Samuwar PVC Mai Sanyi Takardar filastik

Mai sanyi PVC Sirara Takardar filastik Mai ƙera

HSQY tana ƙera fina-finan filastik masu sirara takardar abu PVC da kuma fina-finan roba masu ƙarfi PVC masu kama da na roba don bugawa, akwatunan naɗewa, marufi, kayan rubutu, katuna, nunin kaya, allunan ado da kuma canza masana'antu.

Kauri da ake da shi ya kama daga kimanin 0.06mm zuwa 2mm. Ana iya samar da siraran ƙayyadaddun bayanai a matsayin birgima ko yanke takardar abu s, yayin da cikakkun ƙayyadaddun bayanai masu kauri gabaɗaya ana samar da su azaman lebur takardar abu s bisa ga faɗin da ake buƙata, tsawonsa da kuma ƙarewar saman.

Fuskar da ta yi sanyi tana rage hasken kai tsaye, tana rage alamun yatsan hannu da ake iya gani kuma tana haifar da kamanni mai haske yayin da take barin wani ɓangare na hasken ya ratsa.

Haɗuwar saman da ake da su sun haɗa da matte/matte, matte/mai sheƙi, mai laushi, mai kauri, mai laushi/matte, mai embossed da kuma kammalawa na musamman.

Launuka na yau da kullun sun haɗa da fararen da aka yi da frost, masu haske da launuka masu haske. Hakanan ana iya kimanta launuka masu haske, baƙi da launuka na musamman bisa ga kauri da adadin da ake buƙata.

Bugawa, akwatin naɗewa, gyaran thermo, mai daidaita UV, antistatic da kuma mai hana harshen wuta PVC takardar abu s suna buƙatar takamaiman tsari na aikace-aikace. Ya kamata a haɗa waɗannan kaddarorin a cikin ƙayyadaddun bayanai da aka amince da su maimakon ɗauka ga kowane matakin PVC mai sanyi.

Don kayan da za a iya bugawa masu alaƙa, duba HSQY PVC bugu takardar abu kewayon.

Nemi Farashi Mai Tsafta PVC takardar    Nemi Samfuran Sama

Menene Siririn PVC Mai Sanyi Takardar filastik ?

Filastik mai santsi PVC takardar abu abu ne mai tauri ko mai ɗan tauri na polyvinyl chloride tare da saman matte mai laushi wanda ke warwatsa haske mai haske da watsawa.

Ba kamar goge mai haske PVC ba, saman da aka yi masa sanyi yana ba da ƙarancin sheƙi da kuma rage gani kai tsaye ta hanyar takardar abu .

Dangane da tsarin samarwa, ana iya yin frosting ɗin kayan a gefe ɗaya ko a ɓangarorin biyu.

Mai frosted PVC mai gefe ɗaya yana haɗa saman matte tare da gefen baya mai santsi ko sheƙi, yayin da mai frosted PVC mai gefe biyu yana ba da laushi mai laushi a saman biyu.

Ana kuma bayyana Frosted PVC a matsayin matte PVC takardar abu , translucent PVC film, sanded PVC takardar abu , clear matte vinyl, sturged frosted vinyl da textured translucent PVC film.

Hotunan da aka yi wa sanyi PVC takardar

Bayani dalla-dalla PVC takardar

Ya kamata a tabbatar da juriyar kauri ta ƙarshe, girma, yanayin saman, sheƙi, hazo, watsa haske, launi, tauri, aikin bugawa da ƙa'idodi na musamman a cikin takaddun da aka amince da su na rubutu.

PVC Fim vs. PVC Siraran Takarda

Waɗannan jeri na kauri umarni ne na zaɓi na gaba ɗaya. Taurin da ake buƙata, sassauci da aikin yin tsari sun dogara ne akan tsarin PVC da ƙirar samfurin da aka gama.

Gefe ɗaya da kuma gefe biyu mai sanyi PVC

Watsa Haske, Hazo da Sirri

Frosted PVC yana ba da damar haske ya ratsa yayin da yake rage ganin abubuwan da ke bayan takardar abu .

Sakamakon gani na ainihi ya dogara ne da kauri takardar abu , ƙaiƙayin saman, launin fata, nisan da abin, alkiblar haske da haske a kowane gefe.

Masu siye da ke buƙatar ingantaccen aikin gani ya kamata su ƙayyade yadda za a iya ganin haske, hazo, haske, sheƙi da kuma bambancin launi da za a iya amincewa da shi.

Gamawa mai sanyi gabaɗaya baya samar da cikakken sirri ta atomatik, yaɗuwar LED mai daidaitawa ko kuma tabbatar da kawar da hotspot.

Ga bangarorin sirri, abokin ciniki ya kamata ya kimanta samfurori a nisan da aka nufa na kallo da yanayin haske.

Bugawa akan Frosted PVC takardar

Ana amfani da Frosted rigidid PVC sosai don katunan da aka buga, nunin talla, marufi, menus, alamun shiryayye da zane-zanen ado.

Ya kamata kwastomomi su gwada ainihin tsarin tawada domin aikin bugawa na iya bambanta tsakanin gefen da aka yi masa fenti da kuma gefen da aka goge.

Akwatunan da aka naɗe PVC don Naɗewa

Ana iya yanke Frosted PVC , a sanya masa maki sannan a naɗe shi cikin akwatunan marufi masu haske don kayan kwalliya, kyaututtuka, kayan rubutu, kayan lantarki da kayayyakin talla.

Ƙarfin da aka yi da matte zai iya rage sawun yatsa kuma ya haifar da laushi fiye da marufi mai haske da aka goge gaba ɗaya.

Aikin naɗewa ya dogara ne da kauri, tsarin resin, yanayin takardar abu , girman tsarin crease-rule da zafin sarrafawa.

Ya kamata a kimanta samfurin samarwa don yin farin ciki, fashewa, mannewa na baya, mannewa da kuma dacewa da walda ta ultrasonic ko mita mai yawa.

Frosted PVC don Marufi da Tsarin Tsabtace Kuraje

Ana iya ƙirƙirar frosted mai matakin thermoforming PVC zuwa fakitin blister, abubuwan da aka saka a cikin samfur, murfin, tire da kayan ado.

Ya kamata a inganta yanayin zafi, lokacin samar da shi, zafin mold, zurfin zana shi, sanyaya shi da kuma yanayin takardar abu don kauri da aka zaɓa.

Zane mai zurfi na iya canza kamanni da yawan yanayin da ke da sanyi, musamman a wurare masu faɗi sosai.

Masu siye ya kamata su gwada ɓangaren da aka ƙera don ganin yadda kauri bango yake, bambancin haske, riƙe rubutu da kuma daidaiton girma.

Amfani da Takardun Siraran PVC

• Bugawa: Zane-zanen talla, katuna, menus, lakabi, overlay da nunin wurin siye.

• Akwatunan naɗewa: Kayan kwalliya masu haske, kyaututtuka, kayan rubutu da kuma marufi na siyarwa.

• Marufi na blister: Marufi mai tsari na thermoformed don kayan masarufi, kayan aiki, kayan lantarki da kayan haɗi.

• Kayan rubutu: Murfin littafin rubutu, manyan fayiloli, masu rabawa, murfin rahoto da walat ɗin takardu.

• Nunin dillalai: Alamun shiryayye, abubuwan da aka saka a allon nuni, allunan talla da kuma masu raba kayayyaki.

• Allon kayan ado: Abubuwan da aka saka a cikin kayan daki, abubuwan da aka haɗa da inuwar fitila da kuma kayan adon ciki masu haske.

• Abubuwan da aka saka a sirri: Faifan da aka saka a cikin firam ko kuma waɗanda aka tallafa wa waɗanda ke ba da damar watsa haske yayin da suke rage gani kai tsaye.

• Canjin masana'antu: Abubuwan da aka yanke da mutu, rufin kariya, layuka da sassan da aka tsara musamman.

Frosted PVC vs. PET , PP da Acrylic

Maki na Cikin Gida, Waje da na Musamman PVC

Bai kamata a bayyana daidaitaccen frosted PVC a matsayin mai juriya ga waje, mai hana kumburi, mai hana wuta ko kuma wanda ya dace da kowace aikace-aikacen da aka tsara ba.

Yankan, Ƙirƙira da Tsaro

• Za a iya yanke siririn PVC da kayan yanka, wukake, masu yankewa da kayan aikin guillotine masu dacewa.

• Ana iya yanke zanen gado, a yi masa naushi, a haƙa rami, sannan a yi amfani da kayan aiki masu dacewa wajen sarrafa shi.

• Kayan aikin yankewa ya kamata ya zama mai kaifi don rage ƙuraje, fashewa da kuma farar fata mai ƙarfi.

• Ya kamata a gwada layukan maki da kuma hanyar ninkawa kafin a samar da akwatin naɗewa.

• Ya kamata samar da zafi ya yi amfani da yanayin zafi da aka tsara da kuma isasshen iska.

• Ya kamata a zaɓi hanyoyin haɗawa da walda bisa ga tsarin PVC da kuma aikace-aikacen da aka gama.

• Bai kamata a sarrafa PVC da kayan aikin yanke laser ko sassaka laser ba.

Gwaje-gwajen Kula da Inganci da Aka Ba da Shawara

• PVC Tabbatar da resin da ƙari.

• Juriyar kauri da kauri.

• Faɗi, tsayi da kuma haƙurin diagonal.

• Faɗin takardar, lanƙwasa birgima da ingancin lanƙwasa.

• Daidaiton rubutu mai sanyi.

• Shaƙi da kuma ƙaiƙayi a saman.

• Watsa haske, hazo da haske inda aka ƙayyade.

• Daidaiton launi da kuma daidaiton launi tsakanin rukuni zuwa rukuni.

• Maki na lu'ulu'u, kumfa, layukan kwarara, tabo baƙi da ƙazanta.

• Aiki mai ƙarfi, tasiri da naɗewa.

• Mannewa da juriyar bugu.

• Gwaje-gwajen yankewa, ƙima da kuma naɗe-farin jiki.

• Gwaje-gwajen thermoforming da daidaiton girma.

• Gwajin hana hana shiga inda ake buƙata.

• Gwajin yanayin UV don ingancin waje.

• Gwajin ƙonewa don takamaiman matakan hana ƙonewa.

• Gwaje-gwajen mannewa da cire fim ɗin kariya.

• Duba kaya, fakiti da kuma duba kwantena.

Zaɓuɓɓukan da aka yi wa ado na musamman PVC takardar

• Kauri daga 0.06mm zuwa 2mm.

• Nau'in birgima na babban wasa, na'urorin birgima da kuma na'urorin birgima na lebur takardar abu .

• Girman da aka ƙayyade kuma aka keɓance na takardar abu .

• Fari mai haske, mai haske da launuka daban-daban.

• Fuskokin da aka yi da sanyi mai gefe ɗaya da kuma na gefe biyu.

• Haɗin matte/matte, matte/mai sheƙi da kuma matte/matte.

• Kyawawan laushi, matsakaici da kuma ƙazanta masu kauri.

• Bugawa, naɗewa-akwatin da kuma matakan thermoforming.

• Tsarin da ke da tsayayyen UV, antistatic da kuma hana harshen wuta.

• Fim ɗin kariya na gefe ɗaya ko na gefe biyu.

• Ayyukan yanka-yanke-yanke, takardar abu , yankewa, da yankewa.

• Lakabi na musamman, kwalaye, pallets da alamun jigilar kaya.

Bayanin da ake buƙata don ƙimar PVC takardar mai sanyi

• Kauri da haƙuri da ake buƙata.

• Faɗin birgima ko girman takardar abu .

• Naɗewa, takardar abu ko tsarin samar da kayan yanka.

• Launi mai haske, fari, baƙi ko kuma na musamman.

• Fuskar da aka yi da sanyi a gefe ɗaya ko gefe biyu.

• Kyakkyawan laushi, matsakaici ko mai kauri mai santsi.

• Ana buƙatar watsa haske, hazo ko sheƙi.

• Kayan aikin bugawa, tawada da hanyar warkarwa.

• Tsarin naɗewa, yankewa ko kuma tsarin thermoforming.

• Aikace-aikacen cikin gida ko waje.

• Bukatun antistatic, hana harshen wuta ko UV.

• Bukatar fim mai kariya.

• Rahoton gwaji da ake buƙata da kasuwar da za a je.

• Adadin oda na farko da kuma adadin da aka kiyasta na shekara-shekara.

• Marufi, tashar jiragen ruwa da za a kai da kuma ranar da za a kawo.

Aika Bukatunku na Frosted PVC takardar

Lokacin Jadawalin Da Aka Yi Daskarewa PVC takardar s

Lokacin jagora yana farawa bayan an tabbatar da kauri, girma, saman, launi, marufi, biyan kuɗi da samfurin da aka amince da shi.

Shiryawa da Isarwa

Samfurin marufi: Ana iya saka A4 takardar abu s da ƙananan samfuran da aka yanke a cikin jakunkuna masu kariya da kwali.

Kunshin nadi: Ana iya naɗe bakin fim ɗin da fim ɗin PE, takarda kraft ko kayan kariya na musamman.

Marufin takarda: Za a iya kare lebur takardar abu s da jakunkunan PE, takarda kraft, kusurwoyin kariya da kuma pallets masu tauri.

Kariyar saman: Ana iya amfani da fim ɗin kariya a gefe ɗaya ko duka biyun don samfuran da aka zaɓa.

Marufin fale-falen: Ana iya keɓance fale-falen da ba su da katako ko kuma waɗanda ba su da hayaki bisa ga girman takardar abu da buƙatun sarrafawa.

Lodawa a cikin kwantena: Yawan lodawa ya dogara da kauri na samfurin, girman takardar abu , diamita na birgima, tsarin pallet da iyakokin nauyi na doka.

Bayanan Fasaha da Rahotannin Gwaji

Duba bayanan PVC share takardar abu takardar abu da ake da su don cikakken bayani game da kayan aiki da sarrafawa.

   Sauke Takardar Bayanai Fayil na PVC mai haske

Duba rahoton gwajin PVC takardar abu da ke akwai don gwaje-gwaje da bayanan samfurin da aka haɗa a cikin wannan takamaiman rahoton.

   Sauke Rahoton Gwaji PVC takardar

Masu siye ya kamata su tabbatar da cewa kowace bayanai takardar abu ko rahoton ya shafi ainihin matakin PVC , kauri, launi, kammala saman, wurin samarwa da kuma aikace-aikacen da aka yi niyya.

Me Yasa Zabi HSQY A Matsayin Mai Kaya Da Kaya Da Aka Yi Daskarewa PVC takardar ?

• Kauri daga 0.06mm zuwa 2mm.

• Nau'in birgima na babban wasa, na'urorin birgima da kuma na'urorin birgima na lebur takardar abu .

• Fuskokin da aka yi da sanyi a gefe ɗaya da kuma gefe biyu.

• Launuka masu kyau, masu kauri, matte, velvet da kuma embossed.

• Launuka masu haske, masu haske da kuma na musamman.

• Bugawa, naɗewa-akwatin da kuma matakan thermoforming.

• Samfura don bugawa, naɗewa da kimantawa ta gani.

• Yanke-goge, yankewa da kuma tallafin takardar abu .

• Fim ɗin kariya na musamman da marufi na fitarwa.

• Dubawa bisa ga ƙa'idodin da aka amince da su.

Kafin a samar da adadi mai yawa, HSQY ya ba da shawarar a gwada zaɓin PVC takardar abu mai sanyi ta amfani da firintar abokin ciniki ta ainihi, tawada, kayan aikin yankewa, tsarin naɗewa, injin thermoforming da ƙirar samfurin da aka gama.

Tuntuɓi HSQY don Samfura da Farashi

Tambayoyin da Ake Yawan Yi Game da Frosted PVC takardar s

Menene siraran filastik PVC mai sanyi takardar abu ?

Fim ne mai tauri ko kuma mai ɗan tauri PVC ko takardar abu mai siffar fili mai haske wanda ke rage sheƙi da gani kai tsaye.

Menene bambanci tsakanin frosted da matte PVC ?

Sau da yawa ana amfani da kalmomin a madadin juna. Ya kamata a bayyana ainihin kamannin ta hanyar samfurin saman, sheƙi, ƙaiƙayi, hazo da buƙatun watsa haske.

Wadanne kauri ake samu?

HSQY yana samar da kauri mai sanyi PVC daga kimanin 0.06mm zuwa 2mm.

Shin kayan da ke ƙasa da 0.25mm takardar abu ne ko kuma fim?

Siraran kayan da ke ƙasa da kusan 0.25mm ana kiransu da fim, kodayake sunan kasuwanci ya bambanta dangane da kasuwa.

Shin akwai mai frosted gefe ɗaya PVC ?

Eh. Ɗaya daga cikin ɓangarorin zai iya samun kamannin da aka yi masa frosted yayin da ɓangaren baya kuma ya fi santsi ko sheƙi.

Shin akwai mai frosted gefe biyu PVC ?

Eh. Ana iya samar da laushi mai laushi ko mai sanyi a saman biyu.

Za a iya keɓance yanayin da aka yi masa fenti?

Ana iya kimanta tasirin saman da aka yi da kyau, matsakaici, mai kauri, mai laushi da kuma embossed bisa ga samfurin da aka amince da shi.

Za a iya buga frosted PVC ?

Eh. Yana iya tallafawa allo, offset, inkjet na UV da kuma zaɓaɓɓun bugu na dijital bayan gwajin tawada da mannewa.

Wane gefe ya kamata a buga?

Gefen da ake buƙata ya dogara ne da yanayin da ake so da tsarin tawada. Ya kamata a gwada gefunan matte da waɗanda aka goge daban.

Za a iya amfani da frosted PVC don akwatunan naɗewa?

Eh. Ana iya yanke maki masu dacewa, a naɗe su, a manne su, a haɗa su a cikin akwatunan marufi masu haske.

Shin za a iya yin amfani da frosted PVC a yanayin zafi?

Za a iya ƙirƙirar matakin thermoforming mai dacewa zuwa fakitin blister, abubuwan da aka saka, murfin da abubuwan da aka keɓance na musamman.

Shin yanayin sanyi ya kasance bayan thermoforming?

Fuskar na iya canzawa a wurare masu faɗi sosai, don haka ya kamata a gwada riƙewar rubutu ta amfani da ainihin mold.

Shin frosted PVC yana ba da cikakken sirri?

Ba lallai ba ne. Sirri ya dogara ne da laushi, kauri, haske da kuma nisan da ke tsakanin takardar abu da abin da ke bayansa.

Za a iya amfani da frosted PVC a matsayin mai watsa LED?

Yana iya yaɗa haske, amma aikace-aikacen haske na ƙwararru suna buƙatar gwaje-gwajen watsawa mai sarrafawa, hazo, ɓuya a wurare masu zafi da kuma gwaje-gwajen tsufa da zafi.

Za a iya amfani da siririn PVC a matsayin ɓangaren da ke ɗaukar nauyin kansa?

Sirara PVC yawanci yana buƙatar firam, tsarin tallafi ko tallafi kuma bai kamata a ɗauke shi a matsayin gilashin tsari ko kariya ba.

Za a iya amfani da frosted PVC takardar abu s a waje?

Yin amfani da shi a waje na dogon lokaci yana buƙatar ingantaccen matakin UV wanda aka haɓaka kuma aka gwada shi don yanayin da aka nufa da lokacin fallasa.

Shin daidaitaccen frosted PVC yana hana harshen wuta?

Bai kamata a ɗauka cewa harshen wuta yana aiki ba. Ana buƙatar tsari mai hana harshen wuta da rahoton gwaji don tabbatar da kauri daidai.

Shin akwai antistatic frosted PVC ?

Ana iya kimanta ma'aunin antistatic bisa ga kewayon juriyar saman da ake buƙata da yanayin aiki.

Shin za a iya yanke frosted PVC ta hanyar laser?

Bai kamata a yanke ko a sassaka PVC da kayan aikin laser na yau da kullun ba saboda iskar gas da ƙura masu haɗari na iya haifarwa. Ana ba da shawarar yanke injina.

Ta yaya ya kamata a tsaftace PVC mai sanyi?

Yi amfani da kyalle mai laushi, sabulu mai laushi da ruwa. A guji shafa kushin gogewa da kuma sinadarai masu ƙarfi waɗanda za su iya lalata yanayin saman.

Shin za a iya sake yin amfani da frosted PVC ?

Ana iya sake sarrafa tarkacen da aka samar ta hanyar tsaftacewa PVC , amma tattarawa da sake yin amfani da su ya dogara ne akan wuraren da ake amfani da su a yankin da kuma gurɓatar kayayyaki.

Menene mafi ƙarancin adadin oda?

Matsakaicin MOQ shine kimanin 1000kg. Launuka na musamman, laushi da tsari na musamman na iya buƙatar adadi daban-daban.

Ana samun samfuran?

Ana iya samun samfuran A4 takardar abu s, guntu-guntu da aka yanke ko samfuran nadi masu iyaka don duba yanayin rubutu, kamannin gani, bugawa, naɗewa da kuma samar da su.

Menene lokacin samar da jagora?

Samfurin da aka saba samarwa gabaɗaya yana ɗaukar kimanin kwanaki 7-15 bayan an tabbatar da ƙayyadaddun bayanai, samfuri, marufi da biyan kuɗi.

Wane bayani ake buƙata don yin ƙiyasin farashi?

Samar da kauri, girma, tsarin wadata, launi, saman da aka yi masa fenti, tsari na bugawa ko samarwa, adadi, matsayi na musamman da kuma inda za a je.

Sami Ƙimar Musamman ta Frosted PVC takardar

Game da Ƙungiyar Roba ta HSQY

HSQY Plastic Group tana samar da frosted PVC takardar abu s, fina-finan PVC masu iya bugawa, masu haske PVC takardar abu takardar abu s, masu launi PVC [t103 PET takardar abu s, PP takardar abu s da kayan filastik na musamman ga abokan cinikin B2B na ƙasashen waje.

HSQY tana tallafawa firintoci, masana'antun akwatunan naɗewa, kamfanonin shirya fakiti, masana'antun kayan rubutu, masana'antun alamu, masu canza filastik, masu shigo da kaya da masu rarrabawa tare da gwajin samfura, samarwa na musamman, duba inganci da marufi na fitarwa.

Nemi faɗar farashin da Samfura