Deŋgɔ PET / PE Laminated na Thermoforming Kple Nuɖuɖu Packaging

PET/PE Laminated Dzoxɔxɔ ƒe Film Video

Kpɔ video si le ete be nàsrɔ̃ nu geɖe tso HSQY PET/PE laminated thermoforming film, agbalẽ xatsaxatsa ƒe nɔnɔmewo, nusiwo wotsɔ wɔe ƒe wɔwɔme kple nuɖuɖu-babla ƒe dɔwɔwɔwo ŋu.

Nukae Nye PET/PE Laminated Thermoforming Film?

PET/PE laminated film nye multilayer sesẽ babla nu si ƒoa amorphous polyethylene terephthalate substrate kple polyethylene nutrenu ƒuƒoƒo. Wogaɖɔe be APET / PE film, PET laminated PE agbalẽ, PET / PE ete web alo PET / PE thermoforming rollstock.

APET ƒe ƒuƒoƒoa naa nukpɔkpɔ, sesẽ, ŋusẽkpɔɖeamedzi tsitretsitsi kple dzoxɔxɔ ƒe dɔwɔwɔ. PE layer la wɔa dzoxɔxɔ-trea anyigba eye wònaa tsitretsitsi ɖe tsidzadza, tsiwo kple package leakage ŋu nyona ɖe edzi.

HSQY naa PET/PE laminated film si me kɔ kple dzidzenu bliboa ƒe titrime ƒe didime si ade 0.23 mm va ɖo 0.58 mm. Dɔwɔnu si woɖo ɖi la zãa APET substrate si wotsɔ LDPE ƒe nutrenu si ade 50 μm laminated.

Wotsɔa nuawo naa le agbalẽ xatsaxatsa siwo ƒe kekeme, agbalẽ xatsaxatsa ƒe didime kple ʋuʋudedi ƒe nɔnɔme siwo wowɔ ɖe ɖoɖo nu me. Tiatia siwo wozãna ɖaa le pepa-nutowo me dometɔ aɖewoe nye nu vevi siwo ƒe didime nye inch 3 kple inch 6 hena ɖekawɔwɔ kple thermoforming kple form-fill-seal packaging equipment.

Wozãa PET/PE thermoforming film zi geɖe na lã fafɛ kple tsikpe, tɔmelã, ƒumelã, cheese, nyinotsibabla, pasta yeye, nuɖuɖu siwo woɖa kple nu bubu siwo hiã na agba sesẽ si me kɔ si me dzoxɔxɔ ƒe nutrenu si ŋu kakaɖedzi le.

Woate ŋu ato weld-seal kple peelable xɔtuɖoɖowo vɛ le lidding film, tray-sealing dɔwɔnuwo, nudzraɖoƒe ƒe nɔnɔmewo kple ʋuʋu ŋusẽ si hiã nu.

Mele be woaɖɔ PET/PE film si wozãna ɖaa le eɖokui si be enye nusi me oxygen sɔ gbɔ ɖo o. Dɔwɔwɔ siwo bia be woanɔ anyi didi alo oxygen ƒe kaka si mebɔ kura o ate ŋu abia PET/EVOH/PE alo mɔxenu gã bubu si wodo kpɔ.

Bia PET/PE Film ƒe Asixɔxɔ    Bia Nuwo ƒe Kpɔɖeŋuwo

PET/PE Laminated Film Nɔnɔmetatawo

PET/PE Laminated Film Mɔ̃ɖaŋununya Ŋuti Nyatakaka gbalẽvi

Wɔ nyatakaka gbalẽvi si li la ƒe kɔpi hena numekuku gbãtɔ. Ele be nuƒlelawo naɖo kpe edzi be nuŋlɔɖia ku ɖe eƒe titrime tututu, PE-layer specification, sealing grade kple production batch si wobia la ŋu.

Wɔ PET/PE Laminated Film Nyatakakagbalẽvi ƒe kɔpi

PET/PE Laminated Film ƒe Nɔnɔmewo

Ele be woaɖo kpe titrime mamlɛtɔ ƒe mɔɖeɖe, agbalẽ xatsaxatsa ƒe kekeme, fli ƒe mɔfiame, agbalẽ xatsaxatsa ƒe didime, nuto, PE-layer ƒe nɔnɔme, nutrenu ƒe ŋusẽ kple nuɖuɖu-kadodo ƒe nudidiwo dzi to kpɔɖeŋu si dzi woda asi ɖo kple adzɔnu ƒe nɔnɔme si woŋlɔ ɖi dzi.

PET / PE Laminated Film Layer Dɔwɔɖoɖo

Nukatae Woatsɔ APET aƒo ƒu kple PE Sealing Layer?

PET Naa Rigidity kple Product Visibility

APET naa xɔtuɖoɖo ƒe sesẽ si hiã be woatsɔ awɔ agbawo kple nugoewo esime wòléa nusiwo wowɔ la ƒe dzedzeme me ɖe asi. Edoa alɔ lãɖeɖe dzadzɛ kple didime ƒe liƒo hã le nuɖuɖu fafɛ ƒe bablawo me.

PE Wɔa Anyigba si Woate Ŋu Atre Dzoxɔxɔ Nu

APET si wozãna ɖaa menaa dzoxɔxɔ ƒe nutrenu ƒe nuwɔna tẽ abe PE nutrenu ƒe ƒuƒoƒo si wowɔ ɖe taɖodzinu aɖe ta ene o. Woate ŋu atsɔ PE ƒe akpaa asɔ kple film siwo le etame siwo sɔ be woawɔ weld si le dedie alo peel si dzi wokpɔna.

PE Naa Tsitsetse Kple Tsi ƒe Tsitretsitsi nyona ɖe edzi

PE ƒe ƒuƒoƒoa nana tsi ƒe dzoxɔxɔ, lã detsiƒonuwo, tsi fafɛ, ami kple tsi bubu siwo wokpɔna zi geɖe le nuɖuɖu fafɛwo ƒe agbawo me ƒe tsitretsitsi nyona ɖe edzi.

Dɔwɔnu Siwo Woƒo Ƒu la Doa Alɔ Nubablɛ Siwo Wowɔna Le Wo Ðokui Si

Woate ŋu awɔ PET/PE rollstock, akɔ wo me ahatre wo nu ɖe ​​fli siwo wowɔna le wo ɖokui si siwo sɔ dzi, si aɖe tray ƒe dɔwɔwɔ ɖe vovo dzi akpɔtɔ eye wòado alɔ nuɖuɖu-babla wɔwɔ atraɖii.

PET/PE tsɔ wu APET kple PET/EVOH/PE

PET/PE Laminated Film ƒe Nɔnɔme Veviwo

Gɔmedzedze Kɔkɔe kple Gloss

APET ƒe ƒuƒoƒoa naa nusiwo wowɔ la dzena nyuie eye asitsaƒe ƒe dzedzeme si le keklẽm na lã, ƒumelãwo, cheese, nuɖuɖu siwo woɖa kple nusiwo wofa fafɛ bubuwo.

Thermoforming Dɔwɔwɔ si Ŋu Kakaɖedzi Le

Woate ŋu awɔ PET/PE film si wogblɔ nyuie la le vacuum me alo woawɔ nyaƒoɖeamenu wòazu tray siwo ƒe dzogoewo, flanges kple cavity goglome siwo woɖe fia.

Dzoxɔxɔ-Sealable PE Anyigba

Woate ŋu atrɔ asi le LDPE ƒe ƒuƒoƒoa ŋu na weld nutrenu sesẽwo alo nutrenu siwo dzi woate ŋu aŋe le siwo dzi woate ŋu aɖu kple nutsyɔnu film siwo sɔ.

Tsidzadza Kple Tsi ƒe Tsitretsitsi

PE ƒe nutrenu ƒe ƒuƒoƒoa kpena ɖe ame ŋu be wòakpɔ nusi wotsɔ blae la ta tso tsidzadza, nusiwo wowɔ ƒe detsiƒonuwo, tsi fafɛ kple tsi si le dodom le nudzraɖoƒe le fafa alo tsikpe me.

Ŋusẽkpɔɖeamedzi kple Puncture ƒe Dɔwɔwɔ

APET naa sesẽnuwɔwɔ ŋutɔŋutɔ na tray siwo wowɔ, ʋuɖoɖo kple asitsatsa ƒe dɔwɔwɔ. Ele be woazã atike ŋutɔŋutɔ atsɔ ada ƒu ɖaɖɛwo, nugbɔ siwo xɔ dzo kple dzogoe siwo me goglo la akpɔ.

Weld-Seal kple Peelable Tiatiawɔblɔɖe

Woate ŋu atia PE-tike vovovowo na gaƒoɖokui ƒe nutrenu siwo nɔa anyi ɖaa alo nuƒlelawo ƒe ʋuʋudedi ƒe ʋuʋu.

FFS Line ƒe Ðekawɔwɔ

Wotrɔ asi le agbalẽ xatsaxatsa ƒe kekeme, nu veviwo, ʋuʋudedi ƒe mɔfiame kple agbalẽ xatsaxatsa ƒe didime ŋu ate ŋu ado alɔ thermoform-fill-seal packaging lines.

Dɔwɔwɔ ƒe Atikewɔwɔ Siwo Wowɔ Ðe Ðoɖo Nu

Woate ŋu aƒo nu tso anti-block, silicone, anti-fog, antistatic, tinted kple bubu siwo wozãna koŋ ƒe tiatia ŋu le dɔwɔwɔ kple babla ƒe nudidiwo nu.

Thermoforming kple FFS Dɔwɔwɔ ƒe Mɔfiamewo

Ðo kpe PE ƒe Akpa dzi Hafi Nàde agbalẽ xatsaxatsaa me

Ele be PE ƒe nutrenu ƒe anyigba nadze ŋgɔ mɔ nyuitɔ le agbalẽvi si wowɔ me. Ele be woaɖo kpe roll winding kple treated-side identification dzi hafi woawɔe.

Kpɔ Dzoxɔxɔ ƒe Nɔnɔmetata dzi

Ele be dzoxɔxɔ nana PET la nafa ale gbegbe be wòate ŋu awɔe dzoxɔxɔ si gbɔ eme, awɔ kristalo alo agblẽ nu le PE ƒe nutrenu ƒe ƒuƒoƒoa ŋu o.

Da Deep-Draw Gliwo Mama Kpɔ

Do goglowo, dzogoe ɖaɖɛwo kple draw ratio gãwo ate ŋu ana xɔtuɖoɖoa naɖiɖi. Ele be woalé ŋku ɖe tray si wowɔ la ŋu be gli ƒe titrime suetɔ kekeake, pinholes kple seal-flange li ke hã.

Kpɔ Flange ƒe Anyigba dzi

Ʋuʋudedi, wɔwɔme si mesɔ o, nuɖuɖu ƒe ɖiƒoƒo kple nusiwo wowɔ ƒe tsi siwo le flange la dzi ate ŋu aɖe nutrenu ƒe kakaɖedzi dzi akpɔtɔ.

