PVC Aduruyɛ Krataa

Nnuruyɛ PVC Blister Film Manufacturer

HSQY de nnuru PVC film ne laminated nnuruyɛ nkrataa ma thermoformed blister packaging a tablets, capsules, pills, suppositories ne akwahosan ho nneɛma a wɔapaw. Nneɛma ahorow no bi ne PVC sini a ɛyɛ den, PVC/PE sini, PVC/PVDC sini ne PVC/PVDC/PE a wɔabom ayɛ sini a ɛwɔ kɔla a emu da hɔ, tint ne opaque.

Ɛsɛ sɛ wɔpaw nnuru a wɔde kyekyere nnuru a wɔde yɛ akisikuru sɛ nhyehyɛe a edi mũ. The forming web, aluminium lidding foil, blister cavity, sealing lacquer, packaging machine, nnubɔne ho nkate, storage wim tebea ne shelf nkwa a wɔhwehwɛ nyinaa nya adwumayɛ a etwa to so nkɛntɛnso. HSQY betumi ama amanne kwan so thicknesses, roll trɛw, kɔla, coating structures ne sɔhwɛ nneɛma ma packaging-line nhwehwɛmu.

Nnuru PVC Film Nneɛma a Wɔde Yɛ Adwuma

HSQY de nnuru a wɔde yɛ sini nhyehyɛe ahorow pii ma. Nhyehyɛe biara ma thermoformability, akwanside adwumayɛ, mfiri ahoɔden ne ɛka a ɛkari pɛ soronko.

Hwehwɛ nneɛma a ɛwɔ atifi hɔ no mu na fa toto nnuruyɛ sini ahorow a ɛwɔ hɔ ho. Nneɛma a ɛfa ho a wubetumi apaw bi ne PVC film a wɔde yɛ nnuru a wɔde kyekyere nneɛma, 0.25 mm aduruyɛ PVC krataa a ɛda adi pefee, PVC/PE sini a wɔde yɛ suppository packaging ne nea PVDC-a wɔde akata PVC sini ahorow so.

Nnuru PVC Film Nkyerɛkyerɛmu a Wɔtaa Yɛ

HSQY de nneɛma mmusua pii a ɛsono ne kɛse ma. Table a ɛwɔ aseɛ ha no bɔ blister-film ho nsɛm a wɔtaa ka ho asɛm tiawa. Ɛsɛ sɛ wosi gyinapɛn ahorow a etwa to no so dua ma nneɛma no nhyehyɛe pɔtee ne sɛnea wɔyɛ no.

Specification note: Ɛnsɛ sɛ wɔde 'medical PVC sheet' range a ɛtrɛw no frafra nnuruyɛ blister film a ɛfata. Nnuru a wɔde kyekyere nneɛma titiriw hwehwɛ sɛ wɔyɛ nnuru a wɔahyɛ da ayɛ, nkyerɛkyerɛmu a wɔakyerɛkyerɛ mu wɔ su pa ho, nea wotumi hwehwɛ ne yɛ ne nkrataa a ɛfoa so a ɛfa dwumadie pɔtee bi ho.

PVC vs PVC / PVDC vs PVC / PVDC / PE Akisikuru Film

Ɛsɛ sɛ akwanside a wɔpaw no gyina packaged-product stability data so. Ebia sini a akwanside kɛse wom ho nhia mma ade a ɛyɛ den, bere a ebia PVC a wɔtaa de di dwuma no nyɛ nea ɛfata mma aduru a ɛma nsu tɔ a wɔtɔn wɔ wim tebea a ɛyɛ hyew na ɛyɛ nwini mu.

Sɛnea Nnuru PVC Blister Packaging Yɛ Adwuma

1. Web unwinding: Wɔbue nnuru PVC roll no wɔ nhyɛso a wɔahyɛ so ase.

2. Ɔhyew: Ntama a wɔde yɛ ade no fa ɔhyew mprɛte anaa rollers mu kosi sɛ ebedu tebea a wɔhwehwɛ sɛ wɔde yɛ ade no mu.

3. Thermoforming: Vacuum, mframa a wɔahyɛ no den, plug assistance anaa nea wɔaka abom na ɛyɛ blister cavities no.

4. Product filling: Wɔde tablets, capsules anaa units afoforo gu abura a wɔayɛ no mu.

5. Ntama a wɔde kata so: Wɔde aluminium a wɔde heat-seal-lacquered ayɛ anaa ade foforo a ɛfata a wɔde kata so gu ntaboa a wɔde kata so no so.

6. Ɔhyew a wɔde siw ano: Ɔhyew a wɔahyɛ so, nhyɛso ne bere a wɔde tra hɔ no ma lacquer no yɛ adwuma na ɛma nneɛma a wɔde ahyɛ mu no yɛ adwuma.

7. Nhwehwɛmu ne punching: Wɔhwɛ wɛb no mu, de code gu mu na wɔtwa no ma ɛyɛ blister cards a wɔawie.

PVC film no ankasa ntaa mma package dwumadi nyinaa. Blister pack a etwa to no yɛ web a wɔayɛ, lidding foil, heat-seal system ne geometry a mfiri tooling no ayɛ.

Thermoforming Adwumayɛ ne Mfiri a ɛne ne ho hyia

Wɔn a wɔde nnuru sini ma a wɔkorɔn no si shrinkage a wɔahyɛ so, ne kɛse a ɛkɔ so pɛpɛɛpɛ, tight winding ne stable forming so dua efisɛ saa su ahorow yi ka line efficiency tẽẽ. Sini a ɛsono wɔ wɛb no nyinaa betumi ama abura afasu a ɛnteɛ, wɛb tracking haw ahorow, dinkyerɛw a enye, seal wrinkles ne punching a ɛnkɔ so pɛpɛɛpɛ aba.

Sɛ woresusuw nnuru foforo PVC film ho a, fa blister-afiri brand ne model, platen anaa rotary forming nhyehyɛe, heating-zone nhyehyɛe, web trɛw, line ahoɔhare, cavity bun, draw ratio, indexing tenten, winding akwankyerɛ ne maximum roll diameter ma.

Dɛn na Ɛsɛ sɛ Wɔhwehwɛ Mu Wɔ Asɔhwɛ a Wɔreyɛ no Mu?

• Web tracking ne roll tension a ɛyɛ den

• Ɔhyew biakoyɛ wɔ ɔkwan a wɔfa so yɛ no trɛw so

• Cavity nkyerɛase ne ntwea so nhyehyɛe

• Ɔfasu-a ɛyɛ den kyekyɛ bere a wɔayɛ no akyi

• Web shrinkage ne dinkyerɛw

• Fitaa, adwennwen agyiraehyɛde, ahurututu anaa pinholes

• Flange flatness ansa na ɔhyew sealing

• Punching pɛpɛɛpɛ ne cut-edge su

Nea ɛne Aluminium Lidding Foil hyia

Wɔtaa de nnuru a wɔde yɛ PVC blister film no to aluminium foil a wɔde pia mu a ɛkura lacquer a wɔde hyɛ mu a ɛma ɔhyew a ɛne nea ɛreyɛ no hyia no so. Nsɔano a edi mu gyina lacquer nnuru, PVC anaa coated-film soro, nsɔano hyew, nhyɛso, bere a wɔde tra hɔ, flange ahotew ne mfiri nnwinnade so.

Ansa na wɔbɛyɛ no aguadi mu no, fa krataa a wɔde kata so a wopɛ sɛ wode kata so no sɔ sini a ɛyɛ pɛpɛɛpɛ no hwɛ. Hwɛ nsɔano ahoɔden, channel leakage, foil delamination, bue tumi, push-through adwumayɛ ne nsɔano consistency akyi storage ne stability conditioning.

PVC Aduruyɛ Krataa a Wɔde Di Dwuma

• Tablet blister a wɔde ahyɛ mu

• Capsule blister packs a ɛyɛ den na ɛyɛ mmerɛw

• Pill ne nutraceutical blister a wɔde kyekyere nneɛma ho

• Suppository ne unit-dose packaging a wɔde laminated nhyehyɛe a ɛne no hyia di dwuma

• Mmoa nnuru a wɔde yɛ blister packs

• Ayaresa-sɔhwɛ ne nhwɛsode-dose packs

• Diagnostic-kit components a wɔapaw ne healthcare-product trays bere a wɔafata akyi

• Aduruyɛ-mfiri a wɔde kyerɛ trays a ɛnyɛ sterile a wɔagye nneɛma ne sɛnea wɔde kyekyere nneɛma no atom

Sterility note: Ɛnsɛ sɛ wɔka standard pharmaceutical PVC film ho asɛm ara kwa sɛ sterile akwanside ade. Aduruyɛ-mfiri a wɔde kyekyere ne terminal sterilization hwehwɛ sɛ structure-specific validation ma sterilization kwan, nsɔano nhyehyɛe, microbial akwanside ne product shelf nkwa nna.

Nnuru PVC Film a emu da hɔ, Tinted na Opaque

PVC a emu da hɔ ma wotumi hu nneɛma no na ɛboa ma wɔde aniwa hwɛ tablet ne capsules. Wobetumi de bruu a ɛyɛ mmerɛw anaa tints afoforo adi dwuma de akyerɛ nsonsonoe a ɛda nneɛma ahorow ntam, afiri a wɔde hwɛ nneɛma mu anaasɛ wɔde bɛkyerɛ nneɛma a wɔde yɛ nneɛma. Kɔla fitaa a ɛnyɛ hann, amber anaa amanne kwan so betumi atew hann a ɛkɔ so no so, nanso ɛnsɛ sɛ wɔde kɔla nkutoo di dwuma sɛ adanse a ɛkyerɛ sɛ hann bɔ ho ban yiye.

Wɔ nneɛma a hann te nka ho no, kyerɛkyerɛ spectral transmission anaa hann-ahobammɔ adwumayɛ a wɔhwehwɛ mu na fa stability studies so si so dua. Ɛsɛ sɛ wɔde nneɛma a wɔde yɛ kɔla ne kɔla nso ka nneɛma a wɔawie no ahobammɔ ne mmara ho nhwehwɛmu ho.

Akwanside Ahwehwɛde ne Shelf-Life Paw

Ɛsɛ sɛ sini a ɛyɛ no bɔ aduru no ho ban wɔ ne nkwa nna a wɔapene so sɛ ɛbɛkora so no nyinaa mu. Akwanside a ɛho hia no gyina nnuru a wɔde yɛ, tablet a wɔde kata so, capsule shell, cavity dimensions, film area a ɛda adi, wim tebea a wɔde sie, secondary packaging ne distribution tebea so.

Bisa nsɛm a edidi so yi ansa na woapaw nhyehyɛe bi:

• So ade no te nka sɛ nsu, mframa pa, hann anaa hua a ɛyera?

• Nkwa nna bɛn na ɛsɛ sɛ wonya?

• Wim tebea ne ɔkwan a wɔfa so kyekyɛ bɛn na ɛfata?

• Cavity bun ne formed-film surface area bɛn na ɛho hia?

• So wɔde blister cards no bɛhyɛ nnaka, nkotoku anaa nea wɔde akata so mu?

• So wɔde desiccant anaa akwanside a ɛto so abien a wɔde ahyɛ mu na edi dwuma?

• Akwanside data ne stability results bɛn na ɛwɔ hɔ ma mprempren package no?

Unformed-film barrier data ho wɔ mfaso ma screening, nanso cavity a wɔayɛ no yɛ tratraa sen mfitiase web no. Enti ɛsɛ sɛ wɔde cavity geometry ankasa ne blister pack a wɔawie no di paket ahobammɔ a etwa to no ho adanse.

Quality Control ma Nnuru PVC Film

Nnuru a wɔde yɛ blister film hwehwɛ sɛ wɔhyɛ nsɛm a wɔahyɛ da ayɛ ne batch traceability. Ɛdenam sɛnea wɔahyehyɛ nneɛma ne nea adetɔfo hwehwɛ so no, nea ɛka nneɛma a wɔhwɛ so no betumi ayɛ:

Mmara ne Nnuruyɛ Ho Nwoma

Adansedi krataa biako biara nni hɔ a ɛma PVC sini biara fata aduru ne gua biara. Wɔtaa hwɛ sɛnea nnuru a wɔde kyekyere nneɛma ho no fata wɔ ahobammɔ, nea ɛne ne ho hyia, ahobammɔ ne adwumayɛ a ɛwɔ aduru a wɔahyɛ da ayɛ no mu.

Ɛgyina gua a wɔrekɔ ne adetɔfoɔ nkrataa so no, nkrataa a wɔsrɛ no betumi ayɛ:

• Product specification ne mfiridwuma ho nsɛm krataa

• Adansedi krataa a ɛkyerɛ sɛ wɔayɛ nhwehwɛmu wɔ nneɛma a wɔyɛ no batch biara ho

• Nneɛma a wɔahyehyɛ ne mpaemuka a ɛkyerɛ sɛ ɛne ne ho hyia

• Quality-management anaa manufacturing-beae ho nsɛm

• Pharmacopoeial sɔhwɛ ho nsɛm a ɛfata

• Extractables, migration anaa ahobammɔ nhwehwɛmu data

• Akwanside, thermoforming ne ɔhyew-nsɔano adwumayɛ data

• Nsakrae-hwɛ ne batch-traceability ho nsɛm

• Mmara kwan so mmoa nkrataa a wɔsrɛɛ sɛ wɔmfa nnuru master file anaa aguadi-tumi krataa dossier mma

Ɛsɛ sɛ adetɔfo ka sɛ ebia ɛsɛ sɛ nneɛma no foa ahwehwɛde ahorow a ɛbata United States, Europa Aman Nkabom, United Kingdom, Japan anaa tumidi foforo ho no so anaa. Nwoma te sɛ ISO 9001, SGS, RoHS anaa REACH amanneɛbɔ betumi ayɛ nea mfasoɔ wɔ so, nanso ɛnsi nnuru ne nneɛma a ɛne ne ho hyia, data a ɛgyina pintinn anaa gua so ahwehwɛdeɛ a ɛfa mfitiaseɛ a wɔde kyekyere nneɛma ho no ananmu.

So Nnuru PVC Film Fata Ma Aduruyɛ Mfiri?

Wobetumi de PVC a ɛyɛ den ne PVC nhyehyɛe a wɔayɛ no laminated adi dwuma ama aduruyɛ-mfiri trays a wɔapaw, diagnostic-kit afã horow ne akwahosan ho nneɛma a ɛnyɛ sterile. Nneɛma a wɔhwehwɛ no yɛ soronko wɔ tablet blister film a wɔtaa de di dwuma ho bere a ɛsɛ sɛ ade a wɔde ahyɛ mu no gyina sterilization ano, kura akwanside a ɛnyɛ sterile mu anaasɛ ɛne aduruyɛ-mfiri a wɔde kyekyere nneɛma gyinapɛn ahorow hyia no.

Fa mfiri no su, sterilization kwan, nsɔano nhyehyɛe, akwantu ahwehwɛde, shelf nkwa ne mmara gua so ansa na woapaw ade bi. Gamma irradiation, electron beam, ethylene oxide, steam ne sterilization akwan afoforo betumi aka polymers wɔ ɔkwan soronko so na ɛhwehwɛ sɛ wogye nhyehyɛe pɔtee bi tom.

Printing, Coding ne Nneɛma a Wɔde Yɛ Adwuma

Wɔde nsɛm dodow no ara a ɛsakra te sɛ batch nɔma ne da a ɛbɛba awiei no di dwuma wɔ blister pack a wɔawie anaa lidding foil no so bere a wɔrehyɛ no. Ebia kɔla a wɔahyɛ da ayɛ, agyiraehyɛde a wɔatintim anaasɛ aduru titiriw a wɔde yɛ adwuma wɔ soro no betumi aba ama PVC adan a wɔapaw, nanso ɛsɛ sɛ wɔma tintim tẽẽ wɔ wɛb a ɛreyɛ no so no yɛ nokware ma ink a ɛbata ho, asiane a ɛwɔ atutra mu, mfiri a wɔakyerɛw din ne nnuru ne nneɛma a wɔde di nkitaho.

Fa adwinni, kɔla dodow, ɔfã a wɔatintim, ne tenten a wɔasan ayɛ, aniwa-agyiraehyɛde kɛse, kwan a wɔfa so twitwiw ne sɛ ebia ink no bɛhwɛ ade no, ade a wɔde nkata so anaa abɔnten so ma. Ɛsɛ sɛ wɔde ink nhyehyɛe a wɔahyɛ so na wɔapene so di dwuma de tintim nnuru tintim.

Blister-Film Ɔhaw a Ɛtaa Ba ne Nneyɛe a Wɔde Siesie Nneɛma

Nnuru PVC Rolls a Wɔkora So ne Nea Wɔde Di Dwuma

• Fa nhoma mmobɔwee sie wɔ nea wɔde ahyɛ mu mfiase no mu wɔ baabi a ɛho tew, ɛhɔ yɛ kusuu na wɔhwɛ ɔhyew so.

• Bɔ sini no ho ban fi owia hann tẽẽ, nsu, mfutuma, hua a ano yɛ den ne nnuru a ɛsɛe ade ho.

• Ma nhoma mmobɔwee no gyina hɔ tẽẽ anaasɛ gyina so sɛnea nea ɔde nneɛma no ahyɛ mu no nhyehyɛe te na amma anoano ansɛe na anhwɛ akyirikyiri.

• Mma ntwe nhoma mmobɔwee mfa fam anaasɛ mfa sini anoano a enni nnyinaso mma so.

• Ma nneɛma no kari pɛ ma ɛnyɛ nea ɛwɔ dan a wɔyɛ nneɛma mu no ansa na woabue nneɛma a ɛbɔ nsu ho ban no bere a ɛho hia no.

• Fa first-in, first-out inventory control di dwuma na hwɛ batch identity so wɔ slitting ne packaging nyinaa mu.

• Di shelf-life ne storage tebea horow a wɔahyɛ no den a wɔaka ama film grade pɔtee no akyi.

Nneɛma a Wɔsan De Di Dwuma ne Nneɛma a Ɛbɛkɔ So Daa Ho Nsusuwii

PVC a ɛyɛ den no ntumi sɛe nneɛma a nkwa wom anaasɛ wotumi de gu fie. Ɛyɛ den nso sɛ wɔbɛsan de nnuru a wɔde yɛ blister packs adi dwuma wɔ gua pii so efisɛ wɔde PVC anaa akwanside a ɛyɛ ntaban no ahyɛ aluminium foil mu na ebia packs no bɛkora nnuru nkae so.

Nkɔsoɔ a ɛbɛtumi aba no bi ne sɛ wɔbɛtew sini no mu duru so a wɔrensɛe adwumayɛ, wɔbɛpaw akwansideɛ nhyehyɛeɛ a ɛba fam koraa a ɛdi ahwehwɛdeɛ a ɛma ɛgyina pintinn so, wɔbɛma abura no geometry ayɛ yie, wɔbɛtew nneɛma a wɔde yɛ nneɛma a ɛho tew so, wɔbɛtetew adwumayɛbea mu nwura a ɛho tew mu na wɔbɛsɔ nhyehyɛeɛ a wɔde asi hɔ a wɔde boaboa blister-pack ano wɔ baabi a ɛwɔ hɔ no ahwɛ.

Wobetumi asusuw akwan foforo a PVC nnim te sɛ mono-PP, APET, cyclic olefin structures anaasɛ aluminium-based cold-form packaging ho, nanso ɔkwan foforo biara sesa yɛ adwumayɛ, akwanside, mfiri, ɛka ne mmara ho nkrataa. Nneɛma mu nsakrae hwehwɛ sɛ wɔyɛ mfiridwuma ne sɛnea nneɛma gyina pintinn ho nhwehwɛmu foforo.

Nneɛma a Wɔde Gu Nneɛma Mu ne Nneɛma a Wɔde Kɔ Amannɔne

Nnuru PVC film no taa de ma wɔ tightly kuru rolls abɔ ho ban ne PE film, kraft krataa, awiei ahobammɔ ne export pallets. Packing nhyehyeɛ gyina roll trɛw, roll mu duru, core kɛseɛ, maximum roll diameter ne customer handling equipment.

Ansa na wobɛkra no, si so dua sɛ:

• Maximum roll weight a wogye tom wɔ packaging line no mu

• Core mu diameter ne core nneɛma

• Maximum roll abɔnten diameter

• Winding akwankyerɛ ne coated-afã kwankyerɛ

• Splices dodow ne ne su a wɔma ho kwan

• Roll identification ne batch-label nhyehyɛe

• Pallet kɛse, gross weight ne stacking anohyeto ahorow

• Nneɛma a wɔde gu ade mu ne nsu a ɛbɔ ho ban a wɔhwehwɛ

Dɛn Nti na Wopaw HSQY sɛ Wo Nnuru PVC Film Supplier?

• PVC a ɛyɛ den, PVC/PE, PVC/PVDC ne PVC/PVDC/PE nneɛma a wɔpaw

• Amanneɛbɔ thickness, slit trɛw, roll diameter, core ne winding nhyehyɛe

• Kɔla nkɔso a emu da hɔ, tinted na opaque

• Grades ma standard ne higher-akwanside nnuru blister packaging

• Nhwɛsode ne sɔhwɛ-roll mmoa ma blister-line sɔhwɛ

• Batch specifications, test documents ne export nkrataa a ɛhyɛ grade a wɔasi so dua no ase

• Bulk roll packaging ne amanaman ntam shipment mmoa

• Ɛfa ho PVDC-coated film ne nnuru a wɔde kyekyere nneɛma a wɔde ma

Bisa Nnuru PVC Film Nhwɛsode ne Bo

Sɛ wopɛ sɛ wunya nsɛm ho nyansahyɛ ne nsɛm a wɔafa aka a edi mu a, fa:

• Nnuru dodow a wɔde ma ne aduru no nkate

• Mprempren forming-film nhyehyɛe ne supplier specification

• PVC a ɛho hia ne PVDC a wɔde kata so no mu duru, sɛ ɛfata a

• Film trɛw, core diameter, roll diameter ne roll mu duru

• Blister-machine model, a ɛyɛ type ne line ahoɔhare

• Cavity nsusuwii, twetwe bun ne blister-card nhyehyɛe

• Aluminium lidding foil ne ɔhyew-nsɔano lacquer type

• Nsuo, oxygen ne hann akwansideɛ a ɛhia

• Kɔla, tintim anaa ade a wɔde kata so ho ahwehwɛde

• Destination gua ne mmara ho nkrataa a wɔhwehwɛ

• Sɔhwɛ dodow, aguadi dodow ne afe afe ahwehwɛde

• Packaging, pallet ne delivery ahwehwɛde ahorow

Fa HSQY di nkitaho denam asɛmmisa krataafa a wɔde bɛbisa mfiridwuma ho nsɛm, nhwɛsode, sɔhwɛ nhoma mmobɔwee ne bo a wɔbɔ kɛse.

FAQ Fa Nnuruyɛ PVC Film Ho

Dɛn ne nnuru a wɔde yɛ PVC sini?

Nnuru PVC sini yɛ nhama a ɛyɛ den, mpɛn pii no ɛnyɛ plasticized forming web a wɔde yɛ thermoform blister cavities ma tablets, capsules ne unit-dose nneɛma afoforo. Wɔde ade a wɔde kata so a ɛne no hyia so na ɛyɛ blister pack a wɔawie no.

PVC a ɛyɛ duru bɛn na wɔde yɛ nnuru a wɔde kyekyere nnuru a ɛyɛ akisikuru?

Nnuru a wɔtaa de yɛ blister-film no duru bɛyɛ 0.20–0.30 mm, ɛwom sɛ HSQY nnuru a wɔde yɛ nnuru no trɛw fi bɛyɛ 0.13–0.50 mm de. Ne kɛse a ɛfata gyina cavity kɛse, draw bun, product mu duru, mfiri tebea ne mfiri ahoɔden a wɔhwehwɛ so.

Nsonsonoe bɛn na ɛda PVC ne PVC/PVDC sini ntam?

PVC a ɛyɛ den ma emu da hɔ yiye na ɛma ɛyɛ hyew a ɛho ka sua nanso sɛ wɔde toto sini a wɔde akata so ho a, ɛnyɛ nsu ne oxygen akwanside kakraa bi. PVC/PVDC wɔ PVDC akwanside a wɔde kata so a ɛma ahobammɔ a wɔde ma nnuru a ɛyɛ nsuo ne oxygen a ɛyɛ mmerɛw no tu mpɔn.

Dɛn ne PVC/PVDC/PE nnuruyɛ sini?

Ɛyɛ multilayer nnuruyɛ filming film a ɛka PVC nnyinaso, PVDC akwanside layer ne PE mfinimfini anaa dwumadi layer bom. Nhyehyɛe no betumi ama akwanside ne forming adwumayɛ a ɛkɔ anim ama deep-draw anaa hygroscopic-product applications a wɔapaw.

So PVC a wɔtaa yɛ no yɛ nnuru a wɔde yɛ sini a akwanside kɛse wom?

Dabi, standard rigid PVC ma ahobammɔ titiriw nanso wonsusuw sɛ ɛyɛ ade a ɛmma nsu anaa oxygen ntumi nkɔ mu kɛse. Ebia nneɛma a ɛhia ahobanbɔ kɛseɛ no behia PVC/PVDC, PCTFE laminate, COC-based film anaa cold-form aluminium, a wɔsɔ hwɛ sɛ ɛgyina pintinn.

So wobetumi de nnuru a wɔde yɛ PVC sini no ahyɛ aluminium foil mu?

Aane. Wɔtaa de PVC blister film a ɛyɛ den no to aluminium lidding foil a wɔde heat-seal lacquer a ɛne no hyia akata so. Ɛsɛ sɛ wɔde forming film ne packaging machine no sɔ foil, lacquer ne sealing window no pɛpɛɛpɛ hwɛ.

Kɔla ahorow bɛn na ɛwɔ hɔ?

Nneɛma a wobetumi apaw no betumi ayɛ kɔla bruu a emu da hɔ, a ɛda adi pefee, fitaa, amber, kɔkɔɔ, ahabammono, kɔkɔɔ ne kɔla afoforo a wɔahyɛ da ayɛ. Ɛsɛ sɛ wɔpene kɔla ne opacity dodow so ma nnuru a wɔde di nkitaho a wɔahyɛ da ayɛ no.

So PVC a ɛwɔ kɔla ahorow bɔ nnuru a hann nka ho ban?

Film a ɛwɔ kɔla anaa nea ɛnyɛ hann betumi atew hann a ɛkɔ so no so, nanso ɛsɛ sɛ wɔde spectral anaa stability testing a wɔakyerɛkyerɛ mu kyerɛ ahobammɔ a ɛfata. Kɔla a wotumi hu no nkutoo nyɛ adanse a ɛdɔɔso a ɛkyerɛ sɛ hann akwanside yɛ adwuma.

So PVC aduruyɛ krataa betumi akyekyere nnuruyɛ mfiri?

Wobetumi de PVC nhyehyɛe a ɛyɛ den a wɔapaw adi dwuma de ayɛ tray a ɛnyɛ sterile ne akwahosan ho nneɛma a wɔde kyekyere nneɛma. Sterile aduruyɛ-mfiri a wɔde kyekyere nneɛma hwehwɛ sɛ wɔma nneɛma no, nsɔano, sterilization kwan, microbial akwanside, akwantu adwumayɛ ne shelf nkwa nna ho adanse pɔtee.

So PVC blister film no tumi gyina mmofra ano?

PVC sini no ankasa nyɛ nea mmofra ntumi nkɔ mu. Mmofra a wɔko tia no gyina akisikuru no nhyehyɛe a edi mũ, nea wɔde kata so, ɔkwan a wɔfa so bue ne sɔhwɛ a wɔde toto nneɛma a wɔde kyekyere nneɛma a ɛko tia mmofra a wɔde di dwuma ho gyinapɛn a ɛwɔ hɔ no so.

So nnuru a wɔde yɛ PVC sini no nni mmoawa?

Standard pharmaceutical PVC film no nyɛ nea wɔde ma ara kwa sɛ ade a ɛnyɛ ɔyare mmoawa. Sterility ne sterile-barrier adwumayɛ yɛ adwuma bere a wɔayɛ nneɛma no ne nneɛma a wɔde kyekyere nneɛma a edi mũ no pɔtee, sterilized na wɔagye atom ama saa atirimpɔw no nkutoo.

Dɛn na ɛma akisikuru no ntumi nkɔ yiye?

Nea ɛtaa de ba ne ɔhyew a ɛnnɔɔso anaasɛ ɛnteɛ, bere tiaa a wɔde tra hɔ, mframa a ɛnyɛ papa anaasɛ mframa a wɔahyɛ no den, film no mu duru a ɛmfata, twetwe mu dɔ dodo, nkuku mu mframa a wɔasiw anaasɛ mfiri no nhyɛso a ɛnteɛ.

Ɔkwan bɛn so na wɔsɔ nnuru a wɔde yɛ PVC sini hwɛ?

Sɔhwɛ betumi ayɛ nea ɛka ho ne nipasu, ne kɛse, ne trɛw, aniwa mu sintɔ ahorow, kɔla, ahum, ɔhyew a ɛtwetwe, adwumayɛ a wɔde yɛ ade, mfiridwuma mu su, akwanside a wɔde fa so, ade a wɔde kata so mu duru, ɔhyew-nsɔano a ɛne ne ho hyia, atutra, nea wotumi yi ne sɔhwɛ afoforo a wɔhwehwɛ wɔ nkyerɛkyerɛmu a wɔapene so no mu.

So ISO 9001 di adanse sɛ PVC film fata ma nnuru a wɔde di nkitaho?

Dabi ISO 9001 fa nhyehyɛe a wɔde hwɛ nneɛma pa so ho. Nnuruyɛ-nkitahodi a ɛfata nso hwehwɛ sɛ wɔkyerɛkyerɛ nneɛma a wɔakyerɛkyerɛ mu, ahobammɔ ne nea ɛne ne ho hyia ho adanse, adwumayɛ sɔhwɛ, batch control ne nkrataa a wɔhwehwɛ wɔ baabi a wɔrekɔ gua ne nnuru-afiri dossier.

So wobetumi asan de nnuru a wɔde yɛ PVC sini adi dwuma?

Ebia wobetumi asan de PVC a wɔde yɛ nneɛma a ɛho tew a ɛyɛ den no adi dwuma bio wɔ baabi a mmeae a ɛfata wɔ. Ɛyɛ den sɛ wɔbɛsan de nnuru a wɔde yɛ akisikuru a wɔde adi dwuma no adi dwuma bio wɔ gua pii so efisɛ ɛka plastic ne aluminium bom na ebia nnuru nkae wom. Ɛsɛ sɛ wɔhwɛ mpɔtam hɔ nneɛma a wɔboaboa ano ho mmara mu.

So PVC aduruyɛ krataa no tumi sɛe nneɛma a nkwa wom?

Dabi, PVC a wɔtaa de di dwuma no ntumi sɛe nneɛma a nkwa wom anaasɛ wotumi de gu fie. Ɛsɛ sɛ nneɛma a atwa yɛn ho ahyia ho nsɛm a wɔka no twe adwene si nneɛma a wɔtew so a wɔagye atom, nneɛma a wɔsɛe no a wɔsan nya, nhyehyɛe a wɔde boaboa ano anaa adan foforo a wɔagye atom so.

Dɛn ne dodow a ɛba fam koraa a wɔkra?

HSQY nneɛma nkratafa taa kyerɛw MOQ a ɛbɛyɛ 1000–2000 kg, a egyina nhyehyɛe, ne tɛtrɛtɛ, ne kɛse, kɔla ne nkrataa a wɔhwehwɛ so. PVDC coating weights a wɔahyɛ da ayɛ anaasɛ specialty formulations betumi ahwehwɛ dodow soronko.

So HSQY betumi de nnuru a wɔde yɛ PVC film nhwɛsode ama?

Aane. Wobetumi asusuw nhwɛsode anaa sɔhwɛ nhoma mmobɔwee ho ama mfiri akyidi, abura a wɔhyehyɛ, ɔhyew a wɔde hyɛ mu, akuturuku, aniwa su ne nneɛma a wɔde ahyɛ mu no mudi mu kura. Fa mprempren nkyerɛkyerɛmu ne blister-machine ho nsɛm ma na ama nhwɛsode a wɔpaw no atu mpɔn.

Nsɛm bɛn na ehia ma asɛm bi a wɔafa aka?

Fa sini nhyehyɛe, ne kɛse, ne trɛw, ne roll diameter, core, kɔla, coating mu duru, cavity bun, mfiri model, lidding foil, mmara gua, nkrataa a wɔhwehwɛ, sɔhwɛ dodow ne afe afe ahwehwɛde ma.