250 Micron Transparent Rigide Pvc Mati sɛbɛn

250 Micron Transparent Rigid PVC Mati sɛbɛn

HSQY bɛ 250 micron transparent rigid PVC matte sɛbɛnfura min bɛ kɛ s dilan walasa ka sɛbɛnni kɛ, ka kɛsu foli kɛ, ka blister pakew, sɛbɛnw datugulanw, jago jiralanw, decorative overlays, privacy inserts ani plastiki fɛn wɛrɛw jiginna.

A janya jiralen ye mikron 250 ye, o bɛ bɛn milimɛtɛrɛ 0,25 ma walima milimɛtɛrɛ 9,8 ɲɔgɔn. O janya in bɛ balansi nafama di gɛlɛya, sɛgɛsɛgɛli, sɛbɛnni ani die-cutting baarakɛcogo ma pakew ni ja baarakɛcogo la.

Surface matte walima frosted bɛ dɔ bɔ reflections directes la ani ka yecogo nɔgɔlen dilan ka tɛmɛ polished clear PVC kan . Fɛn minnu bɛ kɛ ni nɛnɛ ye minnu ka nɔgɔn ani minnu ka gɛlɛn, olu bɛ se ka kɛ ka kɛɲɛ ni kɛnɛya, sisi, yeelen jɛnsɛnni ani danbe nɔ wajibiyalen ye.

sɛbɛnfura min bɛ kɛ hakɛ dantigɛlenw ye 700 × 1000mm, 750 × 1050mm, 915 × 1830mm ani 1220 × 2440mm ye. Hakɛ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, kuluw bonya, u kulɛriw, u sanfɛla cogoyaw ani u janya minnu bɛ bɔ milimɛtɛrɛ 0,06 ɲɔgɔn na ka se milimɛtɛrɛ 2 ma, olu bɛ se ka jateminɛ ka kɛɲɛ ni a dilanni fɛɛrɛ ye.

Nin fɛn in ye fɛn gɛlɛn ye walima fɛn gɛlɛn tilancɛ PVC sɛbɛnfura min bɛ kɛ . A man kan ka ɲagami ni filimu nɔgɔlen ye min dilannen don ni plastiki ye PVC min bɛ kɛ ridow, bɔrɔw, tabali datugulanw walima dakunw ye minnu bɛ se ka wuli.

A dafalen sɛgɛsɛgɛ HSQY PVC matte sɛbɛnfura min bɛ kɛ range ka ɲɛsin yɔrɔw, kulɛriw ani janya wɛrɛw ma.

Demand PVC Matte Sheet sɔngɔko    Aw bɛ 250 Micron Samples ɲini

250 Micron Transparent PVC Matte Sheet ye mun ye?

250 micron transparent PVC matte sɛbɛnfura min bɛ kɛ ye polivinili kuloridi fɛn gɛlɛn finman ye min ɲɛ ka dɔgɔn, a ɲɛ ka nɔgɔn walima a bɛ kɛ nɛnɛ ye.

A tɛ i n’a fɔ glossy clear PVC , min bɛ yeelen barikamaw bɔ, matte PVC bɛ yeelen jiralen jɛnsɛn ani ka yecogo nɔgɔlen di, min tɛ polisi ye.

sɛbɛnfura min bɛ kɛ bɛ to kɛnɛya la walima a bɛ yeelen bɔ, nka yecogo hakɛ tigitigi bɛ bɔ dugukolo sanfɛla gɛlɛya la, a sisi, a bonya, a kulɛri ani ni a fan kelen walima a fila bɛɛ ye matte ye.

Ni milimɛtɛrɛ 0,25 ye, a fɛn in ka gɛlɛn fo ka se pakew datugulan caman ma, finiw dacogo sɛbɛnnenw ani fɛnw folifɛnw k’a sɔrɔ a bɛ to ka wuli ka se ka die tigɛ, ka jate kɛ ani ka fɛn caman tigɛli kɛ.

Daɲɛ minnu ye matte PVC sɛbɛnfura min bɛ kɛ , frosted PVC sɛbɛnfura min bɛ kɛ , anti-glare PVC sɛbɛnfura min bɛ kɛ ani translucent PVC filimu ye, olu bɛ baara kɛ ni ɲɔgɔn ye tuma dɔw la. Sannikɛlaw ka kan ka kɛnɛya, sisi, kɛnɛya ani fɛn dilannen wajibiyalenw ɲɛfɔ sanni u ka u jigi da fɛn dilannen tɔgɔ dɔrɔn kan.

