgɛsɛgɛra ni fɛn caman ye, baarakɛcogo minnu bɛ oksizɛni tali dɔgɔyali wajibiya |
| Dumuni-ɲɔgɔn-ɲini Sugandili |
A bɛ sɔrɔ ni baarakɛminɛn kɛrɛnkɛrɛnnenw ye minnu bɛ dumunifɛnw sɔrɔ ani sɛbɛnw |
| Furakɛcogo walima Furakɛcogo |
A bɛ fɛnw danfara, saniya, sigili ani sariyaw jateminɛni de wajibiya |
| Koman hakɛ fitinin |
Kilo 1000 ɲɔgɔn bɛ kɛ ka kɛɲɛ ni sariyaw ye; ladamu sigicogo bɛ se ka MOQ wɛrɛ de wajibiya |
| Esantiyɔn |
A4 sɛbɛnfura min bɛ kɛ s walima danma roll samples bɛ se ka sɔrɔ; courier doni bɛ lajɛ cogoya la |
| Sarali sariyaw |
T/T, L/C ani sariya wɛrɛw minnu bɛ tali kɛ jago siratigɛ la |
| Jagokɛlaw ka sariyaw |
EXW, FOB, CNF, CIF ani diɲɛ jagokɛcogo wɛrɛw bɛnna minnu kan |
| Typique Production Waati |
Tile 10-14 ɲɔgɔn ɲɛfɔli, wari sarali ani pakew dafalen kɔfɛ |
| Foroko minnu bɛ kɛ |
Lakanali roll wrapping ani plywood pallets walima ka kɛɲɛ ni mɔgɔw sago ye ka taa jamana wɛrɛw la |
Muɲuli laban muɲuni, kuru bonya, kurukuruli sira, kurukuru cɛmancɛ, a kɔnɔna, PE-layer specification, sigilan fanga ani dumuni ni ɲɔgɔn cɛ wajibiyalenw ka kan ka dafa ni misali ye min dabɔra ani ni fɛn dilannenw ɲɛfɔli sɛbɛnnen ye.
PET/PE Lamined Film Layer Structure
| Layer |
Primaire Function |
Key Kunnafoni-falen-falen yɔrɔw |
| APET Layɛrɛsi sigicogo |
A bɛ jɛya, gɛlɛya, sɔgɔsɔgɔninjɛ ani thermoforming dɛmɛni di |
PET grade, intrinsic viscosity, kɔnɔkow lasegincogo, jɛya ani a bonya tilatilali |
| Lamination walima Tie Interface (Lamini walima Tie Interface). |
A bɛ nɔrɔli mara PET ni PE layiniw cɛ u dilanni, u datuguli ani u marali waati |
Bond fanga, delamination resistance, dumuni ni ɲɔgɔn cɛ cogoya ani recyclage nɔ |
| PE Layɛrɛ min bɛ sigi sen kan |
A bɛ funteni datugu, ka ji kɛlɛ, ka ji kɛlɛ ani ka bɛn ni datugulan filimu sugandilenw ye |
PE kemisi, finimugu janya, sigilan daminɛ funteni, a ɲɛkisɛ fanga ani nɔgɔ kunbɛnni |
| Surface Furakɛli min bɛ kɛ ni ŋaniya ye |
A bɛ densting, anti-block, anti-fog, imprimerie walima contrôlé coefficient de friction dɛmɛ |
Furakɛli fan fɛ, jiginni, dumuni ni ɲɔgɔn cɛ sariya labatoli ani thermoforming muɲuli |
Mun na ka APET fara ɲɔgɔn kan ni PE sigilan ye?
PET A bɛ gɛlɛya ni fɛn dilannenw yecogo di
APET bɛ jɔli gɛlɛya di min ka kan ka kɛ walasa ka sanubɔlanw ni minɛnw dilan ka sɔrɔ ka fɛn dilannenw yecogo jɛlen mara. A fana bɛ dɛmɛ don tigɛcogo saniyalen na ani hakɛ sabatili la dumuni nɛnɛmaw foroko kɔnɔ.
PE bɛ yɔrɔ dɔ Dabɔ min bɛ Se ka Dabɔ ni funteni ye
Standard APET tɛ funteni-sigicogo tilennen kelen di i n’a fɔ PE sigicogo min dilannen don ni kuntilenna ye. PE fan bɛ se ka bɛn ni sanfɛla filimuw ye minnu bɛ bɛn ɲɔgɔn ma walasa ka welda lakananen walima peel kɔrɔsilen dilan.
PE bɛ ji ni jilama kunbɛncogo ɲɛ
PE layini bɛ jisuma, sogoji, jisuma, tulu ani ji wɛrɛw kɛlɛli ɲɛ ka taa a fɛ minnu bɛ sɔrɔ dumuni nɛnɛmaw foroko kɔnɔ.
O jɔcogo faralen ɲɔgɔn kan, o bɛ otomatiki pakew dɛmɛ
PET/PE rollstock bɛ se ka dilan, ka fa ani ka datugu otomatiki layiniw kan minnu bɛ bɛn ɲɔgɔn ma, ka dɔ bɔ tiriwari minɛcogo danfaralenw na ani ka dumuni-pake dilanni sabatili dɛmɛ.
