Grin PVC Krismas Tri Film

Grin PVC Krismas Tri Film fɔ Atikul Lif

HSQY de mek grɛn PVC Krismas tik fim fɔ atifishal tik lif, pain nidul, krawn, garland, fɛns gras ɛn sizin dɛkɔreshɔn. Di fim we dɛn kɔl PVC kin kɔstɔmayz insay grɛn shed, tik, waid, sɔfayz tɛkstɔr, stiffnɛs, risaykul kɔntinyu ɛn rol pak fɔ mach atifishal Krismas tik prodakshɔn ikwipmɛnt.

Standart lif-film projɛkt dɛn kin yuz tin, fleksibul-to-sɛmi-rigid gred dɛn we dɛn kin slit, kɔt, drɔ insay nidul ɛn twist rawnd waya. Tik ɛn stif PVC gred dɛn kin divɛlɔp fɔ atifishal gras fɛns, dɛkɔretiv strip ɛn ebi-duti fɔlia aplikeshɔn.

PVC Krismas Tri Film Vidio

Grin PVC Krismas Fim Imej dɛn

Wetin Na PVC Krismas Tri Fim?

PVC Krismas tik fim na wan kɔlɔ kalenda fim we dɛn mek fɔ mek atifishal lif. Dɛn kin gi di fim insay masta rol ɔ slit rol, dɔn dɛn kin put am insay ikwipmɛnt fɔ drɔ lif, kɔt ɔ tay branch fɔ mek flat lif, pain nidul, sida stayl tip ɛn dɛkɔretiv lif.

we yu kompare wit injεkshכn-mold PE nidul dεm, PVC film de gi wan kכst-εfεktiv we fכ prodyuz dense branch tip dεm εn ay-vכlyum atifishal tik dεm. bכku manifakta dεm kin kכmbayn PVC insay fכliεj wit mold PE כta tip dεm fכ bεlεn ful, apinεns εn prodakshכn kכst.

Grin PVC Krismas Tri Film Spɛsifikeshɔn dɛn

Aw fɔ Pik PVC Film Tiknɛs

Tiknes fɔ pik togɛda wit PVC fɔmyulashɔn, stiffness, lif wit, branch waya, kɔt patɛn ɛn mashin spid. Fim we tik, nɔ kin mek tik we luk fayn fɔ insɛf.

Virgin ɛn Risaykul PVC Gret Opshɔn dɛn

Nɔ yuz diskripshɔn we nɔ klia lɛk 'A, B, C ɛn D gred' we yu nɔ difayn risaykul pasɛnt, raw-matirial sɔs ɛn akseptans krayteria. Di wan dɛn we de bay nid fɔ gɛt fɔmyulashɔn we dɛn kin mɛzhɔ ɛn rɛfrɛns sampul we dɛn dɔn gri fɔ.

Ki Bɛnifit dɛn fɔ PVC Krismas Tri Fim

PVC Krismas Tri Film Aplikeshɔn dɛn

Krismas Tri Lif Prodakshɔn Prɔses

PVC fim pefɔmɛns fɔ mach to di kɔmplit atifishal-tri prodakshɔn layn. Wan fim we luk lɛk se i akseptabl na di rol kin stil brok, kɔl ɔ prodyuz lif dɛn we nɔ ivin we di prodakshɔn spid.

Kɔlɔ, Tɛkstɔr ɛn Rol Kastamayzeshɔn

Di wan dɛn we de mek atifishal tik dɛn kin nid mɔ pas wan grɛn kɔlɔ fɔ mek dip dip ɛn fɔ mek i nɔ tan lɛk wan. HSQY kin mach wan fizik kɔlɔ sampul, Pantone rɛfrɛns ɔ aprɔv prodakshɔn rol.

Flame-Retardant PVC Krismas Fim we nɔ de mek faya

PVC dεn kin dεskrεb am bכku tεm se i de fכm insεf, bכt wan atifishal tik כ dεkכreshכn nכ fכ advatayz as fεm-retardant bays כnli pan di polimכr nem. Faya pefɔmɛns chenj wit plasticizers, stabiliza, pigmɛnt, risaykul kɔntinyu, tik, waya, flɔk, layt ɛn di kɔmplit prodak kɔnstrɔkshɔn.

UV ɛn Ɔda Wɛda Rikwaymɛnt dɛn

Standard Krismas tik fim na in dɛn kin yuz mɔ fɔ dekɔret insay sizin. Ɔda fɛns gras, land skay ɛn ɛksplɔz dɛkɔreshɔn nid fɔ gɛt UV-stabiliz fɔmyulashɔn ɛn wan gri fɔ wɛda target.

Kwaliti ɛn Kɔmplians Rikwaymɛnt dɛn

Di kemikal ɛn prodak-sefty dɔkyumɛnt dɛn we dɛn nid dipen pan di kɔntri we dɛn de go, di ritayla ɛn di ɛnd-prɔdak spɛsifikɛshɔn. Jɛnɛral ISO ɔ SGS sɛtifiket dɛn nɔ de pruv ɔtomɛtik wan se dɛn de fala fɔ ɛvri atifishal tik.

Kwaliti Kɔntrol fɔ PVC Krismas Fim

Pakɛj ɛn Delivri

Sɛtifiket dɛn

Rikwest sɛtifiket ɛn tɛst ripɔt we de sho di rayt prodak gred, fɔmyulashɔn, tik, kɔlɔ ɛn say we dɛn mek am. Sɛtifiket imej nɔ fɔ tek ples fɔ di tɛknikal spɛsifikɛshɔn ɔ batch inspekshɔn ripɔt we dɛn dɔn gri fɔ.

HSQY na Globɛl Ɛgzibishin dɛn

Prodakshɔn ɛn Pak

Infɔmeshɔn we Yu nid fɔ gɛt Kɔrɛkt Kɔt

1. Ɛnd prodak: Stet Krismas tik lif, krawn, garland, fɛns gras ɔ ɔda aplikeshɔn.

2. Tik: Gi di film gej we yu nid ɛn akseptabl tolɛreshɔn.

3. Wid: Gi masta-rɔl ɔ slit-rɔl wit, wit tolɛreshɔn ɛn ed-kwaliti rikwaymɛnt.

4. Kɔlɔ: Sɛnd wan fizik sampul, Pantone nɔmba ɔ apruv kɔlɔ rɛfrɛns.

5. Surface: Kɔnfɔm mat, glos, smol, ɛmbos ɔ ɔda tɛkstɔr.

6. Matirial gred: Stet vayjin PVC , risaykul pasɛnt, ɔda tin dɛn we de smɛl ɛn aw fɔ luk.

7. Fɔnkshɔn rikwaymɛnt: Gi flame-retardant, UV, kol-rɛsistɛns ɛn kemikal-kɔmplians standad.

8. Mashin ditel: Gi lif-mek mashin tayp, fid wit, spid ɛn kɔrɛnt film sampul.

9. Rol konfigyushɔn: Kɔnfɔm kɔr, rol wet, rol dayamita, wayndin dairekshɔn ɛn pak.

10. Kɔmishɔn ditil: Gi trial kwantiti, ɛni ia dimand, dɛstineshɔn pɔt ɛn di de we dɛn nid fɔ sɛn am.

Kwɛstyɔn dɛn we Dɛn Kin Aks Bɔku tɛm

Wetin dɛn kin yuz grɛn PVC Krismas tik fim fɔ?

Dɛn kin yuz am fɔ mek atifishal Krismas tik lif, pain nidul, krawn, garland, atifishal lif, gras wɔl ɛn dɛkɔretiv fɛns strip.

Us tik we fayn fɔ mek atifishal Krismas tik lif dɛn?

di tin lif gred dεm kin kכmכn frכm lεk 0.07mm to 0.15mm. Di kɔrɛkt gej de dipen pan di lif saiz, stiffness, mashin spid ɛn di tik ful we yu want.

Wetin mek di pej we de naw de list tiknes dɛn we go rich 1.2mm?

Tik PVC gred kin yuz fɔ atifishal fɛns strip, ebi gras ɛn spɛshal dɛkɔretiv kɔmpɔnɛnt dɛn. Dɛn jɔs nɔto standad fayn Krismas tik lif fim dɛn.

HSQY kin kɔstɔmayz di grɛn kɔlɔ?

Yɛs. HSQY kin mach layt grɛn, pain grɛn, dak grɛn, ɔliv, brawn ɛn ɔda kɔlɔ dɛn we yu yuz wan aprɔv sampul ɔ kɔlɔ rɛfrɛns.

Yu tink se mat ɛn ɛmbos sɔfays dɛn de?

Yɛs. Wi kin tɔk bɔt mat, sɛmi-mat, glos, smol ɛn ɛmbos sɔfays dɛn. Tekstɔr fɔ tɛst pan di aktual lif-prɔdakshɔn layn.

Yu tink se dɛn kin saplae di PVC fim insay smɔl smɔl slit rol dɛn?

Yɛs. Gi di fid wit we yu nid, tolɛreshɔn, kɔr dayamita, di rol wet ɛn di wayndin dairekshɔn so dat di rol go mach di mashin we de mek lif.

