Yu de ya: Os » Pakɛj Silin Film dɛn » Sial Film fɔ APET Trey » Sial Film PET/PE fɔ APET Trey dɛn » I izi fɔ Pil, Anti-fɔg PET/PE Trey Pakɛj Silin Film dɛn

Share to:

I izi fɔ Pil, Anti-fɔg PET/PE Trey Pakɛj Silin Film dɛn

Dɛn izi fɔ pul, anti-fɔg PET/PE tre lidding film ya fɔ gi fayn fayn klia ɛn sikyuɔr silin fɔ bɔku bɔku it pak aplikeshɔn dɛn, pan ɔl we dɛn de gi fayn opin bak. Di anti-fɔg kɔtin de mek di it we dɛn pak nɔ gɛt kɔndɛns, we de mek shɔ se di it we dɛn pak de kɔntinyu fɔ si klia wan, ivin we dɛn de kip am kol ɔ we dɛn put am na frij. Di izi-pil ficha de mek di kɔstɔma dɛn ebul fɔ opin di paket fayn fayn wan, we nɔ go te ɔ rɔsh.

Mak:
HSQY we de wok
Tayp fɔ Prodakt:
Film we de lid trey
Kɔlɔ:
Klia, Kastɔm
Wayd:
180mm, 320mm, 400mm, 640mm, Kastom

Avaylabl:



Aks

I izi fɔ Pil, Anti-fɔg PET/PE Pakɛj Silin Film s

I izi fɔ Pil, Anti-fɔg PET/PE Pakɛj Silin Film s

Wetin Na Izi-Pil Anti-Fɔg PET/PE Pakɛj Silin Film ?

Izi-pil anti-fɔg PET/PE lidding film na laminated tre -siling film we dɛn mek fɔ kol it dɛn we nid klia prodak visibiliti ɛn kɔvinant kɔnsuma opin. Di PET ɔ BOPET ɔda layt de gi klia, tɛnsiɛl trɛnk, dimɛnshɔnal stebiliti, pankchɔ rɛsistɛns, ɛn printabiliti. Di modifyed PE-based siling layt de mek wan peelable sial to wan kompitibul PE siling surface.

di anti-fog fכnshכn de ridyus di fכmeshכn fכ sεparat wata dכplεt dεm na di film sεf bay we i de inkכrej di kכndens mכsichכ fכ spre insay wan tin we tכn, mכr transparent layεr. di izi-pil fכnshכn de kכntro di opin fכs so dat di lid kin kכmכt sכmtεm wit rεdכks tεa, shred, tre difכmeshכn, εn sialant rεsidyu.

HSQY de saplae nominal tiknes frɔm 0.052mm to 0.09mm , rol wit frɔm 150mm to 900mm , ɛn standad 500m rol wit kɔstɔm kɔnvɛnshɔn we de. Di standad izi-pil anti-fog gred na dizayn fɔ chill-fud pak; friza, maykrowev, ɛn ɔvin aplikeshɔn dɛn nid fɔ gɛt sɛpret gred dɛn we kwalifay.

Izi-pil anti-fɔg BOPET PE lidding film fɔ kol it trey dɛn

Wetin Mek Fɔ Kɔmbayn Izi Pil ɛn Anti-Fɔg?

Kɔnsuma-frenli opin: Kɔntroled peel fɔs de sɔpɔt smol manual opin we nɔ gɛt siza.
Klia frij displei: Anti-fog pefɔmans de ɛp fɔ mek di kɔndenseshɔn drɔp dɛn nɔ mek di it we dɛn pak nɔ klia.
Ridyus film shredding: Wan kɔrɛkt mach peel layt kin opin insay wan pis pas fɔ tear to fragmɛnt.
Ridyus tre difɔmeshɔn: Dɛn kin opin di lid we nɔ gɛt bɔku pawa we de bɛn ɔ damej di tre flɛnch.
Fɔ lɔk di paket fayn fayn wan: Di sil kin kɔntinyu fɔ strɔng fɔ ful-ɔp, fɔ ol am, fɔ sheb am, ɛn fɔ kip am kol.
Ay rital prɛzɛntɛnshɔn: PET klia, glos, anti-fɔg pefɔmɛns, ɛn kɔstɔm printin sɔpɔt shelf apil.
Kastom funkshɔn gred dɛn: Dɛn kin divɛlɔp ay-baria, MAP , printin, pɔrfɔreshɔn, ɛn ɔda opshɔn dɛn sɛpret.
Mashin kɔmpitibliti: Film wit, kɔr, wayndin dairekshɔn, frikshɔn, ɛn sil winda kin mach to ɔtomɛtik tre sila dɛn.