PET/PE ni APET ani PET/EVOH/PE
| Sanga |
Mono APET |
PET/PE |
PET/EVOH/PE |
| Kɛnɛyako |
Jamanjan |
Kɔrɔta, ka kɛɲɛ ni laminati jogo ye |
Kɔrɔta fo ka se a danma ma, ka kɛɲɛ ni a jɔcogo bɛɛ lajɛlen ye |
| Rigidité (Jɛkabaara). |
Jamanjan |
Jamanjan |
Jamanjan |
| Direct Heat-Sealing Surface (yɔrɔ min bɛ funteni-sigi-yɔrɔ). |
Dan tɛ ni finimugu walima sigilan ye min bɛ bɛn a ma |
PE sigilan layɛrɛ |
PE sigilan layɛrɛ |
| Jiko kunbɛnni |
Duman |
A ɲɛnabɔra ni PE layɛrɛ ye |
A ɲɛnabɔra ni PE layɛrɛ ye |
| Oksizɛni barikalan |
Moderate ani grade dependent |
A ka c’a la, a tɛ jate sigida kɛrɛnkɛrɛnnen ye min bɛ oksizɛni caman bali |
A dabɔra walasa ka oksizɛni tali dɔgɔya kosɛbɛ ni a ɲɛfɔra ka ɲɛ |
| Baarakɛcogo minnu bɛ Kɛ cogoya la |
Kɔlɔnw, dawolo, sanubɔlanw ani dumuni nɛnɛmaw foroko |
Sogo, jɛgɛ, foromazi, nɔnɔ ani FFS foroko minnu datugulen don ni funteni ye |
MAP , sogo, foromazi ani fɛn minnu bɛ sɔrɔ oksizɛni na, minnu bɛ mɛn |
| Sugandili wajibiyalen |
Aw bɛ a jɔcogo sugandi ka kɛɲɛ ni fɛn dilannenw marali waati ye, OTR, WVTR, sigilan baarakɛcogo, foroko juguya, a maracogo funteni ani a lasegincogo wajibiyalenw |
PET/PE Filimu lamininen ka fɛn kolomaw
Transparence haute ani Gloss
APET layɛrɛ bɛ fɛn dilannenw yecogo jɛlen di ani ka feerekɛyɔrɔ yecogo jɛlen di sogo, kɔgɔjilafɛnw, foromazi, dumuni labɛnnenw ani fɛn nɛnɛma wɛrɛw ma.
Thermoforming baarakɛcogo min bɛ se ka da a kan
PET/PE filimu min kofɔlen don ka ɲɛ, o bɛ se ka dilan ni vacuum ye walima ka degun kɛ ka kɛ sanubɔlanw ye ni nkɔni, flansɛw ani kɔnɔna jugumanw ɲɛfɔlenw ye.
PE Surface min bɛ se ka datugu ni funteni ye
LDPE layɛrɛ bɛ se ka dilan ka kɛ welda sigilan barikamaw ye walima sigilan minnu bɛ se ka bɔ kɛnɛ kan minnu bɛ se ka kɔrɔsi ni datugulan filimuw ye minnu bɛ bɛn ɲɔgɔn ma.
Ji ni jilamaw kɛlɛli
PE sigilan bɛ dɛmɛ ka foroko tanga ji ma, furajiw, jisuma ani jibɔ ma a marali nɛnɛnen walima nɛnɛ na.
Impact ani Puncture baarakɛcogo
APET bɛ gɛlɛya waleyali di sanubɔlanw sigilenw ma, bolifɛnw ni feerelikɛlaw ka baarakɛcogo. Kolow nɛrɛmuguma, dawolo nɛnɛma ani nkɔni minnu bɛ sama ka dun, olu ka kan ka jateminɛ ni fura yɛrɛ ye.
Weld-Seal ani Peelable Sugandili
PE furakɛcogo suguya caman bɛ se ka sugandi walasa ka da tugu kudayi walima ka ɲɛgɛn da wuli minnu bɛ se ka kɛ mɔgɔw fɛ.
FFS Layini bɛnkan
Rollo bonya, a kɔnɔna, a kurulen sira ani a rollo cɛmancɛ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka thermoform-fill-seal pakew sinsinni dɛmɛ.
Furakɛli minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye
Anti-block, silicone, anti-fog, antistatic, tinted ani baarakɛcogo kɛrɛnkɛrɛnnen wɛrɛw bɛ se ka baro kɛ ka kɛɲɛ ni baarakɛcogo ni pakew dilanni wajibiyalenw ye.
Thermoforming ani FFS baarakɛcogo ɲɛfɔli
Aw bɛ PE fan dɔ sɛgɛsɛgɛ Sani aw ka rollo doni
PE sigilan yɔrɔ ka kan ka ɲɛsin sira ɲuman ma foroko dilannen kɔnɔ. Rollo winding ni furakɛli-kɛrɛ dɔnni ka kan ka dafa sani a ka dilan.
Aw bɛ Profil de Souffle (Profil de Souffle) kɔlɔsi
Sumaya ka kan ka PET nɔgɔya ka se ka dilan ka sɔrɔ a ma sumaya kojugu, ka kristali kɛ walima ka PE sigilan tiɲɛ.
Aw ye Deep-Draw Wall Distribution jateminɛ
Kɔnɔna jugumanw, nkɔni nɔgɔlenw ani jatebɔ hakɛ belebelew bɛ se ka jɔli fin. tiriwari min dilannen don, o ka kan ka lajɛ ni kogo janya ka dɔgɔn, ni pinɛw ni sigilan-flange sabatili ka dɔgɔn.
Kɔlɔsili kɛ Flange Surface kan
Kurukuruw, u dilanni ɲɔgɔn tɛ, dumuni nɔgɔli ani furaji minnu bɛ flansɛ kan, olu bɛ se ka dɔ bɔ sigili dannaya la.
Aw ye Top Film ni Bottom Web bɛn ɲɔgɔn ma
Datugulan filimu sigilan ka kan ka bɛn PE sigilan ma. Sigilan funteni, tansiyɔn ani sigi waati ka kan ka sigi sen kan ni sɛnɛfɛnw dilanni kɔrɔbɔliw ye.
Aw ye pakew dilanni taabolo dafalen kɔrɔbɔ
Sɔn laban ka kan ka kɛ ni dumunifɛn yɛrɛ dilanni ye, ka a fa, ka a datugu, ka a nɛnɛ walima ka a nɛnɛ, ka taa ni a ye, ka a mara, ka a da wuli ani ka a maracogo kɔrɔbɔ ni dumunifɛn yɛrɛ ye.
Soudure-Seal vs Peelable PET/PE Filimu
| Sanga |
Weld-Seal walima Lock-Seal |
Peelable Seal |
| Dakabanɔgɔ Fɛɛrɛ |
Siginiden banbali barikama min bɛ se ka kɛ sababu ye ka tigɛ walima ka filimu tigɛ |
Filimu dabɔra ka bɔ tiriwari flansɛ la |
| Siginidenw ka fanga |
Bond fanga ka bon ka ɲɛsin transport demanding ani leak-resistance wajibiyalenw ma |
Dakabanɔgɔ fanga kɔrɔsilen walasa ka musakakɛlaw nɔgɔya |
| Baarakɛcogo min bɛ kɛ cogoya la |
Industri pakew, dumuni minnu farati ka bon ka bɔgɔ bɔ ani pake minnu ma dabɔ bolo dabɔli nɔgɔya kama |
Sogo, foromazi, dumuni labɛnnenw ani foroko minnu bɛ se ka feere feerekɛlaw ma, olu feere |
| Kɔrɔbɔliba |
Burst, leak, transport ani seal-integrity sɛgɛsɛgɛli |
Peel fanga, consistency, fibre tear ani nɛnɛ-marayɔrɔ baarakɛcogo |
PET/PE Filimu sigicogo Paramɛtiriw
Sigili kɛcogo bɛ bɔ PE dilanni na, datugulan-filimu datugulan, tiriwari -flange cogoya ani pake-masin sigicogo.
Siginidenw ka funteni.
Daɲɛw sigicogo degun.
Sigi waati.
Baarakɛminɛnw funteni hakɛ kelen.
PE-layer ka bonya ani a ka chimie.
Lidding-film sigilan jɔcogo.
Fɛn dilannenw nɔgɔli flansɛ kan.
A maracogo nɛnɛma walima nɛnɛ na.
Weld walima peel fanga wajibiyalen.
Kɔrɔbɔli minnu laadilen don, olu ye sigilan fanga sumani ye, kalali doncogo sɛgɛsɛgɛli, vacuum leak testing, burst testing, transport simulation ani fɛn kɛrɛnkɛrɛnnenw ka fɛnw maracogo kɔrɔbɔli.
PET/PE Filimu lamininen ka baarakɛcogo
Sogo kuraw foroko
PET/PE filimu bɛ se ka dilan ka kɛ sanubɔlanw jɛlenw ye ani dugumalan ye misisogo, donsokɛ, sagasogo, kɔnɔsogo ani sogo dilannenw kama minnu bɛ kɛ ni pake ye min datugulen don ni funteni ye.
Jɛgɛ ni Kɔgɔjilafɛnw foroko
Ji kunbɛnni ani sigilan dafalen bɛ kɛ sababu ye ka a jɔcogo bɛnnen don jɛgɛ nɛnɛma sugandilenw, kɔgɔjilafɛnw ani fɛn dilannenw na minnu dilannen don ni mɔbili ye.
Foromazi ni nɔnɔko foroko
PET/PE rollstock bɛ se ka kɛ foromazi tilayɔrɔw ye, foromazi tigɛlenw, nɔnɔ misɛnninw ani friji kɔnɔfɛn wɛrɛw ni oksizɛni barika wajibiyalen ni sigilan fanga tiɲɛna.
Pasta kura ka foroko
PET/PE foroko dilannenw bɛ se ka pasta kuraw, dumunikɛminɛnw ani mugu dilannenw dɛmɛ minnu bɛ kɛ nɛnɛ na, minnu ka kan ka jira ka jɛya ani ka u mara cogo datugulen na.
