PVC finiko sɛbɛn

PVC fini modɛli sɛbɛn dilanbaga ka ɲɛsin finiw dilanni ma

HSQY bɛ PVC finiw jatebɔsɛbɛn gɛlɛnw di finiw misali dilanni kama, finiko-yɔrɔ misaliw, fini tigɛcogo ɲɛjiralanw, kɔla ni mansin misaliw, bɔrɔ-yɔrɔ-jigw ani segin-ka-bɔnyew dilanni labɛncogo. Nin plastiki sɛbɛnw minnu bɛ ye walima minnu ɲɛ ye bulama ye, olu bɛ muɲu, ka ji kɛlɛ ani ka u bonya sabati ka tɛmɛ papiye misaliw kan minnu bɛ kɛ siɲɛ kelen.

Sugandili minnu bɛ sɔrɔ, olu ye PVC sɛbɛnw ye minnu jɛlen don, minnu ɲɛ ye bulu ye, minnu ɲɛ ye fin ye ani minnu ɲɛw bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, ni u ɲɛw bɛ manamana walima u ɲɛw ye fɛn ye, minnu bɛ mɔgɔ tanga, u tigɛcogo ka kɛɲɛ ni mɔgɔw sago ye ani u gɛlɛya hakɛ tɛ kelen ye. HSQY ka fɛn dilannenw sigiyɔrɔma bɛ jatebɔ sɛbɛn finmanw datugu walasa ka tugu ɲɔgɔn kɔ ani ka u bila yɔrɔ la ani fana pankurun belebelebaw walasa ka baara kɛ ni izini misali ye waati jan kɔnɔ.

PVC fini modɛli sɛbɛn ye mun ye?

PVC fini misali sɛbɛn ye polivinili kuloridi sɛbɛn gɛlɛn ye min jɛlen don walima min ɲɛ ye kulɛri ye, min jiginna ka kɛ fini cogoya ye min bɛ se ka baara kɛ kokura, finiko jig walima tigɛlan. O kɛnɛya in b’a to baarakɛlaw bɛ se ka finimugu sumanw ye, motif sɛbɛnnenw, sɛrɛkiliw, sɛkɛsɛkɛliw, seam jɔyɔrɔw ani taamasiyɛnw ye minnu bɛ tali kɛ ja jukɔrɔ.

A tɛ i n’a fɔ papiye dilancogo, PVC jatebɔlan bɛ se ka kɛ siɲɛ caman misali tayɔrɔw la ani fɛn dilanni siraw la. A bɛ se ka tigɛ ka kɛ cogoyaw ye ka kɛɲɛ ni kɔla, bolokɔniw, bɔrɔw, bolokɔniw, plakɛtiw, dakunw, quilting panɛriw ani finiw yɔrɔ wɛrɛw ye yɔrɔ minnu na a ka kan ka bila cogo basigilen na.

PVC fini Modèle Feuille vs Soft PVC fini Sac Film

PVC Garment Sheet Fɛnw sugandicogo

Finifeereso suguya wɛrɛw bɛ baara kɛ ni jatebɔlanw janya, u kulɛriw ani u sanfɛla furakɛli suguya wɛrɛw ye. Jatebɔ ɲuman bɛ bɔ jatebɔlan hakɛ la, a gɛlɛya wajibiyalen na, a tigɛcogo la, baarakɛcogo kura kɛcogo hakɛ la ani ni baarakɛla mago bɛ finiko kunnafoniw ye sɛbɛnfura fɛ.

HSQY ka fɛn dilannenw suganditaw dɔw ye PVC sɛbɛn gɛlɛn jɛlen jɛlen don finiw misaliw kama ani PVC fini misali sɛbɛnw . Ni aw b’a fɛ ka sɛbɛn gɛlɛn wɛrɛw kɛ, aw bɛ se ka... PVC sɛbɛn suguya.

PVC fini modɛli sɛbɛncogo cogoya

HSQY ka fini-sɛbɛnni sɛbɛnw ka ca ni kelen ye. Tablo min bɛ duguma, o bɛ kulu bɔlenw ni fɛn dilannenw ɲɛw lajɛlenw lajɛ. A laban janya, a bonya, a muɲuni, a sanfɛla, a kulɛri ani a seereyaw ka kan ka dafa ka ɲɛsin kalasi sugandilen ma.