Na PVC Krismas tik fim nɔ de mek faya?

Flame-retardant fɔmyulashɔn dɛn de, bɔt dɛn fɔ kɔnfyus di pefɔmɛns yuz di tɛst standad we dɛn nid ɛn ripɔt fɔ di ɛksaktɔ tik, kɔlɔ ɛn fɔmyulashɔn.

Yu tink se dɛn kin yuz di fim na do?

Standard Krismas fim na men wan fɔ yuz insay sizin. Di projɛkt dɛn we de na do fɔ yuz wan UV-stabilized gred we dɛn validet fɔ di klaymat ɛn savis layf we dɛn de ɛkspɛkt.

Risaykul PVC de?

Yɛs. Dɛn kin mek vajin/risaykul blɛnd dɛn. Spɛsifik di pasɛnt we dɛn risaykul ɛn di tin dɛn we dɛn nid fɔ di kɔlɔ, smel, tɛnsiɛl trɛnk, flaym pefɔmɛns ɛn tin dɛn we dɛn nɔ gri fɔ.

Yu tink se PVC Krismas fim kin risaykul?

PVC na teknikal risaykul, bɔt di aktual risaykul dipen pan lokal kɔlɛkshɔn, aditiv, waya, layt, flɔk ɛn separeshɔn fɔ di dɛkɔreshɔn we dɔn dɔn.

Wetin kin mek PVC fim brok pan mashin we de mek lif?

di tin dεm we kin kכz dεm na we i nכ de lכng infεkt, i stiff pasmak, i tεmprachכ lכw, i nכ stebul tik, di slit ed dεm we dεn dכn damej, di hεy wεb tεnshכn כ wan kכt sεtup we nכ fayn.

Wetin kin mek PVC lif dɛn kɔl?

di kכl kin kכmכt frכm di shrinkage we nכ bεlε, di strεs we de waynd, tεmprachכ fכ stכrej, fכmyuleshכn, tiknes vεryushכn כ di kכt εn twistin prכsεs.

HSQY kin mach mi kɔrɛnt PVC fim sampul?

Yɛs. Send wan kɔrɛnt film rol ɔ finish lif sɛmpul fɔ kɔlɔ, tik, stiffnɛs, sɔfa, tɛnsiɛl ɛn mashin-pɔfɔmɛnshɔn ɛvalueshɔn.

Us kɔmplians infɔmeshɔn di wan dɛn we de import fɔ gi?

Stet di dɛstineshɔn makɛt, ritayla spɛsifikɛshɔn, ristrikt sɔbstans, phthalate limit, flame tɛst, risaykul-kɔntinɛnt rikwaymɛnt ɛn lɛbul lɔ dɛn.

A kin aks fɔ trial rol?

Dɛn kin tɔk bɔt di trayal sɛmpul dɛn afta we HSQY dɔn gɛt di tik, di wit, di kɔlɔ, di sɔfa, di mashin ɛn di tin dɛn we dɛn nid fɔ du.

Wetin na di MOQ?

Di prodak pej we de naw de list wan MOQ we na 1,000kg. Kastom kɔlɔ, narrow slitting, risaykul blɛnd ɛn flame-retardant gred kin afɛkt di fayn MOQ.

Aw a go gɛt kɔrɛkt kot?

Send di aplikeshɔn, tiknes, wit, kala sampul, finish, matirial gred, funkshɔn standad, mashin ditel, rol kɔnfigyushɔn, kwantiti ɛn dɛstineshɔn pɔt.

Wetin Mek Yu Pik HSQY as Yu PVC Krismas Fim Splaya?

HSQY Plastik Grup de saplae PVC film, PET sheet matirial s, PP sheet matirial s ɛn kɔstɔmayz plastic matirial to intanashɔnal manifakta dɛn. Fɔ atifishal-tri projɛkt, HSQY de sɔpɔt kɔlɔ maching, fɔmyulashɔn ajɔstmɛnt, ɛmbos, narrow slitting, sampul trayal, ɛkspɔt pak ɛn kɔntena lod.

Di divɛlɔpmɛnt prɔses we dɛn kin abop pan pas ɔl na fɔ sɛn di fim sampul we de naw, di lif we dɔn dɔn ɛn di mashin infɔmeshɔn. Dɔn HSQY kin ebul fɔ evalyu tik, stiffnɛs, tɛnsiɛl pefɔmɛns, risaykul kɔntinyu, flaym rikwaymɛnt ɛn rol dimɛnshɔn togɛda.