Frost Pvc sɛbɛnfura Plastiki -HS-019

PVC sɛbɛn min bɛ kɛ ni nɛnɛ ye, o bɛ kɛ ka fɛnw foroko, ka sɛbɛnni kɛ ani ka gafew datugu

HSQY bɛ PVC sɛbɛnw dilan minnu bɛ kɛ ni nɛnɛ ye, minnu bɛ kɛ ka kɛsu da, ka sɛbɛnni kɛ, gafe datugulanw, sɛbɛnnikɛlanw, pakew finɛtiriw, feerekɛyɔrɔw jiralanw, lakanani datugulanw ani plastiki fɛn caman tigɛli minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

HS-019 ka fɛn dilannenw bɛ yeelenbɔcogo fara ɲɔgɔn kan ni yɔrɔ ye min ma ɲɛ walima min bɛ kɛ ni nɛnɛ ye, o bɛ dɔ bɔ yeelen tilennen na, ka bolokɔnincininw kɛ fɛn ye min tɛ ye kosɛbɛ ani ka yeelenbɔcogo nɔgɔlen dilan ka tɛmɛ PVC jɛlen polisilen kan.

A janya minnu bɛ sɔrɔ, olu bɛ daminɛ 0,06mm ɲɔgɔn na ka se 2mm ma. A ka c’a la, fɛn finmanw bɛ dilan i n’a fɔ kurukuruw walima sɛbɛnfura caman tigɛli, k’a sɔrɔ fɛn ɲɛfɔlen finmanw bɛ se ka dilan i n’a fɔ sɛbɛnfura fla walima panɛri tigɛlenw ka kɛɲɛ ni u bonya ye.

Surface suganditaw ye fan kelen frosted, fan fila frosted, matte/matte, matte/glossy, velvet/matte, fine frosted, coarse frosted ani customized embossed finishes ye.

Fɛn minnu bɛ kɛ ka kɛɲɛ ni sariya ye, olu bɛ sɔrɔ fini jɛlenw na walima minnu bɛ yeelen bɔ. Kulɛri jɛlenw, kulɛri minnu tɛ ye, kulɛri minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye ani sɛbɛnni walima foroko hakɛ minnu bɛ kɛ ka kɛɲɛ ni baarakɛcogo kɛrɛnkɛrɛnnenw ye, olu fana bɛ se ka labɛn ka kɛɲɛ ni komandi hakɛ wajibiyalen ye.

Kɛnɛyako kuntaalajan, dumuniw tali, furakɛli kɛcogo, tasuma-fanga-baarakɛcogo, farikolo-ɲɛnajɛ-minɛnw ani furakisɛ kɛrɛnkɛrɛnnenw kɛlɛli, o bɛ furakɛlicogo dɔw wajibiya minnu dabɔra u dan na ani sɛbɛnw minnu bɛ a dɛmɛ.

Walasa ka kunnafoni wɛrɛw sɔrɔ minnu bɛ tali kɛ o ko la, aw bɛ segin... HSQY PVC sɛbɛnni sɛbɛnw range ani PVC sirili datugulanw.

Frosted PVC sɔngɔ ɲini    Surface Samples ɲini

Frosted PVC Sheet Fɛn dilannen Ja

Frosted PVC Transparent Sheet ye mun ye?

PVC transparent sheet min bɛ kɛ ni nɛnɛ ye, o ye polivinili kuloridi fɛn ye min bɛ se ka wuli, a tilancɛ gɛlɛn walima a gɛlɛn don, a ɲɛda bɛ kɛ ka ɲɛ, min bɛ yeelen bɔlenw ni yeelen cilenw jɛnsɛn.

A tɛ i n’a fɔ PVC jɛlen polisilen, a ɲɛda bɛ kɛ cogo ye min bɛ yeelen bɔ, wa a bɛ fɛn fitininw datugu yɔrɔ dɔ la sɛbɛnfura kɔfɛ k’a sɔrɔ yeelen bɛ tɛmɛ hali bi.

Ka kɛɲɛ ni finimugu sugandilen ye, sɛbɛnfura bɛ se ka kɛ ni fɛn ye min bɛ kɛ ni matiri ye a fan kelen fɛ, a fan fila bɛɛ la walima a fan kelen matirilen ni a fan kelen jɛlen faralen ɲɔgɔn kan.

