Frosted Pvc Thin Plastiki fèy

Frosted PVC Fini Plastiki fèy Dilanbaga

HSQY bɛ plastiki finmanw PVC sɛbɛnfura min bɛ kɛ s ani matte rigid PVC filimuw dilan walasa ka sɛbɛnni kɛ, ka kɛsu foli, blister pakew, sɛbɛnnikɛlanw, kartiw, feerekɛyɔrɔw jiralanw, panɛriw masirilenw ani izini jiginni.

A janya minnu bɛ sɔrɔ, olu bɛ daminɛ 0,06mm ɲɔgɔn na ka se 2mm ma. Sɛgɛsɛgɛli finmanw bɛ se ka dilan i n’a fɔ rollo walima tigɛ sɛbɛnfura min bɛ kɛ s, k’a sɔrɔ fɛn ɲɛfɔlen finmanw bɛ dilan caman na i n’a fɔ sɛbɛnfura min bɛ kɛ s fla ka kɛɲɛ ni bonya, janya ani sanfɛla dafalen wajibiyalen ye.

O yɔrɔ min bɛ kɛ ni nɛnɛ ye, o bɛ dɔ bɔ yeelen tilennen na, ka bolokɔnincininw yelenw jigin ani ka ɲɛda cogoya dɔ dilan min bɛ yeelen bɔ ka sɔrɔ ka yeelen min bɛ na, o yɔrɔ dɔ bɛ tɛmɛ.

Surface faralen ɲɔgɔn kan minnu bɛ sɔrɔ, olu ye matte/matte, matte/glossy, fine frosted, coarse frosted, velvet/matte, embossed ani customized textured finishes ye.

Kulɛri jɔnjɔnw ye kulɛri jɛlenw ye minnu bɛ kɛ ni nɛnɛ ye, minnu bɛ yeelen bɔ ani kulɛri jɛlenw sugandilenw. Kulɛri finman, nɛrɛma ani kulɛri minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu fana bɛ se ka jateminɛ ka kɛɲɛ ni u bonya wajibiyalen ye ani u ka komandi hakɛ.

Sɛbɛnni, foli-kɛsu, thermoforming, UV-stabilisé, antistatique ani tasuma-retardant PVC sɛbɛnfura min bɛ kɛ s bɛ furakɛlicogo kɛrɛnkɛrɛnnenw de wajibiya. O nafolo ninnu ka kan ka don fɛn ɲɛfɔlen kɔnɔ min dabɔra sanni ka miiri ko frosted PVC grade bɛɛ la.

Ni aw b’a fɛ ka sɛbɛnw sɔrɔ minnu bɛ se ka sɛbɛn minnu bɛ tali kɛ ɲɔgɔn na, aw ye... HSQY PVC sɛbɛnni sɛbɛnfura min bɛ kɛ hakɛ.

Demand Frosted PVC sɛbɛnfura Sɔngɔko    Surface Samples ɲini

Frosted PVC Fini Plastiki fèy ye mun ye ?

Plastiki finman PVC sɛbɛnfura min bɛ kɛ ye polivinili kuloridi fɛn gɛlɛn walima a tilancɛ gɛlɛn ye min ɲɛda bɛ kɛ ni fɛn ye min bɛ yeelen bɔlenw ni yeelen cilenw jɛnsɛn.

A tɛ i n’a fɔ PVC jɛlen polisilen , nɛnɛ yɔrɔ bɛ yeelen dɔgɔya ani ka yecogo tilennen dɔgɔya sɛbɛnfura min bɛ kɛ fɛ.

Ka kɛɲɛ ni a dilanni kɛcogo ye, o fɛn bɛ se ka kɛ nɛnɛ ye fan kelen fɛ walima a fan fila bɛɛ fɛ.

Kɛrɛ kelen frosted PVC bɛ yɔrɔ matte ni kɔfɛ fan nɔgɔlen walima glossier fara ɲɔgɔn kan, ka sɔrɔ frosted fan fila PVC bɛ texture low-gloss di surface fila bɛɛ kan.

Frosted PVC fana ɲɛfɔlen don ko matte PVC sɛbɛnfura min bɛ kɛ , translucent PVC filimu, sanded PVC sɛbɛnfura min bɛ kɛ , clear matte vinyl, rigid frosted vinyl ani textured transparent PVC filimu.

