HSQY PVC /PE Film thermoforme laminée

PVC /PE Laminated Thermoforming Film

HSQY PVC /PE Laminated Thermoforming Film ye pake gɛlɛn ye min bɛ kɛ ni fɛn caman ye, min bɛ fɛn dɔ fara ɲɔgɔn kan min bɛ se ka kɛ thermoformable PVC sigicogo ye ni polietilɛni datugulan ye. A dabɔra furakisɛw foroko kɔnɔ, furakɛli hakɛ kelen foroko, furakɛli foroko sugandilenw ani dumuni foroko kɛcogo ɲumanw.

PVC layini gɛlɛn bɛ dimensions sabatili di, masin fanga ani thermoforming baarakɛcogo, ka sɔrɔ PE layɛrɛ bɛ funteni-datugu ɲɔgɔn sɔrɔyɔrɔ di, ka dɔ fara a kan ka sɛgɛsɛgɛli kɛ ani ka ji kɛlɛ.

PVC /PE laminati bɛ se ka baara kɛ ni thermoform-fill-seal minɛnw ye minnu bɛ bɛn ɲɔgɔn ma walasa ka dingɛ kelen-kelenw dilan, ka fɛn dilannen fa ani ka pake sirilen dɔ dilan. Fɛn minnu bɛ se ka bɔ, olu bɛ se ka jateminɛ ni dabɔli nɔgɔn ka kan ka kɛ, ka sɔrɔ sigilan barikamaw bɛ se ka sugandi baara kama minnu bɛ pakew dafalenba de wajibiya.

HSQY fana bɛ laminiw dilan minnu ka barika ka bon, i n’a fɔ PVC /EVOH/PE ani PVC / PVDC /PE baarakɛcogo minnu bɛ oksizɛni walima ji jiginni dɔgɔya ka tɛmɛ PVC /PE sariyalen kan.

Fɛn dilannenw ka ɲɛfɔliba: PVC /PE Laminate | Termoforming (Tɛrmoforming) | Layer PE min bɛ se ka datugu ni funteni ye | Suppositoire ka foroko | Unit-Dose ka foroko | Sugandili minnu bɛ se ka peel | Dumunifɛnw foroko | 0,1–1,5 mm Published Product-Denbaya hakɛ | A bonya bɛ se ka se Approx. 840 mm | Kulɛriw ladamulenw

Demand PVC /PE misaliw ani sɔngɔ caman

PVC /PE Laminated Film Wideyo

PVC /PE Laminated Film Ɲɛfɔliw

Fɛn minnu bɛ duguma, olu bɛ HSQY PVC lamini furaw denbaya min bɔra sisan, olu lajɛlen ye. PVC janya tigitigi, PE janya, jateminɛ bɛɛ lajɛlen, a bonya, a kulɛri, a kuru hakɛ, a sigicogo ani a barika baarakɛcogo ka kan ka dafa ka ɲɛsin sɛnɛko ɲɛfɔli sugandilen ma.

Jatebla sugandili : PVC /PE, PVC /EVOH/PE ani PVC / PVDC /PE bɛ sigicogo, sigicogo ani barika baarakɛcogo faralen ɲɔgɔn kan cogoya wɛrɛw di. Aw bɛ sigicogo wajibiyalen fɔ ka kɛɲɛ ni fɛn dilannen ye, a maracogo, a dilanni kɛcogo ani a sigicogo.

Demand Current PVC /PE Fɛɛrɛko ɲɛfɔli

Material Data Sheet min bɛ sɔrɔ

Filen min bɛ se ka telesarse, o bɛ mara jukɔrɔ walasa ka kunnafoni sɔrɔ. Walasa ka PVC /PE filimu lamininen setigiya sɔrɔ, sannikɛla ŋanaw ka kan ka PVC /PE-kɛrɛnkɛrɛnnenw ka fɛɛrɛbɔ kunnafoniw ɲini sisan sɛbɛnfura min bɛ kɛ , layɛrɛ jɔli, sigilan kunnafoniw ani barika kunnafoniw minnu bɛ baara kɛ.

