Yu de ya: Os » Plastik shit » PVC fom bod » PVC Laminated Fom Bod » Wud Greyn PVC fom bod Supplier

Share to:

Wud Greyn PVC fom bod Supplier

HSQY wud gren PVC fom bod de insay 1–35mm tiknes ɛn 0.35–1.0 g/cm3 density fɔ fɔnicha, kabinɛt, sayn ɛn intɛriɔ prɔjek, wit kɔstɔm saiz, kɔlɔ ɛn finish.

Ɛgzampul:
Wud Greyn PVC fom bod
Mak:
HSQY we de wok
Kod: 1.
Wud Gren PVC fom bod Fɔ Kabinɛt
Tik we i tik: .
1-20mm na wan
Kɔlɔ:
Wayt ɔ kɔlɔ
Sayz:
1220 * 2440mm ɔ kɔstɔmayt

Di tin dɛn we yu kin gɛt:



Aks

Diskripshɔn fɔ di Prodak

Diskripshɔn fɔ di Prodak

Wud Gren PVC fom bod fɔ Fɛnichɔ ɛn Sayn

HSQY wud gren PVC fom bod de kam togɛda wan laytwɛt sɛlular PVC kɔr wit wan dɛkɔretiv wud gren sɔfays fɔ fɔnicha, kabinɛt, intɛriɔ dɛkɔreshɔn, sayn, displei ɛn sɔm kɔnstrɔkshɔn aplikeshɔn dɛn.

di bod de insay tiknes frכm 1mm to 35mm εn dεnsiti frכm aprכksimatli 0.35 to 1.0 g/cm³. Standart sheet matirial fɔmat dɛn inklud 1220 × 2440mm, 915 × 1830mm, 1560 × 3050mm ɛn 2050 × 3050mm, wit kɔstɔmayz dimɛnshɔn dɛn we de fɔ B2B prɔjek dɛn.

Sɔfayz opshɔn dɛn inklud wud gren, glos ɛn mat finish, we yu kin pik kɔlɔ frɔm wayt, rɛd, yɔlɔ, blu, grɛn, blak ɛn kɔstɔmayz kɔlɔ dɛn akɔdin to wetin di prɔjek nid.

Di fom PVC strɔkchɔ kin kɔt, rout, drɔ, panch, sand, fast ɛn bon yuz fayn tul ɛn kɔmpitabl PVC adeziv, we de mek di bod fayn fɔ fɔnicha manifakta, sayn mek, intɛriɔ kɔntrakta, distribyushɔn ɛn fabricatɔ.

Rikwest PVC fom bod Prayz Rikwest fɔ wan Sampul

Wud Gren PVC fom bod Prodakt Displei

Fɔnicha Aplikeshɔn

Advatayzmɛnt Aplikeshɔn

Wud Greyn PVC fom bod Spɛsifikeshɔn dɛn

di prɔpati dɛn	Ditiɛl dɛn bɔt
Di Nem fɔ Prodak	Wud Greyn PVC fom bod
Tin dɛn	PVC
Bɔd Strukchɔ	Fom / Sɛlular PVC Bɔd
Tik we i tik	1–35mm na di wan
Tik	0,35–1,0 g/cm⊃3, ɛn di ɔda wan dɛn;
Standart Sayz dɛn	1220 × 2440mm, 915 × 1830mm, 1560 × 3050mm, 2050 × 3050mm
Kastom Sayz	I de akɔdin to wetin di prɔjek nid
Kɔlɔ	Wait, Rɛd, Yɔlɔ, Blu, Grin, Blak, Wud Greyn, Kastɔm Kɔlɔ dɛn
Sho	Wud Gren, Glossy, Mat
Di we aw dɛn de du di wok	Kɔt, rout, saw, drɔ, panch, sand, fastɛn ɛn bond
Men Aplikeshɔn dɛn	Fɛnichɔ, kabinɛt, advatayzmɛnt, printin, sayn, intɛriɔ dɛkɔreshɔn ɛn kɔnstrɔkshɔn prɔjɛkt dɛn
MOQ we gɛt fɔ du wit am	3 Tan dɛn
Kwaliti Kɔntrol	Raw matirial sɛlɛkshɔn, prɔses monitarin ɛn pies-bay-pies chɛk
Di we aw dɛn de pak di tin dɛn	Plastik Bag, Katon, Palet, Kraft Pepa
Di Tɛm dɛn fɔ Pe	T/T, L/C, D/P, Wɛstɛn Yuniɔn
Di Taym fɔ Delivri	Aproksimayt 15–20 Dez Afta Dipɔsit
Dokumɛnt we dɛn dɔn list	SGS

