Bɛst Plastik Shit fɔ Doa Kɔva – PVC, PETG Ɔ PC?

Yu de tink bɔt fɔ ɔpgrɛd yu domɔt dɛn? If yu pik di rayt tin fɔ rayt, dat kin mek big difrɛns.

Plastik sheet fɔ domɔt dɛn kin mek i te ɛn dɛn kin yuz am fɔ du bɔku tin, bɔt us kayn we bɛtɛ fɔ yu nid dɛn?

Insay dis post, wi go fɛn di bɛnifit dɛn we PVC, PETG, ɛn PC plastic sheet dɛn gɛt, we go ɛp yu fɔ disayd fɔ du sɔntin we yu no gud gud wan.

 

Ovaviu fɔ Plastik Shit Matirial dɛn

We i kam pan fɔ kɔba domɔt dɛn, pipul dɛn lɛk fɔ yuz plastic sheet dɛn. Dɛn kin gi dɛn tin dɛn we kin de fɔ lɔng tɛm, dɛn kin ebul fɔ du bɔku tin dɛn, ɛn dɛn kin mek pɔsin fayn. Bɔt us kayn plastic sheet dɛn kin yuz fɔ mek domɔt? Lɛ wi dayv insay tri pan di opshɔn dɛn we pipul dɛn lɛk pas ɔl: PVC, PETG, ɛn PC.

Us kayn Plastik Shit Dɛn kin Yuz Fɔ Doa?

1. PVC (Polivinil Klɔrayd) .

wan. Durable and Cost-effective: Dɛn sabi PVC fɔ in trɛnk ɛn fɔ pe fɔ am. Na go-to opshɔn fɔ bɔku os impruvmɛnt prɔjek dɛm.

b. Moisture Resistant: I de wok fayn na say dɛn we gɛt bɔku bɔku wata, we de mek i fayn fɔ yuz fɔ was ɛn kichin.

c. Difrɛn Difrɛn Fɔ Finish: Dɛn kin gɛt am wit transparent, frɔst, ɛn kɔlɔ opshɔn dɛn, PVC kin mach difrɛn dizayn stayl dɛn.

2. PETG (Glaykol-modifyed Polietilen Tɛriftalat) .

wan. High Clarity: PETG sheet dɛn klia lɛk kristal, we de mek pɔsin ebul fɔ si fayn fayn wan. Dis de mek dɛn fayn fɔ aplikeshɔn usay layt transmishɔn impɔtant.

b. Impact Resistant: Dɛn kin ebul fɔ bia wit impak pas bɔku ɔda tin dɛn, we kin mek dɛn fayn fɔ say dɛn we bɔku pipul dɛn kin pas.

c. Thermoformable: Dis min se dɛn kin shep dɛn izi wan we dɛn ɔt dɛn, we kin mek dɛn ebul fɔ mek dɛn kɔstɔm dizayn dɛn.

3. PC (Polikabɔnɛt) .

wan. Superior Impact Resistance: PC sheet dɛn rili tranga. Bɔku tɛm dɛn kin yuz dɛn na say dɛn we sef na di fɔs tin, lɛk skul ɛn pɔblik bildin dɛn.

b. UV Protection: Bɔku PC sheet dɛn kin kam wit UV coatings, we kin mek shɔ se dɛn stil klia ɛn strɔng ivin ɔnda san layt.

c. Dɛn layt: Pan ɔl we dɛn trɛnk, i izi fɔ ol ɛn instɔl.

Kwik Kɔmpiashɔn Tebul fɔ Plastik Shit Tayp dɛn

Tin dɛn	I kin te fɔ lɔng tɛm	Fɔ tɔk klia wan	Pe	Best For
PVC we dɛn kin yuz	Gud	Soba	Lo	Jɛnɛral yus, eria dɛn we kin gɛt mɔstɔ
PETG we dɛn kɔl PETG	Gud	Ay	Soba	Kastom dizayn, eria dɛn we trafik bɔku
PC	Wɛl dɔn	Ay	Ay	Sefty aplikeshɔn, yuz na do

Wetin Mek Wi fɔ Pik Plastik Sheet fɔ Doa?

