Kunnafoni minnu bɛ sɔrɔ kiliyanw fɛ minnu ka ca kosɛbɛ, olu ye jumɛnw ye?

Kunnafoni minnu ka ca ni kiliyanw ye, olu ye 1/2 inch pvc sɛbɛn 2mm pvc sɛbɛn 4mm pvc sɛbɛn 6mm pvc sɛbɛn 3mm nɛrɛma pvc sɛbɛn nɛrɛma pvc sɛbɛn finman pvc sɛbɛn

Aw bɛ yan: So » PVC & PET Laminasi filimu

PLASTIC LAMINATION FILM MIN BƐ SƆRƆ

PVC Sheet rigide in Roll ni PE Lamination Film ye

An ka PVC lamini filimu bɛ ni vacuum dilancogo ɲuman ye ni nɔba ye ani a bɛ se ka kemikaliya kɛlɛ. A bɛ sɔrɔ laminati ye fɛn caman na i n’a fɔ: PVC /PE, PVC /EVOH/PE ani PVC /PVDC/PE ka ɲɛsin barika hakɛ caman ma, oksizɛni ni ji kɛlɛli ka bon. An bɛ se ka fɛn caman dilan minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye minnu bɛ se ka wuli ka bɔ u nɔ na ani minnu tɛ se ka UV kɛlɛ minnu bɛ kiliyanw ka magoɲɛfɛn caman dafa k’a ta dumunifɛnw foroko la ka se furakɛli foroko ma.

PVC Lamination Film ka baarakɛcogo:

Sogo kura foroko, Sogo dilannenw foroko, Kɔnɔw foroko, Jɛgɛ foroko, Foromazi foroko, Pasta foroko, Dɔgɔtɔrɔso foroko, MAP ani Vacuum foroko.

PVC Lamination Film ka fɛn ɲɛfɔlenw:

Fɛn min bɛ kɛ: PVC , PVC /PE, PVC /EVOH/PE, PVC /PVDC/PE
A bonya: 0,1-1,5mm
A bonya hakɛ cayalenba: 840mm
Kulɛriw: A jɛlen don, a ɲɛ ye nɛrɛ ye ani a ka fin. (Kulɛri minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ sɔrɔ ni ɲinini kɛra).

PET Filimu gɛlɛn ani PET Laminatiw

An ka PET Rigid Film ani PET Laminates bɛ ni fɛn ɲumanw ye minnu bɛ se ka segin ka kɛ fɛn wɛrɛw ye, ka fara vacuum dilan sekobaw kan ani nɔba ni kemikaliw kɛlɛli. A bɛ sɔrɔ laminati ye fɛn caman na i n’a fɔ: PET /PE, PET /EVOH/PE ani PET /PVDC/PE ka ɲɛsin barika hakɛ caman ma, oksizɛni ni ji kɛlɛli ka bon. An ka PET filimu fana bɛ funteni dɔgɔyali dɔgɔya, Tensile Strength High, Stable quality, environment friendly structures ni High brightness ani Transparency for excellent shelf appeal.

Baarakɛcogo:

Sogo kura foroko, Sogo dilannenw foroko, Kɔnɔw foroko, Jɛgɛ foroko, Foromazi foroko, Pasta foroko, Dɔgɔtɔrɔso foroko, MAP ani Vacuum foroko.

Kɛrɛnkɛrɛnnenya la:

Fɛn min bɛ kɛ ka fɛnw dilan: PET , PET /PE, PET /EVOH/PE, PET /PVDC/PE
A bonya: 0,1-1,5mm
A bonya hakɛ cayalenba: 840mm
Kulɛriw: A jɛlen don, a nɛrɛmuguma ani a finman. (Kulɛri minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ sɔrɔ ni ɲinini kɛra).

Poliporopilini (PP) Film gɛlɛn ani PP Laminatiw.

An ka Poliporopilini Films bɛ fura ɲuman di vacuum ni thermoformed pakew ma. An ka PP Film bɛ se ka lamini walasa ka barika bonya kosɛbɛ ani ka dɔ fara oksizɛni ni ji kɛlɛli kan. PP jɔcogo ni kulɛriw bɛ sɔrɔ ni ɲinini kɛra.

Baarakɛcogo:

Sogo kura foroko, Sogo dilannenw foroko, Kɔnɔw foroko, Jɛgɛ foroko, Foromazi foroko, Pasta foroko, Dɔgɔtɔrɔso foroko, MAP ani Vacuum foroko.

Kɛrɛnkɛrɛnnenya la:

Fɛn min bɛ kɛ: PP, PP/PE, PP/EVOH/PE, PP/PVDC/PE
A bonya: 0,2-1,5mm
A bonya hakɛ cayalenba: 840mm
Kulɛriw: A jɛlen don, a nɛrɛmuguma ani a finman. (Kulɛri minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ sɔrɔ ni ɲinini kɛra).

Polisitirili min bɛ se ka nɔba bila (HI PS ) Filimu gɛlɛn ani HI PS Laminasi filimu

An ka Polisitirili Films minnu bɛ nɔba bila, olu bɛ fura ɲuman di vacuum ni thermoformed packaging ma. An ka PP Film bɛ se ka lamini walasa ka barika bonya ani ka oksizɛni caya, ji funteni kunbɛnni. PP jɔcogo ni kulɛriw bɛ sɔrɔ ni ɲinini kɛra. A bɛ kɛ ka caya dumuni ni minfɛn funtenimaw pakew dilanni na ani ɛntɛrinɛti fɛnw pakew kama.

Baarakɛcogo:

Dumuni ni minfɛn funtenimaw foroko, Sogo kuraw foroko, Sogo dilannenw foroko, Kɔnɔw foroko, Jɛgɛ foroko, Foromazi foroko, Pasta foroko, Dɔgɔtɔrɔso foroko, Ɛntɛrinɛti foroko, MAP ani Vacuum foroko.

Kɛrɛnkɛrɛnnenya la:

Fɛn min bɛ kɛ ka fɛnw dilan: HI PS , HI PS /PE, HI PS /EVOH/PE, HI PS /PVDC/PE
A bonya: 0,25-1,5mm
A bonya hakɛ cayalenba: 840mm
Kulɛriw: A jɛlen, Dugukolonɔn ani fin. (Kulɛri minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ sɔrɔ ni ɲinini kɛra).

PVC / PET Laminifɛnw

Ɲininkaliw

s

1.Filimu lamininen PVC ye mun ye?

PVC filimu lamininen ye PVC filimu kɛrɛnkɛrɛnnen sugu dɔ ye,an bɛ PE filimu ni PVC filimu gɛlɛn lamini ni lamini masin ye. I n’a fɔ PVC filimu gɛlɛn tɛ se ka maga dumuni na k’a ɲɛsin a ma, PE ni PVC filimu faralen ɲɔgɔn kan,a bɛ se ka dumuni sɔrɔ k’a ɲɛsin a ma.

2.Filimu lamininen PET ye mun ye?

PET filimu lamininen ye filimu kɛrɛnkɛrɛnnen sugu dɔ ye PET ,an bɛ PE filimu ni PET filimu gɛlɛn lamini ni lamini masin ye,k’a masɔrɔ PET filimu min kɛra o kɔfɛ, o tɛ se ka siri k’a ɲɛsin filimu shrink ma, n’a farala ɲɔgɔn kan ni PE filimu ye, a bɛ se ka siri ni otomatiki sirilan ye, o bɛ se ka baara waati ni baarakɛcogo ɲuman kisi kosɛbɛ.

3. PVC sɛbɛn ye mun ye?

PVC sɛbɛn gɛlɛn tɔgɔ dafalen ye Polivinyl Chloride Rigid Sheet ye. Ni a bɛ baara kɛ ni fɛnɲɛnamafagalanw ye i n’a fɔ fɛn fɔlɔw, a bɛ baara kɛ ni super high performance ye anti-oxydation, anti-strong acid ani anti-reduction la. PVC sɛbɛn gɛlɛn fana fanga ka bon ani a sabatili ka ɲi kosɛbɛ, wa a tɛ tasuma don, wa a bɛ se ka sɔgɔli kɛlɛ min bɛ sɔrɔ waati jiginni fɛ. PVC sɛbɛn gɛlɛn min bɛ sɔrɔ tuma caman na, o bɛ PVC sɛbɛn jɛlen, PVC sɛbɛn finman, PVC sɛbɛn nɛrɛma, PVC sɛbɛn jɛman, PVC pankurun jɛman, a ɲɔgɔnnaw.

4.Nafa jumɛnw bɛ PVC sɛbɛnfura la?

PVC sɛbɛnfura tɛ nafa caman sɔrɔ dɔrɔn i n’a fɔ a tɛ se ka sɔgɔ, a tɛ tasuma bɔ, a tɛ se ka fɛnw tanga, ani a tɛ se ka oksidan sɔrɔ, nka a bɛ kɛ fana k’a sababu kɛ a bɛ se ka baara kɛ kokura ani a dilanni musaka ka dɔgɔ, fo PVC sɛbɛnfura ye feereli hakɛ caman mara tuma bɛɛ plastiki sɛbɛn sugu la. O fana bɛ Bɔ a baarakɛcogo caman na ani a sɔngɔ gɛlɛnw na. PVC sɛbɛn ka baarakɛcogo caman ma dɔ fara a nafa kan, nka a bɛ ka plastiki sɛbɛn sugu dɔ minɛ sɔngɔ gɛlɛn na. Sisan, an ka jamana ka PVC sɛbɛnw ni dilancogo fɛɛrɛw ɲɛtaa sera diɲɛ kɔnɔ ɲɛtaa siratigɛ la.

5. PVC sɛbɛn/Film baarakɛcogo ye mun ye?

PVC sɛbɛn bɛ se ka kɛ fɛn caman ye kosɛbɛ, PVC sɛbɛn suguya wɛrɛw bɛ yen,i n’a fɔ sɛbɛnfura belebeleba PVC sɛbɛnfura/finman PVC sɛbɛnfura/jɛlen PVC sɛbɛnfura/nɛrɛma PVC sɛbɛnfura/nɛrɛma PVC sɛbɛnfura/sɛbɛn ɲɛnama PVC sɛbɛnfura/Matt PVC sɛbɛn.

K’a sababu kɛ a ka baarakɛcogo ɲuman ye, a dilanni musaka ka dɔgɔ, a bɛ se ka sɔgɔsɔgɔ, ani a bɛ se ka fɛnw tanga. PVC fɛnw nafa ka bon, u bɛ kɛ kɛrɛnkɛrɛnnenya la ka ninnu dilan: PVC kunnafoni bɛ datugu; PVC tɔgɔ kartiw; PVC ridow; PVC fomu pankurun, PVC plafond, PVC tulonkɛ karti minɛn ani PVC sɛbɛn gɛlɛn min bɛ kɛ kurukuruw kama.

PVC filimu nɔgɔlen fana bɛ kɛ ka jiri ladege suguya bɛɛ dilan bagajiw kama, farikoloɲɛnajɛfɛnw, i n’a fɔ basikɛti, ntolatan ani rugbi. A bɛ se ka kɛ fana ka cɛsirilanw dilan finiw ni lakanaminɛn kɛrɛnkɛrɛnnenw kama.Filimu nɔgɔlen fana bɛ yen walasa ka PVC tabali datugulan, PVC rido, PVC bɔrɔw, PVC pake filimu dilan.

6. PVC sɛbɛn in nafa ye mun ye?

PVC sɛbɛn fana ye plastiki sugu dɔ ye min bɛ kɛ tuma caman na. O ye resin ye min dilannen don ni polivinili kuloridi resin ye, plastiki ani farikolo tangalan, wa a tɛ baga ye. Nka, dɛmɛnan kunbabaw i n’a fɔ plastiki ni farikolo tangalanw, olu ye baga ye. Plastiki minnu bɛ don o don PVC sɛbɛnfura plastikiw kɔnɔ, olu bɛ baara kɛ kosɛbɛ ni dibutil tereftalati ni dioctil phthalate ye. Nin fura ninnu ye baga ye, wa plɔmu stearate, n’o ye PVC farikolo tangalan ye, o fana ye baga ye. Plɔmu bɛ ja ni PVC sɛbɛn minnu kɔnɔ, plɔmu kɔgɔ farikolo tangalanw bɛ sɔrɔ, olu ni etanɔli, ɛtiri ani fura wɛrɛw bɛ ɲɔgɔn sɔrɔ. Plɔmu bɛ PVC sɛbɛn min na, o bɛ kɛ dumuni foroko ye ni a ye mugu tobilen, gato tobilen, jɛgɛ tobilen, sogo tobilen, gato ani dumunifɛn misɛnninw sɔrɔ, o bɛna kɛ sababu ye ka plɔmu mɔlikuluw jɛnsɛn ka don tulu la, o la PVC sɛbɛnfura plastiki bɔrɔw tɛ se ka kɛ Dumuni bɛ kɛ a kɔnɔ, kɛrɛnkɛrɛnnenya la tulu bɛ dumuni minnu na. Ka fara o kan, kuloridi polivinili plastiki fɛnw bɛna kuloridi idɔrɔzi gazi tiɲɛ dɔɔni dɔɔni ni funteni ka bon kosɛbɛ, i n’a fɔ 50°C ɲɔgɔn, o min bɛ tiɲɛni kɛ hadamaden farikolo la. O la, kuloridi polivinili furaw man ɲi dumuniw foroko kɔnɔ.

7. PVC sɛbɛn gɛlɛnw dilannikɛla belebele 5 minnu bɛ Sinuwa jamana na, olu ye jumɛnw ye?

Jiangsu Jincai Polimɛri fɛnw dɔnniya ani seko ni dɔnko Co., Ltd.

Changzhou Huisu Qinye ka plastiki kulu

Jiangsu Jiujiu Materiel Teknoloji Co., Ltd.

Jiangsu Jumai Kura Materiel Teknoloji Co., Ltd.

Yiwu Haida Plastiki Industri Co., Ltd.

8. PVC sɛbɛn gɛlɛn baarakɛcogo ye mun ye?

K’a sababu kɛ PVC sɛbɛn baarakɛcogo ɲuman ye, fɛnw musaka dɔgɔyali, PVC sɛbɛnw nafa ka bon kosɛbɛ, u bɛ kɛ kɛrɛnkɛrɛnnenya la ka PVC Noɛli jiri filimu dilan PVC Filimu wuluwulu ka kogo dilan; PVC rapɔɔri bɛ datugu; PVC tɔgɔ kartiw; PVC kɛsu minnu bɛ yen; PVC fomu pankurun, PVC plafond, PVC tulonkɛ karti minɛn ani PVC sɛbɛn gɛlɛn min bɛ kɛ kurukuruw kama.

9. PVC sɛbɛnfura janya minnu ka ca kosɛbɛ, olu ye jumɛnw ye?

O bɛ bɔ i ka ɲinini na,an bɛ se k’a kɛ ka bɔ 0.12mm na ka se 10mm ma.

10.Kiliyan ɲinini kumasen minnu ka ca kosɛbɛ, olu ye jumɛnw ye?

Kunnafoni minnu ka ca ni kiliyanw ye, olu ye

1/2 inch pvc sɛbɛnfura

2mm pvc sɛbɛnfura

4mm pvc sɛbɛnfura

6mm pvc sɛbɛnfura

3mm pvc nɛrɛma sɛbɛn

pvc sɛbɛn nɛrɛma

pvc sɛbɛn finman