0,1mm 0,2mm 0,3mm 1mm Pvc jɛlen 3Mm

PVC sɛbɛn gɛlɛn jɛlen ye mun ye?

PVC sɛbɛn jɛlen ye polivinili kuloridi fɛn jɛlen ye, min ka gɛlɛn, min bɛ kɛ ka thermoforming, sɛbɛnni, kɛsu foli, blister pakew, lakanani datugulanw, sɛbɛnnikɛlanw, feerekɛyɔrɔw jiralanw ani plastiki fɛn dilannenw.

HSQY bɛ PVC sɛbɛn gɛlɛn jɛlenw di, u janya minnu bɛ ɲini tuma caman na, olu ye milimɛtɛrɛ 0,1, milimɛtɛrɛ 0,2, milimɛtɛrɛ 0,3, milimɛtɛrɛ 1 ani milimɛtɛrɛ 3 ye. Nin ɲɛ in ka fɛn dilannenw hakɛ dantigɛlen ye milimɛtɛrɛ 0,1 fo milimɛtɛrɛ 3 ye, ni sɛbɛnw hakɛw, u kulɛriw ani u ɲɛda finiw bɛ sɔrɔ ka kɛɲɛ ni a dilanni seko ye.

PVC fɛn finman minnu bɛ se milimɛtɛrɛ 0,1 fo milimɛtɛrɛ 0,3 ma, olu bɛ sugandi caman na sɛbɛnni kama, pake finɛtiriw, kɛsu foli nɔgɔmanw, blister pakew ani fɛn finmanw thermoformed. Milimɛtiri 1 ni milimɛtɛrɛ 3 sɛbɛnw minnu ka bon, olu bɛ gɛlɛya caman di lakanani panɛriw ma, jiralanw, masinw datugulanw, misaliw ani yɔrɔw dilannenw.

Fɛn minnu bɛ sɔrɔ, olu bɛ se ka kɛ PVC npogotiginin ye walima fura minnu bɛ kɛ ni fɛnw ye minnu bɛ segin ka kɛ. A ka c’a la, PVC min bɛ kɛ npogotiginin ye, o ka fisa ni a jɛlen don kosɛbɛ, ni a kulɛri bɛ bɛn ɲɔgɔn ma, ni foroko kɛcogo kɔrɔsilen don walima ni a ka kan ka labato ni baarakɛcogo kɛrɛnkɛrɛnnen ye.

Sannikɛlaw ka kan ka janya, hakɛ, kɛnɛya, sanfɛla fini, baarakɛcogo, hakɛ ani sugu laɲinitaw wajibiyalenw di walasa HSQY ka se ka PVC hakɛ bɛnnen dɔ laadi.

PVC sɛbɛnfura sɔngɔ jɛlen ɲini    Aw bɛ PVC Sheet Sample ɲini

PVC sɛbɛn ja jɛlenw

PVC sɛbɛn jɛlenw kunnafonisɛbɛnw

Aw ye fɛɛrɛko kunnafoniw ni kɔrɔbɔli sɛbɛnw lajɛ minnu bɛ sɔrɔ jukɔrɔ. Sannikɛlaw ka kan k’a jira ko sɛbɛn kelen-kelen bɛɛ bɛ tali kɛ PVC dilanni tigitigi la, a bonya, a kulɛri ani a dilanni cogoya tigitigi min bɛ san.

       Télécharger Transparent PVC Sheet Data Sheet                    PVC sɛbɛn jɛlen sɛgɛsɛgɛli rapɔɔri telesarse        

PVC sɛbɛn jɛlenw ka ɲɛfɔliw

Muɲuli laban muɲuni, a bonya muɲuni, a jɛlen, a kulɛri, a ɲɛda fini ani a baarakɛcogo ka kan ka dafa ni misali ye min dabɔra, fɛɛrɛko ɲɛfɔli walima sannifeere bɛnkansɛbɛn fɛ.

PVC sɛbɛn milimɛtɛrɛ 0,1, milimɛtɛrɛ 0,2, milimɛtɛrɛ 0,3, milimɛtɛrɛ 1 walima milimɛtɛrɛ 3 sugandicogo

Janya bɛ nɔ bila sɛgɛsɛgɛli la, a gɛlɛyali la, a dilanni juguya la, a dacogo la, a bɛ nɔ bila a nɔfɛta kɛcogo la ani a ka fɛn dilannenw girinya la. Tablo nata bɛ sugandili ɲɛminɛcogo caman di.

O laadilikanw ye fɛn bɛɛ ye. Sɛbɛn hakɛw, dɛmɛnanw ni ɲɔgɔn cɛ, foroko juguya, fɛn dilannenw girinya, baarakɛminɛnw ani baarakɛminɛnw funteni bɛ se ka bonya wajibiyalen Changer.

Film PVC min ka fin vs. PVC rigide épaisse

PVC sɛbɛn jɛlen ka fɛn kolomaw

Fɛn dilannenw yecogo ka bon

PVC jɛlen bɛ a to fɛnw, ja ani fɛn minnu bɛ sɛbɛn kɔfɛ, olu ka to yelen na. O b’a to a bɛ bɛn pakew dilanni ma, jiralanw, lakanani datugulanw ani feerekɛyɔrɔw jirali ma.

Rigidité pratique ani Stabilité dimensionnelle

PVC gɛlɛn bɛ a cogoya mara baarakɛcogo la min bɛ kɛ cogo la min bɛ bɛn a ma, wa a bɛ dɛmɛ nafama di fɛnw ma minnu dabɔra, minnu dilannen don ani minnu dilannen don. Gɛlɛya lakika bɛ bɔ a bonya ni a dilanni na kosɛbɛ.

Seko ni dɔnko min bɛ kɛ ka thermoforming (sɔgɔsɔgɔninjɛ) kɛ

Kalanso bɛnnenw bɛ se ka sumaya ka kɛ kurukuruw ye, sanubɔlanw, datugulanw ani fɛn saba wɛrɛw. So funteni, mɔbili dilanni ani nɛnɛ cogoya ka kan ka tiɲɛ sani a ka dilan.

Sɛbɛnni ni fɛnw masirili

PVC yɔrɔw labɛnna ka ɲɛ, olu bɛ se ka dɛmɛ don ɛkran sɛbɛnni na, UV sɛbɛnni, offset sɛbɛnni, papiye taamasiyɛn, labeling ani decorative finishing. Enki bɛnkan ka kan ka sɛgɛsɛgɛ.

Jiko kunbɛnni

PVC tɛ ji minɛ nɔgɔya la, wa a bɛ se ka kɛ yɔrɔ ye min tɛ ji bɔ, ka kɛ pakew dilanni, datugulanw ani izini yɔrɔw ye. A man kan ka kɛ a yɛrɛma i n’a fɔ jisuma-minɛn dafalen.

Kimikisɛw ka kɛlɛli

PVC bɛ se ka furakisɛ caman kɛlɛ minnu bɛ sɔrɔ tuma caman na, nka a bɛnkan bɛ danfara ka kɛɲɛ ni kemikɛli suguya ye, a hakɛ, a funteni ani a tali waati. Baarakɛcogo kɔrɔlenw bɛ kɔrɔbɔli de wajibiya.

Surface ni Color Sugandili caman

Sugandili minnu bɛ sɔrɔ, olu bɛ se ka kɛ fini jɛman jɛlenw ye, minnu ɲɛ ye bulama ye, minnu ɲɛ ye bulama ye, minnu ɲɛ ye bulama ye, minnu bɛ manamana, minnu bɛ kɛ ni matɛri ye, minnu bɛ kɛ ni nɛnɛ ye ani minnu bɛ kɛ ni nɛnɛ gɛlɛnw ye.

Npogotiginin ni Recycled-Content Sugandiliw

Fura minnu bɛ kɛ ni fɛn wɛrɛw ye, olu bɛ se ka sɔrɔ izini baarakɛcogo bɛnnenw na. A jɛlen don, a kulɛri bɛ bɛn, a kasa, a masin baarakɛcogo ani a bɛnnen don sariyaw ma, olu ka kan ka jateminɛ danfara la ni PVC npogotiginin ye.

Thermoforming ani Vacuum-Forming Ladilikanw

Furakɛcogo min bɛ kɛ ni funteni ye, o bɛ bɔ PVC dilanni na, a bonya, a sɛbɛnfura sira, a funteni kelen-kelen, a dilannicogo, a dilanni juguya ani a nɛnɛcogo.

• Aw bɛ sɛbɛnfura sumaya cogo kelen na walasa ka sigida sɔgɔli, degun ani ɲɛnayeli tiɲɛni dɔgɔya.

• Aw bɛ PVC hakɛ bɛn ni foroko juguya ni a kɔnɔna jateminɛ ye.

• Aw bɛ mɔbili funteni ni a nɛnɛ kɔlɔsi walasa ka dɔ bɔ a tiɲɛni na a dilanni kɔfɛ.

• Aw bɛ kogo-kɛnɛya tilatilali lajɛ deep-draw yɔrɔw la.

• Tigɛcogo, a datugucogo ani a dalajɛli kɔrɔbɔ a yɔrɔ nɛnɛnen kɔfɛ.

• Aw bɛ a lajɛ ni fura dilannen bɛ dumuni, fura walima furakɛli sariyaw labatoli de wajibiya.

A ka ɲi ka fɛn dilanni kɔrɔbɔli kɛ ni thermoforming machine ani moule yɛrɛ ye sani ka sɔn komandiba ma.

Sɛbɛnni, Foli ani Fabrication

Écran, UV ani Offset sɛbɛnni

Sɛbɛnni jaabiw bɛ bɔ sanfɛla fanga la, enki chimie, kɛnɛya cogoya ani sanfɛla fini. Sannikɛlaw ka kan ka nɔrɔli, kulɛri cogoya, sɔgɔsɔgɔninjɛ kunbɛncogo ani foli-sira muɲuli kɔrɔbɔ.

Die-Cutting ani Punching (Bɔli) Kɛ

PVC finmanw bɛ se ka tigɛ ka kɛ pakew finɛtiriw ye, ka kɛ kartɔn profilw ye, ka kɛ tags ani inserts ye. Tigɛ tansiyɔn, die clearance, sheet temperature ani baarakɛminɛn cogoya bɛ nɔ bila dawolo jogo la.

Jatebɔ ni Foli

PVC hakɛ finman bɛnnenw bɛ se ka jate kɛ ka u da ka kɛ kɛsu ni bolokɔni jɛlenw ye. Kurukuruw jugumanba, foli radius walima fɛnw ɲɛsincogo jugu bɛ se ka kɛ sababu ye ka a fin walima ka kari.

Bending ani Fabrication (Bɔli ni Fabrication).

Milimɛtiri 1 ni milimɛtɛrɛ 3 sɛbɛnw ka bon, olu bɛ se ka tigɛ, ka u sɔgɔ, ka sira tigɛ, ka u kɔrɔta ani ka u dilan ka kɛ panɛriw ni datugulanw ye. Funteni-kɔrɔta cogoyaw ka kan ka kɔlɔsi walasa ka dan sigi bugunw, u kulɛri caman cili walima u bɔgɔbɔgɔli la.

Soudure ani Bonding min bɛ kɛ ni nɛgɛ ye

PVC yɔrɔ minnu bɛ bɛn ɲɔgɔn ma, olu bɛ se ka welda walima ka siri ni fɛɛrɛ bɛnnenw ye. Nɔrɔli bɛnkan, joli cogoya, a kɛnɛyali ani a fanga kuntaalajan ka kan ka sɛgɛsɛgɛ sani a ka kɛ jago la.

PVC sɛbɛn jɛlen baarakɛcogo

Blister ani Thermoformed Packaging (Blister ni thermoformé) min bɛ kɛ ni fɛnɲɛnamafagalan ye

PVC sɛbɛn finman bɛ se ka kɛ kurukuruw ye, ka kɛ fɛnɲɛnamafagalanw ye, ka kɛ sanubɔlanw ye, ka kɛ datugulanw ye ani ka kɛ feerefɛnw ye minnu bɛ mɔgɔ tanga, ka kɛ fɛnw ye minnu bɛ kɛ ka mɔgɔw bila ka taa, ɛntɛrinɛti, tulonkɛfɛnw ani fɛn wɛrɛw.

Boxes pliants transparentes (Boxs pliants) minnu bɛ kɛ ka jɛya

PVC jɛlen bɛ se ka sɛbɛn, ka die tigɛ, ka kurukuru ani ka da ka kɛ ɲɛgɛnw kɛsu ye, kado kɛsu, ɛntɛrinɛti foroko, sɛbɛnnikɛlan kɛsu ani laseli kɛsu.

Sɛbɛnni ni taamasiyɛnw sɛbɛnni

PVC min bɛ se ka sɛbɛnni kɛ, o bɛ se ka kɛ ja pannew ye, taamasiyɛnw minnu bɛ fɛnw laseli kɛ, dumunifɛnw datugulanw, sɛbɛnw datugulanw, jiralanw ani sannikɛyɔrɔ fɛnw.

Sɛbɛnnifɛnw ani Binding

Baarakɛminɛnw ye kaye datugulanw, sirilanw, foli, sɛbɛnw finɛtiriw, tilayɔrɔbaw, karti minɛyɔrɔw ani sɛbɛnnikɛlan yɔrɔ wɛrɛw ye minnu bɛ ye kɛnɛ kan.

Lakanalifɛnw ni Garadiw

Fɛnɲɛnɛma minnu ka bon, olu bɛ se ka dilan ka kɛ minɛnw datugulanw ye, lakanalanw, masinw kɔlɔsibagaw, buguri datugulanw ani yɔrɔ jɛlenw walasa ka baara kɛ ni u ye so kɔnɔ cogo la min bɛ kɔlɔsi.

Displays ani Panneau Décoratifs

PVC jɛlen ni kulɛrilen bɛ se ka kɛ fɛnw jiracogo ye, feerekɛyɔrɔw, jiralifɛnw, finidonfɛnw ani fɛn yetaw-jagokɛyɔrɔw.

Fabrication Industrielle (Industrie Fabrication) ye

Industriw ka baarakɛcogo dɔw ye misaliw ye, danfaralanw, lakanani finiw, datugulanw dilannenw, sɛgɛsɛgɛli finɛtiriw ani plastiki fɛnw minnu dilannen don ka kɛɲɛ ni mɔgɔw sago ye.

Aw ye fɛn wɛrɛw sɛgɛsɛgɛ PVC sɛbɛnw dilanni minnu bɛ kɛ ka sɛbɛnni kɛ, ka u pakew dilan, ka u dilan ani ka u dilanni kɛ iziniw kɔnɔ.

PVC jɛlen ni PET, PETG ani Polikarbonati

PVC sɛbɛn ɲɛnama sugandilenw

• A janya jiralenw ye milimɛtɛrɛ 0,1, milimɛtɛrɛ 0,2, milimɛtɛrɛ 0,3, milimɛtɛrɛ 1 ani milimɛtɛrɛ 3 ye.

• Sɛbɛn minnu bɛ kɛ ka kɛɲɛ ni sariya ye, sɛbɛn minnu tigɛra ka kɛɲɛ ni mɔgɔw sago ye, sɛbɛnw ani slit rolls.

• Kulɛri jɛlenw, minnu ɲɛ ye bulama ye, minnu ɲɛ ye jɛlen don ani minnu tɛ ye.

• Yɔrɔ minnu bɛ manamana, minnu ɲɛ ye bulama ye, minnu bɛ kɛ ni nɛnɛ ye ani minnu bɛ kɛ ni nɛnɛ gɛlɛn ye.

• Printing-grade, folding-box-grade ani thermoforming-grade furakɛlicogo.

• Sugandili minnu bɛ kɛ npogotiginin walima minnu bɛ segin ka kɛ fɛn wɛrɛw ye, ka kɛɲɛ ni baarakɛcogo bɛnnen ye.

• Filimu min bɛ mɔgɔ tanga walasa ka baara kɛ ni a ye min bɛ se ka sɔgɔsɔgɔ ani ka taa ni a ye.

• Tigɛcogo, tigɛcogo, pakew dilanni ani palɛti wajibiyalenw.

• Misaliw minnu bɛ kɛ ka kɛnɛya, sɛbɛnni, foli, foroko ani fɛn dilanni sɛgɛsɛgɛliw kɛ.

Kunnafoni minnu ka kan ka kɛ walasa ka PVC sɛbɛn jɛlen sɔrɔ

• A ka kan ka kɛ ka a janya ni a bonya muɲu.

• Sɛbɛn hakɛw, rollo bonya, rollo janya walima tigɛ-yɔrɔ hakɛ.

• Kulɛri jɛlen finman, bulu-tinted walima custom color.

• Yɔrɔ min bɛ manamana, a bɛ kɛ ni matiri ye walima a bɛ kɛ ni nɛnɛ ye.

• A wajibiyalen don kɛnɛya, sisi walima ɲɛnayeli yecogo.

• Sɛbɛnni, foli, die-cutting, thermoforming walima fabrication fɛɛrɛ.

• Npogotiginin-materiel walima recycled-content wajibiyalen.

• Protective-film ani pakew wajibiyalenw.

• Kɔrɔbɔli hakɛ, caman hakɛ ani san ɲinini.

• Jamana min bɛ taa, kurunbonkarila, jago waati ani a lase don wajibiyalen.

• Dumuni-ɲini, furakɛli, furakɛli, RoHS, REACH walima sariya wɛrɛw labatoli.

Aw ye aw ka PVC sɛbɛn wajibiyalenw ci

Jogoɲumanya ni sariya labatoli jateminɛw

Sɛbɛn minnu bɛ sɔrɔ, olu bɛ se ka kɛ sɛgɛsɛgɛli rapɔɔriw ye minnu ɲɛsinnen bɛ RoHS ma ani ISO jogoɲumanya walima sigida lakanani sɛbɛnw. Sannikɛlaw ka kan k’a jira ko sɛbɛn in bɛ tali kɛ PVC dilanni tigitigi ni komandi ɲɛfɔli la.

ISO 9001 ni ISO 14001 bɛ tali kɛ ɲɛnabɔli siratigɛ la, wa u man kan ka jira iko seereya tilennen min b’a jira ko PVC sɛbɛn bɛɛ bɛnnen don baarakɛcogo kɛrɛnkɛrɛnnen dɔ ma min bɛ sariya kɔnɔ.

Standard industriel PVC sheet man kan ka jate a yɛrɛma ko a bɛ dumuniko, furakɛli, furakɛli walima tulonkɛfɛnw ɲinini tilennenw dafa. Baarakɛcogo laɲininen, mɔgɔw ka ɲɔgɔn sɔrɔcogo ani taayɔrɔ-sɔgɔli sariyaw ka kan ka fɔ sani aw ka komandi kɛ.

PVC min kɔnɔfɛnw bɛ segin ka kɛ fɛn wɛrɛ ye, o bɛ se ka kɛ ko a tɛ jɛya, ka kulɛri kɛ walima ka sariyaw di i n’a fɔ PVC npogotiginin. A ka kan ka jateminɛ ka kɛɲɛ ni a kɛcogo yɛrɛ ye.

Kɛnɛma baarakɛcogo ani baarakɛcogo funteni

A ka c’a la, PVC jɛlen sɛbɛnfura bɛ sugandi ka kɛ so kɔnɔ walima baarakɛcogo kɔrɔsilenw kama. Ni tile yeelen bɛ mɛn sen na, o bɛ se ka kɛ sababu ye ka a ɲɛw wuli, ka a ɲɛda cogoya Changer walima ka masin baara bɔnɛ fo ni kɛnɛma hakɛ dɔ fɔra min bɛ sabati ni UV ye.

Ji kunbɛnni dɔrɔn tɛ PVC sɛbɛnfura jɔnjɔn kɛ min bɛnnen don kɛnɛma baara ma kudayi. UV bɔli, fiɲɛ doni, funteni cycle, jiginni kɛcogo ani baarakɛcogo wajibiyalenw ka kan ka jateminɛ.

Funteni hakɛ min bɛ se ka baara kɛ, o bɛ bɔ PVC dilanni na, a bonya la, a doni masin na ani a bilali waati la. Baarakɛcogo kɔrɔlenw bɛ fɛɛrɛko kunnafoniw de wajibiya minnu bɛ tali kɛ kalasi kɛrɛnkɛrɛnnenw na ani cogoya lakika sɛgɛsɛgɛli.

Ladilikan minnu bɛ kɛ ka misali ni jogoɲini sɛgɛsɛgɛliw kɛ

• A bonya, a bonya, a janya ani a hakɛ muɲuni.

• Kɛnɛya, sisi, kulɛri ton ani nɔgɔ yelenw.

• A ɲɛda bɛ manamana, a ma ɲɛ walima a bɛ kɛ ni nɛnɛ ye.

• Scratch cogoya ani protective-film bɛnkan.

• Printing adhesion, furakɛli ani abrasion resistance.

• Die-cutting ani edge jogo ɲuman.

• Foli, crease whitening ani cracking kɛcogo.

• Thermoforming temperature, ja juguya ni kogo-janya tilali.

• Bending, drilling, routing, bonding walima welding baarakɛcogo.

• Kemisɛri, kɛnɛma ani funteni baarakɛcogo ni a bɛ se ka kɛ yɔrɔ min na.

• Labatoli rapɔɔri minnu wajibiyalen don walasa ka ɲɛfɔli tigitigi sɔrɔ.

Foroko ni fɛnw lasecogo sugandicogo

Misaliw foroko : A4 sɛbɛnw walima misali hakɛ danmadɔw minnu bɛ kɛ bɔrɔw walima kartɔnw kɔnɔ minnu bɛ mɔgɔ tanga.

Sɛbɛnw foroko : Kilo 30 ɲɔgɔn foroko kelen kɔnɔ, walima a bɛ kɛ ka kɛɲɛ ni a bonya ni a minɛcogo wajibiyalenw ye.

Surface protection : Filimu min bɛ mɔgɔ tanga, PE wrapping, kraft paper ani interlayer fɛnw bɛ se ka kɛ walasa ka dɔ bɔ sɔgɔsɔgɔninjɛw la.

Palɛti foroko : Kilo 500-2000 ɲɔgɔn plywood palɛti kelen na, ka kɛɲɛ ni sɛbɛn hakɛ ni doni wajibiyalenw ye.

Minɛn doni : A bɛ se tɔni 20 ma, ka kɛɲɛ ni a foroko, a bonya ani a girinya dantigɛli ye.

Lasecogo: EXW, FOB, CNF ani jagokɛcogo wɛrɛw minnu bɛnna.

A dilanni waati danma: Tile 10-14 ɲɔgɔn, a ɲɛfɔcogo ni a sarali dafalen kɔfɛ.

A dilanni waati tɛ don jamana wɛrɛw ka cikanw na. Kulɛri minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, u janya minnu tɛ deli ka kɛ, filimu min bɛ mɔgɔ tanga ani sariya labatoli kɛrɛnkɛrɛnnenw, olu bɛ se ka waati janya.

PVC sɛbɛn jɛlenw dilanni yɔrɔw

Sɛbɛnw ni jogoɲumanya sɛbɛnw

HSQY bɛ se ka jogoɲumanya, sigida lakanani ani fɛn dilannenw sɛgɛsɛgɛli sɛbɛnw di minnu bɛ sɔrɔ walasa ka u dafa. Rapport minnu wajibiyalen don, olu ka kan ka lajɛ ka kɛɲɛ ni jatebɔ hakɛ tigitigi ye min yamaruyara.

HSQY Duniya Ɲɛjiraliw

Mun na i bɛ HSQY sugandi ka kɛ i ka PVC sɛbɛn jɛlen dilanbaga ye?

• PVC sɛbɛn gɛlɛnw jɛlenw ka bɔ milimɛtɛrɛ 0,1 na ka se milimɛtɛrɛ 3 ma.

• A bɛ sɔrɔ milimɛtɛrɛ 0,1, milimɛtɛrɛ 0,2, milimɛtɛrɛ 0,3, milimɛtɛrɛ 1 ani milimɛtɛrɛ 3 suganditaw la.

• Sheets, custom-cut pieces, rolls ani slit rolls.

• Sɛbɛnni, foli-kɛsu ani thermoforming grades.

• Sugandili minnu bɛ kɛnɛya, tintin, kulɛri, glossy, matte ani frosted.

• Furakɛcogo npogotigininw ni kɔnɔkow lasegincogo poroze bɛnnenw kama.

• Filimu min bɛ mɔgɔ tanga ani ka fɛnw bila ka taa jamana wɛrɛw la minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Misaliw minnu bɛ kɛ ka sɛbɛnni, foroko ani fɛn dilanni sɛgɛsɛgɛliw kɛ.

• Dɛmɛ min bɛ kɛ ka fɛn caman dilan, ka ɲɛsin fɛn caman tigɛli ma, fɛn tilabagaw ani OEM porozɛw ma.

Sani u ka fɛn caman dilan, sannikɛlaw ka kan ka PVC sɛbɛn sugandilen kɔrɔbɔ n’u ka tintin yɛrɛ ye, n’u ka baarakɛminɛnw ye, n’u ka thermoforming mold ye, n’u ka crease design ye, n’u ka nɔrɔli ye ani n’u ka fɛn dilanni minɛnw ye.

Aw ye HSQY lajɛ walasa ka misaliw ni sɔngɔko dɔn

Ɲininkali minnu bɛ kɛ tuma caman na PVC sɛbɛn jɛlen kan

PVC sɛbɛn gɛlɛn jɛlen ye mun ye?

O ye PVC sɛbɛn jɛlen ye, min tɛ plastiki ye walima min plastiki ka dɔgɔn, min bɛ kɛ ka sɛbɛnni kɛ, ka thermoforming, ka kɛsu da, ka pakew, jiralanw, datugulanw ani plastiki yɔrɔ dilannenw kɛ.

Fɛnɲɛnɛma jumɛnw bɛ sɔrɔ?

Fɛn minnu bɛ sɔrɔ nin ɲɛ in kan, olu hakɛ ye milimɛtɛrɛ 0,1 fo milimɛtɛrɛ 3 ye, o la, milimɛtɛrɛ 0,1, milimɛtɛrɛ 0,2, milimɛtɛrɛ 0,3, milimɛtɛrɛ 1 ani milimɛtɛrɛ 3 janya minnu bɛ ɲini tuma caman na.

PVC 0,1 mm transparent sɛbɛn bɛ kɛ mun na?

Milimɛtiri 0,1 sɛbɛn bɛnnen don sɛbɛnnikɛlan finmanw ma, pakew finɛtiri nɔgɔmanw, datugulanw, sɛbɛnnikɛlanw ani baara wɛrɛw minnu bɛ fɛn caman sɛgɛsɛgɛ sanni ka kɛ jɔli gɛlɛya ye.

PVC 0,2 mm transparent sɛbɛn bɛ kɛ mun na?

A ka ca a la, milimɛtɛrɛ 0,2 sɛbɛn bɛ kɛ ka kurukuruw foroko, kɛsu finmanw dabɔlenw, pake sɛbɛnnenw, finɛtiriw ani fɛn nɔgɔlenw minnu dilannen don ni funteni ye.

PVC jɛlen milimɛtɛrɛ 0,3 bɛ kɛ mun na?

Militiri 0,3 sɛbɛn bɛ dɛmɛ caman di ka tɛmɛ milimɛtɛrɛ 0,1 walima milimɛtɛrɛ 0,2 fɛn kan, wa a ka c’a la, a bɛ sugandi kɛsu dabɔlenw kama, feerekɛyɔrɔw ka pakew, sɛbɛnnikɛlanw datugulanw, jiralanw ani foroko dilannenw kama.

Yala PVC sɛbɛn min bɛ se ka kɛ milimɛtiri 1 ye, o ka gɛlɛn wa?

PVC sɛbɛn milimɛtɛrɛ 1 bɛ gɛlɛya kosɛbɛ ka tɛmɛ pake finmanw kan. Gɛlɛya banbali fana bɛ bɔ panɛri hakɛw la, dɛmɛnanw ni ɲɔgɔn cɛ, funteni ani a dilanni na.

PVC 3 mm transparent sɛbɛn bɛ kɛ mun na?

Militiri 3 sɛbɛn bɛnnen don panɛri gɛlɛnw ma, lakanalanw, minɛnw datugulanw, jiralanw, tilayɔrɔw, misaliw ani izini yɔrɔ dilannenw.

Yala PVC sɛbɛn jɛlen bɛ se ka kɛ thermoformé ye wa?

Awɔ. Kalanso bɛnnenw bɛ se ka kɛ ni fɛnɲɛnamafagalan ye walima ka kɛ ni funteni ye ka kɛ kurukuruw ye, sanubɔlanw, datugulanw ani pakew yɔrɔw cogoya. A ka ɲi ka fɛn dilanni kɔrɔbɔli kɛ.

Yala PVC sɛbɛn jɛlen bɛ se ka sɛbɛn wa?

Awɔ. PVC min bɛ se ka sɛbɛnni kɛ, o bɛ se ka ekran, UV ani offset sɛbɛnni dɛmɛ, enki, surface ani curing bɛnkan dafalen kɔfɛ.

Yala PVC sɛbɛn jɛlen bɛ se ka da ka kɛ kɛsu kɔnɔ wa?

Foli-kɛsu finmanw bɛ se ka tigɛ ka sa, ka jate kɛ ani ka foli kɛ ka kɛ kartɔn jɛlenw ye. A janya, a suman sira, a kurulen jugumanba ani a foli janya bɛ nɔ bila finman ni kari la.

Yala PVC sɛbɛn jɛlen bɛ se ka tigɛ ka kɛɲɛ ni a bonya ye wa?

Awɔ. Ladamuni hakɛw, sɛbɛn tigɛlenw ani slit rolls bɛ se ka baro kɛ ka kɛɲɛ ni u bonya, muɲuli, minɛnw ani komandi hakɛ ye.

Yala filimu min bɛ mɔgɔ tanga, o bɛ sɔrɔ wa?

Filimu min bɛ mɔgɔ tanga, o bɛ se ka di fɛn sugandilenw ma walasa ka dɔ bɔ u ɲɛda sɔgɔsɔgɔli la u tali, u sɛbɛnni, u dilanni ani u lajɛli waati.

Yala PVC sɛbɛn jɛlen tɛ ji bɔ wa?

PVC tɛ ji minɛ nɔgɔya la, wa a bɛ yɔrɔ di min tɛ ji bɔ. O tɛ kɛ sababu ye ka pake walima a lajɛlen kɛ a yɛrɛma, ji tɛ se ka don a kɔnɔ pewu.

Yala PVC sɛbɛn jɛlen bɛ se ka kɛ kɛnɛma wa?

PVC jɛlen min bɛ kɛ ka kɛɲɛ ni sariya ye, o dabɔra caman na so kɔnɔ walima sigida minnu bɛ kɔlɔsi. Kɛnɛma baarakɛcogo bɛ se ka kɛ sababu ye ka UV sabatili ni sɛgɛsɛgɛli kɛ waati, funteni ani baara waati makɔnɔnenw na.

Yala PVC jɛlen bɛnnen don dumuniw foroko kɔnɔ wa?

A bɛnnen don, o bɛ bɔ resin tigitigi la, faralifɛnw, a dilanni cogoya, dumuni suguya, ɲɔgɔn sɔrɔli cogoya ani taayɔrɔ-sugu sariyaw. Dumuni ni ɲɔgɔn cɛ wajibiyalenw ka kan ka fɔ sani aw ka komandi kɛ.

Yala PVC jɛlen min bɛ sɔrɔ fɛn wɛrɛw la, o bɛ sɔrɔ wa?

Fura minnu kɔnɔfɛnw bɛ segin ka kɛ fɛn wɛrɛw ye, olu bɛ se ka sɔrɔ walasa ka baara kɛcogo bɛnnenw kɛ. Fɛn jɛlen, kulɛri, masinw cogoya ani sariya labatoli ka kan ka jateminɛ ni misali ye min dabɔra.

Danfara jumɛn bɛ PVC finman jɛlen ni ɲɛ bulu cɛ?

PVC finman jɛlen bɛ yecogo ye min tɛ fɛn wɛrɛ ye, ka sɔrɔ PVC min ɲɛ ye bulama ye, o bɛ ni ton bulu dɔɔni ye min bɛ se ka ɲɛda jɛmanw bɔ ɲɔgɔn na. Farikoloɲɛnajɛ dɔ ka kan ka sɔn.

Yala PVC transparent matte walima frosted bɛ sɔrɔ wa?

Awɔ. Mati, nɛnɛ nɔgɔlen ani nɛnɛ gɛlɛnw bɛ se ka baro kɛ walasa ka yeelen dɔgɔya, ka yecogo jɛnsɛn ani ka masirifɛnw kɛ.

MOQ ye mun ye PVC sɛbɛn jɛlenw na?

MOQ sariyalen min bɛ nin fura in na, o ye kilo 1000 ye. Kulɛri minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, hakɛ minnu tɛ deli ka kɛ, kalasi kɛrɛnkɛrɛnnenw walima lakanani-filimu wajibiyalenw bɛ se ka kɛ ni MOQ wɛrɛ ye.

Yala PVC sɛbɛnw misali jɛlenw bɛ sɔrɔ wa?

Awɔ. A4 walima hakɛ danmadɔw bɛ se ka di walasa ka kɛnɛya, u bonya, u sɛbɛnni, u dacogo, u dilanni ani u dilanni lajɛ. A ka c’a la, doni bɛ sara sannikɛla fɛ.

A dilanni ɲɛminɛ waati ye mun ye?

A dilanni waati bɛ kɛ tile 10-14 ɲɔgɔn na, fɛn ɲɛfɔlenw ni sarali dafalen kɔfɛ. Fɛn minnu dilannen don ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka waati wɛrɛ wajibiya.

Kunnafoni jumɛnw de ka kan ka kɛ walasa ka quotation sɔrɔ?

Aw bɛ a janya, a bonya, a hakɛ, a kulɛri, a jɛlen, a sanfɛla fini, a baaracogo, a kɔnɔfɛnw diyabɔli, a foroko, a taayɔrɔ ani a sariya labatoli sɛbɛnw di.

Aw ye PVC sɛbɛn ɲɛnama dɔ sɔrɔ min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye