Frost Pvc Agbalẽvi Plastik -HS-019

Frosted PVC Sheet na Nubablɛ, Agbalẽtata kple Agbalẽ ƒe Kpekpeɖeŋunuwo

HSQY wɔa PVC agbalẽ siwo me kɔ siwo wotsɔ tsikpe wɔe na aɖaka siwo woate ŋu abla, agbalẽtata, agbalẽ ƒe nutsyɔnu, agbalẽŋlɔnuwo, nubablɛ ƒe fesrewo, asitsaƒewo ƒe ɖeɖefiawo, ametakpɔnu siwo wotsɔ tsyɔ wo dzi kple plastik ƒe tɔtrɔ si wowɔ ɖe ɖoɖo nu.

HS-019 ƒe adzɔnuwo ƒoa kekeli ƒe kaka kple anyigba si ƒe amadede nye matte alo tsikpe si ɖea keklẽ tẽ dzi kpɔtɔna, si wɔnɛ be asibidɛwo ƒe dzesiwo megadzena tututu o eye wònaa kekeli ƒe dzedzeme fafɛ si me kɔ wu PVC si me kɔ si wokɔ la nu ƒu.

Titrime siwo li la tso abe 0.06mm va ɖo 2mm ene. Zi geɖe la, wotsɔa nɔnɔme tsɛwo naa amewo abe agbalẽ xatsaxatsa alo agbalẽ siwo wogbugbɔ trɔ ene, gake woate ŋu ana nɔnɔme siwo le kpekpem wu abe agbalẽ gbadzawo alo xɔtunu siwo wotso ɖe woƒe lolome nu ene.

Nusiwo woate ŋu awɔ le anyigba dzi dometɔ aɖewoe nye axa ɖeka ƒe tsikpe, axa eve ƒe tsikpe, matte/matte, matte/glossy, velvet/matte, tsikpe nyui, tsikpe ƒuƒu kple embossed nuwuwu siwo wowɔ ɖe ɖoɖo nu.

Woate ŋu akpɔ nusiwo wowɔna ɖaa le woƒe amadede siwo me kɔ alo esiwo me kɔ nyuie me. Woate ŋu ato amadede siwo me kɔ, amadede siwo me mekɔ o, vɔvɔli siwo wowɔ ɖe ɖoɖo nu kple agbalẽtata alo wɔwɔme ƒe dzesi siwo wozãna koŋ hã vɛ le nudɔdɔ ƒe agbɔsɔsɔ si wobia nu.

Gbedoxɔ me zazã ɣeyiɣi didi, nuɖuɖu ƒe kadodo, atikewɔwɔ me zazã, dzotsitsi ƒe dɔwɔwɔ, nusiwo tsia dzoxɔxɔ nu kple tsitretsitsi ɖe atike tɔxɛwo ŋu bia be woawɔ atike siwo dzi woda asi ɖo ɖe vovo kple nuŋlɔɖi siwo akpe ɖe eŋu.

Ne èdi nyatakaka siwo do ƒome kplii la, dzro eme HSQY PVC agbalẽtata ƒe agbalẽvi ƒe hatsotso kple PVC binding nutsyɔnu nuwɔna.

Bia Frosted PVC ƒe Asixɔxɔ    Bia Anyigba ƒe Kpɔɖeŋuwo

Frosted PVC Sheet Nusiwo Wowɔ ƒe Nɔnɔmetata

Nukae Nye Frosted PVC Transparent Sheet?

PVC ƒe agbalẽ si me kɔ si me tsikpe le nye polyvinyl chloride nusi te ŋu trɔna bɔbɔe, si mesẽna afã kple afã alo esi sesẽ, si ƒe anyigba ƒe nɔnɔme le nyuie si kakaa kekeli si woɖena fiana eye wòtsɔna yia teƒe bubuwo.

To vovo na PVC si me kɔ si wokɔ nyuie la, eƒe gowo nana wòdzena abe ɖe wòklẽna ene eye wòdoa viviti ɖe nusiwo le agbalẽa megbe ƒe akpa aɖe ŋu esime wògaɖea mɔ kekeli toa eme kokoko.

Le alesi nètiae nu la, agbalẽa ate ŋu anye matte ƒe nɔnɔme le axa ɖeka, axa eveawo alo matte ƒe akpa ɖeka kple axa ɖeka si wotsɔ blɔ ƒo ƒui.

Woɖɔa PVC si wotsɔ tsikpe wɔe hã be enye PVC si me kɔ matte, PVC film si me kɔ, vinyl matte sesẽ, PVC gbadzɛ si wotsɔ sanded wɔ, PVC si me kɔ si me tsikpe le alo PVC si me kɔ si me woŋlɔ nu ɖo.