Aw di Izi-Pil Anti-Fɔg Strukchɔ De Wok

Layer	Praymari Fɔnkshɔn	Baya Kɔnsidɛreshɔn
PET / BOPET Ɔta Lay	I de gi klia, stiffness, tɛnsiɛl trɛnk, dimɛnshɔnal stebiliti, pankchɔ rɛsistɛns, ɛn printabiliti.	Kɔnfɛm gej, haz, glos, shrinkage, surface treatment, ɛn printin rikwaymɛn.
Lay we de print	I de kɛr logo, infɔmeshɔn bɔt di prɔdak, instrɔkshɔn fɔ pripia, barɔd, ɛn di we aw pɔsin kin tray fɔ no am.	Kɔnfɛm sɔfa ɔ rivas printin, ink sistɛm, kɔlɔ, print ripit, ɛn ay-mak pozishɔn.
Laminating Adhesive we yu kin yuz	Bɔnd PET to di PE silan ɛn ɛni opshɔnal barɛri layers.	Kɔnfɛm di tɛm fɔ mɛn, di trɛnk we di bond gɛt, di maykreshɔn, di ɔda tin dɛn we de smɛl, ɛn di tin dɛn we dɛn nid fɔ kip na kol.
Opshɔnal Barɛri Layer	Kontrol oksijεn, aroma, mכsichכ, כ MAP gas transmishכn we standad PET/PE nכ inof.	Spɛsifik OTR, WVTR, gas miksɔp, di kayn it, tɛmpracha fɔ stɔrɔj, ɛn di shelf layf we dɛn want.
Modified PE Izi-Pil Layer	Krio wan peelable sil to wan kompitibul PE tre flange en kontrכl peel initiashכn εn prכpagεshכn.	I fɔ mach wit di aktual tre rɛsin, sil winda, kɔntaminɛshɔn lɛvɛl, ɛn di target peel fɔs.
Anti-Fɔg Sɔfays	I de mek di kɔndens mɔstɔ go spre fɔ mek di prɔdak go si klia wan.	Kɔnfɛm anti-fɔg sayd, kɔtin ɔ aditiv sistɛm, durabiliti, stɔrɔj kɔndishɔn, ɛn it-kɔntakt rikwaymɛnt.

Izi-Pil Anti-Fɔg PET/PE Film Spɛsifikeshɔn dɛn

Di tebul we de kam biɛn ya de sɔmariz di kɔmɛshɔnal spɛsifikɛshɔn dɛn we de ɛn di ki tɛknikal paramita dɛn fɔ peel ɛn anti-fɔg validɛshɔn. Faynal garanti prɔpati dɛn fɔ kɔnfyus insay di apruv tɛknikal data sheet matirial , sampul aprɔval, ɛn bay ɔda.

Prɔpati	Stɛndad ɔ Avaylabl Opshɔn	Sɛlɛkshɔn Notis
Tayp fɔ Prodakt	Izi-pil anti-fɔg tre lidding film	Rollstock fɔ tre -sial ikwipmɛnt
Matirial Strukchɔ	BO PET/PE laminate wit izi-pil ɛn anti-fɔg funkshɔnaliti	Kɔnfɛm kɔmplit layt strɔkchɔ, kɔtin, ɛn silan fɔmyulashɔn
Praymari Aplikeshɔn fɔ Trey	Kompatibl PET/PE trey dɛn ɛn PE silin sɔfays dɛn	Send tre gred, drɔin, ɔ fizik sampul
Tik we i tik	0.052–0.09mm , kɔstɔm	Konfam nominal gej ɛn tolɛreshɔn
Standart Width dɛn	180mm, 320mm, 400mm, ɛn 640mm	Broda kɔstɔm rɛnj: 150–900mm
Di Lɛngth fɔ Rol	500m, we yu kin kɔstɔmayz	Dipen pan gej, wit, kɔr, rol wet, ɛn mashin limit
Aw a luk	Klia ɔ kɔstɔm print	Kɔnfɛm di haz, glos, print kɔvarej, transparent winda, ɛn ay mak
Tayp fɔ Sil	I izi fɔ pul am	Layt, midul, ɔ had peel kin divɛlɔp insay prɛktikal limit
Anti-Fɔg we dɛn kɔl	Yɛs	Spɛsifik di tɛst kɔndishɔn, di tɛm we dɛn fɔ tek, di sayd we dɛn kɔt, di tɛmpracha fɔ kip di tin dɛn, ɛn di we aw dɛn kin aksept am
Standart Barɛri	Jɛnɛral prodakt protɛkshɔn	Nɔ klem ay ɔksijɛn barɛri we yu nɔ gɛt OTR data
Ay Barɛri	Opshɔnal EVOH ɔ ɔda multilayer strɔkchɔ	Spɛsifik OTR, WVTR, MAP gas miksɔp, ɛn shelf-layf target
Yuz Maykrowev / Ɔvin	Nɔ fɔ di standad chilled-fud gred	Dɛn nid fɔ gɛt sɛpret kwalifay tɛmal gred
Yuz Friza	Nɔ fɔ di standad chilled-fud gred	Wan gred we nɔ gɛt bɛtɛ tɛmpracha nid fɔ gɛt sɛpret tɛst
Rifrɛns Densiti	Na lɛk 1.36g/cm³ fɔ di laminat we de na di list	Finished density de difrεnt wit layεr rεshכn εn aditiv dεm
Fɔ print	Fleksografik ɔ gravu printin bay prɔjek	Kɔnfɛm artwok, kɔlɔ, ripit, ay mak, ɛn ɛni ia volyum
MOQ we gɛt fɔ du wit am	1000kg na wan	Di kwantiti fɔ tray dipen pan di stok, di wit, di kɔtin, di printin, ɛn di spɛsifikɛshɔn
Di Tɛm dɛn fɔ Pe	30% dipɔsit ɛn 70% balans bifo dɛn ship am	Kɔnfɔm insay di kɔmɛnt kot
Di Tɛm dɛn fɔ Delivri	FOB, CIF, EXW, ɛn di ɔda wan dɛn; ɔda wɔd dɛn kin tɔk bɔt	I go bi se na di say we dɛn de go ɛn di sayz we dɛn ship am
Lid Taym	10–15 dez afta dipɔsit ɛn spɛsifikɛshɔn aprɔval	Di gred dɛn we dɛn print ɔ spɛshal gred dɛn kin nid mɔ tɛm

