0.1mm 0.2mm 0.3mm 1mm Pvc agbalẽvi si me kɔ 3Mm

Nukae Nye Nuka Sesẽ si Me Kɔkɔme Le PVC ƒe Agbalẽ ?

PVC agbalẽ dzi nyawo si me kɔ nye polyvinyl chloride nusi me kɔ, si sesẽ si wozãna tsɔ wɔa dzoxɔxɔ ƒe nɔnɔme, agbalẽtata, aɖaka siwo wobla, blister ƒe babla, ametakpɔnu nutsyɔnu, agbalẽŋlɔnuwo, asitsaƒewo ƒe ɖeɖefiawo kple plastik ƒe akpa siwo wowɔ.

HSQY naa PVC agbalẽ dzi nyawo s sesẽ siwo me kɔ le titrime siwo wobia zi geɖe siwo nye 0.1 mm, 0.2 mm, 0.3 mm, 1 mm kple 3 mm. Adzɔnu ƒe hatsotso si woɖo ɖi na axa sia nye 0.1 mm va ɖo 3 mm, kple agbalẽ dzi nyawo ƒe didime, amadede kple anyigba ƒe nuwuwu siwo wowɔ ɖe ɖoɖo nu le ewɔwɔ ƒe ŋutete nu.

Zi geɖe la, wotiaa nu tsɛ siwo ƒe didime nye milimeta 0.1 va ɖo milimeta 0.3 PVC hena agbalẽtata, nubablɛ ƒe fesrewo, aɖaka siwo woate ŋu abla siwo ƒe kpekpeme le bɔbɔe, blister packs kple akpa tsɛ siwo wotsɔ dzoxɔxɔ wɔe. 1 mm kple 3 mm agbalẽ dzi nyawo s siwo ƒe titrime naa sesẽ geɖe wu na ametakpɔnu, nukpɔkpɔwo, mɔ̃ ƒe nutsyɔnu, nɔnɔmetatawo kple akpa siwo wowɔ.

Nusiwo woate ŋu atia ate ŋu anye ɖetugbui leaƒe PVC alo atike siwo me nusiwo wogbugbɔ zã. Zi geɖe la, wolɔ̃a Virgin-grade PVC ne wobia be eme kɔ ŋutɔ, amadede si mewɔa tɔtrɔ o, wɔwɔme ƒe dɔwɔwɔ si dzi wokpɔ alo dɔwɔwɔ tɔxɛ ƒe sedziwɔwɔ.

Ele be nuƒlelawo natsɔ titrime, didime, nusiwo me kɔ, anyigba ƒe nuwuwu, dɔwɔwɔ ƒe mɔnu, agbɔsɔsɔme kple asi si woɖo taɖodzinu na ƒe nudidi siwo hiã ale be HSQY nate ŋu akafu PVC ƒe dzesi si sɔ.

Bia Gbeƒãɖeɖe PVC ƒe Agbalẽ Asixɔxɔ    Bia PVC ƒe Agbalẽ Kpɔɖeŋu

Transparent PVC ƒe Agbalẽ Nɔnɔmetatawo

Transparent PVC ƒe Agbalẽ Nyatakakagbalẽviwo

Dzro mɔ̃ɖaŋu ŋuti nyatakaka siwo li kple dodokpɔ ŋuti nuŋlɔɖi siwo le ete la me. Ele be nuƒlelawo naɖo kpe edzi be nuŋlɔɖi ɖesiaɖe ku ɖe PVC ƒe wɔwɔme, titrime, amadede kple ewɔwɔ ƒe nɔnɔme si tututu wole ƒlem la ŋu.

       Wɔ Transparent PVC ƒe Agbalẽ Nyatakakagbalẽvi ƒe kɔpi                    Wɔ Dodokpɔ ƒe Nyatakaka si me kɔ PVC ƒe Agbalẽ ƒe kɔpi        

Transparent PVC ƒe Agbalẽ Nyatakakawo

Ele be woaɖo kpe titrime mamlɛtɔ ƒe mɔɖeɖe, kekeme ƒe mɔɖeɖe, nukpɔkpɔ le gaglãgbe, amadede, anyigba ƒe nuwuwu kple dɔwɔwɔ ƒe dɔwɔwɔ dzi to kpɔɖeŋu si dzi woda asi ɖo, mɔ̃ɖaŋununya ƒe nɔnɔmetata alo nuƒle ƒe nubabla dzi.

Alesi Nàtia 0.1 mm, 0.2 mm, 0.3 mm, 1 mm alo 3 mm PVC ƒe Agbalẽ

Titrime kpɔa ŋusẽ ɖe asitɔtrɔ le nɔnɔmewo ŋu, sesẽme, wɔwɔme ƒe goglome, babla ƒe nuwɔna, ŋusẽkpɔɖeamedzi ƒe dɔwɔwɔ kple nusi wowɔ vɔ ƒe kpekpeme dzi. Tabla si gbɔna la na mɔfiame siwo ku ɖe tiatiawɔwɔ ŋu le mɔ gbadza nu.