PVC finimugu janya sugandicogo

Janya bɛ nɔ bila gɛlɛya la, girinya la, tigɛ cɛsiri la, template ɲɛnamaya la ani kunnafoni fitinin min bɛ se ka bɔ. Ladilikan minnu bɛ duguma, olu ye sugandili ɲɛminɛcogo bɛɛ lajɛlen ye. Misali dɔ ka kan ka kɔrɔbɔ ni jatebɔlan hakɛ yɛrɛ ye ani a tigɛcogo.

Ni template belebelebaw ye, gɛlɛya bɛ bɔ u bonya ni span dɛmɛbali fila bɛɛ la. Fɛnɲɛnɛma finman bɛ se ka baara kɛ kɔla ɲɛminɛbaga fitinin dɔ ye nka a bɛ kɔrɔta kojugu ni a kɛra finimugu dafalen ye. Aw bɛ misali hakɛw ni baarakɛcogo laɲininenw ci ni aw bɛ ladilikan ɲini.

Baarakɛcogo minnu bɛ kɛ finiw ni finiw dilanni na

• Fini master patterns minnu bɛ se ka baara kɛ kokura

• Fini tigɛcogo ni a nɔfɛtaama ɲɛminɛbagaw

• Pocket, collar, cuff ani placket jɔyɔrɔfacogo misaliw

• Seam allowance ani stitching-line ɲɛminɛbagaw

• Broderie, imprimerie ani funteni-transfer positioning jigs

• Quilting, down-jacket ani padded-panel misaliw

• Leather-goods ani sennasanbara misali misaliw

• So-fini, rido, finimugu ani dilancogo

• Industrie stencils ani production layouts minnu bɛ se ka segin-ka-bɔ

• Fashion sampling, grading reference ani prototype yiriwali

Nafa minnu bɛ PVC gɛlɛn na ka ɲɛsin finiw misaliw ma

• Fini sinsinni jɛlen : Jatebɔ jɛlenw b’a to baarakɛlaw bɛ se ka sumanw ɲɛsincogo, sɛrɛkiliw, sɛkɛsɛkɛliw ani motif sɛbɛnnenw ye.

• Dimensions stability: Sɛbɛn gɛlɛn bɛ patɔrɔn jateminɛcogo mara ka ɲɛ ka tɛmɛ papiye dabɔlenw kan walima minnu bɛ nɔ bila ji la.

• Baara kɛli siɲɛ caman: A bɛnnen don fɛn dilanni misaliw ma minnu ka kan ka baara kɛ siɲɛ caman.

• Ji kunbɛncogo : A tɛ atelier nɛnɛ minɛ cogo kelen na i n’a fɔ papier modèles.

• Taamaʃyɛn yɔrɔ nɔgɔlen: A bɛ sumanikɛlanw, ɲɛfɔlisenw, labeliw ani sɛbɛnnikɛlan sugandilenw dɛmɛ.

• Saniya nɔgɔya: Bugun ni atelier taamasiɲɛ caman bɛ se ka bɔ ni saniya fɛɛrɛ ye min bɛ bɛn o ma.

• Yɛlɛma min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye: A bɛ se ka tigɛ ni masin ye, ka sɔgɔ, ka sɔgɔ walima ka sira bila ka kɛ jatebɔcogo gɛlɛnw ye.

• Musaka ni baarakɛcogo balansi: A ka c’a la, a bɛ se ka baara kɛ ni a ye kokura template solution ye min musaka ka dɔgɔn ka tɛmɛ acrylique (akiriliki) walima nɛgɛ gɛlɛn kan min dilannen don ni masin ye.

PVC vs Paper, PET ani Acrylic finiw misaliw

Tigɛ, Punching, Printing ani Marking Sugandiliw

PVC finimugu gɛlɛnw bɛ se ka wuli ni masin baarakɛminɛnw ye minnu sugandira ka kɛɲɛ ni finimugu janya ni misali jateminɛ ye. Fɛn finmanw bɛ se ka tigɛ ni muru ni tigɛlan bɛnnen ye, k’a sɔrɔ a ka c’a la, sɛbɛnfura belebelebaw bɛ mago ɲɛ die tigɛ, guilotine tigɛ, CNC sira, sɔgɔli, sɔgɔli walima masin kɛcogo wɛrɛw la minnu bɛ kɔrɔsi.