Easy Peel vs. Lok Sil

Sil Tayp	Opin Bihayv	Tipik Yuz
I izi fɔ Pil	I de opin smɔl smɔl wit kɔntrol fɔs ɛn ridyus tearing ɔ rɛsɛdyu.	Rital it dɛn we dɛn dɔn kol, tin dɛn we dɛn dɔn mek, salad, dairy, dɛzat, mit, sifud, ɛn rɛdi it dɛn.
Had Pil we dɛn kɔl	Peelable bɔt i nid fɔ opin fɔs.	Prodakt dɛn we nid big distribyushɔn sikyɔriti wit ivintual manual opin.
Lok Sil / Weld Sil	I de mek wan strɔng bond we go de sote go; opin kin tear di film ɔ damej di tre flɛnch.	Liquid fud, transpɔt-sɛnsitiv pak, fud savis, ɛn aplikeshɔn dɛn we nɔ de chenj.

Izi-pil anti-fɔg fim fayn fɔ chilled rital pak usay klia prodak visibiliti ɛn kɔvinant kɔshɔma opin impɔtant. Fɔ aplikeshɔn dɛn we nid fɔ gɛt strɔng pɔrmanent klos, dɛn fɔ pik wan lɔk-sil film akɔdin to di tre matirial, prodak, silin kɔndishɔn, ɛn distribyushɔn rikwaymɛnt.

Ɔndastand fɔ Pil Fɔs

Peel Characteristic	Wetin I Min	Wetin Mek I Impɔtant
Di Initiashɔn fɔ Pil	Di fos we yu nid fɔ bigin fɔ es di lid frɔm di peel tab.	Tu ay, i kin fil se i nɔ izi fɔ du; tu low kin ridyus di pakej sekuriti.
Pil Prɔpageshɔn	Di fos we nid fɔ kɔntinyu fɔ opin rawnd di tre flɛnch.	Wan stebul prɔpageshɔn fɔs de mek wan smol kɔshɔma ɛkspiriɛns.
Intafɛshɔnal Pil	Di film rilis na di tre -ɛn-sial intafɛs.	Kin gi wan klin tre rim wit minimal rεsidyu.
Pil we gɛt wanwɔd	Di silin de separet insay in yon layt.	kin gi kכntroled pruf fכ opin bכt i kin lεf wan intenshכnal rεsidεns.
Film Tiar ɔ Shred	Di fim kin brok instead fɔ pul am klin wan.	I kin sho se di sil trɛnk pasmak, i nɔ kin kɔmpit fayn, i nɔ fayn fɔ mek di fim stiff, ɔ i kin gɛt ifɛkt we i de kip.

Aw Anti-Fɔg Pɔfɔmɛnshɔn fɔ Spɛsifiket

'Anti-fog' nɔ fɔ trit am lɛk simpul yes-ɔ-nɔ prɔpati. Di pefɔmɛns dipen pan di it, di tɛmpracha fɔ ful-ɔp, di tɛmpracha we dɛn de kip am, di humidity, di jɔyometri we di pakej de, di we aw dɛn de sho di fim, ɛn di tɛm we dɛn de tɛst am.