Tiknes, density, saiz, surface finish ɛn mɛkanikal pefɔmɛns fɔ kɔnfyus fɔ di ɛksaktɔl bod gred bifo bɔlk prodakshɔn bikɔs dɛn paramita ya kin afɛkt mashin, rigiditi, fastɛns ɛn finish-prɔdakt pefɔmɛns.

Send Yu PVC fom bod Spɛsifikeshɔn dɛn

Fizik Prɔpati dɛn fɔ Wud Greyn PVC fom bod

Di valyu dɛn we de dɔŋ ya na di rɛfrɛns rɛnj dɛn we dɛn dɔn pablish frɔm di HSQY prodak data we de naw. Aktual rizulyt kin difrεn wit di density, tiknes, fכmyuleshכn, surface kכnstrכkshכn εn tεst mεtכd. Rikwest di aplikebul teknikol data ɔ tɛst ripɔt we dɛn nid wan patikyula injinɛri valyu.

Testing Item	Unit	we dɛn dɔn pablish Rifrɛns
Tik	g/cm⊃3 we de na di bɔdi;	0.35–1.0
Tensile Strɔng we pɔsin kin gɛt	MPa	12–20
Strɔng fɔ Bɛnd	MPa	12–18
Bending Elasticity Modulus fɔ di wan dɛn we de du di wok	MPa	800–900 ɛn 900
Impekt Strɔng	kJ/m⊃2 ɛn di ɔda wan dɛn;	8–15
Elongation na Brek	% .	15–20
Shore Hardness we pɔsin kin gɛt	Shore D	45–50
Wata we De Absɔp	% .	≤1.5
Vicat Softening Point we dɛn kin yuz fɔ mek tin dɛn	°C	73–76
Faya Biɛvhɔ	Gret Spɛsifi k	di prodakt data we de naw de se i de sεlf-extinguish insay less dan 5 sekכnd; kɔnfɔm di we aw dɛn de du di tɛst ɛn di rayt bod gred

Wud Gren Finish fɔ Fɛnichɔ ɛn Intɛriɔ Projɛkt dɛn

Di wud gren sɔfays de gi PVC fom bod wan dɛkɔretiv apinans fɔ fɔnicha panɛl, kabinɛt, shelf, rum divayda ɛn intɛriɔ dɛkɔretiv kɔmpɔnɛnt dɛn we nɔ de abop pan di vijual apinans fɔ wayt PVC bod we nɔ dɔn.

Fɔ fɔnicha program, dɛn fɔ pik di bod tik ɛn density we dɛn nid akɔdin to panɛl span, hadwae, lod, skru-holdin rikwaymɛnt, edj tritmɛnt ɛn kabinɛt kɔnstrɔkshɔn.

Wud gren apinans, glos lɛvɛl ɛn kɔlɔ fɔ apruv yuz wan aktual sampul bifo mas prodakshɔn we vijual maching impɔtant.

Ki Ficha dɛn fɔ Wud Greyn PVC fom bod

Laytwɛt Sɛlula Strukchɔ: Di fom PVC kɔr de ridyus di bod wet we yu kɔmpia am wit wan ikwal sɔlid PVC panɛl we i de mentɛn yusful rigiditi fɔ fayn fɔnicha, sayn ɛn dɛkɔretiv aplikeshɔn.

Wud Greyn Surface: Dekorativ wud gren apinans na fayn fɔ kabinɛt, fɔnicha panɛl, intɛriɔ displei ɛn akitekchɔral dɛkɔreshɔn.

Low Published Water Absorption: Di prodak data we de naw de list di wata absɔpshɔn we na ≤1.5%. Aktual moisture pefomans dipen pan bod gred, ekspoz edj, joyn en instɔleshɔn kɔndishɔn.

Published Impact Strength: Di data we de naw de list wan impak-strength rεnj we na 8–15 kJ/m². Rikwest di aplikebul tɛst we if impak pefɔmɛns na prɔjek rikwaymɛnt.

Kɔrɛshɔn Rɛsistɛns: PVC na tin we dɛn kin pik fɔ envayrɔmɛnt dɛn we nid fɔ rɛsistɛns to mɔstɔ ɛn bɔku kemikal dɛn. Kεmikכl kכmpatibiliti fכ vεrifik εgεst di spεsifi k sכbstans, kכnsantreshכn εn tεmprachכ.

I izi fɔ mek di bod: Dɛn kin prosɛs di bod bay we dɛn de yuz di rayt we fɔ saw, rout, drɔ, panch, sand, fastɛn ɛn bond.

Faya Biɛvhɔ: Di prɔdak data we de naw de tɔk bɔt di bɔd we dɛn dɔn tɛst se i de kil insɛf insay lɛs dan 5 sɛkɔn. Di wan dɛn we de bay we nid fɔ gɛt wan patikyula faya klasification fɔ aks fɔ di standad we dɛn de yuz, di tɛst ripɔt, di density ɛn tiknes.

PVC fom bod Densiti Sɛlɛkshɔn

Densiti na impɔtant bay bay paramita fɔ PVC fom bod bikɔs i de inflɔws bod wet, rigiditi, mashin bihayvya, fasten pefɔmɛns ɛn kɔst.

Projek Rikwaymɛnt	Baya Fɔ Kɔnfɔm
Displei dɛn we Layt Wet	Rikwayd stiffness, tiknes ɛn akseptabl bod wet
Sayn dɛn we dɛn Print	Surface smoothness, flatness, ink kompitibiliti ɛn di we aw dɛn de mawnt am
Fɛnichɔ Panel dɛn	Densiti, tiknes, skru holdin, panɛl span ɛn lod
Di Kɔmpɔnɛnt dɛn na di Kabinɛt	Hadwɔd instɔleshɔn, hinj fastɛns ɛn edj finish
CNC Routing we dɛn de yuz	Tulin, fid ret, surface kwaliti ɛn rikwayd edj finish

Fabrikeshɔn ɛn Prɔsesin

Yu kin mek wud gren PVC fom bod yuz bɔku kɔvɛnshɔnal wud wok ɛn plastic-prɔsɛsin we dɛn yuz di rayt tul ɛn prɔses paramita.

Proses	Aplikeshɔn Kɔnsidɛreshɔn
Sawing / Kɔt fɔ kɔt	Pik di rayt bled jɔyometri akɔdin to tik ɛn di ed kwaliti we yu want
CNC Routing we dɛn de yuz	Yuzful fɔ lɛta, kabinɛt pat, grov ɛn dɛkɔretiv shep
Fɔ drɔl	Kɔnfɛm ol spays ɛn fastɛns lod fɔ di density we yu dɔn pik
Sandin	Yu kin yuz am fɔ edj finish; protɛkt di dɛkɔretiv sɔfays we dɛn de prosɛs
Bonding we gɛt fɔ du wit dɛnsɛf	Yuz wan adeziv we kɔmpitabl wit PVC ɛn di mating sabstret
Fɔ fastnɛs	Dɛn kin yuz skru, nel ɔ rivet usay di bod dɛnsiti ɛn di jɔyn dizayn fayn
Fɔ print	Konfam surface finish, ink kompitibiliti en adheshon pan wan aktual sampul