Jateblaw bɛ Se ka Kɛ yɔrɔ-yɔrɔ-dingɛw ye, 'sènfɛ-sira-minɛnw, 'sènfɛ-yɔrɔw, 'sènfɛ-yɔrɔw, 'reference windows ani sumanikɛlan sɛbɛnnenw. Écran printing ani offset-printing systems sugandilenw bɛ se ka kɛ ni tintin nɔrɔli, jalen cogoya ani izini baarakɛcogo kɛlɛli dafalen kɔfɛ.

Bururw ni Edge Damage bɛ Dɔgɔya cogo min na

• Aw bɛ blade geometry ni tigɛ teliya bɛn ni sɛbɛnfura janya ye.

• Aw bɛ sɛbɛnfura dɛmɛ yɔrɔ flakɛlen kan jiginni waati.

• Aw bɛ aw yɛrɛ tanga funteni kojugu ma min bɛ sɔrɔ baarakɛminɛnw fɛ minnu bɛ kɛ fɛn ye min tɛ wuli walima minnu bɛ kɛ ni teliyaba ye.

• Aw bɛ baara kɛ ni nkɔni hakɛ bɛnnenw ye yɔrɔ minnu na degun segin-segin bɛ se ka kari daminɛ.

• Deburr ani inspect edges sani template ka contacter fini nɔgɔlen na.

• Aw bɛ filimu lakananen to a nɔ na fo a jiginni ka ban ni a yɔrɔ jɛlen ka kan ka kɛ kosɛbɛ.

PVC fini misali sɛbɛncogo ɲuman sugandicogo

1. Jatebla baara ɲɛfɔ: Tracing, sewing positioning, fini tigɛcogo, sɛbɛnnikɛlan sinsinni walima structural production jig.

2. Aw bɛ jatebɔlan hakɛw di: Patɔrɔn belebelebaw bɛ gɛlɛya caman de wajibiya ka tɛmɛ kɔla walima poyi ɲɛminɛlan misɛnninw kan.

3. Aw bɛ kɛnɛya sugandi: Aw bɛ baara kɛ ni sɛbɛn jɛlen ye walima ni finimugu suman, motifw walima taamasiɲɛ kɔrɔw ka kan ka to ka ye.

4. Aw bɛ janya sugandi: Balance stiffness, cutting difficulty, total template weight and service-life expectations.

5. Surface finish dafa: Grassy glossy bɛ jɛya bonya; matte grades bɛ dɔ bɔ yeelen bɔli la ani u bɛ se ka taamasiyɛnw yecogo ɲɛ.

6. Baarakɛcogo dafalen: Aw bɛ bolo tigɛcogo, die tigɛcogo, punching, routing, sang, drilling walima printing ɲɛfɔ.

7. Fɛn minnu ka kan ka kɛ, olu ɲɛfɔ: A fɔ ni PVC npogotiginin, PVC min kɔnɔfɛnw bɛ segin ka kɛ fɛn wɛrɛ ye, kulɛri kɛrɛnkɛrɛnnen walima lakanani filimu de wajibiyalen don.

8. Kɔrɔbɔli misaliw : Aw bɛ jɛya, flakɛli, dakunw cogoya, taamasiyɛnw nɔrɔli ani segin-ka-bɔnye kɛcogo jateminɛ sani aw ka caman dilan.

Virgin PVC vs PVC Recyclé fini sɛbɛnw

PVC npogotiginin bɛ sugandi tuma caman na ni a jɛlen don kosɛbɛ, ni a kulɛri bɛ bɛn ɲɔgɔn ma, ni a ɲɛda cogoya ani a farikolo cogoya minnu bɛ kɔlɔsi kosɛbɛ, olu de ye fɔlɔfɔlɔko ye. PVC min kɔnɔfɛnw bɛ segin ka kɛ fɛn wɛrɛ ye, o bɛ se ka bɛn baarakɛcogo ma, yɔrɔ minnu na opacity, tint variation walima visual variation misɛnninw bɛ sɔn ka kɛ ani wajibi fɔlɔ ye functional template performance ye.

