HSQY PVC /PE Laminated Thermoforming Film a Wɔde Yɛ Nneɛma a Ɛyɛ Fɛ

PVC /PE Laminated Thermoforming Film a Wɔde Yɛ Nneɛma a Ɛyɛ Fɛ

HSQY PVC /PE Laminated Thermoforming Film yɛ multilayer rigid packaging ade a ɛka thermoformable PVC structure layer ne polyethylene sealing layer bom. Wɔayɛ no ama suppository packaging, nnuru unit-dose packaging, aduruyɛ mu nneɛma a wɔapaw ne aduan-packaging dwumadie a ɛfata.

PVC layer a ɛyɛ den no ma dimensional stability, mfiridwuma ahoɔden ne thermoforming adwumayɛ, bere a PE layer no ma ɔhyew-sealable contact surface, foforo flexibility ne nsuo a ɛko tia.

PVC /PE laminate betumi ayɛ adwuma wɔ thermoform-fill-seal mfiri a ɛne no hyia so de ayɛ ankorankoro abura, ahyɛ ade a wɔakyekyere no ma na wɔayɛ ade a wɔahyɛ no agyirae. Wobetumi asusuw adan a wotumi yiyi ho bere a ɛho hia sɛ wobue no mmerɛw, bere a wobetumi apaw adan a wɔde nsɔano a ɛyɛ den ama dwumadie a ɛhwehwɛ sɛ wɔde nneɛma a wɔde ahyɛ mu no mudi mu kura a ɛkorɔn.

HSQY nso de laminate structures a ɛwɔ akwansideɛ a ɛkorɔn a PVC /EVOH/PE ne PVC / PVDC /PE ka ho ma dwumadie a ɛhia oxygen anaa nsuo a ɛba fam sen standard PVC /PE.

Nneɛma a Wɔde Yɛ Adwuma no Nsɛntitiriw: PVC /PE Laminate | Ɔhyew a wɔde yɛ nneɛma | Ɔhyew-Sealable PE Layer | Suppository Nneɛma a Wɔde Gu Nneɛma Mu | Unit-Dose Nneɛma a Wɔde Gu Nneɛma Mu | Peelable Nneɛma a Wobetumi Apaw | Aduan a Wɔde Gu Nneɛma Mu | 0.1–1.5 mm Nneɛma a Wɔatintim-Abusua Range | Ntrɛwmu a ɛkɔ soro kodu Bɛyɛ. 840 mm | Kɔla ahorow a Wɔayɛ no Amanneɛbɔ

Bisa PVC /PE Nhwɛsode ne Bo a Wɔbɔ

PVC /PE Laminated Sini Video

PVC /PE Laminated Film Nkyerɛkyerɛmu

Nkyerɛkyerɛmu a ɛwɔ aseɛ ha yi bɔ HSQY PVC laminate afiri abusua a wɔatintim mprempren no mua. Ɛsɛ sɛ wɔsi PVC kɛseɛ pɔtee, PE kɛseɛ, ne nyinaa gauge, ne tɛtrɛtɛ, kɔla, roll dimensions, sealing su ne akwansideɛ adwumayɛ so dua ma production specification a wɔapaw no.

Nhyehyeɛ a Wɔpaw: PVC /PE, PVC /EVOH/PE ne PVC / PVDC /PE ma nkabom ahodoɔ a ɛfa formability, sealing ne barrier adwumayɛ ho. Kyerɛ nhyehyɛe a wɔhwehwɛ sɛnea ade a wɔakyekyere, bere a wɔde bɛkora so, ɔkwan a wɔfa so yɛ ne nsɔano nhyehyɛe te.

Bisa Mprempren PVC /PE Mfiridwuma ho Nkyerɛkyerɛmu

Nneɛma a Ɛwɔ Hɔ Data Krataa

Wɔde fael a ɛwɔ hɔ dedaw a wobetumi atwe no asie wɔ ase hɔ sɛnea ɛbɛyɛ a wobetumi ahwɛ mu. Sɛ wopɛ sɛ wofata sɛ PVC /PE laminated film no a, ɛsɛ sɛ adetɔfoɔ a wɔyɛ adwumaden bisa mprempren PVC /PE-specific technical data krataa so nsɛm , layer construction, seal data ne akwanside ho nsɛm a ɛfata.

PET Data Krataa.pdf

Dɛn Ne PVC /PE Laminated Film?

PVC /PE laminated film yɛ ade a ɛma ɔhyew a ɛwɔ ntoatoaso pii a ɛyɛ polyvinyl chloride a ɛyɛ den a wɔde polyethylene a ɛyɛ den ayɛ.

