HSQY 0.5mm Clear Thin PETG Plastic Sheet 7 Bonya ka sugandi

0,5mm PETG sɛbɛn jɛlen ka ɲɛsin Blister Packaging ma

HSQY 0,5mm jɛlen PETG sɛbɛn ye kopoliyetɛri sɛbɛn ye min bɛ yeelen bɔ ni glycol ye, min dilannen don kurukuruw pakew kama, ka fɛnɲɛnamafagalanw dilan, ka thermoforming kɛ, ka pake jɛlenw kɛ, ka lakana datugulanw ani plastiki dilannenw yɔrɔ nɔgɔmanw.

Ni a janya tɔgɔ ye ko 0,5mm, walima mikron 500, PETG bɛ balansi nafama di kɛnɛya, gɛlɛya, sɛgɛsɛgɛli ani foroko baarakɛcogo la. A bɛnnen don kɛrɛnkɛrɛnnenya la kurukuruw ma minnu dilannen don ni funteni ye ani yɔrɔ minnu dilannen don ni u girinya ka nɔgɔn, yɔrɔ minnu na fura yecogo ni u hakɛ ɲɔgɔndɛmɛ nafa ka bon.

HSQY bɛ PETG di sɛbɛnw ni rollo cogo la. Sisan fɛn dilannenw kunnafoniw bɛ rollo bonya jira k’a ta milimɛtɛrɛ 110 ɲɔgɔn na ka se milimɛtɛrɛ 1280 ma, sɛbɛnw minnu bɛ kɛ ka kɛɲɛ ni 915 × 1220mm ani 1000 × 2000mm ye, ani hakɛ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye izini fɛn caman tigɛli porozɛw kama.

PETG janya wɛrɛ minnu bɛ bɔ milimɛtɛrɛ 0,15 na ka se milimɛtɛrɛ 7 ma, olu kofɔlen don sisan fɛn dilannenw kunnafoniw kɔnɔ. A sɔrɔli ka kan ka dafa ka kɛɲɛ ni a bonya ye, a janya walima a sɛbɛnfura cogoya, a foroko wajibiyalen ani a komandi hakɛ.

PETG ka kunnafonidilan fɛɛrɛbɔsɛbɛn

PETG ka fɛɛrɛbɔsɛbɛn min bɛ sɔrɔ, o telesarse walasa ka kunnafoni sɔrɔ. Sannikɛlaw ka kan k’a jira ko sɛbɛn in bɛ tali kɛ PETG resin hakɛ tigitigi la, a bonya, a sanfɛla ani a ɲɛfɔcogo min bɛ fɔ.

PETG sɛbɛn jɛlen ye mun ye?

PETG ye kopoliyesitɛri ye min sɛgɛsɛgɛra ni glycol ye, a ni PET bɛ tali kɛ ɲɔgɔn na. Glikɔli caman cili bɛ kristali kɛcogo Changer ani ka PETG dɛmɛ ka kɛnɛya ni gɛlɛya nafama mara thermoforming ni fabrication baara caman senfɛ.

A ka c’a la, PETG jɛlen bɛ sugandi yɔrɔ minnu na, thermoplastique transparent ka kan ka dilan ni vacuum ye, ka degun kɛ, ka tigɛ, ka die tigɛ, ka punch, ka sɔgɔ, ka sira bila, ka sɛbɛn, ka kuru walima ka siri.

Ni i y’a suma ni akiriliki kɔrɔlen ye, a ka c’a la, PETG bɛ se ka sɔgɔsɔgɔninjɛ ni karilenw kɛlɛ kosɛbɛ fɛn dilanni baara caman senfɛ. Ni an y’a suma ni APET sariyalen ye, PETG nafa ka bon kɛrɛnkɛrɛnnenya la yɔrɔ minnu na a dilanni nɔgɔya ani a ka kristali dɔgɔyali baara kɛtuma na, o nafa ka bon.

0.5mm PETG sɛbɛn ɲɛfɔli jɛlenw

Sisan, siti in kɔnɔ, a janya danfaralenw bɛ sɔrɔ nin fɛn in ɲɛ yɔrɔw la. Sani a ka bɔ kɛnɛ kan, HSQY ka kan ka a bonya hakɛ tigitigi min bɛ sɔrɔ, o sɛmɛntiya ani ka fɛn dilannenw cogoyaw, u ɲɛfɔli ani u ka fɛn dilannenw sɛgɛsɛgɛli kɛ cogo kelen na.

Mun na aw bɛ 0,5mm PETG sɛbɛn sugandi?

Balance de Flexibilité ani Rigidité

Ni a janya ye milimɛtɛrɛ 0,5 ye, PETG bɛ to ka wuli ka bɔ a nɔ na k’a sɔrɔ a bɛ farikolo ni hakɛ sabatili di ka tɛmɛ pakew filimuw kan minnu ka fin kosɛbɛ. O b’a to a nafa ka bon foroko dilannenw na minnu girinya ka nɔgɔn, datugulan jɛlenw ani kurukuruw yɔrɔw.

Fɛn dilannenw yecogo ka bon

PETG jɛlen bɛ kɛnɛyaba di feerekɛyɔrɔw ka pakew ma ani fɛn dilannenw ma, yɔrɔ minnu na fɛn dilannen ka kan ka to yelen na plastiki fɛ.

Termoforming (Tɛrmoforming) baarakɛcogo

PETG bɛ kɛ ka caya thermoforming kama bawo kalasi bɛnnenw bɛ se ka mɔbili jateminɛcogo ɲɛfɔlenw lasegin ka sɔrɔ ka jɛya ni gɛlɛya nafama mara.

A bɛ se ka Chipping ni Cracking kɛlɛ

PETG bɛ gɛlɛya nafama di caman na tigɛ, sɔgɔli ani fɛn dilanni waati, o bɛ dɛmɛ ka dɔ bɔ sɔgɔsɔgɔninjɛ nɔgɔlenw na ni i y’a suma ni plastiki jɛlenw ye minnu ka gɛlɛn kosɛbɛ fɛn dilanni baara caman na.

Sheet and Roll Supply (Fɛɛrɛ ni sɛbɛnfura).

0,5mm PETG bɛ se ka kɛ fɛn ye min bɛ bɛn sɛbɛnfura ni roll-fed jiginni ma ka kɛɲɛ ni masinw dilanni ye, o b’a to sannikɛlaw bɛ se ka sɔrɔcogo dɔ sugandi min bɛ bɛn duguma taabolo ma.

0,5mm PETG sɛbɛn min bɛ kɛ ka Blister Packaging kɛ

Blister packaging bɛ baara kɛ ni web transparent formée ye walasa ka cavité dɔ da fɛn dɔ lamini na. PETG jɛlen bɛ se ka jateminɛ i n’a fɔ fɛn min bɛ kɛ ka fɛnɲɛnamafagalanw dilan feerekɛyɔrɔw la, yɔrɔ minnu na kɛnɛya, nɔgɔ ɲɛfɔli ani u ka se ka kari dilan waati la, o nafa ka bon.

Ni a daminɛ janya ye milimɛtɛrɛ 0,5 ye, PETG bɛ tali kɛ kɛrɛnkɛrɛnnenya la kurukuruw yɔrɔw la minnu ka nɔgɔn ani minnu ka dun. A laban bɛnnenya bɛ bɔ dingɛ dunuya la, ja hakɛ, nkɔni janya, fɛn dilannen girinya ani kogo laban janya wajibiyalen.

Blister pakew bɛ se ka baara kɛ ni dadoncogo wɛrɛw ye, i n’a fɔ karti sirili, masin minɛni, clamshell suguya dilancogo walima pakew sigicogo wɛrɛw. Sigili bɛnkan ka kan ka jateminɛ ka kɛɲɛ ni finimugu yɛrɛyɛrɛ ye, nɔrɔlan, substrat ani minɛnw sanni ka miiri ko PETG sɛbɛn kelen-kelen bɛɛ bɛ sigi kɔfɛfɛn bɛɛ la.

PETG sɛbɛn min bɛ kɛ ka Vacuum Forming (Vacuum Forming) kɛ

Vacuum forming bɛ PETG sumaya fo a ka kɛ formable ye, o kɔfɛ a bɛ vacuum kɛ ka sɛbɛn in sama ka kɛ moulu dɔ kan. PETG bɛ sugandi tuma caman na bawo kalasi bɛnnenw bɛ se ka kɛ cogoya caman ye k’a sɔrɔ u ma kɛ ni fɛn tiɲɛnenw ye minnu bɛ tali kɛ plastiki jɛlen dɔw la.

Vacuum-forming parameters nafamaw ye funteni kelen-kelen ye, sheet temperature, vacuum level, mold design, draft angle, corner radius, forming depth ani cooling conditions.

Ni a kɛra ka dun, o bɛ sɛbɛnfura lamaga ani ka sigida kogo janya dɔgɔya. O la, daminɛ sɛbɛn min janya ye milimɛtɛrɛ 0,5 ye, o bɛ se ka bɛn a dilanni ma min man dun walima a dilanni cɛmancɛ la nka a bɛ se ka kɛ a ka fin kojugu ka ɲɛsin dingɛ juguman ma min bɛ kogo dafalen gɛlɛnba de wajibiya.

Thermoforming 0,5mm PETG sɛbɛnfura

PETG bɛ se ka kɛ fɛnɲɛnamafagalan dilanni na, degun dilanni na ani funteni sɛnɛcogo wɛrɛw la ni a hakɛ sugandilen, funteni cogoya ani mɔbili dilanni bɛnnen don.

PETG thermoforming grade caman dabɔra ka baara kɛ ni predrying step danfaralen tɛ ni u maralen don ani ni u minɛna ka ɲɛ, nka o man kan ka jate diɲɛ bɛɛ ka sariya ye. Aw bɛ baarakɛcogo ɲɛfɔli labato resin hakɛ tigitigi kan ani ka sɛbɛnfura cogoya lajɛ sani aw ka a dilan.

A ka ca a la, farikolo tangalanw ka kan ka lajɛ sani a ka kɛ funteni ye min bɛ kɛ. Aw bɛ masike bɔ foroko yɔrɔ sumalen na fo ni masike dilanbaga y’a jira ko a bɛ bɛn ni funteni kɛcogo laɲininen ye.

Mun de bɛ PETG sigicogo ɲuman dantigɛ?

0.5mm PETG Sheet Fɛn dilannen ni baarakɛcogo ja

PETG ni APET ni PVC ka ɲɛsin Blister Packaging ma

Fɛn min ka fisa, o bɛ bɔ kurukuruw dilanni dafalen na, a dilanni juguya, kɛnɛya wajibiyalen, a gɛlɛya, a nɔfɛta kɛcogo, a sɛbɛnni walima a datugucogo, sariyaw ka wajibiw ani a musaka laɲinitaw.

Tigɛ, Die Tigɛ ani Fabrication

Tigɛtigɛ

PETG sɛbɛn finmanw bɛ se ka tigɛ ni gilotini bɛnnenw ye, ni muru nɔgɔlenw ye, ni sɔgɔlanw ye walima ni izini tigɛminɛnw ye ka kɛɲɛ ni u hakɛ ni u bonya wajibiyalenw ye.

Die Tigɛ ni Punching

0,5mm PETG bɛ se ka jateminɛ ka kɛ die tigɛcogo ni punching ye pakew, dondaw, datugulanw ani sɛbɛnw kɔnɔ. Baarakɛminɛnw jateminɛcogo ni u janya ka kan ka bɛn sɛbɛnfura janya ma.

Drilling ani Routing (Bɔli ni siraw tigɛcogo).

PETG bɛ se ka sɔgɔ ani ka sira bila sira kan ni baarakɛminɛn bɛnnenw ye. Aw bɛ sɛbɛnfura dɛmɛ ka ɲɛ ani ka funteni bɔli kɔlɔsi walasa ka dɔ bɔ a wulicogo la, a dakun gɛlɛnw walima a tigɛli la.

Bonding (Jɛɲɔgɔnya) (Bonding).

PETG bɛ se ka siri ni nɔrɔlan walima furajiw ye minnu bɛ bɛn ɲɔgɔn ma, nka kemikaliya bɛnkan, a cogoya ani a joli fanga ka kan ka sɛgɛsɛgɛ PETG hakɛ tigitigi kan sani a ka dilan.

PETG sɛbɛn bɔli ni a masirili

PETG jɛlen bɛ se ka kɛ ka pake sɛbɛnnenw kɛ, feerelikɛyɔrɔw jiralanw, ja yɔrɔw ani yɔrɔ jɛlenw masirilenw. Écran printing, UV digital printing ani fɛɛrɛ wɛrɛw bɛ se ka kɛ ka kɛɲɛ ni sɛbɛnfura yɔrɔ sugandilen ye ani encre system.

Sani aw ka fɛn caman dilan, aw bɛ enki nɔrɔli, a kɛnɛyali funteni, a sɔgɔsɔgɔli, a kɔrɔtacogo ani a thermoforming sɛgɛsɛgɛ ni sɛbɛnni kɛra sani a ka dilan. Enki sitɛmu minnu bɛ baara kɛ ka ɲɛ sɛbɛnfura fla kan, olu bɛ se ka kɛ cogo wɛrɛ la PETG sɛbɛnnen sɔgɔlen kɔfɛ mɔbili kan.

Ɲɛkisɛw ka jogoɲumanya wajibiyalenw

'Clear PETG' dɔrɔn tɛ ɲɛnayeli wajibiyalenw bɛɛ ɲɛfɔ. Ka ɲɛsin pakew walima jiracogo baarakɛcogo ma, yɔrɔ minnu na yecogo ka ɲi kosɛbɛ, sannikɛlaw ka kan ka yeelen bɔli, sisi, kɛnɛya, tint ani surface-defect danw jira minnu bɛ sɔn.

Maskɛ min bɛ mɔgɔ tanga, o bɛ se ka dɛmɛ ka sɔgɔsɔgɔninjɛ bali a minɛcogo ni a dilanni senfɛ. Ni masike ka kan ka kɛ, aw bɛ fan kelen walima fan fila lakanani ɲɛfɔ ani ni sɛbɛnfura bɛna sɛbɛn kɔfɛ, ka dilan walima ka lamini.

Yala PETG bɛnnen don kɛnɛyako ma wa?

Standard clear PETG man kan ka fɔ a yɛrɛma ko kɛnɛma walima UV-resistant sɛbɛn min bɛ mɛn sen na. Ni aw bɛ tile yeelen ni waati jan kɛ, o bɛ se ka nɔ bila a yecogo ni a kɛcogo la ka kɛɲɛ ni PETG hakɛ ye.

Ni fɛn dilannen bɛna kɛ kɛnɛma, aw bɛ baara kɛ waati makɔnɔnen, dugukolo yɔrɔ, UV bɔli ani sigida cogoyaw fɔ. UV-stabilized walima UV-protected grade ka kan ka sugandi ni a mago bɛ a la ani ka dɛmɛ sɔrɔ ni fɛɛrɛ sɛbɛnw ye minnu bɛ sirataama.

Yala PETG bɛnnen don dumuniko la wa?

PETG resin suguya dɔw bɛ dilan dumuni na, nka dumuni ni ɲɔgɔn cɛ bɛnnen man kan ka jate PETG furakɛcogo, kulɛri walima farali foroko bɛɛ la.

Dumuni foroko ta fan fɛ, aw bɛ taa sugu min na, dumuni suguya, a sɔrɔcogo funteni ani a kuntaala di. HSQY ka kan ka sɛbɛnw dafa minnu bɛ tali kɛ resin ni sɛbɛnfura tigitigiw la minnu bɛ di.

0,5mm Clear PETG Sheet (PETG sɛbɛn jɛlen) kɛcogo

Retail Blister Packaging (Blister ka foroko).

PETG blister yɔrɔ jɛlenw bɛ se ka fɛnw yecogo ɲuman di fɛnɲɛnamafagalanw, ɛntɛrinɛti fɛnw, ɲɛgɛnw, sɛbɛnnikɛlanw, tulonkɛfɛnw ani feerefɛn wɛrɛw ma.

Foroko minnu bɛ kɛ ni vacuum ye

PETG bɛ se ka kɛ sanubɔlanw ye minnu dilannen don ni kɛnɛya ye minnu ka nɔgɔn, fɛnw dontaw, datugulanw ani fɛnw minɛyɔrɔw ni u dilanni juguya ani kogo laban janya bɛnnen don 0,5mm daminɛfɛnw ma.

Prototype (Prototype) ka foroko

PETG sɛbɛn tigɛlenw nafa ka bon pakew dilanni kɔrɔbɔliw la, mɔbili sɛgɛsɛgɛli la ani prototype thermoforming sanni ka sɔn ka dilan baarakɛminɛnw ni sɛbɛn labanw ɲɛfɔ.

Datugulan ni Garadiw jɛlenw

PETG finman bɛ se ka jateminɛ datugulan jɛlenw na minnu ka nɔgɔn, garadiw, datugulanw ani lakananifɛnw na yɔrɔ minnu na 0,5mm janya bɛ gɛlɛya bɛrɛ di.

Sɛbɛnni ni jirali yɔrɔw

PETG jɛlen fana bɛ se ka jateminɛ kɛ so kɔnɔ jiracogo yɔrɔw la, sɛbɛnw dacogo kan, taamasiyɛnw yɔrɔw ani ja pannew jɛlenw.

PETG sɛbɛn ɲuman sugandicogo

1. Aw bɛ Daminɛ janya dafa

Aw bɛ a lajɛ ni milimɛtɛrɛ 0,5 bɛ kogo dafalen janya bɛrɛ di a dilanni kɔfɛ. A ka c’a la, dingɛ minnu ka dun, olu bɛ daminɛfɛn caman de wajibiya.

2. Aw bɛ Sheet walima Roll kofɔ

Layini minnu bɛ to ka kɛ ni thermoforming ye, olu bɛ se ka baara kɛ ni roll stock ye, ka sɔrɔ prototype baara, bolola forming ani sheet-fed systems bɛ se ka kɛ ni sɛbɛn fla tigɛlenw ye.

3. Aw bɛ ɲɛfɔli kɛ ɲɛnayeli wajibiyalen kan

Aw bɛ jɛya, sisi, kɛnɛya, tint ani yɔrɔ nafamafɛnw ɲɛfɔ minnu bɛ se ka kɛ ni yecogo ka gɛlɛn kosɛbɛ.

4. Aw bɛ Blister walima Mold Ja di

Nɔgɔ hakɛ, a kɔnɔna juguya, a nkɔni janya ani a jiginni kɛrɛw bɛ dɛmɛ k’a dɔn ni 0,5mm PETG bɛnnen don.

5. Aw bɛ Jiginni baarakɛcogo dafa

Aw bɛ a fɔ HSQY ye ni o fɛn bɛna sɛbɛn, ka datugu, ka lamini, ka nɔrɔ, ka die tigɛ walima ka siri fɛn wɛrɛ la.

6. Ka sariyaw ka wajibiw dafa

Dumuni tali, furakɛli, tasuma-fagalan, antistatique ani sariya wɛrɛw walima baarakɛcogo wajibiyalenw mago bɛ jate kɛrɛnkɛrɛnnen na min bɛ se ka kɛ ani sɛbɛnw ye minnu bɛ tali kɛ o la.

PETG sɛbɛn ni rollo sugandiliw ka kɛɲɛ ni mɔgɔw sago ye

• 0,5mm / 500μm ye a janya jira.

• PETG janya wɛrɛw bɛ kɛ ka kɛɲɛ ni u dilanni dafalen ye.

• Custom slit roll bonya.

• Ladamu sɛbɛn janya ni a bonya.

• PETG sɛbɛnw tigɛlenw ka kɛɲɛ ni u bonya ye.

• Kulɛri jɛlenw ani minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Fɛnɲɛnɛmafagalan min bɛ kɛ fan kelen walima fan fila fɛ.

• Optique wajibiyalenw i n’a fɔ haze ani transmission targets.

• Printing-grade (sɛbɛnni-kalan) fɛnw ɲɛfɔcogo.

• Dumuni-sɔrɔ-PETG jatew ni sɛbɛnw bɛ tali kɛ u la yɔrɔ minnu na.

• UV kɛrɛnkɛrɛnnenw, antistatic walima baarakɛcogo wɛrɛw ka kɛɲɛ ni setigiya ye.

• Custom export packaging ani palɛti taamasiyɛn.

Kunnafoni minnu ka kan ka kɛ PETG sɛbɛnfura Quote kama

• A janya wajibiyalen don.

• Sheet dimensions walima roll bonya.

• Muɲuli hakɛlama wajibiyalen don.

• Rollo core hakɛ ani roll diameter maksimali ni roll stock de wajibiyalen don.

• Kulɛri jɛlen walima min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Ɲɛkisɛ jɛlen wajibiyalen, sisi walima kɛnɛya.

• Fɛn kelen walima fan fila lakanani masike wajibiyalen.

• Blister walima thermoformed-part ja.

• Cavity depth ani draw ratio ni a dɔnna.

• Vacuum-forming walima thermoforming machine model.

• Sɛbɛnni, finimugu, sirili walima sirili wajibiyalen.

• Dumuni-ɲɔgɔn-ɲini walima sariya wɛrɛw.

• Koman hakɛ ani san o san a tacogo.

• Pake ni palɛti wajibiyalenw.

• A taayɔrɔ jamana ani kurunbonkarila.

Seereyaw ni Tekniki sɛbɛnw

Seere ja min bɛ duguma, o bɛ mara ka bɔ fɛn dilannen ɲɛ fɔlɔ la. Sannikɛlaw ka kan ka seereyaw bɔcogo sisan, a bɔli jɛkulu, a tiɲɛni ani a bonya dafa sanni u k’u jigi da a kan komandi kɛrɛnkɛrɛnnen dɔ kama.

Jogoɲumanya-sɛgɛsɛgɛli bɛɛ lajɛlen tɛ dumuniko, furakɛli, UV, tasuma-fagalan walima baarakɛcogo kɛrɛnkɛrɛnnen wɛrɛw labatoli jira a yɛrɛma. Aw bɛ sɛbɛnw ɲini PETG hakɛ tigitigi kan, o wajibiw bɛ sirataama yɔrɔ min na.

HSQY Plastiki Jɛkulu ka jirali

Ɲɛjirali ja fɔlɔ bɛ mara jukɔrɔ. HSQY bɛ a sen don izini jirali la walasa ka baro kɛ PETG, PET, PVC ani plastiki sɛbɛnw ni pakew dilanni porozɛ wɛrɛw kan ni diɲɛ sannikɛlaw ye.

PETG Sheet Packing ani a lasecogo

Ɲininkali minnu bɛ kɛ tuma caman na 0,5mm PETG sɛbɛn kan

0,5mm PETG sɛbɛn ye mun ye?

O ye kopoliyetɛri sɛbɛn jɛlen ye min sɛgɛsɛgɛra ni glycol ye, a janya tɔgɔla ye milimɛtɛrɛ 0,5 ye, o bɛ bɛn mikron 500 ma. A bɛ se ka kɛ kurukuruw pakew dilanni na, ka fɛnɲɛnamafagalanw dilan, ka funteni kɛ ani ka fɛnw kɛ minnu ka nɔgɔn.

Yala 0,5mm PETG bɛnnen don blister pakew ma wa?

Ɔwɔ, 0,5mm PETG bɛ se ka jateminɛ walasa ka kurukuruw foroko jɛlenw sɔrɔ. A bɛnnen don, o bɛ bɔ dingɛ kɔnɔna juguya la, fɛn dilannen girinya, nɔgɔ jateminɛcogo ani kogo dafalen janya wajibiyalen.

Yala 0,5mm PETG bɛ se ka dilan ni vacuum ye wa?

Awɔ. PETG hakɛ bɛnnenw bɛ se ka kɛ ni vacuum ye ka kɛ blister packs ye, datugulan jɛlenw, pakew dontaw ani fɛn wɛrɛw dilannenw minnu ka nɔgɔn.

0,5mm janya ye joli ye mikron na?

0,5mm bɛ bɛn mikron 500 ma.

Sɛbɛn hakɛ jumɛnw bɛ sɔrɔ?

Sisan fɛn dilannenw kunnafoniw bɛ sariyasɛbɛnw jira minnu kɔnɔ 915 × 1220mm ani 1000 × 2000mm bɛ yen. Ladamu tigɛ hakɛw fana bɛ se ka baro kɛ.

Yala PETG bɛ se ka dilan rollow kɔnɔ wa?

Awɔ. Sisan HSQY ka fɛn dilannenw kunnafoniw bɛ rollo bonya jira ka bɔ milimɛtɛrɛ 110 ɲɔgɔn na ka se milimɛtɛrɛ 1280 ma. A sɔrɔli laban bɛ bɔ a janya la, a roll OD, a kɔnɔna hakɛ ani a dilanni wajibiyalenw.

Yala PETG ka kan ka jalen ɲɛfɛ sani a ka kɛ thermoforming ye wa?

PETG thermoforming grade caman bɛ se ka baara kɛ k’a sɔrɔ u ma jalen kɛ ka kɔn u ɲɛ ni u maralen don ka ɲɛ, nka o bɛ bɔ grade ni cogoya la. Aw bɛ fɛɛrɛko laadilikanw labato PETG resin tigitigi min bɛ di.

Ne ka kan ka funteni jumɛn kɛ walasa ka PETG thermoformer?

Foroko funteni ɲuman bɛ bɔ PETG hakɛ la, sɛbɛnfura janya, funteni kɛcogo, mɔli, ja juguya ani cycle waati. Aw bɛ baara kɛ ni baarakɛcogo gafe ye min bɛ kɛ ni kalasi kɛrɛnkɛrɛnnenw ye ani ka a dilanni kɔrɔbɔliw kɛ sanni ka diɲɛ bɛɛ ka funteni kelen kɛ.

Yala PETG bɛ se ka die cut wa?

Awɔ. PETG finman bɛ se ka tigɛ ka sa ka a sɔgɔ ni baarakɛminɛn bɛnnenw ye. Baarakɛminɛnw bɔli ni die geometry ka kan ka bɛn ni sɛbɛnfura janya ni a yɔrɔ dilanni ye.

Yala PETG bɛ se ka sɛbɛn wa?

PETG sɛbɛn sugandilenw bɛ se ka sɛbɛn ekran kan, ka sɛbɛn nizɛrikan na walima ka u masiri ni enki ni baarakɛcogo ye minnu bɛ bɛn ɲɔgɔn ma. Sɛbɛnni nɔrɔli ni a dilanni baarakɛcogo ka kan ka sɛgɛsɛgɛ sani a ka dilan.

Yala PETG bɛnnen don kɛnɛma taamasiyɛnw ma wa?

PETG standard man kan ka jate a yɛrɛma i n’a fɔ kɛnɛma sɛbɛn min bɛ mɛn sen na. Kɛnɛma porozɛw ka kan ka baara kɛ ni UV-stable walima UV-protected grade ye min bɛ bɛn waati cogoya ni baarakɛcogo wajibiyalen ma.

Yala PETG bɛnnen don dumunifɛnw foroko ma wa?

PETG hakɛ dɔw bɛ se ka bɛn dumuni ni ɲɔgɔn cɛ baarakɛcogo ma. HSQY ka kan ka resin hakɛ tigitigi ni sɛbɛnw dafa minnu bɛ tali kɛ a taayɔrɔ sugu la ani ɲɔgɔnkanu cogoya laɲininenw na.

Danfara jumɛn bɛ PETG ni APET cɛ?

U fila bɛɛ bɛ se ka kɛnɛyakoba di. PETG ka glycol caman cili nafa ka bon kɛrɛnkɛrɛnnenya la yɔrɔ minnu na, funteni nɔgɔyali, a gɛlɛya ani a ka se ka degun finman walima a karilen kɛlɛ a dilanni senfɛ, olu ye fɔlɔfɔlɔw ye, k’a sɔrɔ APET bɛ kɛ ka caya thermoformed pake gɛlɛnw kɔnɔ, yɔrɔ minnu na, a gɛlɛya ni musaka nafa ka bon.

Yala PETG hakɛw bɛ se ka dilan ka kɛɲɛ ni mɔgɔw sago ye wa?

Awɔ. Laada tigɛ sɛbɛnw ani slit roll widths bɛ se ka baro kɛ ka kɛɲɛ ni u bonya, u bonya, u muɲuni ani u komandi hakɛ ye.

MOQ ye mun ye?

Sisan siti in ɲɛfɔli bɛ MOQ jira min ye kilo 1000 ye. Kulɛri kɛrɛnkɛrɛnnenw, baarakɛcogo jatew walima fɛn caman tigɛli minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu hakɛ fitininw bɛ se ka kɛ danfara ye.

Yala PETG misaliw bɛ sɔrɔ wa?

Misaliw sɔrɔli bɛ se ka kuma PETG sɛgɛsɛgɛli kɛlenw kan minnu bɛ yen. Walasa ka kurukuruw foroko ni funteni-porozew kɛ, u ka kan ka sɛgɛsɛgɛli kɛ ni fɛn dilanni masin yɛrɛ ye ani nɔgɔ sani u ka sɔn ka caya.

Kunnafoni jumɛnw de ka kan ka kɛ walasa ka quotation sɔrɔ?

Aw bɛ a janya, sɛbɛnfura walima rollo hakɛw, ɲɛnayeli wajibiyalenw, foroko juguya, blister ja, pake-masin kunnafoniw, lakanani masking, baarakɛcogo wajibiyalenw, komandi hakɛ ani taayɔrɔ jamana di.

Mun na aw bɛ HSQY 0.5mm PETG sɛbɛn sugandi?

HSQY bɛ PETG sɛbɛn jɛlen ni filimu di walasa ka blister pakew dilan, ka vacuum dilan, ka thermoforming kɛ, ka sɛbɛnni kɛ, ka jira ani ka izini caman tigɛli baara wɛrɛw kɛ.

Sisan fɛn dilannenw sɔrɔyɔrɔ bɛ tali kɛ fɛn dilanni sira duuru la ani don o don seko tɔni 50 ɲɔgɔn na. Sɛnɛfɛnw dilanni waati bolodacogo PETG janya, a bonya, a kulɛri walima a hakɛ kɛrɛnkɛrɛnnen dɔ kama, o ka kan ka dafa quotation waati.

Ni aw bɛ blister pake porozew kɛ, aw bɛ aw ka blister ja dafalen ci HSQY ma, forming depth, current material specification ani machine information. O b’a to PETG daminɛ janya, sɛbɛnfura walima rollo hakɛw ani fɛnw hakɛ bɛ se ka jateminɛ ka kɛɲɛ ni foroko dafalen wajibiyalen ye.