Transparent PVC Jaw minnu bɛ kɛ ni sɛbɛnfura ye

PVC Matte Sheet ka ɲɛfɔliw

A laban muɲuni, a bonya, a sisi, a yeelen, a ɲɛda gɛlɛya, a kulɛri, a fan furakɛlen, a sɛbɛnni kɛcogo ani a foroko dilanni ka kan ka dafa fɛn dilannen dɔ kɔnɔ min dabɔra.

Glossy ni Matte ni Frosted PVC sɛbɛnfura

Daɲɛ minnu ye matte ni frosted ye olu tɛ diɲɛ bɛɛ ka ɲɛnayeli nafa dɔ ɲɛfɔ. Porozɛ minnu bɛ yecogo kɔrɔsilen wajibiya, olu ka kan ka kɛnɛya, sisi, yeelen cicogo ani farikolo tacogo dɔ ɲɛfɔ min dabɔra.

Mun na an bɛ 250 Micron PVC Matte Sheet sugandi?

Balanced Rigidité ani Flexibilité

0,25mm sɛbɛnfura min bɛ kɛ ka gɛlɛn fo ka se datugulan caman, kɛsu, sɛbɛnw ani datugulan caman ma nka a bɛ to ka nɔgɔya ka jate, ka foli ani ka sa tigɛ ka tɛmɛ panɛri gɛlɛn belebeleba kan.

Surface Reflection (Surface Reflection) Dɔgɔyara

Matte fini bɛ dɔ bɔ yeelen tilennen na ka bɔ sanfɛla yeelenw na, feerekɛyɔrɔ yeelenw na ani kamera yeelenw na.

Fɛn dilannenw jiracogo nɔgɔlen

Frosted transparency bɛ yecogo nɔgɔlen ni premium dilan ka tɛmɛ pake jɛlen jɛlenw kan minnu polisilen don kosɛbɛ.

Surface de imprimerie pratique

Printing-grade matte PVC bɛ se ka enki nɔrɔli kɔlɔsilen di kartiw, taamasiyɛnw, datugulanw, pakew ani laselifɛnw ma.

Yɛlɛma nɔgɔyalen

Kalanso bɛnnenw bɛ se ka tigɛ, sɛbɛnfura min bɛ kɛ ed, punched, die cut, scored, folded, bonded ani thermoformed.

PVC Mati sɛbɛn min bɛ kɛ ka sɛbɛnni kɛ

Transparent matte PVC bɛ kɛ ka sɛbɛnw dabɔ, ka fɛnw laseli kartiw, tɔndenw ka kartiw, menuw, sɛbɛnw datugulanw, pakew, labeliw ani feerekɛyɔrɔw jiracogo.

Koronawirisi furakɛli walima primer bɛ se ka kɛ tintiri dɔw la. Sannikɛlaw ka kan ka sɛbɛnnikɛlan modɛli, enki chimie, dina hakɛ wajibiyalen, fan furakɛlen ani a mara waati makɔnɔnen di sani u ka sɛbɛnni kɛ.

Farikoloɲɛnajɛ kɛcogo misali ka kan ka sɛgɛsɛgɛ ni a nɔrɔlen don, ni a kulɛri bɛ bɔ, ni a kɛnɛyara, ni a tɛ se ka sɔgɔsɔgɔ ani ni a dabɔra sɛbɛnni kɔfɛ sani a ka kɛ caman ye.

PVC Mati sɛbɛn min bɛ kɛ ka kɛsu foli kɛ

Mikɔrɔn 250 matte PVC sɛbɛnfura min bɛ kɛ bɛ se ka wuli ka kɛ kartɔnw ye minnu bɛ se ka wuli walima minnu bɛ yeelen bɔ, bolokɔniw, jirali kɛsu ani pakew finɛtiriw.

• Kosmɛtiki ni mɔgɔ yɛrɛ ladonni foroko.

• Tulonkɛfɛnw, sɛbɛnnikɛlanw ani kadow foroko.