Dumuni labɛnnen minnu nɛnɛna
O fɛn bɛ se ka kɛ salatiw ye, dumuni nɛnɛmanw, dumunifɛnw ani dumuni labɛnnen wɛrɛw minnu nɛnɛnen don, minnu tɛ baara kɛ ni foro kɔrɔlen ye.
Dumunifɛnw foroko minnu bɛ kɛ ni nɛnɛ ye
PET/PE kalasi bɛnnenw bɛ se ka jateminɛ ka ɲɛsin marali ma min bɛ kɛ nɛnɛ na. Funteni dɔgɔyali nɔfɛko, sigilan dafalen ani pakew tiɲɛni ka kan ka sɛgɛsɛgɛ ni fura yɛrɛ ye.
Fura ni furakɛli foroko
Furakɛcogo walima furakɛli siratigɛ la, o bɛ ɲini ka kɛ ni grade ye min bɛ se ka kɛ danfara la, ka fɛn dilanni cogoya kɔlɔsi, ka taamasiyɛnw tiɲɛni ani ka sariyaw sɛbɛn minnu bɛ tali kɛ baarakɛcogo kɛrɛnkɛrɛnnenw na.
![PET PE laminated thermoforming film ka kɛ sogo kuraw foroko ye sanubɔlanw]( "PET PE Film for Meat Packaging")
PET/PE Filimu min bɛ kɛ dumuni kuraw foroko kɔnɔ
![APET PE laminé film thermoformé ka kɛ dumuni foroko datugulen ye tiriwari]( "APET PE Thermoformed Food Tray")
A PET/PE Ɲɛgɛnɛsiraw labɛncogo Dumuni tabali
Barika baarakɛcogo ani a maracogo jateminɛw
PET/PE pakew man kan ka ɲɛfɔ ko oksizɛni, gazi walima ji-dafalan jɔlen bɛ u la ni kunnafoniw ma suman fɛnw jɔcogo tigitigi n’u girinya kan.
Oksizɛni tali hakɛ ni ji-dafalen hakɛ bɛ bɔ a janya bɛɛ lajɛlen na, PET hakɛ, PE girinya, lamini cogoya, funteni, nɛnɛ ani sɛgɛsɛgɛli kɛcogo.
Standard PET/PE bɛ sugandi fɔlɔ ka ɲɛsin thermoforming jɛlen ma ani funteni sigili ma. A bɛ se ka lakana bɛrɛbɛrɛ di dumuni nɛnɛma caman ma, nka a tɛ EVOH sɛgɛsɛgɛlen walima oksizɛni caman sɔrɔcogo wɛrɛ nɔnabila ye.
A marali waati bɛ bɔ fɛn dilannenw ka ɲumanya la, saniya, gazi ɲagaminen, sigilan dafalen, a maracogo funteni, kunkolo yɔrɔ, datugulan filimu ani u tilatilali cogoya. A maracogo fɔlenw bɛ sɛgɛsɛgɛli de wajibiya ni dumuni yɛrɛ ye.
Funteni ni funteni dantigɛliw
Standard A PET/PE thermoforming film dabɔra kosɛbɛ dumunifɛnw foroko kɔnɔ minnu bɛ lamini, minnu bɛ friji kɔnɔ ani minnu bɛ kɛ nɛnɛ na. A man kan ka fɔ a yɛrɛma ko a tɛ se ka kɛ mikro la walima ko a tɛ se ka kɛ foro kɔrɔ la.
Hot-fill bɛnnenya bɛ bɔ PET hakɛ kɛrɛnkɛrɛnnen na, PE layɛrɛ, fɛn dilannen funteni, fasa waati ani pake dɛmɛni. Funteni-falen cogoya min ka bon kosɛbɛ, o ka kan ka dafa ni fɛɛrɛko kunnafoniw ye minnu bɛ tali kɛ kalasi kɛrɛnkɛrɛnnenw na.
Walasa ka dumuni foroko minnu bɛ se ka kɛ mikrowɛn na walima minnu bɛ kɛ foro kɔnɔ, aw bɛ PP walima CPET sigicogo kɛrɛnkɛrɛnnen jateminɛ sanni aw k’a miiri ko sariya A PET/PE bɛna to a hakɛ la.
Dumuni-ɲɔgɔn-ɲini ani sariyaw ka wajibiw
Dumuni ni ɲɔgɔn cɛ bɛnnen bɛ bɔ PET resin tigitigi la, a kɔnɔfɛnw lasegincogo, PE sigilan, sirilan, baarakɛcogo dɛmɛnanw, dugukolo sanfɛla furakɛli ani a dilanni ɲɛfɔli.
Sannikɛlaw ka kan ka taa sugu di u ma, dumuni suguya, a maracogo funteni, a magali waati, tulu walima asidi hakɛ, nɛnɛ cogoya ani a facogo laɲininen.
SGS sɛgɛsɛgɛli rapɔɔriw bɛ se ka kunnafoni nafamaw di fɛn dilannenw sɛgɛsɛgɛli la, nka kunnafoni ka kan ka bɛn fɛnw jɔcogo tigitigi ma ani baarakɛcogo laɲininen ma.