Kɔnɔkow minnu bɛ segin ka kɛ fɛn wɛrɛw ye, olu hakɛ dɔrɔn tɛ sigida baarakɛcogo walima baarakɛcogo ɲuman jira. Sannikɛlaw ka kan ka jɛya, kulɛri, kasa, fla, masin fanga, fɛn dantigɛlenw wajibiyalenw ani tugu-tugu-ɲɔgɔn kɔ. Misali minnu bɛ bɔ sɛnɛfɛnw dilanni furakɛcogo labɛnni na, olu ka kan ka sɔn ka sɔrɔ ka sanni kɛ caman na.

Custom Sizes, Colors ani fɛn caman tigɛli baarakɛminɛnw

HSQY bɛ se ka dɛmɛ don finiko-jatebɔ-sɛbɛn porozɛw la minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye finiko iziniw kama, misali dilannikɛlaw, finiko-masinw jatebɔlanw, finiko dilannikɛlaw ani plastiki tilabagaw. Baara minnu bɛ sɔrɔ, olu bɛ bɔ u hakɛ, u bonya ani u komandi hakɛ la.

Quality Control for PVC finiw misali sɛbɛnw

Fini-sɛbɛn dɔ ka kan ka jateminɛ ka kɛɲɛ ni a dilanni wajibiyalenw ye minnu bɛ se ka suman. Ka kɛɲɛ ni bɛnkansɛbɛn ye, jogoɲini bɛ se ka kɛ ninnu ye:

• A bonya ni a bonya muɲuni

• Sɛbɛn bonya, a janya, a kɛnɛ ani a cɛmancɛ caman ɲɔgɔnna

• Flatness, warpage ani kurukuru

• Transparence, haze ani tint consistance

• Sanfɛla sɔgɔsɔgɔninjɛ, nɔgɔ nɛrɛmuguma, jibɔ taamasiɲɛw ani fɛnw doncogo yelenw

• Rigidity, impact resistance ani edge-crack kɛcogo

• Sɛbɛnni, taamasiyɛn ani saniya bɛnkan

• Protective-film nɔrɔli ani a bɔli saniyalen

• Tigɛ, punch ani sɔgɔli kɛcogo

• Foroko dafalen ani palɛti lakanani

Gɛlɛya minnu bɛ sɔrɔ tuma caman na ani wale minnu bɛ kɛ ka mɔgɔw latilen

A marali, a minɛcogo ani a saniyacogo

• Aw bɛ sɛbɛnw mara ka kɛ fla ye palɛti walima fɛn dɔ kan min dɛmɛnen don kosɛbɛ.

• Aw bɛ aw yɔrɔ janya sofaw la, tile yeelen tilennen ani fɛnmarayɔrɔ funteni kojugu.

• Aw bɛ aw yɛrɛ tanga jiginni ma min tɛ dɛmɛ sɔrɔ, o min bɛ se ka kɛ sababu ye ka kurukuruni walima kurukuruni kɛ kudayi.

• Aw bɛ ganw kɛ ni ɲɛkisɛ jɛlen nafa ka bon walasa ka bolokɔniw ni sɔgɔsɔgɔninjɛ dɔgɔya.

• Aw bɛ jatebɔlan dafalenw fara ɲɔgɔn kan ni fɛn saniyalenw ye minnu bɛ ɲɔgɔn cɛ ni u bɛ ɲɔgɔn dalajɛ.

• Aw bɛ saniyalanw sɛgɛsɛgɛ yɔrɔ fitini dɔ kan sani aw ka baara kɛ; furaji jugumanw bɛ se ka bin PVC kan walima ka taamasiɲɛ sɛbɛnnenw bɔ.

• Aw kana nɛgɛ, ka tasuma furakɛ walima ka templatew bila funteni jugumanba la min tɛ se ka kunbɛn.

Foroko ni fɛnw bɔli jamana wɛrɛw la

PVC fini misali sɛbɛnw bɛ se ka kɛ bɔrɔw kɔnɔ minnu bɛ u tanga, kraft papier, PE film, cartons walima plywood pallets ka kɛɲɛ ni u bonya, u bonya ani u cicogo ye. HSQY sugandili minnu bɔra kɛnɛ kan, olu ye sɛbɛnw pakew ye, palɛti doni ani minɛnw cili diɲɛ sannikɛlaw ye.

Sani aw ka komandi kɛ, aw bɛ sɛbɛnw dafa pake kelen kɔnɔ, u girinya jɛlen, u girinya bɛɛ lajɛlen, u palɛti hakɛw, u dalajɛli janya maksimali, u dawolo lakanani ani u ka ji lakanani. Sɛbɛn minnu ka bon, olu ka kan ka dɛmɛ kosɛbɛ walasa ka dɔ bɔ nkɔni tiɲɛni na ani ka bolifɛnw ta kɛlɛ.

Laadalata ni sabatili jateminɛw

HSQY ka fɛn dilannenw ɲɛ sugandilenw bɛ SGS, RoHS ani jogo-sitɛmu sɛbɛnw jira. Sɛbɛn minnu wajibiyalen don, olu ka kan ka dafa, u dilanni tigitigi, u kulɛri, u kɔnɔfɛnw hakɛ min bɛ segin ka kɛ fɛn wɛrɛ ye ani u cicogo kulu. Sɛbɛn caman min bɛ PVC fura wɛrɛ kan, o man kan ka jate ko o bɛ fini-talan sɛbɛn yamaruyalen datugu.

PVC gɛlɛn bɛ se ka kɛ fɛn ye min bɛ se ka segin ka kɛ yɔrɔ min na, yɔrɔ min na, fɛnw lajɛcogo ni u baaracogo bɛnnen bɛ yen, nka fɛnw lasegincogo yɛrɛ bɛ bɔ sigida ka fɛnsɔrɔsiraw la, nɔgɔw, u kulɛri, faralifɛnw ani ni misaliw lajɛra u danma. Aw kana PVC ɲɛfɔ ko a bɛ se ka tiɲɛ. Porozɛ minnu ka laɲiniw ye fɛnw dɔgɔyali ye, aw bɛ jateminɛ kɛ misali baarakɛcogo ɲɛnamaya, a janya ɲuman, sɛnɛfɛnw tiɲɛniw lasegincogo ani segin-ka-bɔnye labɛnw.

Mun na i bɛ HSQY sugandi ka kɛ i ka PVC finiw dilanbaga ye?

• PVC sɛbɛnw seriyali gɛlɛnw labɛnna finiw cogoyaw ni finiko misaliw kama

• Sugandili jɛlenw, bulu-bulu, finman ani ka kɛɲɛ ni mɔgɔw sago ye

• A janya caman bɛ kɛ ka ɲɛsin tracing sheets nɔgɔmanw ma ani izini template gɛlɛnw ma

• Glossy, matte ani protective-film surface sugandiliw

• Sɛbɛn hakɛ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye ani baara sugandilenw minnu tigɛra ka kɛɲɛ ni u bonya ye

• Npogotiginin ni fɛn sugandilenw furakɛcogo minnu bɛ se ka segin ka kɛ fɛn wɛrɛw ye

• Misali dɛmɛni walasa ka jɛya, tigɛ, sɛbɛnni ani gɛlɛya jateminɛ

• Palɛti caman pakew ani diɲɛ jamanaw ka jagokɛlaw ka dɛmɛ

PVC fini modɛli sɛbɛnw misaliw ni sɔngɔ ɲini

Walasa ka laadilikan ni kuma fɔlen tigitigi sɔrɔ, i ka:

• A ka kan ka kɛ a janya ni a muɲuni ye

• Sɛbɛn bonya, a janya ani a jatebɔ laban hakɛw

• Tinti jɛlen, bulu, tint finman walima kulɛri ladamu

• Glossy, matte walima surface wajibiyalen wɛrɛ

• Npogotiginin walima fɛn minnu bɛ segin ka kɛ fɛn wɛrɛw ye, olu ka fisa

• Masina tigɛ, punch, sira, sɛbɛnni walima taamasiyɛn kɛcogo

• Lakana-filimu ni tigɛ-ka-bɔ-yɔrɔ wajibiyalenw

• Koman hakɛ ani san o san jateminɛ

• Jamana min bɛ taa yɔrɔ la ani sariya labatoli sɛbɛnw wajibiyalenw

• Packing, pallet ani shipping sariyaw

Aw ye HSQY sɔrɔ ka tɛmɛn ɲininkali ɲɛ walasa ka misaliw ɲini, fɛɛrɛko ɲɛfɔli, pakew kunnafoniw ani jɛgɛfeere sɔngɔko.