• Elektɔriki-kɛsu minnu bɛ kɛ ni fɛnw ye.

• Laseli-fɛnw foroko.

• Bolo masirilenw ani finɛtiriw minnu bɛ yeelen bɔ.

• Kartɔnw foli sɛbɛnnenw ni fɛn yetaw matte.

Folding-box-grade PVC ka kan ka sɛgɛsɛgɛ ni die tigɛcogo, scoring, crease whitening, cracking, glue adhesion ani automatique box-forming performance ye.

PVC Matte Sheet ka ɲɛsin Blister Packaging ma

Thermoforming-grade matte PVC bɛ se ka dilan ka kɛ kurukuruw datugulanw ye, sanubɔlanw , ka fɛnw don a kɔnɔ ani ka u jira ni fɛnw dilanni ni u dilanni cogoyaw bɛ bɛn ɲɔgɔn ma ka ɲɛ.

Surface matte bɛ se ka dɔ bɔ fɛn dilannenw yecogo tilennen na ni i y’a suma ni PVC jɛlen polisilen ye. A bɛnnen don kosɛbɛ pakew ma minnu bɛ a ɲini ka kɛ fɛn ye min bɛ jɛnsɛn, min bɛ masiri walima min bɛ yeelen dɔgɔya.

Foroko funteni, dingɛ kɔnɔna juguya, nkɔni janya, mɔbili dilanni, funteni cogoya ani kogo dafalen janya fitinin ka kan ka tiɲɛ ni kiliyan ka minɛn lakikaw ye.

Kunnafoni dogolenw, tilali ani masirifɛnw

Frosted PVC bɛ se ka kɛ i n’a fɔ gundolafɛn nɔgɔman walima ka jɛnsɛnni kɛ yɔrɔw la minnu bɛ kɛ karamɔgɔya la, jiralanw, yeelenbɔlanw ani masirifɛnw lajɛlenw na.

Mikɔrɔn 250 sɛbɛnfura min bɛ kɛ a ka c’a la, a man bon walima a man gɛlɛn fo ka se ka baara kɛ i n’a fɔ fɛn dilanni tilayɔrɔ min bɛ a yɛrɛ dɛmɛ.

A ka kan ka sigi karamɔgɔya la, ka lamini ni fɛn wɛrɛ ye walima ka kɛ fɛn ye min bɛ don a kɔnɔ. A ka c’a la, jɔli tilayɔrɔw bɛ PVC , akiriliki, PETG walima polikarbonati panɛli dɔ de wajibiya min ka bon kosɛbɛ.

Matte PVC ni Matte PET ani Matte PP

Baara kɛli ni so kɔnɔ ani kɛnɛma

Standard transparent rigid PVC matte sɛbɛnfura min bɛ kɛ bɛ fɔ fɔlɔ so kɔnɔ sɛbɛnni, pakew, sɛbɛnnikɛlanw, jiralanw ani masirifɛnw na.

Ni aw bɛ tile yeelen ni kɛnɛma waati jan kɛ, o bɛ se ka kɛ sababu ye ka a jɛ, ka a tunun, ka a kari, ka a ɲɛda cogoya Changer walima ka masin baara bɔnɛ.

Kɛnɛma porozɛw ka kan ka furakɛlicogo dɔ ɲɛfɔ min bɛ sabati ni UV ye, a tali kuntaala makɔnɔnen, waati cogoya, a kulɛri, a sigicogo ani waati sɛgɛsɛgɛli wajibiyalen.

Standard PVC man kan ka feere a yɛrɛma i n’a fɔ a bɛ se ka waati kunbɛn kudayi walima a tɛ jɛ.

Dumuni, furakɛli ani baarakɛcogo minnu bɛ kɛ ni sariya ye

Standard matte PVC sɛbɛnfura min bɛ kɛ man kan ka fɔ a yɛrɛma ko a bɛnnen don dumuniko siratigɛ la, furaw foroko walima furakɛli-minɛnw tali ma.

A bɛnnenya bɛ bɔ PVC resin, stabilisateur, lubricant, processus aid, impact modifier, pigment, recycled content ani manufacturing controls la minnu bɛ kɛ ka fɛn tigitigi dilan.

