HSQY 0,5mm 1mm Polikarbonati finman dilancogo sɛbɛn

0,5mm ani 1mm Polikarbonati finman dilancogo sɛbɛn

HSQY bɛ polikarbonati difiyɛri finmanw ni opal dilan ka ɲɛsin LED panneau lanpanw ma, yeelenbɔlanw, dugumalanw, plafond yeelenw, biro yeelenw, dumunikɛyɔrɔ yeelenw, piblisite yeelenbɔlanw, taamasiyɛnw yeelenlenw ani kɔkanna yeelenw.

A janya jiralenw ye 0,5mm ani 1mm ye. Janya wɛrɛw bɛ sɔrɔ ka bɔ milimɛtɛrɛ 0,5 ɲɔgɔn na ka se milimɛtɛrɛ 12 ma, yeelenbɔlanw, difiyɛri pannew, yeelen datugulanw dilannenw ani yeelenbɔlanw minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

Optique options standards bɛ yeelen yelen cili 82%–88% ɲɔgɔn di ani 90%–94% ɲɔgɔnna sisi. O nafaw ka kan ka dafa ka ɲɛsin a janya tigitigi ma, a kulɛri, a ɲɛda cogoya, a jɛnsɛnni kɛcogo ani a sɛgɛsɛgɛli kɛcogo min bɛ sɔrɔ o la.

Polikarɔbɔnati bɛ yeelen-sɛnɛ baarakɛcogo ni bɔgɔdaga nafama, hakɛ sabatili ani funteni-kɛlɛli fara ɲɔgɔn kan, o b’a to a bɛnnen don yeelenbɔlanw ma minnu bɛ muɲu kosɛbɛ ka tɛmɛ polisitirini walima akiriliki jɛnsɛnni panɛriw kan minnu bɛ kɛ cogoya la.

Yɔrɔ minnu bɛ sɔrɔ, olu ye matte/matte ani glossy/matte ye. Opal finman ye sariya ye, k’a sɔrɔ tonw finman minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, diffusion hakɛw, yeelen-ci hakɛ, kulɛriw, hakɛw ani surface textures bɛ se ka jateminɛ ka kɛɲɛ ni komandi caman ye.

Hotspot-dogo baara laban bɛ bɔ yeelen dilanni dafalen na, i n’a fɔ LED yɔrɔjan, difuser-to-LED janya, LED fanga, reflecteur dilancogo, panneau thickness, transmission, haze ani surface structure.

A dafalen sɛgɛsɛgɛ HSQY polikarbonati diffuser sheet range ani farankan polikarbonati sɛbɛnfura minnu bɛ sɔrɔ.

Diffuser Sheet Pricing ɲini    Aw ye Échantillons Optiques ɲini

Polikarbonati Difuser Sheet Wideyo

Aw ye wideyo lajɛ min bɛ duguma walasa ka kunnafoni caman sɔrɔ HSQY polikarbonati difiyɛri sɛbɛnw kan, u janya minnu bɛ sɔrɔ, u ɲɛnayeli kɛcogo, u sanfɛla suganditaw ani LED-yeelen baarakɛcogo.

Polikarbonati jɛnsɛnni sɛbɛn ye mun ye?

Polikarbonati difiyɛri sɛbɛn ye yeelenbɔlan ye min bɛ yeelen bɔ, min dilannen don walasa ka yeelen jɛnsɛn min bɛ tɛmɛ sɛbɛnfura kɔnɔ.

Diffusion effect bɛ LED point sources concentrés walima linear light sources caman tigɛli kɛ ka kɛ yeelen yɔrɔ ye min ka nɔgɔn ani min bɛ kɛ kelen ye.

Yeelen jɛnsɛnni bɛ se ka kɛ ni ɲɛnayeli difiyɛri fɛnɲɛnamafagalanw farali ye polikarbonati resin kan, ka yɔrɔ dɔ kɛ min bɛ kɛ ni fɛn ye walima ka kɔnɔna jɛnsɛnni ni yɔrɔ sɔgɔlen fara ɲɔgɔn kan.

Kɔnɔna jɛnsɛnni bɛ dɛmɛ ka yeelen jɛnsɛn fɛn bɛɛ la. Mati walima frosted surface textures bɛ dɔ bɔ ka taa a fɛ reflection ani ka panneau yeelenma cogoya ɲɛ.

Polikarbonati difiyɛri sɛbɛnw ka teli ka kɛ opal finman ye walima u bɛ yeelen bɔ sanni u ka kɛ fɛn jɛlen ye. U kun tɛ ka yecogo jɛlen di sɛbɛnfura fɛ, nka ka yeelen, jɛnsɛnni ani LED dogo fanga balansi.

Daɲɛ minnu ye PC diffuser sheet, LED diffuser panel, polycarbonate lighting lens, opal PC sheet ani light-diffusing polycarbonate sheet ye, olu bɛ fɔ tuma caman na fɛnw na minnu bɛ tali kɛ ɲɔgɔn na.

Polikarbonati Difuser Sheet Jaw

Polikarbonati Diffuser sɛbɛn ɲɛnamaw

Yeelen tali ni sisi ka kan ka sɛgɛsɛgɛ ɲɔgɔn fɛ fɛn dilanni sɛbɛn tigitigi kan. Nafa min sumanlen don milimɛtɛrɛ 0,5 sɛbɛn kan, o man kan ka kɛ a yɛrɛma milimɛtɛrɛ 1, milimɛtɛrɛ 3 walima milimɛtɛrɛ 12 sɛbɛn kan.

Yeelen Tɛmɛsira, Haze ani Diffusion faamuyali

Yeelen Lasecogo

Yeelen cili bɛ yeelen yelen hakɛ jira min bɛ tɛmɛ difiyɛri sɛbɛn fɛ.

Ni fɛnw jiginni ka bon, o bɛ se ka yeelenbɔlanw ka baarakɛcogo ɲɛ, nka ni cikan tɛmɛna ni a ma jɛnsɛn ka ɲɛ, o bɛ se ka LED yɔrɔ kelen-kelen bɛɛ to yen.

Bugun

Haze bɛ yeelen min bɛ ci, o hakɛ suman min bɛ jɛnsɛn ka bɔ a yɔrɔ fɔlɔ la.

A ka c’a la, sisiba bɛ yecogo nɔgɔlen bɔ ani ka yecogo tilennen dɔgɔya sɛbɛnfura fɛ, nka sisi dɔrɔn tɛ LED dogo fanga walima yeelen kelen-kelen ɲɛfɔ ka ɲɛ.

Diffusion ani Dogo fanga

Diffusion (janya) bɛ a ɲɛfɔ cogo min na yeelen bɛ segin ka tila-tila cogo min na ka caya ani ka kɛ kelen ye yeelen yɔrɔ la.

Se dogolen bɛ sɛbɛn in seko ɲɛfɔ ka LED yɔrɔw yetaw, layini jɛlenw ani yeelen caman ɲɔgɔnna dogo.

Kulɛri ni Ton Fin

Diffuseur formulation bɛ se ka nɔ bila LED yeelen min bɛ ci, o kulɛri funteni ni kulɛri coordinates yelenw na.

Yeelen porozɛ minnu ka kulɛri wajibiyalen don kosɛbɛ, olu ka kan ka difiyɛri kɔrɔbɔ ni LED spektrum yɛrɛ ye ani ka yeelenbɔlan dafalen suman sanni ka sɛbɛnfura jateminɛ lamini yeelen dɔrɔn kɔrɔ.

Diffusion Nivo ɲuman sugandicogo

LED ka yɔrɔjan ani Diffuser yɔrɔjan

Difiyɛri sɛbɛn tɛ se ka sugandi ni yeelenbɔlan ni sisi dɔrɔn ye.

LED board ni diffuseur cɛ janya bɛ nɔ bila ni LED yɔrɔ kelen-kelen bɛɛ bɛ to ka ye.

A ka c’a la, ɲɛnayeli yɔrɔjanba bɛ a to yeelen min bɛ bɔ LED kɛrɛfɛtaw la ka ɲɔgɔn dafa sani a ka se difiyɛri ma, o bɛ kɛ sababu ye ka kelenya kɛcogo ɲɛ.

Yeelen min ka fin ni ɲɛnayeli yɔrɔ ka surun, o bɛ se ka kɛ sababu ye ka jɛnsɛnni barikama kɛ, ka LED yɔrɔ surunya, ka filimu ye min bɛ yeelen bɔ, ɲɛkisɛ filanan walima LED labɛncogo kura.

Sannikɛlaw ka kan ka LED fɔcogo, difiyɛri janya, LED suguya, watti, laɲini yeelen, yeelenbɔlan juguman ani kelenya wajibiyalen di ni u bɛ ɲɛnayeli ladilikan ɲini.

Mat/Matte vs. Surface Glossy/Matte

0,5mm ni 1mm Polikarbonati jɛnsɛnni sɛbɛn

Polikarbonati ni Akiriliki ni PS Difuser Sheet

White PC Diffuser Sheet ka fɛn kolomaw

Yeelen tilatilali cogo kelen na

Difuser formulation bɛ yeelen jɛnsɛn yɔrɔ bɛɛ la ani ka dɛmɛ don ka yeelen yɔrɔw yelenw, layiniw ani yeelen caman ɲɔgɔnna dɔgɔya.

Haze Haze ni Transmission Nafama

Kalanso minnu kofɔlen don, olu bɛ yeelen bɔli 82%–88% ɲɔgɔn balansi ni 90%–94% ɲɔgɔn ye sisi ye.

Kɔnɔnafiliw kɛlɛli

Polikarɔbɔnati bɛ sugandi yeelenko baara kama minnu bɛ a ɲini ka se ka fɛnw sɔgɔ, ka u minɛ ani ka u yɛrɛyɛrɛ ka tɛmɛ diffuser brittle standards materials kan.

Design min bɛ kɛ ni ja finman ye

Polikarɔbɔnati fanga b’a to panɛri finmanw bɛ se ka jateminɛ minnu janya ye milimɛtɛrɛ 0,5 ni milimɛtɛrɛ 1 ye yeelenko fɛn fitininw na ni panɛri dɛmɛna ka ɲɛ.

Baarakɛcogo caman kɛcogo

Grade bɛnnenw bɛ se ka tigɛ, ka sɔgɔ, ka sira tigɛ, ka punch, ka nɛnɛ kɔrɔta, ka thermoformed ani ka ɲɔgɔn lajɛ ka kɛ yeelen yɔrɔw ye.

Performance Optique ka kɛɲɛ ni mɔgɔw sago ye

Transmission, haze, diffusion, surface texture ani white tone bɛ se ka ladilan walasa ka bɛn LED labɛncogo ni yeelenbɔlanw dilanni suguya wɛrɛw ma.

Polikarbonati difiyɛri sɛbɛn (Polycarbonate Diffuser Sheet) kɛcogo

Panneau LED yeelenw

Polikarbonati difiyɛri sɛbɛnw bɛ kɛ yeelen bɔyɔrɔ yelen ye LED panɛriw la minnu bɛ yeelen bɔ dakunw na ani minnu bɛ yeelen bɔ kɔfɛ.

Lineaire ani Bureau Luminaires

Baara minnu bɛ kɛ, olu ye lanpanw ye minnu bɛ jɔ, lanpan minnu bɛ don duguma, tubabu LED, kabini jukɔrɔ yeelen ani baarakɛyɔrɔ yeelenbɔlanw.

Downlights ani Plafond yeelenw

Difiyɛri finmanw bɛ se ka tigɛ walima ka u kɛ yeelenbɔlan bulama ye, ka kɛ yeelen datugulan bulama ye, ka kɛ yeelen datugulan ye min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

Piblisite yeelenbɔlanw

Opal diffuser panneaux bɛ dɛmɛ ka kɔkanna yeelen tila-tila taamasiyɛn yeelenlenw kan, menu boards, kanal lɛtɛrɛw ani jago jiralanw kan.

Ɲɛjiralanw minnu bɛ yeelen bɔ kɔfɛ

Baarakɛminɛnw ye feerelikɛyɔrɔw jiralanw, jiralikɛnɛw, jiralanw, kunnafonidilanw ani kɔkanna yeelenw masirilenw ye.

Bololabaara ni foroba-yɔrɔ yeelenko

Kɛrɛnkɛrɛnnenya la, jatebɔ minnu bɛ se ka fɛnw tiɲɛ ani minnu tɛ tasuma bɔ, olu bɛ se ka jateminɛ nɛgɛso, alifanta, gare, lakɔli ani yeelenbɔlan wɛrɛw la minnu bɛ siraba kan.

Polikarbonati Diffuser Sheet Baarakɛcogo Jaw

So kɔnɔ ani kɛnɛma baarakɛcogo

Polikarbonati difiyɛri sɛbɛnfura standard bɛ ladilikan di fɔlɔ so kɔnɔ yeelenw kama, biro yeelenw, panneau yeelenw, plafond fixtures, so kɔnɔ yeelenbɔlanw ani kɔkanna yeelenbɔlanw.

Kɛnɛma baarakɛcogo bɛ UV-stabilized grade de wajibiya min dabɔra walasa ka dɔ bɔ jɛman na, sanfɛla tiɲɛni na ani ka bɔnɛ a nɔfɛta baarakɛcogo la tile yeelen waati jan kɔnɔ.

Kɛnɛma ɲɛnamaya min bɛ makɔnɔ, o bɛ bɔ dugukolo sigiyɔrɔ la, UV fanga, funteni, sɛbɛnfura janya, a sanfɛla ɲɛsincogo, a kulɛri, a sigicogo ani a saniya furaw.

Kɛnɛma pankartiw, kanal sɛbɛnw ani taamasiyɛn yeelenlenw ka kan ka baara kɛ ni kɛnɛma-kalan sɛbɛn ye min bɛ dɛmɛ ni fɛɛrɛko kunnafoniw bɛnnenw ye walima ni waati jateminɛ garanti ye.

Tasuma-fanga ni kuran yeelen hakɛw

Polikarbonati difiyɛri sɛbɛnfura standard man kan ka ɲɛfɔ a yɛrɛma ko UL 94 V-0, tasuma tɛ min na walima min bɛnnen don kuran yeelenbɔlan bɛɛ ma.

Tasuma baara bɛ bɔ resin hakɛ la, faralifɛnw, kulɛri, a bonya, sɛgɛsɛgɛli ɲɛsincogo ani sɛgɛsɛgɛli fɛɛrɛ min bɛ se ka kɛ.

Kunnafonidila minnu bɛ UL 94, glow-wire, nɛgɛso, mobili, awiyɔn walima kuran sariya wɛrɛ wajibiya, olu ka kan ka hakɛ tigitigi ni finimugu hakɛ fitinin di sani u ka fɛnw sugandi.

Kɔrɔbɔli rapɔɔri ka kan ka kuma hakɛ tigitigi ni a janya kan min bɛ di. Jate min bɛ sɔrɔ ni sɛbɛnfura belebeleba ye, o man kan ka kɛ a yɛrɛma ka kɛ 0,5mm walima 1mm sɛbɛnfura kan.

Tigɛ, Foroko ani Dilancogo

Tigɛcogo ni siraw tigɛcogo

Polikarbonati sɛbɛnw bɛ se ka tigɛ ni panɛli sɔgɔlanw ye, ni sɛrɛkili sɛrɛkiliw, CNC routeurs ani tigɛminɛn bɛnnenw ye.

Drilling ani Punching (Boli ni Punching) ye

Dingɛw, jirisunw ani jiginni fɛnw bɛ se ka dilan ni sɔgɔli, sɔgɔli walima masin kɛcogo bɛnnenw ye.

Nɛnɛ Bending (Kɔrɔlen).

Fɛn finmanw bɛ se ka kɔrɔta nɛnɛ na yɔrɔ bɛnnen dɔ kɔnɔ. Kurukuruni nɔgɔlenw ni degun kojugu bɛ se ka kɛ sababu ye ka a fin, ka a sɔgɔ kudayi walima ka kari.

Termoforming (sɛnɛfɛnw sɛnɛcogo).

Polikarɔbɔnati min bɛ se ka kɛ ni funteni ye, o bɛ se ka kɛ yeelenbɔlanw ni datugulanw kurulenw ye, a jalen kɔfɛ, a sumayalen don ani a sɔgɔlen kɔfɛ.

Sɛbɛnni ni fɛnw masirili

Écran, UV ani digital-printing systems minnu bɛ bɛn ɲɔgɔn ma, olu bɛ se ka jateminɛ kɛ logow, dancɛw, taamasiyɛnw ani yeelenfɛnw masirilenw na.

Ɲɛkisɛ ni jogoɲini sɛgɛsɛgɛli minnu bɛ fɔ

• Materiel raw-material ani diffuseur-additive sɛgɛsɛgɛli.

• Sheet janya ni a janya muɲuni.

• Bonya, janya, diagonal ani tigɛ muɲuli.

• Yeelen-yeelen-cikan.

• Haze ni diffusion ka ɲɔgɔn sɔrɔ.

• LED hotspot-dogo baarakɛcogo.

• Yeelen kelen-kelen bɛɛ yeelen yɔrɔ bɛɛ la.

• Ton finman, kulɛri coordinates ani batch consistance.

• Kulɛri-funteni jiginni min bɛ tali kɛ ɲɔgɔn na ni LED sɔrɔyɔrɔ yɛrɛ ye.

• Surface gloss ani texture consistance.

• Nɔgɔ nɛrɛma, jeli, sɔgɔsɔgɔninjɛ ani nɔgɔ.

• Flatness, curl ani dimensional sabatili.

• Impact, bending ani fabrication baarakɛcogo.

• Funteni-kɔrɔya ni jɛman kɛcogo yɔrɔ minnu na a mago bɛ a la.

• UV weathering ka ɲɛsin kɛnɛma kalataw ma.

• Tasuma ni kuran sɛgɛsɛgɛliw yɔrɔ minnu ɲɛfɔlen don.

• Finished-luminaire yeelen, yeelen ani funteni sɛgɛsɛgɛli.

Polikarbonati Diffuser sɛbɛn sugandilenw

• 0,5mm ani 1mm diffuser sɛbɛnw bɛ jira.

• A janya wɛrɛw bɛ daminɛ milimɛtɛrɛ 0,5 ɲɔgɔn na ka se milimɛtɛrɛ 12 ma.

• A bonya ye 1220mm, 1560mm, 1820mm ani 2100mm ye.

• Janya minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye ani yeelenbɔlanw tigɛlenw ka kɛɲɛ ni u bonya ye.

• Opal fin ani customized translucent kulɛriw.

• Yeelen cicogo ni sisi min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Diffusion hakɛ dɔgɔman, cɛmancɛ ani sanfɛ.

• Surfaces maté/matte ani glossy/matte.

• Matte fin, frosted ani textures customized.

• So kɔnɔ ani kɛnɛma kalan minnu bɛ sabati ni UV ye.

• Tasuma-fagalan-kalan minnu bɛ kɛ ka ɲɛsin baarakɛcogo kɛrɛnkɛrɛnnenw ma.

• Filimu min bɛ mɔgɔ tanga a fan kelen walima a fan fila bɛɛ la.

• Tigɛ, sɔgɔli, CNC siraw ani foroko dɛmɛni.

• Misaliw minnu bɛ kɛ ka ɲɛnayeli ni yeelenbɔlan dafalenw sɛgɛsɛgɛ.

Kunnafoni minnu ka kan ka kɛ Diffuser Sheet Quotation kama

• A ka kan ka kɛ sɛbɛnfura janya ye.

• A bonya, a janya ani a tigɛcogo muɲuni.

• Opal fin ton walima kulɛri min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Yeelen cili ni sisi wajibiyalen.

• LED dogo fanga ni kelenya wajibiyalen.

• Matte/matte, glossy/matte walima yɔrɔ wɛrɛ.

• LED suguya, fanga ani kulɛri funteni.

• LED pitch walima yɔrɔjan.

• LEDw ni diffuser sheet cɛ janya.

• Luminaire jugumanba ani reflecteur jɔcogo.

• So kɔnɔ walima kɛnɛma baarakɛcogo.

• UV, tasuma walima kuran hakɛ wajibiyalen.

• Panneau plat, nɛnɛ-kɔrɔlen walima thermoformé component.

• Tigɛ, sira, sɔgɔli walima sɛbɛnni wajibiyalenw.

• Protective-film ani pakew wajibiyalenw.

• Misali hakɛ, yamaruya fɔlɔ ani san ɲinini.

• Destination port ani delivery don min ɲinina.

Aw ka Diffuser Sheet wajibiyalenw ci

Packing ani Delivery

Misaliw pakew : Difiyɛri sɛbɛn misɛnninw ni misali tigɛlenw bɛ se ka lakana ni PE filimu ye, ni kraft papier ani kartɔnw ye.

Filimu min bɛ mɔgɔ tanga : PE lakanani filimu bɛ se ka kɛ yɔrɔ kelen walima yɔrɔ fila bɛɛ la walasa ka dɔ bɔ sɔgɔsɔgɔninjɛw la tigɛcogo, a cicogo ani a lajɛcogo la.

Sɛbɛnw dilanni : Sɛbɛnw bɛ se ka siri ni PE filimu walima kraft papier ye ka u pake ka kɛɲɛ ni u hakɛ wajibiyalenw ye ani u girinya bɛɛ lajɛlen.

Palɛti pakew : Kilo 500–2000 ɲɔgɔn bɛ se ka don plywood palɛti kan, ka kɛɲɛ ni sɛbɛn hakɛ, a janya ani a minɛcogo wajibiyalenw ye.

Konteyna doni : Reference doni bɛ se tɔni 20 ma, ka kɛɲɛ ni a bonya ye, a palɛti cogoya, a hakɛ ani a girinya dantigɛli sariya siratigɛ la.

Waati min bɛ kɛ : A ka c’a la, a dilanni bɛ kɛ tile 7–15 ɲɔgɔn na, a ɲɛfɔcogo, a hakɛ, a foroko ani a sarali dafalen kɔfɛ.

Lasecogo sariyaw: EXW, FOB, CNF, CIF ani jagokɛcogo wɛrɛw bɛnna minnu kan, olu bɛ sɔrɔ.

Seereyaw ni Kɔrɔbɔli sɛbɛnw

Sɛbɛn minnu bɛ sɔrɔ, olu bɛ se ka kɛ ɲɛnayeli sɛgɛsɛgɛli kunnafoniw ye, fɛnw dantigɛlenw kunnafoniw, fɛn dilannenw ɲɛfɔcogo ani jogoɲumanya seereyaw.

SGS ka kan ka ɲɛfɔ ka kɛɲɛ ni kunnafoni yɛrɛyɛrɛ walima sɛgɛsɛgɛli hakɛ ye. A man kan ka jate i n’a fɔ diɲɛ bɛɛ ka fɛn dilannenw lakanani, tasuma-fagalan, kɛnɛma-waati walima kuran seere.

Sannikɛlaw ka kan k’a jira ko kunnafoni kelen-kelen bɛɛ bɛ tali kɛ polikarbonati hakɛ tigitigi la, a kulɛri, a bonya, a yɔrɔ ani a dilanni cogoya tigitigi min bɛ san.

Mun na i bɛ HSQY sugandi ka kɛ i ka Polikarbonati difiyɛri dilanbaga ye?

• 0,5mm ani 1mm finman PC diffuser sɛbɛn dilanni.

• A janya wɛrɛw bɛ Se milimɛtɛrɛ 12 ɲɔgɔn ma.

• A bonya bɛ Se 2100mm ɲɔgɔn ma.

• Opal fin ani customized translucent kulɛriw.

• 82%–88% ɲɔgɔn bɛ sɔrɔ fɛnɲɛnamafagalanw tali suganditaw la.

• 90%–94% ɲɔgɔn bɛ kɛ haze suganditaw la.

• Surfaces maté/matte ani glossy/matte.

• So kɔnɔ ani baarakɛcogo kɛrɛnkɛrɛnnen kɛnɛma kalataw.

• Optique performance ani sheet hakɛw min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Misaliw ka ɲɛsin LED hotspot ni luminaire sɛgɛsɛgɛli ma.

• Tigɛ, foroko ani fɛn dilanni dɛmɛni.

• Forobaciyɛn bɔli jamana wɛrɛw la ani dɛmɛ min bɛ don jamana wɛrɛw la ka taa jamana wɛrɛw la.

Sani u ka fɛn caman dilan, HSQY b’a ɲini ka difiyɛri sɛbɛn sugandilen kɔrɔbɔ kiliyan ka yeelenbɔlan yɛrɛ kɔnɔ ni LED pankurun laban ye, ni ɲɛnayeli yɔrɔjan, yeelenbɔlan, karamɔgɔ ani fanga sigicogo ye.

Aw ye HSQY lajɛ walasa ka misaliw ni sɔngɔko dɔn

HSQY Duniya Ɲɛjiraliw

Ɲininkali minnu bɛ kɛ tuma caman na Polikarbonati jɛnsɛnni sɛbɛnw kan

Polikarbonati difiyɛri sɛbɛn ye mun ye?

O ye PC sɛbɛn ye min bɛ yeelen bɔ, min dilannen don walima min dilannen don walasa ka yeelen jɛnsɛn ani ka yeelen yɔrɔ dɔ dilan min bɛ kɛ cogo kelen na.

Baarakɛcogo kunbabaw ye jumɛnw ye?

Baarakɛcogo dɔw ye panneau LED yeelenw ye, yeelenbɔlanw, yeelenbɔlanw, dugumalanw, sanfɛlanw, yeelenbɔlanw, taamasiyɛnw yeelenlenw ani jiralan minnu bɛ yeelen bɔ kɔfɛ.

Fɛnɲɛnɛma jumɛnw bɛ sɔrɔ?

A janya jiralenw ye 0,5mm ani 1mm ye. Sugandili wɛrɛw bɛ daminɛ milimɛtɛrɛ 0,5 ɲɔgɔn na ka se milimɛtɛrɛ 12 ma.

Bonya jumɛnw bɛ sɔrɔ?

A bonya dantigɛlen ye 1220mm, 1560mm, 1820mm ani 2100mm ye. Tigɛcogo min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, o bɛ sɔrɔ.

Yeelen cicogo ye mun ye?

Optique grades minnu kofɔlen don, olu bɛ 82%–88% ɲɔgɔnna yelen-yeelen cili di. O nɔ tigitigi bɛ bɔ a bonya, a kulɛri, a sanfɛla ani a jɛnsɛnni furakɛcogo la.

Haze nafa ye mun ye?

Kalanso minnu tɔgɔ sɛbɛnna, olu bɛ 90%–94% ɲɔgɔn di sisi ma. Kɔrɔbɔli fɛɛrɛ min bɛ se ka kɛ ani sɛbɛnfura janya ka kan ka dafa.

Yala sisiba bɛ a jira ko LED yɔrɔw tɛna ye wa?

Ayi LED dogoli fana bɛ bɔ LED fɔcogo la, ɲɛnayeli yɔrɔjan, fanga, yeelenbɔlan jɔcogo, sɛbɛnfura janya ani a jɛnsɛnni fɛɛrɛ.

Danfara jumɛn bɛ banakisɛfagalanw ni sisi cɛ?

Tɛmɛsira bɛ yeelen hakɛ min tɛmɛ, o suman. Haze bɛ yeelen min bɛ ci, o hakɛ min bɛ jɛnsɛn, o suman.

Yala 0,5mm walima 1mm ka fisa ni panneau LED ye wa?

0,5mm sɛbɛnfura ka nɔgɔn ani a bɛ se ka wuli ka bɔ a nɔ na. 1mm sɛbɛn bɛ gɛlɛya caman di. Sugandili ɲuman bɛ bɔ karamɔgɔya la, panɛli hakɛw ani ɲɛnayeli wajibiyalenw na.

Danfara jumɛn bɛ matte/matte ni glossy/matte cɛ?

Matte/matte bɛ ni textured low-reflection surfaces ye a fan fila bɛɛ la. Glossy/matte bɛ fan kelen min ka nɔgɔn ni matte fan kelen ye min bɛ jɛnsɛn.

Yala polikarbonati ka fisa ni akiriliki ye difiyɛri pannew kama wa?

A ka c’a la, polikarɔbɔnati bɛ a to a bɛ se ka fɛnw sɔgɔ ka ɲɛ ani ka fɛn dilanni sɛgɛsɛgɛli caman kɛ. Akiriliki bɛ se ka ɲɛda cogoya ɲuman di ani ka a ɲɛda gɛlɛya. Sugandili bɛ bɔ baarakɛcogo la.

Yala PC diffuser sheet ka fisa ni PS ye wa?

PC bɛ sugandi caman na walasa ka nɔba bila, funteni ani hakɛ baarakɛcogo la. Tuma caman na, PS bɛ sugandi so kɔnɔ yeelenbɔlanw kama minnu musaka ka dɔgɔ.

Yala baara bɛ se ka kɛ ni o sɛbɛnfura ye kɛnɛma wa?

UV-stabilized grade min bɛ kɛ ka kɛɲɛ ni a kɛcogo kɛrɛnkɛrɛnnen ye, o de wajibiyalen don kɛnɛma baara kama. So kɔnɔfɛnw minnu bɛ kɛ ka kɛɲɛ ni sariya ye, olu man kan ka kɛ kɛnɛma u yɛrɛma.

Yala difiyɛri sɛbɛn bɛ tasuma bali wa?

Tasuma-fagalan hakɛw bɛ se ka sɔrɔ, nka hakɛ ka kan ka dafa ka kɛɲɛ ni hakɛ tigitigi ni a girinya ye.

Yala PC diffuser sheet bɛ se ka kɛ thermoformé ye wa?

Awɔ. Sɛbɛn minnu bɛ kɛ ka fɛnw dilan, olu bɛ se ka kɛ ni funteni ye, u jalen kɔfɛ, u sumayalen don ani u sɔgɔlen kɔfɛ.

Yala a bɛ se ka kɔrɔta nɛnɛ na wa?

Polikarbonati sɛbɛn finmanw bɛ se ka kɔrɔta nɛnɛ na u hakɛ fitinin bɛnnen kɔnɔ. A dilanni dafalen ka kan ka sɛgɛsɛgɛ walasa ka a dɔn ni degun tɛ a la ani ni a bɛ se ka wuli waati jan kɔnɔ.

Yala difiyɛri sɛbɛn bɛ se ka tigɛ ka kɛɲɛ ni a bonya ye wa?

Awɔ. Tigɛ, sɔgɔli, siraw dilanni ani fɛn dilanni baara wɛrɛw bɛ se ka kɛ ka kɛɲɛ ni mɔgɔw sago ye.

Yala optique baarakɛcogo bɛ se ka kɛ ka kɛɲɛ ni mɔgɔw sago ye wa?

Transmission, haze, diffusion, white tone ani surface texture bɛ se ka kɛ ka kɛɲɛ ni fɛɛrɛko kɛcogo ye ani komandi hakɛ ye.

Yala sɛbɛn bɛ se ka LED kulɛri funteni Changer wa?

Difiyɛri furakɛcogo bɛ se ka kɛ sababu ye ka kulɛri walima kulɛri-funteni caman wuli. Yeelenbɔlan dafalen ka kan ka sɛgɛsɛgɛ ni LED sɔrɔyɔrɔ laban ye.

Yala misaliw bɛ sɔrɔ wa?

Sɛbɛn misɛnninw ni tigɛlenw bɛ se ka sɔrɔ walasa ka fɛnw cicogo, sisi, LED dogocogo, u kulɛri ani u dilanni lajɛ. Kuri doni ka kan ka dafa ni feerekɛlaw ye.

A dilanni ɲɛminɛ waati ye mun ye?

A ka c’a la, sɛnɛcogo jɔnjɔn bɛ tile 7–15 ɲɔgɔn ta, a ɲɛfɔcogo, a hakɛ, a foroko ani a sarali dafalen kɔfɛ.

Kunnafoni jumɛnw de ka kan ka kɛ walasa ka quotation sɔrɔ?

Aw bɛ a janya, a bonya, a jiginni, a sisi, a ka LED fɔcogo, a yɔrɔ janya, a sanfɛla, a kɛcogo, a hakɛ ani a UV walima a tasuma hakɛ wajibiyalen di.

Aw ye Custom Diffuser Sheet Quote sɔrɔ

HSQY Plastic Group ko la

HSQY Plastic Group bɛ polikarbonati difiyɛri sɛbɛnw, PC sɛbɛn gɛlɛnw, PC filimuw, PVC sɛbɛnw, PET sɛbɛnw ani plastiki fɛnw di diɲɛ kɔnɔ B2B kuntigiw ma.

HSQY bɛ yeelen dilannikɛlaw, taamasiyɛn dilannikɛlaw, jiralikɛnɛw, plastiki dilannikɛlaw, fɛnw donbagaw ani u feerelaw dɛmɛ ni ɲɛkisɛw ye, ka fɛnw dilanni kɛ ka kɛɲɛ ni u yɛrɛ sago ye, ka jogo sɛgɛsɛgɛ, ka u dilanni ani ka u bila ka taa jamana wɛrɛw la.

Quote ni Sample ɲini