0,2mm 0,3mm Clear Pvc Plastiki sɛbɛn

0,2mm ani 0,3mm Clear Rigid PVC Plastiki sɛbɛn

HSQY bɛ 0,2mm ni 0,3mm PVC plastiki gɛlɛn jɛlen di , a bɛ kɛ roll ani cut-sheet cogo la, ka ɲɛsin blister pakew ma, kɛsu foli jɛlenw, pake sɛbɛnnenw, sɛbɛnnikɛlanw datugulanw, jiralan finɛtiriw, lakanani datugulanw ani fɛn sugandilenw minnu dilannen don ni funteni ye.

0,2mm sɛbɛn bɛ bɛn mikron 200 ma, ka sɔrɔ 0,3mm sɛbɛn bɛ bɛn mikron 300 ma. O jatebɔlan fila bɛ balansi danfaralenw di, minnu bɛ se ka sɛgɛsɛgɛli kɛ, ka gɛlɛya, ka foroko juguya, foli kɛcogo ani fɛnw baaracogo. HSQY bɛ se ka rollo bonya, sɛbɛnfura bonya, a sanfɛla fini, a jɛlen, a tintin, a dilanni, a kɔnɔkow lasegincogo, a kɔnɔna hakɛ ani a pakew kɛ ka kɛɲɛ ni a yɛrɛ sago ye.

0,2mm 0,3mm PVC sɛbɛn jɛlen Wideyo

PVC Plastiki sɛbɛn ja jɛlenw

Clear Rigid PVC Sheet ye mun ye?

PVC sɛbɛn gɛlɛn jɛlen ye polivinili kuloridi fɛn ye min ma plastiki walima a plastiki ka dɔgɔn, min dilannen don i n’a fɔ sɛbɛn walima kurukuru jɛlen. A bɛ jɛya, gɛlɛya, hakɛ dɛmɛni, sɛbɛnnikɛcogo ani thermoforming baarakɛcogo fara ɲɔgɔn kan pakew ni plastiki fɛn dilannenw na.

Jateminɛ finmanw i n’a fɔ milimɛtɛrɛ 0,2 ani milimɛtɛrɛ 0,3, olu bɛ ɲɛfɔ tuma caman na i n’a fɔ PVC filimu gɛlɛn, PVC sɛbɛnfura filimu walima PVC kuru jɛlen. Tɔgɔ ɲuman bɛ bɔ a dilabaga ni a kɛcogo la, nka a kɛcogo ka kan ka danfara don ni PVC rido filimu nɔgɔlen ye ani PVC plati belebeleba injiniyɛri ye.

0,2mm 0,3mm PVC sɛbɛn jɛlenw ka ɲɛfɔliw

0,2mm ni 0,3mm PVC jɛlen sɛbɛnfura

A janya min ka di, o ka kan ka dafa ni die yɛrɛ, mɔbili, sɛbɛnni kɛcogo, fɛn dilannen girinya ani a foroko hakɛw sɛgɛsɛgɛli ye. Sɛbɛn min ka bon, o tɛ fisaya a yɛrɛma ni fɛn caman tigɛli minɛnw dabɔra jatebɔlan nɔgɔman kama.

PVC sɛbɛn jɛlen girinya jatebɔcogo

Sɛbɛn girinya jateminɛlen bɛ se ka jate ni a janya, a yɔrɔ ani a fɛnw hakɛ ye. Sanni jatew kama, aw bɛ baara kɛ ni bɛnkan sɔrɔlen ye sanni ka PVC nafa caman kɛ.

PVC plastiki jɛlen ka fɛn kolomaw

PVC jɛlen 0,2mm ani 0,3mm kɛli

Thermoforming ani Vacuum-Forming ɲɛminɛni

PVC gɛlɛn bɛ kɛ ka caya ka ɲɛsin thermoforming ma, nka foroko finɛtiri ɲuman bɛ bɔ sɛbɛnfura dilanni na, a bonya la, a dilanni na, a ja hakɛ la, a sumaya siratigɛ la ani a masin teliya la. Sɛnɛfɛnw dilanni kɔrɔbɔliw ka kan ka ban sani komandiba ka kɛ.

Sɛbɛnni, Die Tigɛ ani Foli ɲɛminɛni

Transparence, Surface Finish ani Kulɛri suganditaw

PVC Npogotiginin ni Recycled Material Sugandili

Ɲɛ min dira, o bɛ npogotiginin 100% walima furakisɛ dɔ jira min kɔnɔ 30% bɛ sɔrɔ fɛn wɛrɛw la. Fɛn minnu bɛ segin ka kɛ fɛn wɛrɛw ye, olu bɛ se ka dɔ bɔ fɛnɲɛnamafagalan musakaw la, nka a bɛ se ka nɔ bila jɛya la, kulɛri, kasa, nɔ nɛrɛma, nɔ bilali fanga la, ka kɛ kelen ye ani ka sariya labatoli kɛ.

Dumuni, furakɛli, furakɛli walima dumunikɛlaw ka baarakɛcogo gɛlɛnw na, aw kana a miiri ko furakisɛ min bɛ segin ka kɛ fɛn wɛrɛ ye, o bɛ sɔn. Fɛn minnu bɛ se ka kɛ, olu danfara ka kan ka dafa ka kɛɲɛ ni taayɔrɔ-sɔgɔli sariyaw ye.

Dumuni, furakɛli ani furaw foroko wajibiyalenw

Jogoɲumanya kɔlɔsili ka ɲɛsin PVC sɛbɛn gɛlɛn jɛlen ma

PVC sɛbɛn PDF Téléchargements

Nin fɛɛrɛ sɛbɛn ninnu bɛ ɲɛ fɔlɔ la. Sɛbɛn minnu bɛ tablo gris, 20mm board walima offset-printing grades kan, olu tɛ se ka kɛ 0,2mm ani 0,3mm PVC jɛlen fɛn ye; sɛbɛn tɔgɔ, a hakɛ ani a seginnkanni sɛgɛsɛgɛ sani aw ka baara kɛ n’u ye walasa ka sɔnni kɛ.

PVC jɛlen sɛbɛn kunnafonisɛbɛn.pdf

PVC rigide sheet ka tasuma.pdf

PVC gris pankurun sɛgɛsɛgɛli rapɔɔri.pdf

PVC jɛlen filimu kunnafonisɛbɛn.pdf

PVC sɛbɛn sɛgɛsɛgɛli rapɔɔri.pdf

20mm gris pankurun sɛgɛsɛgɛli rapɔɔri.pdf

PVC sɛbɛn min bɛ kɛ ka offset-test report.pdf

Foroko ni fɛnw lasecogo suganditaw

Sɛbɛnw (certifications) minnu bɛ sɔrɔ

Seereyaw ka kan ka sɛgɛsɛgɛ ka kɛɲɛ ni a dilanni yɔrɔ tigitigi ye, a furakɛcogo, a janya ani a kɛcogo laɲininen. Sosiyete ka seere caman tɛ dumuniko, furakɛli, furakɛli walima tasuma sariya labatoli sigi sen kan a yɛrɛma.

Duniya bɛɛ ka ɲɛjiraliw

Kunnafoni minnu ka kan ka sɔrɔ walasa ka Quotation Tiɲɛnen sɔrɔ

1. A kɛcogo: Aw bɛ kurukuruw foroko fɔ, ka kɛsu da, ka kartɔn finɛtiri, sɛbɛnni, sɛbɛnnikɛlan, thermoforming walima baara wɛrɛ.

2. A bonya : Aw bɛ 0,2mm, 0,3mm walima jateminɛkɛlan wɛrɛ ni muɲuli wajibiyalen dafa.

3. Format: State master roll, slit roll, standard sheet walima sɛbɛn tigɛlen min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

4. Hakɛw: Aw bɛ rollo bonya, sɛbɛnfura bonya, a kɔnɔna cɛmancɛ, rollo girinya walima rollo kɛnɛma cɛmancɛ di.

5. Ɲɛnayeli wajibiyalenw : Aw bɛ ɲɛnamini jɛlen, bulu, sisi, kɛnɛya, kɛnɛya ani ɲɛnayeli nafama minnu bɛ se ka sɔn, olu fɔ.

6. Surface: Aw bɛ a sɛgɛsɛgɛ ko a ɲɛ jɛlen don, a ɲɛ ye bulama ye, a ɲɛ ma ɲɛ, a bɛ kɛ ni nɛnɛ ye, a furakɛra walima a bɛ se ka sɛbɛn.

7. Fɛn min bɛ kɛ: PVC npogotiginin walima kɛmɛsarada la min bɛ se ka segin ka kɛ fɛn wɛrɛ ye, o fɔ.

8. Baarakɛcogo: Aw bɛ sɛbɛnni, die tigɛ, foli, sirili, foroko ani masin kunnafoniw di.

9. Labatoli: Dumuni, furakɛli, furakɛli, RoHS, REACH, tasuma walima feerekɛlaw ka ɲininiw fɔ.

10. Jago kunnafoniw: Aw bɛ misali hakɛ, san hakɛ, pakew, taayɔrɔ kurunbonkarila ani fɛnw lase waati di.

Ɲininkali minnu bɛ kɛ tuma caman na

PVC sɛbɛn jɛlen 0,2mm ye mun ye mikron na?

Ni a janya ye milimɛtɛrɛ 0,2 ye, o bɛ bɛn mikron 200 ma walima 200μm ma.

PVC sɛbɛn jɛlen 0,3mm ye mun ye mikron na?

Ni a janya ye milimɛtɛrɛ 0,3 ye, o bɛ bɛn mikron 300 ma walima 300μm ma.

PVC jɛlen 0,2mm ni 0,3mm bɛ kɛ mun na?

Baara minnu bɛ kɛ tuma caman na, olu ye blister pakew ye, kɛsu dabɔlenw ye minnu bɛ ye, kartɔn finɛtiriw, sɛbɛnni, sirili datugulanw, jirali kartiw ani fɛnw don minnu bɛ kɛ ni funteni ye.

Juman ka fisa ni kɛsu foli ye, 0,2mm walima 0,3mm PVC?

0,2mm ka nɔgɔn ani a bɛ se ka wuli, ka sɔrɔ 0,3mm bɛ gɛlɛya ni flakɛliba di. Jateminɛ kɛcogo ɲuman bɛ bɔ kɛsu bonya la, fɛn dilannen girinya ani a kurulenw dilanni na.

Yala PVC sɛbɛn jɛlen bɛ se ka kɛ thermoformé ye wa?

Awɔ. PVC suguya gɛlɛn minnu bɛnnen don, olu bɛ se ka kɛ ni vacuum ye walima ka kɛ ni thermoformé ye, nka a mɔli, a funteni cogoya, a ja hakɛ ani a sɛbɛncogo ka kan ka tiɲɛ.

Yala PVC sɛbɛn jɛlen bɛ se ka sɛbɛn wa?

Awɔ. Offset, screen, UV ani sɛbɛnnikɛlan wɛrɛw bɛ se ka kɛ tintin nɔrɔli, a kɛnɛyali ani a sanfɛla bɛnkan kɔrɔbɔli kɔfɛ.

Yala PVC sɛbɛn bɛ se ka da nɛnɛ na wa?

Kalanso sugandilenw bɛ se ka jate ani ka foli kɛ, nka foli nɔgɔlenw bɛ se ka fin walima ka kari ni kurukuru jateminɛcogo walima a kɛcogo ma bɛn.

Surface fini jumɛnw bɛ sɔrɔ?

Sugandili minnu ka teli ka kɛ, olu ye yɔrɔw ye minnu ɲɛ ye bulama ye, minnu ɲɛ ye bulama ye, minnu ɲɛ ye nɛnɛ ye, minnu ɲɛw ye ɲɛgɛn ye ani minnu ɲɛw ye ɲɛgɛnw ye minnu tɛ ye.

Yala HSQY bɛ se ka rollo ni sɛbɛn tigɛlenw di wa?

Awɔ. Baro bɛ se ka kɛ master rolls, narrow slit rolls, standard sheets ani customized cut sheets kan.

Sɛbɛn hakɛ jumɛnw bɛ sɔrɔ?

A4, 500 × 765mm, 700 × 1000mm, 915 × 1220mm, 1220 × 2440mm ani hakɛ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka jateminɛ.

Yala PVC sɛbɛn dilannen don ni npogotiginin ye wa?

PVC npogotiginin ni npogotiginin/min bɛ segin ka kɛ fɛn wɛrɛw ye minnu dabɔra, olu bɛ sɛbɛn. A kɛcogo min bɛ se ka kɛ, o ka kan ka dafa ka kɛɲɛ ni a kɛcogo laɲininen ye.

Yala PVC sɛbɛn jɛlen bɛnnen don dumuniw foroko ma wa?

Kalanso dɔrɔn de ka kan ka kɛ ni sɛbɛnw ye minnu bɛ a furakɛcogo tigitigi ni a magali cogoyaw kan.

Yala standard clear PVC sheet furakɛli grade ye wa?

Furakɛcogo si man kan ka jate. Furakɛcogo blister film bɛ kalandenw ka kalasi kɔlɔsili kɛrɛnkɛrɛnnenw de wajibiya, sɛbɛnw ani kiliyanw ka setigiya.

Yala PVC sɛbɛn jɛlen bɛ tasuma bali wa?

PVC tasuma kɛcogo bɛ bɔ a dilanni ni a bonya la. Baara kɛ ni sɛgɛsɛgɛli rapɔɔri ye min bɛ sen na sisan walasa ka kalasi tigitigi sɔrɔ sanni i k’i jigi da fɛn caman fɔcogo kan.

Yala ne bɛ se ka misali dɔ sɔrɔ sani ne ka komandi kɛ wa?

A4 misaliw ni kɔrɔbɔli sɛbɛnw bɛ se ka di ka kɛɲɛ ni u sɔrɔli, u ɲɛfɔcogo ani u doni sariyaw ye.

MOQ ye mun ye?

Farikolo tabali bɛ kilo 500 jira, ka sɔrɔ sisan fɛn dilannenw kuncɛlen bɛ kilo 1000 jira. HSQY ka kan ka MOQ laban kelen dafa sani ɲɛ ka bɔ.

PVC sɛbɛnfura jɛlenw ka kan ka mara cogo di?

Aw bɛ kurukuruw mara ka jɔ walima i n’a fɔ a ɲɛfɔlen don cogo min na, so kɔnɔ, yɔrɔ min ka jan funteni na, tile yeelen tilennen, nɔgɔ, buguri ani u dalajɛli degun kojugu.

Ne bɛ se ka quotation tigitigi sɔrɔ cogo di?

Aw bɛ a kɛcogo, a bonya, a bonya, a cogoya, a sanfɛla, a kɛcogo, a baaracogo, a labatoli, a hakɛ ani a taayɔrɔ ci.

Mun na i bɛ HSQY sugandi ka kɛ i ka PVC sɛbɛn jɛlen dilanbaga ye?

HSQY Plastic Group bɛ PVC sɛbɛnw ni sɛbɛnfura jɛlenw dilan walasa ka pakew dilanni, sɛbɛnni, thermoforming, sɛbɛnnikɛlanw ani izini fɛn caman tigɛli. A janya minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, u bonya, u tigɛlenw hakɛ, u kulɛriw, u yɔrɔw, u furakɛcogo ani u pake minnu bɛ taa jamana wɛrɛw la, olu bɛ se ka jateminɛ feerekɛlaw ni u dilannikɛlaw fɛ.

Walasa ka kunnafoni dɔ sɔrɔ min bɛ se ka da a kan, aw bɛ fɛnw misali dɔ ci min bɛ yen, pake dafalen, ja ani masin kunnafoniw. O kɔfɛ, HSQY bɛ se ka jateminɛ kɛ jateminɛ, jɛya, gɛlɛya, sɛbɛnni, foli, thermoforming, kɔnɔkow lasegincogo ani sariya labatoli ɲɔgɔn fɛ.