PVC Atade Krataa

PVC Atade Template Krataa Manufacturer ma Ntade a Wɔyɛ

HSQY de PVC ntade nsusuwso nkratafa a ɛyɛ den ma ntade nsusuwso yɛ, nwene-gyinabea nsusuwso, ntama twitwa akwankyerɛ, kɔla ne cuff nsusuwso, kotoku-gyinabea jigs ne mpɛn pii production nhyehyɛe. Saa plastic nkratafa a ɛyɛ mmerɛw anaasɛ ɛyɛ tint yi ma ɛtra hɔ kyɛ yiye, ɛko tia nsu na ɛma ne nsusuwii gyina pintinn sen krataa a wɔde tow nsusuwso.

Nneɛma a ɛwɔ hɔ a wobetumi apaw no bi ne PVC nkrataa a emu da hɔ, bruu-tinted, fitaa-tinted ne amanne-kɔla a ɛwɔ soro a ɛhyerɛn anaa matte, ahobammɔ film, amanne kwan so twa ne rigidity levels soronko. HSQY nneɛma ahorow a ɛtoatoa so no kata template nkratafa a ɛyɛ tratraa so ma tracing ne positioning ne afei nso thicker boards ma bere tenten industrial pattern de di dwuma.

Dɛn Ne PVC Atade Nhwɛso Krataa?

PVC atade nsusuwso krataa yɛ polyvinyl chloride krataa a ɛyɛ den a emu da hɔ anaa kɔla a wɔadan no ntade nsusuwso a wotumi de di dwuma bio, nwene jig anaasɛ ntwitwa akwankyerɛ. Nneɛma a ɛda adi pefee no ma adwumayɛfoɔ tumi hu ntama aburow, nsusuwso a wɔatintim, nsensanee, checks, seam gyinabea ne reference marks wɔ template no ase.

Nea ɛnte sɛ krataa a wɔde pam ade no, wobetumi de PVC nsusuwso adi dwuma mpɛn pii wɔ adan a wɔde nhwɛsode yɛ ne mmeae a wɔyɛ nneɛma mu. Wobetumi atwitwa no nsusuwii ahorow ama kɔla, nsateaa, kotoku, nsateaa, plackets, hems, quilting panels ne ntade afã afoforo wɔ baabi a ɛho hia sɛ wɔde si hɔ daa.

PVC Atade Template Krataa vs Soft PVC Atade Bag Film

PVC Garment Sheet Nneɛma a Wɔpaw

Ntade adwumayɛbea ahorow de template ahorow a ɛyɛ den, kɔla ne nea wɔde yɛ nneɛma a ɛwɔ soro di dwuma. Grade a ɛfata no gyina template kɛse, stiffness a wɔhwehwɛ, ɔkwan a wɔfa so twa, dodow a wɔsan de di dwuma ne sɛ ebia ɛsɛ sɛ nea ɔde di dwuma no hu ntama no ho nsɛm fa krataa no so anaa.

HSQY nneɛma a wɔpaw no bi ne pefee rigid PVC krataa ma ntade templates ne PVC atade nsusuwso nkrataa a kɔla ahorow a ɛda adi pefee . Sɛ wopɛ krataa a ɛyɛ den afoforo a, hwehwɛ PVC krataa a wɔde yɛ adwuma.

Typical PVC Atade Nhwɛsode Krataa Nkyerɛkyerɛmu

HSQY wɔ bɛboro biako atade-nsusuwii krataa ntoatoaso. Table a ɛwɔ aseɛ ha yi bɔ category ne product-page ranges a wɔatintim no mua. Ɛsɛ sɛ wɔsi nea etwa toɔ, ne kɛseɛ, ne boasetɔ, ne soro, ne kɔla ne adansedie so dua ma grade a wɔapaw no.

Sɛnea Wobɛpaw PVC Atade Krataa a Ɛyɛ Den

Thickness nya stiffness, weight, cutting effort, template nkwa ne minimum detail a wobetumi ayɛ. Nyansahyɛ ahorow a ɛwɔ ase ha no yɛ akwankyerɛ a ɛfa paw ho wɔ ɔkwan a ɛkɔ akyiri so. Ɛsɛ sɛ wɔde template kɛse ankasa ne ɔkwan a wɔfa so twa no sɔ nhwɛsode bi hwɛ.

Wɔ template akɛse ho no, stiffness gyina thickness ne unsupported span nyinaa so. Ebia ntama a ɛyɛ tratraa bɛyɛ adwuma ama kɔla akwankyerɛfo ketewaa bi nanso ɛbɛkotow dodo bere a wɔde di dwuma sɛ ntade a ɛyɛ ma no. Fa nhwɛsode no nsusuwii ne ɔkwan a wɔabɔ wɔn tirim sɛ wɔbɛyɛ no mena bere a worebisa nyansahyɛ no.

Nnwuma a Wɔde Di Dwuma wɔ Ntade ne Ntama a Wɔyɛ mu

• Ntade wura nhwɛso ahorow a wotumi de di dwuma bio

• Ntama a wɔde twa ne nea wɔde hwehwɛ nneɛma mu akwankyerɛ

• Kotoku, kɔla, cuff ne placket gyinabea nsusuwso

• Seam allowance ne stitching-line akwankyerɛ ahorow

• Nwene, tintim ne ɔhyew-transfer gyinabea jigs

• Quilting, down-jacket ne padded-panel nsusuwso ahorow

• Leather-nneɛma ne mpaboa nhwɛso templates

• Ofie-ntama, ntama, upholstery ne mpa nsusuwso

• Industrial stencils ne nhyehyɛe a wɔyɛ no mpɛn pii

• Fashion sampling, grading reference ne nhwɛsode nkɔso

Mfaso a ɛwɔ Rigid PVC so ma Ntade Nhwɛsode

• Ntama a ɛne ne ho hyia pefee: Ntama a ɛda adi pefee ma wɔn a wɔyɛ adwuma no hu aburow no kwankyerɛ, nsensanee, check ne nsusuwso a wɔatintim.

• Dimensional stability: Rigid krataa ma pattern geometry kɔ so yiye sen krataa a wɔabobɔw anaasɛ nsu a ɛka ho.

• Wɔde di dwuma mpɛn pii: Ɛfata ma production templates a ɛsɛ sɛ wodi ho dwuma mpɛn pii.

• Nsuo a ɛko tia: Ɛnnye adwumayɛbea mu nsuo wɔ ɔkwan koro no ara so te sɛ krataa so nsusuwso.

• Smooth marking surface: Ɛboa susudua, nkyerɛkyerɛmu nkyerɛwde, nkyerɛwde ne tintim nhyehyɛe a wɔapaw.

• Ɛnyɛ den sɛ wobɛhohoro: Wobetumi de ɔkwan a ɛfata a wɔfa so siesie fie mfutuma ne adwumayɛbea agyiraehyɛde pii.

• Amanneɛbɔ nsakrae: Wobetumi de mfiri atwitwa, abɔ, abɔ anaasɛ wɔde akɔ template nsusuwii a ɛyɛ den mu.

• Ɛka ne adwumayɛ a ɛkari pɛ: Mpɛn pii no ɛma wonya template ano aduru a ne bo nyɛ den a wotumi de di dwuma bio sen acrylic a ɛyɛ den anaa dade a wɔde mfiri ayɛ.

PVC vs Krataa, PET ne Acrylic Atade Nhwɛsode

Twitwa, Punching, Printing ne Marking Options

Wobetumi de mfiri nnwinnade a wɔapaw ama krataa no kɛse ne nsusuwso geometry adan PVC ntade a ɛyɛ den no. Wobetumi de sekan ne straightedge a ɛfata atwitwa nneɛma a ɛyɛ tratraa, bere a nkratafa a ɛyɛ den no taa hwehwɛ sɛ wotwa die, guillotine twa, CNC routing, saw, drilling anaa mfiri akwan foforo a wɔahyɛ so.

Templates betumi ayɛ positioning holes, seam guides, notches, slots, reference windows ne susudua a wɔatintim. Wobetumi de screen printing ne offset-printing nhyehyɛe a wɔapaw adi dwuma bere a wɔahyɛ ink a ɛbata ho, tebea a ɛyow ne nea ɛko tia adwumayɛbea a wɔde di dwuma no so dua akyi.

Sɛnea Wɔtew Burrs ne Edge Damage so

• Fa blade geometry ne ahoɔhare a wɔde twa no hyia krataa no kɛse.

• Boa krataa no so wɔ baabi a ɛyɛ tratraa bere a wɔresakra no.

• Kwati ɔhyew a ɛboro so a nnwinnade a ɛnyɛ den anaasɛ apereperedi a ɛkɔ ntɛmntɛm de ba.

• Fa ntwea so radii a ɛfata di dwuma wɔ baabi a nhyɛso mpɛn pii betumi afi ase apaapae.

• Deburr na hwehwɛ anoano ansa na template no ne ntama a ɛyɛ mmerɛw no adi nkitaho.

• Fa sini a ɛbɔ ho ban no sie kosi sɛ wɔbɛsakra no awie bere a ɛho hia sɛ emu da hɔ wɔ soro no.

Sɛnea Wobɛpaw PVC Atade Nhwɛso Krataa a Ɛteɛ

1. Kyerɛkyerɛ template dwumadie no mu: Tracing, sewing positioning, ntama a wɔtwa, printing alignment anaa structural production jig.

2. Fa nsusuwso nsusuwii ma: Nsusuwii akɛse hwehwɛ sɛ ɛyɛ den kɛse sen kɔla nketewa anaa kotoku mu akwankyerɛfo.

3. Paw nea ɛda adi: Fa krataa a ɛda adi pefee anaa nea wɔde tint ayɛ di dwuma bere a ɛsɛ sɛ ntama aburow, nsusuwso anaa agyiraehyɛde ahorow a atwam kɔ ​​so da adi no.

4. Paw thickness: Kari pɛ stiffness, twa a ɛyɛ den, total template mu duru ne ɔsom-asetra akwanhwɛ.

5. Si so dua sɛ wɔawie asase ani: Nsɔano a ɛhyerɛn ma emu da hɔ kɛse; matte grades brɛ glare ase na ebetumi ama agyiraehyɛde a wotumi hu no atu mpɔn.

6. Si ɔkwan a wɔfa so yɛ adwuma no so dua: Kyerɛ nsa twitwa, die twitwa, punching, routing, saw, drilling anaa printing.

7. Kyerɛkyerɛ nneɛma a wɔhwehwɛ mu: Ka sɛ ebia PVC a ɛnyɛ ɔbaabun, PVC a wɔasan de adi dwuma, kɔla pɔtee bi anaa sini a ɛbɔ ho ban ho hia anaa.

8. Sɔhwɛ nhwɛsoɔ: Hwɛ pefeeyɛ, petee, anoano su, agyiraeɛhyɛdeɛ a ɛbata ho ne adwumayɛ a wɔde di dwuma mpɛn pii ansa na wɔayɛ no kɛseɛ.

Virgin PVC vs Recycled PVC Ntade Nkratafa

Wɔtaa paw Virgin PVC bere a emu da hɔ kɛse, kɔla a ɛyɛ pɛpɛɛpɛ, ɔfasu no su ne honam fam nneɛma a wɔahyɛ so denneennen no yɛ nneɛma a ɛho hia titiriw. Recycled-content PVC betumi afata ama dwumadie a opacity, tint nsakraeɛ anaa aniwa mu nsakraeɛ nketenkete yɛ nea wɔgye tom na ahwehwɛdeɛ titire ne dwumadie template adwumayɛ.

Nneɛma a wɔasan de adi dwuma dodow nkutoo na ɛkyerɛ sɛnea nneɛma a atwa yɛn ho ahyia no yɛ adwuma anaasɛ ɛfata sɛ wɔde di dwuma. Ɛsɛ sɛ adetɔfo kyerɛkyerɛ pefeeyɛ, kɔla, hua, petee, mfiri ahoɔden, anohyeto-nneɛma a wɔhwehwɛ ne nea wotumi hwehwɛ mu. Ɛsɛ sɛ wɔpene nhwɛsode ahorow a efi aduru a wɔahyɛ ho nyansa sɛ wɔbɛyɛ no mu ansa na wɔatɔ nneɛma pii.

Custom Sizes, Kɔla ne Nsakraeɛ Nnwuma

HSQY betumi aboa amanne ntade-nsusuwii krataa nnwuma ma ntade adwumayɛbea ahorow, nsusuwso-yɛ nneɛma a wɔde ma, sewing-machine template integrators, ntama yɛfo ne plastic kyekyɛfo. Nnwuma a ɛwɔ hɔ no gyina grade, thickness ne order volume so.

Quality Control ma PVC Atade Nhwɛsode Nkratafa

Ɛsɛ sɛ wɔsɔ ntade-nsusuwii krataa bi hwɛ sɛnea nneɛma a wɔyɛ a wotumi susuw te. Ɛdenam nkyerɛkyerɛmu a wɔapene so so no, nea ɛka nneɛma a wɔhwɛ so yiye ho no betumi ayɛ:

• Thickness ne thickness a wotumi gyina ano

• Krataa no trɛw, ne tenten, ne ahinanan ne ne diagonal nsakrae

• Flatness, warpage ne curl a ɛyɛ mmerɛw

• Transparency, haze ne tint a ɛyɛ pɛpɛɛpɛ

• Nneɛma a ɛwɔ soro, nsensanee tuntum, nsuo a ɛsen ne nneɛma a wɔde ka ho a wotumi hu

• Rigidity, impact resistance ne edge-crack suban

• Ntintim, agyiraehyɛde ne ahotew a ɛne ne ho hyia

• Protective-film adhesion ne ahotew a woyi fi hɔ

• Twitwa, punching ne drilling adwumayɛ

• Packaging mudi mu kura ne pallet ahobammɔ

Ɔhaw a Ɛtaa Ba ne Nneyɛe a Wɔde Siesie Nneɛma

Nneɛma a Wɔkora So, Nea Wɔde Di Dwuma ne Nea Wɔhohoro

• Fa nkratafa sie petee wɔ pallet anaa rack a wɔahyɛ no den koraa so.

• Fa wo ho to afiri a ɛma ɔhyew, owia hann tẽẽ ne adekoradan mu hyew a ɛboro so ho.

• Kwati sɛ wobɛsensɛn soro a ɛnyɛ nea ɛboa a ebetumi ama woabɔ wo ho akɔneaba anaasɛ wobɛkotow daa.

• Fa nsateaa di dwuma bere a ɛho hia sɛ aniwa mu da hɔ na ama nsateaa nkyerɛwee ne nsensanee so atew.

• Tetew templates a wɔawie no mu ne interleaving nneɛma a ɛho tew bere a stacking.

• Sɔ nneɛma a wɔde tew nneɛma ho hwɛ wɔ baabi ketewaa bi ansa na wode adi dwuma; nnuru a wɔde siw ano a ano yɛ den betumi atow ahyɛ PVC so anaasɛ ayi agyiraehyɛde a wɔatintim afi hɔ.

• Mfa dade, mfa ogya nhyew anaasɛ mfa template ahorow nhyɛ ɔhyew a ano yɛ den a wontumi nni so mu.

Nneɛma a Wɔde Gu Nneɛma Mu ne Nneɛma a Wɔde Kɔ Amannɔne

PVC ntade template nkratafa betumi ayɛ packed wɔ ahobammɔ bags, kraft krataa, PE film, cartons anaa plywood pallets sɛnea thickness, kɛse ne shipment kwan. HSQY akwan a wɔatintim no bi ne sheet packs, pallet loads ne container shipments ma amanaman ntam adetɔfo.

Ansa na wobɛkra no, si nkratafa biara so dua, net weight, gross weight, pallet dimensions, maximum stacking height, edge protection ne moisture protection. Ɛsɛ sɛ wɔboa nkratafa akɛse koraa na ama ntwea so asɛe ne akwantuo a ɛko tia no so atew.

Nsusuwii a ɛfa Mmara a Wodi So ne Nea Ɛbɛkɔ So Daa Ho

HSQY afiri nkratafa a wɔapaw no kyerɛ SGS, RoHS ne quality-system nkrataa. Ɛsɛ sɛ wɔsi nkrataa a wɔhwehwɛ no so dua ma sɛnea wɔayɛ no pɛpɛɛpɛ, kɔla, nneɛma a wɔasan de adi dwuma no dodow ne nea wɔde mena no. Ɛnsɛ sɛ wɔfa no sɛ adansedi krataa a wɔde ma wɔ PVC ade foforo ho no kata ntade-nsusuwii krataa a wɔakra no so.

Ebia wobetumi asan de PVC a ɛyɛ den adi dwuma bio wɔ baabi a ɔkwan a ɛfata a wɔfa so boaboa nneɛma ano na wɔyɛ ho adwuma wɔ hɔ, nanso sɛnea wɔbɛsan de adi dwuma ankasa no gyina mpɔtam hɔ nneɛma a wɔde yɛ adwuma, efĩ, kɔla, nneɛma a wɔde ka ho ne sɛ ebia wɔaboaboa nsusuwso ahorow no ano wɔ ɔkwan soronko so. Kwati sɛ wobɛka PVC ho asɛm sɛ ɛtumi sɛe bio. Wɔ nnwuma a ɛwɔ nneɛma a wɔbɛtew so botae ahorow ho no, susuw template som nkwa nna, thickness optimization, production scrap recovery ne take-back nhyehyɛe ho.

Dɛn Nti na Wopaw HSQY sɛ Wo PVC Atade Krataa a Wɔde Ma?

• Rigid PVC krataa series a wɔyɛɛ maa ntade nsusuwso ne nwene nsusuwso

• Kɔla a emu da hɔ, bruu, fitaa ne kɔla a wɔahyɛ da ayɛ a wobɛpaw

• Nneɛma pii a ɛyɛ den ma tracing sheets a emu yɛ hare ne rigid industrial templates

• Glossy, matte ne ahobammɔ-film soro options

• Nkratafa akɛse a wɔahyɛ da ayɛ ne nnwuma a wɔapaw a wɔatwa no sɛnea ne kɛse te

• Virgin ne nea wɔapaw a wɔasan de adi dwuma-nneɛma ano aduru

• Nhwɛsoɔ mmoa ma pefeeyɛ, twa, tintim ne stiffness nhwehwɛmu

• Bulk pallet packaging ne amanaman ntam export mmoa

Bisa PVC Garment Template Krataa Nhwɛsode ne Bo

Sɛ wopɛ sɛ wunya nyansahyɛ ne nsɛm a wɔafa aka a edi mu a, fa:

• Nea ɛhwehwɛ sɛ ɛyɛ kɛse na ɛyɛ nea wotumi gyina ano

• Krataa no trɛw, ne tenten ne nsusuwso a etwa to

• Kɔla a emu da hɔ, bruu, tint fitaa anaa kɔla a wɔahyɛ da ayɛ

• Glossy, matte anaa biribi foforo a wɔhwehwɛ wɔ soro

• Virgin anaa recycled-content nneɛma a wɔpɛ

• Mfiri a wɔde twa, punching, routing, tintim anaa agyiraehyɛde kwan

• Protective-film ne cut-to-size ahwehwɛde ahorow

• Order dodow ne afe afe nkɔmhyɛ

• Ɔman a wɔrekɔ ne nkrataa a wɔhwehwɛ sɛ wodi so

• Packing, pallet ne nneɛma a wɔde mena ho nsɛm

Fa HSQY di nkitaho denam asɛmmisa krataafa a wɔde bisa nhwɛsode, mfiridwuma ho nsɛm, packing data ne wholesale bo.

FAQ Fa PVC Atade Nhwɛsode Nkratafa Ho

Dɛn ne PVC atade nsusuwso krataa?

Ɛyɛ PVC plastic krataa a ɛyɛ den anaa ɛyɛ den fã a wɔde yɛ ntade nsusuwso a wotumi de di dwuma bio, nwene-gyinabea nsusuwso, ntama twitwa akwankyerɛ ne nneɛma a wɔyɛ. Abasobɔde a emu da hɔ ma wɔn a wɔyɛ adwuma no ma wɔde nsusuwso ahorow ne ntama aburow ne nsusuwso a wɔatintim no hyia.

So PVC ntade krataa ne PVC ntade bag film yɛ pɛ?

Dabi, ntade nsusuwso krataa yɛ katee na wɔde yɛ nsusuwso ne nwene a wɔyɛ. Garment bag film yɛ mmerɛw, ɛyɛ mmerɛw na wɔde yɛ ntade kataso ne bag a wɔde kyekyere nneɛma.

Ntama a ɛyɛ den bɛn na eye ma ntade nsusuwso?

Nkratafa a ɛyɛ tratraa a ne kɛse bɛyɛ 0.3–0.5 mm fata ma tracing a emu yɛ hare ne template nketewa. Wɔtaa de bɛyɛ 0.6–1.5 mm di dwuma ma nsusuwii a wɔde di dwuma wɔ ɔkwan a ɛkɔ akyiri so a wotumi san de di dwuma, bere a nkratafa a ɛyɛ den ma ɛyɛ den kɛse ma mfiridwuma nsusuwso akɛse anaa nea ɛtra hɔ kyɛ.

Nneɛma akɛse bɛn na ɛwɔ hɔ?

HSQY akɛseɛ a wɔtaa de di dwuma no bi ne 610 × 915 mm, 700 × 1000 mm, 900 × 1200 mm, 900 × 1500 mm, 915 × 1830 mm ne 1220 × 2400 anaa 2440 mm. Custom cutting wɔ hɔ wɔ production line a wɔapaw no anohyeto mu.

Dɛn nti na wɔde PVC ntade ntama bi ayɛ bruu?

Bruu a ɛyɛ hann ma krataa no yɛ nea ɛda adi bere a ɛma ɛyɛ mmerɛw sɛ wobehu ne nsusuwii wɔ ntama ne adwumayɛbea ahorow so no. Ebetumi nso aboa ma wɔahu nsonsonoe a ɛda PVC nsusuwso ahorow ntam wɔ ahobammɔ nkrataa a emu da hɔ anaa nneɛma afoforo ho.

So wobetumi atintim PVC ntade nsusuwso nkrataa?

Aane. PVC a ɛyɛ den a wɔapaw no boa screen tintim, offset tintim ne agyiraehyɛde nhyehyɛe a ɛne no hyia. Ɛsɛ sɛ wɔsɔ ink a ɛbata ho, ɛyow ne nea ɛko tia abrasion hwɛ wɔ krataa no grade pɔtee so ansa na wɔayɛ no kɛse.

So wobetumi de laser atwitwa PVC ntade ntama?

Ɛnsɛ sɛ wotwa PVC a wɔahyɛ da ayɛ no anaasɛ wɔkyerɛw wɔ laser mfiri a wɔtaa de di dwuma mu efisɛ wobetumi ayɛ mframa a ɛyɛ hu ne nea ɛporɔw. Fa mfiri twitwa, punching, saw anaa routing akwan a ɛfata di dwuma, anaa paw laser-compatible a ɛnyɛ PVC ade.

Ɔkwan bɛn so na wotwitwa PVC ntade nsusuwso ahorow?

Wobetumi de nnade anaa dies a ɛfata atwitwa nkratafa a ɛyɛ tratraa, bere a nkratafa a ɛyɛ den no betumi ahwehwɛ sɛ wotwa guillotine, CNC routing, saw, punching anaa drilling. Adwinnade a wɔpaw no gyina ne kɛse, ne nsusuwii a ɛyɛ den, abodwokyɛre ne anoano a wɔhwehwɛ sɛ wɔde wie so.

So wotumi san de PVC ntade nsusuwso nkrataa di dwuma?

Aane. Sɛ wɔde di dwuma mpɛn pii a, ɛyɛ wɔn mfaso atitiriw no mu biako sen krataa a wɔde yɛ nneɛma. Nnwuma nkwa nna ankasa gyina ne kɛse, ɔkwan a wɔfa so twa, sɛnea wodi ho dwuma, sɛnea wɔkora so, anoano nhyehyɛe ne dodow a wɔyɛ no kyinhyia so.

So matte PVC nkratafa wɔ hɔ?

Aane. Matte a ɛwɔ soro no betumi atew hann a ɛhyerɛn so na ama ayɛ mmerɛw sɛ wobehu agyiraehyɛde a wɔde nsa akyerɛw anaa wɔatintim. Mpɛn pii no, nneɛma a ɛhyerɛn no ma wotumi hu ade yiye. Ɛsɛ sɛ wosi so dua sɛ ɛwɔ hɔ ma ne kɛse a wɔhwehwɛ.

So HSQY betumi de sini a ɛbɔ ho ban ama wɔ krataa no so?

Protective film wɔ hɔ ma grades ne orders a wɔapaw. Si so dua sɛ ahobammɔ ho hia wɔ ɔfã biako anaa abien no nyinaa na sɔ hwɛ sɛ wobeyi afi hɔ wɔ bere a wɔhwɛ kwan sɛ wɔbɛyɛ ne bere a wɔde mena no akyi.

Nsonsonoe bɛn na ɛwɔ PVC nkratafa a wɔde ɔbaabun ne nea wɔasan de adi dwuma ntam?

Virgin PVC taa ma wotumi di pefeeyɛ, tint ne surface consistency so yiye. Ebia PVC a ɛwɔ nneɛma a wɔasan de adi dwuma no fata ma nsusuwso a ɛnyɛ nea ɛte sɛ nea ɛyɛ fɛ, nanso ɛsɛ sɛ nea wɔayɛ ankasa no du nea wɔhwehwɛ sɛ ɛyɛ petee, ahoɔden, kɔla ne nea ɛne mmara hyia no ho.

So PVC ntade ntama yɛ nea nsu ntumi nkɔ mu?

PVC a ɛyɛ den nnye nsu te sɛ krataa na ɛko tia adwumayɛbea mu nsu a ɛyɛ daa. Ɛsɛ sɛ wɔda so ara sie petee na ɔhyew, nnuru a ano yɛ den ne owia hann tẽẽ ntumi nkɔ hɔ.

So wobetumi ayɛ PVC ntade nkrataa no kɔla ne ne kɛse sɛnea wɔpɛ?

Aane. HSQY betumi asusuw amanne kwan so thicknesses, krataa nsusuwii, transparent tints, opaque kɔla, surface finishes, ahobammɔ film ne cut-to-size ahwehwɛde ahorow sɛnea order volume.

Dɛn ne dodow a ɛba fam koraa a wɔkra?

HSQY ntade-nsusuwii krataa mfonini ahorow a wɔatintim no taa kyerɛw MOQ a ɛbɛyɛ kilogram 1000. Ebia nneɛma a ɛyɛ den, kɔla, sini ahorow a ɛbɔ ho ban anaasɛ nea wɔyɛ no sɛnea wɔpɛ a ɛnyɛ nea wɔahyɛ da ayɛ no behia dodow soronko.

So metumi abisa nhwɛsode ahorow ansa na makra nneɛma pii?

Aane. Wɔkamfo kyerɛ sɛ wɔnyɛ nhwɛsode sɔhwɛ de hwɛ sɛ emu da hɔ, ɛyɛ tint, ɛyɛ tratraa, ɛyɛ den, ɛyɛ nea wɔatwa no yiye, tintim a ɛbata ho na ɛne ntade-yɛ nhyehyɛe a etwa to no hyia.

Nsɛm bɛn na ehia ma asɛm bi a wɔafa aka?

Fa thickness, dimensions, kɔla, soro, nneɛma a wɔpɛ, ahobammɔ-film ahwehwɛde, nsakrae kwan, dodow, destination gua, packaging ahwehwɛde ne ahwehwɛde compliance nkrataa.