PP we gɛt ay transparent
Fɔ bayer dɛn we de prayoritayz prodak visibiliti we dɛn de kip wan PP kɔnstrɔkshɔn.
Kɔnfɛm: haz, glos, kɔlɔ ɛn fɔm-pat apinans.
POLYPROPYLENE SHEET DI WAN WE DE MEK
Polipropilɛn (PP) Shit fɔ Tɛmofɔmin, Pakɛj & Fabrikeshɔn
Sos PP shit insay rol ɔ kɔt fɔmat wit di kɔlɔ, sɔfa ɛn fɛnshɔnal gred we mach to yu fɔm, fɔl, print ɔ industrial prɔses.
DI KWƐK ANSA
Wetin na polipropilɛn sheet?
Polipropilɛn shit na rigid ɔ sɛmi-rigid shit stok we dɛn mek wit PP tɛmplastik rɛsin. Dɛn kin kɔmɔn fɔ evalyu am fɔ thermoformed pakej, steshɔnari, layna, patishɔn, ilɛktrik pak ɛn fabricated kɔmpɔnɛnt usay lɔw wet, mɔstɔ resistans, kemikal kɔmpatibiliti ɔ tayla sɔfays kin yusful.
PP na matirial famili, nɔto wan spɛsifikɛshɔn we dɔn dɔn. Rɛsin gred, kɔnstrɔkshɔn, tiknɛs, kɔlɔ, sɔfayz tritmɛnt, aditiv, rol jɔyometri ɛn daunstrim prɔsesin ɔl de afɛkt di fayn rizɔlt ɛn dɛn fɔ kɔnfyus am na di sheet we dɛn want.
GRƐD & SƆFƐS SƐLƐKTƆ
Start wit di wok we yu nid—nɔto jɔs tik
Pik wan kategori fɔ mek di sampul smɔl. Fɔnshɔnal lɛbl dɛn nid fɔ gɛt difayn gred, tɛst we ɛn rayt akseptans krayteria.
PP we gɛt kɔlɔ
Natural, wayt, blak ɔ projɛkt kɔlɔ fɔ steshɔnari ɛn pat dɛn we dɛn mek.
Kɔnfɛm: kɔlɔ rɛfrɛns, opasiti, lɔt tolɛreshɔn ɛn finish.Tekstur PP we gɛt di taytul
Frɔst ɔ patɛn sɔfays we fil, difyushɔn ɔ skrach apinɛns impɔtant.
Kɔnfɛm: tɛkstɔr kɔd, wan/tu-sayd finish ɛn ɔriɛnteshɔn.Antistatik PP
Wan funkshɔnal opshɔn fɔ ilɛktroniks ɛn fɔ handle program dɛn wit ilɛktrik target.
Konfam: resistans rεnj, tεst kכndishכn, durashכn εn כl tu-sayd nid dεm.PP we nɔ de wam
Wan projɛkt-spɛsifi k gred fɔ aplikeshɔn dɛn wit difayn prɔsesin ɔ savis tɛmpracha.
Kɔnfɛm: tɛm, lod, tɛmpracha saykl ɛn tɛst we.Flame-retardant PP we nɔ de mek faya
Wan kɔntrol gred usay wan nem flammabiliti rikwaymɛnt na pat pan di drɔin.
Kɔnfɛm: standad, raytin, tiknɛs, kɔlɔ ɛn ripɔt validiti.KƆRƐNT PRODƆKT SƆTLIST
8 PP sheet opshɔn dɛn fɔ kɔmpia
Ɛni kad de link to wan HSQY prodak we de naw. Verifay di avaylabl, kɔnstrɔkshɔn, tolɛreshɔn ɛn fɛnshɔnal dɔkyumentri na di prɔjek kot.
RƆL • FƆNKSHƆNAL GRED
PP Sheet Rol we nɔ de wam
Fɔ prɔjek dɛn we gɛt difayn tɛmpracha saykl ɛn tɛst rikwaymɛnt.
Luk di prɔdak
WAYT • TIN GƐJ
Tin Wait PP Sheet
Wan wayt sheet opshɔn fɔ kɔnvɔshɔn, steshɔnari ɔ fabricated-pat trayal.
Luk di prɔdak
KƆLƆR • MƆLTI-TIKNƐS
Polipropilɛn Sheet we gɛt kɔlɔ
Tik ɛn kɔlɔ dɛn we dɛn dɔn pik fɔ mek dɛn gri fɔ si ɛn fɔ mek dɛn mek am.
Luk di prɔdak
FROSTED • WE DE TRANSLUSƐNT
Frosted Klia PP Sheet
Wan difyuz-sɔfa opshɔn fɔ fɔlda, kɔva ɛn fabrik kɔmpɔnɛnt dɛn.
Luk di prɔdak
FƆNKSHƆNAL • FLƐM RƐTADƐNT
Klir Flame-retardant PP Sheet we de mek yu nɔ gɛt flaym
Kɔnfɛm raytin, standad, tiknɛs, kɔlɔ ɛn kɔrɛnt sɔpɔt ripɔt.
