Samuwar Fim ɗin Rufin Gypsum na PVC

Fim ɗin Rufin PVC na Gypsum don Fale-falen Rufin Ado

Kamfanin HSQY yana ƙera fim ɗin rufin gypsum na PVC mai ado don yin laminating tayal ɗin rufin gypsum, allon gypsum, allon zare na ma'adinai, allon siminti da sauran abubuwan rufin ciki.

Fim ɗin yana samar da shimfidar ado, santsi da sauƙin tsaftacewa ga tayal ɗin rufi da aka daure da ake amfani da su a ofisoshi, shaguna, otal-otal, makarantu, asibitoci, gidajen cin abinci, cikin gidaje da sauran gine-ginen kasuwanci.

Samfurin da aka saba amfani da shi yana da kauri na kusan 0.075mm, faɗin yau da kullun na 1220mm da tsawon abin da aka saba amfani da shi na mita 500. Akwai kauri na musamman, faɗi, tsawon abin da aka keɓance, alamu, launuka da ƙarewar saman da aka keɓance bisa ga tsarin samarwa da adadin oda.

Ana iya ƙirƙirar zane-zanen ado sama da 100, waɗanda suka haɗa da fari, lu'u-lu'u, marmara, ƙwayar itace, ƙarfe, siffar geometric, fure, mai sheƙi, mai haske da kuma tasirin gani mai girma uku.

Wannan samfurin fim ne na lamination don ƙera tayal ɗin rufin gypsum mai fuskar PVC. Ba membrane ne mai zafi da aka sanya kai tsaye a cikin hanyoyin kewaye ba.

Yawanci ana haɗa fim ɗin da fuskar allon gypsum da aka shirya ta amfani da tsarin manne mai dacewa da hot-press ko sanyi-lamination. Sannan ana iya yanke tayal ɗin rufin da aka kammala, a gama shi da gefuna, a naɗe shi a cikin tsarin rufin T-grid mai dacewa.

Bai kamata a bayyana fim ɗin ado na yau da kullun a matsayin mai hana wuta, mai hana ruwa shiga ko kuma wanda ya dace da kowane aikin gini ba. Ma'aunin hana wuta, ƙarancin VOC da ƙayyadadden abubuwan da aka sarrafa suna buƙatar takamaiman bayanai da rahotannin gwaji masu tallafawa.

Bincika ƙarin Samfuran fim ɗin PVC na HSQY ko tuntuɓi HSQY don samun samfurin fim ɗin rufin da aka keɓance.

Nemi Farashin Fim ɗin Rufin PVC    Nemi Samfuran Samfura

Hotunan Fim ɗin Rufin Gypsum na PVC

Mene ne fim ɗin rufin PVC na Gypsum?

Fim ɗin rufin gypsum na PVC wani sirara ne da aka buga ko aka yi masa ado da polyvinyl chloride wanda aka yi amfani da shi azaman rufin fuska da ake iya gani na tayal ɗin rufin gypsum da aka yi da laminated da allunan ciki masu alaƙa.

A lokacin samar da tayal ɗin rufi, ana cire fim ɗin daga naɗi, an shafa shi da manne mai dacewa, an daidaita shi da substrate ɗin sannan a laƙaba shi a saman allon da aka shirya.

Fim ɗin yana ƙirƙirar launi, tsari, sheƙi da kuma yanayin tayal ɗin rufin da aka gama. Hakanan yana iya inganta tsaftace saman da kuma rage taɓawa kai tsaye da danshi da fuskar gaba na allon gypsum.

Allon rufin da aka gama zai iya haɗa fuskar PVC mai ado, gypsum ko wani abu na allo, gyaran gefen da kuma bayan ƙarfe ko aluminum bisa ga ƙirar masana'antar rufin.

An kuma bayyana samfurin a matsayin fim ɗin lamination na rufin PVC, fim ɗin PVC mai laushi don tayal ɗin gypsum, foil ɗin rufin PVC mai ado, fim ɗin da ke fuskantar PVC da fim ɗin gypsum-board na PVC.