PET Kunnafoni-sɛbɛn.pdf

PVC /PE Filimu lamininen ye mun ye?

PVC /PE laminated film ye thermoforming material ye min bɛ kɛ ni polyvinyl chloride sɔgɔlen ye min lamininen don ni poliethylene layɛrɛ ye.

PVC layini bɛ jɔcogo farikolo ni a dilanni cogoyaw di, ka sɔrɔ PE layini bɛ sigicogo baarakɛcogo di ani ka ɲɔgɔn sɔrɔyɔrɔ wɛrɛ di baarakɛcogo ma, PE nafaw ka fisa yɔrɔ minnu na.

A ka c’a la, o fɛn bɛ dilan kurukuruw kɔnɔ ka ɲɛsin thermoform-fill-seal systems ma minnu bɛ kɛ ka suppository cavities dilan, furakɛli unit-dose pakew ani pake wɛrɛw dilannenw.

PVC /PE Film bɛ baara kɛ cogo min na furakɛli foroko kɔnɔ

PVC Layɛrɛ min bɛ se ka sɛnɛ ni funteni ye

PVC gɛlɛn bɛ sumaya ka kɛ pakew kɔnɔna ɲɛfɔlenw ye. PVC janya ɲuman bɛ bɔ kɔnɔna juguya la, a bonya la, a layini teliya la ani pake dafalen ka masinko wajibiyalenw na.

PE Layer min bɛ se ka datugu ni funteni ye

Poliyetilɛni layini bɛ funteni-datugu baara dɛmɛ, wa a bɛ se ka dilan walasa ka da wuli min bɛ se ka bɔ walima ka da tugucogo barikama ka kɛɲɛ ni a foroko dilanni ye.

Fɛn dilannenw ka ɲɔgɔnye ani u bɛnkan

Ni furakisɛw, fura jilamaw, furaji tilancɛw walima fura minnu bɛ tali kɛ furakɛli la, lamini dafalen ka kan ka jateminɛ ni furaw bɛ bɛn ɲɔgɔn ma, ni u datugucogo bɛ se ka kɛ ani ni u foroko dilanni wajibiyalenw ye minnu bɛ sirataama sani a ka se ka jago kɛ.

PVC /PE Laminated Film ka fɛn kolomaw

Thermoformability ɲuman

Rigid PVC bɛ foroko baara ɲuman di dingɛ ɲɛfɔlenw ma ani pakew jateminɛcogo ni funteni ni foroko cogoyaw bɛ bɛn ka ɲɛ ni fɛnw janya ye.

Funteni-Sɔgɔli baarakɛcogo

PE sanfɛla bɛ se ka sigili dafalen di ni a farala ɲɔgɔn kan ni ɲɔgɔndan yɔrɔ bɛnnen ye ani sigili funteni, tansiyɔn ani sigi waati min bɛ kɔrɔsi.

Da wulicogo min bɛ se ka bɔ

PVC /PE jɔcogo sugandilenw bɛ se ka dilan ka kɛ foroko da wulilen ye, o b’a to u nafa ka bon furakisɛw ni fura tata hakɛ kelen-kelen wɛrɛw la, da wulicogo nɔgɔman nafa ka bon yɔrɔ minnu na.

Jiko kunbɛnni

PE layɛrɛ bɛ kɛ sababu ye ka jisuma kunbɛn. Fɛn minnu bɛ ni jiko-sɛgɛsɛgɛli wajibiyalenw ɲɛfɔlen don, sannikɛlaw ka kan ka WVTR kunnafoniw sumanlenw ɲini laminati tigitigi kama.

Masina fanga

PVC layini gɛlɛn bɛ jɔli dɛmɛ di a dilanni, a fani, a datuguli, a tigɛcogo, a pakeli ani a tali waati.

Barrières Structures (Barikɛminɛnw) minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye

Fɛn minnu bɛ oksizɛni walima ji lakanani caman wajibiya, PVC /EVOH/PE walima PVC / PVDC /PE jɔcogo bɛ se ka jateminɛ sanni ka kɛ PVC /PE sariyalen nɔ na.