Frosted PVC sɛbɛnfura Jaw

Frosted PVC sɛbɛnfura Ɲɛfɔliw

A laban na, a janya muɲuni, a bonya, a ɲɛda cogoya, a yeelen, a sisi, a yeelen bɔli, a kulɛri, a gɛlɛya, a sɛbɛnni kɛcogo ani a kɛcogo kɛrɛnkɛrɛnnenw ka kan ka dafa sɛbɛn kɔnɔ min dabɔra.

PVC Filimu ni PVC Fɛn finman

O janya hakɛw ye sugandili siraw bɛɛ lajɛlen ye. Gɛlɛya, sɛgɛsɛgɛli ani foroko kɛcogo wajibiyalen bɛ bɔ PVC furakɛlicogo ni fɛn dilannenw dilanni na.

Fɛn kelen ni fan fila Frosted PVC

Yeelen Tɛmɛsira, Haze ani Privacy

Frosted PVC bɛ yeelen bila ka tɛmɛ ka sɔrɔ ka fɛnw yecogo dɔgɔya sɛbɛnfura min bɛ kɛ kɔfɛ .

Yeli jaabi yɛrɛ bɛ bɔ sɛbɛnfura min bɛ kɛ janya la, a sanfɛla gɛlɛya la, a ɲɛkisɛ la, a ni fɛn in cɛ janya, yeelen sira ani a fan kelen-kelen bɛɛ yeelen.

Sannikɛlaw minnu mago bɛ ɲɛnayeli kɛcogo kɔrɔsilen na, olu ka kan ka yeelenbɔcogo yelen, sisi, jɛya, kɛnɛya ani kulɛri caman ɲɔgɔnna min bɛ sɔn.

A general frosted finish tɛ a yɛrɛma ka gundo dafalen di, ka LED diffusion calibré walima garantie hotspot elimination.

Ka ɲɛsin gundolafɛnw ma, kiliyan ka kan ka misaliw jateminɛ u filɛli yɔrɔ la ani yeelen cogoya laɲininen na.

Sɛbɛnni kɛli Frosted kan PVC sɛbɛnfura

Frosted rigid PVC bɛ kɛ ka caya karti sɛbɛnnenw kama, fɛnw jiralanw, pakew, dumunifɛnw, fɛnw bilayɔrɔw taamasiyɛnw ani ja masirilenw.

Kunnafonidila ka kan ka enki kɛcogo yɛrɛ kɔrɔbɔ bawo sɛbɛnni kɛcogo bɛ se ka kɛ danfara ye fan min ye nɛnɛ ye ani fan min sɔgɔlen don.

Frosted PVC ka ɲɛsin kɛsu foli ma

Frosted PVC bɛ se ka die cut, scored ani foli kɛ translucent pake kɛsu kɔnɔ min bɛ kɛ ka ɲɛgɛnw, kadow, sɛbɛnnikɛlanw, ɛntɛrinɛti ani fɛnw laseli kɛ.

Fɛn min bɛ kɛ ni matte ye, o bɛ se ka dɔ bɔ bolokɔfɛfɛnw na ani ka ɲɛda cogoya nɔgɔya ka tɛmɛ pake jɛlenw kan minnu jɛlen don kosɛbɛ.

Foli kɛcogo bɛ bɔ a bonya la, resin dilanni, sɛbɛnfura min bɛ kɛ ɲɛsincogo, crease-rule hakɛw ani baarakɛcogo funteni.

Sɛnɛfɛnw dilanni misali ka kan ka jateminɛ ni foli finman, kari, spring-back, kola nɔrɔli ani ultrasonic walima high-frequency welding compatibility.

Frosted PVC ka ɲɛsin Blister Packaging ni Thermoforming ma

Thermoforming-grade frosted PVC bɛ se ka dilan ka kɛ blister packs ye, fura dontaw, datugulanw, sanubɔlanw ani decorative components.

Sumaya funteni, foroko waati, mɔli funteni, ja juguya, nɛnɛ ani sɛbɛnfura min bɛ kɛ ɲɛsincogo ka kan ka ɲɛ ka kɛɲɛ ni janya sugandilen ye.

Ja juguman bɛ se ka fɛn dɔw Changer (Yɛlɛma) frosted texture (jiri) cogoya n’a density (yɔrɔ) la, kɛrɛnkɛrɛnnenya la yɔrɔw la minnu bɛ sɔgɔsɔgɔ kosɛbɛ.

