Pvc Gypsum Plafond Film

PVC Jipsum Plafond Film min bɛ kɛ ka plafond decoratif tile

HSQY bɛ PVC jipsi plafond filimu masirilen dilan walasa ka gipsum plafond tile, gypsum boards, mineral fibre boards, siman boards ani kɔnɔna plafond substrat wɛrɛw lamini.

Filimu in bɛ yɔrɔ dɔ di min bɛ kɛ ka fɛnw masiri, ka nɔgɔya ani ka saniya nɔgɔya la, ka ɲɛsin sanfɛlanw jɔlenw ma, minnu bɛ kɛ birow, butikiw, lotɛli, lakɔlisow, dɔgɔtɔrɔsow, dumunikɛyɔrɔw, sigiyɔrɔw kɔnɔ ani jagokɛyɔrɔ wɛrɛw la.

Fɛn min bɛ kɛ ka kɛɲɛ ni sariya ye, o janya tɔgɔlama bɛ se milimɛtɛrɛ 0,075 ma, a bonya dantigɛlen ye milimɛtɛrɛ 1220 ye ani a janya bɛ se mɛtɛrɛ 500 ma. A janya, a bonya, a roll janya, a cogoya, a kulɛri ani a sanfɛla fini minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ sɔrɔ ka kɛɲɛ ni a dilanni taabolo ye ani a komandi hakɛ.

Masiricogo 100 ni kɔ bɛ se ka labɛn, i n’a fɔ fini jɛman, perle, marbre, jirikisɛ, nɛgɛ, jateminɛ, flenw, embossed, high-gloss ani saba yecogo.

Nin fɛn in ye lamination film ye min bɛ kɛ ka PVC -faced gypsum ceiling tiles dilan. A tɛ sanfɛla sɔgɔlen ye min bɛ wuli ni funteni ye, min bɛ sigi lamini siraw kɔnɔ k’a ɲɛsin a yɛrɛ ma.

A ka c’a la, filimu bɛ siri jisigilan labɛnnen ɲɛda la ni nɔrɔlan ye min bɛ bɛn ni nɔrɔli ye ni funteni-presse walima nɛnɛ-lamini fɛɛrɛ ye. O kɔfɛ, sanfɛlan tile dafalen bɛ se ka tigɛ, ka a dakunw labɛn, ka a pake ani ka a bila T-grid plafond sitɛmu bɛnnen kɔnɔ.

Filimu masirilen standard man kan ka fɔ a yɛrɛma ko tasuma tɛ se ka don a la, ji tɛ se ka don a la kudayi walima ko a bɛnnen don boon baara bɛɛ ma. Tasuma-fagalan, VOC dɔgɔyalen ani fɛn dantigɛlenw-kɔlɔsili hakɛw bɛ fɛnw ɲɛfɔcogo danfaralenw ni sɛgɛsɛgɛli rapɔɔriw de wajibiya minnu bɛ u dɛmɛ.

Sɛgɛsɛgɛli kɛ ka fara o kan HSQY ye PVC filimuw dilan walima ka kuma HSQY fɛ walasa ka plafond-film misali ni a dilanni misali labɛn ka kɛɲɛ ni i yɛrɛ sago ye.

Demand PVC Plafond Film sɔngɔko    Patɔrɔn misaliw ɲini

PVC Jipsum Plafond Film Jaw

PVC Jipsum Plafond Film ye mun ye?

PVC gipsum plafond filimu ye polivinili kuloridi finimugu finman ye min sɛbɛnnen don walima min bɛ kɛ ni jiri ye, min bɛ kɛ i n’a fɔ ɲɛda yelen ye gipsum plafond tile lamininenw ni kɔnɔna pankurunw la minnu bɛ tali kɛ a la.

Plafond-tile dilanni waati, filimu bɛ jogin ka bɔ kurukuru dɔ la, ka a datugu walima ka a maga a la ni nɔrɔlan bɛnnen ye, ka a bɛn a dugumalan ma, ka a lamini pankurun labɛnnen kan.

Filimu bɛ plafond tile kulɛri, a cogoya, a kɛnɛya ani a kɛcogo dafalen dilan. A bɛ se fana ka yɔrɔ saniyacogo ɲɛ ani ka jisuma tilennen dɔgɔya ni jisumalan ɲɛfɛla ɲɛda ye.

Plafond tablo dafalen bɛ se ka PVC ɲɛda masirilen, jipisi walima pankurun substrat wɛrɛ, dakun furakɛli ani nɛgɛ walima aliminiyɔmu-foil kɔkanna fara ɲɔgɔn kan ka kɛɲɛ ni plafond dilabaga ka dilan ye.

O fɛn dilannen fana ɲɛfɔlen don ko PVC plafond lamination film, embossed PVC filimu ye gypse tilew kama, decorative PVC plafond papier, PVC ɲɛda filimu ani PVC gypsum-board filimu.

PVC Jipsi plafond filimu ɲɛfɔli

Ɲɛfɔli labanw ka kan ka tɔgɔla janya, muɲuli, bonya, kuru janya, a kɔnɔna cɛmancɛ, kuru girinya, kurukuru sira, misali nimɔrɔ, kulɛri sariya, kɛnɛya, sɔgɔli, nɔrɔcogo ani substrat laɲinilen jira.

PVC Jipsum Plafond Film vs PVC Stretch Plafond Membrane

Sannikɛlaw man kan ka baara kɛ ni daɲɛ fila ninnu ye ɲɔgɔn fɛ bawo u janya, u sɛgɛsɛgɛli, u baarakɛcogo, u sigicogo ani u baarakɛcogo sɛgɛsɛgɛli minnu wajibiyalen don, olu tɛ kelen ye.

Kulɛriw, Patɛriw ani Surface Finishes decorative

Patɔrɔn sugandili ka kan ka dafa ni farikolo ta ye bawo ɛkran jiralanw tɛ se ka kɛnɛya, nɛgɛ nɔw, embossing depth walima final color lasegin ka ɲɛ.

Gypsum Board Lamination kɛcogo

Board Surface Labɛnni

Jipsi pankurun sanfɛla ka kan ka kɛ fla ye, ka saniya, ka ja ani ka kɛ papiye fiyɛw lajɔlen ye, buguri, tulu ani nɔgɔ minnu bɛ se ka dɔ bɔ nɔrɔli fanga la.

A kɛcogo min bɛ kɛ ni nɛgɛ ye

Nɛgɛ min bɛ bɛn o ma, o ka kan ka sugandi ka kɛɲɛ ni PVC furakɛcogo ye, pankurun ɲɛda, lamini teliya, kɛnɛyacogo ani funteni ni nɛnɛ kunbɛncogo wajibiyalen.

Film Alignment ani Tension (Fɛɛrɛw Labɛncogo) ani Tension (Tension).

Web ka kan ka to a cɛmancɛ la ani a ka kan ka to tension kɔrɔsilen kɔnɔ walasa ka kurukuruw, misali tigɛli, dakunw bɛnbaliya ani teleskɔpi bali.

Lamination Hot walima Cold

Funteni, degun, nip cogoya ani layini teliya ka kan ka ladilan walasa ka jɛɲɔgɔnya kelen sɔrɔ k’a sɔrɔ a ma dɔgɔya, ka sɔgɔsɔgɔ, ka kurukuru walima ka sɛbɛn sɛbɛnnen tiɲɛ.

Furakɛcogo ni a kɛcogo

Tablo lamininenw ka kan ka labɛn ka kɛɲɛ ni nɔrɔlikɛla ka waati fɔlen ye sani u ka tigɛ, ka u dalajɛ, ka u da siri, ka u kɔrɔbɔ walima ka u ci.

Tigɛ ni Dawolo Finishing

Tablo dafalenw bɛ se ka tigɛ ka kɛ plafond-tile hakɛ dantigɛlenw ye, ka u tigɛ ani ka u dakunw dafa ka kɛɲɛ ni square, tegular walima customized profile wajibiyalen ye.

Substrats de Board minnu bɛ bɛn ɲɔgɔn ma

Surface Performance ani Ladonni

Surface min saniya ka nɔgɔn

A ka c’a la PVC yɔrɔ nɔgɔlen, a ko ka nɔgɔn ka tɛmɛ jirisunba kan min ɲɛda ye papiye ye, o min ma furakɛ, wa a bɛ se ka dɔ bɔ buguri ni yeelen nɔgɔw yecogo la.

Front-Surface Moisture Resistance (Yɔrɔ-yɔrɔ-yɔrɔ-yɔrɔ-yɔrɔ-yɔrɔ-yɔrɔ-yɔrɔ-yɔrɔ-yɔrɔ-yɔrɔ-yɔrɔ-yɔrɔ-yɔrɔ-yɔrɔ-yɔrɔ-yɔrɔ-yɔrɔ).

PVC layini bɛ se ka dɔ bɔ jisuma tilennen na ni pankurun ɲɛfɛla ye, nka ji kunbɛnni dafalen bɛ bɔ a duguma, a dakunw, a jogindaw, a kɔkanna, a nɔrɔlen ani a sigili la.

Nɔgɔ ni kemikɛli resistance

Saniyalanw, tuluw, banakisɛfagalanw ani jɔli furakisɛw kɛlɛli bɛ bɔ PVC furakɛlicogo la, sɛbɛnni enki la, a tali waati ani a funteni.

Sɔgɔsɔgɔninjɛ ni sɔgɔsɔgɔninjɛ kunbɛnni

Film decoratif sɛbɛnnen bɛ se ka sɔgɔsɔgɔ ni abrasive handling ye. Tablo dafalenw ka kan ka lakana tigɛ, u dalajɛli, u tacogo ani u sigili waati.

Kulɛri ni misali Muɲuli

So kɔnɔ kulɛri muɲuli bɛ bɔ tintin na, PVC dilanni, yeelen, funteni, saniya furaw ani a dilanni kɔlɔsili. Tile yeelen tilennen walima kɛnɛma baara kuntaalajan bɛ sɛgɛsɛgɛli danfaralenw de wajibiya.

Tasuma baarakɛcogo ani boonw ka sariya labatoli

Tasuma baarakɛcogo ka kan ka ɲɛfɔ ni sɛgɛsɛgɛli sariya ye min bɛ sirataama ani ni fɛn dilannenw jɔcogo tigitigi ye min sɛgɛsɛgɛra.

Kɔrɔbɔli jaabi min bɛ kɛ jibɔlan, PVC filimu walima nɛgɛdaga dɔrɔn kan, o man kan ka jira a yɛrɛma i n’a fɔ tasuma hakɛ min bɛ kɛ so sanfɛla tile dafalen walima sanfɛla sigicogo sigilen na.

Sannikɛlaw ka kan ka jamana wajibiyalen dɔn, poroze suguya, sɛgɛsɛgɛli kɛcogo, tasuma jɛnsɛnni danfara, sisi wajibiyalen ani pankurun jɔcogo dafalen sani u ka filimu tasuma-fagalan sugandi.

Kɔrɔbɔli rapɔɔriw ka kan ka PVC furakɛcogo fɔ, a janya tɔgɔlama, a kulɛri, a sɛbɛnnen yɔrɔ, a nɔrɔlen, a jukɔrɔla, a kɛcogo ani a sɛgɛsɛgɛli jaabi.

So kɔnɔ sigida ni fɛnw dantigɛlenw wajibiyalenw

So jɔli minɛnw wajibiyalenw tɛ kelen ye jamana ni poroze ka kɛɲɛ ni o ye. RoHS man kan ka kɛ dalilu fɔlɔ ye min b’a jira ko boon kɔnɔfɛnw walima so kɔnɔ fiɲɛ bɛ sariyaw labato.

Ka kɛɲɛ ni u taayɔrɔ sugu ye, sannikɛlaw bɛ se ka kunnafoniw ɲini REACH fɛnw kan, nɛgɛ gɛlɛnw, ftalatiw, fɔrmadehidi, fɛnɲɛnamafagalanw, sisi bɔlenw ani tasuma-fanga-fɛnw.

PVC filimu, enki, finimugu, nɔrɔlan ani substrat ka kan ka jateminɛ i n’a fɔ plafond lamininen dafalen yɔrɔ min na poroze labatoli wajibiyalen don.

PVC Jipsum Plafond Film baarakɛcogo

• Biro sanfɛlanw: Plafond-tile dilancogo finman, perle ani geometrique jago birow kama.

• Fiyeere kɔnɔna: Plafond tile masirilenw butikiw, jirayɔrɔw ani sannikɛyɔrɔw kama.

• Lotɛliw: Marbre, nɛgɛ, embossed ani premium decorative finiw.

• Restoranaw: Dumunikɛyɔrɔw ka so sanfɛla masirilenw saniya ka nɔgɔn.

• Lakɔlisow: Plafond tile jɛmanw minnu tɛ kɛ ni fɛn wɛrɛ ye ani minnu bɛ kɛ ni misali ye, olu bɛ kɛ kalansow ni foroba yɔrɔw la.

• Dɔgɔtɔrɔsow ni dɔgɔtɔrɔsow: So sanfɛla nɔgɔlenw ka kɛɲɛ ni poroze saniya ni sariya labatoli wajibiyalenw ye.

• Sigida kɔnɔna : Jipsi plafond tile masirilenw ye dumunikɛyɔrɔw, sigiyɔrɔw ani kɔriw kama.

• Foroba sow: Jatigila yɔrɔw, sow ani sigida yɔrɔw sanfɛla sigicogo.

• OEM plafond-tile dilanni: Motɛriw bɛ kɛ ka kɛɲɛ ni sigida gypsum-board ni plafond-tile dilannikɛlaw ye.

PVC Filimu, Aluminiyɔmu papiye ani Plafond tile jɔcogo dafalen

Sɛgɛsɛgɛli minnu bɛ kɛ ka ɲɛsin jogoɲumanya kɔlɔsili ma

• PVC resin, farali ani furakɛli sɛgɛsɛgɛli.

• Nominal thickness ani thickness muɲuni.

• Rollo bonya ni a bonya muɲuni.

• Kuru janya, kuru girinya, a kɔnɔna cɛmancɛ ani a kɛnɛma cɛmancɛ.

• Winding direction, winding tension, telescoping ani dakunw ɲɔgɔndan.

• Reference basigilen girinya ani batch consistency.

• Patɔrɔn nimɔrɔ, kulɛri ani batch-to-batch kulɛri danfara.

• Pattern segin janya ani sɛbɛnni tiɲɛni.

• Gloss, nivo matte ani embossing profondeur.

• Encre nɔrɔli, mugumugu resistance ani saniya resistance.

• Sanfɛla sɔgɔsɔgɔninjɛ, nɔgɔ nɛrɛma, jeli, dingɛ, kurukuru ani nɔgɔ.

• Yɛlɛma min bɛ kɛ ni hakɛ ye lamini funteni jukɔrɔ.

• Nɔrɔli jilama ani PVC -ka-bɔri peel fanga.

• Bond marali funteni ni nɛnɛ kɔfɛ.

• A bɛ se ka kurukuruw, bugun, kurukuruni ani delamination kɛlɛ.

• Finished-board flatness ani sag baarakɛcogo.

• Sɛgɛsɛgɛli minnu bɛ kɛ ni sɔgɔsɔgɔninjɛ, nɔgɔ ani kemikali-saniya sɛgɛsɛgɛliw ye yɔrɔ minnu na a mago bɛ a la.

• Tasuma, sisi, VOC walima fɛn dantigɛlenw sɛgɛsɛgɛli poroze kɛrɛnkɛrɛnnenw kama.

• Kartɔn, palɛti ani minɛnw doni sɛgɛsɛgɛli.

Custom PVC Plafond Film Sugandili

• Nominal 0,075mm gypse plafond filimu.

• A janya bɛ Kɛ ka Bɔ 0,06mm ɲɔgɔn na ka Taa 0,08mm ɲɔgɔn na.

• Standard 1220mm bonya ani customized roll widths.

• Reference 500m roll janya ani custom roll janya.

• Paper-core diamètre ani roll girinya min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Printed side in walima printed side out winding.

• Fɛn jɛman, perle, sanu, warijɛ, marbre, jiri suman ani kabakurun misaliw.

• A bɛ kɛnɛya kosɛbɛ, a bɛ kɛ ni matte ye, a bɛ kɛ ni frosted ye, a bɛ perle ani a bɛ kɛ ni embossed ye.

• Kulɛri ni misali yiriwali min bɛ di kiliyanw ma.

• Pattern swatches ani trial rolls ka lamination sɛgɛsɛgɛli kɛ.

• Tasuma-fagalan ni fɛnw dantigɛlen-kɔlɔsili hakɛ minnu bɛ sɛgɛsɛgɛli kɛ.

• Kartɔn minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, roll labels, pallets ani shipping marks.

Kunnafoni minnu ka kan ka kɛ PVC Plafond Film Quote

• A ka kan ka kɛ a janya ni a muɲuni ye.

• Rollo bonya ni a bonya muɲuni wajibiyalen.

• Kuru janya wajibiyalen, kuru girinya ani kɛnɛma cɛmancɛ hakɛ min ka ca.

• Paper-core diamètre wajibiyalen.

• Printed side in walima printed side out winding direction.

• Kulɛri, patɔrɔn nimɔrɔ ani sanfɛla fini.

• Patɔrɔn seginni janya wajibiyalen ani sɛbɛnni muɲuli.

• Jipsi pankurun, minɛn fiyɛri pankurun, siman pankurun walima fɛn wɛrɛ.

• Board surface material ani ji cogoya.

• Degunni funteni, lamini nɛnɛma walima a dilanni fɛɛrɛ wɛrɛ.

• Adhesive suguya ani reference coat girinya.

• Lamini funteni, tansiyɔn ani layini teliya.

• A ka kan ka kɛ ko a ɲɛkisɛ fanga ni a ka nɛnɛ kunbɛn.

• Tasuma, sisi, VOC walima fɛn dantigɛlenw sariyaw wajibiyalenw.

• Jamana min bɛ taa yɔrɔ la ani poroze wajibiyalenw.

• Koman fɔlɔ hakɛ ani san ɲinini jateminɛlen.

• Packing, destination port ani delivery don wajibiyalen.

Aw ka PVC Plafond Film wajibiyalenw ci

Foroko ni fɛnw lasecogo

Misaliw pakew : Patɔrɔn swatches ni trial rolls misɛnninw bɛ se ka lakana ni PE bɔrɔw ye ani ka u pake kartɔn gɛlɛnw kɔnɔ.

Rollo pake standard : Filimu rollo PVC kelen-kelen bɛɛ bɛ se ka siri ni filimu lakananen ye ka pake kɛ export carton bulama walima rectangulaire kɔnɔ.

Kori lakanani : Roli dakunw ni papiye kɔnɔna bɛ se ka lakana walasa ka dɔ bɔ a mugucili la, a dakun tiɲɛni na ani a nɔgɔli la a minɛtuma na.

Palɛtiw pakew : Kartɔnw bɛ se ka bila plywood kan walima palɛtiw kan minnu tɛ sisi bɔ jamana wɛrɛw la ka kɛɲɛ ni rollo hakɛw ye ani u minɛcogo wajibiyalenw ye.

Minɛn doni : Doni hakɛ bɛ bɔ kuru janya la, kartɔn hakɛ la, palɛti labɛncogo la, minɛn suguya ani sariya kɔnɔ girinya dantigɛliw la.

Sɛnɛfɛnw dilanni waati : A ka c’a la, komandi jɔnjɔnw bɛ tile 7-14 ɲɔgɔn ta, a dilanni, a ɲɛfɔli, a misali, a foroko ani a bilali dafalen kɔfɛ.

PVC Jipsum Plafond Film Data sɛbɛnw

Data- sɛbɛnfura min bɛ kɛ ani test-report jɛgɛnsira minnu bɛ di ni ɲɛ fɔlɔ ye, olu bɛ mara jukɔrɔ.

Sani u ka bɔ kɛnɛ kan, aw k’a jira ko PDF file fila bɛɛ bilala sen kan ani ko u bɛ tali kɛ PVC filimu janya tigitigi, a kulɛri, a cogoya, a dilanni ani a dilanni yɔrɔ la.

   Télécharger PVC Gypsum Plafond Film Data Sheet

   Télécharger PVC Jipsum plafond filimu sɛgɛsɛgɛli rapɔɔri

Sɛbɛnw ni sariya labatoli sɛbɛnw

Sɛbɛn minnu bɛ sɔrɔ, olu bɛ se ka kɛ fɛn dilannenw ɲɛfɔli ye, lakana kunnafoniw sɛbɛnfura min bɛ kɛ s, fɛn dantigɛlenw kunnafoniw, farikolo-nafolo kunnafoniw, tasuma-sɛgɛsɛgɛli kunnafoniw ani jogoɲini seereyaw.

SGS ka kan ka ɲɛfɔ ka kɛɲɛ ni sɛgɛsɛgɛli tigitigi ye min kɛra sanni ka jira iko diɲɛ bɛɛ ka fɛn dilannenw seereyali.

RoHS ɲɛsinnen bɛ fɔlɔ fɛn faratilenw dantigɛli ma kuran ni ɛntɛrinɛti minɛnw kɔnɔ, wa a man kan ka kɛ dalilu jɔnjɔn ye min b’a jira ko sow jɔli minɛnw bɛ sariya labatoli.

ISO 9001 ye jogoɲumanya-sɔrɔ-cogo-sɔrɔ-cogo sariya ye. A tɛ tasuma, VOC, ji, so kɔnɔ-fiɲɛ walima sigida baarakɛcogo sigi a yɛrɛma PVC filimu kama.

Seere tigi, a dilanni yɔrɔ, a bɔko sariyalen, a bonya ani a baara waati ka kan ka lajɛ sani ka seere ɲinini fɛn o fɛn bɔ kɛnɛ kan.

HSQY Duniya Ɲɛjiraliw

Mun na i bɛ HSQY sugandi ka kɛ i ka PVC Gypsum Plafond Film dilanbaga ye?

• PVC filimu masirilen min dilannen don walasa ka gypse plafond-tile lamination.

• Standard nominal thickness bɛ 0,075mm ɲɔgɔn Bɔ.

• Standard 1220mm bonya ani a bonya bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Reference 500m roll janya ani custom roll formats.

• A ka ca ni 100 ye fini jɛman, marbre, nɛgɛ, jiri-kisɛ ani embossed dilanw.

• Yɔrɔ minnu bɛ kɛnɛya kosɛbɛ, minnu bɛ kɛ ni matɛri ye, minnu ye perle ye, minnu bɛ kɛ ni nɛnɛ ye ani minnu bɛ kɛ ni fɛnw ye.

• Pattern matching ani color-development dɛmɛ min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Misali minnu bɛ kɛ ka nɔrɔli ni lamination-line sɛgɛsɛgɛli kɛ.

• Paper cores customized, roll weights ani winding siraw.

• Jogoɲumanya sɛgɛsɛgɛli ka kɛɲɛ ni misaliw ni fɛn ɲɛfɔlenw ye minnu dabɔra.

• Kartɔnw, palɛtiw ani jamana wɛrɛw ka kurunbokari dɛmɛni.

Sani filimu sugandilen ka kɛ caman na, HSQY b’a ɲini ka filimu sugandilen kɔrɔbɔ ni kiliyan ka jipisi pankurun yɛrɛ ye, nɔrɔlan, lamini minɛnw, baarakɛcogo funteni, tansiyɔn ani layini teliya.

Aw ye HSQY lajɛ walasa ka misaliw ni sɔngɔko dɔn

Ɲininkali minnu bɛ kɛ tuma caman na PVC Gypsum Ceiling Film kan

PVC gipsum plafond filimu ye mun ye?

O ye filimu finman ye min sɛbɛnnen don walima min sɔgɔlen don PVC min sirilen bɛ jipisi sanfɛla tile walima pankurunw kan walasa ka masiriyɔrɔ yelen di.

Yala PVC gypsum plafond filimu ni stretch plafond filimu ye kelen ye wa?

Ayi, jipsi plafond filimu bɛ lamini ka kɛ pankurun gɛlɛn dɔ kan. Stretch ceiling membrane bɛ sumaya ani ka tension perimeter tracks kɔnɔ ni gypsum-board substrate tɛ a la.

Yala PVC filimu bɛ don T-grid plafond kɔnɔ k’a ɲɛsin a ma wa?

Ayi, o filimu bɛ fɔlɔ ka lamini jipisi sanfɛla tile kan a dilanni senfɛ. O kɔfɛ, tile dafalen bɛ bila T-grid sitɛmu kɔnɔ min bɛ bɛn a ma.

A janya hakɛ ye mun ye?

A tɔgɔla janya dantigɛlen bɛ 0,075mm ɲɔgɔn na, ni fɛnw ye minnu bɛ se ka kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ sɔrɔ 0,06-0,08mm lamini na.

Filimu bonya min bɛ kɛ ka kɛɲɛ ni sariya ye, o ye mun ye?

HSQY bonya dantigɛlen ye 1220mm ye. A bonya ye milimɛtɛrɛ 1230 ye ani a bonya wɛrɛw bɛ se ka kɛ ka kɛɲɛ ni mɔgɔw sago ye.

Rollo janya min bɛ kɛ ka kɛɲɛ ni sariya ye, o ye mun ye?

Reference rollo janya bɛ se mɛtɛrɛ 500 ma, k’a sɔrɔ ladamu janya bɛ bɔ a janya, a bonya, a kɔnɔna ani a girinya hakɛ cayalenba la.

Masiricogo jumɛnw bɛ sɔrɔ?

Sugandiliw ye finman, perle, marbre, jirikisɛ, kabakurun, sanu, warijɛ, falenfɛnw, jateminɛ, embossed ani customized printed designs ye.

Yala HSQY bɛ se ka bɛn kiliyan dɔ ka misali ma wa?

Awɔ. Kunnafonidila bɛ se ka misali farikoloma, kulɛri jiracogo walima dilancogo dosiye di walasa ka fɛɛrɛ ni komandi fitinin jateminɛ.

Surface fini jumɛnw bɛ sɔrɔ?

Fɛn minnu bɛ sɔrɔ, olu ye gloss haute, semi-gloss, matte, perle, frosted ani embossed textures ye.

Yala PVC filimu bɛ se ka lamini ka kɛ minɛn fiyɛri pankurun kan wa?

A bɛ se ka kɛ a bɛnnen don pankurun sanfɛla, a poroze, a nɔrɔlen, a mankan wajibiyalenw ani a baarakɛcogo kɔrɔbɔlen kɔfɛ.

Yala filimu bɛ se ka lamini ka kɛ siman pankurun kan wa?

Ɔwɔ, ka kɛɲɛ ni sanfɛla alkalinity, nɔgɔ, nɔrɔli bɛnkan ani sirili fanga kuntaalajan sɛgɛsɛgɛli ye.

Nɔrɔlan jumɛn ka kan ka kɛ?

Nɛgɛdaga ka kan ka sugandi ka kɛɲɛ ni PVC furakɛcogo ye, pankurun sanfɛla, lamini kɛcogo, kɛnɛyacogo ani nɛnɛ kunbɛncogo wajibiyalen.

Yala filimu bɛ se ka lamini ni funteni ye wa?

Awɔ. Lamini funteni bɛ se ka kɛ filimu, enki, nɛgɛ, funteni, tansiyɔn ani layini teliya tiɲɛni kɔfɛ.

Yala filimu bɛ se ka lamini ni nɛnɛ ye wa?

Nɛnɛ-lamini nɛgɛ min bɛ bɛn a ma, o bɛ se ka kɛ ka kɛɲɛ n’a furakɛli ni a dilanni wajibiyalenw ye.

Kurukuruw bɛ se ka bali cogo di lamini waati?

Kɔlɔsili roll tension, film alignment, board flatness, adhesive coating, nip pressure, funteni ani layini teliya.

PVC -ni-jipsi jɛɲɔgɔnya fanga bɛ kɔrɔbɔ cogo di?

Jɛɲɔgɔnya fanga bɛ se ka jateminɛ ni bɛnkan ye min bɛ kɛ ni ɲɛgɛnɛsira walima nɔrɔli sɛgɛsɛgɛli ye, a kɛcogo ɲuman kɔfɛ ani funteni walima nɛnɛ kɛlen kɔfɛ.

Yala PVC gypse plafond filimu ji tɛ se ka don wa?

PVC ɲɛda bɛ ɲɛfɛla jisuma kunbɛncogo ɲɛ, nka sanfɛla tile dafalen tɛ ji bɔ a yɛrɛma. Substrat, edges, backing, adhesive ani installation fana ka kan ka jateminɛ.

Yala PVC filimu tasuma tɛ se ka don wa?

A man kan ka fɔ ko tasuma tɛ se ka don a la pewu. Tasuma baarakɛcogo ka kan ka dɛmɛ ni sɛgɛsɛgɛli rapɔɔri ye min bɛ se ka kɛ filimu tigitigi walima plafond-board jɔli dafalen na.

Yala tasuma-fanga-minɛn dɔ bɛ yen wa?

Tasuma-fagalan min bɛ kɛ ka kɛɲɛ ni a kɛcogo kɛrɛnkɛrɛnnen ye, o bɛ se ka jateminɛ ka kɛɲɛ ni sɛgɛsɛgɛli sariya wajibiyalen ye, a bonya, a kulɛri ani a jukɔrɔla.

Yala RoHS b’a jira ko filimu in ye boon jɔlifɛn ye min tɛ fɛnɲɛnamaw tiɲɛ wa?

Ayi RoHS ɲɛsinnen bɛ fɔlɔ fɛnw ma minnu dantigɛlen don kuran ni ɛntɛrinɛti minɛnw kɔnɔ. So jɔli baara bɛ se ka kɛ ni VOC, REACH, tasuma, sisi walima so kɔnɔ fiɲɛ sɛbɛnw ye minnu tɛ kelen ye.

Yala ISO 9001 ye fɛn dilannenw baarakɛcogo seere ye wa?

Ayi ISO 9001 bɛ tali kɛ jɛkulu dɔ ka jogoɲini siratigɛ la, wa a tɛ fɛn kɛrɛnkɛrɛnnenw sɛgɛsɛgɛliw nɔnabila.

Yala PVC sanfɛla bɛ se ka saniya wa?

A ka ca a la, a bɛ se ka ko ni finimugu nɔgɔlen ye ani saniyalan nɔgɔman ye, ni a sɛgɛsɛgɛra ko a bɛ se ka kɛ ni kemikɛli ye. Aw ka kan ka aw yɛrɛ tanga abrasive pads ni aggressive solvents ma.

Yala PVC plafond filimu bɛ se ka kɛ kɛnɛma wa?

Fɛn min bɛ kɛ ka kɛɲɛ ni sariya ye, o dabɔra kɔnɔna plafond baara kama. Kɛnɛma-kɛnɛya bɛ a ɲini ka UV ni waati-dafalen sɛgɛsɛgɛli kɛ u danma.

Jiginni sira jumɛn ka kan ka fɔ?

Aw bɛ a lajɛ ni ɲɛda sɛbɛnnen ka kan ka joginda kɔnɔna na walima kɛnɛma ka da lamini layini wulicogo kan.

Koman hakɛ fitinin ye mun ye?

MOQ min bɛ tali kɛ a la, o bɛ kilo 2000 ɲɔgɔn bɔ. Kulɛri minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, sɛbɛnnikɛlan silinda ani misali danmadɔw bɛ se ka hakɛ caman de wajibiya.

Yala misali misaliw bɛ sɔrɔ wa?

Pattern swatches minnu bɛ yen ani trial rolls misɛnninw bɛ se ka sɔrɔ walasa ka yecogo ni lamini sɛgɛsɛgɛli kɛ.

A dilanni ɲɛminɛ waati ye mun ye?

A ka c’a la, sɛnɛcogo jɔnjɔn bɛ tile 7-14 ɲɔgɔn de wajibiya, a kɛcogo, a ɲɛfɔli, a misali, a foroko ani a bilali dafalen kɔfɛ.

Kunnafoni jumɛnw de ka kan ka kɛ walasa ka quotation sɔrɔ?

Aw bɛ a janya, a bonya, a wulicogo janya, a kɔnɔna, a siricogo, a cogoya, a dugumalan, a nɔrɔlen, a laminicogo, a sɛgɛsɛgɛli wajibiyalenw, a hakɛ, a pakew ani a taayɔrɔ di.

Aw ye Custom PVC Plafond Film Quote sɔrɔ

HSQY Plastic Group ko la

HSQY Plastic Group bɛ PVC gipsum plafond filimuw, embossed PVC filimuw, decorative PVC sɛbɛnfura min bɛ kɛ s, printable PVC filimuw, PET sɛbɛnfura min bɛ kɛ s, PP sɛbɛnfura min bɛ kɛ s ani plastiki fɛnw di diɲɛ B2B ma kiliyanw ye.

HSQY bɛ dɛmɛ don gipsum-board dilannikɛlaw ma, plafond-tile iziniw, laminiko tɔnw, sow jɔlifɛnw donbagaw ni u feerelaw ma ni misali misaliw ye, ka fɛnw ɲɛfɔcogo labɛn, ka kɔrɔbɔli kɛ, ka jogo sɛgɛsɛgɛ ani ka u pakew bila ka taa jamana wɛrɛw la.

Aw ye sɔngɔko sɛbɛn ɲini ani Sample