PVC min bɛ kɛ ni nɛnɛ ye, o fana ɲɛfɔlen don i n’a fɔ PVC jɛlen matɛri, PVC filimu min bɛ yeelen bɔ, vinyl matte gɛlɛn, PVC sɛbɛn min sɔgɔlen don, PVC jɛlen min bɛ kɛ ni nɛnɛ ye walima PVC jɛlen min bɛ kɛ ni sɛbɛnni ye.

HS-019 Frosted PVC sɛbɛn ɲɛnamaw

Ɲɛfɔli labanw ka kan ka fɔ ko a bonya muɲuni, a bonya, a gɛlɛya, a yɔrɔ faralen ɲɔgɔn kan, a kɛcogo, a kulɛri, a ɲɛda cogoya, a sɛbɛnni kɛcogo, a lakanani-filimu wajibiyalen ani a sɛgɛsɛgɛli sariyaw minnu bɛ sirataama.

PVC Frosted min bɛ kɛ fan kelen fɛ ani min bɛ kɛ fan fila fɛ

Frosted, Matte ani Dusted PVC danfara

Surface daɲɛw tɛ kelen ye feerekɛlaw ni ɲɔgɔn cɛ. Farikolo-master sample (farikolo-master sample) bɛ ladilikan di ni finimugu yelen nafa ka bon.

PVC Film ani Sheet Thickness Guide

Gɛlɛya ni sɛgɛsɛgɛli wajibiyalen fana bɛ bɔ PVC dilanni na, plastiki hakɛ, funteni ani fɛn dilannenw dilanni na.

Yeelenbɔ, Haze ani Privacy

PVC min bɛ kɛ ni nɛnɛ ye, o bɛ yeelen bila ka tɛmɛ ka sɔrɔ ka dɔ bɔ yecogo tilennen na ani yeelen min bɛ yeelen bɔ.

A laban yecogo bɛ bɔ dugukolo sanfɛla gɛlɛya, a bonya, a kulɛri, a sisi, a filɛli yɔrɔ, yeelen sira ani a kɔkanna fɛn min bɛ sɛbɛnfura ni a kɔfɛfɛn cɛ.

Sannikɛlaw minnu mago bɛ ɲɛnayeli kɛcogo kɔrɔsilen na, olu ka kan ka yeelen bɔli, sisi, jɛya, kɛnɛya ani yecogo misali dɔ ɲɛfɔ min dabɔra.

Jɛnkulu frosted surface tɛ a yɛrɛma ka gundo dafalen di, LED calibrated diffusion, garanti hotspot dogo walima certified anti-glare performance.

Sɛbɛnni kɛli Frosted PVC Sheet kan

PVC frosted bɛ se ka kɛ pake sɛbɛnnenw ye, gafe ɲɛw, kartiw, laseli jiralanw, labeliw, menu, foli ani ja masirilenw.

Fɛn min ye matte ye ani a fan min sɔgɔlen don, o bɛ se ka kɛ sababu ye ka enki nɔrɔcogo ni sɛbɛnni kɛcogo wɛrɛw di. Fɛn fila bɛɛ ka kan ka sɛgɛsɛgɛ ni fan kelen frosted material sugandira.

PVC frosted ka kɛsu foli ye

PVC frosted semi-rigide bɛ se ka tigɛ ka sa, ka jate kɛ ani ka da ka kɛ foroko kɛsu ye min bɛ yeelen bɔ, ka kɛ ɲɛgɛnw, kadow, sɛbɛnnikɛlanw, ɛntɛrinɛti, tulonkɛfɛnw, finiw ani fɛnw ye minnu bɛ kɛ ka fɛnw laseli kɛ.

Fɛn min bɛ kɛ ni nɛnɛ ye, o bɛ kɛ sababu ye ka a ɲɛda nɔgɔya ka tɛmɛ foroko jɛlen jɛlenw kan, wa a bɛ se ka kɛ sababu ye ka bolokɔniw walima yɔrɔ taamasiɲɛ misɛnninw kɛ fɛn ye min tɛ ye kosɛbɛ.

Foli kɛcogo bɛ bɔ sɛbɛnfura janya la, a gɛlɛyali la, a ɲɛsincogo la, crease-rule hakɛw la, scoring pressure la, lamini funteni ani foli teliya la.

Sɛnɛfɛnw dilanni kɔrɔbɔliw ka kan ka foli finman, kari, spring-back, enki kari, kola nɔrɔli ani welding compatibility high-frequency walima ultrasonic jateminɛ.