Bayanin Fim ɗin Rufin PVC na Gypsum

Bayanan ƙarshe ya kamata su gano kauri mara ƙayyadadden suna, haƙuri, faɗi, tsawon birgima, diamita na tsakiya, nauyin birgima, alkiblar lanƙwasa, lambar tsari, daidaitaccen launi, sheƙi, embossing, tsarin manne da kuma abin da aka yi niyya.

Fim ɗin Rufin Gypsum na PVC da Membrane na Rufin PVC

Bai kamata masu siye su yi amfani da kalmomin biyu a musayar ra'ayi ba saboda kauri da ake buƙata, sassauci, kayan aiki na sarrafawa, tsarin shigarwa da gwaje-gwajen aiki sun bambanta.

Launuka masu ado, alamu da kuma ƙarewar saman

Ya kamata a tabbatar da zaɓin tsari ta amfani da samfurin zahiri domin allon nuni ba zai iya sake haifar da sheƙi, tasirin ƙarfe, zurfin embossing ko launi na ƙarshe daidai ba.

Tsarin Laminating na Allon Gypsum

Shiri na Fuskar Board

Ya kamata saman allon gypsum ya zama lebur, tsafta, busasshe kuma babu zare-zaren takarda, ƙura, mai da gurɓatawa waɗanda za su iya rage ƙarfin mannewa.

Manna Aikace-aikacen

Ya kamata a zaɓi manne mai dacewa bisa ga tsarin PVC, fuskar allo, saurin lamination, hanyar warkarwa da juriyar zafi da danshi da ake buƙata.

Daidaita Fim da Tashin Hankali

Ya kamata ya kasance a tsakiya kuma a ƙarƙashin matsin lamba mai ƙarfi don hana wrinkles, karkatar da tsari, rashin daidaiton gefen da kuma ɗaukar hoto.

Lamination Mai Zafi ko Sanyi

Ya kamata a daidaita zafin jiki, matsin lamba, yanayin nip da saurin layi don cimma daidaiton haɗin kai ba tare da raguwa, miƙewa, ƙuraje ko lalata tsarin da aka buga ba.

Warkewa da Kwandarewa

Ya kamata a sanya allunan laminated a cikin kwantena don lokacin da mai samar da manne ya ba da shawarar kafin a yanke, a tara, a naɗe gefen, a gwada ko a jigilar su.

Yankewa da Kammalawa

Ana iya yanke allon da aka gama zuwa girman tayal na rufin da aka saba, a gyara su kuma a gama su da gefen bisa ga murabba'in da ake buƙata, tegular ko bayanin martaba na musamman.

Ƙananan Allon da suka dace

Aikin Fuskar da Gyara

Fuskar da ke da sauƙin tsaftacewa

Faɗin PVC mai santsi gabaɗaya yana da sauƙin gogewa fiye da allon gypsum mai fuskar takarda wanda ba a yi masa magani ba kuma yana iya rage ganin ƙura da tabo masu sauƙi.

Juriyar Danshin Gaba

Layer ɗin PVC zai iya rage hulɗar danshi kai tsaye da fuskar gaba ta allon, amma cikakken juriyar ruwa ya dogara da substrate, gefuna, haɗin gwiwa, baya, manne da shigarwa.

Tabo da Juriyar Sinadarai

Juriyar masu tsaftacewa, mai, magungunan kashe ƙwayoyin cuta da sinadarai na gini ya dogara ne da tsarin PVC, tawada ta bugawa, lokacin fallasa da zafin jiki.

Juriyar Karce da Tsayayya

Ana iya goge fim ɗin ado da aka buga ta hanyar amfani da gogewa. Ya kamata a kare allon da aka gama yayin yankewa, tarawa, jigilar kaya da shigarwa.

Launi da Dorewa

Dorewa launin cikin gida ya dogara ne da tawada, tsarin PVC, haske, fallasa zafi, sinadarai na tsaftacewa da kuma sarrafa samarwa. Hasken rana kai tsaye ko amfani da shi a waje na dogon lokaci yana buƙatar gwaji daban.