Test Variable	Wetin Mek I Impɔtant	Wetin fɔ Rikɔd
Tɛmpratura fɔ Prodak	Fɔ it we wam ɔ we gɛt bɔku wata kin mek mɔ wata vaypa.	Fɔd tɛmpracha we dɛn de ful-ɔp ɛn kol.
Tɛmpratura we dɛn kin kip di tin dɛn we dɛn kin kip	Kondenseshɔn de chenj as di paket de muv bitwin pak, kol rum, transpɔt, ɛn rital.	Target temperechur ɛn alaw fɔ chenj chenj.
Rilativ Humiditi we de na di wɔl	di hכy humiditi de inkrεs di kכndεnsat we de.	Kabinɛt ɛn paket kɔndishɔn usay prɛktikal.
Di Tɛst fɔ Tɛst	Fɔs anti-fɔg pefɔmɛns kin difrɛn frɔm di ɛnd-ɔf-shɛlf-layf pefɔmɛns.	Inspekshɔn intaval ɛn fayn akseptɛns pɔynt.
Fim Ɔriɛnteshɔn	Di anti-fog surface fɔ fes di paket intɛriɔ.	Anti-fog sayd, sil sayd, winding dairekshɔn, ɛn rol lɛbl.
Di Raytin we pɔsin kin si	Dɛn nid fɔ gɛt raytin we dɛn kin ripit fɔ kɔmpia fim dɛn.	Klia eria, droplet saiz, imej klia, ɔ apruv rɛfrɛns foto dɛn.
Di Kɔndishɔn dɛn fɔ Fɔd-Kɔntakt	Di anti-fog kemistri kin de na di it-kɔntakt sayd.	Di kayn it we dɛn de it, di kɔndishɔn we dɛn de muf, di diklareshɔn, ɛn di we aw dɛn want fɔ yuz am.

Sial Windo ɛn Layn-Trayal Rikwaymɛnt dɛn

Wan kɔmɛshɔnal fim we izi fɔ pul nid fɔ gɛt wan winda we wayd fɔ sidɔm, nɔto jɔs wan saksesful laboratori sɛtin. di sil ɛn di peel pefɔmɛns fɔ de stebul we di tɛmpracha, prɛshɔn, di tɛm we dɛn de de, di layn spid, tre tɛmpracha, ɛn di flɛnch kɔntaminɛshɔn difrɛn.

Sil initiashɔn tɛmpracha: Di tɛmpracha we smɔl pas ɔl we de gi akseptabl paket intɛgriti.
Ɔpa silin limit: Maksimal tɛmpracha bifo di peel fɔs go pasmak ɔ di film distɔrshɔn apin.
Prɛshɔn ɛn di tɛm we yu de de: I fɔ fit di ikwipmɛnt, di tul dɛn, ɛn di kɔmɛshɔnal layn spid.
Di we aw pɔsin kin ebul fɔ bia wit di dɔti: Test di mɔs, ɔyl, sos, paoda, di mit we dɛn kin pul, ɛn di tin dɛn we de insay di it.
Pil afta yu dɔn kip am: Mekɔp di we aw yu de opin afta di tɛm we yu want fɔ kip am kol.
Pil-tab dizayn: Kɔnfɔm tab saiz, tre jɔyometri, opin dairekshɔn, ɛn kɔshɔma grip.
Multi-cavity consistency: Test ɛvri kaviti, ed, kɔna, ɛn kɔmpawtmɛnt na di tul.

Tray Matirial Kɔmpatibiliti

Tray Material	Compatibility Gaydɛns	Rikɔmɛnd Aprɔch
PET/PE Trey we yu de yuz	Praymari aplikeshɔn we di tre flɛnch prɛzɛnt wan kɔmpitabl PE silin sɔfays.	Konfam PE gred, flɛnch jɔyometri, piel-tab dizayn, ɛn target peel fɔs.
PET/EVOH/PE Trey we yu de yuz	Bɔku tɛm i kin kɔmpitabl we di ɔdasay silin layt de kɔntinyu fɔ bi PE.	Validate di peel bihayvya, MAP ritɛnshɔn, sil intɛgriti, ɛn kɔmplit barɛri pefɔmɛns.
PE ɔ PE-Kɔt Trey	I kin bi kompitibul we di tre εn lidding PE gred dεm gεt wan suitable peel-sil intarakshכn.	Test sil initieshɔn, peel fɔs, rɛsɛdyu, ɛn pakej distɔrshɔn.
Plɛn APET / R PET fud tre	Wan plein PET flɛnch nɔ kin sial kɔrɛkt wan to di standad PE izi-pil layt.	Yuz wan PET -kɔmpatibl ɔ spɛshal ɛnjinia mɔlti-sabstret silan.
CPET Fɔd Trey fɔ it	Standard izi-pil anti-fog PET/PE film nɔ fɔ ɔtomɛtik trit as ovenable ɔ CPET -kɔmpatibl.	Yuz wan dediket CPET -kompatibl thermal izi-pil gred.
PP / PP-EVOH-PP Trey we yu go yuz	PP siling surface nכmal wan nid PP-kompatibl izi-pil layt.	Yuz wan BOPET /CPP ɔ ɔda kwalifay PP pil strɔkchɔ.

Anti-Fog Izi-Pil Film fɔ MAP Pakɛj

I izi fɔ pul, anti-fɔg, ɛn ay barɛri de sɔlv difrɛn pak rikwaymɛnt dɛn. I izi fɔ mek di peel kɔntrol dɛn opin; anti-fog de kɔntrol di we aw pɔsin kin si; di barεri layεr dεm de kכntro כksijεn εn gas transmishכn.