Plastik sheet dɛn kin gi bɔku bɛnifit pas tradishɔnal tin dɛn lɛk wud ɔ glas. Dɛn nɔ kin at fɔ put dɛn, dɛn kin izi fɔ put dɛn, ɛn bɔku tɛm dɛn kin ebul fɔ bay dɛn. Apat frɔm dat, dɛn kin mek dɛn fɔ fit sɔm patikyula sayz ɛn stayl dɛn na di domɔt.

If yu gɛt di rayt plastic sheet fɔ yu domɔt, yu kin mek di wok we yu de du ɛn di fayn fayn tin dɛn go bifo. If yu lɛk di afɔdabiliti fɔ PVC, di klia we PETG gɛt, ɔ di trɛnk fɔ PC, wan pafɛkt opshɔn de fɔ ɛvri nid.

 

PVC Plastik Sheet fɔ Doa dɛn

Wetin na PVC?

PVC , ɔ Polyvinyl Chloride, na plastic we dɛn kin yuz bɔku bɔku wan ɛn dɛn sabi am fɔ di we aw i kin yuz bɔku tin dɛn. Na wan pan di tin dɛn we pipul dɛn lɛk fɔ yuz fɔ bil ɛn dizayn. PVC kin te, i layt, ɛn i nɔ kin gɛt wata, we mek i fayn fɔ yuz fɔ kɔba di domɔt.

Tayps of PVC Plastik Sheet fɔ Doa

1. Slaydin Doa Shit dɛn

wan. Di bɛnifit dɛn: Dɛn mek dɛn sheet ya fɔ mek i ebul fɔ slayv smol smol, ɛn i fayn fɔ say dɛn usay tradishɔnal domɔt dɛn kin tranga.

b. Kɔmɔn Aplikeshɔn: Dɛn kin yuz am na kloz, patio, ɛn rum divayd.

2. Transparent Doa Shit dɛn

wan. Yuz Kes: I fayn fɔ say dɛn we impɔtant fɔ si, lɛk shɔp ɔ ɔfis.

b. Di bɛnifit dɛn: Dɛn kin mek natura layt flɔ pan ɔl we dɛn de gi barɛri.

3. Frɔst Doa Shit dɛn

wan. Prayvesi Ficha dɛn: Dɛn sheet dɛn ya nɔ de mek pɔsin nɔ ebul fɔ si dɛn, ɛn dis de mek dɛn fayn fɔ batrum ɔ prayvet ɔfis dɛn.

b. Aesthetic Appeal: Dɛn de ad wan mɔdan tɔch to ɛni spɛs.

4. Kabinɛt Doa Shit dɛn

wan. Dɛn sheet ya kin te: Dɛn mek dɛn sheet ya fɔ bia fɔ yuz ɛvride, ɛn i izi fɔ klin ɛn mentenɛns.

b. Tin dɛn we yu fɔ tink bɔt aw fɔ mek di say dɛn we dɔn pwɛl: Dɛn nɔ kin gɛt skrach ɛn stɛyn, ɛn dis kin mek shɔ se dɛn luk fayn as tɛm de go.

Fɔnkshɔn ɛn Ficha dɛn fɔ PVC Plastik Shit dɛn

● I kin te: PVC sheet dɛn kin tranga ɛn dɛn kin ebul fɔ west ɛn te. Dɛn kin tinap tranga wan ɛn dɛn kin las fɔ lɔng lɔng tɛm.

● I layt: I izi fɔ handle ɛn instɔl, PVC sheet dɛn de mek di wok we dɛn de du fɔ mek di ples izi. Yu nɔ go strɛs fɔ es ɔ muv dɛn.

● Dɛn kin ebul fɔ chenj: Dɛn kin kɔt dɛn, shep dɛn, ɛn chenj dɛn fɔ difrɛn dizayn dɛn. Dis versatility alaw fɔ krietiv doa sɔlvishɔn.

● I nɔ go tek bɔku mɔni: We yu kɔmpia am to wud ɔ glas, bɔku tɛm, PVC kin izi fɔ bay. I de gi yu fayn fayn valyu fɔ yu mɔni.