Sannikɛla minnu bɛ fɛnw ɲini minnu bɛ sariya kɔnɔ, olu ka kan ka taa sugu jira, u kɛcogo, u ka ɲɔgɔn sɔrɔcogo, u ka sɛgɛsɛgɛli kɛcogo wajibiyalen ani u ka sɛbɛnw sani u ka komandi kɛ.

RoHS, REACH, SGS sɛgɛsɛgɛli rapɔɔriw ani ISO ɲɛnabɔli-sisɛti seereyaw ka seko tɛ kelen ye, wa u tɛ dumuniko walima furakɛli sariya labatoli sigi sen kan u yɛrɛma.

Tasuma baarakɛcogo ni baarakɛcogo lakanani

Transparent PVC matte sɛbɛnfura min bɛ kɛ man kan ka ɲɛfɔ caman na ko tasuma tɛ se ka don a la.

Tasuma baara bɛ bɔ a dilanni na, a bonya la, a sɛgɛsɛgɛli sira fɛ, a labɛncogo la ani tasuma-sɛgɛsɛgɛli fɛɛrɛ sugandilen.

Tasuma-fagalan hakɛ ka kan ka fɔ dɔrɔn ni kunnafoni sɛbɛn min bɛ se ka kɛ, o bɛ fɛn dilannen hakɛ ni a janya tigitigi ɲɛfɔ.

A ka c’a la, laser tigɛ PVC man ɲi barisa funteni tiɲɛni bɛ se ka sisi sɔgɔlenw bɔ, kulori bɛ minnu na, minnu bɛ se ka kojugu kɛ baarakɛlaw ni minɛnw na.

A ka c’a la, masinw tigɛcogo, die tigɛcogo, punching ani routing de ka fisa fo ni PVC -baarakɛminɛn kɛrɛnkɛrɛnnenw ni bɔli siraw bɛ yen.

Tekniki Donanw ka sɛbɛnw

Fɛɛrɛsɛbɛn minnu bɛ sɔrɔ, olu telesarse jukɔrɔ. Aw bɛ a sɛgɛsɛgɛ ko sɛbɛn kelen-kelen bɛɛ bɛ tali kɛ matte yɔrɔ tigitigi la, a bonya, a dilanni, a kulɛri ani a dilanni kulu min bɛ sɔrɔ komandi kɔnɔ.

   PVC sɛbɛn jɛlen Donanw ka sɛbɛn telesarse

   PVC sɛbɛnfura Kɔrɔbɔli Raporo telesarse

Sɛgɛsɛgɛli minnu bɛ kɛ ka ɲɛsin jogoɲumanya kɔlɔsili ma

• Materiel raw-material ani formulation sɛgɛsɛgɛli.

• A bonya ni a bonya muɲuni.

• Sheet walima roll bonya, a janya ani a tigɛcogo muɲuni.

• Kɛrɛnkɛrɛnnenya ni yeelen-cikan-ɲɔgɔnna.

• Haze, gloss ani surface-roughness consistance.

• Natural-clear walima blue-tint kulɛri bɛ kɛ cogo min na.

• Kurukuruw, nɔgɔ nɛrɛmaw, jeliw, jɛgɛ ɲɛw ani nɔgɔw.

• Sheet flatness, curl ani edge quality.

• Surface-treatment ani dyne-level sɛgɛsɛgɛli.

• Enki nɔrɔli, kɛnɛyali ani sɔgɔsɔgɔninjɛ kunbɛnni.

• Die-cutting, punching ani scoring kɛcogo.

• Crease whitening ani folding-crack resistance.

• Thermoforming ani mold-release baarakɛcogo yɔrɔ minnu na a mago bɛ a la.

• Adhesif, soudure ani lamination bɛnkan.

• Filimu lakanani, labeliw ani export-packaging sɛgɛsɛgɛli.

Custom PVC Matte Sheet Sugandili

• A bɛ jira ko 250 micron / 0,25mm janya.

• A janya bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye ka bɔ 0,06mm ɲɔgɔn na ka se 2mm ma.

• sɛbɛnfura min bɛ kɛ hakɛw dantigɛlenw ani minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Master rolls, slit rolls ani fla sɛbɛnfura min bɛ kɛ s.