Sannikɛlaw ka kan ka yɔrɔ min dilannen don, o kɔrɔbɔ kogo-kɛnɛya tilali la, a jɛlenya caman ɲɔgɔnnabɔli, a kɛcogo maracogo ani a hakɛ sabatili.

Frosted PVC sɛbɛn finmanw kɛcogo

• Sɛbɛnni: Ja minnu bɛ fɛnw laseli kɛ, kartiw, menu, label, overlays ani point-of-purchase jiracogo.

• Box folilenw: Kosmɛtiki minnu bɛ yeelen bɔ, kado, sɛbɛnnikɛlan ani feerekɛyɔrɔw ka pakew.

• Blister packaging (Blister packaging): Fɛn minnu bɛ kɛ ni funteni ye, olu bɛ kɛ ka fɛnw, baarakɛminɛnw, ɛntɛrinɛti ani fɛn wɛrɛw kɛ.

• Sɛbɛnnifɛnw: Kaye ɲɛw, foli, tilayɔrɔw, rapɔɔri dakunw ani sɛbɛnw bɔrɔw.

• Fiyeere jiralanw: Taamaʃyɛnw, jiralanw, fɛnw jiralanw, fɛnw jiralanw ani fɛnw tilayɔrɔw.

• Panɛriw masirilenw: Mebɛri dontaw, lanpan yɔrɔw ani kɔnɔna masirifɛnw minnu bɛ yeelen bɔ.

• Kunnafoni minnu bɛ don mɔgɔ dogoyɔrɔw la: Panɛri minnu bɛ kɛ karamɔgɔya la walima minnu bɛ dɛmɛ, minnu bɛ yeelen ci ka sɔrɔ ka dɔ bɔ yecogo tilennen na.

• Industriw ka fɛn caman tigɛli: Die-cut components, protective overlays, liners ani custom formed parts.

Frosted PVC ni PET , PP ani Acrylic

So kɔnɔ, kɛnɛma ani kɛrɛnkɛrɛnnen PVC Kalansow

Standard frosted PVC man kan ka ɲɛfɔ a yɛrɛma ko a bɛ se ka kɛnɛma kudayi, a tɛ se ka wuli, a tɛ tasuma bɔ walima a bɛnnen don baarakɛcogo bɛɛ ma min bɛ kɛ ni sariya ye.

Tigɛ, Dilancogo ani Lakanali

• PVC finmanw bɛ se ka tigɛ ni sɔgɔlanw, muruw, sɔgɔlanw ani gilɔtini minɛn bɛnnenw ye.

• Sɛbɛnw bɛ se ka tigɛ ka sa, ka u sɔgɔ, ka u sɔgɔ ani ka u bila sira masin fɛ ni baarakɛminɛn bɛnnenw ye.

• Tigɛminɛn ka kan ka kɛ nɛrɛmuguma ye walasa ka dɔ bɔ burw, kari ani degun finmanw na.

• Score layiniw ni foli sira ka kan ka sɛgɛsɛgɛ sani foli-kɛsu ka dilan.

• Funteni dilanni ka kan ka kɛ ni funteni hakɛ ye min bɛ kɔrɔsi ani fiɲɛbɔcogo ɲuman.

• Bonding ni welding fɛɛrɛw ka kan ka sugandi ka kɛɲɛ ni PVC formulation ani application dafalen ye.

• PVC man kan ka baara kɛ ni laser tigɛlan gansanw ye walima ni laser jabɔminɛn gansanw ye.

Sɛgɛsɛgɛli minnu bɛ kɛ ka ɲɛsin jogoɲumanya kɔlɔsili ma

• PVC resin ni farali sɛgɛsɛgɛli.

• A bonya ni a bonya muɲuni.

• Bonya, janya ani diagonal muɲuli.

• Sheet flatness, roll curl ani winding jogo.

• Frosted texture kelen-kelen.

• Surface gloss ani roughness.

• Yeelen cili, sisi ani jɛya yɔrɔ minnu kofɔlen don.

• Kulɛri ni kulu ni kuluw ka ɲɔgɔndɛmɛ.

• Kristali yɔrɔw, bugunw, jibɔyɔrɔw, yɔrɔ nɛrɛmaw ani nɔgɔw.

• Tensile, impact ani folding baarakɛcogo.

• Printing adhesion ani scratch resistance.

• Die-cutting, scoring ani fold-whitening sɛgɛsɛgɛliw.

• Thermoforming ani dimension-stable sɛgɛsɛgɛliw.

• Antistatique sɛgɛsɛgɛli yɔrɔ minnu na a ka kan ka kɛ.

• UV-weathering sɛgɛsɛgɛli kɛli kɛnɛma kalataw kama.

• Tasuma-fanga-sɛgɛsɛgɛli tasuma-fagalan hakɛ kɛrɛnkɛrɛnnenw na.

• Protective-film nɔrɔli ni a bɔli sɛgɛsɛgɛliw.

• Pake, palɛti ani minɛnw doni sɛgɛsɛgɛli.

Custom Frosted PVC sɛbɛnfura Sugandiliw

• A janya bɛ daminɛ milimɛtɛrɛ 0,06 ɲɔgɔn na ka se milimɛtɛrɛ 2 ma.

• Master rolls, slit rolls ani fla sɛbɛnfura min bɛ kɛ s.

• sɛbɛnfura min bɛ kɛ hakɛw dantigɛlenw ani minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Kulɛri jɛlenw, nɛrɛmuguma minnu bɛ yeelen bɔ ani minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Fɛn minnu bɛ kɛ ni nɛnɛ ye fan kelen fɛ ani minnu bɛ kɛ ni nɛnɛ ye fan fila fɛ.

• Mate/mat, matte/glossy ani velours/mat faralen ɲɔgɔn kan.

• Frosted textures finmanw, cɛmancɛw ani gɛlɛnw.

• Sɛbɛnni, foli-kɛsu ani thermoforming grades.

• UV-stabilisé, antistatique ani tasuma-fagalan.

• Fɛn kelen walima fan fila lakanani filimu.

• Tigɛ-ka-bɔ, sɛbɛnfura min bɛ kɛ ing, slitting ani die-cutting baarakɛlaw.

• Labeliw, kartɔnw, palɛtiw ani cikan taamasiyɛnw minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

Kunnafoni minnu ka kan ka kɛ ka ɲɛsin Frosted PVC sɛbɛnfura Quote ma

• A ka kan ka kɛ a janya ni a muɲuni ye.

• Rollo bonya walima sɛbɛnfura min bɛ kɛ hakɛw.

• Roll, sɛbɛnfura min bɛ kɛ walima tigɛ-tigɛ-minɛnw dilancogo.

• Kulɛri jɛlen, fin, nɛrɛma walima min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Fɛn kelen walima fan fila frosted surface.

• Frosted texture finman, cɛmancɛ walima gɛlɛn.

• Yeelen cili wajibiyalen, sisi walima kɛnɛya.

• Sɛbɛnni minɛnw, enki ani furakɛli fɛɛrɛ.

• Foli, die-cutting walima thermoforming kɛcogo.

• So kɔnɔ walima kɛnɛma baarakɛcogo.

• Antistatique, tasuma-fagalan walima UV wajibiyalenw.

• Protective-film wajibiyalen don.

• Kɔrɔbɔli rapɔɔri wajibiyalenw ani taayɔrɔ suguya.

• Koman fɔlɔ hakɛ ani san hakɛ jateminɛlen.

• Foroko, taayɔrɔ port ani lase don.

Aw ka Frosted PVC sɛbɛnfura wajibiyalenw ci

Waati min bɛ Frosted PVC sɛbɛnfura s

Lead time bɛ daminɛ ni a janya, a bonya, a sanfɛla, a kulɛri, a foroko, a sarali ani a kɛcogo min dagalen don, o dafalen kɔfɛ.

Packing ani Delivery

Misaliw foroko : A4 sɛbɛnfura min bɛ kɛ s ani misali tigɛlen misɛnninw bɛ se ka pake lakanabagaw ni kartɔnw kɔnɔ.

Kurukuruw pake: Filimu finmanw bɛ se ka siri ni PE filimu ye, ni kraft papier ye walima ni lakanafɛn ye min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

Sheet packing: sɛbɛnfura min bɛ kɛ s fla bɛ se ka lakana ni PE bɔrɔw ye, kraft papier, lakanani nkɔni ani palɛti gɛlɛnw.

Surface protection: Filimu min bɛ mɔgɔ tanga, o bɛ se ka kɛ fan kelen walima fan fila bɛɛ la fɛn sugandilenw na.

Palɛti pakew : Plywood walima palɛti minnu tɛ sisi bɔ, olu bɛ se ka ladilan ka kɛɲɛ ni sɛbɛnfura min bɛ kɛ bonya ni u minɛcogo wajibiyalenw ye.

Minɛn doni : Doni hakɛ bɛ bɔ fɛn dilannenw janya la, sɛbɛnfura min bɛ kɛ hakɛ la, a kurukuru cɛmancɛ la, palɛti cogoya la ani sariya siratigɛ la girinya danw.

Fɛɛrɛbɔ kunnafoniw ani sɛgɛsɛgɛli rapɔɔriw

Aw ye PVC kunnafonidilan jɛlen sɛbɛnfura min bɛ kɛ sɛbɛnfura min bɛ kɛ sɔrɔlenw lajɛ walasa ka kunnafoni bɛɛ lajɛlen sɔrɔ ani baarakɛcogo kunnafoniw.

   PVC sɛbɛn jɛlen Donanw ka sɛbɛn telesarse

Aw ye PVC sɛbɛnfura min bɛ kɛ sɛgɛsɛgɛli rapɔɔri sɔrɔlen lajɛ sɛgɛsɛgɛliw ni fɛn dilannenw kunnafoniw kama minnu bɛ o kunnafoni kɛrɛnkɛrɛnnen kɔnɔ.

   PVC sɛbɛnfura Kɔrɔbɔli Raporo telesarse

Sannikɛlaw ka kan k’a jira ko kunnafoni bɛɛ sɛbɛnfura min bɛ kɛ walima kunnafoni bɛɛ bɛ tali kɛ PVC hakɛ tigitigi la, a bonya, a kulɛri, a sanfɛla fini, a dilanni yɔrɔ ani a kɛcogo laɲininen.

Mun na i bɛ HSQY sugandi ka kɛ i ka Frosted PVC sɛbɛnfura Supplier ye?

• A janya bɛ daminɛ milimɛtɛrɛ 0,06 ɲɔgɔn na ka se milimɛtɛrɛ 2 ma.

• Master rolls, slit rolls ani fla sɛbɛnfura min bɛ kɛ s.

• Fɛn minnu bɛ kɛ fan kelen fɛ ani fan fila fɛ minnu bɛ kɛ ni nɛnɛ ye.

• Textures fines, grosses, matte, velours ani embossed.

• Kulɛri jɛlenw, minnu bɛ yeelen bɔ ani minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Sɛbɛnni, foli-kɛsu ani thermoforming grades.

• Misaliw minnu bɛ kɛ ka sɛbɛnni kɛ, ka foli kɛ ani ka jateminɛ kɛ ni ɲɛnayeli ye.

• Tigɛ-ka-se-size, slitting ani sɛbɛnfura min bɛ kɛ ing dɛmɛ.

• Filimu min bɛ mɔgɔ tanga ka kɛɲɛ ni mɔgɔw sago ye ani a foroko minnu bɛ taa jamana wɛrɛw la.

• Sɛgɛsɛgɛli ka kɛɲɛ ni fɛn ɲɛfɔlenw ye minnu dabɔra.

Sani u ka caman dilan, HSQY b’a ɲini ka PVC sɛbɛnfura min bɛ kɛ frosted sugandilenw kɔrɔbɔ ni kiliyan ka sɛbɛnnikɛlan yɛrɛ ye, tintin, die-cutting baarakɛminɛn, foli kɛcogo, thermoforming machine ani fɛn dilannenw dilanni.

Aw ye HSQY lajɛ walasa ka misaliw ni sɔngɔko dɔn

Ɲininkali minnu bɛ kɛ tuma caman na Frosted PVC sɛbɛnfura s

Frosted PVC plastiki finman sɛbɛnfura min bɛ kɛ ye mun ye ?

O ye filimu gɛlɛn walima a tilancɛ gɛlɛn ye PVC walima sɛbɛnfura min bɛ kɛ min ɲɛ ye translucent texture ye min bɛ dɔ bɔ kɛnɛya ni yecogo tilennen na.

Danfara jumɛn bɛ frosted ni matte PVC cɛ ?

Tuma caman na, daɲɛw bɛ Fɔ ɲɔgɔn ma. A yecogo tigitigi ka kan ka ɲɛfɔ ni dugukolo sanfɛla ta ye, a yeelen, a gɛlɛya, a sisi ani a yeelen-cicogo wajibiyalenw.

Fɛnɲɛnɛma jumɛnw bɛ sɔrɔ?

HSQY bɛ frosted PVC dilan ka bɔ 0,06mm ɲɔgɔn na ka se 2mm ma.

Yala fɛn minnu bɛ 0,25mm duguma, olu ye sɛbɛnfura min bɛ kɛ ye walima filimu ye wa?

Fɛn finman min bɛ to senna, n’o bɛ milimɛtɛrɛ 0,25 ɲɔgɔn duguma, a ka c’a la, o bɛ fɔ ko filimu, hali ni jago tɔgɔladonni tɛ kelen ye sugu la.

Yala fan kelen frosted PVC bɛ sɔrɔ wa?

Awɔ. Fɛn kelen bɛ se ka kɛ ni fini ye min bɛ kɛ ni nɛnɛ ye ka sɔrɔ kɔfɛla bɛ nɔgɔya walima ka kɛnɛya.

Yala frosted frosted PVC bɛ sɔrɔ wa?

Awɔ. Mate walima frosted textures bɛ se ka dilan o yɔrɔ fila bɛɛ kan.

Yala frosted texture bɛ se ka kɛ ka kɛɲɛ ni mɔgɔw sago ye wa?

Fɛnɲɛnɛma, cɛmancɛ, gɛlɛn, velours ani embossed surface nɔw bɛ se ka jateminɛ ka kɛɲɛ ni misali ye min dabɔra.

Yala frosted PVC bɛ se ka sɛbɛn wa?

Awɔ. A bɛ se ka dɛmɛ don ekran, offset, UV inkjet ani nizɛri sɛbɛnni sugandilenw na enki ni nɔrɔli sɛgɛsɛgɛli kɔfɛ.

Fɛn jumɛn ka kan ka sɛbɛn?

Fɛn min wajibiyalen don, o bɛ bɔ yecogo ɲininen ni tintin kɛcogo la. A fan matirilen ni a ɲɛda jɛlen ka kan ka sɛgɛsɛgɛ u danma.

Yala frosted PVC bɛ se ka kɛ ka kɛsu foli kɛ wa?

Awɔ. Kalanso bɛnnenw bɛ se ka tigɛ, ka jate kɛ, ka da, ka nɔrɔ walima ka u sɔgɔ pakew kɔnɔ minnu bɛ yeelen bɔ.

Yala frosted PVC bɛ se ka kɛ thermoformé ye wa?

Furakɛcogo ɲuman bɛ se ka dilan ka kɛ blister packs ye, inserts, covers ani custom components.

Yala frosted texture bɛ to thermoforming kɔfɛ wa?

A ɲɛda bɛ se ka Changé yɔrɔw la minnu sɔgɔlen don kosɛbɛ, o la, a ka kan ka texture retention sɛgɛsɛgɛ ni moulu yɛrɛ ye.

Yala frosted PVC bɛ danbe dafalen di wa?

A tɛ kɛ wajibi ye. Gundolakow bɛ bɔ a kɛcogo, a bonya, a yeelen ani a yɔrɔjan min bɛ sɛbɛnfura min bɛ kɛ ni a kɔfɛfɛn cɛ.

Yala frosted PVC bɛ se ka kɛ LED diffuser ye wa?

A bɛ se ka yeelen jɛnsɛn, nka yeelenko baarakɛlaw bɛ yeelen bɔli kɔlɔsi, sisi, yɔrɔ duman dogocogo ani funteni kɔrɔbɔli sɛgɛsɛgɛliw de wajibiya.

Yala thin PVC bɛ se ka kɛ yɛrɛdɔn-yɔrɔ ye wa?

A ka c’a la, PVC finman bɛ karamɔgɔ, kɔkanna walima dɛmɛnan de wajibiya wa a man kan ka jate i n’a fɔ jɔli walima lakana galasi.

Yala frosted PVC sɛbɛnfura min bɛ kɛ s bɛ se ka kɛ kɛnɛma wa?

Kɛnɛma baara kuntaalajan bɛ a ɲini ka UV-stabilized grade (UV-stabilized grade) dɔ labɛn ani ka kɔrɔbɔ ka kɛɲɛ ni waati latigɛlen ye ani ka kɛɲɛ ni a jirali waati ye.

Yala standard frosted PVC bɛ tasuma bali wa?

Tasuma kɛcogo man kan ka jate. Tasuma-fagalan ni sɛgɛsɛgɛli rapɔɔri ka kan ka kɛ walasa ka a janya tigitigi dɔn.

Yala antistatique frosted PVC bɛ sɔrɔ wa?

Antistatic grades bɛ se ka jateminɛ ka kɛɲɛ ni surface-resistance hakɛ wajibiyalen ye ani baarakɛcogo.

Yala frosted PVC bɛ se ka tigɛ ni laser ye wa?

PVC man kan ka tigɛ walima ka ja ni laser minɛn gansanw ye bawo gazi faratilenw ni buguri bɛ se ka bɔ. Masina tigɛcogo de ka ɲi.

Frosted PVC ka kan ka saniya cogo di?

Aw bɛ finimugu nɔgɔlen, safinɛ nɔgɔlen ani ji kɛ. Aw bɛ aw yɛrɛ tanga fɛnɲɛnamafagalanw ma minnu bɛ sɔgɔsɔgɔ ani fɛnɲɛnamafagalanw minnu bɛ se ka a ɲɛda cogoya tiɲɛ.

Yala frosted PVC bɛ se ka segin ka kɛ fɛn wɛrɛ ye wa?

PVC sɛnɛfɛnw tiɲɛnen saniyalenw bɛ se ka baara kɛ kokura fɛɛrɛko siratigɛ la, nka u lajɛli yɛrɛyɛrɛ ni u lasegincogo bɛ bɔ sigida yɔrɔw ni fɛn dilannenw nɔgɔli la.

Koman hakɛ fitinin ye mun ye?

MOQ sariyalen bɛ kilo 1000 ɲɔgɔn bɔ. Kulɛri minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, u kɛcogo ani u dilanni kɛrɛnkɛrɛnnenw, olu bɛ se ka hakɛ wɛrɛ de wajibiya.

Yala misaliw bɛ sɔrɔ wa?

A4 sɛbɛnfura min bɛ kɛ s, tigɛlenw walima roll samples danmadɔw bɛ se ka sɔrɔ walasa ka texture, optique cogoya, sɛbɛnni, foli ani forming lajɛ.

A dilanni ɲɛminɛ waati ye mun ye?

A ka c’a la, sɛnɛcogo jɔnjɔn bɛ tile 7-15 ɲɔgɔn ta, a ɲɛfɔli, a misali, a foroko ani a sarali dafalen kɔfɛ.

Kunnafoni jumɛnw de ka kan ka kɛ walasa ka quotation sɔrɔ?

Aw bɛ a janya, a bonya, a sɔrɔcogo, a kulɛri, a yɔrɔ min bɛ kɛ ni nɛnɛ ye, a sɛbɛnni walima a dilanni taabolo, a hakɛ, a hakɛ kɛrɛnkɛrɛnnen ani a taayɔrɔ di.

Aw ye Custom Frosted PVC sɛbɛnfura Quote sɔrɔ

HSQY Plastic Group ko la

HSQY Plastic Group bɛ PVC sɛbɛnfura min bɛ kɛ s frosted, printable PVC filimuw, transparent PVC sɛbɛnfura min bɛ kɛ s, kulɛri PVC sɛbɛnfura min bɛ kɛ s, PET sɛbɛnfura min bɛ kɛ s, PP sɛbɛnfura min bɛ kɛ s ani customized plastiki fɛnw ka di diɲɛ B2B kuntigiw ma.

HSQY bɛ sɛbɛnnikɛlanw, kɛsu foli dilannikɛlaw, blister-packaging tɔnw, sɛbɛnnikɛlan iziniw, taamasiyɛn dilannikɛlaw, plastiki fɛn caman tigɛlikɛlaw, fɛnw donbagaw ni u tilabagaw dɛmɛ ni misali sɛgɛsɛgɛli ye, ka fɛnw dilanni kɛ ka kɛɲɛ ni mɔgɔw sago ye, ka jogo sɛgɛsɛgɛ ani ka fɛnw bila ka taa jamana wɛrɛw la.

Aw ye sɔngɔko sɛbɛn ɲini ani Sample