PVC layer no ma structure nipadua ne forming su ahorow, bere a PE layer no ma sealing functionality ne contact surface foforo ma applications a PE properties pɛ.

Wɔtaa de nneɛma no ma wɔ nhoma mmobɔwee mu ma thermoform-fill-seal nhyehyɛe ahorow a wɔde yɛ suppository cavities, nnuru unit-dose packs ne nneɛma afoforo a wɔayɛ.

Sɛnea PVC /PE Film Yɛ Adwuma wɔ Nnuru a Wɔde Gu Nnuru Mu

Ɔhyew a ɛyɛ hyew PVC Layer

Wɔma rigid PVC yɛ hyew na wɔyɛ no ma ɛyɛ nneɛma a wɔde kyekyere nneɛma a wɔakyerɛkyerɛ mu. PVC kɛseɛ a ɛteɛ no gyina cavity no mu dɔ, ne kɛseɛ, line ahoɔhare ne mfiridwuma ahwehwɛdeɛ a ɛwɔ pack a wɔawie no mu.

Ɔhyew-Sealable PE Layer

Polyethylene layer no boa ɔhyew-sealing adwumayɛ na wobetumi ayɛ ama peelable bue anaasɛ den to mu su a egyina package design.

Product Contact ne Nkitahodi

Wɔ suppositories, nsuo nnuru, semi-liquid formulations anaa aduruyɛ ho nneɛma a, ɛsɛ sɛ wɔsɔ laminate a edi mũ no hwɛ sɛ ɛne product no hyia, sealing adwumayɛ ne ahwehwɛdeɛ a ɛfa packaging ho ansa na wɔafata.

Nneɛma atitiriw a ɛwɔ PVC /PE Laminated Film mu

Thermoformability a Ɛyɛ Pa

Rigid PVC ma forming adwumayɛ pa ma cavities a wɔakyerɛkyerɛ mu ne packaging geometries bere a ɔhyew ne forming tebea horow no hyia yiye ne ade no kɛse.

Ɔhyew-Sealing Adwumayɛ

PE no ani betumi ama nsɔano a wotumi de ho to so bere a wɔde abɔ mu ne aware ani a ɛfata ne nsɔano hyew a wɔahyɛ so, nhyɛso ne bere a wɔde tra hɔ no.

Bue a Wotumi Peel

Wobetumi ayɛ PVC /PE nhyehyeɛ a wɔapaw ama peel-open packaging, na ama ayɛ nea mfasoɔ wɔ so ama suppositories ne unit-dose nneɛma foforɔ wɔ baabi a ɛho hia sɛ wɔbue no yie.

Nsuo a Ɛko Tia

PE layer no boa ma nsu a ɛko tia. Wɔ nneɛma a wɔakyerɛkyerɛ mu ahwehwɛde ahorow a ɛfa nsu a ɛyɛ nwini ho no, ɛsɛ sɛ adetɔfo bisa WVTR data a wɔasusuw ma laminate no pɛpɛɛpɛ.

Mfiridwuma mu Ahoɔden

PVC layer a ɛyɛ den no ma structure support bere a wɔrehyehyɛ, ahyɛ mu ma, wɔretoto mu, wɔretwitwa, wɔrehyehyɛ na wɔde rekɔ.

Akwanside Nhyehyɛe a Wɔayɛ no Sɛnea Wɔpɛ

Wɔ nneɛma a ɛhia oxygen anaa nsuo ho banbɔ a ɛkorɔn kɛseɛ ho no, wɔbɛtumi asusu PVC /EVOH/PE anaa PVC / PVDC /PE nhyehyeɛ ho sene sɛ wɔbɛyɛ PVC /PE a ɛyɛ gyinapɛn.

PVC /PE Laminated Film Dwumadie

Suppository Nneɛma a Wɔde Gu Nneɛma Mu

PVC /PE yɛ nea wɔde di dwuma kɛse ma thermoformed suppository packaging baabi a ɛsɛ sɛ formability, ɔhyew sealing ne peel-open functionality bom yɛ adwuma wɔ packaging nhyehyɛe biako mu.

Nnuruyɛ Unit-Dose Packaging

PVC /PE laminate betumi asusuw ho sɛ ɛyɛ nsu anaa nsu fã a ɛfata nnuru unit-dose packs a wɔyɛ wɔ thermoform-fill-seal mfiri so.

OTC ne Akwahosan Ho Nneɛma a Wɔde Yɛ Nneɛma

Wobetumi de nhyehyeɛ a wɔapaw adi dwuma ama akwahosan ne nneɛma a wɔtɔn a wɔmfa nnuru nhyɛ mu bere a wɔasi so dua sɛ nneɛma no hyia, akwanside ahwehwɛde ne baabi a wɔrekɔ-gua ho nkrataa.

Aduan a Wɔapaw a Wɔde Gu Nneɛma Mu

Wobetumi nso asusuw PVC /PE nnuru a ɛfata ho ama nam, nkokɔ, mpataa, kyiisi, pasta ne aduan a wɔde kyekyere nneɛma afoforo ho bere a wɔasi aduan a wɔde di nkitaho ahwehwɛde ahorow so dua ama nhyehyɛe pɔtee a wɔde yɛ no.

Hwehwɛ mu HSQY PVC laminate film range ma gyinapɛn PVC /PE ne soro-akwanside laminate nhyehyɛe.

PVC /PE Laminated Film Dwumadi Mfonini

PVC /PE ne PVC /EVOH/PE ne PVC / PVDC /PE

Peelable PVC /PE Film a wɔde yɛ Suppository Packaging

Peelable PVC /PE nhyehyeɛ no ho wɔ mfasoɔ titire ma suppository packaging ɛfiri sɛ wɔbɛtumi ayɛ PE layer no sɛdeɛ ɛbɛyɛ a ɛbɛma package no mudi mu kura wɔ berɛ a wɔrehyɛ, akora ne kyekyɛ berɛ a ɛma kwan ma ɔdefoɔ no bue a wɔahyɛ so.

Ɛsɛ sɛ wɔde PVC /PE adansi, nsɔano hyew, nhyɛso, bere a wɔde tra hɔ ne afiri a wɔyɛ no pɛpɛɛpɛ na ɛsɔ peel ahoɔden hwɛ. Ahoɔden a ɛba fam dodo wɔ peel no mu betumi asɛe package no mudi mu kura, bere a peel ahoɔden a ɛboro so betumi ama ayɛ den sɛ wobebue.

Sɛnea Wɔde PVC /PE Film Di Dwuma wɔ Form-Fill-Seal Line so

Film Unwinding a Wɔde Yɛ Adwuma

PVC /PE rollstock no wɔde ahyɛ afiri a wɔde kyekyere nneɛma no so na wɔayiyi mu sɛnea wɔakyerɛ no.

Preheating ne Forming a Wɔyɛ

Wɔde thermoforming nhyehyɛe ne nkuku no yɛ sini no hyew na wɔyɛ no cavity geometry a wɔhwehwɛ no mu.

Product Filling

Wɔde suppository, nsu, semi-liquid anaa ade foforo a wɔapene so no hyɛ abura a wɔayɛ no mu wɔ tebea horow a wɔhwehwɛ sɛ wɔyɛ no mu.

Baabi a Ɛho Hia sɛ Wɔma Onwini

Ebia nneɛma te sɛ suppositories behia sɛ wɔhyɛ so ma ɛyɛ nwini anaasɛ wɔma ɛyɛ den ansa na wɔakata so awiei koraa na wɔatwitwa.

Ɔhyew a Wɔde Sie ne Nea Wɔde Twitwa

Wɔsɔ ade a wɔde ahyɛ mu no ano wɔ tebea horow a wɔahyɛ so mu na afei wotwitwa anaa wɔtetew mu ma ɛyɛ unit-dose format a wɔhwehwɛ no.

Sɛnea Wɔpaw PVC /PE Laminated Film

Aduru a wɔakyekyere: Kyerɛ suppository, nsu a wɔnom, semi-liquid dose, aduruyɛ mu ade, aduan a wɔde yɛ anaa ade foforo a wɔde di dwuma.

Total thickness: Ma laminate thickness a wɔhwehwɛ ne tolerance sɛnea cavity bun ne rigidity te.

PVC thickness: Si structural layer a ɛhia ma forming ne finished-package ahoɔden so dua.

PE thickness: Kyerɛ sealing layer ahwehwɛde sɛnea seal ahoɔden, peelability ne contact tebea horow te.

Roll width: Fa wɛb trɛw ne slitting tolerance a ɛyɛ pɛpɛɛpɛ a afiri a wɔde kyekyere nneɛma no hwehwɛ ma.

Core ne roll dimensions: Fa core diameter, maximum roll abɔnten diameter ne roll mu duru a wɔpɛ ma.

Forming geometry: Fa cavity kɛseɛ, cavity bun, mold drawing ne production-line ho nsɛm ma.

Nsɔano ahwehwɛde: Kyerɛ nsɔano adwumayɛ a wotumi yiyi anaasɛ ɛyɛ den ne tumi a wɔhwehwɛ sɛ ɛbue wɔ baabi a ɛfata.