ISO 9001 ye jogoɲumanya-sɛnɛcogo sariya ye, wa a man kan ka kɛ a yɛrɛ ye i n’a fɔ dumuni ni ɲɔgɔn cɛ sariya labatoli dalilu.
Segin-ka-bɔnye ni sabatili jateminɛw
PET/PE ye fɛn caman sigicogo ye. A ni PET lasegincogo bɛ tali kɛ PE hakɛ la, laminati dilanni, nɔrɔlanw, enkiw, labeliw, dumuni nɔgɔli ani sigida lasegincogo infɔrɔmasiko la.
Fɛn dilannen man kan ka fɔ ko a bɛ se ka kɛ diɲɛ bɛɛ kɔnɔ walima ko a bɛ se ka segin ka kɛ fɛn wɛrɛ ye pewu fo n’a seginni kɛcogo jateminɛna sugu laɲininen kama.
RPET -based structure layer bɛ se ka dɔ bɔ npogotiginin- PET dunni na, nka a kɔnɔfɛnw minnu bɛ se ka segin ka kɛ fɛn wɛrɛw ye, olu bɛ bɔ dumuniko sariyaw la, jɛya, masinw baarakɛcogo ani kiliyanw ka ɲininiw.
Ka dɔ bɔ jatebɔlan bɛɛ lajɛlen na, ka foroko tilatilali ɲɛ ani ka rollo ni palɛti doni kɛcogo ɲuman kɛ, o bɛ se ka dɔ bɔ fɛnw ni bolifɛnw nɔfɛkow la k’a sɔrɔ i ma segin-ka-bɔnyew fɔ minnu tɛ dɛmɛ.
Fɛnw ni u foroko sɛgɛsɛgɛli minnu bɛ fɔ
Total thickness ani kelen-kelen layɛrɛ janya.
Rollo bonya, roll diameter, core diameter ani winding direction.
Transparence, haze, gloss ani nɔgɔ yelenw.
Lamination bond ani delamination resistance.
Coefficient de friction ani roll-unwinding baarakɛcogo.
Thermoforming funteni ni foroko finɛtiri.
Kogo-kɛnɛya tilatilali sɛnɛni kɔfɛ.
Flange flatness ani sealing-surface consistance.
Sigili daminɛ, sigilan fanga ani ɲɛgɛn kɛcogo.
Leak, burst ani transport resistance.
Funteni dɔgɔyali nɔ ani a maracogo min bɛ kɛ ni nɛnɛ ye.
OTR ani WVTR yɔrɔ minnu na, fɛnw marali waati bɛ bɔ barika baarakɛcogo la.
Dumuni ni ɲɔgɔn cɛ jiginni walima sariya labatoli sɛgɛsɛgɛli walasa ka a jɔcogo tigitigi sɔrɔ.
A maracogo sɛgɛsɛgɛli ni dumuni ni datugulan filimu yɛrɛ ye.
Custom PET/PE Filimu lamininen sugandiliw
A bɛɛ lajɛlen janya bɛ daminɛ milimɛtɛrɛ 0,23 ɲɔgɔn na ka se milimɛtɛrɛ 0,58 ma.
PE sigilan 50 μm standard.
PE janya ni a sigicogo min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.
Npogotiginin APET walima RPET -min bɛ substrat.
Kulɛri jɛlenw, tintinw ani minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.
Weld-seal, lock-seal walima peelable grade.
Anti-block, silicone-coated ani anti-fog sugandiliw.
Custom roll width ani slit bonya.
Paper cores minnu janya ye santimɛtɛrɛ 3 walima santimɛtɛrɛ 6 ye.
Rollo diamètre ni rollo girinya min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.
PET/EVOH/PE barikalanba-yɔrɔw.
Labɛn minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, kartɔnw ani palɛtiw.
Kunnafoni minnu ka kan ka kɛ PET/PE Filimu Quotation kama
Fɛn bɛɛ lajɛlen girinya.
PET ani PE layɛrɛ janya wajibiyalenw.
Npogotiginin APET walima RPET -kɔnɔkow wajibiyalen.
Rollo bonya, rollo cɛmancɛ ani a kɔnɔna cɛmancɛ.
Winding direction ani PE sigili fan fɛ.
Thermoforming-machine model ani foroko juguya.
Dumunifɛn, fasa funteni ani a maracogo.
Weld-seal walima peelable da wulicogo wajibiyalen.
Lidding-film structure ani sealing-machine paramètres.
OTR, WVTR walima MAP barikalanw wajibiyalenw.
Bugun kɛlɛli, bloki kɛlɛli, silikoni walima yɔrɔ wɛrɛw furakɛli.
Dumuni-ɲɔgɔn-ɲini ani taa-yɔrɔ-sɔgɔli wajibiyalenw.
Kɔrɔbɔli hakɛ, caman komandi ani san ɲinini.
Foroko, palɛti, labeliw, taayɔrɔ port ani jiginni don.
Aw ka PET/PE Filimu wajibiyalenw ci
Packing ani Delivery Sugandiliw
Misaliw foroko : A4 sɛbɛnfura min bɛ kɛ s walima danma roll samples bɛ se ka pake lakanabagaw ni kartɔnw kɔnɔ.
