Rufin filastik na sanyi -HS-019

Frosted PVC takardar don Marufi, Bugawa da Murfin Littattafai

HSQY tana ƙera kwalaye masu haske masu launin ruwan kasa PVC takardar abu don akwatunan naɗewa, bugawa, murfin littattafai, kayan rubutu, tagogi masu marufi, nunin kaya, rufin kariya da kuma canza filastik na musamman.

Jerin samfuran HS-019 sun haɗa da watsa haske tare da saman matte ko mai sanyi wanda ke rage haske kai tsaye, yana sa yatsun hannu ba su da ganuwa kuma yana haifar da bayyanar haske mai laushi fiye da gogewa mai haske PVC .

Kauri da ake da shi ya kama daga kimanin 0.06mm zuwa 2mm. Ana bayar da ƙayyadaddun ƙayyadaddun bayanai na musamman a matsayin birgima ko kuma waɗanda aka canza takardar abu s, yayin da ƙayyadaddun ƙayyadaddun bayanai masu kauri za a iya bayar da su a matsayin faifan takardar abu s mai faɗi ko kuma a matsayin allunan da aka yanke zuwa girman da aka yanke.

Zaɓuɓɓukan saman sun haɗa da frosted gefe ɗaya, frosted gefe biyu, matte/matte, matte/glossy, velvet/matte, frosted mai kyau, frosted mai kauri da kuma created embossed gama-gari.

Ana samun samfuran da aka saba da su a cikin launuka masu haske ko masu haske. Launuka masu haske, launuka marasa haske, launuka na musamman da kuma bugu ko matakan tsari na musamman bisa ga adadin da ake buƙata.

Amfani da shi a waje na dogon lokaci, hulɗa da abinci, amfani da shi a asibiti, aikin hana harshen wuta, halayen hana rikicewa da kuma juriya ga takamaiman sinadarai suna buƙatar takamaiman tsari da takaddun tallafi.

Don kayan da suka shafi, duba HSQY PVC bugu takardar abu kewayon da PVC Kayayyakin murfin ɗaurewa.

Nemi Farashi Mai Tsafta PVC    Nemi Samfuran Sama

Hoton Samfurin da aka yi wa sanyi PVC takardar

Menene Takardar da aka yi wa Frosted PVC Mai haske?

Mai haske PVC mai sanyi takardar abu abu ne mai sassauƙa, mai ɗan tauri ko kuma mai tauri na polyvinyl chloride tare da saman da aka yi wa ado mai laushi wanda ke warwatsa haske mai haske da kuma watsa shi.

Ba kamar gogewar haske PVC ba, saman yana samar da kamanni mai haske kuma yana ɓoye wasu bayanai a bayan takardar abu yayin da har yanzu yana barin haske ya ratsa ta.

Dangane da ƙarshen da aka zaɓa, takardar abu na iya samun laushi mai laushi a gefe ɗaya, ɓangarorin biyu ko haɗin gefen matte ɗaya da gefe ɗaya mai gogewa.

Ana kuma bayyana Frosted PVC a matsayin matte clear PVC , translucent PVC film, stricked matte vinyl, sanded PVC takardar abu , frosty clear PVC ko textured translucent PVC .

Bayani dalla-dalla na HS-019 Frosted PVC takardar

Bayanan ƙarshe yakamata su bayyana juriyar kauri, girma, tauri, haɗin saman, laushi, launi, bayyanar gani, tsarin bugawa, buƙatun fim ɗin kariya da ƙa'idodin gwaji masu dacewa.

Gefe ɗaya da kuma gefe biyu mai sanyi PVC

Bambance-bambancen da aka yi da santsi, matte da kuma dusted PVC

Kalmomin saman sun bambanta tsakanin masu samar da kayayyaki. Ana ba da shawarar a yi samfurin musamman na zahiri idan kammalawar gani tana da mahimmanci.

PVC Jagorar Kauri da Fim

Taurin kai da sassaucin da ake buƙata suma sun dogara ne akan tsarin PVC , abun da ke cikin na'urar plasticizer, zafin jiki da ƙirar samfurin da aka gama.

Watsa Haske, Hazo da Sirri

Frosted PVC yana ba da damar haske ya ratsa yayin da yake rage gani kai tsaye da kuma hasken da ke nuna haske.

Bayyanar ƙarshe ta dogara ne da ƙaiƙayin saman, kauri, launi, hazo, nisan kallo, alkiblar haske da kuma nisan da ke tsakanin takardar abu da abin da ke bayansa.

Masu siye da ke buƙatar aikin gani mai sarrafawa ya kamata su ƙayyade watsa haske, hazo, haske, sheƙi da kuma samfurin gani da aka amince da shi.

Fuskar da aka yi da sanyi ba ta samar da cikakken sirri ta atomatik, yaɗuwar LED mai daidaito, ɓoyayyen hotspot ko kuma ingantaccen aikin hana walƙiya.

Bugawa akan Frosted PVC takardar

Ana iya amfani da Frosted PVC don marufi da aka buga, murfin littattafai, katuna, nunin talla, lakabi, menus, manyan fayiloli da zane-zanen ado.

Gefen da aka goge da kuma gefen da aka matse na iya samar da mannewar tawada daban-daban da kuma kamannin da aka buga. Ya kamata a gwada ɓangarorin biyu lokacin da aka zaɓi kayan da aka yi wa fenti na gefe ɗaya.

Akwatunan da aka naɗe PVC don Naɗewa

Ana iya yankewa, a naɗe shi a cikin akwatunan marufi masu haske don kayan kwalliya, kyaututtuka, PVC rubutu, kayan lantarki, kayan wasa, tufafi da kayayyakin talla.

Fuskar da aka yi da sanyi tana haifar da laushi fiye da marufi mai tsabta kuma tana iya sa a rage ganin yatsun hannu ko ƙananan alamun saman.

Aikin naɗewa ya dogara da kauri takardar abu , tauri, yanayin daidaitawa, girman ƙa'idar crease-roule, matsin lamba, zafin yanayi da saurin naɗewa.

Gwaje-gwajen samarwa ya kamata su kimanta farin naɗewa, fashewa, fashewar bazara, fashewar tawada, mannewa da kuma dacewa da walda mai yawan mita ko ultrasonic.

Rufin Littafi da Rufin Ɗaurewa PVC

Ana amfani da Thin frosted PVC takardar abu s sosai a matsayin murfin rahotanni, littattafai, kasida, littattafan rubutu, ayyukan makaranta, menus da takardun gabatarwa.

Fuskar da ke da haske tana nuna shafin taken wani ɓangare yayin da take rage hasken haske da kuma alamun yatsan hannu da ake iya gani.

Ana zaɓar kauri na murfin ɗaurewa gabaɗaya daga siraran ɓangaren samfurin gwargwadon sassaucin da ake buƙata, tauri da ƙarfin ɗaurewa.

Ana iya tattauna A3, A4, A5, Harafi, Girman yanke na doka da na musamman don shirye-shiryen rufe-rufe da aka gama.

Marufi da Aikace-aikacen Nuni

• Akwatunan da ke naɗewa: Marufi mai haske don kayan kwalliya, kyaututtuka, kayan rubutu, tufafi da na'urorin lantarki.

• Tagogi masu marufi: Tagogi masu sanyi waɗanda ke bayyana samfurin da aka shirya.

• Murfin littattafai: Murfin rahoto, murfin littafin rubutu, menus da kariyar takardu.

• Bugawa: Katuna, lakabi, alamu, nunin talla da zane-zanen ado.

• Nunin siyarwa: Abubuwan da aka saka a cikin shiryayye, masu raba nuni, masu riƙe samfura da abubuwan POP.

• Kayan rubutu: Fayiloli, masu rabawa, walat ɗin takardu, masu kare shafi da abubuwan kalanda.

• Rufewar kariya: Murfin menu, rufin zane, hannun riga da kuma raba kayan masana'antu.

• Allon ado: An saka firam ko kuma an tallafa masa da kayan aikin nuni na ciki.

Aikace-aikacen Thermoforming da Blister

Za a iya samar da wani nau'in frosted mai tsari mai kyau PVC takardar abu mai siffar thermoforming zuwa fakitin blister, abubuwan da aka saka a cikin marufi, tire , murfin da kayan ado.

Ya kamata a inganta yanayin zafin da aka samar, lokacin dumama, zafin mold, zurfin rami, radius na kusurwa, sanyaya da kuma yanayin takardar abu don kauri da aka zaɓa.

Zurfin samuwar zai iya shimfiɗa ko rage yanayin da ke da sanyi a wurare masu matuƙar jan hankali.

Ya kamata a duba samfuran da aka ƙera don ganin yadda kauri bango yake, riƙe rubutu, bayyananne, fashewa, raguwa da kwanciyar hankali.

Maki na Cikin Gida, Waje da na Musamman PVC

Bai kamata a bayyana daidaitaccen PVC ta atomatik a matsayin mai juriya ga waje, mai hana kumburi, mai hana wuta ko kuma wanda aka amince da shi don aikace-aikacen da aka tsara ba.

Frosted PVC vs. PET , PP da Acrylic

Tsaron Yankan, Naɗewa da Ƙirƙira

• Ana iya yanke siririn PVC ta amfani da wuƙaƙe masu dacewa, guillotines, yanke da kayan aikin yankewa.

• Ana iya yanke sassan samarwa, a yi musu naushi, a haƙa rami ko kuma a yi musu hanya ta hanyar injiniya.

• Kayan aiki masu kaifi suna taimakawa wajen rage kumburi, farar fata da kuma fashewa ba tare da tsari ba.

• Ya kamata a gwada zurfin maki, alkiblar hatsi da zafin naɗi kafin a samar da akwatin naɗi.

• Hanyoyin haɗa mita mai yawa, zafi da ultrasonic suna buƙatar gwaje-gwaje na musamman don aikace-aikace.

• Haɗin manne yana buƙatar manne mai dacewa da PVC da gwaji don haske, ƙarfi da ƙaura.

• Ya kamata a yi amfani da isasshen iska yayin dumama, samarwa da kuma aikin walda.

• Bai kamata a yanke ko a sassaka PVC da kayan aikin laser na yau da kullun ba saboda ana iya samar da iskar gas ko ƙura mai haɗari.

Gwaje-gwajen Kula da Inganci da Aka Ba da Shawara

• PVC Tabbatar da resin da ƙari.

• Juriyar kauri da kauri.

• Faɗin birgima, girman takardar abu da kuma haƙurin diagonal.

• Faɗi, lanƙwasa, ingancin lanƙwasa da yanayin gefen.

• Daidaiton rubutu mai sanyi.

• Shaƙi da kuma ƙaiƙayi a saman.

• Watsa haske, hazo da haske inda aka ƙayyade.

• Daidaiton launi da kuma daidaiton launi tsakanin rukuni zuwa rukuni.

• Baƙaƙen tabo, gels, wuraren lu'ulu'u, layukan kwarara da ƙazanta.

• Ƙarfin tauri, tsawaitawa da kuma aikin tasiri.

• Buga mannewa da juriyar abrasion.

• Gwaje-gwajen yankewa, ƙima da kuma naɗe-farin jiki.

• Gwaje-gwajen thermoforming da riƙe rubutu.

• Daidaita manne, walda da lamination.

• Gwajin antistatic, UV ko harshen wuta don takamaiman maki.

• Aikin mannewa da cire fim mai kariya.

• Duba kaya, fakiti da kuma duba kwantena.

Zaɓuɓɓukan da aka yi wa ado na musamman PVC takardar

• Kauri daga 0.06mm zuwa 2mm.

• Nau'in birgima mai girma, na'urorin yankewa, na'urorin lebur takardar abu da kuma na'urorin yankewa.

• Girman da aka ƙayyade kuma aka keɓance na takardar abu .

• Launuka masu haske, shuɗi-shuɗi masu haske, masu haske da launuka marasa haske.

• Fuskokin da aka yi da sanyi a gefe ɗaya da kuma gefe biyu.

• Haɗin matte/matte, matte/mai sheƙi da kuma matte/matte.

• Launuka masu kyau, matsakaici, kauri da kuma launin lemu.

• Bugawa, naɗewa-akwatin da kuma matakan thermoforming.

• Tsarin da ke da tsayayyen UV, antistatic da kuma hana harshen wuta.

• Fim ɗin kariya na gefe ɗaya ko na gefe biyu.

• A3, A4, A5, Harafi da girman murfin ɗaurewa na musamman.

• Lakabi na musamman, kwalaye, pallets da alamun jigilar kaya.

Bayanin da ake buƙata don Ƙimar Kuɗi

• Kauri da haƙuri da ake buƙata.

• Faɗin birgima ko girman takardar abu .

• Naɗewa, takardar abu ko tsarin samar da kayan yanka.

• Taurin kai ko sassauci da ake buƙata.

• Bayyananne, mai launi ko kuma wanda ba a iya gani.

• Kammalawa mai kauri ɗaya ko biyu a gefe ɗaya.

• Kyakkyawan tsari, matsakaici, mai kauri ko kuma na musamman.

• Ana buƙatar watsa haske, hazo ko sheƙi.

• Kayan aikin bugawa, tawada da hanyar warkarwa.

• Tsarin yankewa, ƙima, naɗewa ko tsarin thermoforming.

• Aikace-aikacen cikin gida ko waje.

• Bukatun UV, antistatic, harshen wuta ko ƙarancin zafin jiki.

• Bukatar fim mai kariya.

• Rahoton gwaji da ake buƙata da kasuwar da za a je.

• Adadin farko da kuma ƙimar buƙata ta shekara-shekara.

• Marufi, tashar jiragen ruwa da ake zuwa da kuma ranar da ake buƙatar isarwa.

Aika Bukatunku na Frosted PVC

Takardun Bayanan Fasaha da Rahotannin Gwaji

Rahoton gwajin PVC share {[ takardar abu takardar abu PVC takardar abu da ke akwai an ajiye su a ƙasa don yin tunani.

Kafin amfani da kowace takarda don siye, ƙira ko dalilai na ƙa'ida, tabbatar da cewa ya shafi ainihin tsarin HS-019, kauri, saman, launi, wurin samarwa da kuma rukunin masana'anta.

   Sauke Takardar Bayanai Fayil na PVC mai haske

   Sauke Rahoton Gwaji PVC takardar

Takaddun Shaida da Takardun Bin Dokoki

Takardun da ake da su na iya haɗawa da bayanan fasaha takardar abu s, bayanan aminci takardar abu s, rahotannin kadarorin jiki, rahotannin abubuwan da aka takaita da kuma takaddun shaidar kula da inganci.

Ya kamata a bayyana SGS bisa ga ainihin gwajin da aka kammala maimakon a gabatar da shi a matsayin takardar shaidar samfuri ta duniya baki ɗaya.

Ya kamata a duba mai takardar shaidar, wurin da aka ƙera, bugu na yau da kullun, iyakokin takaddun shaida da lokacin ingancin kowace takardar shaidar ISO kafin a buga su.

ISO 9001 ma'aunin tsarin kula da inganci ne kuma baya kafa ka'idojin da suka shafi abinci, magani, hana gobara ko muhalli ga PVC takardar abu .

Shiryawa da Isarwa

Samfurin marufi: Ana iya kare samfurin A4 takardar abu da ƙananan samfuran da aka yanke da jakunkunan PE da kwalaye masu tauri.

Marufin birgima: Ana iya naɗe birgima masu siriri PVC da fim ɗin PE, takarda kraft, kayan hana ruwa shiga da kuma kariyar gefen.

Marufin takardar: Fakitin da aka ambata takardar abu suna da nauyin kimanin kilogiram 30, ko kuma an keɓance su bisa ga girma da buƙatun sarrafawa.

Kariyar saman: Ana iya tattauna naɗewar PE, kayan da ke tsakanin layuka ko fim ɗin kariya don samfuran da ke buƙatar kariyar karce.

Marufin fale-falen: Nauyin da aka ɗauka a fale-falen yana da kimanin kilogiram 500-2000 dangane da girman takardar abu da iyakokin sarrafawa.

Lodawa a cikin kwantena: Lodawa ta hanyar amfani da na'urar aunawa tana da nauyin tan 20, wanda ya danganta da girman samfurin, tsarin pallet da kuma ƙa'idodin doka na nauyin da aka ƙayyade.

Lokacin samarwa: Kayayyakin yau da kullun suna buƙatar kimanin kwanaki 7-15 bayan ƙayyadewa, samfuri, tattarawa da tabbatar da biyan kuɗi.

Me Yasa Zabi HSQY A Matsayin Mai Kaya Da Kaya Da Aka Yi Daskarewa PVC takardar ?

• Kauri daga 0.06mm zuwa 2mm.

• Nau'i, takardar abu s da kuma tsarin samar da kayayyaki masu yankewa zuwa girman da aka ƙayyade.

• Fuskokin da aka yi da sanyi a gefe ɗaya da kuma gefe biyu.

• Launuka masu kyau, masu kauri, matte, velvet da kuma embossed.

• Launuka masu haske, masu launin shuɗi, masu haske da kuma marasa haske.

• Bugawa, naɗewa-akwatin, murfin ɗaurewa da kuma samar da maki.

• Samfura don kimantawa ta gani, bugawa da naɗewa.

• Rage girman da aka saba yi, takardar abu da kuma tallafin girman da aka yanke.

• Zaɓuɓɓukan shirya fim ɗin kariya da fitarwa.

• Dubawa bisa ga ƙa'idodin da aka amince da su.

Kafin a samar da kayayyaki da yawa, HSQY ya ba da shawarar a gwada kayan da aka zaɓa ta amfani da firintar abokin ciniki ta ainihi, tawada, kayan aikin yankewa, tsarin naɗewa, injin thermoforming da ƙirar samfurin da aka gama.

Tuntuɓi HSQY don Samfura da Farashi

Tambayoyin da Ake Yawan Yi Game da Frosted PVC takardar s

Menene alamar haske mai launin PVC mai sanyi takardar abu ?

Fim ne mai haske ko haske PVC ko takardar abu mai siffar rubutu wanda ke rage sheƙi kuma yana ɓoye wasu bayanai a bayan kayan.

Menene ake amfani da HS-019 frosted PVC takardar abu ?

Ana amfani da shi musamman don akwatunan naɗewa, bugawa, murfin littattafai, kayan rubutu, tagogi na marufi, nunin faifai da kuma rufin kariya.

Shin frosted PVC iri ɗaya ne da matte PVC ?

Sau da yawa ana amfani da kalmomin don samfuran makamantan su, amma frosted PVC na iya samun ƙarin yaɗuwar gani, yayin da matte PVC na iya bayyana saman da ba shi da sheƙi sosai.

Menene bambanci tsakanin matte da ƙurar PVC ?

An zaɓi Matte PVC don kammala gani mai ƙarancin haske. Fuskar da ke da ƙura mai haske na iya rage toshewa tsakanin takardar abu s yayin da take kiyaye haske mai yawa.

Shin akwai mai frosted gefe ɗaya PVC ?

Eh. Ɗaya daga cikin ɓangarorin na iya samun saman da ya yi sanyi ko matte yayin da ɓangaren baya ya kasance mai laushi ko santsi.

Shin akwai mai frosted gefe biyu PVC ?

Eh. Ana iya samar da laushi mai laushi ko mai santsi a ɓangarorin biyu.

Wadanne kauri ake samu?

HSQY ya lissafa jimlar kewayon kusan 0.06-2mm, tare da kimanin 0.10-2mm shine kewayon takardar abu da aka saba amfani da shi.

Shin ana samun siririn frosted PVC a cikin biredi?

Eh. Ana iya samar da siraran ma'auni masu dacewa a matsayin manyan birgima ko birgima masu yankewa bisa ga faɗin da girman birgima da ake buƙata.

Wadanne girman takardar abu ake da su?

Girman da aka saba amfani da su sun haɗa da 700 × 1000mm, 750 × 1050mm, 915 × 1830mm da 1220 × 2440mm, tare da girman da aka keɓance.

Za a iya buga frosted PVC ?

Eh. Maki masu dacewa zasu iya tallafawa UV offset, allo, UV inkjet da zaɓaɓɓun bugu na dijital bayan gwajin tawada da mannewa.

Wane gefen gefe ɗaya mai sanyi PVC ya kamata a buga?

Gefen da ya dace ya dogara ne da yadda ake ganin tasirin gani da tsarin tawada. Ya kamata a gwada gefunan da suka yi matte da waɗanda aka goge daban.

Za a iya amfani da frosted PVC don akwatunan naɗewa?

Eh. Ana iya yanke maki masu tsauri, a naɗe su, a manne su, a haɗa su a cikin akwatunan marufi masu haske.

Shin frosted PVC yana yin fari idan an naɗe shi?

Farin da ke naɗewa zai iya faruwa idan kayan, zurfin ƙuraje, zafin jiki ko kuma hanyar naɗewa ba su dace ba. Ana ba da shawarar a gwada samfurin.

Za a iya amfani da murfin littattafai mai laushi PVC ?

Eh. Ana amfani da siririn takardar abu s don rahotanni, littattafai, littattafan rubutu, menus, kasida da murfin gabatarwa.

Za a iya keɓance murfin A3 da A4?

Eh. Za a iya tattauna A3, A4, A5, Harafi, Girman yanke na shari'a da na musamman.

Za a iya yanke frosted PVC a kan wuta?

Eh. Ana iya yanke maki masu dacewa ta amfani da kayan aiki masu kaifi, sharewa mai dacewa da kuma matsi mai sarrafawa.

Shin za a iya yin amfani da frosted PVC a yanayin zafi?

Za a iya ƙirƙirar matakin thermoforming mai dacewa zuwa fakitin blister, abubuwan da aka saka, murfin da abubuwan da aka keɓance na musamman.

Shin yanayin sanyi ya kasance bayan thermoforming?

Tsarin zai iya zama ƙasa da bayyane a wurare masu faɗi sosai, don haka ya kamata a gwada ainihin ƙirar da zurfin ƙirƙirar.

Shin frosted PVC yana ba da cikakken sirri?

A'a. Sirrin ya dogara ne da hazo, yanayin rubutu, haske, nisan kallo da kuma nisan da ke tsakanin takardar abu da abin da ke bayansa.

Shin frosted PVC wani abu ne da aka tabbatar yana hana haske?

Matte saman zai iya rage haske da ake iya gani, amma ingantaccen aikin hana haske na gani yana buƙatar gwaji mai ma'ana.

Za a iya amfani da frosted PVC a waje?

Yin amfani da shi a waje na dogon lokaci yana buƙatar tsarin UV wanda aka haɓaka kuma aka gwada don yanayi da lokacin da ake tsammani da kuma lokacin da ake fallasa shi.

Shin daidaitaccen frosted PVC yana hana harshen wuta?

Bai kamata a ɗauka cewa harshen wuta yana aiki ba. Ana buƙatar wani tsari na musamman da rahoton gwaji don tabbatar da kauri da kuma daidaiton gwajin.

Shin akwai antistatic frosted PVC ?

Ana iya kimanta ma'aunin antistatic bisa ga kewayon juriya na saman da ake buƙata, danshi da tsawon lokaci.

Za a iya yankewa PVC takardar abu ta hanyar laser?

Bai kamata a yanke ko a sassaka PVC da kayan aikin laser na yau da kullun ba saboda iskar gas da ƙura masu haɗari na iya haifarwa. Ana ba da shawarar yanke injina.

Ta yaya ya kamata a tsaftace PVC mai sanyi?

Yi amfani da kyalle mai laushi da sabulu da ruwa mai laushi. A guji shafa kushin gogewa da kuma sinadarai masu ƙarfi waɗanda za su iya lalata saman.

Shin za a iya sake yin amfani da frosted PVC ?

Ana iya sake sarrafa tarkacen samarwa na tsabta PVC a fasaha, amma ainihin sake amfani da su ya dogara ne da wuraren tattarawa, rarrabawa da sake amfani da su na gida.

Menene mafi ƙarancin adadin oda?

Matsakaicin MOQ shine kimanin kilogiram 1000. Launuka, laushi da tsari na musamman na iya buƙatar kimanin tan 3.

Ana samun samfuran?

Ana iya samun samfuran A4 takardar abu da aka riga aka yanke, ko kuma samfuran naɗewa masu iyaka don duba yanayin rubutu, bugawa, naɗewa da kuma samar da su.

Menene lokacin samar da jagora?

Tsarin samarwa na yau da kullun yana ɗaukar kimanin kwanaki 7-15 bayan an tabbatar da ƙayyadaddun bayanai, samfuri, marufi da biyan kuɗi.

Wane bayani ake buƙata don yin ƙiyasin farashi?

Samar da kauri, girma, tsarin wadata, haɗin saman, launi, aikace-aikace, hanyar sarrafawa, adadi, marufi da inda za a je.

Sami Ƙimar Da Aka Yi Wa Frosted PVC Na Musamman

Game da Ƙungiyar Roba ta HSQY

HSQY Plastic Group tana samar da frosted PVC takardar abu s, transparent PVC takardar abu s, fina-finan PVC masu bugawa, murfin ɗaurewa, PET takardar abu s, PP takardar abu s da kayan filastik na musamman ga abokan cinikin B2B na ƙasashen waje.

HSQY tana tallafawa masu sauya marufi, firintoci, masana'antun akwatunan naɗewa, masana'antun kayan rubutu, masu samar da murfin littattafai, masana'antun nuni, masu shigo da kaya da masu rarrabawa tare da gwajin samfura, samarwa na musamman, dubawa da kuma shirya kayan fitarwa.

Nemi faɗar farashin da Samfura