PVC /PE Laminated Film Baarakɛcogo

Supositɛriw ka foroko

PVC /PE bɛ kɛ ka caya ka ɲɛsin fɛnɲɛnamafagalanw foroko ma minnu dilannen don ni funteni ye, yɔrɔ min na foroko kɛcogo, funteni datugucogo ani ɲɛgɛn da wulicogo ka kan ka baara kɛ ɲɔgɔn fɛ pakew jɔcogo kelen kɔnɔ.

Furakɛcogo Unit-Dose Packaging

PVC /PE laminati bɛ se ka jateminɛ kɛ furajilama walima jilama tilancɛ dafalenw na minnu bɛ dilan ni thermoform-fill-seal masinw ye.

OTC ani Kɛnɛyako Pakew

Jatebɔ sugandilenw bɛ se ka kɛ kɛnɛyako ni furaw dilanni na minnu tɛ sɔrɔ dɔgɔtɔrɔso la, u kɛlen kɔ ka fɛn dilannenw bɛn ɲɔgɔn ma, barika ɲininiw ani taayɔrɔ-sɔgɔli sɛbɛnw.

Dumunifɛnw foroko sugandilenw

PVC /PE furakɛlicogo bɛnnenw fana bɛ se ka jateminɛ sogo, kɔnɔ, jɛgɛ, foromazi, pasta ani dumunikɛminɛn wɛrɛw la minnu dilannen don ni funteni ye, ni dumunifɛnw ni ɲɔgɔn cɛ wajibiyalenw dafara ka ɲɛsin sɛnɛcogo tigitigi ma.

Sɛgɛsɛgɛli kɛ HSQY PVC lamini filimu hakɛ ka ɲɛsin PVC /PE sariyalen ma ani laminati jɔli barikalan sanfɛtaw ma.

PVC /PE Laminated Film Application Jaw

PVC /PE ni PVC /EVOH/PE ni PVC / PVDC /PE

Peelable PVC /PE Filimu min bɛ kɛ ka supositɛri pakew kɛ

Peelable PVC /PE structures nafa ka bon kɛrɛnkɛrɛnnenya la suppository pakew dilanni na bawo PE layɛrɛ bɛ se ka labɛn walasa ka pake dafalen di fa, mara ani tilali waati la ka sɔrɔ ka sira di da wulicogo kɔrɔsilen ma baarakɛla fɛ.

Peel fanga ka kan ka jateminɛ ni PVC /PE jɔcogo tigitigi ye, a sigicogo funteni, a degun, a sigi waati ani a dilanni masin. Ni a ɲɛkisɛ fanga dɔgɔyara kojugu, o bɛ se ka pake dafalen tiɲɛ, ka sɔrɔ a ɲɛkisɛ fanga ka ca kojugu, o bɛ se ka da wuli gɛlɛya.

PVC /PE Filimu bɛ baara kɛ cogo min na Formulaire-Fill-Seal Line kan

Film Lafiɲɛbɔ

PVC /PE rollstock bɛ sigi pakew dilanni masin kan ka jogin ka kɛɲɛ ni a ɲɛsincogo fɔlen ye.

Preheating ani Forming (sɔgɔli ɲɛfɛ).

Filimu bɛ sumaya ka dilan ka kɛ kɔnɔna jateminɛ wajibiyalen ye ni thermoforming system ni mold ye.

Fɛn dilannenw Facogo

Supositɛri, jilama, jilama tilancɛ walima fɛn wɛrɛ min dagalen don, o bɛ fa dingɛ dilannen kɔnɔ, a dilanni cogoya wajibiyalenw na.

Nɛnɛ bɛ kɛ yɔrɔ min na

Fɛn minnu bɛ kɛ i n’a fɔ furakisɛw, olu bɛ se ka kɛ sababu ye ka nɛnɛ walima ka u gɛlɛya ni kɔlɔsili ye sani u ka datugu laban na ani ka u tigɛ.