HS-019 Frosted PVC Agbalẽvi ƒe Nɔnɔmewo

Ele be nɔnɔme mamlɛawo nagblɔ titrime ƒe mɔɖeɖe, didime, sesẽ, anyigba ƒe ƒoƒo ɖekae, nɔnɔme, amadede, nukpɔkpɔ ƒe dzedzeme, agbalẽtata ƒe ɖoɖo, ametakpɔnu-film ƒe nudidi kple dodokpɔ ƒe dzidzenu siwo sɔ.

Akpa Ðeka kple Axa Eve Frosted PVC

Frosted, Matte kple Dusted PVC Vovototowo

Nya siwo wozãna le anyigba dzi la toa vovo le nudzralawo dome. Wokafua ŋutilã me master sample ne nukpɔkpɔ ƒe nuwuwu le vevie.

PVC Film kple Sheet ƒe Titrime Mɔfiame

Sesẽme kple asitɔtrɔ si hiã hã nɔ te ɖe PVC ƒe wɔwɔme, plasticizer ƒe agbɔsɔsɔ, dzoxɔxɔ kple nusi wowɔ vɔ ƒe nɔnɔme dzi.

Kekeli ƒe Gbeƒãɖeɖe, Haze kple Adzamenyawo

PVC si wotsɔ tsikpe wɔe nana kekeli toa eme esime wòɖea nukpɔkpɔ tẽ kple keklẽ si woɖena fiana dzi kpɔtɔna.

Dzedzeme mamlɛtɔ nɔ te ɖe anyigba ƒe ƒuƒuiƒe, eƒe titrime, amadede, aŋɔ, nukpɔkpɔ ƒe didime, akaɖi ƒe mɔfiame kple didime si le agbalẽa kple nusi le megbe nɛ dome dzi.

Ele be nuƒlela siwo hiã be woakpɔ nukpɔkpɔ ƒe dɔwɔwɔ si dzi wokpɔna la nagblɔ kekeli ƒe kaka, afu, eme kɔ, keklẽ kple nukpɔkpɔ ƒe kpɔɖeŋu si dzi woda asi ɖo.

A general frosted surface menaa le eɖokui si adzame blibo, calibrated LED kaka, kakaɖedzi hotspot ɣla alo ɖaseɖigbalẽ anti-glare dɔwɔwɔ.

Agbalẽtata ɖe Frosted PVC Sheet dzi

Woateŋu azã Frosted PVC na agbalẽ siwo wota, agbalẽ ƒe akpawo, kaɖiwo, boblododo ɖeɖefiawo, ŋkɔwo, nuɖuɖuwo, agbalẽdzraɖoƒewo kple atsyɔ̃ɖoɖo ƒe nɔnɔmetatawo.

Axa si le matte kple akpa si wowɔ nyuie ate ŋu ana ink nalé ɖe eŋu eye wòadze abe ɖe wotae ene. Ele be woado akpa evea siaa kpɔ ne wole axa ɖeka ƒe tsikpe tiam.

Frosted PVC na Aɖaka Siwo Woate Ŋu Abla

Woate ŋu atso PVC si me tsikpe le afã kple afã, axɔ dzesi eye woaƒoe ɖe aɖaka siwo me kɔ nyuie me na atsyɔ̃ɖonuwo, nunanawo, agbalẽŋlɔnuwo, elektrɔnikmɔ̃wo, fefenuwo, awuwo kple boblododonuwo.

Anyigba si dzi tsikpe le la nana wòfa wu nusiwo wotsɔ blaa nu siwo me kɔ nyuie eye ate ŋu ana asibidɛwo alo anyigba ƒe dzesi suesuesuewo nagadze ƒã o.

Kpekpeɖeŋudɔwɔwɔ nɔ te ɖe agbalẽa ƒe titrime, sesẽme, mɔfiame, crease-se ƒe didime, dzesidede nyaƒoɖeamenu, yame ƒe dzoxɔxɔ kple babla ƒe duƒuƒu dzi.

Ele be ewɔwɔ dodokpɔwo nada asɔ le agbalẽ xatsaxatsa ɣi, gbagbã, spring-back, ink gbagbã, glue adhesion kple high-frequency alo ultrasonic welding sɔsɔ.

Frosted PVC na Agbalẽ kple Babla Kpekpeɖeŋunuwo

Wozãa PVC gbadzɛ siwo me tsikpe le tsɛwo le geɖe abe nutsyɔnu ene na nyatakakawo, mɔfiamegbalẽwo, agbalẽwo ƒe xexlẽdzesiwo, nuŋlɔɖigbalẽwo, sukudɔwo, nuɖuɖuwo kple nuɖeɖe ŋuti nuŋlɔɖiwo.

