120CM Width Supa Klir PVC Tebul Kova Rols

120cm Supa Klar PVC Tebul Kova Rols

HSQY de mek 120cm-wayd supa klia PVC tebul kɔva rol fɔ it tebul, ɔfis dɛsk, risepshɔn kɔnta, kɔfi tebul, ɔtel fɔnicha, rɛstɔrant tebul, bankwet tebul ɛn ɔda say dɛn we dɛn protɛkt.

Di rol wit we dɛn sho na 120cm, we ikwal to 1.2 mita ɔ lɛk 47.2 inch. Dɛn kin evalyu di kɔstɔmayz wit frɔm lɛk 50mm to 2300mm fɔ di wan dɛn we de mek tebul klos, di wan dɛn we de mek fɔnicha-protɛkshɔn, di wan dɛn we de sɛl ɔlsay ɛn di wan dɛn we de gi ɔspitul.

Standart prodakt tiknes de frכm aprכksimatli 0.5mm to 7mm. Di tik we fit pas ɔl dipen if dɛn go yuz di matirial as fleksibul tebul klos fim, fit tebul protɛkta, dɛsk mat ɔ ebi ebi sɔft glas tebul kɔva.

Dɛn mek di gred dɛn we rili klia fɔ mek dɛn nɔ pwɛl di we aw wud gren, mabul, ston, glas, tebul klos we dɛn print ɛn di tin dɛn we dɛn de drɛs de luk, ɛn dɛn de ɛp fɔ protɛkt frɔm wata we de rɔn, stɛyn, skrach ɛn wear ɛvride.

Di opshɔn dɛn we de inklud nɔmal klia, supa klia, blu-tint klia, mat, frɔst, ɛmbos, print ɛn kɔstɔmayz kɔlɔ fleksibul PVC.

fכmulashכn dεm we nכ de sכmtεm sכmtεm, we nכ de fכt, UV-stεbyul, kol-rεsistεnt, anti-statik εn fכm we nכ de fכm fכ fכm dεn kin evaluate as sεparat grεd dεm. Dɛn prɔpati ya nɔ fɔ tek am fɔ standad klia PVC fim pas nɔmɔ dɛn put dɛn insay di spɛsifikɛshɔn we dɛn dɔn gri fɔ ɛn dɛn sɔpɔt dɛn wit di tɛst dɔkyumɛnt dɛn we dɛn kin yuz.

Eksplore di komplit HSQY PVC tebul kɔva film rɛnj fɔ ɔda tiknɛs, sɔfays ɛn kɔstɔm manufakchurin opshɔn dɛn.

Rikwest PVC Tebul Kɔva Prayz    Rikwest Klia PVC Sampul dɛn

Super Klir PVC Tebul Kova Vidio

Wach di vidio dɔŋ ya fɔ lan mɔ bɔt HSQY supa klia PVC tebul kɔva rol dɛn, tiknɛs dɛn we de, wit dɛn, sɔfayz opshɔn dɛn ɛn fɔnicha-protɛkshɔn aplikeshɔn dɛn.

Wetin Na Supa Klia PVC Tebul Kɔva Rol?

Wan supa klia PVC tebul kɔva rol na wan fleksibul, plasticized polyvinyl klorayd matirial we dɛn mek wit wan smol transparent sɔfays.

Yu kin kɔt di rol insay rɛktangul, skwea, sɛkɔral, ɔval ɔ kɔstɔmayz protɛkta fɔ tebul, dɛsk, kɔnta ɛn fɔnicha sɔfays.

Fleksibul PVC gɛt plasticizers ɛn ɔda fɔmyulashɔn kɔmpɔnɛnt dɛn we de disayd in saf, klia, smel, kol rɛsistɛns, ɔt bihayvya, blɔk rɛsistɛns ɛn lɔng tɛm dimɛnshɔnal stebiliti.

Tin tebulklɔt fim de drɛp oba wan tebul ed, we tik transparent PVC de biev mɔ lɛk sɔft protɛktiv mat ɛn nɔmal wan i de kɔntinyu fɔ de na di tebul.

Dɛn kin kɔl di matirial bak as klia vaynil tebul kɔva, sɔft glas tebul protɛkta, transparent PVC tebulklɔt, klia dɛsk mat, fleksibul PVC shit ɛn plastic tebul protɛkta rol.