Kurukuruw foroko: Kuluw labɛncogo bɛ kilo 50 ɲɔgɔn bɔ walima u bɛ kɛ ka kɛɲɛ ni sannikɛla ka masin doni wajibiyalenw ye.
Kurukuruw lakanani : Kuluw bɛ se ka siri ni PE filimu ye, ni fɛn ye min tɛ ji bɔ, ni a laban datugulanw ye minnu bɛ u tanga ani ni kɛnɛmafɛnw ye.
Palɛtiw foroko : Kilo 500-2000 ɲɔgɔn bɛ se ka don plywood palɛti kan ka kɛɲɛ ni kurukuru bonya, a cɛmancɛ ani fɛnmarayɔrɔ baarakɛcogo wajibiyalenw ye.
Minɛn doni : Doni min bɛ kɛ cogoya la, o bɛ se tɔni 20 ma, ka kɛɲɛ ni kurukuru hakɛw ye, palɛtiw cogoya ani minɛnw girinya dantigɛliw.
Lasecogo: EXW, FOB, CNF, CIF ani jagokɛcogo wɛrɛw minnu bɛnna.
A dilanni waati danma: Tile 10-14 ɲɔgɔn bilalen kɔfɛ ani a ɲɛfɔli laban dafalen kɔfɛ.
![PET PE laminated thermoforming film rolls minnu bɛ pakew kan export pallets kan]( "PET PE Laminated Film Packing")
Sɛbɛnw ni jogoɲumanya sɛbɛnw
Sɛbɛn minnu bɛ sɔrɔ, olu bɛ se ka kɛ SGS ka fɛn dilannenw sɛgɛsɛgɛli rapɔɔriw ye ani ISO ɲɛnabɔli-sitɛmu seereyaw. Sɛbɛn minnu wajibiyalen don, olu ka kan ka lajɛ ni PET/PE jɔcogo tigitigi ye, u fɛnɲɛnamafagalanw, u bonya ani u kɛcogo laɲininen.
ISO ka jogoɲumanyasɛbɛn min bɛ a yɛrɛ jira, o t’a jira ko filimu bɛ dumuniko, furakɛli, furakɛli, mikro walima fɛnw lasegincogo sariyaw labato.
![HSQY jogoɲumanya ni sariya labatoli sɛbɛnw ye PET PE lamini pakew filimu ye]( "HSQY PET PE Film Certifications")
Mun na i bɛ HSQY sugandi ka kɛ i ka PET/PE filimu dilanbaga ye?
HSQY Plastic Group bɛ PET , PET/PE , PET/EVOH/PE , PP, CPET ani thermoforming ni dumunifɛnw foroko fɛn wɛrɛw di pakew tigɛbagaw ma, dumuni dilannikɛlaw, tilabagaw ani diɲɛ sannikɛlaw ma.
PET/PE filimu lamininen ka bɔ milimɛtɛrɛ 0,23 ɲɔgɔn na ka se milimɛtɛrɛ 0,58 ma.
Standard 50 μm ɲɔgɔn LDPE sigicogo.
Weld-seal ani peelable fɛnw suganditaw.
A bonya, roll diamètres ani winding directions customized.
3-inch ani 6-inch core sugandiliw.
Npogotiginin APET ani RPET -kɔnɔkow sigicogo.
PET/EVOH/PE barika caman bɛ sɔrɔ a nɔ na.
Anti-block, silicone ani anti-fog sugandiliw.
Misali minnu bɛ kɛ ka fɛnw dilan, ka u datugu ani ka u maracogo jateminɛ.
Customized export packing ani bulk-production dɛmɛni.
HSQY b’a ɲini ka filimu sugandilen kɔrɔbɔ sannikɛla ka dilancogo, a facogo ani a datugulan lakikaw kan sani u ka sɔn a dilanni ma kosɛbɛ.
Aw ye HSQY lajɛ walasa ka misaliw ni sɔngɔko dɔn
HSQY Duniya Ɲɛjirali
HSQY Plastic Group bɛ thermoforming sɛbɛnfura min bɛ kɛ s, laminated packaging films, dumuni sanubɔlanw ani sealing solutions jira diɲɛ plastiki ni pakew jirali la.
![HSQY Plastic Group jirali PET PE laminated film ani dumuni pakew dilanni na]( "HSQY Plastic Group Exhibition")
Ɲininkali minnu bɛ kɛ tuma caman na PET/PE Laminated Film kan
PET/PE filimu lamininen ye mun ye?
PET/PE filimu lamininen bɛ APET sigicogo gɛlɛn ni poliyetilɛni funteni-sigilan fara ɲɔgɔn kan walasa ka foroko thermoformed ani form-fill-seal pakew kɛ.
A PET/PE kɔrɔ ye mun ye?
APET kɔrɔ ye poliyetilɛni tereftalati amɔrifu ye, ka sɔrɔ PE kɔrɔ ye poliyetilɛni ye. APET bɛ gɛlɛya ni jɛya di, ani PE bɛ yɔrɔ di min bɛ se ka datugu ni funteni ye.
Yala PET/PE filimu ni laminati flexible ye kelen ye wa?
Nin fura in ye jukɔrɔla web ye min bɛ kɛ ni funteni ye, min bɛ kɛ ni funteni ye, min ka gɛlɛn walima min bɛ se ka kɛ fɛn ye min bɛ se ka wuli, sanni ka kɛ foroko filimu finman ye min bɛ se ka wuli. A dabɔra ka sanubɔlanw , dingɛw ani pakew basigilenw dilan.
Materiel structure standard ye mun ye?
Jateminɛ kɛcogo jɔnjɔn bɛ baara kɛ ni APET substrat ye min bɛ LDPE sigicogo 50 μm ɲɔgɔn bɔ. Baro bɛ se ka kɛ sigida minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.
Total thickness jumɛnw bɛ sɔrɔ?
HSQY ka sariya hakɛ min bɛ nin fura in na, o bɛ se milimɛtɛrɛ 0,23 fo milimɛtɛrɛ 0,58 ma. Jagokɛyɔrɔ wɛrɛw bɛ Kɛ ni u dilanni dafalen ye.
Mun na a ka ca a la PE layini bɛ 50 μm lamini?
50 μm PE layɛrɛ bɛ balansi nafama di funteni-datugu baarakɛcogo la, ji-kɛlɛli ani fɛn dilanni kɛcogo la dumuni-pake baara caman na.
Yala PE janya bɛ se ka kɛ ka kɛɲɛ ni mɔgɔw sago ye wa?
Awɔ. PE girinya ni a dilanni bɛ se ka lajɛ ka kɛɲɛ ni sigilan fanga ye, a ɲɛkisɛw kɛcogo, a datugucogo ni filimu bɛ bɛn ɲɔgɔn ma ani a komandi hakɛ.
PE sigili fan ye fan jumɛn ye?
PE fan ye yɔrɔ ye min dilannen don walasa ka maga lidding-film sealant la min bɛ bɛn a ma. Rollo ka kan ka sɛbɛn walasa ka PE fan ni a jiginni sira dɔn.
Yala PET/PE filimu bɛ se ka kɛ thermoformé ye wa?
Awɔ. PET/PE filimu dabɔra ka kɛ vacuum dilanni ye, ka degun dilan ani ka thermoform-fill-seal pakew kɛ ni a jɔcogo ni a sumacogo bɛ bɛn ɲɔgɔn ma ka ɲɛ.
Formulaire-fill-seal pakew ye mun ye?
Form-fill-seal ye otomatiki ye min kɔnɔ duguma web bɛ dilan ka kɛ dingɛw ye, ka fa ni fɛn dilannen ye ka siri ni sanfɛla filimu ye o fɛn dilanni sira kelen kan.
Dumuni jumɛnw bɛ se ka pake PET/PE filimu kɔnɔ?
A kɛcogo minnu bɛ kɛ, olu ye sogo, kɔnɔ, jɛgɛ, kɔgɔjilafɛnw, foromazi, nɔnɔmafɛnw, pasta kura, dumuni labɛnnenw ani fɛn nɛnɛmanw walima fɛn minnu sumana.
Yala PET/PE bɛnnen don dumuni tulumaw ni asidilamaw ma wa?
Dumuni ni ɲɔgɔn cɛ hakɛ bɛnnen bɛ se ka kɛ dumuni tulumaw walima asidilamaw la ni a dɛmɛna ni jiginni ni sariya labatoli sɛgɛsɛgɛli ɲuman ye min bɛ kɛ ka taa sugu la.
Yala PET/PE filimu bɛ se ka kɛ dumuni sumalenw na wa?
Karamɔgɔ sugandilenw bɛ se ka kɛ ka u mara nɛnɛ na, funteni dɔgɔyalen kɔfɛ, u datugulen fanga ani u foroko dafalen sɛgɛsɛgɛra ni fɛn yɛrɛ ye.
Yala PET/PE filimu bɛ se ka kɛ mikro kɔnɔ wa?
Standard A PET/PE filimu man kan ka jate a yɛrɛma ko a tɛ se ka kɛ mikrowɛn na. Micro-onde (mikɔrɔ-onde) jɔcogo min sɛgɛsɛgɛra a danma, o ka kan ka sugandi yɔrɔ minnu na a mago bɛ a la.
Yala PET/PE filimu bɛ se ka kɛ foroko kɔrɔlen kɔnɔ wa?
Standard A PET/PE filimu tɛ sugandi cogoya la ka kɛɲɛ ni foroko kɔrɔlenw ye. CPET bɛnnen don kosɛbɛ foroko dumuni dafalenw ma sanubɔlanw .
Yala PET/PE filimu ye fɛn ye min bɛ oksizɛni caman bali wa?
Standard PET/PE tɛ jate cogoya la i n’a fɔ oksizɛni caman barikalan jɔcogo kɛrɛnkɛrɛnnen. PET/EVOH/PE ka kan ka jateminɛ ni oksizɛni tali dɔgɔyara kosɛbɛ.
Danfara jumɛn bɛ PET/PE ni PET/EVOH/PE cɛ ?