Anyigba si le keklẽm la ɖea tanya ƒe axaa ƒe akpa aɖe fiana esime wòɖea keklẽ kple asibidɛ siwo woate ŋu akpɔ dzi kpɔtɔna.

Zi geɖe la, wotiaa babla-nutsyɔnu ƒe titrime siwo bɔ tso nusiwo wowɔ ƒe akpa si le tsɛ wu me le alesi wòhiã be wòate ŋu atrɔ ɖe nɔnɔmewo ŋu, sesẽme kple babla-mɔ̃ ƒe ŋutete nu.

Woate ŋu adzro A3, A4, A5, Lɛta, Senyawo kple lãɖeɖe ƒe lolome siwo wowɔ ɖe ɖoɖo nu me na binding-cover programs siwo wowu enu.

Nubablɛwo Kple Nuwo Ðeɖefia Dɔwɔɖoɖowo

• Aɖaka siwo woate ŋu abla: Nubablɛ siwo me kɔ nyuie na atsyɔ̃ɖomiwo, nunanawo, agbalẽŋlɔnuwo, awuwo kple elektrɔnikmɔ̃wo.

• Fesre siwo wotsɔ blaa nu: Fesre siwo me tsikpe le siwo ɖea nusi wobla ɖe agba me ƒe akpa aɖe fiana.

• Agbalẽ ƒe akpawo: Nyatakakawo ƒe akpawo, nuŋlɔɖigbalẽ ƒe akpawo, nuɖuɖuwo kple nuŋlɔɖiwo takpɔkpɔ.

• Agbalẽtata: Kpekpeɖeŋugbalẽviwo, ŋkɔwo, dzesiwo, boblododowo kple atsyɔ̃ɖoɖo ƒe nɔnɔmetatawo.

• Asitsaƒewo ƒe nukpɔkpɔwo: Nusiwo wotsɔ dea agbalẽdzraɖoƒe, nusiwo woɖena fiana ƒe mamawo, nusiwo wodzrana ƒe nudzraɖoƒewo kple POP ƒe akpawo.

• Nuŋlɔtiwo: Agbalẽdzraɖoƒewo, mamanuwo, nuŋlɔɖiwo ƒe gakotokuwo, axadzikpɔnuwo kple ɣletigbalẽa ƒe akpa aɖewo.

• Ametakpɔnu ƒe nutsyɔnu: Menu ƒe nutsyɔnu, nɔnɔmetata ƒe nutsyɔnu, abɔta kple dɔwɔƒewo ƒe mamãnuwo.

• Atsyɔ̃ɖoɖo ƒe akpawo: Nusiwo wotsɔ dea xɔme alo wodo alɔe siwo me kɔ nyuie kple ememe nukpɔkpɔ ƒe akpawo.

Thermoforming kple Blister Dɔwɔwɔwo

Woate ŋu awɔ thermoforming-grade frosted PVC sheet si sɔ wòazu blister packs, packaging inserts, trays, covers kple atsyɔ̃ɖoɖo ƒe akpawo.

Ele be woatrɔ asi le dzoxɔxɔ si wowɔna, dzoxɔxɔ ƒe ɣeyiɣi, aŋɔ ƒe dzoxɔxɔ, do ƒe goglome, dzogoe ƒe didime, fafa kple agbalẽ ƒe nɔnɔme ŋu wòanyo wu na titrime si wotia.

Gogloƒe wɔwɔ ate ŋu akeke alo aɖe tsikpe ƒe nɔnɔme si woate ŋu akpɔ le teƒe siwo wota ŋutɔ la dzi akpɔtɔ.

Ele be woalé ŋku ɖe kpɔɖeŋu siwo wowɔ ŋu be woma gli ƒe titrime, woƒe nɔnɔme ƒe léle ɖe te, woƒe nukpɔkpɔ le gaglãgbe, woƒe gbagbã, woƒe ʋuʋu kple woƒe didime ƒe liƒo hã.

Xɔme, Gbedoxɔ me kple PVC ƒe Dzeside Tɔxɛwo

Mele be woagblɔ le eɖokui si be PVC si wozãna ɖaa la te ŋu nɔa te ɖe gota tegbee, esi tsia dzodzodzoe nu, si me dzo mate ŋu age ɖo o alo woda asi ɖe edzi na dɔwɔwɔ siwo ŋu wowɔ ɖoɖo ɖo o.

PVC si wotsɔ tsikpe wɔe tsɔ wu PET, PP kple Acrylic

Lãɖeɖe, Babla kple Fabrication Dedienɔnɔ

• Woateŋu atso PVC tsɛwo to hɛ, guillotines, shears kple slitting dɔwɔnu siwo sɔ zazã me.