Super Klir PVC Tebul Kova Imej

Super Klir PVC Tebul Kova Spesifikasi

Faynal tiknɛs tolɛreshɔn, wit tolɛreshɔn, rol lɔng, hadnɛs, transparency, kɔlɔ, ɔda, shrinkage, sɔfa, plastizayza sistɛm ɛn kɔmplians rikwaymɛnt fɔ kɔnfɔm insay wan aprɔv rayt spɛsifikɛshɔn.

Aw fɔ Pik di Rayt PVC Tebul Kɔva Tiknɛs

Tiknes rεkomεndεshכn na jεnarכl gaydlain. Finish pefɔmɛns dipen bak pan di hadnɛs, plasticizer kɔntinyu, tebul saiz, rum tɛmpracha, sɔfays tɛkstɔr ɛn if di protɛkta sɔpɔt along in ed dɛn.

Nɔmal Klia vs. Supa Klia PVC

Tɛm dɛn lɛk klia, kristal klia ɛn supa klia nɔ de difayn wan yunivasal ɔptik valyu. Di kɔstɔma dɛn we nid fɔ kɔntrol klia wan fɔ gri fɔ wan fizik sampul ɛn spɛsifa di haz, kɔlɔ ɛn vijual-distorshɔn rikwaymɛnt dɛn.

Glossy, Matte, Frosted ɛn Ɛmbos Surface dɛn

Dabl-Polish Klia Sɔfays

Wan say we dɛn dɔn polish tu tɛm de mek pɔsin ebul fɔ si am fayn fayn wan ɛn i de mek i tan lɛk glas smol smol na ɔl tu di say dɛn.

Mat Surface we de na di wɔl

Mat PVC de ridyus riflekshɔn, finga prɛnt ɛn visible air poket bɔt i de gi less dairekt klia pas wan polish sɔfays.

Frosted Surface we de na di wɔl

Frosted PVC de prodyuz wan translucent apinans ɛn dɛn kin yuz am we prayvet, difyushɔn ɔ ridyus sɔfa kɔntakt nid fɔ de.

Dɔst ɔ Anti-Blɔk Sɔfays

Wan layt dɔst tɛkstɔr kin ridyus blɔk bitwin rol layers ɛn impruv unwinding ɛn kɔnvɔyt pefɔmɛns.

Surface we dɛn dɔn ɛmbos

Ɛmbos patɛn kin gi wan dɛkɔretiv finish, impruv hanlin ɛn ridyus di visibiliti fɔ skrach ɛn trɔp ɛya.

Tebul Surface Kɔmpatibiliti

Sɛnsitiv pent, lak, print ɔ rifinish sɔfays dɛn fɔ tɛst bifo lɔng tɛm kɔntakt wit fleksibul PVC.

PVC Tebul Kɔva Shrinkage ɛn Sayz Alawɛns

Fleksibul PVC kin chenj dimɛnshɔn smɔl afta dɛn dɔn ɛkstrushɔn, rɔl, ship, ɔprɔl ɔ ɛksplɔz to tɛmpracha chenj.

Shrinkage dipen pan tik, manufakchurin tεnshכn, fכmyuleshכn, rol stכrej, rum tεmprachכ εn di dairekshכn fכ εkstrushכn.

Fɔ fit tebul protɛkta, dɛn fɔ alaw di rol fɔ aklimat ɛn le flat bifo dɛn kɔt am fayn fayn wan.

Baya dɛn we nid ɛksaktɔl dimɛnshɔn we dɔn dɔn fɔ difayn di akseptabl shrinkage ɛn gri pan wan kɔt alawɛns bays pan wan aprɔv prodakshɔn sampul.

Rili big ɔ lɔng protɛkta dɛn kin nid ɔda lɔng alawɛns bikɔs dimɛnshɔnal chenj dɛn kin mɔ fɔ si ova lɔng distans.

Hɛt Resistɛns ɛn Ɔt Tebul

Fleksibul PVC tebul kɔva kin telɛ nɔmal indo tɛmpracha ɛn ɛvride tebul yuz, bɔt dɛn nɔ fɔ ɔtomɛtik diskrayb dɛn as ɔtpruf.

di hεt bihayvya dipכnt pan di PVC fכmyuleshכn, plastizayza, stεbyulayza, tik, kכntakt tεm, lod εn tεmprachכ fכ di tin we dεn put pan di kכva.