Spɛsifik di target OTR ɛn WVTR wit yunit, tɛmpracha, humiditi, ɛn tɛst standad.
Gi di CO2, N2, ɛn O2 gas miksɔp we yu dɔn pik ɛn rɛsɛdyuɛl-ɔksijɛn target.
Konfam di barεri strכkchכ fכ כl tu di tre εn lidding film.
Test peel fos, anti-fog, gas ritɛnshɔn, lik rit, ɛn prodak kwaliti ɔlsay na di shelf layf.
fכ prodyuz we de blo, tink bכt maykroperforeshכn כ kכntrol pεrmiabiliti insted fכ maksimal barεri.
Validate di komplit kol chen frɔm pak tru transpɔt ɛn rital displei.

Anti-Fɔg Durabiliti, Blɔk, ɛn Stɔrej

Ej: Anti-fog ɛn peel pefɔmɛns kin chenj we dɛn de kip di rol ɛn afta dɛn dɔn chenj am.
Abrasion: We yu waynd, handel, ɛn mashin kɔntakt kin pwɛl wan surface anti-fog coating.
Blɔk: Di say dɛn we dɛn kɔt fɔ opin klin wan we nɔ fɔ stik ɔ transfa.
Tɛmpratura: If di westɛm wam pasmak, i kin afɛkt di kɔtin, aditiv, adeziv, ɛn rol kwaliti.
Mɔstɔ: Rol dɛn fɔ kɔntinyu fɔ protɛkt frɔm mɔstɔ bifo dɛn yuz am.
Klin aw fɔ ol am: Dɔst, ɔyl, finga prɛnt, ɛn kemikal kɔntaminɛshɔn kin afɛkt wet ɛn sial.
Inventory rotation: Yuz fɔs-in, fɔs-ɔut prosidyuz akɔdin to di apruv stɔrɔj layf.

Prɔblɛm dɛn we Kɔmɔn ɛn Akshɔn dɛn fɔ Kɔrɛkt

Prɔblɛm	Posisibul Kɔz	Rikɔmɛnd Chɛk
I nɔ izi fɔ opin di fim	di tεmprachכ we di silin pasmak, di tεm we i de de fכ lכng, we nכ kכmpatibl tre rεsin, כ כva strכng peel gred.	Ridyus thermal input, verify tre kemistri, ɛn mɛzhɔ di peel fɔs yuz wan we we dɛn gri.
Film Tia ɔ Shred	Di sil trɛnk pasmak, di film stiffness we nɔ fayn, wik lamination, ɔ peel-tab geometry we nɔ fayn.	Rivyu film strɔkchɔ, tik, bond trɛnk, peel angle, ɛn tre dizayn.
Seal Na Tu Wik	Lɔw tɛmpracha, nɔ inɔf prɛshɔn ɔ tɛm fɔ de, kɔntaminɛshɔn, ɔ PE gred dɛn we nɔ kɔmpitabl.	Establish di siling winda ɛn tɛst klin ɛn kɔntaminɛt flɛnch dɛn.
Fɔg de stil de	Anti-fɔg sayd de fes na do, di kɔtin dɔn pwɛl, di kɔndɛnsayt dɔn pasmak, ɔ di gred nɔ fayn.	Verifay di rol oriɛnteshɔn, di kɔtin kɔndishɔn, di it wet, ɛn di kɔndishɔn fɔ tɛst.
Kɔtin Transfa ɔ Blɔk	Nɔ inɔf cure, pasmak stɔrɔj ɔt, ay wayndin prɛshɔn, ɔ inkɔmpatibl sɔfays kɔntakt.	Rivyu di kɔtin spɛsifikɛshɔn, di rol stɔrɔj, wayndin kɔndishɔn, ɛn shelf layf.
Film Wrinkles na di Trey	Tɛnshɔn we nɔ kɔrɛkt, ɔt pasmak, we nɔ de trak fayn, di ed dɛn we di rol dɔn pwɛl, ɔ di tul dɛn we nɔ ivin.	Chek di mashin setup, rol kwaliti, kofishin of frikshɔn, ɛn tul flatnɛs.

Kastom Printin ɛn Fim Ɔriɛnteshɔn

Kastom printin kin inklud logo, prodakt nem, ingridiɛnt, instrɔkshɔn fɔ pripia, barɔd, QR kɔd, de-kɔd eria, traceability, ɛn transparent viewing windows.

Anti-fog sayd: Identify di functional surface we fɔ fes di paket intɛriɔ.
Sil sayd: Kɔnfɔm di modifyed PE izi-pil sɔfays.
Winding direction: Apruv wan winding dayagram fɔ di ɛksaktɔl mashin.
Print ripit: Mach di layout fɔ kɔt ɛn tul.
Ay mak: Kɔnfɛm di sayz, kɔlɔ, pozishɔn, ɛn distans frɔm di edj fɔ di fim.
Print orientation: Yuz surface ɔ rivas printin akɔdin to di laminate dizayn.
Winda fɔ si: Kip di impɔtant say dɛn we transparent nɔ gɛt grafik dɛn we nɔ nid.

