Frosted PVC Sheet HS007 fɔ Pakɛj & Blista

Frosted PVC Sheet HS007 fɔ Pakɛj ɛn Blista

HSQY Frosted PVC Sheet HS007 na transparent PVC matirial wit mat tɛkstɔr sɔfays fɔ pak kɔnvɔshɔn, blista aplikeshɔn, printin ɛn fɔl bɔks. Di frosted finish de gi wan soft vijual apinans pas kɔvɛnshɔnal smol glossy klia PVC we i de mentɛn visibiliti tru di matirial.

Di ditayl tiknes rεnj na 0.10mm to 2mm. Standart shit saiz dɛn inklud 700 × 1000mm, 750 × 1050mm, 915 × 1830mm ɛn 1220 × 2440mm, wit kɔstɔmayz dimɛnshɔn dɛn we de akɔdin to di prodakshɔn rikwaymɛnt dɛn.

Fɔ pak kɔnvɔta, blista manifakta, printa, fɔl-bɔks prodyusɔ ɛn distribyushɔn, impɔtant sɛlɛkshɔn tin dɛn inklud sheet tik, dimɛnshɔn, mat sɔfays tɛkstɔr, flatnɛs ɛn kɔmpatibiliti wit printin, kɔt, skɔring, fold ɔ fɔm prɔses.

Frosted PVC Sheet Prodakt Vidio

Wetin Na Frosted PVC Shit HS007?

Frosted PVC sheet na transparent ɔ translucent polyvinyl klorayd matirial wit tɛkstɔr mat sɔfays. We yu kɔmpia am wit polish klia PVC, di frɔst finish de mek i luk saf ɛn i de ridyus strɔng dairekt sɔfays riflɛkshɔn.

HS007 fayn fɔ pak ɛn kɔnvɔshɔn aplikeshɔn dɛn we inklud blista prodak, fɔlding bɔks ɛn print plastic kɔmpɔnɛnt usay dɛn nid fɔ luk we nɔ glos transparent.

Di matirial kin kɔt, drɔ ɛn fɔm akɔdin to di tik we dɛn pik ɛn di tin dɛn we dɛn nid fɔ mek di prɔdak we dɔn dɔn. Di kɔndishɔn fɔ prosɛs fɔ mach to di aktual prodakshɔn ikwipmɛnt ɛn kɔnvɔshɔn we.

Frosted PVC Sheet HS007 Spesifikasi

Lid Taym

Prodakshɔn tɛm fɔ kɔnfɔm akɔdin to tik, shit dimɛnshɔn, kwantiti ɛn fayn ɔda rikwaymɛnt.

Teknik Dokumɛnt dɛn

PVC Klia Shit Data Sheet.pdfPVC Sheet Test Ripɔt.pdf

Ki ficha dɛn fɔ Frosted PVC Sheet HS007

Frosted Matte Surface: Di textured surface de gi wan soft, non-glossy apinans we yu kɔmpia am wit kɔvɛnshɔnal smol smol klia PVC.

Gud Strɔng ɛn Taf: Di PVC matirial fayn fɔ kɔmpitabl pak ɛn kɔnvɔshɔn prɔses we nid fɔ gɛt strɔkchɔ plastic shit.

Klin Sɔfays: Dɛn kin mek di matirial fɔ avɔyd kristal pɔynt dɛn we pɔsin kin si, ripɛl ɛn sɔfays dɔti.

Gud Surface Flatness: Flatness de sɔpɔt stebul handel we yu de print, kɔt, skɔ, fold ɛn fɔm ɔpreshɔn.

Yunifɔm Tiknɛs: Kɔnsistɛns tiknɛs de sɔpɔt mɔ stebul prɔsesin akɔdin to pak ɛn printin aplikeshɔn dɛn.

Yunifɔm Sand Tɛkschɔ: Wan kɔnsistɛns mat tɛkstɔr de ɛp fɔ mek di say we di sheet tan lɛk di sem we.