Nɔ fɔ put ɔt pan, pɔt fɔ kuk, ɔvin tre, ketul ɛn tin dɛn fɔ kuk dairekt pan di PVC.

Yuz wan fayn trivet ɔ ɔt-insulayt pad ɔnda ɔt kuk fɔ ridyus di sof, indenteshɔn, diskɔlɔreshɔn ɔ difɔmeshɔn fɔ ɔltɛm.

Di kɔstɔma dɛn we nid wan patikyula ɔt raytin fɔ tɔk bɔt di tɛmpracha, di tɛm we dɛn fɔ kɔntakt, di lod, di tik ɛn di we aw dɛn de tɛst.

PVC Opshɔn dɛn we Nɔ-Fthalate ɛn Lɔw-Odor

Fleksibul PVC nid fɔ gɛt plasticizer sistem fɔ ajɔst di softness ɛn fleksibiliti we dɛn nid.

Nɔn-ftalayt fɔmyulashɔn dɛn kin divɛlɔp yuz aplikeshɔn-spɛsifi k ɔltɛrnativ plastizayza dɛn we di kɔstɔma ɔ di dɛstineshɔn makit nid am.

Di wɔd nɔ-ftalayt fɔ sɔpɔt bay wan tɛst ripɔt we de sho di phthalates we dɛn tɛst, di limit fɔ ditekshɔn, di diskripshɔn fɔ di prɔdak ɛn di de we dɛn ripɔt.

Di gred dɛn we nɔ gɛt bɛtɛ smel kin ridyus di fɔs indo smel, bɔt di PVC we dɛn jɔs opin kin stil nid fɔ gɛt ventilashɔn ɛn aklimashɔn afta dɛn dɔn pak di rol fɔ lɔng tɛm.

Di Tin dɛn we Yu fɔ Du fɔ Kɔntakt fɔ it

Standart tebul-kɔva PVC nɔ fɔ ɔtomɛtik diskrayb as apruv fɔ dairekt it kɔntakt.

Fɔd-kɔntakt suitabiliti dipen pan di PVC rɛsin, plastizayza, stebyulayza, lɔbrik, pigmɛnt, print sɔfays, kɔntakt it, tɛmpracha, di tɛm we i fɔ tek ɛn di dɛstineshɔn makit.

EN71-3 adrɛs maykreshɔn fɔ sɔm ɛlimɛnt dɛn frɔm tɔy matirial dɛn. I nɔ de bay insɛf sɛf fɔ mek pipul dɛn fala di lɔ fɔ yuz we pɔsin de it wit it.

REACH ɛn nɔ-phthalate tɛst dɛnsɛf gɛt difrɛn skɔp frɔm it-kɔntakt maykreshɔn tɛst.

Di kɔstɔma dɛn we nid PVC fɔ kɔntakt it fɔ gi di dɛstineshɔn makit, di kayn it, kɔntakt tɛmpracha, kɔntakt tɛm ɛn aplikebul rigyuleshɔn bifo dɛn prodyuz.

Indo ɛn Ɔda Aplikeshɔn dɛn

Standart supa klia PVC tebul kɔva na fɔ indo os, rɛstɔrant, ɔtel, ɔfis, skul, rital stɔ ɛn ivin venus.

If yu de na di san fɔ lɔng tɛm, i kin mek yu yɔlɔ, at, krak, fade ɔ lɔs transparency insay wan fɔmyulashɔn we nɔ stebul.

Tebul dɛn we de na do, tɛnt winda, marin ɛnklɔzhɔ ɛn ɛkstirian kɔtin fɔ yuz gred we UV-stabilized ɛn weda-resistant we dɛn dɔn divɛlɔp fɔ di klaymat ɛn ɛksplɔshɔn tɛm we dɛn de op fɔ.

Kol envayrɔmɛnt kin nid fɔ gɛt lɔw tɛmpracha fɔmyulashɔn we dɛn mek fɔ mek i nɔ stif ɛn kol krak.

Standart, UV-Stabilayz ɛn Flɛm-Rɛtardant PVC Gred dɛn

Standart transparent PVC nɔ fɔ ɔtomɛtik diskrayb as UV-pruf, pɔrmanent ɔda-rɛsistant ɔ fayapruf.

Aplikeshɔn fɔ Supa Klia PVC Rol dɛn

• Dining tebul protɛkta: Transparent protɛkshɔn fɔ wud, mabul, ston ɛn dɛkɔretiv tebultɔp.

• Ɔfis dɛsk mat: Klia protɛkshɔn fɔ wok dɛsk, risepshɔn kɔnta ɛn mitin tebul.

• Fɔnicha fɔ ɔspitul: Kɔva fɔ rɛstɔrant, ɔtel, kafe, ba ɛn ples dɛn fɔ mek pati.

• Tebul klos dɛn we dɛn print: Klia di layt we de ɔp we de protɛkt di dɛkɔretiv ɔ print tebul kɔva dɛn.

• Buk ɛn dɔkyumɛnt kɔva: Fleksibul klia kɔva fɔ buk, mɛnyu, katalog ɛn fayl dɛn.

• Fleksibul pak: Transparent bag, paus, walet ɛn prɔmoshɔnal pak.

• Kɔtin ɛn patishɔn: Fleksibul transparent panɛl fɔ kɔmɛshɔnal ɛn industri spɛs.

• Tɛnt ɛn ɛnklɔz winda: Aplikeshɔn-spɛsifi k klia PVC fɔ fleksibul winda ɛn shelta panɛl.

Kastom Kɔt ɛn Kɔnvɔyt Opshɔn dɛn

• Kastom rol slitting frɔm masta rol dɛn.

• Fiks-lɛng sheet ɛn tebul-protɛkta blank.

• Rɛktangul ɛn skwea tebul kɔva dɛn.

• Raun ɛn oval tebul protɛkta dɛn.

• Raun kɔna ɛn kɔna rayus we dɛn kɔstɔmayz.

• Hol, slot ɛn cutout dɛn we dɛn kɔstɔmayz.

• Stret edj ɛn aplikeshɔn-spɛsifi k bevɛl-ɛj ɛvalueshɔn.

• Fim we dɛn print, ɛmbos ɛn we gɛt kɔlɔ.

• Prayvet-lɛbul rol ɛn rital pak.

Klin ɛn Mentɛnans

Waip di PVC safa wit saf wet klos, mild sop ɔ kɔmpitabl jenɛral-pɔpɔs klin.

Rimov di tin dɛn we dɔn rɔsh kwik kwik wan fɔ ridyus di stɛyn frɔm kɔfi, ti, sos, ink, day ɛn wata we gɛt strɔng kɔlɔ.

Nɔ yuz abrasive pad, shap skrap, strɔng sɔlvɛnt, kɔnsɛntret alkol, asɛtɔn ɛn agresiv kemikal klin pas dɛn dɔn chɛk if dɛn kɔmpitabl.

Lift ɛn klin ɔnda di kɔva wan wan tɛm fɔ pul di mɔstɔ we dɔn trɔp, dɔst ɛn it we lɛf.

Nɔ fold tik klia PVC fɔ stɔrɔj ​​fɔ lɔng tɛm bikɔs pɔrmɛnt kris kin divɛlɔp. Stɔ am flat ɔ rol am rawnd wan kɔr we fit.

Aw fɔ Flat PVC Afta yu dɔn Unrol

Unroll di tebul kɔva na klin rum-tɛmpracha eria ɛn put am pan flat say.

Alaw di matirial fɔ aklimat bifo dɛn dɔn trim am ɔ instɔl am fayn fayn wan.

Wan jɛnɛral rivas rol kin ɛp fɔ ridyus di rol kɔl. Nɔ shap shap bɛnd ɔ kris.

Nɔ yuz ɔt gɔn we yu nɔ kɔntrol, opin flaym ɔ ɔt pasmak fɔ flat PVC bikɔs if yu ɔt pasmak, i kin mek yu nɔ gɛt bɛtɛ kɔlɔ, yu nɔ gɛt kɔlɔ ɔ yu gɛt smok.

Kwaliti-Kɔntrol Tɛst dɛn we Dɛn Rikɔmɛnd

• PVC resin, plastizayza ɛn fɔmyulashɔn verifyeshɔn.

• Tik ɛn tik tolɛreshɔn.

• Rol wit ɛn wit tolɛreshɔn.

• Rol lɔng, nɛt wet ɛn gros wet.

• Densiti ɛn hadnɛs.

• Transparency, haze ɛn kɔlɔ kɔnsistɛns.

• Ɔda ɛn volatil-sɔbstans ɛvalueshɔn usay dɛn nid am.

• Surface gloss, mat levul ɛn ɛmbos kɔnsistɛns.

• Blɔk ɛn rol-unwinding pefɔmɛns.

• Longitudinal ɛn transvas shrinkage.

• Tensile, elongation ɛn tear pefɔmɛns.

• Kol-krak tɛst fɔ lɔw-tɛmpracha gred dɛn.

• Hɛt-kɔntakt ɛn indenteshɔn tɛst usay dɛn spɛsifa.

• Stayn ɛn klin-kɛmikal rɛsistɛns.

• Plasticizer migration ɛn surface-compatibility evalueshɔn usay dɛn nid am.

• Phthalate, REACH ɛn restricted-substance testing usay dɛn spɛsifa.

• Fɔd-kɔntakt maykreshɔn tɛst fɔ di gred dɛn we dɛn kin yuz.

• UV ɛn flaym tɛst fɔ spɛshal fɔmyulashɔn dɛn.

• Rol pak, lɛbl, kɔr ɛn palet inspekshɔn.

Kastom PVC Tebul Kɔva Opshɔn dɛn

• Featured 120cm / 1200mm rol wit.

• Customized widths frɔm lɛk 50mm to 2300mm.

• Standart tiknes frɔm lɛk 0.5mm to 7mm.

• Kastom rol lɔng, wet ɛn kɔr dayamita.

• Nɔmal klia, supa klia ɛn blu-tint klia gred dɛn.

• Transparent, translucent ɛn opaque kɔstɔmayt kɔlɔ dɛn.

• Glos, mat, frɔst, dɔst ɛn ɛmbos sɔfays.

• Sɔftnɛs ɛn hadnɛs we dɛn kɔstɔmayz.

• Fɔmyulashɔn dɛn we nɔ gɛt bɔku ɔda ɛn we nɔ gɛt ftalat.

• UV-stabilized ɛn kol-resistant ɔda gred dɛn.

• Aplikeshɔn-spɛsifi k flaym-rɛtardant gred dɛn.

• Food-contact formulations wit aplikebul dokumɛnt.

• Slit, shit, rawnd kɔna ɛn kɔstɔm shep.

• Prayvet-lɛbul rol, katon ɛn rital pak.

Infɔmeshɔn we dɛn nid fɔ mek wan PVC Tebul Kɔva Kɔt

• Faynal aplikeshɔn: tebul protɛkta, dɛsk mat, tebul klos, kɔtin, bag ɔ fleksibul winda.

• Tik ɛn tolɛreshɔn we dɛn nid.

• Rol wit ɛn wit tolɛreshɔn.

• Rikwayd rol lɔng, rol wet ɛn kɔr dayamita.

• Nɔmal klia, supa klia ɔ kɔstɔmayz kɔlɔ.

• Glos, mat, frɔst ɔ ɛmbos sɔfays.

• Rikwayd fɔ soft, had ɔ drap.

• Akseptabl smel ɛn shrinkage.

• Aplikeshɔn insay os ɔ na do.

• Di minim ɛn maksimal savis tɛmpracha dɛn we dɛn de ɛkspɛkt.

• Nɔn-phthalate, low-odor, UV, kol-resistant ɔ flame rikwaymɛnt.

• Dairekt fud-kɔntakt rikwaymɛnt ɛn dɛstineshɔn makit.

• Slitin, shit ɔ kɔstɔm-shep rikwaymɛnt dɛn.

• Ritayl lɛbl, barɔd ɛn pak we dɛn nid.

• Initial kwantiti ɛn ɛstimat ɛni ia volyum.

• Destination port ɛn di de we dɛn nid fɔ sɛn am.

Send Yu PVC Tebul Kɔva Rikwaymɛnt dɛn

Pak ɛn Delivri

Sampul pak: A4 sheet ɛn kɔstɔmayz kɔt sɛmpul dɛn kin pak insay PP ɔ PE bag ɛn protɛktiv katon.

Rol pak: Yu kin rap rol wit PE film, kraft pepa, wev bag ɔ kɔstɔmayz protɛktiv matirial.

Standart rol wet: Yu kin kɔstɔmayz di rol wet akɔdin to di tik, waid, lɔng ɛn di ikwipmɛnt we di kɔstɔma de handle.

Kor protɛkshɔn: Dɛn kin protɛkt di kɔr ɛnd ɛn rol ed fɔ ridyus di krɔsh ɛn transpɔt damej.

Palet pak: Na lɛk 500-2,000kg kin pak pan plai wud palet dipen pan di rol dimɛnshɔn ɛn di we aw dɛn nid fɔ handle.

Kɔntena lod: Rifrɛns lod na lɛk 20 tan, we de ɔnda di rol dimɛnshɔn, palet kɔnfigyushɔn, kɔntena volyum ɛn ligal wet limit.

Lid tɛm: Standart prodakshɔn nɔmal fɔ tek lɛk 7-15 dez afta spɛsifikɛshɔn, kwantiti, pak ɛn pemɛnt kɔnfɔmeshɔn.

Dilivri tɛm dɛn: EXW, FOB, CNF, DDU ɛn ɔda kɔmɛshɔn tɛm dɛn we dɛn gri pan de.

Sɛtifiket ɛn Kɔmplians Dokumɛnt dɛn

Di dɔkyumɛnt dɛn we de kin gɛt ripɔt dɛn we gɛt fɔ du wit tin dɛn we dɛn nɔ gri fɔ du, ripɔt dɛn we gɛt fɔ du wit phthalate test, ripɔt dɛn we gɛt fɔ du wit EN71-3, ripɔt dɛn we gɛt fɔ du wit REACH ɛn kwaliti-mɛnejmɛnt sɛtifiket dɛn.

EN71-3 gɛt fɔ du wit maykreshɔn fɔ sɔm ɛlimɛnt dɛn frɔm tɔys matirial ɛn dɛn nɔ fɔ diskrayb am as jenɛral it-kɔntakt sɛtifikeshɔn.

REACH, nɔ-phthalate, fud-kɔntakt, flame-retardant ɛn kwaliti-mɛnejmɛnt dɔkyumɛnt dɛn ɛvri wan gɛt difrɛn skɔp.

Di wan dɛn we de bay fɔ kɔnfɔm di prɔdak diskrɔpshɔn, tik, fɔmyulashɔn, sɔbstans dɛn we dɛn dɔn tɛst, limit, ripɔt de ɛn aplikebul dɛstineshɔn makit bifo dɛn abop pan ɛni dɔkyumɛnt.

Wetin Mek Yu Pik HSQY as Yu PVC Tebul Kɔva Splaya?

• 120cm supa klia PVC tebul kova rol prodakshɔn.

• Customized widths op to aprɔksimatli 2300mm.

• Standart tiknes frɔm lɛk 0.5mm to 7mm.

• Nɔmal klia, supa klia ɛn kɔstɔmayt kɔlɔ dɛn.

• Glossy, mat, frosted ɛn ɛmbos sɔfays dɛn.

• Customized hadness, rol lɔng ɛn rol wet.

• Opshɔn dɛn we nɔ gɛt phthalate, we nɔ gɛt bɔku ɔda, UV ɛn we nɔ de mek kol.

• Sampul fɔ klia, smel, shrinkage ɛn sɔfayz tɛst.

• Slitin, shit ɛn kɔstɔm-shep sɔpɔt.

• Prayvet-lɛbul rol ɛn rital pak.

• Kwaliti inspekshɔn agens di spɛsifikɛshɔn dɛn we dɛn dɔn gri fɔ.

• Ekspɔt pak ɛn intanashɔnal-delivri sɔpɔt.

Bifo bulk prodakshɔn, HSQY rikɔmɛnd fɔ tɛst di PVC gred we dɛn dɔn pik pan di aktual tebul sɔfa ɛn evalyu klia, sɔfa intarakshɔn, smel, shrink, ɔt bihayvya ɛn klin pefɔmɛns.

Kontakt HSQY fɔ Sampul ɛn Prayz

HSQY Globɛl Ɛgzibishin dɛn

Kwɛstyɔn dɛn we Dɛn kin Aks Bɔku tɛm Bɔt Klia PVC Tebul Kɔva

Wetin na wan supa klia PVC tebul kɔva rol?

Na wan fleksibul transparent PVC rol we dɛn kin yuz fɔ mek tebul protɛkta, dɛsk mat, tebul klos ɛn fɔnicha-protɛkshɔn kɔva.

Aw waid na 120cm PVC tebul kɔva rol?

120cm rol na 1200mm, 1.2 mita ɔ lɛk 47.2 inch waid.

Us tik tik dɛn de?

Standart prodakt tiknes de frכm aprכksimatli 0.5mm to 7mm. Ɔda spɛsifikɛshɔn dɛn nid fɔ gɛt tɛknikal kɔnfɔmeshɔn.

1mm o 2mm beta fo dina tebul?

Wan 1mm kɔva layt ɛn izi fɔ rol. Wan 2mm kɔva kin ebi, i kin stebul ɛn i kin gi mɔ kusɛn fɔ tebul dɛn we dɛn kin yuz bɔku tɛm.

Wetin na di difrɛns bitwin nɔmal klia ɛn supa klia PVC?

Supa-klia PVC na fɔmulayt ɛn prosɛs fɔ impɔtant transparency ɛn lɔwa vijual distɔrshɔn. Faynal klia fɔ apruv yuz wan fizik sampul.

Yu tink se klia PVC tebul kɔva na di sem wit glas?

Nɔ, PVC kin chenj, i layt ɛn i nɔ kin ambɔg, bɔt i saf, i izi fɔ skrach ɛn i gɛt difrɛn ɔt ɛn optik prɔpati frɔm glas.

Yu tink se yu kin kɔt di PVC rol to di sayz?

Yɛs. I kin slit, shit ɛn kɔt am insay rɛktɛnj, sɛklɔ, ɔval, rawnd-kɔna protɛkta ɛn kɔstɔmayt shep.

Yu tink se klia PVC kin shrink afta yu dɔn kɔt?

Fleksibul PVC kin shrink smɔl afta dɛn dɔn prodyuz, transpɔt, unrolling ɔ tɛmpracha chenj. Dɛn fɔ kɔt di prɔdak dɛn we gɛt di rayt saiz afta dɛn dɔn aklimat yuz wan shrinkage alawɛns we dɛn dɔn gri fɔ.

Wetin mek bɔbul dɛn de ɔnda PVC pan glas tebul?

Smɔl PVC kin trap smɔl smɔl ay poket ɔ mɔstɔ agens glas. Wan mat, tɛkstɔr ɔ dɔst lɔwa sɔfa kin ridyus dɛn visibiliti.

Yu tink se dɛn kin yuz PVC tebul protɛkta pan wud we dɛn dɔn pent ɔ we dɛn dɔn lak?

Dɛn fɔ tɛst di kɔmpatibiliti fɔs. Di say dɛn we dɛn jɔs dɔn peint, lak ɔ rifinish fɔ dɔn ful-ɔp bifo dɛn kɔntakt dɛn dairekt wan.

PVC tebul kɔva nɔ de ɔt?

di hεt rεsistεns dipכnt pan di fכmyuleshכn, tik, tεmprachכ εn kכntakt tεm. Yu fɔ put ɔt tin dɛn fɔ kuk ɔltɛm pan pad we nɔ de mek di ples wam.

A kin put hot pan dairekt pan di PVC kɔva?

Nɔ, dairekt kɔntakt wit ɔt pan, pɔt ɔ ɔvin tre kin mek di matirial sof, mak ɔ difɔm.

Yu tink se di tebul kɔva nɔ de mek wata pas?

Di PVC matirial nɔ de alaw nɔmal likwid spil fɔ pas tru, bɔt likwid kin go insay ɔnda frɔm ed ɔ jɔyn dɛn we nɔ kɔba.

Na supa klia PVC it ​​sef?

Standard matirial nɔ fɔ yuz ɔtomɛtik wan fɔ dairekt it kɔntakt. Yuz fɔ it-kɔntakt nid fɔ gɛt aplikebul fɔmyulashɔn ɛn makɛt-spɛsifi k maykreshɔn dɔkyumentri.

EN71-3 pruv se PVC na tin we sef fɔ it?

No. EN71-3 de adrɛs maykreshɔn fɔ sɔm ɛlimɛnt dɛn frɔm tɔy matirial ɛn i nɔto kɔmplit it-kɔntakt standad.

Yu tink se PVC tebul kɔva dɛn we nɔ gɛt phthalate de?

Yɛs. nכn-ftalayt fכmyuleshכn dεm kin prodyuz sכbjεkt to di ristrikt sכbstans dεm we dεn nid, limit dεm εn כda kwantiti.

Yu tink se nyu PVC gɛt ɔda tin we de smɛl?

Fleksibul PVC we dɛn jɔs opin kin gɛt fɔs smel afta dɛn dɔn rol am tayt ɛn pak am. Gret we nɔ de smɛl fayn ɛn we di briz de blo kin ridyus dis prɔblɛm.

Aw a go flat wan rol PVC tebul kɔva?

Unroll am pan klin flat surface, alaw am fɔ aklimat na rum tɛmpracha ɛn jisnɔ rivas rol am if nid de.

Aw dɛn fɔ klin wan klia PVC tebul kɔva?

Yuz klos we saf, sop we nɔ gɛt wan bɔt ɛn wata. Nɔ yuz abrasive pad ɛn strɔng sɔlvɛnt.

Yu kin yuz klia PVC na do?

Yuz na do, yu nid fɔ gɛt gred we UV-stabilized ɛn weda-resistant. Standard indoor PVC kin yɔlɔ ɔ bi brittle afta yu dɔn de na di san fɔ lɔng tɛm.

Na klia PVC fayapruf?

Nɔ jenɛral klia PVC nɔ fɔ diskrayb as fayapruf. Flame pefɔmans nid fɔ gɛt spɛshal fɔmyulashɔn ɛn ripɔt fɔ di ɛksaktɔ tik ɛn tɛst standad.

Yu tink se dɛn kin mek kɔstɔm kɔlɔ ɛn pɔtn dɛn?

Yɛs. Transparent kala, translucent kala, mat surface ɛn ɛmbos patɛn kin kɔstɔmayz sɔbjɛkt to MOQ.

Wetin na di minimum ɔda kwantiti?

di standad MOQ we dεn sho fכ dis prodak na lεk 1,000kg. Spɛshal kɔlɔ ɛn fɔmyulashɔn dɛn kin nid difrɛn kwantiti dɛn.

Yu tink se sampul dɛn de?

A4 sheet, kɔt pis ɔ limited rol sɛmpul kin de fɔ chɛk klia, tik, smel, sɔfa ɛn fleksibiliti.

Wetin na di prodakshɔn lida tɛm?

Standart prodakshɔn nɔmal fɔ tek lɛk 7-15 dez afta spɛsifikɛshɔn, kwantiti, pak ɛn pemɛnt kɔnfɔmeshɔn.

Us infɔmeshɔn dɛn nid fɔ kot?

Gi di tik, waid, rol lɔng, rol wet, klia, sɔfa, hadnɛs, aplikeshɔn, spɛshal fɔmyulashɔn, kwantiti, pak ɛn ples fɔ go.

Get wan Kastom PVC Tebul Kɔva Kɔt

Bɔt HSQY Plastik Grup

HSQY Plastik Grup de saplae supa klia PVC tebul kɔva rol, fleksibul PVC film, rigid PVC shit, PET shit, PP shit, CPET trey ɛn kɔstɔmayz plastic matirial to intanashɔnal B2B kɔstɔma dɛn.

HSQY de sɔpɔt tebulklɔt manifakta, fɔnicha-protɛkshɔn brand, ɔlsay, ɔspitul saplay, pak kɔnvɔta, impɔtɔ ɛn distribyushɔn wit sampul ɛvalueshɔn, kɔstɔmayz prodakshɔn, kwaliti inspekshɔn ɛn ɛkspɔt pak.

Rikwest fɔ Kot ɛn Sampul