• Woate ŋu atso ewɔwɔ ƒe akpawo, aƒo wo, aku wo alo atsɔ mɔ̃ akplɔ wo.

• Dɔwɔnu ɖaɖɛwo kpena ɖe ame ŋu be woaɖe ʋuʋudedi, nuteɖeamedzi ƒe ɣie kple gbagbã si dzi womeɖu o dzi kpɔtɔna.

• Ele be woado dzesidede ƒe goglome, nuku ƒe mɔfiame kple babla ƒe dzoxɔxɔ kpɔ hafi woawɔ folding-box.

• High-frequency, dzoxɔxɔ kple ultrasonic ƒoƒo ƒu mɔnuwo bia dodokpɔ siwo ku ɖe dɔwɔwɔ koŋ ŋu.

• Adhesive ƒe kadodo bia be woawɔ adhesive si sɔ kple PVC eye woadoe kpɔ be eme kɔ, ŋusẽ le eŋu eye wòʋuna hã.

• Ele be woazã ya si sɔ le dzoxɔxɔ, wɔwɔ kple xɔtutudɔwo me.

• Mele be woatsɔ laser-dɔwɔnu dzrowo atso PVC alo aŋlɔe o elabena ya alo ke siwo me afɔku le ate ŋu ado tso eme.

Dodokpɔ Siwo Wokafu be Woatsɔ Akpɔ Dzedzeme Dzi

• PVC resin kple additive ƒe kpeɖodzi.

• Titrime kple titrime ƒe mɔɖeɖe ɖe nu ŋu.

• Roll ƒe kekeme, agbalẽ ƒe didime kple diagonal tolerance.

• Flatness, curl, winding ƒe nyonyome kple nugbɔ nɔnɔme.

• Frosted texture ƒe ɖekawɔwɔ.

• Anyigba ƒe keklẽ kple eƒe ƒuƒuiƒe.

• Kekeli ƒe kaka, ahomya kple eme kɔ le afisi wogblɔe le.

• Amadede kple amadede ƒe ɖekawɔwɔ tso hatsotso ɖeka me.

• Teƒe yibɔwo, gel, kristalo teƒewo, sisi ƒe fliwo kple ɖiƒoƒo.

• Tensile ŋusẽ, elongation kple impact dɔwɔwɔ.

• Agbalẽtata ƒe adhesion kple abrasion tsitretsitsi.

• Die-cutting, scoring kple fold-whitening dodokpɔwo.

• Dzoxɔxɔ ƒe wɔwɔme kple nɔnɔme-léle ɖe te ƒe dodokpɔwo.

• Glue, welding kple lamination ƒe ɖekawɔwɔ.

• Antistatic, UV alo dzo dodokpɔ hena dzesi tɔxɛwo.

• Ametakpɔnu-film adhesion kple eɖeɖeɖa ƒe dɔwɔwɔ.

• Packing, pallet kple nugoe-agbawo me dzodzro.

Trɔ asi le Frosted PVC Agbalẽvi Tiatiawɔblɔɖe

• Eƒe titrime tso abe 0.06mm va ɖo 2mm ene.

• Master rolls, slit rolls, agbalẽ gbadzawo kple kakɛ siwo wotso.

• Agbalẽvi ƒe didime siwo sɔ kple esiwo wowɔ ɖe ɖoɖo nu.

• Amadede siwo me kɔ, siwo me kɔ, siwo me kɔ, siwo me kɔ kple amadede siwo me mekɔ o.

• Axa ɖeka kple axa eve ƒe anyigba siwo dzi tsikpe le.

• Matte/matte, matte/glossy kple velvet/matte ƒe ƒuƒoƒo.

• Nu nyui, titina, coarse kple orange-peel textures.

• Agbalẽtata, folding-box kple thermoforming ƒe dzesiwo.

• UV-si li ke, antistatic kple dzo-xe mɔ na atikewo.

• Axa ɖeka alo axa eve ƒe ametakpɔnu film.

• A3, A4, A5, Lɛta kple babla-kpa ƒe lolome siwo wowɔ ɖe ɖoɖo nu.

• Nuŋlɔɖi siwo wowɔ ɖe ɖoɖo nu, kakɛwo, palletwo kple agbalẽɖoɖoɖa ƒe dzesiwo.

Nyatakaka Siwo Hiã Na Nyayɔyɔ

• Wobia be wòanye titrime kple mɔɖeɖe ɖe nu ŋu.

• Roll ƒe kekeme alo agbalẽa ƒe didime.

• Roll, agbalẽ alo lãɖeɖe-nuzazã ƒe nɔnɔme.

• Wobia be woawɔ nu sesẽ alo atrɔ ɖe nɔnɔmewo ŋu.

• Dzedzeme si me kɔ, amadede alo esi me mekɔ o.

• Akpa ɖeka alo axa eve ƒe frosted nuwuwu.

• Nu nyui, titina, coarse alo customized texture.

• Kekeli ƒe kaka si hiã, haze alo gloss.

• Agbalẽtata dɔwɔnuwo, ink kple curing mɔnu.

• Die-lãɖeɖe, dzesidede, babla alo thermoforming ƒe ɖoɖo.

• Xɔme alo gota zazã.

• UV, antistatic, dzo alo dzoxɔxɔ si bɔbɔ ƒe nudidiwo.

• Ametakpɔnu-film ƒe nudidi.

• Dodokpɔ ŋuti nyatakaka siwo hiã kple asi si me woayi.

• Agbɔsɔsɔ gbãtɔ kple ƒe sia ƒe ƒe didi si wobu.

• Packaging, destination port kple ŋkeke si wobia be woatsɔe ayi.

Ðo Wò Frosted PVC Nudidiwo ɖa

Mɔ̃ɖaŋu Ŋuti Nyatakakawo Kple Dodokpɔ Ŋuti Nyatakakawo

Wodzra PVC clear sheet data sheet si li kple PVC sheet test report ɖo ɖe ete hena numekuku.

Hafi nàzã nuŋlɔɖi eveawo dometɔ ɖesiaɖe hena nuƒle, aɖaŋuwɔwɔ alo ɖoɖowɔwɔ ƒe taɖodzinuwo la, ɖo kpe edzi be eku ɖe HS-019 ƒe wɔwɔme, eƒe titrime, eƒe anyigba, amadede, teƒe si wowɔe le kple ewɔwɔ ƒe hatsotso si tututu wowɔ ŋu.

   Wɔ PVC Clear Sheet ƒe Nyatakakagbalẽvi ƒe kɔpi

   Wɔ PVC Sheet Dodokpɔ Ŋuti Nyatakaka ƒe kɔpi

Ðaseɖigbalẽwo Kple Sedziwɔwɔ Ŋuti Nuŋlɔɖiwo

Nuŋlɔɖi siwo li ate ŋu anye mɔ̃ɖaŋu ŋuti nyatakakawo, dedienɔnɔ ŋuti nyatakaka gbalẽviwo, nunɔamesi ŋutɔŋutɔwo ŋuti nyatakakawo, atike siwo ŋu seɖoƒe le ŋuti nyatakakawo kple nyonyomedzikpɔkpɔ ŋuti ɖaseɖigbalẽwo.

Ele be woaɖɔ SGS le dodokpɔ si tututu wowu enu nu tsɔ wu be woatsɔe afia abe xexeame katã ƒe adzɔnuwo ƒe ɖaseɖigbalẽ ene.

Ele be woalé ŋku ɖe ɖaseɖigbalẽa tɔ, afisi wowɔe le, tata si wozãna ɖaa, ɖaseɖigbalẽa ƒe lolome kple ISO ɖaseɖigbalẽ ɖesiaɖe ƒe dɔwɔwɔ ƒe ɣeyiɣi ŋu hafi woatae.

ISO 9001 nye nyonyome-dzikpɔkpɔ-ɖoɖo ƒe dzidzenu eye meɖoa nuɖuɖu-kadodo, atikewɔwɔ, dzotsitsi alo nutome ƒe sedziwɔwɔ ɖe PVC-gbalẽvia dzi le eɖokui si o.

Nubablɛwo Kple Wo Ðoɖoɖa

Kpɔɖeŋuwo ƒe babla: Woate ŋu atsɔ PE kotokuwo kple kakɛ sesẽwo akpɔ A4 agbalẽwo kple kpɔɖeŋu sue siwo wotso ta.

Roll packing: Woate ŋu abla PVC rolls tsɛwo kple PE film, kraft pepa, tsi si me tsi mele o kple nugbɔ takpɔkpɔ.

Sheet packing: Reference sheet packages ƒe kpekpeme anɔ abe 30kg ene, alo woatrɔ asi le wo ŋu le woƒe didime kple wo ŋudɔwɔwɔ ƒe nudidiwo nu.

Takpɔkpɔ le anyigba dzi: Woate ŋu aƒo nu tso PE babla, nusiwo le ƒuƒoƒo dome alo ametakpɔnu film ŋu na nusiwo hiã takpɔkpɔ tso ʋuʋudedi me.

Pallet packing: Nufiame pallet agbatsɔtsɔ anɔ abe 500-2000kg le agbalẽa ƒe lolome kple seɖoƒewo nu.

Agbatsɔtsɔ le nugoe me: Agba si wotsɔ dea nu me la ade tɔn 20, le nusiwo wowɔ ƒe didime, pallet ƒe ɖoɖo kple mɔxexe ɖe kpekpeme nu le se nu nu.

Ɣeyiɣi si woatsɔ awɔe: Zi geɖe la, nusiwo wowɔna ɖaa hiã abe ŋkeke 7-15 ene le woƒe nɔnɔme, kpɔɖeŋu, babla kple fexexe ƒe kpeɖodzi megbe.

Nukatae Nàtia HSQY be wòanye Wò Frosted PVC Sheet Dɔwɔƒe?

• Eƒe titrime tso abe 0.06mm va ɖo 2mm ene.

• Rolls, sheets kple cut-to-lolome nuzazã ƒe nɔnɔmewo.

• Axa ɖeka kple axa eve ƒe anyigba siwo dzi tsikpe le.

• Nu nyui, ƒuƒui, matte, velvet kple embossed textures.

• Amadede siwo me kɔ, siwo ƒe amadede le vovovo, siwo me kɔ eye womedzena nyuie o.

• Agbalẽtata, agbalẽxatsa-aɖaka, babla-kpa kple wɔwɔme ƒe dzesiwo.

• Kpɔɖeŋuwo na nukpɔkpɔ, agbalẽtata kple agbalẽ xatsaxatsa ƒe dodokpɔ.

• Dekɔnu slitting, sheeting kple lãɖeɖe-lolome kpekpeɖeŋu.

• Ametakpɔnu-film kple export-packing tiatia.

• Dzodzro le nɔnɔme siwo dzi woda asi ɖo nu.

Hafi woawɔ nu geɖe la, HSQY kafui be woado nusi wotia la kpɔ to asisi la ƒe agbalẽtamɔ̃ ŋutɔŋutɔ, nuŋlɔtsi, dɔwɔnu si wotsɔ lãa nu, babla ƒe mɔnu, dzoxɔxɔ ƒe mɔ̃ kple nusiwo wowɔ vɔ ƒe nɔnɔme zazã me.

Te ɖe HSQY ŋu hena Kpɔɖeŋuwo kple Asixɔxɔ

Nya Siwo Wobiaa Enuenu Tso Frosted PVC Sheets Ŋu

Nukae nye PVC si me tsikpe le si me kɔ?

Enye PVC film alo agbalẽ si me kɔ alo si me kɔ nyuie si ƒe akpa dzi woŋlɔ nu ɖo si ɖea keklẽ dzi kpɔtɔna eye wòdoa viviti ɖe nusiwo le nusi wotsɔ wɔe megbe ƒe akpa aɖe ŋu.

Nukae wozãna na HS-019 frosted PVC sheet la?

Wozãnɛ koŋ na aɖaka siwo wobla, agbalẽtata, agbalẽ ƒe akpatawo, agbalẽŋlɔnuwo, nubablɛ ƒe fesrewo, nusiwo woɖena fiana kple ametakpɔnu siwo wotsɔ tsyɔa wo dzi.

Ðe PVC si wotsɔ tsikpe wɔe la sɔ kple matte PVC?

Wozãa nya siawo zi geɖe na nu mawo tɔgbe, gake PVC si wotsɔ tsikpe wɔe ate ŋu akpɔ nukpɔkpɔ ƒe kaka sesẽ wu, evɔ matte PVC ya ate ŋu aɖɔ anyigba si me keklẽ mele o koŋ.

Vovototo kae le matte kple PVC si me ke le dome?

Wotia Matte PVC na nukpɔkpɔ ƒe nuwuwu si ƒe keklẽ mebɔ o. Anyigba si dzi ke le bɔbɔe ate ŋu aɖe mɔxexe ɖe agbalẽwo dome nu dzi akpɔtɔ koŋ esime wòle dzedzem nyuie wu.

Ðe PVC si wotsɔ tsikpe wɔe si ƒe akpa ɖeka li?

Ɛ̃. Akpa ɖeka ate ŋu anye esi me tsikpe alo matte le esime megbea ya gakpɔtɔ le blɔ alo le blɔ wu.

Ðe PVC si wotsɔ tsikpe wɔe si ƒe axa eve le la lia?

Ɛ̃. Woate ŋu awɔ amadede siwo nye matte alo frosted textures le akpa eveawo siaa.

Titrime kawoe li?

HSQY yɔ eƒe didime bliboa si ade 0.06-2mm, eye abe 0.10-2mm ene nye agbalẽ ƒe didime si bɔ.

Ðe wotsɔa PVC tsɛ si wotsɔ tsikpe wɔe la naa amewo le agbalẽ xatsaxatsawo mea?

Ɛ̃. Woate ŋu ana gauge tsɛ siwo sɔ abe master rolls alo slit rolls ene le kekeme kple roll ƒe didime si hiã nu.

Agbalẽvi ƒe lolome kawoe li?

Agbɔsɔsɔme siwo wozãna ɖaa dometɔ aɖewoe nye 700 × 1000mm, 750 × 1050mm, 915 × 1830mm kple 1220 × 2440mm, eye lolome siwo wowɔ ɖe ɖoɖo nu li.

Ðe woate ŋu ata PVC si wotsɔ tsikpe wɔea?

Ɛ̃. Dzeside siwo sɔ ateŋu ado alɔ UV offset, screen, UV inkjet kple digital tata tiatia le ink kple adhesion dodokpɔwo megbe.

PVC si wotsɔ tsikpe ƒo axa ɖeka ƒe akpa kae wòle be woata?

Akpa si sɔ la nɔ te ɖe nukpɔkpɔ ƒe ŋusẽkpɔɖeamedzi kple nuŋlɔtsi ƒe ɖoɖo si wodi dzi. Ele be woado axa siwo ƒe amadede nye matte kple esiwo wowɔ nyuie la akpɔ ɖe vovo.

Ðe woate ŋu azã PVC si wotsɔ tsikpe wɔe atsɔ abla aɖakawoa?

Ɛ̃. Woate ŋu atso dzesi siwo sesẽ afã kple afã, axɔ dzesi, abla wo, alé wo ɖe wo nɔewo ŋu alo atsɔ ga aƒo wo ɖe aɖaka siwo me kɔ nyuie me.

Ðe PVC si wotsɔ tsikpe wɔe la trɔna zua ɣie ne woxatsaea?

Fold whitening ateŋu adzɔ ne nusi wotsɔ wɔe, crease depth, temperature alo folding direction mesɔ o. Wokafui be woado ewɔwɔ kpɔ.

Ðe woate ŋu azã PVC si wotsɔ tsikpe wɔe na agbalẽwo ƒe akpawoa?

Ɛ̃. Wozãa agbalẽvi tsɛ siwo wotsɔ tsikpe wɔe hena nyatakakawo, mɔfiamegbalẽwo, nuŋlɔɖigbalẽwo, nuɖuɖuwo, agbalẽwo ƒe xexlẽdzesiwo kple nuƒoƒo ƒe akpatawo.

Ðe woate ŋu atrɔ asi le A3 kple A4 ƒe nutsyɔnuawo ŋua?

Ɛ̃. Woate ŋu adzro A3, A4, A5, Lɛta, Se kple dekɔnu lãɖeɖe ƒe lolomewo me.

Ðe woate ŋu atso PVC si wotsɔ tsikpe wɔe la wòakua?

Ɛ̃. Woate ŋu atsɔ dɔwɔnu ɖaɖɛwo, ʋuʋu si sɔ kple lãɖeɖe ƒe nyaƒoɖeamenu si dzi wokpɔna atso dzesi siwo sɔ.

Ðe woate ŋu awɔ PVC si wotsɔ tsikpe wɔe wòazu dzoxɔxɔa?

Woate ŋu awɔ dzoxɔxɔ ƒe wɔwɔme ƒe hatsotso si sɔ wòazu blister packs, inserts, covers kple components siwo wowɔ ɖe ɖoɖo nu.

Ðe tsikpe ƒe nɔnɔme gakpɔtɔ nɔa anyi le dzoxɔxɔ ƒe nɔnɔme wɔwɔ vɔ megbea?

Nusiwo wotsɔ wɔe ate ŋu magadze le teƒe siwo keke ŋutɔ o, eyata ele be woado aŋɔ ŋutɔŋutɔ kple alesi wowɔe ƒe goglome kpɔ.

Ðe PVC si wotsɔ tsikpe wɔe naa ame ŋutɔ ƒe nyawo nɔa ɣaɣla bliboea?

Ao, ame ŋutɔ ƒe nyawo gbɔ kpɔkpɔ nɔ te ɖe aŋɔ, nɔnɔme, akaɖi, nukpɔkpɔ ƒe didime kple didime si le agbalẽa kple nusi le megbe nɛ dome dzi.

Ðe PVC si wotsɔ tsikpe wɔe nye nusi ŋu woɖo kpee be wòaxe mɔ ɖe keklẽ nua?

Matte ƒe anyigba ate ŋu aɖe nukpɔkpɔ ƒe keklẽ dzi akpɔtɔ, gake kpeɖodzi si ŋu woɖo kpee be optical anti-glare dɔwɔwɔ bia dodokpɔ si me kɔ.

Ðe woate ŋu azã PVC si wotsɔ tsikpe wɔe le gotaa?

Gbedoxɔ me zazã ɣeyiɣi didi bia be woawɔ atike si me UV-si li ke le eye woadoe kpɔ le yame ƒe nɔnɔme kple ɣeyiɣi si wokpɔ mɔ be woatsɔ akpɔe ta.

Ðe PVC si wotsɔ tsikpe wɔe si wozãna ɖaa la mete ŋu xɔa dzo oa?

Mele be woatsɔe be dzo ƒe dɔwɔwɔ o. Wobia be woawɔ atike si wowɔ kple dodokpɔ ŋuti nyatakaka si woɖo ɖi na eƒe titrime kple dodokpɔ ƒe dzidzenu si sɔ pɛpɛpɛ.

Ðe antistatic frosted PVC lia?

Woateŋu ada antistatic ƒe dzesiwo kpɔ le anyigba ƒe tsitretsitsi ƒe didime, fafa kple ɣeyiɣi didi si wobia nu.

Ðe woate ŋu atsɔ laser atso PVC-gbadzɛa?

Mele be woatsɔ laser-dɔwɔnu dzrowo atso PVC alo aŋlɔe o elabena ya siwo me afɔku le kple ke ate ŋu ado tso eme. Wokafui be woatsɔ mɔ̃ atsoe.

Aleke wòle be woakɔ PVC si wotsɔ tsikpe wɔe ŋui?

Zã avɔ falɛfalɛ si me adzalẽ fafɛ kple tsi le. Ƒo asa na abrasive pads kple aggressive solvents siwo ate ŋu agblẽ nu le anyigba ŋu.

Ðe woate ŋu agbugbɔ PVC si wotsɔ tsikpe wɔe la awɔ dɔa?

Woate ŋu agbugbɔ atrɔ asi le PVC wɔwɔ ƒe kakɛ siwo le dzadzɛ ŋu le mɔ̃ɖaŋununya nu, gake wo gbugbɔgazã ŋutɔŋutɔ nɔ te ɖe nutoa me nuƒoƒoƒu, vovototodedeameme kple wo gbugbɔgazã ƒe dɔwɔƒewo dzi.

Nukae nye nudɔdɔ ƒe agbɔsɔsɔ suetɔ kekeake?

MOQ si wozãna ɖaa la ade 1000kg. Amadede, nɔnɔme kple atike tɔxɛ siwo wowɔ ɖe ɖoɖo nu ate ŋu abia abe tɔn 3 ene.

Ðe kpɔɖeŋuwo lia?

A4 ƒe agbalẽ siwo li fifia, kakɛ siwo wotso alo agbalẽ xatsaxatsa ƒe kpɔɖeŋu siwo seɖoƒe li na ate ŋu anɔ anyi hena ŋkuléle ɖe woƒe nɔnɔme ŋu, wo tata, wo babla kple wo wɔwɔ.

Nukae nye ɣeyiɣi si woatsɔ awɔe?

Zi geɖe la, standard production xɔa abe ŋkeke 7-15 le kpeɖodzi, kpɔɖeŋu, packing kple fexexe megbe.

Nyatakaka kawoe hiã hafi woate ŋu ayɔ nyayɔyɔ?

Na eƒe titrime, didime, nana ƒe nɔnɔme, anyigba ƒe ƒuƒoƒo, amadede, dɔwɔwɔ, dɔwɔwɔ ƒe mɔnu, agbɔsɔsɔme, babla kple yiyi.

Na PVC Quote si Wowɔ Ðekae na Frosted

Ku ɖe HSQY Plastic Group ŋu

HSQY Plastic Group naa frosted PVC agbalẽwo, PVC agbalẽ siwo me kɔ, PVC film siwo woate ŋu ata, babla nutsyɔnu, PET agbalẽwo, PP agbalẽwo kple plastic nu siwo wowɔ ɖe ɖoɖo nu na dukɔwo dome B2B asisiwo.

HSQY doa alɔ nubablɛ trɔlawo, agbalẽtamɔ̃wo, agbalẽ xatsaxatsa-aɖaka wɔlawo, agbalẽŋlɔmɔ̃ dɔwɔƒewo, agbalẽ-kpa wɔlawo, ɖeɖefia wɔlawo, nusiwo wotsɔ tso duta vɛ kple mamalawo kple kpɔɖeŋu dodokpɔ, wɔwɔ ɖe ɖoɖo nu, ŋkuléle ɖe nu ŋu kple nusiwo wotsɔ ɖoa ​​duta ƒe nubablɛwo.

Bia Nya Siwo Woagblɔ Kple Kpɔɖeŋu