Tray-Sealer ɛn Rol Kɔmpatibiliti

Gi di tre -sila brand ɛn mɔdel, fim wit, kɔr insay dayamita, maksimal ɔta dayamita, rol wet, wayndin dairekshɔn, anti-fɔg sayd, sil-sayd ɔriɛnteshɔn, ay-mak sɛns, tul layout, layn spid, silin tɛmpracha, prɛshɔn, ɛn tɛm fɔ de.

Prodakshɔn trayal fɔ evalyu wɛb trakin, tɛnsiɔn, kɔt, sil kɔntinyuiti, pil initieshɔn, pil prɔpageshɔn, film shrɛdin, rɛsɛdyu, lik, kɔntaminɛshɔn tolɛreshɔn, print rɛjista, anti-fɔg rɛytin, kɔtin durabiliti, blɔk, ɛn pefɔmɛns ɔlsay na di chill shelf layf.

Kwaliti-Kɔntrol Rikwaymɛnt dɛn

Pil-fɔs rɛnj: Difayn di spɛshal in wit, di pul angle, di spid, di kɔndishɔn, ɛn di rɛnj we dɛn kin akseptabl.
Anti-fog rating: Yuz di lod fɔ it we dɛn gri pan, di tɛmpracha, di humidity, di tɛm we dɛn fɔ tek, ɛn di rɛfrɛns we yu de si.
Haz ɛn klia: Mɛzhɔ optik kwaliti bifo ɛn afta kɔndɛnseshɔn tɛst.
Sil trɛnk: Kɔnfɔm sufayf distribyushɔn sikyɔriti pan di aktual tre .
Lamination bond strength: Verifay se no delamination nɔ de we yu de sial, stɔrɔj, ɛn pul.
Kofishin fɔ frikshɔn: Kɔntrol unwinding ɛn ay-spid wɛb transpɔt.
Tiknes profayl: I de afɛkt optiks, rol bild, trak, stiffness, ɛn peeling.
Rol kwaliti: Chɛk di ed alaynɛshɔn, wrinkles, tɛliskɔp, jɔyn, kɔr kɔndishɔn, ɛn wayndin dairekshɔn.

Tipik Aplikeshɔn dɛn

Fresh frut ɛn vɛjitebul dɛn
Salad dɛn we dɛn dɔn pripia ɛn tin dɛn we dɛn kin mek fɔ it
Chilled rɛdi it dɛn
Fresh mit, bɔd, ɛn sifud
Dairy prodakt, dɛzat, yogɔt, chiz, ɛn dip
Bekeri prodak ɛn snek dɛn we dɛn dɔn pripia
Deli it ɛn tin dɛn we dɛn dɔn prosɛs
PET/EVOH/PE MAP trey dɛn yuz wan separet spɛsifikɛd ay-baria izi-pil anti-fɔg lid
Prayvet-lɛbul it pak we nid fɔ opin fayn ɛn klia rital displei

Eksplɔrɔ HSQY dɛn PET/PE tre rɛnj ɛn PET/PE tre siling film kategori fɔ rilayt pak sɔlvishɔn.

Infɔmeshɔn we Yu nid fɔ gɛt Kɔrɛkt Kɔt

Trey matirial, layt strɔkchɔ, spɔlayt, prodak kɔd, drɔin, ɔ fizik sampul
Trey dimɛnshɔn, flɛnch wit, peel tab, kɔmpatmɛnt, ɛn fil wet
Target peel-fors rεnj εn prεfrεd intafεshal כ kכhεsiv pεl bihayv
Di kayn it, di tɛmpracha fɔ di prɔdak, di mɔstɔ lɛvɛl, di ɔyl we de insay, ɛn di kɔndishɔn fɔ ful-ɔp
Chil-stɔrɔj tɛmpracha, humiditi, target shelf layf, ɛn anti-fɔg akseptɛns krayteria
Nid fɔ standad barɛri, ay barɛri, MAP , printin, pɔrfɔreshɔn, friza, ɔ ɔt-tritmɛnt pefɔmɛns
Trey-siling mashin brand, model, tul layout, ɛn kɔmɛshɔnal layn spid
Film tiknes, wit, lɔng, kɔr ID, maksimal ɔta dayamita, rol wet, ɛn wayndin dairekshɔn
Anti-fɔg sayd, sil sayd, print ɔriɛnteshɔn, ay-mak pozishɔn, ɛn print ripit
OTR, WVTR, gas miksכp, rεsidyual-כksijεn, lik-rεt, כ pankshכn rikwaymεnt we i apɔynt
Rikwayd fud-kɔntakt, maykreshɔn, kwaliti, barɛri, ɛn dɛstineshɔn-maket dɔkyumentri
Trayal kwantiti, anual volyum, dilivri dɛstineshɔn, ɛn di de we dɛn aks fɔ lanch

