0.1mm 0.2mm 0.3mm 1mm Transparent Pvc Krataa 3Mm

Dɛn ne Transparent Rigid PVC Krataa a Wɔde Di Dwuma ?

PVC krataa so nsɛm a ɛda adi pefee yɛ polyvinyl chloride ade a emu da hɔ na ɛyɛ den a wɔde yɛ thermoforming, tintim, nnaka a wɔbobɔw, blister packaging, ahobammɔ nkataso, nkyerɛwee, aguadidan mu nneɛma a wɔde kyerɛ ne plastic afã horow a wɔayɛ.

HSQY de PVC krataa so nsɛm s a ɛyɛ den a ɛda adi pefee ma wɔ ne kɛse a wɔtaa bisa a ɛyɛ 0.1 mm, 0.2 mm, 0.3 mm, 1 mm ne 3 mm mu. Nneɛma a wɔde yɛ krataafa yi a wɔahyɛ da ayɛ no yɛ 0.1 mm kosi 3 mm, a amanne kwan so krataa so nsɛm nsusuwii, kɔla ne nea wɔde awie no wɔ hɔ sɛnea nneɛma a wɔyɛ no betumi ayɛ yiye.

Wɔtaa paw nneɛma a ɛyɛ tratraa 0.1 mm kosi 0.3 mm PVC ma tintim, mfɛnsere a wɔde kyekyere nneɛma, nnaka a wɔbobɔw a emu yɛ hare, blister pack ne nneɛma a ɛyɛ tratraa a wɔde thermoformed ayɛ. Thicker 1 mm ne 3 mm krataa so nsɛm s ma rigidity kɛse ma ahobammɔ panels, displays, mfiri kataso, templates ne fabricated afã horow.

Nneɛma a wobetumi apaw a ɛwɔ hɔ no betumi ayɛ ɔbaabun PVC anaasɛ nnuru a wɔde yɛ nnuru a nneɛma a wɔasan de adi dwuma wom. Virgin-grade PVC yɛ nea wɔtaa pɛ bere a ɛho hia sɛ ɛda adi pefee, kɔla a ɛkɔ so daa, forming adwumayɛ a wɔahyɛ so anaasɛ application-specific compliance.

Ɛsɛ sɛ adetɔfoɔ de ne kɛseɛ a wɔhwehwɛ, ne kɛseɛ, nea ɛda adi pefee, ne soro awie, ɔkwan a wɔfa so yɛ adwuma, dodoɔ ne botaeɛ-gua a wɔhwehwɛ ma sɛdeɛ ɛbɛyɛ a HSQY bɛtumi akamfo PVC grade a ɛfata akyerɛ.

Bisa Transparent PVC Krataa a Wɔde Di Dwuma Boɔ a Wɔbɔ    Bisa PVC Krataa a Wɔde Di Dwuma Nhwɛsode

Transparent PVC Krataa a Wɔde Di Dwuma Mfonini ahorow

Transparent PVC Krataa a Wɔde Di Dwuma Data Nkrataa

Hwɛ mfiridwuma ho nsɛm a ɛwɔ hɔ ne sɔhwɛ ho nkrataa a ɛwɔ ase ha no mu. Ɛsɛ sɛ adetɔfo si so dua sɛ krataa biara fa PVC nhyehyɛe, ne kɛse, kɔla ne ne yɛ ho nkyerɛkyerɛmu pɔtee a wɔretɔ no ho.

       Twe Transparent PVC Krataa a Wɔde Di Dwuma Data Krataa no                    Twe Transparent PVC Krataa a Wɔde Di Dwuma Sɔhwɛ Amanneɛbɔ        

Transparent PVC Krataa a Wɔde Di Dwuma Nsɛm a Wɔakyerɛkyerɛ Mu

Ɛsɛ sɛ wɔfa nhwɛsoɔ a wɔapene so, mfiridwuma ho nkyerɛkyerɛmu anaa adetɔ apam so si so dua sɛ awieɛ thickness tolerance, wideth tolerance, transparency, color, surface finish ne processing performance.