Kafukafunya siawo nye esiwo ku ɖe nusianu ŋu. Sheet ƒe didime, kpeɖeŋutɔ ƒe dometsotso, wɔwɔme ƒe goglome, nusi wowɔ ƒe kpekpeme, dɔwɔnuwo kple subɔsubɔ ƒe dzoxɔxɔ ateŋu atrɔ titrime si hiã.

Thin PVC Film vs. Titri Sesẽ PVC ƒe Agbalẽ

Nu vevi siwo le Transparent PVC ƒe Agbalẽ me.

Adzɔnuwo ƒe Nukpɔkpɔ Deŋgɔ

Klɔ PVC ɖe mɔ na adzɔnuwo, nɔnɔmetatawo kple akpa siwo le megbe na agbalẽ dzi nyawo be woanɔ dzedzem. Esia na wòsɔ na nubablɛwo, nukpɔkpɔ fesrewo, ametakpɔnu nutsyɔnuwo kple asitsaƒewo ɖeɖefia.

Sesẽme Ŋudɔwɔwɔ Kple Agbɔsɔsɔme ƒe Liƒo

Rigid PVC léa eƒe nɔnɔme me ɖe asi le asiléle ƒe nɔnɔme siwo sɔ me eye wònaa kpekpeɖeŋu ŋutɔŋutɔ na nusiwo woxatsa, wowɔ kple esiwo wowɔ. Sesẽ ŋutɔŋutɔ nɔ te ɖe eƒe titrime kple alesi wowɔe dzi vevie.

Dzoxɔxɔ ƒe Nɔnɔmewɔwɔ ƒe Ŋutete

Woateŋu ado dzo na dzesi siwo sɔ eye woawɔ wo woazu ʋuʋudedi ƒe dowo, traywo dzi , nutsyɔnuwo kple akpa etɔ̃ bubuwo. Ele be woaɖo kpe dzoxɔxɔ, aŋɔ ƒe nɔnɔme kple fafa ƒe nɔnɔmewo dzi hafi woawɔe.

Agbalẽtata Kple Atsyɔ̃ɖoɖo

PVC ƒe anyigba siwo wodzra ɖo nyuie ate ŋu ado alɔ screen printing, UV printing, offset printing, foil stamping, labeling kple atsyɔ̃ɖoɖo ƒe nuwuwu. Ele be woado ink ƒe ɖekawɔwɔ kpɔ.

Tsitretsitsi ɖe Tsidzadza Ŋu

PVC mexɔa tsi bɔbɔe o eye ateŋu ana teƒe si tsi mate ŋu age ɖo o na nubablɛwo, nutsyɔnuwo kple dɔwɔƒewo ƒe akpawo. Mele be woawɔ nu ɖe ​​eŋu le eɖokui si be enye nusi xea mɔ na tsidzadza blibo o.

Atikewo ƒe Tsitretsitsi

PVC tsi tre ɖe atike geɖe siwo wodoa goe zi geɖe ŋu, gake woƒe sɔsɔ toa vovo le atike ƒe ƒomevi, woƒe agbɔsɔsɔ, dzoxɔxɔ kple ɣeyiɣi didi si wòxɔna nu. Dɔwɔwɔ veviwo bia be woado wo kpɔ.

Anyigba kple Amadede ƒe Tiatia Geɖewo

Tiatia siwo li ate ŋu anye ɣi si me kɔ, blɔ-tinted transparent, amadede si me kɔ, glossy, matte, light-frosted kple heavy-frosted nuwuwu.

Ðetugbi Nɔaƒe kple Nusiwo Wogbugbɔ Zã-Emenyawo Tiatia

Ðewohĩ atike siwo me wogbugbɔ zãe le la li na dɔwɔƒewo ƒe dɔwɔwɔ siwo sɔ. Ele be woada nusiwo me kɔ, amadede ƒe ɖekawɔwɔ, ʋeʋẽ, mɔ̃wo ƒe dɔwɔwɔ kple ɖoɖowɔwɔ ƒe nyonyome kpɔ ɖe vovo tso ɖetugbui leaƒe ƒe hatsotso PVC gbɔ.

Thermoforming kple Vacuum-Forming Mɔfiamewo

Dzoxɔxɔ ƒe dɔwɔwɔ nɔ te ɖe PVC ƒe wɔwɔme, eƒe titrime, agbalẽ dzi nyawo mɔfiame, dzoxɔxɔ ƒe ɖekawɔwɔ, aŋɔ ƒe nɔnɔme, wɔwɔ ƒe goglome kple fafa ƒe tsatsam dzi.

• Do dzo na agbalẽ dzi nyawo la sɔsɔe be nàɖe teƒea ƒe ƒuƒu, nuteɖeamedzi kple nukpɔkpɔ ƒe tɔtɔ dzi akpɔtɔ.

• Tsɔ PVC ƒe dzesi sɔ kple wɔwɔme ƒe goglome kple do ƒe nɔnɔme.

• Kpɔ aŋɔ ƒe dzoxɔxɔ kple fafa dzi be nàɖe eƒe tɔtɔ dzi akpɔtɔ le ewɔwɔ vɔ megbe.

• Kpɔ gli-titrime mama le deep-draw components me ɖa.

• Do lãɖeɖe, nutrenu kple eƒoƒo ɖe wo nɔewo dzi kpɔ ne akpaa fa keŋkeŋ vɔ.

• Kpɔe ɖa be nusi wowɔ vɔ la hiã nuɖuɖu, atike alo atikewɔwɔ ƒe sewo dzi wɔwɔ.

Wokafui be woado ewɔwɔ kpɔ to dzoxɔxɔ ƒe mɔ̃ ŋutɔŋutɔ kple aŋɔ zazã me hafi ada asi ɖe nudɔdɔ gã aɖe dzi.

Agbalẽtata, Babla kple Fabrication

Screen, UV kple Offset ƒe Agbalẽtata

Agbalẽtata me tsonu nɔ te ɖe ŋusẽ si le anyigba dzi, nuŋlɔtsi ƒe atikewɔwɔ, nɔnɔme siwo me woda gbe le kple anyigba ƒe nuwuwu dzi. Ele be nuƒlelawo nado alesi wòléna ɖe nu ŋu, eƒe amadede ƒe dzedzeme, alesi wòte ŋu nɔa te ɖe ʋuʋudedi nu kple alesi wòte ŋu blaa nui la kpɔ.

Die-Cutting kple Punching

Woateŋu atso PVC tsɛwo ɖe nubablɛ ƒe fesrewo, kakɛ ƒe nɔnɔmetatawo, dzesiwo kple nusiwo wotsɔ de eme me. Lãɖeɖe ƒe nyaƒoɖeamenu, ku ƒe ʋuʋu, agbalẽ dzi nyawo dzoxɔxɔ kple dɔwɔnu ƒe nɔnɔme kpɔa ŋusẽ ɖe nugbɔ ƒe nyonyome dzi.

Dzesidede kple Kpekpeɖeŋunana

Woate ŋu axɔ dzesi PVC ƒe dzesi tsɛ siwo sɔ eye woaƒo wo nu ƒu ɖe aɖaka kple abɔta siwo me kɔ me. Crease depth, folding radius alo material direction si mesɔ o ate ŋu ana wòazu ɣie alo agbã.

Bending kple Fabrication

Woateŋu atso 1 mm kple 3 mm agbalẽ dzi nyawo s siwo ƒe titrime wu, aku, akplɔ wo, abɔbɔ wo eye woawɔ wo woazu ʋuƒo kple nutsyɔnu. Ele be woakpɔ dzoxɔxɔ ƒe bɔbɔ ƒe nɔnɔmewo dzi be woaɖe kuɖɔwo, amadede ƒe tɔtrɔ alo woƒe tɔtrɔ dzi akpɔtɔ.

Welding kple Adhesive Bonding

Woateŋu aƒo PVC akpa siwo sɔ alo abla wo to mɔnu siwo sɔ zazã me. Ele be woado aŋenu ƒe ɖekawɔwɔ, ƒunukpeƒe ƒe dzedzeme, eƒe dɔyɔyɔ kple ŋusẽ si nɔa anyi didi kpɔ hafi woawɔe le asitsatsa me.

Dɔwɔwɔwo le Transparent PVC ƒe Agbalẽ

Blister kple Thermoformed Packaging

Woateŋu awɔ PVC agbalẽ dzi nyawo tsɛwo wòazu blister packs, clamshells, traywo dzi , nutsyɔnu kple ametakpɔnudzraƒe ƒe nubablɛwo na nuzazãwo, elektrɔniknuwo, fefenuwo kple nu bubuwo.

Aɖaka Siwo Woate Ŋu Abla si Me Kɔkɔe

Woateŋu ata PVC si me kɔ, atso ku, aƒoe eye woaxatsae ɖe atsyɔ̃ɖomiɖakawo, nunanaɖakawo, elektrɔniknuwo ƒe bablawo, agbalẽŋlɔɖakawo kple boblododo ƒe agbawo me.

Agbalẽtata Kple Dzesiwo

Woateŋu azã agbalẽtata ƒe dzeside PVC na nɔnɔmetata ƒe akpawo, boblododo dzesiwo, nuɖuɖu ƒe akpawo, agbalẽtata ƒe nutsyɔnu, nukpɔkpɔ ƒe akpawo kple nusiwo woƒle.

Nuŋlɔɖiwo Kple Nubabla

Dɔdamɔnuawo dometɔ aɖewoe nye nuŋlɔɖigbalẽ ƒe nutsyɔnu, agbalẽ babla ƒe nutsyɔnu, agbalẽdzraɖoƒe, nuŋlɔɖi ƒe fesre, mama, kaɖi ƒe nulénu kple agbalẽŋlɔmɔ̃ ƒe akpa bubu siwo me kɔ.

Ametakpɔnu Kple Dzɔlawo

Woateŋu awɔ agbalẽ dzi nyawo s siwo le kpekpem wu woazu dɔwɔnuwo ƒe nutsyɔnu, ametakpɔnu, mɔ̃dzikpɔlawo, ke ƒe nutsyɔnu kple mama siwo me kɔ hena xɔme zazã si dzi wokpɔna.

Nukpɔkpɔwo Kple Atsyɔ̃ɖoɖo ƒe Nɔnɔmetatawo

Woateŋu azã PVC si me kɔ eye wòle amadede me na adzɔnuwo ɖeɖefia, asitsaƒe ƒe akpawo, ɖeɖefia ƒe akpawo, atsyɔ̃ɖoɖo ƒe nusiwo wotsɔ de eme kple nukpɔkpɔ-asitsatsa ƒe xɔtuɖoɖowo.

Dɔwɔƒewo ƒe Atsyãwɔwɔ

Dɔwɔƒewo ƒe dɔwɔwɔwo dometɔ aɖewoe nye templates, separator agbalẽ dzi nyawo s, ametakpɔnu liners, formed covers, inspection windows kple plastic components siwo wowɔ ɖe ɖoɖo nu.

Dzro nu geɖe me PVC agbalẽ dzi nyawo nusiwo wowɔna na agbalẽtata, babla, wɔwɔme kple dɔwɔƒewo ƒe wɔwɔme.

Nusi me kɔ PVC tsɔ wu PET , PETG kple Polycarbonate

Custom Transparent PVC ƒe Agbalẽ Tiatiawɔblɔɖewo

• Woɖea woƒe titrime fiana siwo nye 0.1 mm, 0.2 mm, 0.3 mm, 1 mm kple 3 mm.

• Standard agbalẽ dzi nyawo s, custom-cut agbalẽ dzi nyawo s, agbalẽ xatsaxatsawo kple agbalẽ xatsaxatsa siwo wotso.

• Amadede ɣi siwo me kɔ, siwo ƒe amadede nye blɔ, amadede siwo me kɔ eye womekɔ o.

• Anyigba siwo le keklẽm, siwo ƒe amadede nye matte, siwo me tsikpe le bɔbɔe kple esiwo me tsikpe kpekpe le.

• Agbalẽtata-grade, agbalẽ xatsa-aɖaka-grade kple thermoforming-grade ƒe atikewo.

• Ðetugbui leaƒe alo nusiwo wogbugbɔ zã ƒe tiatia siwo le dɔwɔwɔ ƒe nyonyome nu.

• Takpɔnu film na scratch-sensitive dɔwɔwɔ kple ʋuɖoɖo.

• Custom lãɖeɖe, slitting, packaging kple pallet nudidiwo.

• Kpɔɖeŋuwo na nukpɔkpɔ le gaglãgbe, agbalẽtata, babla, wɔwɔ kple ewɔwɔ dodokpɔwo.

Nyatakaka Siwo Hiã Na PVC ƒe Agbalẽ Nyayɔyɔ si me kɔ

• Wobia be woate ŋu alɔ̃ ɖe eƒe titrime kple eƒe titrime dzi.

• Agbalẽvi ƒe didime, agbalẽ xatsaxatsa ƒe kekeme, agbalẽ xatsaxatsa ƒe didime alo agbalẽ xatsaxatsa ƒe lolome.

• Amadede ɣi si me kɔ, si ƒe amadede nye blɔ alo esi wowɔ ɖe ɖoɖo nu.

• Glossy, matte alo frosted anyigba.

• Wobia be woawɔ nu le gaglãgbe, aŋɔ alo nukpɔkpɔ ƒe dzedzeme.

• Agbalẽtata, babla, die-cutting, thermoforming alo fabrication mɔnu.

• Ðetugbui leaƒe-nu alo nusiwo wogbugbɔ zã-nudidi.

• Ametakpɔnu-film kple nubablɛ ƒe nudidiwo.

• Dodokpɔ ƒe agbɔsɔsɔme, agbɔsɔsɔ gbogbotɔ kple ƒe sia ƒe ƒe didi.

• Dukɔ si me woayi, melidzeƒe, asitsatsa ƒe ɣeyiɣi kple ŋkeke si wobia be woatsɔe vɛ.

• Nuɖuɖu-kadodo, atikewo, atikewɔwɔ, RoHS, REACH alo sedziwɔwɔ ƒe nudidi bubuwo.

Ðo Wò PVC ƒe Agbalẽ Nudidiwo ɖa

Nusiwo Ŋu Woabu le Dzedzeme Kple Sedziwɔwɔ Ŋu

Nuŋlɔɖi siwo li ate ŋu anye dodokpɔ ŋuti nyatakaka siwo ku ɖe RoHS ŋu kple ISO ƒe nyonyome alo nutomedzikpɔkpɔ ŋuti nuŋlɔɖiwo. Ele be nuƒlelawo naɖo kpe edzi be nuŋlɔɖia ku ɖe PVC ƒe wɔwɔme kple nudɔdɔ ƒe nɔnɔme si sɔ pɛpɛpɛ ŋu.

ISO 9001 kple ISO 14001 ku ɖe dɔdzikpɔkpɔ ƒe ɖoɖowo ŋu eye mele be woatsɔe afia abe ɖaseɖigbalẽ tẽ ene be PVC agbalẽ dzi nyawo ɖesiaɖe sɔ na dɔwɔwɔ tɔxɛ aɖe si ŋu wowɔ ɖoɖo ɖo o.

Mele be woabui le eɖokui si be dɔwɔƒewo ƒe PVC agbalẽ dzi nyawo ɖo nuɖuɖu-kadodo, atike, atikewɔwɔ alo fefenu ƒe nudidiwo gbɔ tẽ o. Ele be woagblɔ alesi woɖoe be woazãe, kadodo ƒe nɔnɔmewo kple afisi woayi-asi ƒe sewo hafi adɔ nu.

Recycled-content PVC ateŋu mana eme kɔ, amadede ƒe ɖekawɔwɔ alo ɖoɖowɔɖi ƒe nɔnɔmetata abe ɖetugbui leaƒe PVC ene o. Ele be woadae kpɔ le alesi wozãe ŋutɔŋutɔ nu.

Gbedoxɔ Zazã Kple Subɔsubɔdɔ ƒe Dzoxɔxɔ

Standard clear PVC agbalẽ dzi nyawo nye esi wotia zi geɖe na xɔme alo dziɖuɖu ƒe dɔwɔwɔwo. Ɣe ƒe keklẽ ɣeyiɣi didi ate ŋu ana amadede natrɔ, anyigba ƒe nɔnɔme natrɔ alo mɔ̃a ƒe dɔwɔwɔ nabu negbe ɖe wogblɔ gota gome ƒe dzesi si UV-si li ke hafi.

Tsi ƒe tsitretsitsi ɖeɖe mewɔa dzidzenu PVC agbalẽ dzi nyawo si sɔ na gota zazã tegbee o. Ele be woada UV ƒe ʋuʋu, ya ƒe agba, dzoxɔxɔ ƒe tsatsam, eɖoɖo ƒe mɔnu kple dɔwɔwɔ ƒe agbenɔƒe si hiã la akpɔ.

Dzoxɔxɔ ƒe didime si woateŋu azã nɔ te ɖe PVC ƒe wɔwɔme, eƒe titrime, mɔ̃ ƒe agba kple ɣeyiɣi didi si woatsɔ awɔe dzi. Dɔwɔwɔ veviwo bia mɔ̃ɖaŋu ŋuti nyatakaka siwo ku ɖe klass tɔxɛwo ŋu kple nɔnɔme ŋutɔŋutɔ dodokpɔ.

Kpɔɖeŋu Kple Eƒe Nyonyome Dodokpɔ Siwo Wokafu

• Titrime, kekeme, didime kple didime ƒe mɔɖeɖe ɖe nu ŋu.

• Nusiwo me kɔ, aŋɔ, amadede ƒe amadede kple ɖiƒoƒo siwo woate ŋu akpɔ.

• Glossy, matte alo frosted anyigba ƒe nɔnɔme.

• Scratch nɔnɔme kple ametakpɔnu-film ƒe ɖekawɔwɔ.

• Agbalẽtata ƒe adhesion, dɔyɔyɔ kple abrasion tsitretsitsi.

• Die-cutting kple nugbɔ ƒe nyonyome.

• Folding, crease ɣie kple gbagbã ƒe nuwɔna.

• Thermoforming dzoxɔxɔ, he goglome kple gli-titrime mama.

• Bending, drilling, routing, bonding alo welding dɔwɔwɔ.

• Atike, gota kple dzoxɔxɔ ƒe dɔwɔwɔ le afisi wòsɔ le.

• Sedziwɔwɔ ŋuti nyatakaka siwo hiã hena nyatakaka si tututu wogblɔ.

Nubablɛwo Kple Wo Ðoɖo Ðe Amewo ƒe Tiatiawɔblɔɖe

Kpɔɖeŋu ƒe babla: A4 agbalẽ dzi nyawo s alo kpɔɖeŋu siwo ƒe lolome seɖoƒe li na siwo wobla ɖe ametakpɔkotoku alo kakɛwo me.

Agbalẽvi ƒe babla: Anɔ abe kilogram 30 ene le agba ɖeka me, alo woatrɔ asi le eŋu le eƒe lolome kple alesi woawɔe nu.

Takpɔkpɔ le anyigba dzi: Woate ŋu azã ametakpɔnu film, PE wrapping, kraft paper kple interlayer nusiwo woatsɔ aɖe ʋuʋudedi dzi akpɔtɔ.

Pallet ƒe babla: Anɔ abe kilogram 500-2000 ene le plywood pallet ɖeka me, le agbalẽ dzi nyawo ƒe lolome kple agbatsɔtsɔ ƒe nudidiwo nu.

Agbatsɔtsɔ le nugoe me: Anɔ abe tɔn 20 ene, le mɔxexe ɖe nugoewo ƒe babla, didime kple nugoe ƒe kpekpeme nu nu.

Nusiwo woatsɔ aɖoe: EXW, FOB, CNF kple asitsatsa ƒe ɖoɖo bubu siwo dzi wolɔ̃ ɖo.

Ɣeyiɣi si wozãna tsɔ wɔa nuawoe: Anɔ abe ŋkeke 10-14 ene le esi woɖo kpe nya si wogblɔ kple fexexe dzi vɔ megbe.

Ɣeyiɣi si woatsɔ awɔe melɔ dukɔwo dome meliɖoɖo ɖe eme o. Amadede siwo wowɔ ɖe ɖoɖo nu, woƒe titrime si mebɔ o, ametakpɔnu film kple sedziwɔwɔ ƒe nudidi tɔxɛwo ate ŋu adidi ɣeyiɣi si woatsɔ awɔ dɔa ɖe edzi.

Transparent PVC ƒe Agbalẽ Dɔwɔƒewo ƒe Dɔwɔƒewo

Ðaseɖigbalẽwo Kple Dzedzeme Ŋuti Nuŋlɔɖiwo

HSQY ateŋu ana nyonyome-dzikpɔkpɔ, nutome-dzikpɔkpɔ kple adzɔnuwo dodokpɔ ŋuti nuŋlɔɖi siwo li hena kpeɖodzi. Ele be woato nyatakaka siwo wobia tso wo si la me le dzesi si tututu woɖo ɖi la nu.

HSQY Xexeame Katã ƒe Nukpɔkpɔwo

Nukatae Nàtia HSQY abe Wò Transparent PVC ƒe Agbalẽ Nudzrala ene?

• Transparent rigid PVC agbalẽ dzi nyawo s tso 0.1 mm va ɖo 3 mm.

• Woɖe 0.1 mm, 0.2 mm, 0.3 mm, 1 mm kple 3 mm ƒe tiatia fia.

• Agbawo, kakɛ siwo wotso ɖe ɖoɖo nu, agbalẽ xatsaxatsawo kple agbalẽ xatsaxatsa siwo woɖe ɖe vovo.

• Agbalẽtata, folding-box kple thermoforming ƒe dzesiwo.

• Tiatia siwo me kɔ, amadede, amadede, keklẽ, matte kple frosted tiatia.

• Ðetugbui leaƒe kple nusiwo wogbugbɔ zã ƒe atikewo na dɔ siwo sɔ.

• Film si kpɔa ame ta kple nusiwo wotsɔ ɖoa ​​duta siwo wowɔ ɖe ɖoɖo nu.

• Kpɔɖeŋuwo na agbalẽtata, wɔwɔme kple ewɔwɔ dodokpɔwo.

• Bulk ewɔwɔ ƒe kpekpeɖeŋu na converters, distributors kple OEM dɔwo.

Hafi woawɔ nu geɖe la, ele be nuƒlelawo nado PVC agbalẽ dzi nyawo si wotia la kpɔ kple woƒe ink ŋutɔŋutɔ, dɔwɔnuwo, thermoforming mold, crease design, adhesive kple fabrication dɔwɔnuwo.

Te ɖe HSQY ŋu hena Kpɔɖeŋuwo kple Asixɔxɔ

Nya Siwo Wobia Enuenu Tso Transparent Ŋu PVC ƒe Agbalẽ

Nukae nye nusi me kɔ si me kɔ PVC agbalẽ dzi nyawo ?

Enye nusi me kɔ, si wometsɔ aŋɔ wɔe o alo esi mewɔa aŋɔ boo o PVC agbalẽ dzi nyawo si wozãna na agbalẽtata, dzoxɔxɔ ƒe nɔnɔme, aɖaka siwo wobla, nubablɛwo, nukpɔkpɔwo, nutsyɔnuwo kple plastik ƒe akpa siwo wowɔ.

Titrime kawoe li?

Adzɔnuwo ƒe hatsotso si wozãna ɖaa le axa sia dzi nye 0.1 mm va ɖo 3 mm, si me 0.1 mm, 0.2 mm, 0.3 mm, 1 mm kple 3 mm ƒe titrime siwo wobia zi geɖe hã le.

Nukae wozãna na 0.1 mm transparent PVC agbalẽ dzi nyawo ?

0.1 mm agbalẽ dzi nyawo sɔ na agbalẽtata ƒe nu tsɛwo, nubablɛ ƒe fesre siwo le bɔbɔe, nutsyɔnu, agbalẽŋlɔnuwo kple dɔ bubu siwo hiã be woatrɔ ɖe nɔnɔmewo ŋu tsɔ wu be woasẽ xɔtuɖaŋu.

Nukae wozãna na 0.2 mm transparent PVC agbalẽ dzi nyawo ?

Wozãa 0.2 mm agbalẽ dzi nyawo zi geɖe na blister ƒe bablawo, aɖaka tsɛ siwo woate ŋu abla, nubablɛ siwo wota, fesrewo kple thermoformed components siwo ƒe kpekpeme le bɔbɔe.

Nukae wozãa 0.3 mm clear PVC agbalẽ dzi nyawo na?

0.3 mm agbalẽ dzi nyawo naa kpekpeɖeŋu geɖe wu 0.1 mm alo 0.2 mm nu eye zi geɖe la, wotiae na aɖaka siwo woate ŋu abla, asitsaƒewo ƒe nubablɛwo, agbalẽŋlɔnuwo ƒe nutsyɔnu, nukpɔkpɔwo kple nubablɛ siwo wowɔ.

Ðe 1 mm si me kɔ PVC agbalẽ dzi nyawo sesẽa?

PVC agbalẽ dzi nyawo si ƒe didime nye milimeta 1 la sesẽna ŋutɔ wu nusiwo wotsɔ blaa nu tsɛwo. Wowu sesẽme hã nɔ te ɖe panel ƒe didime, kpeɖeŋutɔ dometsotso, dzoxɔxɔ kple atikewɔwɔ dzi.

Nukae wozãna na 3 mm transparent PVC agbalẽ dzi nyawo ?

A 3 mm agbalẽ dzi nyawo sɔ na xɔtunu sesẽwo, ametakpɔnu xɔdzowo, dɔwɔnuwo ƒe nutsyɔnu, nukpɔkpɔwo, mamawo, nɔnɔmetatawo kple dɔwɔƒewo ƒe akpa siwo wowɔ.

Ðe woate ŋu awɔ dzoxɔxɔ ƒe nɔnɔme si me kɔ PVC agbalẽ dzi nyawo ?

Ɛ̃. Woateŋu awɔ grade siwo sɔ le vacuum me alo thermoformed woazu blisters, traywo dzi , nutsyɔnuwo kple nɔnɔme ƒe akpa siwo wotsɔ blaa nu. Wokafui be woado ewɔwɔ kpɔ.

Ðe woate ŋu ata PVC agbalẽ dzi nyawo si me kɔa?

Ɛ̃. Agbalẽtata-grade PVC ateŋu ado alɔ screen, UV kple offset tata le ink, anyigba kple curing ƒe sɔsɔ si woɖo kpe edzi vɔ megbe.

Ðe woate ŋu abla PVC agbalẽ dzi nyawo si me kɔ la ɖe aɖakawo mea?

Woate ŋu atso aɖaka tsɛ siwo woate ŋu abla la ƒe dzesiwo le ku me, axɔ dzesiwo eye woaƒo wo nu ƒu ɖe kakɛ siwo me kɔ me. Titrime, nuku ƒe mɔfiame, crease ƒe goglome kple folding radius kpɔa ŋusẽ ɖe whitening kple cracking dzi.

Ðe woate ŋu atso PVC agbalẽ dzi nyawo si me kɔ la ɖe eƒe lolome nua?

Ɛ̃. Woate ŋu aƒo nu tso didime siwo wowɔ ɖe ɖoɖo nu, agbalẽ dzi nyawo s siwo wotso kple slit rolls ŋu le woƒe titrime, mɔɖeɖe ɖe nu ŋu, dɔwɔnuwo kple nudɔdɔ ƒe agbɔsɔsɔ nu.

Ðe ametakpɔnu ƒe film li?

Woate ŋu ana ametakpɔnu film na nu tiatia aɖewo be woaɖe anyigba ƒe ʋuʋu dzi akpɔtɔ le ʋuɖoɖo, agbalẽtata, ewɔwɔ kple eƒoƒoƒu me.

Ðe nusi me kɔ PVC agbalẽ dzi nyawo tsi mate ŋu age ɖe eme oa?

PVC mexɔa tsi bɔbɔe o eye wònaa anyigba si dzi tsi mate ŋu age ɖo o. Esia menaa tsi mate ŋu age ɖe agba alo wo ƒoƒo ƒu vɔ megbe le eɖokui si o.

Ðe woate ŋu azã PVC agbalẽ dzi nyawo si me kɔ le gotaa?

Standard clear PVC nye esi woɖo zi geɖe na xɔme alo nuto siwo dzi wokpɔna. Gbedoxɔ me dɔwɔwɔ ateŋu abia be UV nali ke eye woado yame ƒe nɔnɔme, dzoxɔxɔ kple dɔwɔwɔ ƒe agbenɔƒe si wokpɔ mɔ na kpɔ.

Ðe PVC si me kɔ la sɔ na nuɖuɖu babla?

Aŋɔ si sɔ pɛpɛpɛ nɔ te ɖe aŋɔ si sɔ pɛpɛpɛ, nusiwo wotsɔ kpe ɖe eŋu, ewɔwɔ ƒe nɔnɔme, nuɖuɖu ƒomevi, kadodo ƒe nɔnɔmewo kple afisi woayi-asi ƒe sewo dzi. Ele be woagblɔ nuɖuɖu ƒe kadodo ƒe nudidiwo hafi abia nu.

Ðe recycled-content transparent PVC li?

Ðewohĩ atike siwo me wogbugbɔ zãe le la li na dɔwɔwɔ siwo sɔ. Ele be woazã kpɔɖeŋu si dzi woda asi ɖo atsɔ ada eme kɔ, amadede, mɔ̃ɖaŋununya ƒe nɔnɔmewo kple sedziwɔwɔ kpɔ.

Vovototo kae le ɣi si me kɔ kple esi ƒe amadede nye blɔ PVC dome ?

Yevu si me kɔ PVC ƒe nukpɔkpɔ ƒe dzedzeme medea akpa aɖeke dzi o wu, gake PVC si ƒe amadede nye blɔ la ƒe amadede nye blɔ vie si ate ŋu axe mɔ na amadede ɣi si le nukpɔkpɔ me. Ele be woada asi ɖe ŋutilã me kpɔɖeŋu aɖe dzi.

Ðe matte alo frosted transparent PVC li?

Ɛ̃. Woate ŋu aƒo nu tso mat, light-frosted kple heavy-frosted anyigba ŋu hena keklẽ si dzi ɖe kpɔtɔ, diffused visibility kple atsyɔ̃ɖoɖo ƒe dɔwɔwɔ.

Nukae nye MOQ na PVC agbalẽ dzi nyawo s siwo me kɔ?

MOQ si woɖo ɖi na atike sia nye 1000 kg. Amadede siwo wowɔ ɖe ɖoɖo nu, didime siwo mebɔ o, dzeside tɔxɛwo alo ametakpɔnu-film ƒe nudidiwo ate ŋu anye MOQ bubu.

Ðe PVC agbalẽ dzi nyawo kpɔɖeŋu siwo me kɔ la lia?

Ɛ̃. Woate ŋu ana kpɔɖeŋu siwo ƒe lolome seɖoƒe li na hena ŋkuléle ɖe nusiwo me kɔ, woƒe titrime, wo tata, wo babla, wo wɔwɔ kple wo wɔwɔ ŋu. Zi geɖe la, nuƒlelae xea agbatsɔtsɔ si woɖona ɖe amewo.

Nukae nye ɣeyiɣi si woatsɔ awɔe?

Ɣeyiɣi si wozãna tsɔ wɔa nuawoe nyea abe ŋkeke 10-14 ene le esi woɖo kpe nɔnɔme tɔxɛwo kple fexexe dzi vɔ megbe. Nusiwo wowɔ ɖe ɖoɖo nu ate ŋu abia ɣeyiɣi bubu.

Nyatakaka kawoe hiã hafi woate ŋu ayɔ nyayɔyɔ?

Na eƒe titrime, didime, agbɔsɔsɔme, amadede, nusi me kɔ, anyigba ƒe nuwuwu, dɔwɔwɔ ƒe mɔnu, nusiwo le eme ƒe didi, babla, teƒe si woayi kple sedziwɔwɔ ŋuti nuŋlɔɖi siwo hiã.

Na PVC ƒe Agbalẽ Nyayɔyɔ si me kɔ si wowɔ ɖe ɖoɖo nu