PVC frosted ka ɲɛsin gafe ni sirili datugulanw ma

PVC sɛbɛn finmanw bɛ kɛ ka caya i n’a fɔ rapɔɔriw, gafew, gafesɛbɛnw, kaye, lakɔli porozɛw, dumunifɛnw ani jiracogo sɛbɛnw datugulanw.

Yɔrɔ min bɛ yeelen bɔ, o bɛ tɔgɔ sɛbɛn yɔrɔ dɔ jira k’a sɔrɔ a bɛ dɔ bɔ yeelen bɔli la ani bolokɔnincininw na minnu bɛ ye.

A ka c’a la, sirili-datugulan janya minnu bɛ sɔrɔ tuma caman, olu bɛ sugandi ka bɔ fɛn dilannenw yɔrɔ finman na ka kɛɲɛ ni sɛgɛsɛgɛli, gɛlɛya ani sirili-masin seko wajibiyalen ye.

A3, A4, A5, Sɛbɛn, Sariya ani tigɛ hakɛ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka baro kɛ sirili-datugulan porogaramu dafalenw kama.

Foroko ni jirali baarakɛminɛnw

• Box folilenw : Foroko minnu bɛ yeelen bɔ, minnu bɛ kɛ ɲɛgɛnw, kadow, sɛbɛnnikɛlanw, finiw ani ɛntɛrinɛti kan.

• Foroko finɛtiriw: Fenɛtiri minnu bɛ kɛ ni nɛnɛ ye, minnu bɛ fɛn dilannen jira yɔrɔ dɔ la.

• Gafe ɲɛw: Rapport ɲɛw, kaye ɲɛw, menu ani sɛbɛnw lakanani.

• Sɛbɛnni: Kartiw, labeliw, taamasiyɛnw, fɛnw jiralanw ani ja masirilenw.

• Fiyeere jiralanw: Tabali dontaw, jiralanw tilayɔrɔw, fɛn dilannenw marayɔrɔw ani POP yɔrɔw.

• Sɛbɛnnifɛnw: Foli, tilayɔrɔw, sɛbɛnw waribɔlanw, ɲɛw lakananifɛnw ani kalandriya yɔrɔw.

• Lakanali dakunw: Meniw datugulanw, ja datugulanw, bolokɔniw ani izini danfaralanw.

• Panneau decoratifs: Inserts translucents minnu bɛ kɛ karamɔgɔya la walima minnu bɛ dɛmɛ sɔrɔ ani kɔnɔna jiralan yɔrɔw.

Thermoforming ani Blister baarakɛcogo

PVC sɛbɛn min bɛ kɛ ni funteni ye, o bɛnnen don ka kɛ blister packs ye, pakew dontaw, sanubɔlanw, datugulanw ani masirifɛnw.

Foroko funteni, funteni waati, mɔli funteni, dingɛ dunuya, nkɔni janya, nɛnɛ ani sɛbɛnw ɲɛsincogo ka kan ka ɲɛ ka kɛɲɛ ni janya sugandilen ye.

Fɛnɲɛnɛma jugumanba bɛ se ka nɛnɛ yelenw sɔgɔ walima ka dɔ bɔ yɔrɔw la minnu jalen don kosɛbɛ.

Sɛgɛsɛgɛli minnu dilannen don, olu ka kan ka sɛgɛsɛgɛ walasa u ka kogo janya tilatilali, u kɛcogo marali, u jɛlen don, u karilen don, u dɔgɔyali ani u hakɛ sabatili.

PVC Grades So kɔnɔ, kɛnɛma ani Kɛrɛnkɛrɛnnenya la

PVC standard man kan ka fɔ a yɛrɛma ko a bɛ se ka kɛnɛma kudayi, ko a tɛ se ka wuli, tasuma tɛ se ka don a la walima ko a dagalen don baarakɛcogo la min bɛ kɛ ka kɛɲɛ ni sariya ye.

PVC frosted ni PET, PP ani Acrylic

Tigɛ, foli ani fɛn dilanni lakanani

• PVC finman bɛ se ka tigɛ ni muru bɛnnenw ye, ni gilotiniw, sɔgɔlanw ani tigɛminɛnw ye.

• Fɛn dilanni yɔrɔw bɛ se ka tigɛ ka sa, ka punch kɛ, ka sɔgɔ walima ka sira kɛ ni masin ye.