Funteni Dadonni ni Tigɛcogo

A foroko bɛ datugu cogo la min bɛ kɔlɔsi, o kɔfɛ, a bɛ tigɛ walima ka a faranfasi ka kɛɲɛ ni a tata hakɛ kelen ye min wajibiyalen don.

PVC /PE Laminated Film sugandicogo

Fɛn min bɛ kɛ foroko kɔnɔ: Aw bɛ furakisɛ, dajilama, jilama tilancɛ, furakɛlifɛn, dumunifɛn walima a kɛcogo wɛrɛ fɔ.

Janya bɛɛ lajɛlen : Aw bɛ lamini janya ni muɲuli wajibiyalen di ka kɛɲɛ ni kɔnɔna juguya ni a gɛlɛya ye.

PVC janya: Aw bɛ sigida lamini min ka kan ka kɛ walasa ka foroko ni pake dafalen fanga dafa, o dafa.

PE janya : Aw bɛ sigilan wajibiyalen ɲɛfɔ ka kɛɲɛ ni sigilan fanga ye, a bɔlicogo ani a magali cogoya.

Roll width: Aw bɛ web bonya tigitigi ni slitting tolerance di min wajibiyalen don pakew dilanni masin fɛ.

Core ni roll hakɛw: Aw bɛ core diameter di, ka roll kɛnɛma cɛmancɛ hakɛ caya ani roll girinya min ka di.

Jateminɛ kɛcogo : Aw bɛ dingɛ hakɛ, dingɛ juguya, mɔbili ja ani fɛn dilanni-sira kunnafoniw di.

Sigili wajibiyalen : Aw bɛ sigili kɛcogo ɲɛfɔ min bɛ se ka bɔ walima min barika ka bon ani da wuli fanga wajibiyalen yɔrɔ min na a bɛ se ka kɛ.

Barika laɲini : Aw bɛ OTR ni WVTR wajibiyalenw di ni barika baara bɛ nɔ bila fɛn dilannenw sabatili la walima u marali waati la.

Fali cogoyaw: Aw bɛ fɛn dilannenw facogo funteni ni kemikɛli walima tulu ni ɲɔgɔn cɛ wajibiyalenw bɛɛ di.

Sugu min bɛ taa yɔrɔ la: Jamana walima mara min bɛna kɛ ni foroko dafalenw ye, o fɔ walasa sɛbɛnw ka se ka lajɛ minnu bɛ tali kɛ o la.

Baro kɛ Aw ka PVC /PE Pakew wajibiyalenw kan

PVC /PE Film tiɲɛni cogo Sani ka komandi caman kɛ

Kɔrɔbɔli min bɛ kɛ ni thermoforming ye

Aw bɛ o fɛnw kɔrɔbɔ fɛn dilanni masin yɛrɛ kan ani a dilannikɛlan kan. Aw bɛ kɔnɔna ɲɛfɔli, nkɔni janya, a dɔgɔyali, a hakɛ sabatili ani a tigɛcogo ɲuman jateminɛ.

Seal-Window Kɔrɔbɔli

Aw bɛ sigicogo jateminɛ funteni, degun ani sigi waati bɛnnenw na walasa ka sɛnɛfɛnw dilanni finɛtiri sabatilen sigi sen kan.

Peel-Strength Sɛgɛsɛgɛli

Ni pakew dabɔlen don ni u ɲɛ ye, aw bɛ da wuli fanga ni u kɛcogo jateminɛ u dilanni, u marali kɔfɛ ani u kɔrɔla cogo laɲininenw na.

Barrière Test (Barikɛri sɛgɛsɛgɛli).

Ni ji walima oksizɛni tali bɛ nɔ bila fɛn dilannenw sabatili la, aw bɛ WVTR ni OTR kunnafoniw ɲini walima k’u sɛgɛsɛgɛ lamini jɔcogo tigitigi kan sɛgɛsɛgɛli cogoyaw la minnu bɛ bɛn o ma.

Fɛn dilannenw ka bɛnkan sɛgɛsɛgɛli

Furakɛminɛnw ta fan fɛ, aw bɛ laminati sɛgɛsɛgɛ ni a dilanni ni a facogo yɛrɛ ye. Aw bɛ sigilan dafalen jateminɛ, a cogoya, a bɛ se ka ɲɔgɔn sɔrɔ ani a maracogo sabatili ka kɛɲɛ ni seko ni dɔnko porogaramu ye min bɛ sirataama.

PVC /PE sɛbɛn ni rollo pakew ɲɛfɔli

Misaliw foroko : Misali sɛbɛnfura min bɛ kɛ s bɛ se ka lakana bɔrɔw ni kartɔn bɛnnenw kɔnɔ ka kɛɲɛ ni misali labɛncogo ye min bɛ sen na sisan.

Sɛbɛnw foroko : Kunnafoni kɔrɔ minnu bɔra kɛnɛ kan, olu bɛ kilo 30 ɲɔgɔn bɔ bɔrɔ kelen kɔnɔ, fɛn gɛlɛn dɔw sɛbɛnfura min bɛ kɛ . Sisan pakew ka kan ka dafa ka kɛɲɛ ni a bonya ni a bonya ye.

Rollo Packing: Aw bɛ rollo bonya, a kɔnɔna hakɛ, a kɔnɔna girinya, a kɛnɛma cɛmancɛ, a siricogo ani a sirili lakanani dafa ka kɛɲɛ ni a dilanni ɲɛfɔli ye min dabɔra.

Palɛtiw foroko : Kunnafoni kɔrɔ minnu bɔra kɛnɛ kan, olu bɛ kilo 500–2000 ɲɔgɔn bɔ plywood palɛti kelen na. Palɛti doni lakika bɛ bɔ rollo labɛncogo la, a cicogo girinya dan ani a taayɔrɔ wajibiyalenw.

Konteyna doni: Kunnafoni kɔrɔ minnu bɔra, olu bɛ tɔni 20 ɲɔgɔn jira ci dɔw la. Doni laban ka kan ka jate ka bɔ kurukuru hakɛw la minnu dagalen don, palɛtiw labɛncogo, minɛn suguya ani sariya siratigɛ la girinya dan minnu bɛ sirataama.

Fɛn dilanni waatibolodacogo: Kunnafoni kɔrɔ minnu bɔra kɛnɛ kan, olu bɛ tali kɛ baarakɛdon 10–14 ɲɔgɔn na. Sisan, waati min bɛ kɛ ka ɲɛsin fɛnw ma, o bɛ bɔ fɛnw jɔcogo la, u hakɛ, u ladamuni, misali sɔnni ani izini waati bolodacogo.

Lasecogo sariyaw: Sugandili minnu bɔra kɛnɛ kan, olu ye EXW, FOB, CNF ani DDU ye. Jago sariya minnu bɛ sirataama, olu dafa ni sisan quotation ye.

Aw ye Packing ani Shipping Details ɲini

Ɲininkali minnu bɛ kɛ tuma caman na PVC /PE Laminated Film kan

PVC /PE filimu lamininen ye mun ye?

PVC /PE laminated film bɛ PVC layini gɛlɛn min bɛ se ka sɛnɛ ni funteni ye, o ni poliyetilɛni datugulan dɔ fara ɲɔgɔn kan. A ka ca a la, a bɛ kɛ ka furakisɛw, fura tata hakɛ kelen ani furakisɛ dilannen wɛrɛw kɛ.

PVC /PE filimu bɛ kɛ mun na?

Baarakɛcogo minnu bɛ kɛ tuma caman na, olu ye furakisɛw foroko ye, furakɛli jilama walima jilama tilancɛ hakɛ kelen, kɛnɛyako foroko sugandilenw ani dumuni foroko minnu dilannen don ni funteni ye, olu minnu bɛ se ka kɛ.

Mun na PE bɛ lamini PVC kan ?

PE layɛrɛ bɛ funteni-sigi baarakɛcogo di, ka fɛn caman sɛgɛsɛgɛ ani ka ji kunbɛn. Ka kɛɲɛ ni a furakɛcogo ye, a bɛ se ka kɛ fana ko a bɛ se ka kɛ sababu ye ka ɲɛgɛn da wulicogo kɔlɔsi.

Yala PVC /PE filimu bɛ se ka kɛ thermoformé ye wa?

Awɔ. PVC /PE bɛnnen don thermoforming ni form-fill-seal sigidaw ma minnu bɛ bɛn ɲɔgɔn ma. So funteni ni a dilanni paramɛtiriw ka kan ka ɲɛ ka kɛɲɛ ni a jɔcogo tigitigi ni a kɔnɔna dilancogo ye.

Yala PVC /PE bɛnnen don furakisɛw foroko ma wa?

Awɔ. PVC /PE bɛ kɛ ka caya ka ɲɛsin thermoformed suppository packaging ma yɔrɔ minnu na formability, sealing ani peel-open baarakɛcogo de wajibiyalen don.

Yala PVC /PE bɛ se ka fura jilama walima jilama tilancɛw pake wa?

PVC /PE jɔcogo sugandilenw bɛ se ka jateminɛ furakɛli hakɛ kelen-kelenw na minnu kɔnɔ, jilama walima jilama tilancɛ bɛ sɔrɔ. Furakɛcogo bɛnkan, sigilan dafalen ani mara sabatili ka kan ka tiɲɛ ni furakɛlicogo yɛrɛ ye.

Fɛnɲɛnɛma jumɛnw bɛ sɔrɔ?

Sisan HSQY PVC lamini fura denbaya bɛ milimɛtɛrɛ 0,1–1,5 ɲɔgɔn bɔ. PVC /PE bɛɛ lajɛlen janya tigitigi ani layini kelen-kelen jɔli ka kan ka dafa porozɛ kelen-kelen bɛɛ kama.

Bonya jumɛn bɛ sɔrɔ?

HSQY ka sisan PVC laminati hakɛ bɛ bonya bɔ fo ka se milimɛtɛrɛ 840 ɲɔgɔn ma. Aw bɛ web bonya ni a tigɛcogo muɲuni wajibiyalenw dafa ka kɛɲɛ ni pakew dilanni masin ye.

Kulɛri jumɛnw bɛ sɔrɔ?

HSQY PVC lamini sugandili minnu bɔra kɛnɛ kan, olu ye jɛlen, nɛrɛ ani fin ye, ni kulɛriw ye minnu bɛ sɔrɔ ka kɛɲɛ ni u dilanni ni komandi hakɛ ye.

Yala PVC /PE filimu bɛ se ka bɔ a la wa?

Awɔ. PE furakɛcogo sugandilenw bɛ se ka da wuli min bɛ se ka bɔ. Peel fanga ka kan ka se ka kɛ ni a dilanni cogoya yɛrɛ ye ani a datugucogo.

Yala standard PVC /PE ye filimu ye min bɛ barika caman sɔrɔ wa?

Standard PVC /PE bɛ baarakɛminɛn kɛrɛnkɛrɛnnenw ka barika baarakɛcogo di, nka a man kan ka jate a yɛrɛma i n’a fɔ barikalan sanfɛla sugandilen. OTR ni WVTR hakɛ sumanlenw ɲini ni fɛn dilannenw sabatili bɛ bɔ barika baarakɛcogo la.

PVC /EVOH/PE ka kan ka sugandi tuma jumɛn?

PVC /EVOH/PE ka kan ka jateminɛ ni oksizɛni tali ka dɔgɔn kosɛbɛ ka tɛmɛ sariya PVC /PE bɛ se ka min di.

PVC / PVDC /PE ka kan ka sugandi tuma jumɛn?

PVC / PVDC /PE bɛ se ka jateminɛ ni pake in bɛ gazi walima jisuma barika baarakɛcogo ɲɛ ka taa a fɛ. PVDC sigicogo bɛnnen ka kan ka sugandi ka kɛɲɛ ni laɲini barika hakɛ ye.

Yala PVC /PE bɛ se ka kɛ dumunifɛnw foroko ye wa?

PVC /PE jɔcogo sugandilenw bɛ se ka jateminɛ dumuniw foroko kɔnɔ ni u dilanni tigitigi, u magayɔrɔ ani dumuni ni ɲɔgɔn cɛ sɛbɛnw minnu bɛ sɔrɔ, olu bɛnnen don dumuni suguya ma, funteni, ɲɔgɔn sɔrɔ waati ani taayɔrɔ sugu ma.

Koman hakɛ fitinin ye mun ye?

Sisan HSQY PVC lamini fura denbaya bɛ MOQ bɔ min bɛ kilo 1000 ɲɔgɔn bɔ. Laadalata jɔcogo, hakɛ walima kulɛriw bɛ se ka kɛ sababu ye ka fɛn dilanni dɔgɔyali danfaralenw wajibiya.

Yala ne bɛ se ka misaliw ɲini wa?

Awɔ. Baro bɛ se ka kɛ misali fɛnw kan walasa ka dilancogo fɔlɔ, sigicogo ani bɛnkan jateminɛ. A ka ɲi ka kɔrɔbɔli kɛ pakew dilanni sira laɲininen kan sani ka sɔn sigicogo kura ma.

Mun ka kan ka sɛgɛsɛgɛ sani ka komandi kɛ ka caya?

Aw bɛ thermoforming, cavity definition, dimensional stability, seal window, peel walima seal fanga, pake dafalen, OTR walima WVTR jateminɛ yɔrɔ minnu na a mago bɛ a la ani ka bɛn ni pake kɔnɔfɛn ye.

Fura sanbagaw ka kan ka sɛbɛn jumɛnw ɲini?

Aw ye PVC /PE fɛn dilannenw ɲɛfɔli ɲini sisan, layɛrɛ jɔli, sɛgɛsɛgɛli rapɔɔri minnu bɛ sirataama, jogoɲumanya sɛbɛnw ani fɛnw labatoli kunnafoniw minnu wajibiyalen don fɛn dilannen ni taayɔrɔ suguya laɲininen na.

Ne ka kan ka kunnafoni jumɛnw di walasa ka quotation sɔrɔ?

Aw bɛ laminati jɔcogo wajibiyalen di, a janya bɛɛ lajɛlen, PVC ani PE layɛrɛ wajibiyalenw, a bonya, a kɔnɔna hakɛ, a kuru hakɛ, a kulɛri, a foroko juguya, a sigicogo wajibiyalen, a pake kɔnɔfɛn, a barika laɲini, a hakɛ ani a taayɔrɔ suguya.

HSQY Plastic Group ko la

HSQY Plastic Group bɛ plastiki gɛlɛnw sɛbɛnfura min bɛ kɛ , thermoforming rollstock ani pakew laminifɛnw di pakew tigɛbagaw ma, furakɛli pakew dilannikɛlaw ma, dumuni dilannikɛlaw ma, u feerelaw ma ani diɲɛ kɔnɔ fɛnw donbagaw ma.

HSQY lamini na PVC /PE, PVC /EVOH/PE, PVC / PVDC /PE, PET/PE ani fɛn wɛrɛw bɛ yen minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye furakɛli, dumuni ani izini pakew baara kama.

Jogoɲumanya ni fɛn dilannenw sɛbɛnw

HSQY ka diɲɛ izini jiralibaw la

Aw ye sɔngɔko sɛbɛn ɲini for PVC /PE Filimu lamininen

Aw bɛ PVC /PE laminated film ɲini ka kɛ suppositories ye, furakɛli unit doses, thermoforming walima qualifié dumuni pakew kama wa? Aw ye HSQY ci aw ka fɛnw jɔcogo wajibiyalenw, u janya bɛɛ lajɛlen, u layɛrɛ wajibiyalenw, u bonya, u roll dimensions, forming depth, sealing requirements, barrier targets, order quantity and destination market.

Aw ye HSQY lajɛ walasa ka Samples ani Bulk Pricing sɔrɔ