Tsɔ Top Film kple Bottom Web la sɔ kple wo nɔewo

Ele be nutsyɔnu film ƒe nutrenu la nasɔ kple PE nutrenu ƒe ƒuƒoƒoa. Ele be woaɖo nutrenu ƒe dzoxɔxɔ, nyaƒoɖeamenu kple ɣeyiɣi si wòanɔ anyi to ewɔwɔ dodokpɔwo me.

Do Nubablɛ ƒe Dɔwɔna Bliboa kpɔ

Ele be mɔɖeɖe mamlɛtɔ nalɔ nuɖuɖu ŋutɔŋutɔ ƒe wɔwɔme, edede, nutrenu, fafa alo tsikpe, ʋuɖoɖo, edzadzraɖo, eʋuʋu kple eƒe agbenɔƒe dodokpɔ kple nuɖuɖu ŋutɔŋutɔ ɖe eme.

Weld-Seal vs. PET / PE Film si woate ŋu aŋe

PET/PE Film ƒe Nutrenu ƒe Nɔnɔmewo

Seal ƒe dɔwɔwɔ nɔ te ɖe PE ƒe wɔwɔme, lidding-film sealant, tray-flange nɔnɔme kple packaging-machine ƒe ɖoɖowo dzi.

• Nutrenu ƒe dzoxɔxɔ.

• Nutrenu ƒe nyaƒoɖeamenu.

• Ɣeyiɣi si nànɔ anyi.

• Dɔwɔnu ƒe dzoxɔxɔ ƒe ɖekawɔwɔ.

• PE-layer ƒe titrime kple atikeŋutinunya.

• Lidding-film ƒe nutrenu ƒe wɔwɔme.

• Nusiwo wowɔ ƒe ɖiƒoƒo le flange la dzi.

• Nɔnɔme siwo me wodzraa nu ɖo le fafa alo tsikpe me.

• Weld alo peel ƒe ŋusẽ si hiã.

Dodokpɔ siwo wokafu dometɔ aɖewoe nye nutrenu ƒe ŋusẽ dzidzedze, amadede ƒe gege ɖe eme dodokpɔ, vacuum leak dodokpɔ, gbagbã dodokpɔ, ʋuɖoɖo ƒe nɔnɔmetata kple adzɔnu tɔxɛwo ƒe agbenɔƒe dodokpɔ.

PET/PE Laminated Film ƒe dɔwɔwɔ

Lã Yeyewo ƒe Nubablɛwo

Woateŋu awɔ PET/PE film wòazu agba siwo me kɔ kple ete ƒe lãgbalẽwo na nyilã, haƒoƒo, alẽlã, koklolã kple lã siwo ŋu wotrɔ asi le siwo hiã be woatsɔ dzoxɔxɔ atre wo nu.

Tɔmelãwo Kple Ƒumelãwo ƒe Nubablɛwo

Tsi ƒe tsitretsitsi kple nutrenu ƒe blibonyenye na xɔtuɖoɖoa sɔ na tɔmelã fafɛ tiatia aɖewo, ƒumelãwo kple marinated-product zazã.

Cheese Kple Notsi ƒe Nubablɛwo

Woateŋu azã PET/PE rollstock na cheese ƒe akpawo, cheese si wofli, nyinotsi me numeɖenuwo kple nu bubu siwo wotsɔ de fridzi ne woɖo kpe oxygen mɔxenu kple nutrenu ƒe ŋusẽ si hiã dzi.

Pasta Yeyewo ƒe Nubablɛwo

PET/PE ƒe agba siwo wowɔ ate ŋu ado alɔ pasta yeye, dumplings kple amɔwɔnu siwo wotsɔ de fridzi me siwo hiã be woaɖee afia eme nakɔ eye woadzra wo ɖo ɖe nutrenu nu.

Nuɖuɖu Siwo Wodzra Ðo Ðe Fafa Me

Woate ŋu azã nusi wotsɔ wɔe la na sabala, nuɖuɖu fafɛwo, nuɖuɖu ƒe akpa aɖewo kple nu bubu siwo wofa fafɛ siwo woate ŋu aɖu xoxo siwo mehiã be woawɔ dɔ le dzodoƒe si wozãna ɖaa o.

Nuɖuɖu Siwo Wobla Ðe Tsi Me

Woate ŋu ada PET/PE ƒe dzesi siwo sɔ kpɔ hena nudzraɖoƒe si wotu ɖe tsikpe me. Ele be woado dzoxɔxɔ si bɔbɔ ƒe ŋusẽkpɔɖeamedzi, nutrenu ƒe blibonyenye kple nubablɛ ƒe gbagbã kpɔ kple nusi wowɔ ŋutɔŋutɔ.

Atikewo Kple Atikewɔwɔ Ŋuti Nubablɛwo

Atikewɔwɔ alo atikewɔnyawo zazã bia be woatsɔ dzeside si dze ɖe vovo, ewɔwɔ ƒe nɔnɔme siwo dzi wokpɔna, nutrenu ƒe kpeɖodzi kple sedede ŋuti nuŋlɔɖi siwo ku ɖe dɔwɔwɔ koŋ ŋu.

Mɔxenu ƒe Dɔwɔwɔ Kple Eƒe Agbenɔƒe Ŋu Bubu

Mele be woaɖɔ PET/PE ƒe bablawo be oxygen, gas alo tsi ƒe dzoxɔxɔ ƒe mɔxenu si woɖo ɖi le wo me ne womedzidze nyatakaka siwo ku ɖe nusiwo wotsɔ wɔe ƒe wɔwɔme tututu kple woƒe titrime ŋu o.