Luk di prɔdak
0.4 MM • SMƆL TƆK: FROSTED
0.4 mm Frosted PP Sheet we yu de yuz
Wan tin frɔst sheet fɔ kris, kɔt, fold ɛn fɔ tɛst aw i tan.
Luk di prɔdak
0.3 MM • 500 MM WIDTH
White PP Sheet in 500 mm Width
Wan difayn tin-gej fɔmat fɔ layn ɛn dɔn-pat validɛshɔn.
Luk di prɔdak
NATURAL • 0.5 MM we yu de yuz
0,5 mm Natural PP Sheet we yu go yuz
Wan natura PP shit fɔ fɔm, fold ɛn fabricated-pat sampling.
Luk di prɔdakAPPLIKƐSHƆN RƆUTIN
Match PP sheet to di finish-yuz kɔndishɔn dɛn
Tɛl di spɔlayt aw dɛn go kɔnvɔyt, yuz ɛn aksept di sheet so di sampul go sho di rial prɔjek.
Pak we dɛn mek wit tɛmɔfɔm
Sheb di trey ɔ pak drɔin, mold dip, layn limit, pak prodak, ɔt kɔndishɔn ɛn siling sistɛm.
Validate: sag, fɔm winda, wɔl distribyushɔn, flɛnch ɛn trim.Steshɔnari & folding prodakt dɛn
Difayn di sheet saiz, kɔlɔ, tɛkstɔr, kris dairekshɔn, hinj saykl, print eria, wɛld ɔ klos ditil.
Validate: kris, fold waytin, hinj, ink ɛn dimɛnshɔnal stebiliti.Industrial & kemikal yus
Gi di kemikal, kɔnsɛntreshɔn, tɛmpracha, kɔntakt tɛm, strɛs, fabrikeshɔn ɛn savis ɛnvayrɔmɛnt.
Validate: kompitibiliti pan di aktual gred—nɔ ɛva asum frɔm 'PP' nɔmɔ.Ilɛktronik tin dɛn we dɛn kin pak
Stet di rikwayd surface-resistance rεnj, test kondishכn, shelf layf, klin, fכm εn hεndl mεtכd.
Validate: ilɛktrik pefɔmɛns bifo ɛn afta fɔm ɔ stɔrɔj.
KƆNVƐTA CHƐKPOINT DƐN
PP nid fɔ gɛt wan prɔses-spɛsifi k trayal
Tɛrmofɔmin ɔt prɔfayl
PP kin bi sensitiv to hεtin bεlε εn sag. Test di wɛb wit we yu want, gej, mashin ɛn mold ɔnda ripɔt kɔndishɔn dɛn.
Printin & bond we yu de du
PP gɛt rili lɔw sɔfayz ɛnaji. Spɛsifik korona ɔ ɔda tritmɛnt ɛn validet ink, adeziv ɔ wɛldin kɔndishɔn dɛn na di fes we dɛn nominate.
Kot, kris & fold
Apruv tul jɔyometri, kris dip, fold dairekshɔn, edj kwaliti ɛn ripit hinj bihayvya pan di ɛksaktɔ tik ɛn tɛkstɔr.
Rol fidin & pak
Match yuzable width, kor, outa dayamita, rol weit, winding, edj kondishon en unloading method to di konvayt lain.
SPƐSIFIKƐSHƆN-FƆS RFQ
Send di data we yu nid fɔ wan kɔmparabl PP shit kot
If di gred nɔ disayd, sɛn di dɔn-prɔdakt drɔin, prɔsesin rod ɛn akseptans tɛst so dat dɛn go tɔk bɔt di rayt sɛmpul dɛn.
Fɔnkshɔn-grɛd not: Fɔd-kɔntakt, flame-ritardant, antistatik, kɔnduktiv ɛn tɛmpracha klem dɛn fɔ tay to wan nem gred, tiknes, tɛst we dɛn de du ɛn kɔrɛnt sɔpɔtin dɔkyumɛnt.
| RFQ fild | Wetin fɔ gi | Wetin mek i impɔtant |
|---|---|---|
| End yus | Finish prodak, savis envayrɔmɛnt ɛn akseptɛns tɛst | Fram gred sɛlɛkshɔn |
| Fɔmat | Rol ɔ kɔt sheet; lɔng × waid usay i apɔynt | Set di kɔnvɔyt ɛn pak rod |
| Mɛzhɔ | Nominal tik ɛn alaw tolɛreshɔn/prɔfayl | Afɛkt fɔm ɛn stiffness |
| Kɔlɔ & sɔfays | Aprɔv rɛfrɛns, opasiti, glos, frɔst ɔ tɛkstɔr kɔd | Difayn di akseptɛns we pɔsin kin si |
| Fɔnshɔnal gred | Pɔfɔmɛnshɔn target, tɛst we, di tɛm we i fɔ tek ɛn di kɔndishɔn dɛn | I de mek dɛn nɔ tɔk bɔt tin dɛn we nɔ klia |
| Kɔnvɛnshɔn | Tɛmofɔm, kɔt, kris, fold, print, wɛl ɔ bond | Difayn sampul trayal dɛn |
| Rol jɔyometri | Kor ID, ɔta dayamita, rol wet/lɛngth ɛn wayndin | Mek shɔ se layn kɔmpitibliti |
| Dokumɛnt dɛn | Destination market ɛn ɛksaktɔl diklareshɔn/ripɔt dɛn we dɛn nid | Sɔpɔt fɔ mek pipul dɛn fala di prɔjek |
| Biznɛs | Sampul nid, kwantiti, pak, ples fɔ go ɛn di de we dɛn want fɔ go | Prodyuz wan kot we yu kin yuz |
SAMPUL-TO-PRODUKSHƆN
Krio wan rayt aprɔval beslayn
Kip matirial, prɔses, kwaliti ɛn kɔmɛshɔnal ditil dɛn alaynɛd frɔm di fɔs sampul.
- 1
Wetin i min
Aplikeshɔn, drɔ, gred dairekshɔn, dimɛnshɔn ɛn tɛst.
- 2
Ɛgzampul
Riprɛzɛntiv rɛsin, gej, kɔlɔ, sɔfa ɛn rol fɔmat.
- 3
Chenj
Rɔn di aktual fɔm, print, fold ɔ fabrikeshɔn we.
- 4
Gri
Rikɔd di we aw i tan, di tolɛreshɔn, di pefɔmɛns, di pak ɛn di dɔkyumɛnt dɛn.
- 5
Ɔda
Kot ɛn prodyuz agens di apruv rayt spɛsifikɛshɔn.
FAQ WE YU DE BAY
PP sheet sɔs kwɛstyɔn dɛn
Dairekt ansa fɔ pak kɔnvɔta, steshɔnari manifakta ɛn industrial bayer.
Aks wan kwɛstyɔn we gɛt fɔ du wit di prɔjekWetin dɛn kin yuz PP sheet fɔ?
PP shit de yuz insay thermoformed pakej, steshɔnari ɛn fɔlda, fabricated layna, patishɔn, ilɛktrik pak ɛn industrial kɔmpɔnɛnt dɛn. Suitability dipen pan gred, tiknes, surface, prɔsesin ɛn savis kɔndishɔn.
PP sheet fit fo thermoforming?
Di aprɔpriet PP gred dɛn de bɔku bɔku wan we dɛn de mek di tɛm, bɔt di balans we dɛn de yuz fɔ ɔt ɛn kɔntrol di sag kin bi mɔ sɛnsitiv pas sɔm ɔda shit matirial dɛn. Validate di nominated gred pan di intended mashin ɛn mold bifo prodakshɔn.
Ɛvri PP sheet fayn fɔ kɔntakt it?
Nɔ, yuz wan gred nɔmɔ we dɛn sɔpɔt fɔ di kayn it we yu want, di tɛmpracha, di kɔntakt kɔndishɔn ɛn di say we yu want fɔ go na di makit. Rikwest di aplikebul diklareshɔn ɔ tɛst dɔkyumɛnt fɔ di ɛksaktɔl ɔda kɔnstrɔkshɔn.
Wetin na di difrɛns bitwin natura, klia ɛn translucent PP?
Dɛn wɔd ya kin yuz difrɛn we bitwin di saplay dɛn. PP apinans de chenj bak wit rεsin, aditiv, surface tεkschur, tiknes εn prכsεsin. Difayn wan optik target ɛn apruv wan fizik kɔlɔ/apiɛns sampul.
Aw fɔ spɛsifa antistatik PP?
Stet di rεsistεns rεnj, tεst standad, kכndishכn, mεzjכmεnt kכndishכn, durashכn, fεs we dεn nid εn pεrformεns afta fכm כ stכrej. 'Antistatic' nɔmɔ nɔto akseptɛns krayteria.
Yu tink se dɛn kin print ɔ bon PP sheet?
Yes, wit wan kompitibul matirial ɛn prɔses, bɔt PP gɛt rili lɔw sɔfayz ɛnaji. Kɔnfɛm sɔfayz tritmɛnt ɛn tɛst di ink, adeziv, wɛl ɔ lɛbl sistɛm pan di aktual gred ɛn nominated fes.
Us rol ditel dɛn nid fɔ kot?
Gi gej ɛn tolɛreshɔn, yuzable wit, kɔr ID, maksimal ɔta dayamita, rol wet ɔ lɔng, wayndin dairekshɔn, edj rikwaymɛnt, kwantiti, pak ɛn layn-hanlin limit.
STƆT WIT DI PAT WE DƐN FINISH
Rikwest wan PP sheet sampul ɛn tɛknikal kot
Send di drɔin, gej, kɔlɔ, sɔfa, kɔnvɔshɔn prɔses, fɛnshɔnal target, ɛni ia dimand ɛn dɛstineshɔn makɛt.
Send PP Sheet Requirements
Yuzful ditel: yuz • fɔmat • tik • wit • finish • prɔses • kwantiti