PET/PE bɛ gɛlɛya, kɛnɛya ani funteni sirili di. PET/EVOH/PE bɛ EVOH oksizɛni-barikalan kɛrɛnkɛrɛnnen dɔ fara oksizɛni-sɔrɔ-fɛnw kan ani minnu bɛ mɛn.
Yala PET/PE bɛ se ka kɛ MAP pakew dilanni na wa?
A bɛ se ka kɛ MAP baara sugandilenw na, nka OTR wajibiyalenw, gazi marali, datugulan filimu ani fɛn dilannenw marali waati ka kan ka sɛgɛsɛgɛ. Barrikanba MAP ka teli ka EVOH sigicogo de wajibiya.
Weld-seal PET/PE filimu ye mun ye?
Weld-seal material dilannen don walasa ka jɛɲɔgɔnya barikama kɛ, min bɛ to senna kosɛbɛ ni sanfɛla filimu ye min bɛ bɛn.
Filimu min bɛ se ka bɔ PET/PE , o ye mun ye?
Fɛn min bɛ se ka bɔ, o dilannen don walasa ka pake dafalen di ka sɔrɔ ka a to feerekɛlaw ka sanfɛla filimu bɔ ni da wuli fanga ye min bɛ kɔrɔsi.
Baara bɛ se ka kɛ ni finimugu jumɛn ye min bɛ kɛ ka fɛnw datugu?
Datugulan filimu ka kan ka kɛ ni sigilan ye min bɛ bɛn PET/PE duguma web ma. Filimu minnu bɛ bɔ nɔgɔya la, minnu bɛ sisi kɛlɛ, minnu barika ka bon ani minnu bɛ MAP sanfɛ, olu bɛ se ka jateminɛ.
Yala anti-fog PET/PE filimu bɛ sɔrɔ wa?
Baro bɛ se ka kɛ sisi kɛlɛlanw walima faralifɛnw kan minnu bɛ kɛ ka foroko nɛnɛmaw kɛ. Baara kɛcogo bɛ bɔ funteni, nɛnɛ, dumuni nɔgɔ ani a mara waati la.
Yala fura minnu bɛ bloki ni silikoni kɛlɛ, olu bɛ sɔrɔ wa?
Awɔ. Anti-block masterbatch walima silicone furakɛli bɛ se ka kɛ walasa ka roll handling, denesting ani thermoforming-line baarakɛcogo ɲɛ.
Yala PET min bɛ segin ka kɛ fɛn wɛrɛ ye, o bɛ se ka kɛ wa?
RPET -min kɔnɔ sigidaw bɛ se ka sɔrɔ. Recycled-content hakɛ bɛ bɔ dumuni ni ɲɔgɔn cɛ sariyaw la, jɛya, masinw ka baarakɛcogo ani kiliyanw ka ɲininiw.
Yala PET/PE filimu lamininen bɛ se ka segin ka kɛ fɛn wɛrɛ ye wa?
PET/PE ye fɛn caman sigicogo ye. Segin-ka-bɔnye sɔnni bɛ bɔ a dilanni na, PE hakɛ, laminiko siratigɛ la ani sigida PET -segin-ka-bɔnye infɔrɔmasiko la.
Core size jumɛnw bɛ sɔrɔ?
Sugandili jɔnjɔnw ye 3-inch ani 6-inch cores ye. Core material, kogo janya ani a bonya ka kan ka bɛn rollo girinya ni masin ma.
Yala rollo bonya ni a cɛmancɛ bɛ se ka kɛ ka kɛɲɛ ni i yɛrɛ sago ye wa?
Awɔ. Rollo bonya, a cɛmancɛ, a girinya ani a wulicogo bɛ se ka kɛ ka kɛɲɛ ni thermoforming walima FFS masin ye.
MOQ ye mun ye?
MOQ sariyalen min bɛ ɲɛfɔli dafalen kɔnɔ, o bɛ kilo 1000 ɲɔgɔn bɔ. Jagokɛyɔrɔw, kulɛriw ani finiw minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka hakɛ wɛrɛ de wajibiya.
Yala misaliw bɛ sɔrɔ wa?
A4 sɛbɛnfura min bɛ kɛ s walima rollo misali danmadɔw bɛ se ka sɔrɔ walasa ka dilan, ka datugu, ka jɛya ani ka barika jateminɛ. A ka c’a la, doni bɛ sara sannikɛla fɛ.
A dilanni ɲɛminɛ waati ye mun ye?
A dilanni cogoya bɛ tile 10-14 ɲɔgɔn ta, a ɲɛfɔli, a hakɛ, a foroko ani a sarali dafalen kɔfɛ.
Kunnafoni jumɛnw de ka kan ka kɛ walasa ka quotation sɔrɔ?
Aw bɛ a janya bɛɛ lajɛlen di, PET ani PE layɛrɛw, rollo bonya, a kɔnɔna, a cɛmancɛ, a fɛn dilannen suguya, a datugucogo, a datugucogo filimu, a barika wajibiyalen, a hakɛ ani a taayɔrɔ.
Aw ye Custom PET/PE Film Quote sɔrɔ