Aplikeshɔn fɔ Wud Greyn PVC fom bod

Aplikeshɔn	Tipik Prodakt dɛn
Tin dɛn	Kabinɛt, shelf, fɔnicha panɛl, stɔrɔj yunit ɛn dɛkɔretiv kɔmpɔnɛnt dɛn
Kichin ɛn Washrum Kabinɛt dɛn	Kabinɛt bɔdi, domɔt, shelf ɛn intɛriɔ panɛl dɛn we de ɔnda strɔkchɔral validɛshɔn
De advatayz	Bilbɔd, ɛgzibishin displei, advatayzmɛnt panɛl ɛn rout lɛta
Fɔ print	Skrin printin ɛn kɔmpitabl flatbed printin aplikeshɔn dɛn
Intɛriɔ Dɛkɔreshɔn	Wall panɛl, patishɔn, rum divayda ɛn dɛkɔretiv sɔfays
Egzibishin ɛn Ritayl	Displei stand, rital fiks ɛn tɛmporari ɛgzibishin strɔkchɔ
Di Kɔnstrɔkshɔn Projɛkt dɛn we Dɛn Dɔn Pik	Intɛriɔ bod ɛn sɔm akitɔkchral kɔmpɔnɛnt dɛn we dɛn dɔn pik afta aplikeshɔn validɛshɔn
Kwɛmyuɛl-Rɛsistɛns Projɛkt dɛn	Sεlekt panεl dεm usay dεn dכn vεrifik kכmpatibiliti wit di spεsifi k kεmikכl envayroment

Bilbɔd Aplikeshɔn

Kabinɛt Aplikeshɔn

Diskus Yu PVC fom bod Projek

Furniture Gred vs Saynaj Gred Rikwaymɛnt dɛn

Fɔnicha ɛn sayn projɛkt kin nid difrɛn kɔmbaynshɔn fɔ density, tik, sɔfays apinans ɛn mɛkanikal pefɔmɛns. Spɛsifik di aplikeshɔn we yu want we yu de aks fɔ kot pas fɔ pik ɔl bay sheet matirial tik.

Rikwaymɛnt	Fɛnichɔ / Kabinɛt Projɛkt	Sayn / Displei Projɛkt
Tik we i tik	Selekt fɔ rigiditi, panɛl span ɛn hadwae	Selekt fɔ displei saiz ɛn di we aw dɛn de mawnt am
Tik	Impɔtant fɔ mashin ɛn fasten pefɔmɛns	Balans rigiditi ɛn lɔw wet
Sho	Wud gren apinans ɛn finish kɔnsistɛns	Print kompitibiliti, smol smol ɛn kɔlɔ
Di we aw dɛn de du di wok	Routin, drɔlin, fastɛn ɛn edj finish	Printin, routin, kɔt ɛn mawnt
Gri fɔ	Fizik sampul ɛn hadwae tɛst we dɛn kin rɛkɔmɛnd	Print ɛn kala sampul aprɔval we dɛn kin rɛkɔmɛnd

Wetin Baya dɛn Fɔ Kɔnfɛm Bifo Dɛn Ɔda

Pɔch Aytem	Infɔmeshɔn fɔ Gi
Aplay fɔm	Fɛnichɔ, kabinɛt, sayn, printin, displei, patishɔn ɔ ɔda aplikeshɔn
Tik we i tik	Tik we dɛn nid insay di rɛnj we de
Tik	Rikwayd density ɔ finish-prɔdakt pefɔmɛns
Sayz fɔ di Shit	Standart saiz ɔ rikwayd kɔstɔmayz dimɛnshɔn dɛn
Wud Greyn	Dizayn we dɛn nid, kɔlɔ rɛfrɛns ɛn glos lɛvɛl
Di we aw dɛn de du di wok	CNC routing, drilin, printin, bonding, fastening ɔ ɔda fabrication
Di tin dɛn we dɛn nid fɔ du wit mɛkanikal	Rikwayd trɛnk, impak, hadnɛs ɔ fastɛns pefɔmɛns
Faya Rikwaymɛnt	Faya-tɛst standad ɛn klasification we dɛn nid, if i apɔynt
Yuz am na do	UV ɛksplɔshɔn we dɛn nid, di wɛda kɔndishɔn ɛn savis layf
Ɔmɔs	Initial oda kwantiti ɛn ɛkspɛkt ripit dimand
Usay yu de go	Kɔntri, pɔt ɛn di delivri schedule we dɛn nid

Get wan Wud Greyn PVC fom bod Kot

Kwaliti Kɔntrol

Di prodak infɔmeshɔn we de naw de diskrayb wan tri-stej kwaliti-kɔntrol prɔses we de kɔba raw matirial sɛlɛkshɔn, prodakshɔn-prɔses monitarin ɛn finish-bɔd chɛk.

Fɔ ripit B2B ɔda, di wan dɛn we de bay fɔ difayn di tiknɛs tolɛreshɔn we dɛn gri pan, di density, dimɛnshɔn, di we aw i tan lɛk di sɔfa, di kɔlɔ rɛfrɛns ɛn ɔda impɔtant akseptans krayteria dɛn pan di spɛsifikɛshɔn we dɛn bay.

Pak ɛn Deliv

Di tin dɛn we yu kin pik fɔ pak: Di infɔmeshɔn bɔt di prɔdak we dɔn de, de sho plastic bag, katon, palet ɛn kraft pepa.

Surface Protection: Konfam protektiv-film ɔ surface-protection rikwaymɛnt we di wud gren finish fɔ de fri frɔm skrat we dɛn de transpɔt ɛn mek.

Palet Kɔnfigyushɔn: Dɛn fɔ kɔnfyus di arenjmɛnt fɔ di palet akɔdin to di bod dimɛnshɔn, tik, kwantiti ɛn usay dɛn de go.

Peymɛnt Tɛm: T/T, L/C, D/P ɛn Western Union de na di list we de na di prɔdak infɔmeshɔn we de naw.

Lid Taym: Na lɛk 15–20 dez afta dɛn dɔn put mɔni akɔdin to di prɔdak data we de naw, we de ɔnda di bɔd spɛsifikɛshɔn, kwantiti ɛn prodakshɔn schedule.

Teknik Data Sheet we de na di wɔl

PDF Aykɔn PVC fom bod SGS PDF we gɛt di taytul

Di wan dɛn we de bay fɔ rivyu di SGS ripɔt we de fɔ kɔnfɔm ustɛm us prɔdak, tɛst tin dɛn, standad ɛn prodakshɔn kɔndishɔn dɛn kɔba. Wan SGS ripɔt nɔ fɔ ɔtomɛtik intaprit as sɛtifikeshɔn fɔ ɛvri pefɔmɛns klem fɔ ɛvri density, tiknes ɔ sɔfayz opshɔn.

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt wud gren PVC fom bod

Wetin na wud gren PVC fom bod?

Wud gren PVC fom bod na laytwɛt sɛlular PVC panɛl wit dɛkɔretiv wud-layk sɔfays. Dɛn kin yuz am fɔ fɔnicha, kabinɛt, displei, sayn ɛn intɛriɔ dɛkɔretiv aplikeshɔn dɛn.

Us tik tik dɛn de?

Di diskripshɔn fɔ di prɔdak we de naw de sho di tik dɛn frɔm 1mm to 35mm. Di tik ɛn dɛnsiti kɔmbayn dɛn we de fɔ kɔnfɔm bifo yu ɔda.

Us density dɛn de?

di pכblish dεnsiti rεnj na aprכksimatli 0.35–1.0 g/cm³. Selekt di density akɔdin to di rigidity, mashin, fastening, wet ɛn finish aplikeshɔn we yu nid.

Us standad sheet matirial saiz dɛn de?

Di prodakt data list we de naw na 1220 × 2440mm, 915 × 1830mm, 1560 × 3050mm ɛn 2050 × 3050mm. Dɛn kin tɔk bak bɔt di dimɛnshɔn dɛn we dɛn mek fɔ yusɛf.

Yu tink se yu kin yuz wud gren PVC fom bod fɔ kabinɛt?

Yɛs, dɛn rayt di kabinɛt ɛn fɔnicha aplikeshɔn dɛn fɔ dis prɔdak. Di wan dɛn we de bay fɔ pik di tik ɛn dɛnsiti akɔdin to di panɛl span, lod, hinj, skru holdin ɛn ɔda hadwae we dɛn nid.

Na PVC fom bod watapruf?

Di HSQY data we de naw de list di wata absɔpshɔn we na ≤1.5%. Bifo yu trit di wan ol strɔkchɔ we dɛn dɔn instɔl lɛk se watapruf ɔtomɛtik wan, evalyu di ed dɛn we de na do, di jɔyn dɛn, di fastɛns dɛn ɛn di kɔndishɔn dɛn we dɛn dɔn instɔl fɔ di rial prɔjek.

Yu tink se wud gren PVC fom bod nɔ de faya?

Di prodak data we de naw se di matirial we dɛn dɔn tɛst de kil insɛf insay lɛs dan 5 sɛkɔn. Dɛn fɔ jɔs tɔk bɔt wan patikyula faya retinj afta dɛn dɔn kɔnfɔm di tɛst standad we dɛn kin yuz, di bod gred, di density ɛn di tiknɛs.

Yu tink se PVC fom bod kin kot en CNC rout?

Yɛs. Suitabl PVC fom bod kin saw, kɔt, rout, drɔ, panch ɛn sand. Tulin ɛn prɔses paramita dɛn fɔ mach to di bod tik, dɛnsiti ɛn di edj kwaliti we dɛn nid.

Yu tink se dɛn kin print wud gren PVC fom bod?

Print na wan pan di aplikeshɔn dɛn we dɛn rayt. Bikɔs print adhesion ɛn apinans dipen pan di ɛksaktɔ surface finish ɛn ink sistem, tɛst wan aktual bod sampul bifo mas prodakshɔn.

Yu tink se dɛn kin mek di wud gren kɔlɔ we yu want?

Dɛn dɔn rayt di kɔlɔ ɛn dimɛnshɔn dɛn we dɛn mek fɔ yu lɛk aw dɛn de. Gi di wud gren dizayn we yu nid, kɔlɔ rɛfrɛns, glos lɛvɛl, tik, dɛnsiti ɛn kwantiti we yu de aks fɔ kot.

Yu kin yuz PVC fom bod na do?

Di prodak infɔmeshɔn we de naw de tɔk bɔt aw fɔ yuz di wɔl-bɔd na do, bɔt aw fɔ fit na do dipen pan UV ɛksplɔshɔn, kɔlɔ stebiliti, fɔmyulashɔn, klaymat ɛn instɔleshɔn. Kɔnfɛm wan aprɔpriet ɔda-grɛd spɛsifikɛshɔn bifo yu yuz am na do.

Wetin na di MOQ?

Di prodak spesifikeshɔn we de naw de list wan minim ɔda kwantiti we na 3 tan.

A kin aks fɔ sampul?

Di infɔmeshɔn bɔt di prɔdak we de naw de tɔk se sɛmpul dɛn de. Kɔnfɛm di tik we yu nid, di density, di wud gren finish ɛn di kɔriɔ arenjmɛnt bifo yu ship am.

Wetin na di tipik prodakshɔn lida tɛm?

Di prodak infɔmeshɔn we de naw de list lɛk 15–20 dez afta dɛn dɔn put am, i dipen pan di tik, density, finish, ɔda kwantiti ɛn prodakshɔn schedule.

Us infɔmeshɔn a fɔ gi fɔ kot?

Gi di aplikeshɔn we dɛn nid, tiknes, dɛnsiti, sheet matirial saiz, wud gren dizayn, kɔlɔ, sɔfayz finish, prɔsesin we, kwantiti, ples fɔ go ɛn ɛni tɛknikal ɔ faya-pɔfɔmɛnshɔn dɔkyumentri we dɛn nid.

Rikwest Wud Greyn PVC fom bod Prayz

Bɔt HSQY Plastik Grup

HSQY Plastic Group de saplae PVC fom bod ɛn ɔda plastic sheet matirial matirial to intanashɔnal B2B kɔstɔma dɛn fɔ fɔnicha, kabinɛt, sayn, printin, displei ɛn intɛriɔ aplikeshɔn.

HSQY de wok wit di wan dɛn we de mek fɔnicha, di wan dɛn we de mek kabinɛt, di wan dɛn we de mek sayn, di wan dɛn we de mek, di wan dɛn we de sheb ɛn di intɛriɔ kɔntrakta dɛn we nid standad ɔ kɔstɔmayz bɔd spɛsifikɛshɔn dɛn.

Fɔ wud gren PVC fom bod projɛkt, gi di tik, dɛnsiti, sheet matirial dimɛnshɔn we dɛn nid, finish, prɔsesin we, kwantiti ɛn ples fɔ go so dat dɛn go kɔnfɔm di rayt spɛsifikɛshɔn ɛn kot.

Kontakt HSQY fɔ Sampul ɛn Prayz

Bifo:

Nɛks: