Pvc Gypsum Dzisasrã Film

PVC Gypsum Dzisasrã Film na Atsyɔ̃ɖoɖo Dzisasrã Tiles

HSQY wɔa atsyɔ̃ɖoɖo PVC gypsum dzisasrã film na laminating gypsum dzisasrã tile, gypsum ʋuƒo, mineral fiber ʋuƒo, siminti ʋuƒo kple bubuwo ememe dzisasrã substrates.

Sinimaa naa atsyɔ̃ɖoɖo, si le gbadzaa eye wòle bɔbɔe be woaklɔe na dzisasrã ƒe xɔtunu siwo wotsɔ ƒo xlãe siwo wozãna le ɔfiswo, fiasewo, amedzrodzeƒewo, sukuwo, kɔdziwo, nuɖuɖudzraƒewo, aƒewo me kple asitsaxɔ bubuwo me.

Nusi wowɔna ƒe titrime le ŋkɔ me abe 0.075mm ene, eƒe kekeme si woɖo ɖi nye 1220mm eye eƒe nufiame agbalẽ xatsaxatsa ƒe didime nye 500m. Woate ŋu awɔ titrime, kekeme, agbalẽ xatsaxatsa ƒe didime, nɔnɔmewo, amadedewo kple anyigba ƒe nuwuwu le ewɔwɔ ƒe ɖoɖo kple nudɔdɔ ƒe agbɔsɔsɔ nu.

Woate ŋu ato atsyɔ̃ɖoɖo ƒe nɔnɔme siwo wu 100 vɛ, siwo dometɔ aɖewoe nye ɣi, dzonu, kpe xɔasi, atikutsetse, ga, geometri, seƒoƒo, nuŋɔŋlɔ, keklẽ gã kple akpa etɔ̃ ƒe nukpɔkpɔ.

Adzɔnu sia nye lamination film na PVC-mo gypsum dzisasrã tile wɔwɔ. Menye dzisasrã ƒe lãkusi si wotsɔa dzoxɔxɔ kekena si wotsɔ dea mɔ siwo ƒo xlãe me tẽe o.

Zi geɖe la, wozãa nusi sɔ kple nusi wotsɔ léa nu ɖe ​​nu ŋu kple dzoxɔxɔ-tete alo fafɛ-lamination-mɔ̃ tsɔ blaa film la ɖe gypsum-ti si wodzra ɖo ƒe mo ŋu. Emegbe woate ŋu atso dzisasrã ƒe tile si wowu enu la, awu enu, ablae eye woatsɔe ade T-grid dzisasrã ƒe ɖoɖo si sɔ me.

Mele be woagblɔ tso atsyɔ̃ɖoɖo ƒe film si wozãna ɖaa ŋu le eɖokui si be dzo mate ŋu age ɖe eme o, tsi mate ŋu age ɖe eme tegbee alo esɔ na xɔtudɔ ɖesiaɖe o. Dzeside siwo me dzo mele o, siwo me VOC mesɔ gbɔ ɖo o kple esiwo dzi wokpɔna le atike siwo ŋu seɖoƒe le me hiã na nɔnɔme tɔxɛwo kple dodokpɔ ŋuti nyatakaka siwo akpe ɖe eŋu.

Dzro nu bubuwo me HSQY embossed PVC film nuwɔna alo te ɖe HSQY ŋu hena dzisasrã-film ƒe nɔnɔme si wowɔ ɖe ɖoɖo nu kple ewɔwɔ ƒe kpɔɖeŋu.

Bia PVC Dzisasrã Film ƒe Asixɔxɔ    Bia Kpɔɖeŋu Kpɔɖeŋuwo

PVC Gypsum Dzisasrã Film Nɔnɔmetatawo

Nukae Nye PVC Gypsum Dzisasrã Film?

PVC gypsum dzisasrã film nye polyvinyl chloride atsyɔ̃ɖoɖo film tsɛ aɖe si wota alo woŋlɔ ɖe edzi si wozãna abe gypsum dzisasrã ƒe tile siwo wotsɔ laminated kple ememe ʋuƒo siwo do ƒome kplii ƒe mo si wokpɔna ene.

Le dzisasrã-tiwo wɔwɔ me la, woɖea film la le agbalẽ xatsaxatsa aɖe me, wotsɔa nulénu si sɔ tsyɔa edzi alo tsɔa nu léae, tsɔa wo sɔna kple nusi wotsɔ ɖoa ​​edzi eye wotsɔa lãgbalẽa ƒoa xlãe ɖe ʋuƒo si wodzra ɖo la ƒe anyime.

Film la wɔa amadede, nɔnɔme, keklẽ kple nɔnɔme si wowu enu le dzisasrãa dzi. Ate ŋu ana anyigba ƒe dzadzɛnyenye nanyo ɖe edzi hã eye wòaɖe tsi ƒe kadodo tẽ kple gypsum-kpea ƒe ŋgɔgbe dzi akpɔtɔ.

Dzisasrã ƒe ʋuƒo si wowɔ vɔ ate ŋu aƒo PVC atsyɔ̃ɖoɖo ƒe mo, gypsum alo ʋuƒo bubu ƒe anyigba, nugbɔ ƒe dɔwɔwɔ kple ga alo aluminum-foil ƒe megbedede nu ƒu le dzisasrãwɔla ƒe nɔnɔme nu.

Wogaɖɔ nusi wowɔ la be PVC dzisasrã lamination film, embossed PVC film na gypsum tile, atsyɔ̃ɖoɖo PVC dzisasrã foil, PVC ŋkume film kple PVC gypsum-board film.

PVC Gypsum Dzisasrã Film ƒe Nɔnɔmewo

Ele be nɔnɔme mamlɛtɔ nade dzesi ŋkɔ me titrime, mɔɖeɖe ɖe nu ŋu, kekeme, agbalẽ xatsaxatsa ƒe didime, nu vevi ƒe didime, agbalẽ xatsaxatsa ƒe kpekpeme, ʋuʋudedi ƒe mɔfiame, kpɔɖeŋu ƒe xexlẽdzesi, amadede ƒe dzidzenu, keklẽ, embossing, adhesive system kple nusi woɖo be woatsɔ awɔe.

PVC Gypsum Dzisasrã Film vs. PVC Keke Dzisasrã Membrane

Mele be nuƒlelawo nazã nya eveawo ɖe wo nɔewo teƒe o elabena eƒe titrime, asitɔtrɔ le nɔnɔmewo ŋu, dɔwɔnu siwo wotsɔ wɔa dɔe, eɖoɖo ƒe ɖoɖo kple dɔwɔwɔ dodokpɔ siwo hiã la to vovo.

Atsyɔ̃ɖoɖo ƒe Amadedewo, Kpɔɖeŋuwo kple Anyigba ƒe Nuwuwu

Ele be woaɖo kpe kpɔɖeŋu tiatia dzi to kpɔɖeŋu ŋutɔŋutɔ zazã me elabena screen displays mate ŋu agbugbɔ gloss, metallic effects, embossing depth alo final color awɔ pɛpɛpɛ o.

Gypsum Board Lamination Dɔwɔwɔ

Board ƒe Anyigba Dzadzraɖo

Ele be gypsum board la ƒe anyigba nanɔ gbadzaa, wòanɔ dzadzɛ, wòaƒu eye pepa ƒe ka siwo me mekɔ o, ke, ami kple ɖiƒoƒo si ate ŋu aɖe aŋenu ƒe ŋusẽ dzi akpɔtɔ manɔ eme o.

Adhesive ƒe Dɔwɔwɔ

Ele be woatia aŋenu si sɔ le PVC ƒe wɔwɔme, ʋuƒoa ƒe ŋkume, lamination ƒe duƒuƒu, dɔyɔyɔ mɔnu kple dzoxɔxɔ kple fafa ƒe tsitretsitsi si hiã nu.

Film ƒe Ðoɖowɔwɔ Kple Tension

Ele be web la nanɔ titina eye wòanɔ tete si dzi wokpɔna te be wòaxe mɔ ɖe flitete, nɔnɔme ƒe tɔtɔ, nugbɔ ƒe masɔmasɔ kple didiƒekpɔkpɔ nu.

Lamination Dzoxɔxɔ alo Vuvɔ

Ele be woatrɔ asi le dzoxɔxɔ, nyaƒoɖeamenu, nip ƒe nɔnɔme kple fli ƒe duƒuƒu ŋu be woakpɔ kadodo ɖeka evɔ womaɖe nɔnɔmetata si wota la dzi akpɔtɔ, akeke, aʋuʋu alo agblẽ nu le eŋu o.

Dɔyɔyɔ Kple Nɔnɔmewɔwɔ

Ele be woatrɔ asi le ʋuƒo siwo wotsɔ lãgbalẽ wɔe ŋu na ɣeyiɣi si aŋenudzrala la kafu hafi woatso wo, aƒo wo nu ƒu, abla wo ɖe wo nɔewo ŋu, ado wo kpɔ alo aɖo wo ɖe wo.

Lãɖeɖe Kple Nugbɔwo Ƒe Nuwuwu

Woate ŋu atso ʋuƒo siwo wowɔ vɔ la ɖe dzisasrã-ti ƒe lolome siwo sɔ me, atso wo eye woawu wo nu le dzogoe ene me, tegular alo nɔnɔme si wowɔ ɖe ɖoɖo nu si hiã nu.

Board Substrates Siwo Sɔ Kple Wo Nɔewo

Anyigba ƒe Dɔwɔwɔ Kple Edzikpɔkpɔ

Anyigba si dzi Klɔ Blɔe

Zi geɖe la, PVC si le gbadzaa la tutu nɔa bɔbɔe wu gypsum-ti si ƒe mo le abe pepa ene si ŋu womewɔ atike ɖo o eye ate ŋu aɖe ke kple ɖi siwo me kɔ la ƒe dzedzeme dzi akpɔtɔ.

Ŋgɔgbe-Anyigba ƒe Tsitretsitsi

PVC ƒe ƒuƒoƒoa ateŋu aɖe tsi ƒe kadodo tẽ kple ʋuƒoa ƒe ŋgɔgbe dzi akpɔtɔ, gake tsi ƒe tsitretsitsi blibo nɔ te ɖe nusi le ete, eƒe goawo, ƒunukpeƒewo, megbe, nusi léna ɖe eŋu kple eɖoɖo dzi.

Ðiƒoƒo Kple Atikewo ƒe Tsitretsitsi

Tsitretsitsi ɖe dzadzɛnyenyenuwo, amiwo, dɔlékuiwutikewo kple xɔtutikewo ŋu nɔ te ɖe PVC ƒe wɔwɔme, agbalẽtata ƒe nuŋlɔtsi, ɣeyiɣi si woatsɔ awɔe kple dzoxɔxɔ dzi.

Tsitretsitsi ɖe Scratch kple Abrasion ŋu

Woate ŋu aƒo atsyɔ̃ɖoɖo film si wota to abrasive handling me. Ele be woakpɔ ʋuƒo siwo wowɔ vɔ ta le wo lãɖeɖe, wo ƒoƒo ƒu ɖekae, wo tsɔtsɔ yi teƒe bubuwo kple wo dede me.

Amadede Kple Kpɔɖeŋu ƒe Anyinɔnɔ Didi

Xɔme amadede ƒe anyinɔnɔ nɔ te ɖe ink, PVC ƒe wɔwɔme, akaɖi, dzoxɔxɔ, atike siwo wotsɔna klɔa nu kple ewɔwɔ dzi kpɔkpɔ dzi. Ɣe ƒe keklẽ tẽ alo gota zazã ɣeyiɣi didi bia be woadoe kpɔ ɖe vovo.

Dzo ƒe Dɔwɔwɔ Kple Xɔtuɖaŋuwo ƒe Sedziwɔwɔ

Ele be woazã dodokpɔ ƒe dzidzenu si sɔ kple adzɔnu si wodo kpɔ ƒe wɔwɔme tututu atsɔ aɖe dzo ƒe dɔwɔwɔ gɔme.

Mele be woatsɔ dodokpɔ me tsonu na gypsum board, PVC film alo adhesive ɖeɖeko afia le eɖokui si abe dzo ƒe dzeside si le dzisasrã ƒe tile bliboa alo dzisasrã ƒe ɖoɖo si woda me ene o.

Ele be nuƒlelawo nade dzesi dukɔ si hiã, dɔa ƒe ƒomevi, dodokpɔmɔnu, dzo ƒe kaka ƒe hatsotsowo, dzudzɔ si hiã kple board ƒe wɔwɔme blibo hafi atia film si me dzo mele o.

Ele be dodokpɔ ŋuti nyatakakawo nagblɔ PVC ƒe wɔwɔme, eƒe titrime le ŋkɔ me, amadede, anyigba si wota, nusi léna ɖe nu ŋu, nusi le ete, kpɔɖeŋu ƒe ɖoɖo kple dodokpɔ me tsonu.

Aƒeme Nutome Kple Nusiwo Woxe Mɔ Ðo ƒe Nudidiwo

Xɔtunuwo ƒe nudidiwo toa vovo le dukɔ kple dɔ si woawɔ me. Mele be woazã RoHS abe kpeɖodzi vevitɔ si fia be xɔtunuwo alo xɔmeya ƒe sewo dzi wɔwɔ o.

Le asi si me woɖo tae nu la, nuƒlelawo ate ŋu abia nyatakaka siwo ku ɖe REACH nuawo, ga kpekpewo, phthalates, formaldehyde, lãmenugbagbeviwo ƒe atike siwo me dzo le, dzudzɔ si dona kple nusiwo wotsɔ kpe ɖe wo ŋu siwo me dzo mele o ŋu.

Ele be woada PVC film, ink, coating, adhesive kple substrate la kpɔ abe laminated ceiling product blibo ene le afisiwo wòhiã be woawɔ ɖe dɔa dzi le.

PVC Gypsum Dzisasrã Film ƒe dɔwɔwɔ

• Ɔfis ƒe dzisasrãwo: Wowɔ xɔtaxɔe ƒe nɔnɔmetata siwo le ɣie, dzonu kple geometric na asitsa ɔfiswo.

• Asitsaƒewo ƒe xɔmenuwo: Atsyɔ̃ɖoɖo ƒe xɔtaxɔwo na fiasewo, xɔ siwo me woɖea nu le kple asitsaƒewo.

• Amedzrodzeƒewo: Marble, ga, embossed kple atsyɔ̃ɖoɖo nyuitɔ kekeake.

• Nuɖuɖudzraƒewo: Atsyɔ̃ɖoɖo ƒe dzisasrã siwo ŋu kɔklɔ le bɔbɔe na nuɖuƒewo.

• Sukuwo: Wotsɔa xɔtaxɔewo kple dutoƒo teƒewo ƒe xɔtunu siwo wotsɔa xɔtaxɔewo kple dutoƒo teƒewo ƒoa xlãe siwo mewɔa akpa aɖeke o eye wowɔa nɔnɔmetatawo le wo ŋu.

• Kɔdziwo kple atikewɔƒewo: Dzisasrã siwo le gbadzaa le dɔa ƒe dzadzɛnyenye kple sedziwɔwɔ ƒe nudidiwo nu.

• Aƒewo ƒe xɔmenuwo: Gypsum-ti siwo wotsɔ ɖo atsyɔ̃ na dzisasrãwo na nuɖaƒewo, nɔƒewo kple xɔdɔmewo.

• Dutoƒoxɔwo: Dzisasrã ƒe ɖoɖowo na amedzrodzeƒewo, akpatawo kple nutoa me dɔwɔƒewo.

• OEM dzisasrã-tile wɔwɔ: Kpɔɖeŋu siwo wowɔ ɖe ɖoɖo nu na nutoa me gypsum-board kple dzisasrã-tile wɔlawo.

PVC Film, Aluminium Foil kple Finished Dzisasrã Tile Dɔwɔɖoɖo

Dodokpɔ Siwo Wokafu be Woatsɔ Akpɔ Dzedzeme Dzi

• PVC resin, additive kple atikewɔwɔ ƒe kpeɖodzi.

• Nominal titrime kple titrime dzigbɔɖi.

• Roll ƒe kekeme kple kekeme ƒe mɔɖeɖe ɖe nu ŋu.

• Roll ƒe didime, roll ƒe kpekpeme, core diameter kple gota diameter.

• Winding mɔfiame, winding tension, didiƒekpɔmɔ̃ kple nugbɔ ƒe ɖoɖowɔwɔ.

• Nufiame gɔmeɖoanyi kpekpeme kple batch ƒe ɖekawɔwɔ.

• Kpɔɖeŋu xexlẽdzesi, amadede kple batch-to-batch amadede ƒe vovototo.

• Kpɔɖeŋu gbugbɔgagblɔ ƒe didime kple ŋkɔ ŋɔŋlɔ ƒe nyateƒetoto.

• Gloss, matte dzidzenu kple embossing goglome.

• Ink adhesion, rubbing tsitretsitsi kple dzadzɛnyenye tsitretsitsi.

• Anyigba ƒe ʋuʋu, teƒe yibɔwo, gel, dowo, flitete kple ɖiƒoƒo.

• Dimensional tɔtrɔ le lamination dzoxɔxɔ te.

• Adhesive tsidzadza kple PVC-to-board peel ŋusẽ.

• Bond ƒe léle ɖe te le dzoxɔxɔ kple fafa ƒe dodo vɔ megbe.

• Tsitretsitsi ɖe ʋuʋudedi, bubbling, curling kple delamination ŋu.

• Finished-board gbadzaa kple sag dɔwɔwɔ.

• Dodokpɔwo le ƒoƒo, ɖiƒoƒo kple atikewo ŋu le afisi wòhiã le.

• Dzo, dzudzɔ, VOC alo nusiwo ŋu woxe mɔ ɖo ƒe dodokpɔwo hena dɔ tɔxɛwo wɔwɔ.

• Kakɛ, pallet kple nugoe-agbawo me dzodzro.

PVC Dzisasrã Film Tiatiawɔblɔɖe

• Nominal 0.075mm gypsum dzisasrã film.

• Wotrɔ asi le woƒe titrime ŋu tso abe 0.06mm va ɖo 0.08mm ene.

• Standard 1220mm kekeme kple customized agbalẽ xatsaxatsa kekeme.

• Nufiame 500m agbalẽ xatsaxatsa ƒe didime kple agbalẽ xatsaxatsa ƒe didime siwo wowɔ ɖe ɖoɖo nu.

• Pepa-nu vevi ƒe didime kple agbalẽ xatsaxatsa ƒe kpekpeme si wowɔ ɖe ɖoɖo nu.

• Wota axa ɖe eme alo wota axa ɖe gota winding.

• Yevu, dzonu, sika, klosalo, kpe xɔasi, atikutsetse kple kpe ƒe nɔnɔmetatawo.

• Kɔkɔ-klẽ, matte, frosted, dzonu kple embossed nuwuwu.

• Amadede kple kpɔɖeŋu ƒe ŋgɔyiyi si asisiwo na.

• Kpɔɖeŋu swatches kple dodokpɔ agbalẽ xatsaxatsawo na lamination dodokpɔ.

• Dzesi siwo me dzo mele o kple esiwo dzi woate ŋu aɖu si ŋu seɖoƒe le si woate ŋu ado kpɔ.

• Kakɛ siwo wowɔ ɖe ɖoɖo nu, agbalẽ xatsaxatsa ƒe dzesidewo, pallets kple meliɖoɖo ƒe dzesiwo.

Nyatakaka Siwo Hiã Na PVC Dzisasrã Film Quote

• Wobia be wòanye titrime kple mɔɖeɖe ɖe nu ŋu.

• Wobia be woate ŋu alɔ̃ ɖe agbalẽ xatsaxatsa ƒe kekeme kple kekeme dzi.

• Wobia tso agbalẽ xatsaxatsa ƒe didime, agbalẽ xatsaxatsa ƒe kpekpeme kple gotagome didime si sɔ gbɔ wu.

• Pepa-nutome ƒe didime si wobia.

• Wota akpa si wota ɖe eme alo wota akpa si wota ɖe gota le mɔ si le tsatsam nu.

• Amadede, kpɔɖeŋu xexlẽdzesi kple anyigba ƒe nuwuwu.

• Kpɔɖeŋu gbugbɔgagblɔ ƒe didime si hiã kple ŋkɔ ŋɔŋlɔ ƒe mɔɖeɖe ɖe nu ŋu.

• Gypsum board, mineral fiber board, siminti board alo nu bubu si wotsɔ wɔa anyigbae.

• Board ƒe anyigba dzi nu kple tsi ƒe nɔnɔme.

• Hot pressing, cold lamination alo nuwɔwɔ ƒe mɔnu bubu.

• Adhesive ƒomevi kple nufiame awudziwui ƒe kpekpeme.

• Lamination dzoxɔxɔ, nyaƒoɖeamenu kple fli ƒe duƒuƒu.

• Ebia be ŋusẽ nanɔ lãgbalẽgoloa ŋu eye wòatsi tre ɖe fafa ŋu.

• Dzo, dzudzɔ, VOC alo atike siwo ŋu seɖoƒe le ƒe dzidzenu siwo hiã.

• Dukɔ si me woayi kple dɔa ƒe nudidiwo.

• Gbãtɔ ƒe nudɔdɔ ƒe agbɔsɔsɔme kple ƒe sia ƒe ƒe didi si wobu.

• Packing, destination port kple ŋkeke si wobia be woatsɔe vɛ.

Ðo Wò PVC Dzisasrã Film Nudidiwo

Nubablɛwo Kple Wo Ðoɖoɖa

Kpɔɖeŋu ƒe babla: Woate ŋu atsɔ PE kotokuwo akpɔ kpɔɖeŋu ƒe kpɔɖeŋuwo kple dodokpɔ ƒe agbalẽ xatsaxatsa suewo ta eye woabla wo ɖe kakɛ sesẽwo me.

Standard roll packing: Woate ŋu atsɔ ametakpɔ film abla PVC film roll ɖesiaɖe eye woatsɔe abla ɖe aɖaka goglo alo dzogoe ene me si wotsɔ ɖoa ​​duta me.

Nu veviwo takpɔkpɔ: Woate ŋu akpɔ agbalẽ xatsaxatsa ƒe nuwuwu kple pepa ƒe nu veviwo ta be woaɖe nutete, nugbɔ ƒe gbegblẽ kple ɖiƒoƒo dzi akpɔtɔ le eŋudɔwɔwɔ me.

Pallet packing: Woate ŋu aƒo kakɛwo nu ƒu ɖe plywood alo fumigation-free export pallets dzi le agbalẽ xatsaxatsa ƒe didime kple wo ŋudɔwɔwɔ ƒe nudidiwo nu.

Agbatsɔtsɔ: Agbatsɔtsɔ ƒe agbɔsɔsɔme nɔ te ɖe agbalẽ xatsaxatsa ƒe didime, aɖaka ƒe didime, pallet ƒe ɖoɖo, nugoe ƒomevi kple mɔxexe ɖe kpekpeme nu le se nu dzi.

Ɣeyiɣi si woatsɔ awɔe: Zi geɖe la, nudɔdɔ siwo wowɔna ɖaa bia abe ŋkeke 7-14 ene le esi woɖo kpe aɖaŋu, nɔnɔme, kpɔɖeŋu, babla kple deposit dzi vɔ megbe.

PVC Gypsum Dzisasrã Film Nyatakaka gbalẽviwo

Wodzra nyatakaka-gbalẽvi kple dodokpɔ-nyatakaka ƒe kadodo siwo wona kpe ɖe axa gbãtɔa ŋu la ɖo ɖe ete.

Hafi nàtae la, ɖo kpe edzi be woda PDF faɛl eveawo siaa ɖe Internet dzi eye be wosɔ ɖe PVC film ƒe titrime, amadede, nɔnɔme, eƒe wɔwɔme kple teƒe si wowɔe le tututu.