● Moisture Resistance: PVC in resistance to moisture de mek i fayn fɔ ples we humid lɛk kichin ɛn batrum. I nɔ go wɔp ɔ pwɛl izi wan.

Kɔmɔn Aplikeshɔn fɔ PVC Plastik Shit dɛn

PVC sheet dɛn kin yuz fɔ difrɛn difrɛn tin dɛn we dɛn kin du na do, lɛk:

● Intɛriɔ Doa dɛn: I fayn fɔ rum dɛn we nid fɔ gɛt sɔlv we layt bɔt we go de fɔ lɔng tɛm.

● Doa dɛn we de na do: I fayn fɔ di say dɛn we di tin dɛn we de apin de, bikɔs dɛn nɔ de mek di wata wet.

● Kɔmishɔn Spays: Dɛn kin si am bɔku tɛm na rital ɛnvayrɔmɛnt usay i impɔtant fɔ si ɛn fɔ de te.

Kwik Rifrɛns Tebul fɔ PVC Shit Tayp dɛn

Tayp fɔ PVC Sheet	Advantej dɛn we pɔsin kin gɛt	Di Kɔmɔn Yuz dɛn
Slaydin Doa Shit dɛn	Smol opareshɔn, we de sev ples	Kloset, patio dɛn
Transparent Doa Shit dɛn	Di ay visibiliti we pɔsin kin si	Shop dɛn, ɔfis dɛn
Frosted Door Sheets we dɛn mek wit frɔst	Prayvet ɛn mɔdan luk	Bathrooms, prayvet ɔfis dɛn
Kabinɛt Doa Sheet dɛn	I kin te, i izi fɔ mek dɛn kia fɔ am	Kichin kabinet, ples fɔ kip tin dɛn

Wit ɔl dɛn tin ya, PVC plastic sheet na di tɔp choice fɔ doa kɔva, we de gi wan blend ɔf stayl ɛn funkshɔnaliti.

 

PETG Plastik Sheet fɔ Doa dɛn

Wetin na PETG?

PETG, ɔ Glycol-modified Polyethylene Terephthalate, na wan kayn tɛmplastik we de jɔyn di bɛst tin dɛn we PET ɛn ɔda plastic dɛn gɛt. Dɛn no am fɔ in klia ɛn taf, we mek pipul dɛn lɛk fɔ pik am fɔ difrɛn tin dɛn, ivin fɔ kɔba di domɔt.

Karakta dɛn fɔ PETG Plastik Shit dɛn

1. Di tin we dɛn kin yuz fɔ mek tɛm

wan. Dis min se PETG kin izi fɔ shep we dɛn ɔt am. I de alaw fɔ mek kɔstɔm dizayn ɛn spɛshal domɔt stayl dɛn.

b. Aplikeshɔn: I fayn fɔ mek spɛshal domɔt shep dɛn we fit sɔm patikyula akitɔkchral nid dɛn.

2. Ay Klari

wan. PETG sheet dɛn rili transparent, we de mek pɔsin si fayn fayn wan.

b. Impɔtant: Dis tin rili impɔtant na say dɛn usay layt transmishɔn de mek di ples fayn, lɛk di say dɛn we dɛn de sɛl tin dɛn ɛn di ɔfis dɛn.

3. Durable ɛn Impact-resistant

wan. Dɛn sheet ya kin ebul fɔ bia wit bɔku impak, we kin mek dɛn fayn fɔ say dɛn we bɔku pipul dɛn kin pas.

b. Pɔfɔmɛnshɔn: Dɛn nɔ kin krak ɛn brok, we kin mek shɔ se dɛn liv lɔng ivin na say dɛn we pipul dɛn kin bizi.

4. Kεmikכl Rεsistεns

wan. PETG nɔ de taya bɔku kemikal dɛn, we mek i fayn fɔ di say dɛn we dɛn de mek di industri.

b. I fayn: Dis prɔpati de alaw fɔ yuz am na laboratori ɛn manufakchurin fasiliti usay kɔmɔn tin fɔ de wit harsh tin dɛn.