• Natural clear, blue-tint, transparent colored ani opaque kulɛriw.

• Matte finmanw, frosted light ani frosted gɛlɛnw yɔrɔw.

• Mate/matte ani matte/glossy surface faralen ɲɔgɔn kan.

• Sɛbɛnni, foli-kɛsu, blister ani binding-cover grades.

• Corona furakɛli, primer ani antistatique suganditaw.

• Filimu min bɛ mɔgɔ tanga ani sɛbɛnni minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Npogotiginin-fɛnw ani furakɛlicogo sugandilenw minnu bɛ kɛ ka segin u cogo kɔrɔ la.

• A4 sɛbɛnfura min bɛ kɛ s ani danma roll samples ka sɛgɛsɛgɛli kɛ.

PVC Matte Sheet Baarakɛcogo

• Sɛbɛnni: Kartiw, dakunw, dumunifɛnw, dakunw, taamasiyɛnw ani fɛnw laseli.

• Box folilenw: Kosmɛtiki, kado, tulonkɛfɛnw, sɛbɛnnikɛlan ani ɛntɛrinɛti-minɛnw foroko.

• Blister packaging (Blister packaging): Foroko dilannenw ni a ɲɛ bɛ dɔgɔya walima a ɲɛda masirilen don.

• Dakunw sirili: Rapport matte ani frosted, gafe ani jiracogo datugulanw.

• Fiyeere jiralanw: Fɛn minnu bɛ don fɛnw na minnu bɛ masiri, difiyɛriw, ja sɛbɛnnenw ani feerekɛyɔrɔ yɔrɔw.

• Privacy layers: Inserts framed lightweight ani films decoratives translucents.

• DIY ni modɛli dilanni: Masirifɛnw tigɛlen, foli ani sirilen.

Packing ani Delivery

Misaliw pakew : A4 sɛbɛnfura min bɛ kɛ s ani misali tigɛlenw minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka lakana ni PE bɔrɔw ye, papiye walima kartɔnw.

Sɛbɛn pakew : sɛbɛnfura min bɛ kɛ s fla bɛ se ka siri ni PE filimu ye, kraft papier walima lakanani pakew ka kɛɲɛ ni dugukolo sanfɛla wajibiyalenw ye.

Kurukuruw pake: Kurukuruw bɛ se ka siri ni lakanani filimu ni kraft papier ye ka u siri palɛtiw kan.

Palɛti pake : Kilo 500-2000 ɲɔgɔn bɛ se ka pake plywood palɛti kan ka kɛɲɛ ni a bonya, a bonya ani a minɛcogo wajibiyalenw ye.

Konteyna doni : Reference doni bɛ se tɔni 20 ma, ka kɛɲɛ ni palɛti cogoya ye, a hakɛ ani a girinya dan ye sariya siratigɛ la.

Waati min bɛ kɛ : A ka c’a la, a dilanni bɛ kɛ tile 7-15 ɲɔgɔn na, a ɲɛfɔcogo, a hakɛ, a pakew ani a sarali dafalen kɔfɛ.

Lasecogo sariyaw: EXW, FOB, CNF, DDU ani jagokɛcogo wɛrɛw bɛnna minnu kan, olu bɛ sɔrɔ.

Kunnafoni minnu ka kan ka kɛ walasa ka Quotation sɔrɔ

• A ka kan ka kɛ ka a janya ni a bonya muɲu.

• Sheet dimensions walima roll bonya.

• Natural clear, blue-tint walima kulɛri min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Matte fin, frosted light walima frosted girinman yɔrɔ.

• Mati bɛ kɛ fan kelen fɛ walima a fan fila bɛɛ la.

• Gloss, haze walima light transmission wajibiyalen don.

• Sɛbɛnni, foli-kɛsu, blister, datugulan walima finimugu kɛcogo.

• Imprimante, encre, adhesive, moule walima convertisseur-machine kunnafoniw.

• Corona-furakɛli, primer walima dyne-nivo wajibiyalen.

• Npogotiginin walima fɛn minnu bɛ segin ka kɛ fɛn wɛrɛw ye, olu wajibiyalen don.

• Filimu lakanani ni taamasiyɛnw wajibiyalenw.

• Rapports wajibiyalenw walima sariya labatoli sɛbɛnw.

• Kɔrɔbɔli hakɛ, fɔlɔfɔlɔ ani san hakɛ jateminɛlen.

• Destination port ani delivery don min wajibiyalen don.

Aw ka PVC Matte Sheet wajibiyalenw ci

Mun na i bɛ HSQY sugandi ka kɛ i ka PVC Matte Sheet feerela ye?

• 250 mikron transparent matte PVC sɛbɛnfura min bɛ kɛ bɔli.

• A janya bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye ka bɔ 0,06mm ɲɔgɔn na ka se 2mm ma.

• sɛbɛnfura min bɛ kɛ walima roll dimensions standard ani customized.

• Fine matte, frosted ani anti-glare surface sugandilenw.

• Sɛbɛnni, foli-kɛsu, blister ani overlay grades.

• Kulɛriw bɔli jɛlen, tintin ani ka kɛɲɛ ni mɔgɔw sago ye.

• Surface furakɛli ani protective-film suganditaw.

• Misaliw ye sɛbɛnni, foli ani foroko kɔrɔbɔliw ye.

• Fɛɛrɛ-sɛbɛnni ni jogo-sɛgɛsɛgɛli dɛmɛni.

• Forobaciyɛn bɔli jamana wɛrɛw la ani dɛmɛ min bɛ don jamana wɛrɛw la ka taa jamana wɛrɛw la.

Sani u ka fɛn caman dilan, HSQY b’a ɲini ka sɛbɛnfura min bɛ kɛ sugandilen kɔrɔbɔ ni kiliyan ka sɛbɛnnikɛlan yɛrɛ ye, ni die-cutting baarakɛminɛn ye, ni folikɛlan ye, ni nɔrɔlan ye, ni blister mold ye walima ni fɛn dilanni minɛnw ye.

Aw ye HSQY lajɛ walasa ka misaliw ni sɔngɔko dɔn

Ɲininkali minnu bɛ kɛ tuma caman na 250 Micron PVC Matte Sheet kan

250 mikron transparent PVC matte sɛbɛnfura min bɛ kɛ ye mun ye ?

O ye 0,25mm gɛlɛn walima tilancɛ gɛlɛn ye min bɛ kɛnɛya PVC sɛbɛnfura min bɛ kɛ ni a ɲɛda tɛ kɛnɛya, a bɛ kɛ ni fɛn ye walima a bɛ kɛ ni nɛnɛ ye.

250 mikron PVC janya ye joli ye ?

A janya ye mikron 250 ye, o bɛ bɛn milimɛtɛrɛ 0,25 ma walima milimɛtɛrɛ 9,8 ɲɔgɔn.

Yala mikron 250 PVC ye fɛn gɛlɛn ye wa?

Awɔ. PVC furakɛcogo gɛlɛn bɛ gɛlɛya nafama di, hali ni 0,25mm sɛbɛnfura min bɛ kɛ bɛ to ka wuli ka se ka kuru, ka kuru ani ka foli.

Danfara jumɛn bɛ matte ni frosted PVC cɛ ?

A ka c’a la, matɛri bɛ yɔrɔ dɔ ɲɛfɔ min ɲɛ ka dɔgɔn. A ka c’a la, frosted bɛ ɲɛfɔli kɛ fɛn dɔ kan min bɛ jɛnsɛn kosɛbɛ ni sisi bɛ caya. Yecogo lakika ka kan ka ɲɛfɔ ni misali ye walima ni ɲɛnayeli nafaw ye.

Yala matte PVC bɛ kɛnɛya pewu wa?

A bɛ to kɛnɛya la walima a bɛ yeelen bɔ, nka a ɲɛda cogoya bɛ dɔ bɔ jɛya tilennen na. Yɔrɔ minnu ka gɛlɛn ni nɛnɛ ye, olu bɛ yecogo jɛnsɛnni caman kɛ.

Yala fan fila bɛɛ bɛ se ka kɛ matte ye wa?

Mate/matte ani matte/glossy surface faralenw bɛ se ka jateminɛ ka kɛɲɛ ni a dilanni kɛcogo n’a hakɛ ye.

Yala transparent PVC matte sɛbɛnfura min bɛ kɛ bɛ se ka sɛbɛn wa?

Awɔ. Printing-grade material bɛ se ka offset, screen ani UV printing dɛmɛ, ink, surface ani curing bɛnkan kɔrɔbɔlen kɔfɛ.

Yala PVC bɛ korona furakɛli de wajibiya sɛbɛnni kama wa?

Encre dɔw mako bɛ corona furakɛli walima primer. Sannikɛlaw ka kan ka dyne hakɛ wajibiyalen fɔ ani fan furakɛlen.

Yala mikron 250 PVC bɛ se ka kɛ ka kɛsu foli kɛ wa?

Awɔ. Foli-kɛsu hakɛ bɛnnenw bɛ se ka tigɛ ka sa, ka jate kɛ, ka foli kɛ ani ka siri ka kɛ kartɔn jɛlenw ye minnu ka nɔgɔn walima minnu bɛ kɛ ni nɛnɛ ye.

Yala PVC matte sɛbɛnfura min bɛ kɛ bɛ se ka kɛ thermoformé ye wa?

Furakɛcogo min bɛ se ka kɛ ni funteni ye, o bɛ se ka kɛ ni vacuum ye walima ka kɛ ni funteni ye. Funteni cogoyaw ni kogo dafalenw janya ka kan ka sɛgɛsɛgɛ.

Yala a bɛ se ka kɛ kurukuruw foroko ye wa?

Awɔ. Matte blister-grade PVC bɛ se ka kɛ ni ɲɛnayeli dɔgɔyara walima ni ɲɛnayeli kɛcogo jɛnsɛnnen ka kan ka kɛ.

Yala 0,25mm PVC bɛnnen don fɛn dilanni tilali ma wa?

A ka dɔgɔ kojugu fo a tɛ Se ka baara Kɛ i n’a fɔ yɛrɛ-dɛmɛ-yɔrɔ. A bɛ se ka kɛ i n’a fɔ danbe donta min bɛ kɛ karamɔgɔya la, diffuser walima laminated decorative layer.

Yala sɛbɛnfura min bɛ kɛ bɛ se ka kɛ ka datugulanw siri wa?

Awɔ. 250 micron matte sɛbɛnfura min bɛ kɛ bɛ datugulan gɛlɛn di, min ɲɛ bɛ dɔgɔya, ka ɲɛsin rapɔɔriw, jiracogo, gafew ani gafesɛbɛnw ma.

Yala kulɛri bɛ se ka kɛ ka kɛɲɛ ni i yɛrɛ sago ye wa?

Awɔ. Kulɛri jɛlenw, minnu ɲɛ ye bulu ye, minnu kulɛri jɛlen don, minnu bɛ yeelen bɔ ani minnu tɛ ye, olu bɛ se ka jateminɛ.

sɛbɛnfura min bɛ kɛ hakɛ jumɛnw bɛ sɔrɔ?

A hakɛ dantigɛlenw ye 700 × 1000mm, 750 × 1050mm, 915 × 1830mm ani 1220 × 2440mm ye. Hakɛ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ sɔrɔ.

Yala o fɛnw bɛ se ka dilan sɛbɛnfura kɔnɔ wa?

Fɛnɲɛnɛmafagalan finmanw bɛ se ka dilan i n’a fɔ master walima slit rolls ni u bonya, u cɛmancɛ, u kɔnɔna ani u ka gɛlɛya bɛnnen don.

Yala transparent PVC matte sɛbɛnfura min bɛ kɛ bɛ se ka waati kunbɛn wa?

Fɛn minnu bɛ kɛ ka kɛɲɛ ni sariya ye, olu dabɔra fɔlɔ baara kama so kɔnɔ. Kɛnɛma baarakɛcogo bɛ UV-stabilized grade ani baarakɛcogo kɛrɛnkɛrɛnnen waati jateminɛni de wajibiya.

Yala PVC matte sɛbɛnfura min bɛ kɛ dumuni ye farati ye wa?

Standard PVC matte sɛbɛnfura min bɛ kɛ man kan ka kɛ a yɛrɛma dumuni na. Furakɛcogo min bɛ se ka kɛ ani yɔrɔ min bɛ taa sugu la, o sɛbɛnw de wajibiyalen don.

Yala sɛbɛnfura min bɛ kɛ ye sigida lakanani ye wa?

Laminiko caman fɔli man kan ka kɛ ni daliluw tɛ minnu bɛ u sinsin. Lamini baarakɛcogo bɛ bɔ furakɛlicogo la, a kɔnɔfɛnw lasegincogo, a dilanni, a dilanni na ani sigida nɔgɔko ɲɛnabɔli fɛɛrɛw.

Yala PVC matte sɛbɛnfura min bɛ kɛ gɛlɛn bɛ se ka segin ka kɛ fɛn wɛrɛ ye wa?

PVC bɛ se ka kɛ fɛn ye min bɛ se ka segin ka kɛ fɛn wɛrɛ ye fɛɛrɛko siratigɛ la, nka seginkanni lakika bɛ bɔ sigida lajɛ, a tilali, a sɛbɛnni, a nɔrɔlenw, a dacogo ani a nɔgɔli la.

Yala PVC min bɛ segin ka kɛ fɛn wɛrɛ ye, o bɛ se ka kɛ wa?

Fɛn minnu bɛ kɛ ka segin ka kɛ fɛn wɛrɛw ye, olu sugandilenw bɛ se ka sɔrɔ, nka fɛn minnu bɛ segin ka kɛ fɛn wɛrɛw ye, olu bɛ se ka nɔ bila kɛnɛya la, kulɛri la, nɔgɔw la, sɛbɛnni kɛcogo la ani u dilanni na.

Yala PVC matte sɛbɛnfura min bɛ kɛ bɛ se ka laser tigɛ wa?

A ka ca a la, laser tigɛcogo kɔrɔ man ɲi barisa PVC min sumana, o bɛ se ka sisiw bɔ minnu bɛ se ka tiɲɛ, kulori bɛ minnu na. A ka c’a la, masinw tigɛcogo walima die tigɛcogo de ka fisa.

Koman hakɛ fitinin ye mun ye?

MOQ sariyalen bɛ kilo 1000 ɲɔgɔn bɔ. Kulɛriw, fɛn dilannenw, furakɛlicogo ani hakɛ minnu tɛ kɛ ka caya, olu bɛ se ka kɛ sababu ye ka hakɛ wɛrɛ de wajibiya.

Yala misaliw bɛ sɔrɔ fu wa?

Stock samples bɛ se ka sɔrɔ walasa ka a janya, a sisi, a kɛcogo, a sɛbɛnni ani a foli lajɛ. A ka c’a la, doni bɛ sara sannikɛla fɛ.

A dilanni ɲɛminɛ waati ye mun ye?

A ka c’a la, sɛnɛcogo jɔnjɔn bɛ tile 7-15 ɲɔgɔn ta, a ɲɛfɔli, a hakɛ, a foroko ani a sarali dafalen kɔfɛ.

Kunnafoni jumɛnw de ka kan ka kɛ walasa ka quotation sɔrɔ?

Aw bɛ a bonya, a bonya, a kulɛri, a nivo matte, a kɛcogo, a sɛbɛnni walima a dilanni taabolo, a hakɛ, a foroko, a taayɔrɔ ani a ka kunnafoniw di minnu wajibiyalen don.

Aw ye Custom PVC Matte Sheet Quote sɔrɔ

HSQY Plastic Group ko la

Changzhou Huisu Qinye Plastic Group Co., Ltd. bɛ PVC sɛbɛnfura min bɛ kɛ s, matte PVC sɛbɛnfura min bɛ kɛ s, sɛbɛnnikɛlan sɛbɛnfura min bɛ kɛ s, sirili datugulanw, pakew filimuw ani plastiki fɛn wɛrɛw di diɲɛ B2B kuntigiw ma minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

HSQY bɛ sɛbɛnnikɛlanw, pakew tigɛlikɛlaw, foli-kɛsu dilannikɛlaw, thermoforming sosiyetew, sɛbɛnnikɛlanw feerelaw, fɛnw donbagaw ani u feerelaw dɛmɛ ni misali jateminɛ ye, ka fɛn dilanni kɛ ka kɛɲɛ ni mɔgɔw sago ye, ka jogo sɛgɛsɛgɛ ani ka pakew bila ka taa jamana wɛrɛw la.

Aw ye sɔngɔko sɛbɛn ɲini ani Sample