   Download PVC Gypsum Dzisasrã Film Nyatakaka gbalẽvi

   Download PVC Gypsum Dzisasrã Film Dodokpɔ Nyatakaka

Ðaseɖigbalẽwo Kple Sedziwɔwɔ Ŋuti Nuŋlɔɖiwo

Nuŋlɔɖi siwo li ate ŋu anye adzɔnuwo ƒe nɔnɔmewo, dedienɔnɔ ŋuti nyatakakawo, atike siwo ŋu seɖoƒe le ŋuti nyatakakawo, nunɔamesi ŋutɔŋutɔwo ŋuti nyatakakawo, dzododokpɔ ŋuti nyatakakawo kple woƒe nyonyome dzikpɔkpɔ ŋuti ɖaseɖigbalẽwo.

Ele be woaɖɔ SGS le dodokpɔ si tututu wowɔ nu tsɔ wu be woatsɔe afia abe xexeame katã ƒe adzɔnuwo ƒe ɖaseɖigbalẽ ene.

RoHS ku ɖe mɔxexe ɖe nusiwo me afɔku le nu le elektrik kple elektrɔnik dɔwɔnuwo me koŋ ŋu eye mele be woazãe abe kpeɖodzi vevitɔ si fia be xɔtunuwo wɔ ɖe se dzi o.

ISO 9001 nye nyonyome-dzikpɔkpɔ-ɖoɖo ƒe dzidzenu. Meɖoa dzo, VOC, tsidzadza, xɔme-ya alo nutome ƒe dɔwɔwɔ anyi le eɖokui si na PVC film la o.

Ele be woalé ŋku ɖe ɖaseɖigbalẽa tɔ, teƒe si wowɔe le, tata si wozãna ɖaa, afisi wòakeke ɖo kple ɣeyiɣi si woatsɔ awɔ dɔe ŋu hafi ata ɖaseɖigbalẽa ƒe nya aɖeke.

HSQY Xexeame Katã ƒe Nukpɔkpɔwo

Nukatae Nàtia HSQY be wòanye Wò PVC Gypsum Ceiling Film Dɔwɔƒe?

• PVC atsyɔ̃ɖoɖo film si woto vɛ na gypsum dzisasrã-tile lamination.

• Standard ŋkɔ ƒe titrime si ade 0.075mm.

• Standard 1220mm kekeme kple kekeme siwo wowɔ ɖe ɖoɖo nu.

• Nufiame 500m agbalẽ xatsaxatsa ƒe didime kple agbalẽ xatsaxatsa ƒe nɔnɔme siwo wowɔ ɖe ɖoɖo nu.

• Wowu 100 ɣi, kpe xɔasi, ga, ati-ku kple embossed ƒe nɔnɔmetatawo.

• Nusiwo le keklẽm ŋutɔ, matte, pearl, frosted kple textured ƒe anyigbawo.

• Kpɔɖeŋu ƒe sɔsɔ kple amadede-toɖoɖo ƒe kpekpeɖeŋu si wowɔ ɖe ɖoɖo nu.

• Kpɔɖeŋuwo na adhesive kple lamination-line dodokpɔ.

• Pepa ƒe nuto siwo wowɔ ɖe ɖoɖo nu, agbalẽ xatsaxatsa ƒe kpekpemewo kple mɔfiame siwo wotsɔ ƒo xlãe.

• Dzɔdzɔmeŋutete me dzodzro le kpɔɖeŋu siwo dzi woda asi ɖo kple nɔnɔme tɔxɛwo nu.

• Export cartons, pallets kple dukɔwo dome meliɖoɖo ƒe kpekpeɖeŋu.

Hafi woawɔe le agbɔsɔsɔ gã me la, HSQY ɖo aɖaŋu be woado film si wotia la kpɔ kple asisi la ƒe gypsum board ŋutɔŋutɔ, adhesive, laminating dɔwɔnuwo, dɔwɔwɔ ƒe dzoxɔxɔ, nyaƒoɖeamenu kple ka ƒe duƒuƒu.

Te ɖe HSQY ŋu hena Kpɔɖeŋuwo kple Asixɔxɔ

Nya Siwo Wobiaa Enuenu Tso PVC Gypsum Ceiling Film Ŋu

Nukae nye PVC gypsum dzisasrã film?

Enye PVC film tsɛ aɖe si wota alo woŋlɔ nu ɖe ​​edzi si wotsɔ lãgbalẽ wɔe ɖe gypsum dzisasrã ƒe tile alo ʋuƒo dzi be wòana atsyɔ̃ɖonu si woate ŋu akpɔ.

Ðe PVC gypsum dzisasrã film sɔ kple stretch ceiling filma?

Ao, wotsɔa gypsum ƒe dzisasrã film la ƒoa xlã ʋuƒo sesẽ aɖe. Wodoa dzo na kekeme ƒe dzisasrã ƒe lãkusi eye wotsɔa wo tea ɖe gotagome mɔwo me gypsum-board substrate manɔmee.

Ðe wotsɔ PVC film la de T-grid ƒe dzisasrã me tẽa?

Ao, wotsɔa lãgbalẽa ƒoa nu ɖe ​​gypsum-dzisasrãa dzi gbã le ewɔwɔ me. Emegbe wotsɔa tile si wowɔ vɔ la dea T-grid ɖoɖo si sɔ me.

Nukae nye titrime si woɖo ɖi?

Dzesi ŋkɔ ƒe titrime anɔ abe 0.075mm, kple customized nɔnɔmewo li le 0.06-0.08mm domedome.

Nukae nye film ƒe kekeme si wozãna ɖaa?

HSQY ƒe kekeme si woɖo ɖi la nye 1220mm. Woate ŋu aƒo nu tso kekeme si nye 1230mm kple kekeme bubu siwo wowɔ ɖe ɖoɖo nu ŋu.

Nukae nye agbalẽ xatsaxatsa ƒe didime si wozãna ɖaa?

Nufiame agbalẽ xatsaxatsa ƒe didime anɔ abe 500m ene, esime didime siwo wowɔ ɖe ɖoɖo nu nɔ te ɖe agbalẽ xatsaxatsa ƒe titrime, kekeme, eƒe nuto kple agbalẽ xatsaxatsa ƒe kpekpeme si sɔ gbɔ wu dzi.

Atsyɔ̃ɖoɖo kawoe li?

Tiatia siwo woate ŋu awɔ dometɔ aɖewoe nye ɣi, dzonu, kpe xɔasi, atikutsetse, kpe, sika, klosalo, seƒoƒo, geometri, nuŋɔŋlɔ kple nɔnɔmetata siwo wota ɖe ɖoɖo nu.

Ðe HSQY ate ŋu asɔ kple asisi aɖe ƒe nɔnɔmea?

Ɛ̃. Asitsalawo ateŋu ana kpɔɖeŋu ŋutɔŋutɔ, amadede ƒe nufiame alo aɖaŋu ƒe faɛl hena mɔ̃ɖaŋununya kple nudɔdɔ suetɔ kekeake ƒe dodokpɔ.

Nukawoe woate ŋu atsɔ awu anyigbae?

Nusiwo li ƒe nuwuwu dometɔ aɖewoe nye gloss gã, semi-gloss, matte, pearl, frosted kple embossed textures.

Ðe woate ŋu atsɔ PVC film la abla ɖe mineral fiber board dzia?

Ate ŋu asɔ ne wodo board la ƒe anyigba, porosity, adhesive, gbeɖiɖi ƒe nudidiwo kple dɔwɔwɔ ƒe nɔnɔmewo kpɔ vɔ.

Ðe woate ŋu atsɔ laminated film la ɖe siminti-gbadzɛ dzia?

Ẽ, ne woado anyigba ƒe alkalinity, tsidzadza, adhesive ƒe ɖekawɔwɔ kple ɣeyiɣi didi ƒe kadodo ƒe ŋusẽ kpɔ.

Atike kae wòle be woazã?

Ele be woatia aŋenu la le PVC ƒe wɔwɔme, ʋuƒoa ƒe anyigba, lamination ƒe ɖoɖo, dɔyɔyɔ ƒe ɖoɖo kple fafa ƒe tsitretsitsi si hiã nu.

Ðe woate ŋu atsɔ dzoxɔxɔ awɔ sinima laea?

Ɛ̃. Woate ŋu azã hot lamination ne woɖo kpe film, ink, adhesive, dzoxɔxɔ, nyaƒoɖeamenu kple ka ƒe duƒuƒu dzi vɔ.

Ðe woate ŋu atsɔ nufamɔ̃ awɔ sinima laea?

Woate ŋu azã nulénu si wotsɔa nu fafɛ ƒoa nui si sɔ le eƒe dɔyɔyɔ kple ewɔwɔ ƒe nudidiwo nu.

Aleke woate ŋu axe mɔ ɖe ʋuʋudedi nu le lamination wɔwɔ me?

Dziɖuɖu agbalẽ xatsaxatsa ƒe tete, film ƒe ɖoɖowɔwɔ, board gbadzaa, adhesive coating, nip nyaƒoɖeamenu, dzoxɔxɔ kple fli ƒe duƒuƒu.

Aleke wodoa PVC kple gypsum ƒe kadodo ƒe ŋusẽ kpɔna?

Woate ŋu ada kadodoa ƒe ŋusẽ kpɔ to dodokpɔ si dzi wolɔ̃ ɖo si nye peel alo adhesion dodokpɔ le nɔnɔme si sɔ megbe kple le dzoxɔxɔ alo fafa megbe.

Ðe PVC gypsum ƒe dzisasrã film la mate ŋu age ɖe eme oa?

PVC mo nana be ŋgɔgbe ƒe tsi tete ŋu nɔa te ɖe enu nyuie wu, gake dzisasrã bliboa ƒe tile mete ŋu gena ɖe eme le eɖokui si o. Ele be woada nusi le anyigba, eƒe goawo, megbenyawo, nusi wotsɔna léa nu ɖe ​​eŋu kple eɖoɖo hã kpɔ.

Ðe PVC film la mate ŋu axɔ dzo oa?

Mele be woagblɔ be dzo mate ŋu age ɖe eme keŋkeŋ o. Ele be woatsɔ dodokpɔ ŋuti nyatakaka si sɔ aɖo kpe dzo ƒe dɔwɔwɔ dzi na film si tututu wowɔ alo xɔtaxɔe ƒe xɔtutu bliboa.

Ðe dzesi si me dzo mele o lia?

Woate ŋu ada dzotsitsi ƒe atike si wozãna koŋ ƒe dɔwɔwɔ kpɔ le dodokpɔ ƒe dzidzenu si hiã, eƒe titrime, amadede kple nusi le ete nu.

Ðe RoHS ɖo kpe edzi be sinima la nye xɔtunu si me gblẽa nu le nutome ŋu oa?

Ao, nusiwo ŋu seɖoƒe le le elektrik kple elektrɔnik dɔwɔnuwo me koŋue RoHS ku ɖo. Xɔtudɔwo ate ŋu abia be woaŋlɔ VOC, REACH, dzo, dzudzɔ alo xɔme ya ƒe nuŋlɔɖi vovovowo.

Ðe ISO 9001 nye adzɔnuwo ƒe dɔwɔwɔ ŋuti ɖaseɖigbalẽa?

Ao, ISO 9001 ku ɖe habɔbɔ aɖe ƒe nyonyomedzikpɔkpɔ ƒe ɖoɖo ŋu eye mexɔ ɖe dodokpɔ siwo wowɔna le adzɔnuwo koŋ ŋu teƒe o.

Ðe woate ŋu akɔ PVC ƒe dzisasrãa ŋua?

Zi geɖe la, woate ŋu atsɔ avɔ falɛfalɛ kple dzadzɛnyenye fafɛ atutue ne woɖo kpe edzi be atikewo sɔ kple wo nɔewo vɔ. Ele be woaƒo asa na abrasive pads kple aggressive solvents.

Ðe woate ŋu azã PVC ceiling film le gotaa?

Woɖo adzɔnu si wozãna ɖaa la na ememe dzisasrã dɔwo. Gbedoxɔ me nɔnɔ bia be woado UV kple yame ƒe nɔnɔme ƒe dzesi si woate ŋu ado kpɔ ɖe vovo.

Mɔ ka dzie wòle be woato aƒo xlãe?

Ðo kpe edzi nenye be ele be woabla mo si wota la ɖe eme alo egodo le alesi lamination-ka la ƒe ʋuʋu le nu.

Nukae nye nudɔdɔ ƒe agbɔsɔsɔ suetɔ kekeake?

Nufiame MOQ la anɔ abe 2000kg ene. Amadede siwo wowɔ ɖe ɖoɖo nu, agbalẽtata ƒe tsilindowo kple nɔnɔmetata tɔxɛwo ate ŋu abia agbɔsɔsɔ si lolo wu.

Ðe kpɔɖeŋu ƒe kpɔɖeŋuwo lia?

Kpɔɖeŋu ƒe kpɔɖeŋu siwo li fifia kple dodokpɔ ƒe agbalẽ xatsaxatsa suewo ate ŋu anɔ anyi hena dzedzeme kple lamination dodokpɔ.

Nukae nye ɣeyiɣi si woatsɔ awɔe?

Zi geɖe la, ewɔwɔ si woɖo ɖi la bia abe ŋkeke 7-14 ene le esi woɖo kpe kpɔɖeŋua, eƒe nɔnɔme, kpɔɖeŋu, nubablɛ kple nusi wotsɔ de eme dzi vɔ megbe.

Nyatakaka kawoe hiã hafi woate ŋu ayɔ nyayɔyɔ?

Na eƒe titrime, kekeme, agbalẽ xatsaxatsa ƒe didime, nuto, winding mɔfiame, kpɔɖeŋu, substrate, adhesive, lamination ɖoɖo, dodokpɔ siwo hiã, agbɔsɔsɔme, packing kple yiyi.

Na PVC Dzisasrã Film Quote si wowɔ ɖe ɖoɖo nu

Ku ɖe HSQY Plastic Group ŋu

HSQY Plastic Group naa PVC gypsum dzisasrã filmwo, embossed PVC films, atsyɔ̃ɖoɖo PVC agbalẽwo, printable PVC films, PET agbalẽwo, PP agbalẽwo kple customized plastic nusiwo wowɔ na dukɔwo dome B2B asisiwo.

HSQY doa alɔ gypsum-board wɔlawo, dzisasrã-tile dɔwɔƒewo, lamination dɔwɔƒewo, xɔtunuwo importers kple mamalawo kple kpɔɖeŋu kpɔɖeŋuwo, nɔnɔmewo ƒe ŋgɔyiyi, dodokpɔ wɔwɔ, nyonyome me toto kple export packing.

Bia Nya Siwo Woagblɔ Kple Kpɔɖeŋu