5. Tɛmral Stebiliti

wan. PETG de mentɛn in intagriti akɔdin to wan rɛnj ɔf tɛmpracha.

b. Pɔfɔmɛnshɔn: Dis stebiliti de mek i bi wan rilibul chuk fɔ eria dɛn we de ɛkspiriɛns tɛmpracha chenj.

6. Risaykul we pɔsin kin yuz

wan. Wan opshɔn we nɔ de ambɔg di envayrɔmɛnt, dɛn kin risaykul PETG, we kin ridyus di impak we i gɛt pan di envayrɔmɛnt.

b. Benefit: We yu pik PETG, i de ɛp fɔ mek pipul dɛn kɔntinyu fɔ gɛt kɔnstrɔkshɔn ɛn dizayn.

Tiknɛs ɛn Sayz Rɛnj dɛn

PETG sheet dɛn gɛt difrɛn tik ɛn saiz, we de kia fɔ difrɛn nid dɛn. Di tik we dɛn kin yuz kin kɔmɔt frɔm 0.5 mm to 6 mm, ɛn dɛn kin ɔda di kɔstɔm saiz dɛn fɔ fit sɔm patikyula domɔt dimɛnshɔn dɛn.

Tiknɛs Rɛnj	Kɔmɔn Sayz dɛn we De
0,5 mm	4' x 8'.
1 mm	4' x 10'.
2 mm	Kastom opshɔn dɛn
3 mm	Kastom opshɔn dɛn

Tipik Aplikeshɔn fɔ PETG Plastik Shit dɛn

PETG plastic sheet dɛn kin yuz bɔku tin dɛn ɛn dɛn kin yuz dɛn na bɔku say dɛn:

● Kɔmɛshɔnal Yuz: Bɔku tɛm dɛn kin si dɛn na rital ɛnvayrɔmɛnt, dɛn kin bi displei kes ɔ patishɔn wɔl, we kin mek pɔsin ebul fɔ si am pan ɔl we dɛn kin mek sɔntin we de ambɔg dɛn.

● Yuz na Rezidenshɛl: Dɛn kin yuz am fɔ intɛriɔ domɔt dɛn, ɛn dɛn kin mek di fayn fayn tin dɛn fayn ɛn dɛn kin mek dɛn kɔntinyu fɔ wok.

● Indastrial Sɛtin: Dɛn kin si am na lab ɛn faktri, usay i impɔtant fɔ mek dɛn nɔ gɛt kemikal.

Wit ɔl dɛn tin ya, PETG plastic sheet dɛn tinap aut as wan fayn choice fɔ do kɔva, we de kɔba durability, aesthetics, ɛn versatility.

 

PC (Polycarbonate) Plastik Shit fɔ Doa

Wetin na PC?

Polikabɔnɛt, we dɛn kin shɔt bɔku tɛm as PC, na wan ay-pafɔmɛnshɔn tɛmplastik we dɛn sabi fɔ in spɛshal taf ɛn i kin yuz bɔku tin dɛn. Na wan pɔpul choice na difrɛn industri dɛm bikɔs ɔf in trɛnk ɛn klia. Polikabɔnɛt sheet dɛn layt bɔt dɛn kin te fɔ lɔng tɛm, ɛn dis kin mek dɛn fayn fɔ kɔba di domɔt.

Prɔpati dɛn fɔ PC Plastik Shit dɛn

1. Supiriɔ Impɛkt Rɛsistɛns

wan. PC sheet dɛn gɛt nem fɔ dɛn ebul fɔ bia wit impak dɛn we bɛtɛ pas glas.

b. Sefty Aplikeshɔn: Dis de mek dɛn fayn fɔ say dɛn usay sef na sɔntin we de mɔna pipul dɛn, lɛk skul ɛn pɔblik bildin dɛn.

2. UV Protɛkshɔn

wan. Bɔku PC sheet dɛn kin kam wit UV protɛkshɔn we dɛn dɔn bil insay.

b. Lɔng layf: Dis ficha de ɛp fɔ mek dɛn nɔ yɔlɔ ɛn pwɛl, ɛn dis de mek shɔ se dɛn las fɔ lɔng tɛm we dɛn de na do.