Frosted PVC Sheet fɔ Blister Pakɛj

Blista pak na wan pan di men aplikeshɔn fɔ HS007. Di matirial kin evaluet fɔ fɔm pak prodak usay bayer dɛn nid PVC prɔsesin kwaliti togɛda wit frɔst ɔ mat sɔfays.

Fכ blista kכnvכshכn, di tik we dεn sεlekt fכ mach wit di fכm ikwipεshכn, mold jכmetri εn finish pak strכkchכ. Di aktual matirial fɔ evalyu ɔnda di prodakshɔn kɔndishɔn dɛn we dɛn bin want fɔ mek.

Frosted PVC Sheet fɔ Folding Bɔks dɛn

Folding boxes na wan ɔda listed aplikeshɔn fɔ HS007. Transparent frosted PVC kin gi prodak visibiliti togɛda wit wan sɔft surface apinans pas kɔvɛnshɔnal glossy transparent pak.

Tiknes fɔ pik akɔdin to di bɔks dimɛnshɔn, rigiditi we dɛn nid ɛn di we aw dɛn want fɔ kɔt, skɔ ɛn fold.

Frosted PVC Sheet fɔ Print

Printin na aplikeshɔn bak fɔ HS007 frosted PVC sheet. Di mat sɔfays de prodyuz difrɛn vijual ifɛkt frɔm smol glos PVC, so dɛn fɔ evaluate kɔmpatibiliti yuz di ink ɛn printin ikwipmɛnt we dɛn want.

Impɔtant prodakshɔn factors inklud sheet flatness, tiknes kɔnsistɛns, surface tɛkstɔr ɛn ɛni dawɔnstrim kɔt, fold ɔ fɔm prɔses we dɛn du afta dɛn print.

Di Tin dɛn we Yu fɔ Tink bɔt fɔ Kɔnvɔshɔn fɔ Pakɛj

Prodakt Aplikeshɔn Fɔto dɛn

Pepa

Fɔ prɔjek dɛn we nid spɛshal tɛst ɔ kɔmplians dɔkyumɛnt, duya kɔnfɔm di dɔkyumentri we apɔynt to di ɛksaktɔ PVC shit spɛsifikɛshɔn we de insay di ɔda.

HSQY Plastik Grup Intanɛshɔnal Ɛgzibishin dɛn

Prodakshɔn ɛn Pak

Aw fɔ Pik Frosted PVC Sheet

Kɔnfɔm Tiknɛs: Sɛlekt insay di ditayl 0.10mm to 2mm rɛnj akɔdin to di fleksibiliti, rigiditi ɛn pak prɔses we yu nid.

Pik Shit Dimɛnshɔn: Pik wan standad shit saiz ɔ spɛsifa kɔstɔmayt dimɛnshɔn akɔdin to day-kat, printin ɔ fɔm layout.

Kɔnfɛm di Frɔst Sɔfays: Difayn di balans we yu nid bitwin transparency ɛn mat apinans yuz di pakej we dɔn dɔn as di rɛfrɛns.

Difayn di Kɔnvɛnshɔn Prɔses: Spɛsify if di sheet go print, kɔt, skor, fold ɔ fɔm.

Gi Kwantiti ɛn Di Destineshɔn: Put di kwantiti we yu bay ɛn di say we yu de sɛn am we yu de aks fɔ kot.

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt Frosted PVC Sheet HS007

Wetin na Frosted PVC Shit HS007?

HS007 na PVC mat shit wit transparent ɔ translucent frosted surface fɔ blista pak, foldin bɔks, printin ɛn kɔmpitabl plastic kɔnvɔshɔn aplikeshɔn.

Us tiknɛs rɛnj de?

Di ditel spesifikeshɔn list tiknes frɔm 0.10mm to 2mm.

Us standad saiz dɛn de?

Standart saiz dɛn inklud 700 × 1000mm, 750 × 1050mm, 915 × 1830mm ɛn 1220 × 2440mm.

Yu tink se dɛn kin gi yu kɔstɔm sheet saiz dɛn?