Oxygen ƒe kaka ƒe agbɔsɔsɔme kple tsi-yaƒoƒo ƒe kaka ƒe agbɔsɔsɔme nɔ te ɖe eƒe titrime bliboa, PET ƒe hatsotso, PE ƒe titrime, lamination ƒe nyonyome, dzoxɔxɔ, fafa kple dodokpɔ mɔnu dzi.

Wotiaa PET/PE si wozãna ɖaa koŋ na dzoxɔxɔ ƒe wɔwɔme si me kɔ kple dzoxɔxɔ ƒe nutrenu. Ate ŋu ana ametakpɔnu si sɔ na nuɖuɖu geɖe siwo wofa, gake menye nusi woatsɔ aɖo EVOH alo xɔtunu bubu si me oxygen sɔ gbɔ ɖo si ŋu woɖo kpee teƒe o.

Nudzraɖoƒe ƒe agbenɔƒe nɔ te ɖe nusiwo womeɖa o ƒe nyonyome, dzadzɛnyenye, gas ƒe tsakatsaka, nutrenu ƒe blibonyenye, nudzraɖoƒe ƒe dzoxɔxɔ, ta ƒe teƒe, nutsyɔnu film kple mama ƒe nɔnɔmewo dzi. Nudzraɖoƒe ƒe agbenɔƒe ŋuti nya siwo wogblɔna bia be woado nuɖuɖua kpɔ kple nuɖuɖu ŋutɔŋutɔ.

Dzoxɔxɔ Kple Dzoxɔxɔ ƒe Seɖoƒewo

Wotrɔ asi le Standard APET / PE thermoforming film koŋ na ambient, fridzi kple tsikpe nuɖuɖu bablawo. Mele be woaɖɔe le eɖokui si be microwave mete ŋu le dedie alo le dzodoƒe si wozãna ɖaa me o.

Hot-fill ƒe nyonyo nɔ te ɖe PET ƒe dzesi tɔxɛ, PE layer, nusi wowɔ ƒe dzoxɔxɔ, ɣeyiɣi didi si wotsɔ yɔe kple package support dzi. Ele be woatsɔ mɔ̃ɖaŋununya ŋuti nyatakaka siwo ku ɖe klass tɔxɛwo ŋu aɖo kpe dzoxɔxɔ ƒe nɔnɔme si sɔ gbɔ wu dzi.

Le nuɖuɖu siwo woate ŋu atsɔ awɔ microwave alo esiwo wozãna le dzodoƒe si wozãna ɖaa gome la, bu PP alo CPET ƒe wɔwɔme si wozãna koŋ ŋu tsɔ wu be nàsusui be APET/PE si wozãna ɖaa la anɔ anyi le didime nu.

Nuɖuɖu-Kadodo Kple Ðoɖowɔwɔ ƒe Nudidiwo

Nuɖuɖu-kadodo ƒe dzedzeme nɔ te ɖe PET resin tututu, nusiwo wogbugbɔ zã, PE nutrenu ƒuƒoƒo, kaƒoƒo ƒuƒoƒo, dɔwɔwɔ ƒe kpekpeɖeŋunuwo, anyigba dzi dɔwɔwɔ kple ewɔwɔ ƒe nɔnɔmewo dzi.

Ele be nuƒlelawo nana asi si me woayi, nuɖuɖu ƒomevi, dzoxɔxɔ si wodzrana ɖo, ɣeyiɣi didi si woatsɔ aƒoe, ami alo aɖi si le eme, tsikpe ƒe nɔnɔmewo kple alesi woɖoe be woatsɔe ayɔe.

SGS dodokpɔ ŋuti nyatakakawo ate ŋu ana adzɔnuwo dodokpɔ ŋuti nyatakaka siwo ŋu viɖe le, gake ele be nyatakakaa nasɔ kple nusiwo wotsɔ wɔe ƒe wɔwɔme tututu kple alesi woɖoe be woazãe.

ISO 9001 nye nyonyome-dzikpɔkpɔ-ɖoɖo ƒe dzidzenu eye mele be woazãe le eɖokui si abe kpeɖodzi be nuɖuɖu-kadodo ƒe sewo wɔ ɖeka o.

Gbugbɔgazã Kple Nusiwo Li Eteƒe Didi Ŋu Bubuwo

PET/PE nye nu geɖe ƒe wɔwɔme. Eƒe ɖekawɔwɔ kple PET gbugbɔgazã nɔ te ɖe PE ƒe agbɔsɔsɔme, laminate ƒe nɔnɔme, nusiwo wotsɔna léa nu ɖe ​​nu ŋu, ink, dzesidewo, nuɖuɖu ƒe ɖiƒoƒo kple nutoa me gbugbɔgazã ƒe xɔtuɖoɖowo dzi.

Mele be woagblɔ tso nusi wowɔ vɔ ŋu be woate ŋu azãe le xexeame katã alo woate ŋu azãe keŋkeŋ o negbe ɖe woda eƒe gbugbɔgazã ƒe dɔwɔwɔ kpɔ na asi si woɖo taɖodzinu na hafi.

RPET-si wotu ɖe xɔtuɖaŋu ƒe ƒuƒoƒo ate ŋu aɖe ɖetugbui leaƒe-PET zazã dzi akpɔtɔ, gake nusiwo wogbugbɔ zãna si ŋu woɖe mɔ ɖo la nɔ te ɖe nuɖuɖu ƒe kadodo ŋuti sewo, eme kɔ, mɔ̃wo ƒe dɔwɔwɔ kple asisiwo ƒe nudidiwo dzi.

Total gauge dzi ɖeɖe kpɔtɔ, forming mama ƒe nyonyo kple roll kple pallet loading ƒe nyonyome ate ŋu aɖe nuwo kple ʋuɖoɖo ƒe ŋusẽkpɔɖeamedziwo dzi akpɔtɔ evɔ womagblɔ nya siwo ŋu womeda asi ɖo o be woate ŋu azã wo ake o.

Dodokpɔ Siwo Wokafu be Woawɔ le Nusiwo Wozã Kple Nubablɛwo Ŋu

• Total titrime kple ɖekaɖeka layer titrime.

• Roll kekeme, roll diameter, core didime kple winding mɔfiame.

• Nusiwo me kɔ, aŋɔ, keklẽ kple ɖiƒoƒo siwo woate ŋu akpɔ.

• Lamination kadodo kple delamination tsitretsitsi.

• Coefficient ƒe friction kple roll-unwinding dɔwɔwɔ.

• Dzoxɔxɔ ƒe dzoxɔxɔ kple fesre si le wɔwɔm.

• Gli-titrime mama le ewɔwɔ vɔ megbe.

• Flange gbadzaa kple nutrenu-anyigba ƒe nɔnɔme.

• Nutrenu gɔmedzedze, nutrenu ƒe ŋusẽ kple peel dɔwɔwɔ.

• Leak, burst kple ʋuɖoɖo ƒe tsitretsitsi.

• Dzoxɔxɔ si bɔbɔ ƒe ŋusẽkpɔɖeamedzi kple tsikpe-nudzraɖoƒe ƒe dɔwɔwɔ.

• OTR kple WVTR afisi nudzraɖoƒe ƒe agbenɔƒe nɔ te ɖe mɔxenu ƒe dɔwɔwɔ dzi.

• Nuɖuɖu-kadodo ƒe ʋuʋu alo sedziwɔwɔ dodokpɔ hena wɔwɔme tututu.

• Nuɖuɖu ƒe agbenɔƒe dodokpɔ to nuɖuɖu kple nutsyɔnu ƒe film ŋutɔŋutɔ zazã me.

Trɔ asi le PET / PE Laminated Film Tiatiawɔblɔɖe

• Eƒe titrime katã tso abe milimeta 0.23 va ɖo milimeta 0.58 ene.

• Standard 50 μm PE nutrenu ƒuƒoƒo.

• PE ƒe titrime kple nutrenu ƒe atikewɔwɔ si wowɔ ɖe ɖoɖo nu.

• Ðetugbui leaƒe APET alo RPET-si le substrate.

• Amadede siwo me kɔ, siwo wotsɔ amadede vovovowo wɔe eye wotrɔ asi le wo ŋu.

• Weld-nutrenu, lock-nutrenu alo peelable grade.

• Anti-block, silicone-coated kple anti-fog tiatia.

• Custom roll kekeme kple slit kekeme.

• Pepa ƒe nu vevi siwo ƒe didime nye inch 3 alo inch 6.

• Wotrɔ asi le agbalẽ xatsaxatsa ƒe didime kple agbalẽ xatsaxatsa ƒe kpekpeme ŋu.

• PET/EVOH/PE ƒe xɔtuɖoɖo siwo me mɔxenu gãwo le.

• Nuŋlɔɖi siwo wowɔ ɖe ɖoɖo nu, kakɛwo kple pallet-bablawo.

Nyatakaka Siwo Hiã Na PET/PE Film Quotation

• Nusiwo wotsɔ wɔe ƒe titrime bliboa.

• PET kple PE ƒe ƒuƒoƒo ƒe titrime siwo hiã.

• Ðetugbi Nɔaƒe APET alo RPET-nudidi.

• Roll ƒe kekeme, roll ƒe didime kple core ƒe didime.

• Winding mɔfiame kple PE nutrenu akpa.

• Thermoforming-mɔ̃ ƒe kpɔɖeŋu kple wɔwɔ goglome.

• Nuɖuɖu ƒe nuwɔna, dzoxɔxɔ si wotsɔ yɔe kple nudzraɖoƒe ƒe nɔnɔmewo.

• Weld-nutrenu alo peelable ʋuʋu nudidi.

• Lidding-film wɔwɔme kple nutrenu-mɔ̃ parameters.

• OTR, WVTR alo MAP mɔxenu ƒe nudidiwo.

• Anti-fog, anti-block, silicone alo anyigbadzidɔ bubu.

• Nuɖuɖu-kadodo kple afisi woayi-asi ƒe nudidiwo.

• Dodokpɔ ƒe agbɔsɔsɔme, nudɔdɔ le agbɔsɔsɔ gã me kple ƒe sia ƒe ƒe didi.

• Nubablɛ, pallet, dzesidewo, melidzeƒe si woɖo tae kple ŋkeke si dzi woatsɔe vɛ.

Ðo Wò PET/PE Film Nudidiwo ɖa

Tiatia Siwo Ku Ðe Nubablɛwo Kple Wo Ðoɖo Ðe Wo Ŋu

Kpɔɖeŋu ƒe babla: Woate ŋu abla A4 agbalẽwo alo agbalẽ xatsaxatsa ƒe kpɔɖeŋu siwo seɖoƒe li na ɖe ametakpɔnu kotokuwo kple kakɛwo me.

Agbalẽ xatsaxatsawo ƒe babla: Agbalẽ xatsaxatsa siwo wozãna ɖaa ƒe kpekpeme anɔ abe kilogram 50 ene alo wowɔa wo ɖe ɖoɖo nu le nuƒlela ƒe mɔ̃ dzi agbatsɔtsɔ ƒe nudidiwo nu.

Roll takpɔkpɔ: Woate ŋu abla agbalẽ xatsaxatsawo kple PE film, nusi me tsi mate ŋu age ɖo o, ametakpɔnu nuwuƒe ƒe nutrenuwo kple gotagome nubablɛwo.

Pallet ƒe babla: Woateŋu atsɔ agba si ade kilogram 500-2000 ɖe plywood pallet dzi le agbalẽ xatsaxatsa ƒe kekeme, eƒe didime kple nudzraɖoƒe-dɔwɔwɔ ƒe nudidiwo nu.

Agbatsɔtsɔ: Agbatsɔtsɔ si bɔ la ade tɔn 20, le agbalẽ xatsaxatsa ƒe didime, pallet ƒe ɖoɖo kple nugoe ƒe kpekpeme ƒe mɔxexeɖenu nu.

Nusiwo woatsɔ aɖoe: EXW, FOB, CNF, CIF kple asitsatsa ƒe ɖoɖo bubu siwo dzi wolɔ̃ ɖo.

Ɣeyiɣi si wozãna zi geɖe: Anɔ abe ŋkeke 10-14 le gadede asi kple kpeɖodzi mamlɛtɔ si wotsɔ ɖo kpe edzi vɔ megbe.

Ðaseɖigbalẽwo Kple Dzedzeme Ŋuti Nuŋlɔɖiwo

Nuŋlɔɖi siwo li ate ŋu anye SGS ƒe adzɔnuwo dodokpɔ ŋuti nyatakakawo kple ISO dzikpɔkpɔ-ɖoɖo ƒe ɖaseɖigbalẽwo. Ele be woalé ŋku ɖe nuŋlɔɖi siwo hiã ŋu ne wotsɔe sɔ kple PET/PE ƒe wɔwɔme tututu, nusiwo wotsɔ wɔe, woƒe titrime kple alesi woɖoe be woazãe.

ISO ƒe nyonyomedzikpɔkpɔ ƒe ɖaseɖigbalẽ le eɖokui si meɖo kpe edzi be sinima aɖe wɔ ɖe nuɖuɖu ƒe kadodo, atikewo, atikewɔwɔ, microwave alo nusiwo wogbugbɔ zãna ƒe nudidiwo dzi o.

Nukatae Nàtia HSQY be wòanye Wò PET/PE Film Dɔwɔƒe?

HSQY Plastic Group naa PET, PET/PE, PET/EVOH/PE, PP, CPET kple thermoforming kple nuɖuɖu-babla nu bubuwo na nubablɛ trɔlawo, nuɖuɖuwɔlawo, mamalawo kple dukɔwo dome nuƒlelawo.

• PET/PE laminated film tso abe 0.23 mm va ɖo 0.58 mm.

• Standard abe 50 μm LDPE nutrenu ƒuƒoƒo.

• Weld-nutrenu kple peelable nu tiatia.

• Wotrɔ asi le kekeme, agbalẽ xatsaxatsa ƒe didime kple mɔfiame siwo wotsɔ ƒo xlãe ŋu.

• 3-inch kple 6-inch nu vevi tiatia.

• Virgin APET kple RPET-nu siwo le eme ƒe ɖoɖowo.

• PET/EVOH/PE ƒe mɔxenu gã ƒe mɔnu bubuwo.

• Anti-block, silicone kple anti-fog tiatia.

• Kpɔɖeŋuwo hena wɔwɔ, nutrenu kple eƒe agbenɔƒe ƒe dodokpɔ.

• Customized export packing kple bulk-nuwɔwɔ ƒe kpekpeɖeŋu.

HSQY kafui be woado film si wotia la kpɔ le nuƒlela ƒe dɔwɔnu ŋutɔŋutɔ siwo wotsɔ wɔa film, yɔyɔ kple nutrenu dzi hafi da asi ɖe ewɔwɔ le agbɔsɔsɔ gã me dzi.

Te ɖe HSQY ŋu hena Kpɔɖeŋuwo kple Asixɔxɔ

HSQY Xexeame Katã ƒe Adzɔnuɖefia

HSQY Plastic Group tsɔa thermoforming sheets, laminated packaging films, nuɖuɖu trays kple sealing solutions fiana le dukɔwo dome plastics kple packaging ɖeɖefiawo me.

Nya Siwo Wobiaa Enuenu Tso PET/PE Laminated Film Ŋu

Nukae nye PET/PE laminated film?

PET / PE laminated film ƒoa APET xɔtuɖaŋu ƒe ƒuƒoƒo sesẽ aɖe kple polyethylene dzoxɔxɔ-nutrenu ƒuƒoƒo hena dzoxɔxɔ ƒe nɔnɔme kple nɔnɔme-yɔyɔ-nutrenu ƒe bablawo.

Nukae APET/PE fia?

APET gɔmee nye polyethylene terephthalate si me nɔnɔme mele o, gake PE gɔmee nye polyethylene. APET nana wòsẽna eye wòkɔna, eye PE naa anyigba si woate ŋu atre dzoxɔxɔ nu.

Ðe PET/PE film sɔ kple laminate si te ŋu trɔna bɔbɔea?

Adzɔnu sia nye thermoforming bottom web si sesẽ alo afã sesẽ tsɔ wu be wòanye kotoku me film tsɛ si te ŋu trɔna bɔbɔe. Wotrɔ asi le eŋu be wòawɔ traywo, dowo kple nubablɛ sesẽwo ƒe gɔmeɖoanyiwo.

Nukae nye nuwo ƒe wɔwɔme si wozãna ɖaa?

Dɔwɔnu si woɖo ɖi la zãa APET substrate si me LDPE ƒe nutrenu si ade 50 μm le. Woate ŋu adzro xɔtuɖoɖo siwo wowɔ ɖe ɖoɖo nu me.

Titrime bliboa kawoe li?

HSQY ƒe dzidzenu ƒe didime na atike sia anɔ abe 0.23 mm va ɖo 0.58 mm. Woɖo kpe xɔtuɖoɖo bubuwo dzi be wowɔ wo.

Nukatae zi geɖe la, PE ƒe ƒuƒoƒoa nɔa abe 50 μm ene?

50 μm PE ƒuƒoƒo naa dzoxɔxɔ-nutrenu ƒe dɔwɔwɔ, tsi ƒe tsitretsitsi kple wɔwɔme ƒe nuwɔna ƒe dadasɔ ŋutɔŋutɔ na nuɖuɖu-babla ƒe dɔwɔwɔ geɖe.

Ðe woate ŋu atrɔ asi le PE ƒe titrime ŋua?

Ɛ̃. Woate ŋu alé ŋku ɖe PE ƒe titrime kple eƒe wɔwɔme ŋu le nutrenu ƒe ŋusẽ, lãgbalẽ ƒe dɔwɔwɔ, nutsyɔnu-film ƒe sɔsɔ kple nudɔdɔ ƒe agbɔsɔsɔ nu.

Akpa kae nye PE ƒe nutrenu ƒe akpa?

PE ƒe akpaae nye anyigba si wowɔ be wòate ɖe nutrenu si sɔ kple nutsyɔnu-film ŋu. Ele be woade dzesi agbalẽ xatsaxatsaa be wòade dzesi PE ƒe akpa kple afisi wòle be wòaƒoe ɖo.

Ðe woate ŋu awɔ PET/PE film si me dzoxɔxɔ lea?

Ɛ̃. Wotrɔ asi le PET/PE film ŋu na vacuum wɔwɔ, nyaƒoɖeamenu wɔwɔ kple thermoform-fill-seal packaging ne xɔtuɖoɖo kple dzoxɔxɔ ƒe ɖoɖoa sɔ nyuie.

Nukae nye agbalẽviwo ƒe nutrenu si wotsɔ yɔa agbalẽ me?

Form-fill-seal nye nusi wowɔna le wo ɖokui si si me wowɔa ete web la wòzua dowo, wotsɔa nusi wowɔ yɔa wo me eye wotsɔa film si le etame xea nu le ewɔwɔ ƒe mɔnu ma ke dzi.

Nuɖuɖu kawoe woate ŋu abla ɖe PET/PE film me?

Nusiwo wozãna zi geɖee nye lã, koklolã, tɔmelã, ƒumelã, cheese, nyinotsibabla, pasta yeye, nuɖuɖu siwo woɖa kple nusiwo wofa alo esiwo wofa tsikpe me.

Ðe PET/PE sɔ na nuɖuɖu siwo me ami le kple esiwo me aɖi lea?

Woate ŋu azã nuɖuɖu ƒe kadodo ƒe dzesi si sɔ na nuɖuɖu siwo me ami le alo esiwo me aɖi le ne wodo alɔe to ʋuʋu kple sedziwɔwɔ dodokpɔ nyuitɔ na asi si me woayi.

Ðe woate ŋu azã PET/PE film na nuɖuɖu siwo wofa tsikpe mea?

Woateŋu azã dzesi tiatia aɖewo hena nudzraɖoƒe si wotu ɖe tsikpe me le dzoxɔxɔ si bɔbɔ ƒe ŋusẽkpɔɖeamedzi, nutrenu ƒe ŋusẽ kple nubablɛ ƒe blibonyenye dodokpɔ kple nusi wowɔ ŋutɔŋutɔ vɔ megbe.

Ðe woate ŋu azã PET/PE film le microwave mea?

Mele be woabu APET/PE film si wozãna ɖaa be ele microwave me o. Ele be woatia xɔtuɖoɖo si ŋu woda asi ɖo ɖe vovo si woate ŋu atsɔ awɔ microwave le afisi wòhiã le.

Ðe woate ŋu azã PET/PE film le dzodoƒe si wozãna ɖaa mea?

Zi geɖe la, wometiaa APET/PE film si wozãna ɖaa na nuɖaze si wozãna ɖaa o. CPET sɔ wu na nuɖuɖugoe siwo ŋu woda asi ɖo siwo woate ŋu atɔ dzoe.

Ðe PET/PE film nye nusi me oxygen sɔ gbɔ ɖoa?

Zi geɖe la, womebua PET/PE si wozãna ɖaa be enye xɔtuɖoɖo si woɖo ɖi si me oxygen sɔ gbɔ ɖo o. Ele be woada PET/EVOH/PE kpɔ ne ehiã be oxygen ƒe kaka si le sue ŋutɔ.

Vovototo kae le PET/PE kple PET/EVOH/PE dome?

PET/PE naa sesẽme, nukpɔkpɔ le gaglãgbe kple dzoxɔxɔ ƒe nutrenu. PET/EVOH/PE tsɔa EVOH ƒe oxygen-mɔxenu ƒe ƒuƒoƒo tɔxɛ aɖe kpena ɖe nusiwo ŋu oxygen sea nu gɔme le eye woƒe agbenɔƒe didi wu la ŋu.

Ðe woate ŋu azã PET/PE na MAP ƒe nubablɛwoa?

Woateŋu azãe na MAP dɔwɔwɔ tiatia aɖewo, gake ele be woado OTR si hiã, gas léle ɖe te, nutsyɔnu film kple nusi wowɔ ƒe agbenɔƒe ƒe agbenɔƒe kpɔ. Zi geɖe la, MAP si me mɔxenu gãwo le bia EVOH ƒe wɔwɔme.

Nukae nye weld-seal PET/PE film?

Wotrɔ asi le weld-seal material ŋu ​​be wòawɔ kadodo sesẽ aɖe si nɔa anyi ɖaa vie kple film si le etame si sɔ.

Nukae nye PET/PE film si woate ŋu aɖe ɖa?

Wotrɔ asi le nusiwo woate ŋu aŋe ŋu be wòana nubablɛa nade blibo esime wòɖea mɔ na nuƒlelawo be woatsɔ ŋusẽ si dzi wokpɔna aʋu film si le etame la ɖa.

Nutsyɔnu ƒe film kae woate ŋu azã?

Ele be nutrenu si sɔ kple PET/PE ƒe anyime web la nanɔ nutsyɔnu film la ŋu. Woate ŋu ada film siwo woɖena bɔbɔe, esiwo tsi tre ɖe afu ŋu, esiwo me mɔxenu gãwo le kple MAP tame ƒe filmwo kpɔ.

Ðe PET/PE film si tsi tre ɖe afu ŋu lia?

Woate ŋu aƒo nu tso nusiwo tsia afu nu alo nusiwo wotsɔ kpe ɖe eŋu ŋu hena nubablɛ siwo fa miamiamia. Dɔwɔwɔ nɔ te ɖe dzoxɔxɔ, fafa, nuɖuɖu ƒe tsidzadza kple ɣeyiɣi si woatsɔ adzrae ɖo dzi.

Ðe atike siwo tsia mɔxexeɖedɔléle nu kple silicone nu lia?

Ɛ̃. Woate ŋu azã anti-block masterbatch alo silicone atikewɔwɔ atsɔ ana agbalẽ xatsaxatsa ƒe dɔwɔwɔ, denesting kple thermoforming-line ƒe dɔwɔwɔ nanyo ɖe edzi.

Ðe woate ŋu azã PET si wogbugbɔ zãa?

Ðewohĩ xɔtunu siwo me RPET le la anɔ anyi. Nusiwo wogbugbɔ zã ƒe agbɔsɔsɔme nɔ te ɖe nuɖuɖu ƒe kadodo ŋuti sewo, eme kɔ, mɔ̃wo ƒe dɔwɔwɔ kple asisiwo ƒe nudidiwo dzi.

Ðe woate ŋu agbugbɔ PET/PE laminated film awɔ dɔa?

PET/PE nye nu geɖe ƒe wɔwɔme. Gbugbɔgazã ƒe lɔlɔ̃ ɖe edzi nɔ te ɖe eƒe nɔnɔme, PE ƒe agbɔsɔsɔme, lamination ɖoɖo kple nutoa me PET-gbugbɔgazã ƒe xɔtuɖoɖowo dzi.

Nu vevi kawo ƒe lolome li?

Tiatia siwo wozãna ɖaa dometɔ aɖewoe nye nu vevi siwo ƒe didime nye inch 3 kple inch 6. Ele be woatsɔ nu veviwo, gli ƒe titrime kple kekeme asɔ kple agbalẽ xatsaxatsaa ƒe kpekpeme kple mɔ̃a.

Ðe woate ŋu atrɔ asi le agbalẽ xatsaxatsa ƒe kekeme kple eƒe didime ŋua?

Ɛ̃. Woate ŋu atrɔ asi le agbalẽ xatsaxatsa ƒe kekeme, eƒe didime, eƒe kpekpeme kple eƒe ʋuʋu ƒe mɔfiame ŋu le thermoforming alo FFS mɔ̃a nu.

Nukae nye MOQ la?

MOQ si woɖo ɖi le nyatakaka tsitotsito me la ade kilogram 1,000. Nusiwo wowɔ ɖe ɖoɖo nu, amadedewo kple nusiwo woatsɔ atsyɔ wo dzi ate ŋu abia be woazã agbɔsɔsɔ bubu.

Ðe kpɔɖeŋuwo lia?

A4 agbalẽwo alo agbalẽ xatsaxatsa ƒe kpɔɖeŋu siwo seɖoƒe li na ate ŋu anɔ anyi hena wɔwɔ, nutrenu, eme kɔ nyuie kple mɔxenu ƒe dodokpɔ. Zi geɖe la, nuƒlelae xea agbatsɔtsɔ si woɖona ɖe amewo.

Nukae nye ɣeyiɣi si woatsɔ awɔe?

Nusiwo wowɔna zi geɖe xɔa abe ŋkeke 10-14 ene le esi woɖo kpe eƒe nɔnɔme, agbɔsɔsɔme, babla kple fexexe dzi vɔ megbe.

Nyatakaka kawoe hiã na nyayɔyɔ?

Na eƒe titrime bliboa, PET kple PE ƒuƒoƒo, agbalẽ xatsaxatsa ƒe kekeme, nuto, kekeme, nusi wowɔ ƒe ƒomevi, nutrenu mɔnu, nutsyɔnu film, mɔxenu ƒe nudidi, agbɔsɔsɔme kple teƒe si woayi.

Na PET / PE Film Quote si wowɔ ɖe ɖoɖo nu