3. I layt ɛn I izi fɔ handle

wan. We yu kɔmpia am to glas, polikabɔnɛt layt pasmak.

b. Di bɛnifit dɛn: Dis izi we aw dɛn kin ol am kin mek i izi fɔ transpɔt ɛn instɔleshɔn, ɛn dis kin mek i nɔ spɛn bɔku tɛm ɛn di mɔni we dɛn kin spɛn fɔ wok.

4. Waid Rɛnj ɔf Tiknɛs

wan. PC sheet dɛn de insay difrɛn tiknes, we de kia fɔ difrɛn nid dɛn.

b. Opshɔn dɛm: Kɔmɔn tiknɛs dɛn de frɔm 1 mm to 12 mm, we de alaw fɔ fleksibiliti insay dizayn ɛn aplikeshɔn.

5. Kɔstɔm Sayz

wan. Saiz dɛn we nɔ standad kin de izi wan, we kin mek i izi fɔ fɛn di wan we fit ɛni domɔt fayn fayn wan.

b. Avaylabl: Di kɔstɔm opshɔn dɛn de mek shɔ se dɛn kin akɔmod spɛshal dizayn dɛn we nɔ gɛt kɔmprɔmis.

Aplikeshɔn fɔ PC Plastik Shit dɛn

PC plastic sheet dɛn de yuz bɔku bɔku wan fɔ difrɛn domɔt aplikeshɔn dɛn, we inklud:

● Kɔmɛshɔn Spays: Bɔku tɛm dɛn kin yuz dɛn fɔ mek stoa ɛn displei kes dɛn, ɛn dɛn kin mek pɔsin ebul fɔ si dɛn ɛn dɛn kin mek shɔ se dɛn sef.

● Indastrial Envayrɔmɛnt: Dɛn kin kɔmɔn na faktri ɛn westɛm, usay i rili impɔtant fɔ mek i te ɛn fɔ mek i nɔ ambɔg am.

● Yuz fɔ Rezidenshɛl: I fayn fɔ patio domɔt ɛn gadin ɛntrɛ, we de gi difrɛn stayl ɛn wok.

Kwik Rifrɛns Tebul fɔ PC Shit Ficha dɛn

Tin	Tɔk bɔt
Impekt Resistans fɔ mek yu nɔ gɛt ɛnitin fɔ du wit am	I bɛtɛ pas glas, i fayn fɔ yuz fɔ sef
Protɛkshɔn fɔ UV	I de mek i nɔ yɔlɔ, i fayn fɔ yuz na do
We	I layt ɛn i izi fɔ ol
Tiknɛs Rɛnj	1 mm to 12 mm
Kastom Sayz	Nɔn-standad saiz dɛn de

Polikabɔnɛt sheet na fayn fayn tin fɔ pik fɔ kɔba domɔt, we de kɔba sef, fɔ de te, ɛn fɔ mek i fayn. Dɛn kin mit difrɛn nid dɛn akɔdin to difrɛn say dɛn, we kin mek dɛn bi wan opshɔn we pɔsin kin ebul fɔ du fɔ ɛnibɔdi we de luk fɔ mek dɛn ples bɛtɛ.

 

Kɔmpia PVC, PETG, ɛn PC fɔ Doa Kɔva

We yu de pik di rayt plastic sheet fɔ kɔba di domɔt, i impɔtant fɔ kɔmpia di men tin dɛn we PVC, PETG, ɛn PC gɛt. Ɛni matirial gɛt in trɛnk ɛn wikɛd tin dɛn, we de ambɔg di kɔst, di durabiliti, di fayn fayn tin dɛn, ɛn di tin dɛn we dɛn fɔ tink bɔt fɔ di envayrɔmɛnt.

Tin dɛn fɔ Tink bɔt di Kɔst

1. PVC we dɛn kin yuz

wan. Afɔdabiliti: Bɔku tɛm na PVC na di opshɔn we nɔ de tek bɔku mɔni.

b. Badget-friendly Options: Dɛn de yuz am bɔku bɔku wan na difrɛn aplikeshɔn dɛn, we de mek i aksesbul fɔ bɔku prɔjek dɛn we nɔ go brok di bank.

2. PETG we de wok

wan. Prays vs. Pɔfɔmɛnshɔn: Pan ɔl we i dia smɔl pas PVC, PETG de gi gud balans fɔ kwaliti ɛn kɔst.

b. Analysis: I durability ɛn klia de mek i fayn fɔ invɛst fɔ di wan dɛn we de luk fɔ ay pefɔmɛns.

3. PC

wan. Jɔstis fɔ di Kɔst we Ay: Polikabɔnɛt kin gɛt di prayz pas ɔl.

b. Sefty ɛn Durability: Di invɛstmɛnt jɔstifay bay in supiriɔr impak rɛsistɛns ɛn lɔng layf, mɔ na dimand ɛnvayrɔmɛnt.

Durability ɛn Pɔfɔmɛnshɔn

1. PVC we dɛn kin yuz

wan. Di bɛnifit dɛn: I nɔ de mek wata wet ɛn i izi fɔ mek dɛn kia fɔ am.

b. Di tin dɛn we nɔ kin izi fɔ du: I kin brok as tɛm de go, mɔ we di ples wam pasmak.

2. PETG we de wok

wan. Pɔfɔmɛnshɔn: I de du fayn ɔnda difrɛn kɔndishɔn dɛn, inklud di tɛmpracha we de chenj.

b. Versatility: I impak resistans de mek am fayn fɔ ɔl tu indo ɛn ɔda aplikeshɔn.

3. PC

wan. Di Bɛst fɔ Ɛkstrim Envayrɔmɛnt: Polikabɔnɛt kin fayn pan harsh kɔndishɔn, i kin gi trɛnk we nɔ gɛt wan kɔmpitishɔn ɛn i kin mek i nɔ ebul fɔ ambɔg am.

b. Lɔng layf: I fayn fɔ say dɛn we bɔku pipul dɛn kin pas ɔ usay dɛn kin gɛt bad bad wɛda.

Aesthetic Apil we de mek pɔsin fayn

● PVC: PVC de insay difrɛn kɔlɔ ɛn finish dɛn, ɛn i kin falamakata di we aw wud ɔ mɛtal luk, ɛn dis kin mek di dizayn izi fɔ mek i ebul fɔ chenj.

● PETG: Dɛn no am fɔ in ay klia, PETG de gi wan slip, mɔdan apinans. I pafɛkt fɔ sɛtin usay visibiliti impɔtant.

● PC: I de gi wan kɔntempɔral luk ɛn i kin tint ɔ klia, we de mek i fayn fɔ stayl aplikeshɔn dɛn.

Di impak we di envayrɔmɛnt gɛt

1. PVC we dɛn kin yuz

wan. Sastaynabiliti: PVC nɔ de ambɔg di envayrɔmɛnt bikɔs ɔf di we aw dɛn de mek am.

b. Risaykul Opshɔn: Pan ɔl we dɛn kin risaykul am, di prɔses kin kɔmplikt.

2. PETG we de wok

wan. Bɛtɛ Sastaynabiliti: PETG na mɔ eko-friɛndli, wit izi risaykul opshɔn dɛn.

b. Risaykul: Dɛn kin yuz am bak fɔ mek nyu prɔdak, ɛn dis kin mek di west nɔ bɔku.

3. PC

wan. Tin dɛn fɔ Tink bɔt di Envayrɔmɛnt: Polikabɔnɛt kin te, we min se i kin las fɔ lɔng tɛm, ɛn dis kin mek dɛn nɔ nid fɔ chenj am.

b. Risaykul: Dɛn kin risaykul am bak, bɔt di infrastukchɔ fɔ risaykul PC stil de divɛlɔp.

Kwik Rifrɛns Tebul

Tin	PVC we dɛn kin yuz	PETG we dɛn kɔl PETG	PC
Pe	Di wan dɛn we dɛn kin bay pas ɔl	Soba	I pas am pas dat
I kin te fɔ lɔng tɛm	I nɔ de mek di wata nɔ kam	Gud impak resistans	Supiriɔr impak rɛsistɛns
Aesthetic Apil we de mek pɔsin fayn	Difrɛn difrɛn tin dɛn we dɛn kin dɔn fɔ du	Ay klia wan	Luk we de apin naw
Di impak we di envayrɔmɛnt gɛt	Less eko-friɛndli	Mɔ sataynabl	Durable bɔt divɛlɔp risaykul

Fɔ pik di rayt plastic sheet fɔ kɔba domɔt, yu fɔ tek tɛm tink bɔt dɛn tin ya. Ɛnitin we dɛn rayt de gi yu difrɛn bɛnifit dɛn, so yu go ebul fɔ fɛn di bɛst we fɔ yu patikyula nid dɛn.

 

Aplikeshɔn fɔ Plastik Shit dɛn we dɛn de kɔba di domɔt

Plastik sheet dɔn bi pɔpul mɔ ɛn mɔ we dɛn de yuz dɛn na do, bikɔs dɛn kin yuz bɔku tin dɛn ɛn di we aw dɛn kin wok. Lɛ wi chɛk usay dɛn de yuz dɛn tin ya, aw dizayna dɛn de mek nyu tin dɛn, ɛn patikyula ɛgzampul dɛn bɔt prɔjek dɛn we gɛt PVC, PETG, ɛn PC.

Usay dɛn De Yuz Plastik Shit dɛn fɔ Aplikeshɔn na Doa?

1. Di we aw dɛn de yuz di say dɛn we dɛn de liv

wan. Intɛriɔ Doa: Dɛn kin yuz PVC sheet bɔku tɛm na intɛriɔ domɔt bikɔs dɛn kin pe fɔ ɛn dɛn nɔ kin gɛt mɔstɔ. Dɛn pafɛkt fɔ batrum ɔ kichin.

b. Patio ɛn Gadin Doa dɛn: PETG sheet dɛn kin mek pɔsin si fayn fayn wan ɛn i kin te, we kin mek dɛn fayn fɔ patio domɔt dɛn we kin kɔnɛkt insay ɛn ɔda ples dɛn.

2. Di we aw dɛn de yuz am fɔ du biznɛs

wan. Stɔfrɔnt: Bɔku biznɛs dɛn kin yuz polikabɔnɛt (PC) sheet fɔ stɔ frɔnt. Dɛn impak rɛsistɛns de mek shɔ se dɛn sef ɛn dɛn de mek shɔ se dɛn luk fayn.

b. Pɔblik Bildin dɛn: Insay skul ɛn ɔspitul dɛn, dɛn kin yuz PVC ɛn PC sheet fɔ mek dɛn sef ɛn fɔ mek dɛn kɔntinyu fɔ de, we de gi sɔlvishɔn dɛn we sikrit ɛn we go de fɔ lɔng tɛm.

Speshal Ɛgzampul dɛn fɔ Projɛkt dɛn we De Yuz PVC, PETG, ɛn PC

● PVC Projek: Wan lokal jim bin put PVC domɔt dɛn na lɔka rum dɛn fɔ mek di ples wam ɛn fɔ mek dɛn nɔ west. I izi fɔ klin ɛn kia fɔ dɛn domɔt dɛn ya.

● PETG Projek: Wan mɔdan kafe bin de yuz PETG sheet fɔ in ɛntrɛ. Di klia we aw PETG klia de alaw natura layt fɔ flɔd di spes, we de mek in ambians fayn.

● PC Project: Wan art gallery bin de yuz PC sheet fɔ in displei kes dɛn. Di ay impak resistans de protɛkt valyu artwok we i de gi klia luk.

Inovativ Yuz fɔ Plastik Shit dɛn fɔ Dizayn

Dizayn pipul dɛn de fɛn we dɛn fɔ mek plastic sheet dɛn insay di mɔdan akitɛkɛt. Na sɔm ɛgzampul dɛn ya:

● Patishɔn Wɔl: Dɛn kin yuz transparent PC sheet fɔ mek stayl patishɔn wɔl dɛn na ɔfis ples dɛn we opin, we kin mek layt flɔ pan ɔl we dɛn de gi prayvet pat.

● At Instɔlɛshɔn: Atis dɛn kin yuz PETG sheet fɔ mek wɔndaful instɔleshɔn dɛn we de ple wit layt ɛn kɔlɔ, we kin chenj di ples dɛn to ɛkspiriɛns dɛn we kin mek pɔsin fil fayn.

● Sastaynɛbul Dizayn: Sɔm akitɔk dɛn de fɛn ɔl di plastic sheet dɛn we dɛn dɔn risaykul fɔ mek dɛn ebul fɔ sɔlv di domɔt dɛn we nɔ go pwɛl di wɔl, we go mek dɛn nɔ west bɔku tin dɛn ɛn fɔ mek dɛn ebul fɔ mek tin dɛn we go kɔntinyu fɔ de.

Kwik Rifrɛns Tebul fɔ di Aplikeshɔn dɛn

Tin dɛn	Yuz na Rezidenshɛl	Yuz fɔ Kɔmishɔn	Inovativ Dizayn
PVC we dɛn kin yuz	Intɛriɔ domɔt dɛn, lɔka rum dɛn	Pɔblik bildin dɛn, domɔt dɛn we pɔsin kin ebul fɔ bay	Di wɔl dɛn we dɛn kin sheb
PETG we dɛn kɔl PETG	Patio domɔt dɛn, kafe ɛntrɛ dɛn	Stɔ Frɔnt dɛn	Art instɔleshɔn dɛn
PC	N/A	Displei kes, sefty aplikeshɔn	Dizayn we go kɔntinyu fɔ de

Plastik sheet de rivɔlɔshɔn do aplikeshɔn akɔdin to difrɛn sɛktɔ dɛn. Dɛn adaptabiliti, aesthetic apil, ɛn pefɔmɛns de mek dɛn bi valyu choice fɔ ɔl tu di rɛzidɛshɔnal ɛn kɔmɛshɔnal prɔjek dɛm.

 

FAQ we dɛn kin aks

K: Us tin dɛn a fɔ tink bɔt we a de pik plastic sheet fɔ mi domɔt?

A: Tink bɔt aw i kin te, i kin kɔst, i kin mek i fayn, ɛn i kin ambɔg di envayrɔmɛnt. Ɛni matirial (PVC, PETG, PC) de gi yunik bɛnifit fɔ difrɛn aplikeshɔn dɛn.

K: Yu tink se plastic sheet dɛn fayn fɔ yuz na do?

A: Yɛs, matirial dɛn lɛk PETG ɛn PC fayn fɔ yuz na do bikɔs dɛn nɔ de si di wɛda ɛn dɛn kin te.

K: Aw a kin mentenɛns plastic sheet fɔ domɔt?

A: Klin wit mild sop ɛn wata. Nɔ yuz abrasive klin fɔ mek yu nɔ skrach.

K: A kin kɔstɔmayz plastic sheet fɔ sɔm patikyula do saiz dɛn?

A: Na tru tru wan! Dɛn kin kɔt plastic sheet dɛn fɔ fit di kɔstɔm domɔt saiz dɛn.

K: Wetin na di sef tin dɛm fɔ dɛn plastic matirial ya?

A: PVC, PETG, ɛn PC de gi impak rɛsistɛns, we de ɛp fɔ mek sef na difrɛn aplikeshɔn dɛn.

K: Aw di prɔpati dɛm fɔ ɛni matirial de afɛkt dɛn pefɔmɛns na difrɛn envayrɔmɛnt dɛm?

A: PVC na mɔstɔ-rɛsistant, PETG de gi klia ɛn durabiliti, we PC de ɛksɛl insay ekstrim kɔndishɔn.

 

Dɔn

Fɔ pik di bɛst plastic sheet fɔ kɔba di domɔt impɔtant fɔ mek i te ɛn fɔ mek i fayn.

Ki Points Recap: PVC na tin we pɔsin kin bay ɛn i nɔ kin gɛt mɔstɔ. PETG de gi klia ɛn impak rɛsistɛns. PC excels in ekstrim kondishon.

Di las tin dɛn we yu fɔ du: Tink bɔt di patikyula tin dɛn we yu nid, lɛk usay yu de ɛn aw fɔ yuz am. PVC fit fɔ indo aplikeshɔn, we PETG ɛn PC bɛtɛ fɔ ɔdasay ɛn ay-trafik eria.