Yɛs. Wi kin tɔk bɔt di wayd, lɔng ɛn shep akɔdin to di tin dɛn we dɛn nid fɔ mek.

Yu kin yuz HS007 fɔ pak blista?

Yɛs. Blister na wan pan di aplikeshɔn dɛn we dɛn rayt. Dɛn fɔ ebul fɔ no if i fayn bay we dɛn yuz di ikwipmɛnt we dɛn want fɔ mek, di tik we dɛn dɔn pik ɛn di dizayn we dɛn dɔn mek fɔ di blista.

Yu tink se dɛn kin yuz frɔst PVC sheet fɔ fold bɔks?

Yɛs. Fɔl bɔks na aplikeshɔn we dɛn rayt. Tiknes fɔ pik akɔdin to di bɔks strɔkchɔ ɛn di we aw dɛn want fɔ kɔt, skɔ ɛn fold.

Yu tink se dɛn kin print Frosted PVC Sheet HS007?

Yɛs. Print na wan pan di aplikeshɔn dɛn we dɛn rayt. Di wan dɛn we de bay fɔ yuz di ink ɛn di tin dɛn we dɛn want fɔ print fɔ no if dɛn kɔmpit.

Wetin na di difrɛns bitwin frɔst ɛn glos PVC?

Frɔst PVC gɛt tɛkstɔr mat sɔfays ɛn sɔft vijual apinans, we glos klia PVC gɛt smol polish sɔfays wit mɔ dairekt klia.

Yu tink se di sheet gɛt yunifom sɔfays tɛkstɔr?

Yunifɔm san tɛkstɔr ɛn gud sɔfa fil de insay di HS007 prodak kwaliti dɛn.

HS007 geht gud sheet flatnes?

Gud surface flatness ɛn yunifom tiknes de inklud bitwin di prodakt kwaliti dɛn.

Us kɔlɔ dɛn de?

Klia ɛn ɔda kɔlɔ dɛn de. Dɛn fɔ kɔnfɔm di patikyula kɔlɔ dɛn we dɛn nid we dɛn de aks fɔ kot.

Yu tink se dɛn kin kɔt ɔ drɔ di sheet?

Di matirial kin kɔt ɛn drɔ fɔ kɔmpitabl aplikeshɔn dɛn. Tul ɛn prɔsesin kɔndishɔn fɔ pik akɔdin to tik.

Yu tink se dɛn kin mek frɔst PVC sheet?

Di matirial kin fɔm fɔ kɔmpitabl aplikeshɔn dɛn. Fɔm kɔndishɔn dɛn fɔ evalyu akɔdin to di tik we dɛn pik ɛn di jɔyometri we dɛn dɔn dɔn.

Wetin na di minimum ɔda kwantiti?

Di listed minimum oda kwantiti na 1000kg.

Wetin na di lida tɛm?

di lid-taym tebul de gi 7 de fכ 1–3000kg, 10 de fכ 3001–10000kg, 15 de fכ 10001–20000kg εn nεgoshieshכn fכ kwantiti dεm we pas 20000kg.

Us infɔmeshɔn a fɔ gi fɔ kot?

Duya gi di tik we yu nid, di dimɛnshɔn fɔ di shit, di kɔlɔ, di aplikeshɔn, di we aw dɛn de print ɔ kɔnvɔshɔn, di kwantiti ɛn di say we dɛn de sɛn am.

Bɔt HSQY Plastik Grup

Changzhou Huisu Qinye Plastic Group Co., Ltd. gɛt pas 20 ia ɛkspiriɛns fɔ saplae PVC sheet, PET sheet kɔmpɔzit film ɛn ɔda plastic prodak fɔ pak, print, sayn ɛn industrial kɔnvɛnshɔn.

Di kɔmni de ɔpreshɔn fayv prodakshɔn layn dɛn wit 50 tan prodakshɔn kapasiti fɔ ɛvride ɛn dɛn de sav kɔstɔma dɛn na makit dɛn we inklud Spain, Itali, Jamani, di Amɛrika dɛn ɛn India.