Rikwest Izi-Pil Anti-Fɔg Film Sampul dɛn

Kastamayzeshɔn Savis dɛn

Kastom 0.052–0.09mm tik ɛn tolɛreshɔn
Kastom 150–900mm rol wit
Kastom rol lɔng, kɔr, rol wet, maksimal ɔta dayamita, ɛn wayndin dairekshɔn
Layt pil, midul pil, had pil, ɛn aplikeshɔn-spɛsifi k izi-pil strɔkchɔ dɛn
Surface-coated ɔ intanɛnt-aditiv anti-fɔg strɔkchɔ dɛn
Standart-baria, EVOH ay-baria, MAP , lכw-tεmpratura, εn hεt-rεsistant divεlכpmεnt
Fleksografik ɔ gravy printin fɔ branding ɛn traceability
Kastom ay mak, print ripit, transparent winda, kɔdin eria, perforeshɔn, ɛn venting
Trey kɔmpatibiliti, peel-fɔs, anti-fɔg, sil-windo, kɔntaminɛshɔn, lik, ɛn layn trayal
Kastom katon, rol lɛbl, palet mak, ɛn intanashɔnal delivri

Kwaliti ɛn Kɔmplians Dokumɛnt

HSQY kin gi kwaliti-mɛnejmɛnt, inspekshɔn, ɛn matirial dɔkyumentri we de fɔ di gred we dɛn dɔn gri fɔ. Di wan dɛn we de bay fɔ aks fɔ di tɛknikal data sheet matirial , sɛtifiket fɔ analisis, fud-kɔntakt diklareshɔn, maykreshɔn ɔ kɔmplians ripɔt, anti-fɔg tɛst we, peel-fɔs we, barɛri data we i apɔynt, ɛn rol inspekshɔn krayteria.

ISO 9001 na kwaliti-mɛnejmɛnt-sistim sɛtifiket ɛn dɛn nɔ fɔ prɛzɛnt am as prodak-spɛsifi k pruf fɔ sef fɔ it-kɔntakt. SGS ɔ fud-kɔntakt klem fɔ no di rayt ripɔt, laminate strɔkchɔ, anti-fɔg sistɛm, di kayn it, di tɛmpracha, di tɛm we i fɔ tek, ɛn di kɔndishɔn dɛn we dɛn want fɔ yuz.

Izi-pil anti-fɔg PET PE lidding film kwaliti dɔkyumentri

HSQY Intanɛshɔnal Ɛgzibishin dɛn

2024 Mɛksiko Ɛgzibishin

2025 Filipins Ɛgzibishin

2024 Paris Ɛgzibishin

2023 Saudi Ɛgzibishin

2024 Amɛrikan Ɛgzibishin

2017 Shanghai Ɛgzibishin

2018 Shanghai Ɛgzibishin

2023 Amɛrikan Ɛgzibishin

Prodakshɔn ɛn Pak

Izi-pil anti-fɔg BOPET PE lidding film rol prodakshɔn ɛn inspekshɔn

Protektiv pak fɔ izi-pil anti-fɔg PET PE lidding film rol dɛn

Palet pak fɔ izi-pil anti-fɔg PET PE film ɛkspɔt ɔda

Pakɛj ɛn Delivri

Sampul Pakɛj: Dɛn kin protɛkt smɔl smɔl rol dɛn insay PE bag ɛn katon frɔm mɔstɔ, dɔst, abrashɔn, kris, ɛn ed damej.

Rol Packaging: Dɛn kin rap kɔmɛshɔnal rol dɛn wit PE film ɛn pak dɛn insay katon ɔ ɔda fayn ɛkspɔt fɔmat.

Palet Palet: Dɛn kin yuz lɛk 500–2000kg pan wan plai wud palet akɔdin to di rol dimɛnshɔn ɛn transpɔt kɔndishɔn.

Rol Identification: Lɛbul dɛn kin sho gred, strɔkchɔ, tik, wit, lɔng, lɔt nɔmba, anti-fɔg sayd, sil sayd, waynd dairekshɔn, ɛn prodakshɔn de.

Fɔ kip di rol dɛn: Kip di rol dɛn na say we klin, dray, ɛn we di tɛmpracha de kɔntrol, fa frɔm di san, ɔt pasmak, wet, dɔst, ɛn kemikal.

Dilivri Tɛm: FOB, CIF, ɛn EXW na opshɔn dɛn we dɛn dɔn list; ɔda wɔd dɛn kin tɔk bɔt.

Lid Taym: Jɛnɛral 10–15 dez afta dipɔsit ɛn fainal spɛsifikɛshɔn aprɔval, we de ɔnda kɔtin, printin, strɔkchɔ, kwantiti, ɛn prodakshɔn schedule.

Kwɛstyɔn dɛn we Dɛn Kin Aks Bɔku tɛm

Wetin na izi-pil anti-fog PET/PE lidding film?

Na BO PET/PE tre -siling laminate we de kɔba wan modifyed izi-pil silan wit wan anti-fɔg sɔfays fɔ mek i izi fɔ opin ɛn klia frij displei.

Aw di anti-fɔg wok de wok?

i de mek di sכfayz wet fayn so di kכndens mכsichכ de spre insay wan tin transparent layεr insted fכ fכm sεparat dכplεt dεm we de skata layt.

Yu tink se anti-fog film de stɔp kɔndenseshɔn kpatakpata?

Nɔ, mɔstɔ kin stil kɔndens. Di anti-fog sistem de chenj di shep ɛn distribyushɔn fɔ di wata fɔ mek pɔsin ebul fɔ si am fayn fayn wan.

Wetin mek i izi fɔ pul di fim?

Wan modifyed PE-based siling layεr de kכntro di peel initiashכn, prכpagεshכn, εn fεil mכd we dεn sial am to wan kompatibl PE tre flenj.

Yu tink se dɛn kin mek di peel fɔs we yu want?

Yɛs. Layt, midul, ɔ had peel kin divɛlɔp insay prɛktikal limit. Gi di target fɔs, tɛst we, tre sampul, ɛn stɔrɔj kɔndishɔn.

Us trey dɛn dis film kin sial?

Di standad PE izi-pil layt na men wan fɔ PET/PE , PET/EVOH/PE , PE, ɛn PE-kɔt trey dɛn wit wan kɔmpitabl PE silin sɔfays.

I kin sial plein APET , CPET , ɔ PP trey dɛn ?

Nɔto ɔtomɛtik wan. Plɛn PET , CPET , ɛn PP sɔfays kin nid difrɛn silant kemistri. Send di aktual tre fɔ kɔmpitibliti tɛst.

Wetin kin mek di fim rɔtin ɔ shred?

di posisibul kכz dεm na fכ silin tεmprachכ pasmak, tre rεsin we nכ kכmpatibl, hכy pil fכs, di film stiffness we nכ fayn, wik lamination, pwεl pכl-tab disayn, כ stכrej ifekt.

Yu tink se dɛn kin jɔyn anti-fɔg ɛn ay barɛri?

Yɛs. EVOH ɔ ɔda barɛri layt kin ad fɔ MAP . Anti-fog, peel, OTR, WVTR, sil integriti, ɛn gas ritɛnshɔn fɔ tɛst sɛpret wan.

Yu tink se di standad gred friza, maykrowev, ɔ ɔvin sef?

Nɔ, di standad kol-fud gred nɔ de fɔ yuz friza, maykrowev, ɔ ɔvin. Aplikeshɔn dɛn we gɛt fɔ du wit lɔw tɛmpracha ɔ ɔt tritmɛnt nid fɔ gɛt sɛpret kwalifay gred.

Yu tink se dɛn kin print di fim bay dɛnsɛf?

Yɛs. Fɔ print kin gɛt logo, infɔmeshɔn bɔt di prɔdak, barɔd, QR kɔd, deti-kɔd eria, instrɔkshɔn, ɛn winda dɛn we pɔsin kin si klia wan.

Us say fɔ fes di it?

Di aprɔv anti-fɔg ɛn izi-pil silin sayd fɔ fes di paket intɛriɔ. Kɔnfɛm di rol lɛbl ɛn di wayndin dayagram bifo yu lod di mashin.

Us saiz dɛn de?

Standart wit dɛn inklud 180mm, 320mm, 400mm, ɛn 640mm. Kastom wit frɔm 150–900mm, tiknes frɔm 0.052–0.09mm, ɛn 500m standad rol lɔng de akɔdin to di spɛsifikɛshɔn we dɛn nid.

Wetin na di minimum ɔda kwantiti?

Di standad MOQ na 1000kg. Sampl ɛn trayal kwantiti dipen pan stok, kɔtin, wit, printin, barɛri, ɛn pil rikwaymɛnt.

A kin aks fɔ sampul ɛn layn trayal?

Yɛs, i go bi se di tin dɛn we de de ɛn di tin dɛn we dɛn tɔk bɔt. Gi di tre , it aplikeshɔn, anti-fɔg tɛst kɔndishɔn, target peel bihayvya, mashin ditel, ɛn rol kɔnfigyushɔn.

Bɔt HSQY Plastik Grup

HSQY Plastik Grup de saplae izi-pil anti-fog PET/PE liding film, PET/PE trey dɛn , PET/EVOH/PE ay-baria trey dɛn ɛn film, lɔk-sil film, izi-pil film, plastic sheet matirial s, ɛn rilat pak prodak fɔ intanashɔnal B2B kɔstɔma dɛn.

Di tim kin sɔpɔt anti-fɔg spɛsifikɛshɔn, pil-fɔs divɛlɔpmɛnt, tre kɔmpatibiliti, fim-strɔkchɔ sɛlɛkshɔn, rol kɔnvɔshɔn, printin, barɛri sɛlɛkshɔn, sɛmpul, prodakshɔn-layn trayal, kwaliti dɔkyumentri, ɛkspɔt pak, ɛn intanashɔnal delivri.

Kontakt HSQY fɔ Izi-Pil Anti-Fɔg Film

Bifo:

Nɛks: