PP we gɛt ay transparent
Fɔ bayer dɛn we de prayoritayz prodak visibiliti we dɛn de kip wan PP kɔnstrɔkshɔn.
Kɔnfɛm: haz, glos, kɔlɔ ɛn fɔm-pat apinans.
POLYPROPYLENE SHEET DI WAN WE DE MEK
Polipropilɛn (PP) Shit fɔ Tɛmofɔmin, Pakɛj & Fabrikeshɔn
Sos PP sheet matirial insay rol ɔ kɔt fɔmat wit di kɔlɔ, sɔfa ɛn fɛnshɔnal gred we mach to yu fɔm, fɔl, print ɔ industrial prɔses.
DI KWƐK ANSA
Wetin na polipropilɛn sheet matirial ?
Polipropilɛn sheet matirial na rigid ɔ sɛmi-rigid sheet matirial stok we dɛn mek wit PP tɛmplastik rɛsin. Dɛn kin kɔmɔn fɔ evalyu am fɔ thermoformed pakej, steshɔnari, layna, patishɔn, ilɛktrik pak ɛn fabricated kɔmpɔnɛnt usay lɔw wet, mɔstɔ resistans, kemikal kɔmpatibiliti ɔ tayla sɔfays kin yusful.
PP na matirial famili, nɔto wan spɛsifikɛshɔn we dɔn dɔn. Rεsin gred, kכnstrכkshכn, tiknes, kכla, sכfayz tritmεnt, aditiv, rol jכmetri εn dכwnstrim prכsεsin כl de afekt di fainal risכlt εn dεn mכst kכnfכm pan di intended sheet matirial .
GRƐD & SƆFƐS SƐLƐKTƆ
Start wit di wok we yu nid—nɔto jɔs tik
Pik wan kategori fɔ mek di sampul smɔl. Fɔnshɔnal lɛbl dɛn nid fɔ gɛt difayn gred, tɛst we ɛn rayt akseptans krayteria.
PP we gɛt kɔlɔ
Natural, wayt, blak ɔ projɛkt kɔlɔ fɔ steshɔnari ɛn pat dɛn we dɛn mek.
Kɔnfɛm: kɔlɔ rɛfrɛns, opasiti, lɔt tolɛreshɔn ɛn finish.Tekstur PP we gɛt di taytul
Frɔst ɔ patɛn sɔfays we fil, difyushɔn ɔ skrach apinɛns impɔtant.
Kɔnfɛm: tɛkstɔr kɔd, wan/tu-sayd finish ɛn ɔriɛnteshɔn.Antistatik PP
Wan funkshɔnal opshɔn fɔ ilɛktroniks ɛn fɔ handle program dɛn wit ilɛktrik target.
Konfam: resistans rεnj, tεst kכndishכn, durashכn εn כl tu-sayd nid dεm.PP we nɔ de wam
Wan projɛkt-spɛsifi k gred fɔ aplikeshɔn dɛn wit difayn prɔsesin ɔ savis tɛmpracha.
Kɔnfɛm: tɛm, lod, tɛmpracha saykl ɛn tɛst we.Flame-retardant PP we nɔ de mek faya
Wan kɔntrol gred usay wan nem flammabiliti rikwaymɛnt na pat pan di drɔin.
Kɔnfɛm: standad, raytin, tiknɛs, kɔlɔ ɛn ripɔt validiti.KƆRƐNT PRODƆKT SƆTLIST
Kɔmpia 8 PP sheet matirial opshɔn dɛn
Ɛni kad de link to wan HSQY prodak we de naw. Verifay di avaylabl, kɔnstrɔkshɔn, tolɛreshɔn ɛn fɛnshɔnal dɔkyumentri na di prɔjek kot.
RƆL • FƆNKSHƆNAL GRED
Hɛt-rɛsistant PP shit Rol
Fɔ prɔjek dɛn we gɛt difayn tɛmpracha saykl ɛn tɛst rikwaymɛnt.
Luk di prɔdak
WAYT • TIN GƐJ
Tin Wait PP shit
Wan wayt sheet matirial opshɔn fɔ kɔnvɔshɔn, steshɔnari ɔ fabricated-pat trayal.
Luk di prɔdak
KƆLƆR • MƆLTI-TIKNƐS
Polipropilɛn Sheet we gɛt kɔlɔ
Tik ɛn kɔlɔ dɛn we dɛn dɔn pik fɔ mek dɛn gri fɔ si ɛn fɔ mek dɛn mek am.
Luk di prɔdak
FROSTED • TRANSLUSƐNT
Frɔst Klia PP shit
Wan difyuz-sɔfa opshɔn fɔ fɔlda, kɔva ɛn fabrik kɔmpɔnɛnt dɛn.
Luk di prɔdak
FƆNKSHƆNAL • FLƐM RƐTADƐNT
Klir Flɛm-rɛtardant PP shit
Kɔnfɛm raytin, standad, tiknɛs, kɔlɔ ɛn kɔrɛnt sɔpɔt ripɔt.
Luk di prɔdak
0.4 MM • SMƆL TƆK: FROSTED
0,4 mm Frɔst PP shit
Wan tin frɔst sheet matirial fɔ kris, kɔt, fold ɛn apia tɛst.
Luk di prɔdak
0.3 MM • 500 MM WIDTH
Wait PP shit in 500 mm Width
Wan difayn tin-gej fɔmat fɔ layn ɛn dɔn-pat validɛshɔn.
Luk di prɔdak
NATURAL • 0.5 MM we yu de yuz
0,5 mm Natura PP shit
Wan natura PP sheet matirial fכ fכm, fold εn fabricated-part sampling.
Luk di prɔdakAPPLIKƐSHƆN RƆUTIN
Match PP sheet matirial to di finish-yuz kɔndishɔn dɛn
Tɛl di spɔlayt aw di sheet matirial go kɔnvɔyt, yuz ɛn aksept so di sampul go sho di rial prɔjek.
Pak we dɛn mek wit tɛmɔfɔm
Sheb di tre ɔ pak drɔin, mold dip, layn limit, pak prodak, ɔt kɔndishɔn ɛn siling sistɛm.
Validate: sag, fɔm winda, wɔl distribyushɔn, flɛnch ɛn trim.Steshɔnari & folding prodakt dɛn
Difayn sheet matirial saiz, kɔlɔ, tɛkstɔr, kris dairekshɔn, hinj saykl, print eria, wɛld ɔ kloz ditil.
Validate: kris, fold waytin, hinj, ink ɛn dimɛnshɔnal stebiliti.Industrial & kemikal yus
Gi di kemikal, kɔnsɛntreshɔn, tɛmpracha, kɔntakt tɛm, strɛs, fabrikeshɔn ɛn savis ɛnvayrɔmɛnt.
Validate: kompitibiliti pan di aktual gred—nɔ ɛva asum frɔm 'PP' nɔmɔ.Ilɛktronik tin dɛn we dɛn kin pak
Stet di rikwayd surface-resistance rεnj, test kondishכn, shelf layf, klin, fכm εn hεndl mεtכd.
Validate: ilɛktrik pefɔmɛns bifo ɛn afta fɔm ɔ stɔrɔj.Sheb di pat we dɔn dɔn ɛn di prɔsesin rod fɔ tɔk bɔt wan fayn PP sheet matirial sampul.
Tɔk bɔt Yu Aplikeshɔn
KƆNVƐTA CHƐKPOINT DƐN
PP nid fɔ gɛt wan prɔses-spɛsifi k trayal
Tɛrmofɔmin ɔt prɔfayl
PP kin bi sensitiv to hεtin bεlε εn sag. Test di wɛb wit we yu want, gej, mashin ɛn mold ɔnda ripɔt kɔndishɔn dɛn.
Printin & bond we yu de du
PP gɛt rili lɔw sɔfayz ɛnaji. Spɛsifik korona ɔ ɔda tritmɛnt ɛn validet ink, adeziv ɔ wɛldin kɔndishɔn dɛn na di fes we dɛn nominate.
Kot, kris & fold
Apruv tul jɔyometri, kris dip, fold dairekshɔn, edj kwaliti ɛn ripit hinj bihayvya pan di ɛksaktɔ tik ɛn tɛkstɔr.
Rol fidin & pak
Match yuzable width, kor, outa dayamita, rol weit, winding, edj kondishon en unloading method to di konvayt lain.
SPƐSIFIKƐSHƆN-FƆS RFQ
Send di data we yu nid fɔ wan kɔmparabl PP sheet matirial kot
If di gred nɔ disayd, sɛn di dɔn-prɔdakt drɔin, prɔsesin rod ɛn akseptans tɛst so dat dɛn go tɔk bɔt di rayt sɛmpul dɛn.
Fɔnkshɔn-grɛd not: Fɔd-kɔntakt, flame-ritardant, antistatik, kɔnduktiv ɛn tɛmpracha klem fɔ tay to wan nem gred, tik, tɛst we ɛn kɔrɛnt sɔpɔtin dɔkyumɛnt.
Send Yu PP shit Rikwaymɛnt dɛn
| RFQ fild | Wetin fɔ gi | Wetin mek i impɔtant |
|---|---|---|
| End yus | Finish prodak, savis envayrɔmɛnt ɛn akseptɛns tɛst | Fram gred sɛlɛkshɔn |
| Fɔmat | Rol ɔ kɔt sheet matirial ; lɔng × waid usay i apɔynt | Set di kɔnvɔyt ɛn pak rod |
| Mɛzhɔ | Nominal tik ɛn alaw tolɛreshɔn/prɔfayl | Afɛkt fɔm ɛn stiffness |
| Kɔlɔ & sɔfays | Aprɔv rɛfrɛns, opasiti, glos, frɔst ɔ tɛkstɔr kɔd | Difayn di akseptɛns we pɔsin kin si |
| Fɔnshɔnal gred | Pɔfɔmɛnshɔn target, di we aw dɛn de tɛst, di tɛm we dɛn fɔ tek ɛn di kɔndishɔn dɛn | I de mek dɛn nɔ tɔk bɔt tin dɛn we nɔ klia |
| Kɔnvɛnshɔn | Tɛmofɔm, kɔt, kris, fold, print, wɛl ɔ bond | Difayn sampul trayal dɛn |
| Rol jɔyometri | Kor ID, ɔta dayamita, rol wet/lɛngth ɛn wayndin | Mek shɔ se di layn kɔmpitibliti |
| Dokumɛnt dɛn | Destination market ɛn ɛksaktɔl diklareshɔn/ripɔt dɛn we dɛn nid | Sɔpɔt fɔ mek pipul dɛn fala di prɔjek |
| Biznɛs | Sampul nid, kwantiti, pak, ples fɔ go ɛn di de we dɛn want fɔ go | Prodyuz wan kot we yu kin yuz |
SAMPUL-TO-PRODUKSHƆN
Krio wan rayt aprɔval beslayn
Kip matirial, prɔses, kwaliti ɛn kɔmɛshɔnal ditil dɛn alaynɛd frɔm di fɔs sampul.
- 1
Wetin i min
Aplikeshɔn, drɔ, gred dairekshɔn, dimɛnshɔn ɛn tɛst.
- 2
Ɛgzampul
Riprɛzɛntiv rɛsin, gej, kɔlɔ, sɔfa ɛn rol fɔmat.
- 3
Chenj
Rɔn di aktual fɔm, print, fold ɔ fabrikeshɔn we.
- 4
Gri
Rikɔd di we aw i tan, di tolɛreshɔn, di pefɔmɛns, di pak ɛn di dɔkyumɛnt dɛn.
- 5
Ɔda
Kot ɛn prodyuz agens di apruv rayt spɛsifikɛshɔn.
FAQ WE YU DE BAY
PP sheet matirial sɔs kwɛstyɔn dɛn
Dairekt ansa fɔ pak kɔnvɔta, steshɔnari manifakta ɛn industrial bayer.
Aks wan kwɛstyɔn we gɛt fɔ du wit di prɔjekWetin dɛn de yuz PP sheet matirial fɔ?
PP sheet matirial de yuz insay thermoformed pakej, steshɔnari ɛn fɔlda, fabricated layna, patishɔn, ilɛktrik pak ɛn industrial kɔmpɔnɛnt. Suitability dipen pan gred, tiknes, surface, prɔsesin ɛn savis kɔndishɔn.
PP sheet matirial fit fo thermoforming?
di aprכpriet PP gred dεm de bכku tεmכfכm, bכt hεtin bεlε εn sag kכntrכl kin bi mכr sεnsitiv pas wit sכm כda sheet matirial mεtirial dεm. Validate di nominated gred pan di intended mashin ɛn mold bifo prodakshɔn.
Ɛvri PP sheet matirial fayn fɔ kɔntakt it?
Nɔ, yuz wan gred nɔmɔ we dɛn sɔpɔt fɔ di kayn it we yu want, di tɛmpracha, di kɔntakt kɔndishɔn ɛn di say we yu want fɔ go na di makit. Rikwest di aplikebul diklareshɔn ɔ tɛst dɔkyumɛnt fɔ di ɛksaktɔl ɔda kɔnstrɔkshɔn.
Wetin na di difrɛns bitwin natura, klia ɛn translucent PP?
Dɛn wɔd ya kin yuz difrɛn we bitwin di saplay dɛn. PP apinans de chenj bak wit rεsin, aditiv, surface tεkschur, tiknes εn prכsεsin. Difayn wan optik target ɛn apruv wan fizik kɔlɔ/apiɛns sampul.
Aw fɔ spɛsifa antistatik PP?
Stet di resistans rεnj, tεst standad, kondishכn, mεzjכmεnt kכndishכn, durashכn, fεs we dεn nid εn pεrformεns afta fכm כ stכrej. 'Antistatic' nɔmɔ nɔto akseptɛns krayteria.
Yu tink se PP sheet matirial kin print ɔ bon?
Yes, wit wan kompitibul matirial ɛn prɔses, bɔt PP gɛt rili lɔw sɔfayz ɛnaji. Kɔnfɛm sɔfayz tritmɛnt ɛn tɛst di ink, adeziv, wɛl ɔ lɛbl sistɛm pan di aktual gred ɛn nominated fes.
Us rol ditel dɛn nid fɔ kot?
Gi gej ɛn tolɛreshɔn, yuzabl wit, kɔr ID, maksimal ɔta dayamita, rol wet ɔ lɔng, wayndin dairekshɔn, edj rikwaymɛnt, kwantiti, pak ɛn layn-hanlin limit.
Us infɔmeshɔn a fɔ sɛn fɔ aks fɔ PP sheet matirial kot?
Send di ɛnd yus, rol ɔ kɔt- sheet matirial fɔmat, tik, dimɛnshɔn, kɔlɔ, sɔfa, kɔnvɔshɔn prɔses, fɛnshɔnal target, kwantiti, pak rikwaymɛnt, dɛstineshɔn ɛn di dɔkyumɛnt dɛn we dɛn aks fɔ.