• Baarakɛminɛn nɛrɛmugumaw bɛ dɛmɛ ka dɔ bɔ buruburuw la, ka degun fin ani ka kari minnu tɛ se ka kunbɛn.

• Jatebɔ juguya, suman sira ani foli funteni ka kan ka sɛgɛsɛgɛ sani foli-kɛsu ka dilan.

• Fɛɛrɛ minnu bɛ kɛ ka caya, minnu bɛ kɛ ni funteni ye ani minnu bɛ kɛ ni ultrasonic ye, olu bɛ kɔrɔbɔliw de wajibiya minnu bɛ kɛ ka ɲɛsin baarakɛcogo kɛrɛnkɛrɛnnenw ma.

• Nɛgɛ sirili bɛ nɔrɔli min bɛ bɛn PVC ma, o de wajibiya ani ka sɛgɛsɛgɛli kɛ walasa ka jɛya, ka fanga ani ka taa yɔrɔ wɛrɛ.

• Fiɲɛ bɛrɛbɛrɛ ka kan ka kɛ funteni, foroko ani solda baara waatiw la.

• PVC man kan ka tigɛ walima ka ja ni laser minɛn gansanw ye barisa gazi faratilenw walima buguri bɛ se ka bɔ.

Sɛgɛsɛgɛli minnu bɛ kɛ ka ɲɛsin jogoɲumanya kɔlɔsili ma

• PVC resin ni farali sɛgɛsɛgɛli.

• A bonya ni a bonya muɲuni.

• Rollo bonya, sɛbɛnfura hakɛ ani diagonal tolerance.

• Flatness, curl, winding quality ani a dakun cogoya.

• Frosted texture kelen-kelen.

• Surface gloss ani roughness.

• Yeelen cili, sisi ani jɛya yɔrɔ minnu kofɔlen don.

• Kulɛri ni kulu ni kuluw ka ɲɔgɔndɛmɛ.

• Nɔgɔ nɛrɛmaw, jeliw, kristalɛ yɔrɔw, jibɔyɔrɔw ani nɔgɔw.

• Tensile strength, elongation ani impact baarakɛcogo.

• Printing adhesion ani abrasion resistance.

• Die-cutting, scoring ani fold-whitening sɛgɛsɛgɛliw.

• Termoforming ani texture-retention sɛgɛsɛgɛliw.

• Koli, soudure ani lamination bɛnkan.

• Antistatique, UV walima tasuma sɛgɛsɛgɛli ka ɲɛsin kalasi kɛrɛnkɛrɛnnenw ma.

• Protective-film nɔrɔli ni a bɔli kɛcogo.

• Pake, palɛti ani minɛnw doni sɛgɛsɛgɛli.

Custom Frosted PVC Sheet Sugandiliw

• A janya bɛ daminɛ milimɛtɛrɛ 0,06 ɲɔgɔn na ka se milimɛtɛrɛ 2 ma.

• Master rolls, slit rolls, flatiw ani tigɛlenw.

• Sɛbɛn hakɛ minnu bɛ kɛ ka kɛɲɛ ni sariya ye ani minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Kulɛri jɛlenw, bulu jɛmanw, minnu jɛlen don ani kulɛri minnu tɛ ye.

• Fɛn minnu bɛ kɛ fan kelen fɛ ani fan fila fɛ minnu bɛ kɛ ni nɛnɛ ye.

• Mat/mat, matte/glossy ani velours/mat faralen ɲɔgɔn kan.

• Fɛnɲɛnɛma, cɛmancɛ, gɛlɛn ani oranjɛ-buluw.

• Sɛbɛnni, foli-kɛsu ani thermoforming grades.

• UV-stabilisé, antistatique ani tasuma-fagalan.

• Fɛn kelen walima fan fila lakanani filimu.

• A3, A4, A5, Sɛbɛn ani sirili-datugulan hakɛ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Labɛn minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, kartɔnw, palɛtiw ani cikan taamasiyɛnw.

Kunnafoni minnu ka kan ka kɛ walasa ka Quotation sɔrɔ

• A ka kan ka kɛ a janya ni a muɲuni ye.

• Kurukuru bonya walima sɛbɛnfura hakɛw.

• Roll, sheet walima tigɛ-yɔrɔ dilancogo.

• A wajibiyalen don ka kɛ rigidité walima flexibilité ye.

• A ɲɛ jɛlen don, a ɲɛ ye kulɛri ye walima a ɲɛ tɛ ye.

• Fɛn kelen walima fan fila frosted finish.

• A ka ɲi, a cɛmancɛ, a ka gɛlɛn walima a bɛ kɛ ka kɛɲɛ ni a yɛrɛ sago ye.

• Yeelen cili wajibiyalen, sisi walima kɛnɛya.

• Sɛbɛnni minɛnw, enki ani furakɛli fɛɛrɛ.

• Die-cutting, scoring, folding walima thermoforming kɛcogo.

• So kɔnɔ walima kɛnɛma baarakɛcogo.

• UV, antistatic, tasuma walima funteni dɔgɔyali wajibiyalenw.

• Protective-film wajibiyalen don.

• Kɔrɔbɔli rapɔɔri wajibiyalenw ani taayɔrɔ suguya.

• Hakɛ fɔlɔ ani san ɲinini jateminɛlen.

• Foroko, taayɔrɔ port ani jiginni don wajibiyalen.

Aw ye aw ka Frosted PVC wajibiyalenw ci

Fɛɛrɛbɔsɛbɛnw ani sɛgɛsɛgɛli rapɔɔriw

PVC jɛlen sɛbɛnfura min bɛ sɔrɔ ani PVC sɛbɛn sɛgɛsɛgɛli rapɔɔri bɛ mara jukɔrɔ walasa ka kunnafoni sɔrɔ.

Sani aw ka baara kɛ ni sɛbɛn fila la kelen ye sanni, dilancogo walima sariyaw sigili kama, aw k’a lajɛ ko a bɛ tali kɛ HS-019 dilanni tigitigi la, a bonya, a sanfɛla, a kulɛri, a dilanni yɔrɔ ani a dilanni kulu.

   PVC Clear Sheet Data Sheet telesarse

   PVC sɛbɛn sɛgɛsɛgɛli rapɔɔri telesarse

Sɛbɛnw ni sariya labatoli sɛbɛnw

Sɛbɛn minnu bɛ sɔrɔ, olu bɛ se ka kɛ fɛɛrɛko kunnafoniw ye, lakana kunnafoniw, farikolo-nafolo kunnafoniw, fɛnw dantigɛli sɛbɛnw ani jogoɲini seereyaw.

SGS ka kan ka ɲɛfɔ ka kɛɲɛ ni sɛgɛsɛgɛli tigitigi ye min kɛra sanni ka jira iko diɲɛ bɛɛ ka fɛn dilannenw seereyali.

ISO seere o seere tigi, a dilanni yɔrɔ, a bɔko sariyalen, a seereyaw hakɛ ani a baarakɛcogo waati ka kan ka lajɛ sani a ka bɔ kɛnɛ kan.

ISO 9001 ye jogoɲumanya-sɛnɛcogo sariya ye, wa a tɛ dumuniko, furakɛli, tasuma-fanga-minɛn walima sigida sariyaw labatoli sigi a yɛrɛma PVC sɛbɛnfura la.

Packing ani Delivery

Misaliw pake : A4 sɛbɛnw ni misali tigɛlen misɛnninw bɛ se ka lakana ni PE bɔrɔw ni kartɔn gɛlɛnw ye.

Kurukuruw pake : PVC kurukuru finmanw bɛ se ka siri ni PE filimu ye, ni kraft papier ye, ni ji tɛ don a la ani ni dakun lakanani ye.

Sɛbɛnw pakew : Sɛbɛnw pakew bɛ kilo 30 ɲɔgɔn bɔ, walima u bɛ kɛ ka kɛɲɛ ni u bonya ni u minɛcogo wajibiyalenw ye.

Surface protection: PE wrapping, interlayer material walima protective film bɛ se ka baro kɛ fɛnw kan minnu mago bɛ sɔgɔsɔgɔninjɛ lakanani na.

Palɛti pake : Palɛti doni min bɛ tali kɛ a la, o bɛ se kilo 500-2000 ma ka kɛɲɛ ni sɛbɛn hakɛ ni a minɛcogo dan ye.

Konteyna doni : Reference doni bɛ se tɔni 20 ma, ka kɛɲɛ ni fɛn dilannenw hakɛ ye, palɛti labɛncogo ani sariya siratigɛ la girinya dantigɛli.

A dilanni waati : A ka c’a la, fɛn minnu bɛ kɛ ka kɛɲɛ ni sariya ye, olu bɛ tile 7-15 ɲɔgɔn de wajibiya u ɲɛfɔcogo, u misali, u pakew ani u sarali dafalen kɔfɛ.

Mun na i bɛ HSQY sugandi ka kɛ i ka Frosted PVC Sheet feerela ye?

• A janya bɛ daminɛ milimɛtɛrɛ 0,06 ɲɔgɔn na ka se milimɛtɛrɛ 2 ma.

• Rollo, sheets ani tigɛlenw ka kɛɲɛ ni u bonya ye.

• Fɛn minnu bɛ kɛ fan kelen fɛ ani fan fila fɛ minnu bɛ kɛ ni nɛnɛ ye.

• Textures fines, grosses, matte, velours ani embossed.

• Kulɛri jɛlenw, tintin, translucent ani opaque.

• Sɛbɛnni, foli-kɛsu, sirili-datugulan ani foroko jatew.

• Misaliw minnu bɛ kɛ ka jateminɛ kɛ ɲɛnayeli, sɛbɛnni ani foli la.

• Custom slitting, sheeting ani tigɛ-size dɛmɛ.

• Protective-film ani export-packing sugandiliw.

• Sɛgɛsɛgɛli ka kɛɲɛ ni fɛnw ye minnu dabɔra.

Sani u ka fɛn caman dilan, HSQY b’a ɲini aw fɛ aw ka fɛn sugandilenw kɔrɔbɔ ni kiliyan ka sɛbɛnnikɛlan yɛrɛ ye, ni tintiri ye, ni die tigɛminɛn ye, ni foli kɛcogo ye, ni thermoforming machine ye ani ni fɛn dilannenw dilanni ye.

Aw ye HSQY lajɛ walasa ka misaliw ni sɔngɔko dɔn

Ɲininkali minnu bɛ kɛ tuma caman na PVC sɛbɛnw kan minnu bɛ kɛ ni nɛnɛ ye

PVC transparent sheet min bɛ kɛ ni nɛnɛ ye, o ye mun ye?

O ye PVC filimu walima sɛbɛn ye min bɛ yeelen bɔ walima min bɛ yeelen bɔ, a ɲɛda bɛ kɛ ni fɛn ye min bɛ dɔ bɔ kɛnɛya la ani ka fɛn dɔw datugu a fɛn kɔfɛ.

HS-019 frosted PVC sheet bɛ kɛ mun na?

A bɛ kɛ fɔlɔ kɛsu foli, sɛbɛnni, gafe datugulanw, sɛbɛnnikɛlanw, pakew finɛtiriw, jiralanw ani lakananifɛnw.

Yala PVC frosted ni PVC matte ye kelen ye wa?

A ka c’a la, o daɲɛw bɛ fɔ fɛn kelenw na, nka PVC min bɛ kɛ ni nɛnɛ ye, o bɛ se ka kɛ ni ɲɛda jɛnsɛnni barikama ye, ka sɔrɔ PVC matte bɛ se ka kɛ fɔlɔ ka ɲɛfɔli kɛ yɔrɔ ye min tɛ kɛnɛya kosɛbɛ.

Danfara jumɛn bɛ PVC matte ni bugurilama cɛ?

Matte PVC sugandilen don walasa ka yecogo fini ye min tɛ yeli kɛ kosɛbɛ. Yɔrɔ min buguri ka nɔgɔn, o bɛ se ka dɔ bɔ kosɛbɛ sɛbɛnw ni ɲɔgɔn cɛ balili la k’a sɔrɔ a bɛ kɛnɛya ka caya.

Yala PVC frosted fan kelen bɛ sɔrɔ wa?

Awɔ. Fɛn kelen bɛ se ka kɛ ni nɛnɛ ye walima ka kɛ nɛnɛ ye ka sɔrɔ kɔfɛla bɛ to ka jɛya walima ka nɔgɔya.

Yala PVC frosted frosted fan fila bɛ sɔrɔ wa?

Awɔ. Mate walima frosted textures bɛ se ka dilan fan fila bɛɛ la.

Fɛnɲɛnɛma jumɛnw bɛ sɔrɔ?

HSQY bɛ a bɛɛ lajɛlen hakɛ fɔ min bɛ se milimɛtɛrɛ 0,06-2 ɲɔgɔn ma, ni milimɛtɛrɛ 0,10-2 ɲɔgɔn ye sɛbɛnw hakɛ ye min bɛ kɛ mɔgɔw fɛ.

Yala PVC finman min bɛ kɛ ni nɛnɛ ye, o bɛ dilan kurukuruw kɔnɔ wa?

Awɔ. Janikɛlan finman bɛnnenw bɛ se ka dilan i n’a fɔ master rolls walima slit rolls ka kɛɲɛ ni a bonya ni roll hakɛ wajibiyalenw ye.

Sɛbɛn hakɛ jumɛnw bɛ sɔrɔ?

Hakɛ minnu bɛ kɛ cogoya la, olu ye 700 × 1000mm, 750 × 1050mm, 915 × 1830mm ani 1220 × 2440mm ye, ni hakɛw bɛ sɔrɔ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

Yala PVC frosted bɛ se ka sɛbɛn wa?

Awɔ. Kalanso bɛnnenw bɛ se ka dɛmɛ don UV offset, ekran, UV inkjet ani nizɛri sɛbɛnni sugandilenw ma enki ni nɔrɔli sɛgɛsɛgɛliw kɔfɛ.

PVC min bɛ kɛ fan kelen fɛ, o fan jumɛn ka kan ka sɛbɛn?

Fɛn min bɛnnen don, o bɛ bɔ yecogo ɲininen ni tintin kɛcogo la. A fan matirilen ni a ɲɛda jɛlen ka kan ka sɛgɛsɛgɛ u danma.

Yala PVC frosted bɛ se ka kɛ ka kɛsu foli kɛ wa?

Awɔ. Grade semi-rigide bɛ se ka tigɛ die, ka score, ka foli, ka nɔrɔ walima ka welda ka don pakew kɔnɔ minnu bɛ yeelen bɔ.

Yala PVC min bɛ kɛ ni nɛnɛ ye, o bɛ kɛ fin ye ni a dabɔra wa?

Foli finman bɛ se ka kɛ ni fɛn, kurukuru juguman, funteni walima foli sira ma bɛn. Sɛnɛfɛnw dilanni kɔrɔbɔliw bɛ ladilikan di.

Yala PVC min bɛ kɛ ni nɛnɛ ye, o bɛ se ka kɛ gafe ɲɛw ye wa?

Awɔ. Sɛbɛn finman minnu bɛ kɛ ni nɛnɛ ye, olu bɛ kɛ ka rapɔɔriw, gafew, kayew, dumunifɛnw, gafew ani jiracogo ɲɛw dilan.

Yala A3 ni A4 datugulanw bɛ se ka kɛ ka kɛɲɛ ni mɔgɔw sago ye wa?

Awɔ. A3, A4, A5, Sɛbɛn, Sariya ani ladamu tigɛ hakɛw bɛ se ka baro kɛ.

Yala PVC frosted bɛ se ka die cut wa?

Awɔ. Kalanso bɛnnenw bɛ se ka tigɛ ni baarakɛminɛn nɔgɔlenw ye, ni yɔrɔ jɛlen ye ani ka tigɛ tansiyɔn kɔlɔsi.

Yala PVC frosted bɛ se ka kɛ thermoformé ye wa?

Furakɛcogo ɲuman bɛ se ka dilan ka kɛ blister packs ye, inserts, covers ani components customized.

Yala frosted texture bɛ to thermoforming kɔfɛ wa?

A kɛcogo bɛ se ka ye kosɛbɛ yɔrɔw la minnu sɔgɔlen don kosɛbɛ, o la, nɔgɔ yɛrɛ ni a dilanni juguya ka kan ka kɔrɔbɔ.

Yala PVC min bɛ kɛ ni nɛnɛ ye, o bɛ mɔgɔ dogoyɔrɔ dafalen di wa?

Ayi, danbe bɛ bɔ sisi, fɛn dilanni, yeelen, filɛli yɔrɔ ani sɛbɛnfura ni a kɔfɛfɛn cɛ janya la.

Yala PVC min bɛ kɛ ni nɛnɛ ye, o ye fɛn ye min sɛgɛsɛgɛlen don ka kɛnɛyaji kɛlɛ wa?

Matte surface bɛ se ka dɔ bɔ yelen yelen ye, nka optique anti-glare baarakɛcogo min sɛgɛsɛgɛra, o bɛ sɛgɛsɛgɛli ɲɛfɔlenw de wajibiya.

Yala PVC min bɛ kɛ ni nɛnɛ ye, o bɛ se ka kɛ kɛnɛma wa?

Kɛnɛma baara kuntaalajan bɛ fura dɔ de wajibiya min bɛ sabati ni UV ye, min dilannen don ani ka kɔrɔbɔ ka kɛɲɛ ni waati cogoya ni a tali waati makɔnɔnen ye.

Yala PVC frosted standard bɛ tasuma bali wa?

Tasuma kɛcogo man kan ka jate. Furakɛcogo kɛrɛnkɛrɛnnen ni sɛgɛsɛgɛli rapɔɔri min bɛ kɛ walasa ka a janya tigitigi ni a sɛgɛsɛgɛli kɛcogo jira, o de wajibiyalen don.

Yala PVC frosted antistatique bɛ sɔrɔ wa?

Antistatic grades bɛ se ka jateminɛ ka kɛɲɛ ni surface-resistance hakɛ wajibiyalen ye, nɛnɛ ani a kuntaala.

Yala PVC sɛbɛn bɛ se ka tigɛ ni laser ye wa?

PVC man kan ka tigɛ walima ka ja ni laser minɛn gansanw ye barisa gazi faratilenw ni buguri bɛ se ka bɔ. Masina tigɛcogo de ka ɲi.

PVC min bɛ kɛ ni nɛnɛ ye, o ka kan ka saniya cogo di?

Aw bɛ finimugu nɔgɔlen dɔ kɛ ni safinɛ ni ji nɔgɔlen ye. Aw bɛ aw yɛrɛ tanga fɛnɲɛnamafagalanw ma minnu bɛ sɔgɔsɔgɔ ni furajiw ye minnu bɛ se ka a yɔrɔ tiɲɛ.

Yala PVC frosted bɛ se ka segin ka kɛ fɛn wɛrɛ ye wa?

PVC dilanni fɛn saniyalenw bɛ se ka baara kɛ kokura fɛɛrɛko siratigɛ la, nka u lasegincogo yɛrɛ bɛ bɔ sigida lajɛyɔrɔw la, u tilatilali ani u lasegincogo.

Koman hakɛ fitinin ye mun ye?

MOQ sariyalen bɛ kilo 1000 ɲɔgɔn bɔ. Kulɛriw, fɛn dilannenw ani fura kɛrɛnkɛrɛnnenw minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka tɔni 3 ɲɔgɔn de wajibiya.

Yala misaliw bɛ sɔrɔ wa?

A4 sɛbɛn minnu bɛ yen, tigɛlenw walima kurukuru danmadɔw misaliw bɛ se ka sɔrɔ walasa ka sɛbɛnni kɛcogo lajɛ, ka sɛbɛnni kɛ, ka u da ani ka u dilan.

A dilanni ɲɛminɛ waati ye mun ye?

A ka c’a la, sɛnɛcogo jɔnjɔn bɛ tile 7-15 ɲɔgɔn ta, a ɲɛfɔcogo, a misali, a pakew ani a sarali dafalen kɔfɛ.

Kunnafoni jumɛnw de ka kan ka kɛ walasa ka quotation sɔrɔ?

Aw bɛ a janya, a bonya, a dicogo, a yɔrɔ faralen ɲɔgɔn kan, a kulɛri, a kɛcogo, a baaracogo, a hakɛ, a pakew ani a taayɔrɔ di.

Aw ye PVC Frosted Custom Quote sɔrɔ

HSQY Plastic Group ko la

HSQY Plastic Group bɛ PVC sɛbɛnw di minnu bɛ kɛ ni nɛnɛ ye, PVC sɛbɛnw jɛlenw, PVC filimuw minnu bɛ se ka sɛbɛn, sirilanw, PET sɛbɛnw, PP sɛbɛnw ani plastiki fɛnw minnu dilannen don ka kɛɲɛ ni mɔgɔw sago ye diɲɛ B2B kuntigiw ma.

HSQY bɛ dɛmɛ don pakew tigɛbagaw ma, sɛbɛnnikɛlanw, foli-kɛsu dilannikɛlaw, sɛbɛnnikɛlan iziniw, gafe-dakun dilannikɛlaw, jiralanw dilannikɛlaw, fɛnw donbagaw ani u feerelaw ni misali sɛgɛsɛgɛli ye, ka pakew dilanni kɛ ka kɛɲɛ ni mɔgɔw sago ye, ka sɛgɛsɛgɛli kɛ ani ka taa ni u ye jamana wɛrɛw la.

Quote ni Sample ɲini