Ɲininkaliw PVC finiw misali sɛbɛnw kan

PVC fini misali sɛbɛn ye mun ye?

O ye PVC plastiki sɛbɛn gɛlɛn ye walima min bɛ kɛ ka finiw dilan minnu bɛ se ka baara kɛ kokura, ka finiw dilancogo misaliw dilan, ka fini tigɛlanw ani fɛn dilanni jigw dilan. Kalanso jɛlenw b’a to baarakɛlaw bɛ se ka misaliw bɛn ni finimugu sumanw ni motif sɛbɛnnenw ye.

Yala PVC finimugu ni PVC fini foroko filimu ye kelen ye wa?

Ayi, finiko misali sɛbɛn ka gɛlɛn, wa a bɛ kɛ ka misali dilan ani ka fini dilan. Fini bɔrɔ filimu ka nɔgɔn, a bɛ se ka wuli ani a bɛ kɛ ka fini datugulanw ni pakew bɔrɔw dilan.

A janya jumɛn ka fisa finiw misaliw ma?

Sɛbɛn finman minnu bɛ milimɛtɛrɛ 0,3–0,5 lamini, olu bɛnnen don taamasiyɛn nɔgɔmanw ni jatebɔlan misɛnninw ma. Militiri 0,6–1,5 ɲɔgɔn bɛ kɛ ka caya ka ɲɛsin fɛn bɛɛ ma minnu bɛ se ka baara kɛ kokura, k’a sɔrɔ sɛbɛnfura belebelebaw bɛ gɛlɛya caman di izini misali belebelebaw ma walima minnu bɛ mɛn.

Bonya jumɛnw bɛ sɔrɔ?

HSQY hakɛ minnu bɛ sɔrɔ tuma caman na, olu ye milimɛtɛrɛ 610 × 915, milimɛtɛrɛ 700 × 1000, milimɛtɛrɛ 900 × 1200, milimɛtɛrɛ 900 × 1500, milimɛtɛrɛ 915 × 1830 ani milimɛtɛrɛ 1220 × 2400 walima 2440 ye. Tigɛcogo min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, o bɛ sɔrɔ fɛn dilanni sira sugandilen dancɛ kɔnɔ.

Mun na PVC finimugu dɔw bɛ ni bulu ye?

Bulu jɛman dɔ bɛ sɛbɛnfura to kɛnɛya la ka sɔrɔ k’a cogoya dɔnni nɔgɔya fini ni baarakɛyɔrɔw kan. A bɛ se fana ka dɛmɛ don ka PVC misaliw faranfasi ka bɔ lakanani sɛbɛn jɛlenw na walima fɛn wɛrɛw la.

Yala PVC finiw misali sɛbɛnw bɛ se ka sɛbɛn wa?

Awɔ. PVC yɔrɔ gɛlɛn sugandilenw bɛ dɛmɛ don ɛkran sɛbɛnni na, ka offset sɛbɛnni kɛ ani taamasiyɛn kɛcogo minnu bɛ bɛn ɲɔgɔn ma. Enki nɔrɔli, a jalen ani a sɔgɔli kunbɛncogo ka kan ka sɛgɛsɛgɛ sɛbɛnfura hakɛ tigitigi kan sani a ka kɛ caman ye.

Yala PVC finiw bɛ se ka tigɛ ni laser ye wa?

PVC standard man kan ka tigɛ walima ka ja laser masin kɔrɔw la barisa gazi faratilenw ni gaziw bɛ se ka bɔ. Aw bɛ baara kɛ ni masinw tigɛcogo, sɔgɔli, sɔgɔli walima sira tigɛcogo bɛnnenw ye, walima aw bɛ fɛn dɔ sugandi min tɛ PVC ye, min bɛ se ka kɛ ni laser ye.

PVC finiw misaliw bɛ tigɛ cogo di?

Fɛn finmanw bɛ se ka tigɛ ni muru walima disi bɛnnenw ye, ka sɔrɔ sɛbɛnfura belebelebaw bɛ se ka kɛ sababu ye ka gilotini tigɛ, ka CNC sira tigɛ, ka sɔgɔ, ka sɔgɔ walima ka sɔgɔ. Baarakɛminɛnw sugandili bɛ bɔ u bonya la, u cogoya gɛlɛya la, u muɲuni na ani u dawolo labɛncogo wajibiyalen na.

Yala PVC finiw misali sɛbɛnw bɛ se ka baara kɛ kokura wa?

Awɔ. Baara kɛli siɲɛ caman, o ye u nafaba dɔ ye ka tɛmɛ papiye misaliw kan. Baarakɛ waati yɛrɛ bɛ bɔ a bonya la, a tigɛcogo la, a minɛcogo la, a maracogo la, a dakunw dilanni na ani a dilanni taabolo hakɛ la.

Yala PVC sɛbɛn mattew bɛ sɔrɔ wa?

Awɔ. Matiw bɛ se ka dɔ bɔ yeelen bɔli la ani ka taamasiyɛn sɛbɛnnenw walima taamasiyɛn sɛbɛnnenw yecogo nɔgɔya. A ka c’a la, yɔrɔ minnu bɛ manamana, olu bɛ yecogo jɛlen di kosɛbɛ. A sɔrɔli ka kan ka dafa ka kɛɲɛ ni a janya wajibiyalen ye.

Yala HSQY bɛ se ka filimu lakananen di sɛbɛnfura kan wa?

Filimu min bɛ mɔgɔ tanga, o bɛ sɔrɔ kalandenw ni komandi sugandilenw kama. Aw bɛ a sɛgɛsɛgɛ ni lakanani ka kan ka kɛ fan kelen walima fan fila bɛɛ la ani ka bɔli kɔrɔbɔ, a dilanni ni a ci waati makɔnɔnen kɔfɛ.

Danfara jumɛn bɛ PVC sɛbɛn npogotigininw ni minnu bɛ segin ka kɛ fɛn wɛrɛw ye?

A ka c’a la, Virgin PVC bɛ ɲɛfɔli ɲuman kɛ ka ɲɛsin jɛya, tint ani surface consistency ma. PVC min kɔnɔfɛnw bɛ segin ka kɛ fɛn wɛrɛw ye, o bɛ se ka bɛn misaliw ma minnu tɛ yecogo dɔn kosɛbɛ, nka a dilanni yɛrɛ ka kan ka bɛn flakɛli, fanga, kulɛri ani sariya labatoli sariyaw wajibiyalenw ma.

Yala PVC finiw bɛ ji bɔ wa?

PVC gɛlɛn tɛ ji minɛ i n’a fɔ papier ani a bɛ se ka atelier nɔgɔ normal kɛlɛ. A ka kan ka mara hali bi kɛnɛ kan ani ka yɔrɔ jan funteni na, furakisɛ jugumanw ni tile yeelen tilennen na.

Yala PVC finiw bɛ se ka kɛ ka kɛɲɛ ni u kulɛri ni u bonya ye wa?

Awɔ. HSQY bɛ se ka jateminɛ kɛ ladamucogo janya, sɛbɛnfura hakɛ, tintin jɛlenw, kulɛri minnu tɛ ye, sanfɛla finiw, lakanani filimu ani tigɛ ka kɛɲɛ ni hakɛ wajibiyalenw ye ka kɛɲɛ ni komandi hakɛ ye.

Koman hakɛ fitinin ye mun ye?

HSQY fini-jatebɔsɛbɛn modɛli minnu bɔra kɛnɛ kan, olu ka teli ka MOQ sɛbɛn min bɛ kilo 1000 ɲɔgɔn bɔ. Fɛn minnu tɛ sariya ye, olu janya, u kulɛriw, u lakanani filimuw walima u dilanni ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka hakɛ wɛrɛ de wajibiya.

Yala ne bɛ se ka misaliw ɲini sani ka komandi caman kɛ wa?

Awɔ. A ka ɲi ka misali sɛgɛsɛgɛli kɛ walasa ka a jɛlen, a ɲɛ, a flakɛ, a gɛlɛya, a tigɛcogo ɲuman, a sɛbɛnni nɔrɔli ani a bɛ bɛn fini dilanni taabolo laban ma.

Kunnafoni jumɛnw de ka kan ka kɛ walasa ka quotation sɔrɔ?

Aw bɛ a janya, a bonya, a kulɛri, a sanfɛla, a fɛn min ka di, a lakanani-filimu wajibiyalenw, a jiginni fɛɛrɛ, a hakɛ, a taayɔrɔ suguya, a foroko wajibiyalenw ani a sariya labatoli sɛbɛnw di.