Sɛnea Wɔpaw 0.1 mm, 0.2 mm, 0.3 mm, 1 mm anaa 3 mm PVC Krataa a Wɔde Di Dwuma

Thickness ka flexibility, stiffness, forming bun, folding suban, impact adwumayɛ ne finished-product mu duru. Table a edidi so yi de akwankyerɛ a ɛfa paw a wɔpaw ho wɔ ɔkwan a ɛkɔ akyiri so ma.

Saa nyansahyɛ ahorow yi yɛ nea ɛfa biribiara ho. Krataa nsusuwii, mmoa ntam kwan, forming depth, product weight, tooling ne service temperature betumi asesa thickness a wɔhwehwɛ.

Thin PVC Sini vs. Ɛyɛ den a ɛyɛ den PVC Krataa a Wɔde Di Dwuma

Nneɛma Titiriw a Ɛwɔ Transparent PVC Krataa a Wɔde Di Dwuma mu.

Nneɛma a Wotumi Hu a Ɛkorɔn

Clear PVC ma kwan ma nneɛma, mfonini ne nneɛma a ɛwɔ krataa so nsɛm akyi no kɔ so da adi. Eyi ma ɛfata ma nneɛma a wɔde kyekyere nneɛma, mfɛnsere a wɔde kyerɛ nneɛma, nkataso a ɛbɔ ho ban ne aguadidan mu nkyerɛkyerɛmu.

Rigidity a mfaso wɔ so ne Dimensional Stability

Rigid PVC kura ne nsusuwii mu wɔ tebea horow a ɛfata a wɔde di dwuma mu na ɛma mmoa a mfaso wɔ so ma nneɛma a wɔabobɔw, wɔayɛ ne nea wɔayɛ. Rigidity ankasa gyina ne kɛse ne sɛnea wɔyɛ so denneennen.

Thermoforming Tumi a Wɔde Yɛ Nneɛma

Wobetumi ama grades a ɛfata ayɛ hyew na wɔayɛ no blister cavities, tray ahorow a wɔde di dwuma , covers ne nneɛma afoforo a ɛwɔ afã abiɛsa. Ɛsɛ sɛ wɔgye ɔhyew, nkukuo nhyehyɛɛ ne onwini tebea tom ansa na wɔayɛ.

Ntintim ne Nneɛma a Wɔde Siesie

PVC surfaces a wɔasiesie no yie no tumi boa screen printing, UV printing, offset printing, foil stamping, labeling ne decorative finishing. Ɛsɛ sɛ wɔsɔ sɛnea ink no hyia hwɛ.

Nsuo a Ɛko Tia

PVC ntumi nnye nsuo ntɛm na ɛtumi ma nsuo a ɛtumi gyina hɔ ma nneɛma a wɔde kyekyere, nkatasoɔ ne mfiridwuma mu nneɛma. Ɛnsɛ sɛ wɔde di dwuma ara kwa sɛ ade a wɔde siw nsu ano a edi mũ.

Nnuru a Ɛko Tia

PVC gyina nnuru pii a wɔtaa hyia ano, nanso sɛnea ɛne ne ho hyia no gu ahorow sɛnea nnuru no su, ne dodow, ɔhyew ne bere tenten a wɔde di dwuma no te. Dwumadi ahorow a ɛho hia hwehwɛ sɛ wɔsɔ hwɛ.

Nneɛma pii a Ɛwɔ Afã ne Kɔla a Wobɛpaw

Ebia nea wobetumi apaw ne fitaa a emu da hɔ, bruu-tinted transparent, kɔla a ɛyɛ mmerɛw, glossy, matte, light-frosted ne heavy-frosted finishes.

Virgin ne Recycled-Content a Wɔpaw

Ebia nnuru a wɔde yɛ nneɛma a wɔasan de adi dwuma wɔ hɔ a wɔde bɛyɛ mfiridwuma mu nneɛma a ɛfata. Ɛsɛ sɛ wɔsɔ nea emu da hɔ, kɔla a ɛkɔ so pɛpɛɛpɛ, hua, mfiri adwumayɛ ne mmara a ɛfata hwɛ wɔ ɔkwan soronko so fi ɔbaabun-grade PVC .

Thermoforming ne Vacuum-Forming Akwankyerɛ

Thermoforming adwumayɛ gyina PVC formulation, thickness, krataa so nsɛm akwankyerɛ, ɔhyew uniformity, nkuku nhyehyɛe, forming bun ne onwini kyinhyia.

• Fa krataa so nsɛm no hyew pɛpɛɛpɛ na ama mpɔtam hɔ thinning, stress ne optical distortion so atew.

• Fa PVC grade no toto forming bun ne cavity geometry ho.

• Di nkuku no hyew ne onwini so na ama ɛkyinkyim so atew bere a wɔayɛ no awie no.

• Hwɛ ɔfasu-kɛseɛ nkyekyɛmu wɔ deep-draw components.

• Sɔ ntwitwiridii, nsɔano ne stacking hwɛ bere a ɔfã no ayɛ nwini koraa akyi.

• Si so dua sɛ ebia ade a wɔawie no hwehwɛ sɛ wodi aduan, nnuru anaa aduruyɛ so.

Wɔkamfo kyerɛ sɛ wɔmfa afiri a ɛma ɔhyew ne nkuku ankasa nsɔ nneɛma a wɔyɛ no hwɛ ansa na wɔapene ahyɛde kɛse bi so.

Ntintim, Folding ne Fabrication

Screen, UV ne Offset Nkyerɛwee

Nea efi tintim mu ba no gyina ahoɔden a ɛwɔ soro, ink nnuru, tebea a ɛma ɛyɛ yare ne nea wɔde wie so. Ɛsɛ sɛ adetɔfo sɔ adhesion, kɔla hwɛbea, scratch resistance ne fold-line durability hwɛ.

Die-Cutting ne Punching a Wɔbɔ

Thin PVC betumi adie atwitwa akɔ packaging mfɛnsere, carton profiles, tags ne inserts. Nhyɛso a wɔde twa, die clearance, krataa so nsɛm ɔhyew ne adwinnade tebea nya anoano su so nkɛntɛnso.

Nkonimdi ne Folding

Wobetumi de nkontabuo ahyɛ PVC abasobɔdeɛ a ɛyɛ tratraa a ɛfata na wɔabobɔw ayɛ no nnaka ne nsateaa a ɛda adi pefee. Crease bun a ɛnteɛ, folding radius anaa material direction betumi ama ayɛ fitaa anaasɛ mpaapaemu.

Bending ne Nneɛma a Wɔyɛ

Wobetumi atwitwa 1 mm ne 3 mm krataa so nsɛm s a ɛyɛ den, atutu, afa kwan so, abɔ mu na wɔayɛ no ayɛ no nnua ne nkataso. Ɛsɛ sɛ wɔhwɛ ɔhyew-bending tebea horow so de siw ahurututu, kɔla a ɛsakra anaasɛ ɛsakra no ano.

Welding ne Adhesive Bonding a Wɔde Yɛ Nneɛma

Wobetumi de akwan a ɛfata ayɛ welded anaasɛ abɔ PVC afã horow a ɛne no hyia. Ɛsɛ sɛ wɔsɔ sɛnea adhesive hyia, sɛnea nkwaa te, sɛnea ɛsa ne ahoɔden a ɛtra hɔ kyɛ hwɛ ansa na wɔayɛ no aguadi.

Nnwuma a ɛfa Transparent PVC Krataa a Wɔde Di Dwuma

Blister ne Thermoformed Nneɛma a Wɔde Gu Nneɛma Mu

Wobetumi ayɛ PVC krataa so nsɛm a ɛyɛ tratraa no ayɛ no blister packs, clamshells, tray ahorow a wɔde di dwuma , nkataso ne adetɔnbea a ɛbɔ ho ban a wɔde kyekyere nneɛma a wɔde di dwuma, ɛlɛtrɔnik nneɛma, agode ne nneɛma afoforo.

Nnaka a Wɔbobɔw a Ɛda Hɔ

Wobetumi atintim PVC a emu da hɔ, atwa no awu, abɔ mu na wɔabobɔw ayɛ no nnaka a wɔde yɛ ahosiesie, akyɛde nnaka, ɛlɛtrɔnik nneɛma a wɔde kyekyere nneɛma, nnaka a wɔde kyerɛw nneɛma ne nneɛma a wɔde hyɛ nneɛma ho nkuran.

Ntintim ne Nsɛnkyerɛnne a Wɔde Yɛ Adwuma

Wobetumi de printing-grade PVC adi dwuma ama mfonini panels, promotional signs, menu covers, printed overlays, display components ne point-of-purchase nneɛma.

Nkyerɛwee ne Nkyekyeremu

Nnwuma no bi ne nhoma a wɔde kyerɛw nsɛm, nkataso a wɔde kyekyere nneɛma, folda, nkrataa mfɛnsere, mpaapaemu, kaad kurafo ne nneɛma afoforo a wɔde kyerɛw nsɛm a ɛda adi pefee.

Nkataso a Ɛbɔ Wɔn Ho Ban ne Awɛmfo

Wobetumi ayɛ krataa so nsɛm s a ɛyɛ den no ayɛ no nnwinnade a wɔde kata so, ahobammɔ kyɛm, mfiri awɛmfo, mfutuma kataso ne mpaapaemu a ɛda adi pefee a wɔde bedi dwuma wɔ dan mu a wɔahyɛ so.

Nneɛma a Wɔde Kyerɛkyerɛ ne Nneɛma a Wɔde Asiesie Nneɛma

Wobetumi de PVC a ɛda adi na ɛwɔ kɔla adi dwuma ama nneɛma a wɔde kyerɛ, adetɔnbea panels, ɔyɛkyerɛ afã horow, nneɛma a wɔde siesie nneɛma ne aniwa-aguadi nhyehyɛe.

Mfiridwuma mu Nneɛma a Wɔyɛ

Mfiridwuma mu dwumadie bi ne templates, separator krataa so nsɛm s, ahobammɔ liners, formed covers, inspection windows ne custom-fabricated plastic components.

Hwehwɛ pii mu PVC krataa so nsɛm nneɛma a wɔde tintim, wɔde kyekyere, hyehyɛ ne mfiridwuma mu nneɛma a wɔyɛ.

Nneɛma a ɛda adi pefee PVC ne PET , PETG ne Polycarbonate

Custom Transparent PVC Krataa a Wɔde Di Dwuma Nneɛma a Wɔpaw

• Wɔada no adi sɛ ne kɛse yɛ mm 0.1, mm 0.2, mm 0.3, mm 1 ne mm 3.

• Standard krataa so nsɛm s, amanne-twitwa krataa so nsɛm s, nhoma mmobɔwee ne nhoma mmobɔwee a wɔapaapae mu.

• Kɔla fitaa a emu da hɔ, bruu-tinted, kɔla a ɛda adi na ɛnyɛ nea ɛda adi.

• Glossy, matte, light-frosted ne heavy-frosted surfaces.

• Nnuru a wɔde tintim nhoma, adaka a wɔbobɔw ne nea wɔde yɛ thermoforming.

• Virgin anaa recycled-content options a ɛhwɛ sɛnea application no fata so.

• Protective film ma scratch-sensitive dwumadie ne akwantuo.

• Amanneɛbɔ twa, slitting, packaging ne pallet ahwehwɛde.

• Nhwɛsoɔ ma transparency, tintim, folding, forming ne fabrication sɔhwɛ.

Nsɛm a Ɛhia ma PVC Krataa a Wɔde Di Dwuma Quote a ɛda adi pefee

• Wɔhwehwɛ sɛ wotumi gyina ne kɛse ne ne kɛse ano.

• Krataa no nsusuwii, nhoma mmobɔwee trɛw, nhoma mmobɔwee tenten anaa nea wɔatwa-afã kɛse.

• Kɔla fitaa a emu da hɔ, bruu-tinted anaa amanne kwan so kɔla.

• Glossy, matte anaasɛ frosted soro.

• Ɛho hia sɛ ɛyɛ nea ɛda adi pefee, haze anaasɛ optical appearance.

• Ɔkwan a wɔfa so tintim, bobɔ, die-cutting, thermoforming anaa fabrication kwan.

• Virgin-material anaa recycled-content ahwehwɛde.

• Protective-film ne nneɛma a wɔde kyekyere nneɛma ho ahwehwɛde.

• Sɔhwɛ dodow, dodow a ɛdɔɔso ne afe afe ahwehwɛde.

• Ɔman a wɔrekɔ, hyɛn gyinabea, aguadi bere ne da a wɔhwehwɛ sɛ wɔde bɛkɔ.

• Aduan a wɔde di nkitaho, nnuruyɛ, aduruyɛ, RoHS, REACH anaa ahwehwɛde afoforo a ɛfa nea wodi so ho.

Send Wo PVC Krataa a Wɔde Di Dwuma Ahwehwɛdeɛ

Nneɛma a Ɛyɛ Pa ne Nea Wodi So Ho Nsusuwii

Nwoma a ɛwɔ hɔ no betumi ayɛ sɔhwɛ amanneɛbɔ a ɛfa RoHS ho ne ISO su pa anaa nneɛma a atwa yɛn ho ahyia-hwɛ ho nkrataa. Ɛsɛ sɛ adetɔfo si so dua sɛ krataa no fa PVC nhyehyɛe ne ahyɛde ho nkyerɛkyerɛmu pɔtee no ho.

ISO 9001 ne ISO 14001 fa dwumadie nhyehyɛeɛ ho na ɛnsɛ sɛ wɔde ma sɛ adansedie tẽẽ sɛ PVC krataa so nsɛm biara fata ma dwumadie pɔtee bi a wɔahyɛ ho mmara.

Ɛnsɛ sɛ wɔfa no sɛ standard industrial PVC krataa so nsɛm di aduan-nkitahodi, nnuru, aduruyɛ anaa agode ho ahwehwɛde ahorow ho dwuma tẽẽ. Ɛsɛ sɛ wɔka sɛnea wɔpɛ sɛ wɔde di dwuma, nkitahodi tebea ne baabi a wɔrekɔ-gua ho mmara ansa na wɔakra.

Ebia recycled-content PVC remma pefeeyɛ, kɔla a ɛyɛ pɛpɛɛpɛ anaa mmara kwan so nsɛm a ɛte sɛ ɔbaabun PVC . Ɛsɛ sɛ wɔde hwɛ sɛnea wɔde di dwuma ankasa no.

Abɔnten a Wɔde Di Dwuma ne Ɔsom Ho Ɔhyew

Standard clear PVC krataa so nsɛm no, wɔtaa paw ma dan mu anaa dwumadie a wɔahyɛ so. Owia hann a ɛkɔ so bere tenten no betumi ama ne kɔla asesa, asakra wɔ soro anaasɛ mfiri no ayɛ adwuma ahwere gye sɛ wɔakyerɛ abɔnten so grade a UV a ɛma ɛyɛ den.

Nsuo a ɛko tia nko ara mma gyinapɛn PVC krataa so nsɛm mfata sɛ wɔde bedi dwuma wɔ abɔnten daa. Ɛsɛ sɛ wɔhwɛ UV a ɛda adi, mframa adesoa, ɔhyew kyinhyia, ɔkwan a wɔfa so de si so ne ɔsom nkwa nna a wɔhwehwɛ.

Ɔhyew a wobetumi de adi dwuma no gyina PVC nhyehyɛe, ne kɛse, mfiri adesoa ne bere tenten a wɔde da no adi so. Nnwuma a ɛho hia hwehwɛ sɛ wɔyɛ mfiridwuma ho nsɛm a ɛfa grade pɔtee bi ho ne tebea ankasa ho sɔhwɛ.

Nhwɛsode ne Nneɛma Pa a Wɔkamfo Kyerɛ

• Thickness, ne tɛtrɛtɛ, ne tenten ne dimensional tolerance.

• Transparency, haze, kɔla tone ne efĩ a wotumi hu.

• Glossy, matte anaa frosted soro a ɛyɛ pɛpɛɛpɛ.

• Scratch tebea ne ahobammɔ-sini a ɛne ne ho hyia.

• Printing adhesion, ayaresa ne abrasion a ɛko tia.

• Die-cutting ne anoano su.

• Folding, crease fitaa ne mpaapaemu suban.

• Thermoforming ɔhyew, twetwe bun ne ɔfasu-thickness kyekyɛ.

• Bending, drilling, routing, bonding anaa welding adwumayɛ.

• Nnuru, abɔnten ne ɔhyew adwumayɛ wɔ baabi a ɛfata.

• Amanneɛbɔ a wɔhwehwɛ sɛ wɔde di mmara so ma nkyerɛkyerɛmu pɔtee no.

Nneɛma a Wɔde Bɛma ne Nea Wɔde Kɔma

Nhwɛsoɔ a wɔde kyekyere nneɛma: A4 krataa so nsɛm s anaa nhwɛsoɔ a ne kɛseɛ sua a wɔde ahyɛ nkotokuo anaa nnaka a ɛbɔ ho ban mu.

Nkratafa a wɔde kyekyere nneɛma: Bɛyɛ kilogram 30 wɔ ade a wɔde kyekyere nneɛma biara mu, anaasɛ wɔayɛ no sɛnea ne kɛse ne sɛnea wɔde di dwuma ahwehwɛde ahorow te.

Fam ahobammɔ: Wobetumi de ahobammɔ film, PE wrapping, kraft krataa ne interlayer nneɛma adi dwuma de atew nsensanee so.

Pallet a wɔde kyekyere nneɛma: Bɛyɛ 500-2000 kg wɔ plywood pallet biara mu, egyina krataa so nsɛm kɛse ne nneɛma a wɔhwehwɛ so.

Nneɛma a wɔde gu ade mu: Bɛyɛ tɔn 20, a ɛgyina nneɛma a wɔde kyekyere nneɛma, ne nsusuwii ne nea wɔde gu mu no mu duru anohyeto so.

Nneɛma a wɔde bɛma: EXW, FOB, CNF ne aguadi ho nsɛm afoforo a wɔapene so.

Bere a wɔtaa yɛ: Bɛyɛ nnafua 10-14 akyi a wɔahyɛ nkyerɛkyerɛmu ne sikatua no so dua.

Bere a wɔde yɛ nneɛma no nka amanaman ntam nneɛma a wɔde mena ho. Kɔla ahorow a wɔahyɛ da ayɛ, ne kɛse a ɛyɛ soronko, sini a ɛbɔ ho ban ne ahwehwɛde titiriw a ɛfa nea wodi so no betumi atrɛw bere a wɔde di dwuma no mu.

Transparent PVC Krataa a Wɔde Di Dwuma Nneɛma a Wɔyɛ

Adansedi ne Nwoma a Ɛyɛ Paara

HSQY betumi de nkrataa a ɛwɔ hɔ a ɛfa su-hwɛ, nneɛma a atwa yɛn ho ahyia-hwɛ ne nneɛma a wɔde sɔ hwɛ ho ama de asi so dua. Ɛsɛ sɛ wɔsan hwɛ amanneɛbɔ ahorow a wɔhwehwɛ no mu de toto abasobɔde pɔtee a wɔahyɛ no ho.

HSQY Wiase Nyinaa Nneɛma a Wɔde Kyerɛkyerɛ

Dɛn nti na Paw HSQY sɛ Wo Transparent PVC Krataa a Wɔde Di Dwuma Supplier?

• Transparent rigid PVC krataa so nsɛm s fi 0.1 mm kosi 3 mm.

• Wɔde 0.1 mm, 0.2 mm, 0.3 mm, 1 mm ne 3 mm a wɔpaw no adi.

• Nkratafa, asinasin a wɔatwa no sɛnea wɔpɛ, nhoma mmobɔwee ne nhoma mmobɔwee a wɔapaapae mu.

• Ntintim, folding-box ne thermoforming grades.

• Transparent, tinted, kɔla, glossy, matte ne frosted options.

• Virgin ne recycled-content formulations ma nnwuma a ɛfata.

• Sini a ɛbɔ ho ban ne nneɛma a wɔde kɔ amannɔne a wɔayɛ no sɛnea wɔpɛ.

• Nhwɛsoɔ a wɔde yɛ tintim, nhyehyɛɛ ne fabrication sɔhwɛ.

• Bulk production mmoa ma converters, distributors ne OEM nnwuma.

Ansa na wɔbɛyɛ nneɛma pii no, ɛsɛ sɛ adetɔfo de wɔn ink ankasa, nnwinnade, thermoforming mold, crease design, adhesive ne fabrication equipment sɔ PVC krataa so nsɛm a wɔapaw no hwɛ.

Di HSQY nkitaho na woanya Nhwɛsode ne Bo

Nsɛmmisa a Wɔtaa Bisa Fa Transparent PVC Krataa a Wɔde Di Dwuma Ho.

Dɛn ne rigid a ɛda adi pefee PVC krataa so nsɛm ?

Ɛyɛ ade a emu da hɔ, ɛnyɛ plastic anaasɛ ɛnyɛ plasticizer PVC krataa so nsɛm a wɔde tintim, thermoforming, folding boxes, packaging, displays, covers ne fabricated plastic components.

Nneɛma a ɛyɛ den bɛn na ɛwɔ hɔ?

Nneɛma a wɔde yɛ nneɛma a wɔahyɛ da ayɛ wɔ kratafa yi so yɛ mm 0.1 kosi mm 3, a nea wɔtaa bisa sɛ ɛyɛ mm 0.1, mm 0.2, mm 0.3, mm 1 ne mm 3 ka ho.

Dɛn na wɔde 0.1 mm transparent PVC krataa so nsɛm di dwuma ma?

0.1 mm krataa so nsɛm fata ma nneɛma a wɔde tintim nhoma a ɛyɛ tratraa, mfɛnsere a wɔde kyekyere nneɛma a emu yɛ hare, nneɛma a wɔde kata so, nneɛma a wɔde kyerɛw nsɛm ne nneɛma afoforo a ɛhwehwɛ sɛ wɔyɛ nsakrae sen sɛ ɛbɛyɛ nea ɛyɛ den wɔ ɔdan no mu.

Dɛn na wɔde 0.2 mm transparent PVC krataa so nsɛm di dwuma ma?

Wɔtaa de 0.2 mm krataa so nsɛm yɛ blister packaging, nnaka a wɔbobɔw a ɛyɛ tratraa, nneɛma a wɔatintim, mfɛnsere ne thermoformed components a emu yɛ hare.

Dɛn na wɔde 0.3 mm clear PVC krataa so nsɛm di dwuma ma?

0.3 mm krataa so nsɛm ma mmoa pii sen 0.1 mm anaa 0.2 mm ade na wɔtaa paw ma nnaka a wɔbobɔw, aguadidan mu nneɛma a wɔde kyekyere nneɛma, nkyerɛwee kataso, nneɛma a wɔde kyerɛ ne nneɛma a wɔayɛ.

So 1 mm transparent PVC krataa so nsɛm yɛ katee?

1 mm PVC krataa so nsɛm yɛ den kɛse sen nneɛma a wɔde kyekyere nneɛma a ɛyɛ tratraa. Finished stiffness nso gyina panel dimensions, mmoa ntam kwan, ɔhyew ne formulation.

Dɛn na wɔde 3 mm transparent PVC krataa so nsɛm di dwuma ma?

3 mm krataa so nsɛm fata ma panels a ɛyɛ den, screens a ɛbɔ ho ban, nnwinnadeɛ akatasoɔ, displays, partitions, templates ne fabricated industrial components.

So wobetumi ayɛ PVC krataa so nsɛm a ɛyɛ hyew?

Aane. Wobetumi de vacuum ayɛ grades a ɛfata anaasɛ thermoformed ayɛ no blisters, tray ahorow a wɔde di dwuma , nkataso ne shaped packaging components. Wɔkamfo kyerɛ sɛ wɔnsɔ nneɛma a wɔyɛ no hwɛ.

So wobetumi atintim PVC krataa so nsɛm a ɛda adi pefee?

Aane. Printing-grade PVC betumi aboa screen, UV ne offset tintim bere a wɔasi ink, soro ne curing a ɛne ne ho hyia no so dua akyi.

So wobetumi abɔ clear PVC krataa so nsɛm mu ayɛ no nnaka?

Wobetumi atwitwa folding-box grades a ɛyɛ tratraa no die, de scored na wɔabobɔw ayɛ no transparent cartons. Thickness, grain direction, crease depth ne folding radius nya fitaa ne mpaapaemu so nkɛntɛnso.

So wobetumi atwitwa PVC krataa so nsɛm a ɛda adi pefee no ma ayɛ kɛse?

Aane. Custom dimensions, cut krataa so nsɛm s ne slit rolls betumi asusuw ho sɛnea thickness, tolerance, nnwinnade ne order dodow te.

So sini a ɛbɔ ho ban wɔ hɔ?

Wobetumi de ahobammɔ film ama nneɛma a wɔapaw de atew ɔfasu a ɛtwetwe bere a wɔde rekɔ, tintim, yɛ ne boaboa ano.

So transparent PVC krataa so nsɛm nsuo ntumi nkɔ mu?

PVC ntumi nnye nsuo ntɛm na ɛma nsuo a ɛtumi gyina nsuo ano. Eyi mma nea wɔde ahyɛ mu anaa nea wɔaboaboa ano a wɔawie no ntumi nkɔ nsu mu koraa.

So wobetumi de PVC krataa so nsɛm a ɛda adi pefee adi dwuma wɔ abɔnten?

Standard clear PVC no taa yɛ nea wɔayɛ ama dan mu anaa mmeae a wɔhwɛ so. Ebia abɔnten so dwumadie bɛhia sɛ wɔma UV gyina pintinn na wɔsɔ wim tebea, ɔhyeɛ ne dwumadie nkwa nna a wɔhwɛ kwan hwɛ.

So transparent PVC fata ma aduan a wɔde kyekyere nneɛma?

Sɛnea ɛfata no gyina resin pɔtee, nneɛma a wɔde ka ho, nneɛma a wɔyɛ, aduan ko a wɔde di dwuma, tebea horow a wɔde di nkitaho ne baabi a wɔrekɔ-gua ho mmara so. Ɛsɛ sɛ wɔka aduan a wɔde di nkitaho ho ahwehwɛde ahorow ho asɛm ansa na wɔakra.

So recycled-content transparent PVC wɔ hɔ?

Ebia wobetumi anya nnuru a wɔde nneɛma a wɔasan de adi dwuma a wɔde di dwuma wɔ ɔkwan a ɛfata so. Ɛsɛ sɛ wɔde nhwɛsode a wɔapene so na ɛsɔ nea emu da hɔ, kɔla, mfiridwuma mu su ne sɛnea ɛne mmara no hyia no hwɛ.

Nsonsonoe bɛn na ɛda fitaa a emu da hɔ ne bruu-tinted PVC ntam ?

Fitaa a emu da hɔ PVC wɔ aniwa a ɛnyɛ nea ɛfa biribiara ho kɛse, bere a PVC a ɛyɛ bruu no kura nne bruu kakra a ebetumi de aniwa asiw kɔla a ɛyɛ kɔkɔɔ no ano. Ɛsɛ sɛ wɔpene honam fam nhwɛsode bi so.

So matte anaa frosted transparent PVC wɔ hɔ?

Aane. Wobetumi aka Matte, light-frosted ne heavy-frosted surfaces ho asɛm ama glare a ɛso tew, diffused visibility ne decorative applications.

Dɛn ne MOQ ma PVC krataa so nsɛm s a ɛda adi pefee?

MOQ a wɔahyɛ da ayɛ ma saa ade yi yɛ 1000 kg. Kɔla ahorow a wɔahyɛ da ayɛ, nsusuwii a ɛyɛ soronko, abasobɔde titiriw anaasɛ ahobammɔ-sini ahwehwɛde ahorow betumi anya MOQ soronko.

So PVC krataa so nsɛm nhwɛsoɔ a ɛda adi pefee wɔ hɔ?

Aane. Wobetumi de A4 anaa nea ɛyɛ kakraa bi nhwɛsode ama de ahwɛ sɛnea ɛda adi, ne kɛse, tintim, mpopaho, yɛ ne nea wɔyɛ. Mpɛn pii no, nea ɔtɔ no na otua nneɛma a wɔde mena.

Dɛn ne bere a wɔde yɛ adwuma no?

Bere a wɔtaa yɛ no bɛyɛ nnafua 10-14 wɔ nsɛm a wɔakyerɛkyerɛ mu ne sikatua a wɔahyɛ no den akyi. Ebia nneɛma a wɔayɛ no sɛnea wɔpɛ no behia bere foforo.

Nsɛm bɛn na wɔhwehwɛ na wɔafa aka asɛm?

Fa ne kɛse, ne kɛse, dodow, kɔla, nea ɛda adi pefee, ne soro awie, ɔkwan a wɔfa so yɛ adwuma, nneɛma a ɛwɔ mu a wɔpɛ, nea wɔde kyekyere, baabi a wɔrekɔ ne nkrataa a wɔhwehwɛ a ɛkyerɛ sɛ wodi mmara so ma.

Nya Amanneɛbɔ a Ɛda Hɔ PVC Krataa a Wɔde Di Dwuma Quote