Aikin Gobara da Bin Dokoki na Gine-gine

Dole ne a ayyana aikin wuta ta amfani da ƙa'idar gwaji da ta dace da kuma ainihin ginin samfurin da aka gwada.

Sakamakon gwaji na allon gypsum, fim ɗin PVC ko manne kawai bai kamata a gabatar da shi ta atomatik a matsayin ƙimar wuta na cikakken tayal ɗin rufi ko tsarin rufin da aka shigar ba.

Masu siye ya kamata su gano ƙasar da ake buƙata, nau'in aikin, hanyar gwaji, rarrabawa da yaɗuwar wuta, buƙatar hayaki da kuma kammala tsarin allo kafin zaɓar fim ɗin da ke hana wuta.

Rahoton gwaji ya kamata ya bayyana tsarin PVC, kauri mai yawa, launi, saman da aka buga, manne, substrate, yanayin samfurin da sakamakon gwajin.

Bukatun Muhalli na Cikin Gida da Abubuwan da Aka Iyakance

Bukatun kayan gini sun bambanta dangane da ƙasa da aikin. Bai kamata a yi amfani da RoHS a matsayin babban shaidar bin ƙa'idodin kayan gini ko iska a cikin gida ba.

Dangane da kasuwar da za a je, masu saye za su iya neman bayanai game da abubuwan REACH, ƙarfe masu nauyi, phthalates, formaldehyde, mahaɗan halitta masu canzawa, samar da hayaki da kuma ƙarin abubuwan hana harshen wuta.

Ya kamata a kimanta fim ɗin PVC, tawada, shafi, manne da substrate a matsayin cikakken samfurin rufin da aka laminated inda ake buƙatar bin ƙa'idodin aikin.

Aikace-aikacen PVC Gypsum Rufi Film

• Rufin ofis: Zane-zanen rufin da aka yi da farin tayoyin lu'u-lu'u da kuma na siffofi na siffofi don ofisoshin kasuwanci.

• Kayan cikin gida: Tayal ɗin rufi na ado don shaguna, ɗakunan nunin kaya da cibiyoyin siyayya.

• Otal-otal: Marmara, ƙarfe, fenti mai kauri da kuma kayan ado na musamman.

• Gidajen Abinci: Falo mai sauƙin tsaftacewa na rufin da ake amfani da shi wajen yin abinci.

• Makarantu: Tayal ɗin rufi mai tsaka-tsaki da tsari don azuzuwan da wuraren jama'a.

• Asibitoci da asibitoci: Falo mai santsi na rufin da ya dace da tsaftar aikin da kuma buƙatun bin ƙa'idodi.

• Cikin gida: Tayal ɗin rufin gypsum masu ado don kicin, wuraren zama da kuma hanyoyin shiga.

• Gine-ginen jama'a: Tsarin rufin wuraren karɓar baƙi, dakunan taro da wuraren jama'a.

• Samar da tayal ɗin rufi na OEM: Tsarin musamman ga masana'antun tayal ɗin gypsum da rufin gida.

Fim ɗin PVC, Aluminum Foil da Tsarin Tayal ɗin Rufi da aka Gama

Gwaje-gwajen Kula da Inganci da Aka Ba da Shawara

• Tabbatar da resin PVC, ƙari da tsari.

• Juriyar kauri da kauri mara iyaka.

• Juriyar faɗin birgima da faɗi.

• Tsawon birgima, nauyin birgima, diamita na tsakiya da diamita na waje.

• Alkiblar lanƙwasa, ƙarfin lanƙwasawa, na'urar hangen nesa da kuma daidaita gefen.

• Nauyin tushen tunani da daidaiton rukuni.

• Lambar tsari, launi da bambancin launi tsakanin tsari da tsari.

• Tsawon maimaita tsari da daidaiton rajista.

• Mai sheƙi, matakin matte da zurfin embossing.

• Mannewa da tawada, juriyar shafawa da kuma juriyar tsaftacewa.

• Ƙuraje a saman fata, baƙaƙen tabo, gels, ramuka, wrinkles da gurɓatawa.

• Canjin girma a ƙarƙashin zafin lamination.

• Jikewa mai mannewa da ƙarfin barewar PVC zuwa allon.

• Rike haɗin gwiwa bayan fallasa zafi da danshi.

• Juriya ga kuraje, kumfa, curling da delamination.

• Faɗin allon da aka gama da kuma aikin sag.

• Gwaje-gwajen gogewa, tabo da kuma tsaftace sinadarai inda ake buƙata.

• Gwaje-gwajen harshen wuta, hayaƙi, VOC ko gwaje-gwajen abubuwan da aka ƙayyade don ayyuka na musamman.

• Duba kwali, fale-falen kaya da kwantena.

Zaɓuɓɓukan Fim ɗin Rufin PVC na Musamman

• Fim ɗin rufin gypsum mai lamba 0.075mm.

• Kauri na musamman daga kimanin 0.06mm zuwa 0.08mm.

• Faɗin mitoci 1220 na yau da kullun da faɗin birgima na musamman.

• Nau'in tsawon birgima mai mita 500 da tsawon birgima na musamman.

• Nauyin takarda mai siffar ƙwallo da kuma naɗin da aka keɓance.

• An buga gefen da aka buga ko kuma aka buga gefen da aka fitar.

• Fari, lu'u-lu'u, zinariya, azurfa, marmara, hatsin itace da duwatsu.

• Kammalawa masu sheƙi sosai, matte, mai santsi, lu'u-lu'u da kuma embossed.

• Tsarin launi da tsari da abokin ciniki ya samar.

• Zane-zanen samfura da kuma na'urorin gwaji don gwajin lamination.

• Ana iya gwada ma'aunin hana harshen wuta da kuma ma'aunin da aka takaita amfani da shi wajen sarrafa abubuwa.

• Kwalaye na musamman, lakabin birgima, pallets da alamun jigilar kaya.

Bayanin da ake buƙata don ƙimar fim ɗin rufin PVC

• Kauri da haƙuri da ake buƙata.

• Faɗin birgima da kuma jurewar faɗin da ake buƙata.

• Tsawon birgima da ake buƙata, nauyin birgima da kuma matsakaicin diamita na waje.

• Ana buƙatar diamita na core-paper.

• An buga gefen da aka buga a ciki ko kuma a buga a waje da aka juya.

• Launi, lambar tsari da kuma kammala saman.

• Tsawon maimaita tsari da haƙurin yin rijista da ake buƙata.

• Allon gypsum, allon fiber na ma'adinai, allon siminti ko wani abu makamancin haka.

• Kayan saman allon da yanayin danshi.

• Matsi mai zafi, lamination mai sanyi ko wani tsari na samarwa.

• Nau'in manne da nauyin gashin da aka yi amfani da shi.

• Zafin lamination, matsin lamba da saurin layi.

• Ƙarfin barewa da juriyar danshi da ake buƙata.

• Ƙa'idodin harshen wuta, hayaƙi, VOC ko ƙa'idodin abubuwan da aka ƙayyade.

• Ƙasar da ake zuwa da kuma buƙatun aikin.

• Adadin odar farko da kuma ƙimar buƙata ta shekara-shekara.

• Shiryawa, tashar jiragen ruwa da kuma ranar isarwa da ake buƙata.

Aika Bukatun Fim ɗin Rufin PVC ɗinku

Marufi da Isarwa

Samfurin tattarawa: Za a iya kare zane-zanen zane da ƙananan biredi na gwaji da jakunkunan PE kuma a cushe su a cikin kwalaye masu tauri.

Marufin kwali na yau da kullun: Kowace fim ɗin PVC za a iya naɗe ta da fim mai kariya sannan a saka ta a cikin kwalin fitarwa mai zagaye ko murabba'i.

Kariyar asali: Ana iya kare ƙarshen birgima da kuma tsakiyar takarda don rage niƙa, lalacewar gefen da gurɓatawa yayin sarrafawa.

Marufi na fale-falen: Ana iya ajiye kwalaye a kan katako ko kuma fale-falen fitarwa marasa feshi bisa ga girman birgima da buƙatun sarrafawa.

Lodawa a cikin kwantena: Yawan lodawa ya dogara da tsawon naɗin, girman kwali, tsarin pallet, nau'in kwantena da ƙa'idodin nauyi na doka.

Lokacin samar da kayayyaki: Umarni na yau da kullun yawanci suna buƙatar kimanin kwanaki 7-14 bayan an tabbatar da ƙira, ƙayyadaddun bayanai, samfuri, marufi da ajiya.

Takardun Bayanan Rufin PVC na Gypsum

Takardar bayanai da hanyoyin haɗin rahoton gwaji da aka bayar tare da shafin asali an ajiye su a ƙasa.

Kafin a buga, a tabbatar an loda fayilolin PDF guda biyu kuma sun shafi ainihin kauri, launi, tsari, tsari da wurin da aka ƙera su.

   Zazzage Takardar Bayanan Rufin PVC Gypsum

   Sauke Rahoton Gwajin Fim ɗin Rufin PVC Gypsum

Takaddun Shaida da Takardun Bin Dokoki

Takardun da ake da su na iya haɗawa da takamaiman samfura, takaddun bayanai na aminci, rahotannin abubuwan da aka takaita, rahotannin kadarorin jiki, rahotannin gwajin wuta da takaddun shaida na kula da inganci.

Ya kamata a bayyana SGS bisa ga ainihin gwajin da aka yi maimakon a gabatar da shi a matsayin takardar shaidar samfuri ta duniya baki ɗaya.

RoHS ya shafi ƙa'idodin hana haɗari a cikin kayan lantarki da na lantarki kuma bai kamata a yi amfani da shi azaman babban shaidar bin ƙa'idodin kayan gini ba.

ISO 9001 ma'aunin tsarin kula da inganci ne. Ba ya kafa harshen wuta, VOC, danshi, iska ta cikin gida ko aikin muhalli don fim ɗin PVC.

Ya kamata a duba mai takardar shaidar, wurin samarwa, bugu na yau da kullun, iyaka da lokacin inganci kafin a buga duk wani da'awar takardar shaidar.

Nunin Duniya na HSQY

Me Yasa Za Ka Zabi HSQY A Matsayin Mai Kaya Fim ɗin Rufin Gilashin PVC?

• An ƙera fim ɗin ado na PVC don lamination na rufin gypsum-tayil.

• Kauri na yau da kullun na kimanin 0.075mm.

• Faɗin millimita 1220 na yau da kullun da faɗin da aka keɓance.

• Nau'in tsawon birgima mai tsawon mita 500 da kuma tsarin birgima na musamman.

• Fiye da zane-zane 100 na fari, marmara, ƙarfe, hatsi na itace da kuma zane-zane masu ƙayatarwa.

• Manyan launuka masu sheƙi, matte, lu'u-lu'u, launuka masu sanyi da laushi.

• Daidaita tsari da tallafin haɓaka launi na musamman.

• Samfura don gwajin manne da layin lamination.

• Na musamman na takarda mai ƙunshe da ma'aunin birgima da kuma hanyoyin da za a bi.

• Duba inganci bisa ga samfuran da aka amince da su da ƙayyadaddun bayanai.

• Fitar da kwalaye, fale-falen kaya da tallafin jigilar kaya daga ƙasashen waje.

Kafin a samar da adadi mai yawa, HSQY ya ba da shawarar a gwada fim ɗin da aka zaɓa da ainihin allon gypsum na abokin ciniki, manne, kayan aikin laminating, zafin aiki, matsin lamba da saurin layi.

Tuntuɓi HSQY don Samfura da Farashi

Tambayoyin da Ake Yawan Yi Game da Fim ɗin Rufin PVC Gypsum

Menene fim ɗin rufin gypsum na PVC?

Fim ɗin PVC ne mai siriri da aka buga ko aka yi masa ado da shi wanda aka lulluɓe shi a kan tayal ko allunan rufin gypsum don samar da saman ado da ake iya gani.

Shin fim ɗin rufin gypsum na PVC iri ɗaya ne da fim ɗin rufin shimfiɗa?

A'a. An lulluɓe fim ɗin rufin gypsum a kan allo mai tauri. Ana dumama membrane ɗin rufin mai shimfiɗawa kuma yana da ƙarfi a cikin layukan kewaye ba tare da wani abu mai kama da gypsum-board ba.

An saka fim ɗin PVC kai tsaye a cikin rufin T-grid?

A'a. Da farko ana sanya fim ɗin a kan tayal ɗin rufin gypsum yayin ƙera shi. Sannan ana sanya tayal ɗin da aka gama a cikin tsarin T-grid mai jituwa.

Menene kauri na yau da kullun?

Kauri na yau da kullun na yau da kullun kusan 0.075mm ne, tare da takamaiman ƙayyadaddun bayanai da ake samu a kusa da kewayon 0.06-0.08mm.

Menene faɗin fim ɗin da aka saba gani?

Faɗin HSQY na yau da kullun shine 1220mm. Za a iya tattauna faɗin 1230mm da sauran faɗin da aka keɓance.

Menene tsawon mirgina na yau da kullun?

Tsawon naɗin da aka yi amfani da shi wajen naɗawa yana da kimanin mita 500, yayin da tsawon da aka saba da shi ya dogara da kauri, faɗi, core da kuma matsakaicin nauyin naɗawa.

Waɗanne ƙira na ado ne ake samu?

Zaɓuɓɓuka sun haɗa da fararen, lu'u-lu'u, marmara, hatsi na itace, dutse, zinariya, azurfa, fure, na geometric, zane-zanen da aka yi da embossed da kuma zane-zanen da aka ƙera musamman.

Shin HSQY zai iya daidaita tsarin abokin ciniki?

Eh. Abokan ciniki za su iya samar da samfurin zahiri, bayanin launi ko fayil ɗin ƙira don kimantawa ta fasaha da mafi ƙarancin oda.

Waɗanne kayan aikin saman suna samuwa?

Kammalawar da ake da su sun haɗa da kyawawan sheƙi, semi-gloss, matte, lu'u-lu'u, frosted da embossed textures.

Za a iya sanya fim ɗin PVC a kan allon fiber na ma'adinai?

Zai iya dacewa bayan an gwada saman allon, porosity, manne, buƙatun sauti da yanayin sarrafawa.

Za a iya yin laminate a kan allon siminti?

Eh, ana iya gwada alkalinity na saman, danshi, dacewar mannewa da kuma ƙarfin haɗin gwiwa na dogon lokaci.

Wane manne ya kamata a yi amfani da shi?

Ya kamata a zaɓi manne bisa ga tsarin PVC, saman allon, tsarin lamination, tsarin warkarwa da juriyar zafi da ake buƙata.

Za a iya yin laminate mai zafi a fim ɗin?

Eh. Ana iya amfani da lamination mai zafi bayan an tabbatar da ingancin fim ɗin, tawada, manne, zafin jiki, matsin lamba da saurin layi.

Za a iya yin laminate a kan fim ɗin sanyi?

Ana iya amfani da manne mai lamination mai jituwa bisa ga buƙatun tsaftacewa da samarwa.

Yadda za a hana wrinkles a lokacin lamination?

Sarrafa ƙarfin birgima, daidaita fim, faɗin allon, mannewa, matsin lamba a kan cinya, zafin jiki da saurin layi.

Ta yaya ake gwada ƙarfin haɗin PVC-to-gypsum?

Ana iya kimanta ƙarfin haɗin ta amfani da gwajin barewa ko mannewa da aka amince da shi bayan an daidaita shi da kyau da kuma bayan an fallasa shi ga zafi ko danshi.

Shin fim ɗin rufin PVC na gypsum ba ya hana ruwa shiga?

Fuskar PVC tana inganta juriyar danshi daga saman gaba, amma cikakken tayal ɗin rufi ba ya hana ruwa shiga ta atomatik. Dole ne a kuma tantance yanayin ƙasa, gefuna, bayan gida, manne da shigarwa.

Shin fim ɗin PVC yana hana wuta?

Bai kamata a bayyana shi a matsayin wanda ke hana wuta gaba ɗaya ba. Dole ne a sami goyon bayan aikin wuta ta hanyar rahoton gwaji da ya dace don ainihin fim ɗin ko cikakken ginin silinda.

Shin akwai samfurin hana harshen wuta?

Ana iya kimanta tsarin hana harshen wuta na musamman bisa ga ƙa'idar gwajin da ake buƙata, kauri, launi da kuma substrate.

Shin RoHS ya tabbatar da cewa fim ɗin kayan gini ne mai kyau ga muhalli?

A'a. RoHS ya fi damuwa da abubuwan da aka takaita a cikin kayan lantarki da na lantarki. Ayyukan gini na iya buƙatar takaddun VOC, REACH, harshen wuta, hayaki ko na cikin gida daban-daban.

Shin ISO 9001 takardar shaidar aiki ne ga samfura?

A'a. ISO 9001 yana da alaƙa da tsarin kula da inganci na ƙungiya kuma baya maye gurbin gwaje-gwajen da suka shafi samfura.

Za a iya tsaftace saman rufin PVC?

Galibi ana iya goge shi da kyalle mai laushi da kuma mai tsafta bayan an tabbatar da dacewa da sinadarai. Ya kamata a guji kushin da ke lalata fata da kuma sinadarai masu ƙarfi.

Za a iya amfani da fim ɗin rufin PVC a waje?

An yi nufin samfurin da aka saba amfani da shi don amfani da rufin ciki. Fuskantar waje yana buƙatar gwajin UV da juriya ga yanayi daban-daban.

Wane alkibla ya kamata a ƙayyade?

Tabbatar ko fuskar da aka buga ya kamata a yi mata rauni a ciki ko a waje bisa ga hanyar da aka shimfiɗa layin lamination.

Menene mafi ƙarancin adadin oda?

Nauyin MOQ na kimanin kilogiram 2000. Launuka na musamman, silinda na bugawa da kuma tsare-tsare na musamman na iya buƙatar adadi mai yawa.

Ana iya samun samfuran samfura?

Ana iya samun samfuran samfura da ƙananan na'urori na gwaji don gwajin bayyanar da lamination.

Menene lokacin samar da jagora?

Tsarin samarwa na yau da kullun yana buƙatar kimanin kwanaki 7-14 bayan an tabbatar da tsari, ƙayyadaddun bayanai, samfurin, marufi da ajiya.

Wane bayani ake buƙata don yin ƙiyasin farashi?

Bayar da kauri, faɗi, tsawon birgima, tsakiya, alkiblar lanƙwasa, tsari, substrate, manne, tsarin lamination, gwaje-gwajen da ake buƙata, adadi, shiryawa da inda za a je.

Sami Fa'idar Fim ɗin Rufin PVC na Musamman

Game da Ƙungiyar Roba ta HSQY

Kamfanin HSQY Plastic Group yana samar da fina-finan rufin PVC na gypsum, fina-finan PVC masu laushi, zanen PVC na ado, fina-finan PVC masu bugawa, zanen PET, zanen PP da kayan filastik na musamman ga abokan cinikin B2B na ƙasashen waje.

HSQY tana tallafawa masana'antun allon gypsum, masana'antun tayal ɗin rufi, kamfanonin lamination, masu shigo da kayan gini da masu rarrabawa tare da samfuran samfura, haɓaka ƙayyadaddun bayanai, samar da gwaji, duba inganci da kuma shirya kayan fitarwa.

Nemi Ƙimar da Samfura