Akwanside botaeɛ: Fa OTR ne WVTR ahwehwɛdeɛ ma sɛ akwansideɛ adwumayɛ ka nneɛma a ɛgyina pintinn anaa ne nkwa nna a wɔde bɛkora so a.

Tebea a wɔde hyɛ mu ma: Fa ɔhyew a wɔde hyɛ nneɛma mu ma ne nnuru anaa ngo a wɔde di dwuma ho ahwehwɛde biara a ɛfata ma.

Destination market: Ka ɔman anaa ɔmantam a wɔde nneɛma a wɔawie no bedi dwuma sɛnea ɛbɛyɛ a wobetumi ahwɛ nkrataa a ɛfata mu.

Ka Wo PVC /PE Packaging Ahwehwɛde ho asɛm

Sɛnea Wobɛgye PVC /PE Film no atom Ansa na Woahyɛ Bulk Order

Thermoforming Sɔhwɛ a Wɔde Yɛ Adwuma

Sɔ nneɛma no hwɛ wɔ afiri a wɔde yɛ nneɛma ankasa ne nkuku no so. Hwɛ cavity nkyerɛase, corner thickness, shrinkage, dimensional stability ne trim su.

Nsɔano-Mfɛnsere Sɔhwɛ

Hwɛ nsɔano adwumayɛ mu wɔ ɔhyew, nhyɛso ne bere a ɛfata a wɔde tra hɔ mu na ama woanya mfɛnsere a ɛyɛ den a wɔde yɛ nneɛma.

Peel-Ahoɔden Sɔhwɛ

Sɛ wopɛ peel-open packs a, hwɛ tumi a ɛbue ne sɛnea ɛyɛ pɛpɛɛpɛ bere a wɔayɛ, akora so na ayɛ dedaw wɔ tebea horow a wɔahyɛ da ayɛ no mu.

Akwanside Sɔhwɛ

Sɛ nsuo anaa oxygen a ɛkɔ nipadua no mu no nya nneɛma a ɛyɛ den so nkɛntɛnsoɔ a, bisa anaa hwɛ WVTR ne OTR data a ɛfa laminate nhyehyɛɛ pɔtee ho wɔ sɔhwɛ tebea a ɛfata mu.

Nhwehwɛmu a ɛfa nneɛma a ɛne ne ho hyia ho

Sɛ wopɛ nnuru a, sɔ laminate no hwɛ sɛnea wɔyɛ no ankasa na wɔde hyɛ mu ma. Hwɛ nsɔano no mudi mu kura, ne hwɛbea, nkitahodi a ɛne ne ho hyia ne sɛnea nneɛma a wɔkora so no gyina pintinn sɛnea ahwehwɛde nhyehyɛe a ɛfata no te.

PVC /PE Krataa ne Roll Packing ho nsɛm

Nhwɛsoɔ a Wɔde Gu Mu: Wobetumi abɔ nhwɛsoɔ krataa so nsɛm s ho ban wɔ nkotokuo ne nnaka a ɛfata mu sɛdeɛ nhwɛsoɔ nhyehyɛeɛ a ɛwɔ hɔ mprempren no teɛ.

Krataa a Wɔde Gu Mu: Nsɛm dedaw a wɔatintim no kyerɛ bɛyɛ kilogram 30 wɔ kotoku biara mu ma nneɛma bi a ɛyɛ den- krataa so nsɛm . Ɛsɛ sɛ wosi mprempren nneɛma a wɔde ahyɛ mu no so dua sɛnea ne kɛse ne ne kɛse te.

Roll Packing: Si roll trɛw, core kɛse, roll mu duru, abɔnten diameter, winding akwankyerɛ ne ahobammɔ wrapping ma apene production specification.

Pallet Packing: Nsɛm dedaw a wɔatintim no kyerɛ bɛyɛ 500–2000 kg wɔ plywood pallet biara mu. Pallet loading ankasa gyina roll nhyehyɛe, shipment mu duru anohyeto ne destination ahwehwɛde ahorow so.

Container Loading: Nsɛm dedaw a wɔatintim no twe adwene si bɛyɛ tɔn 20 so ma nneɛma bi a wɔde mena. Ɛsɛ sɛ wobu adesoa a etwa to no ho akontaa fi roll dimensions a wɔapene so, pallet nhyehyɛe, container type ne mmara kwan so mu duru anohyeto ahorow a ɛfata.

Nneɛma a Wɔyɛ Nhyehyɛe: Nsɛm a wɔatintim dedaw a wɔde gyina hɔ ma bɛyɛ adwuma nnafua 10–14. Mprempren bere a wɔde di kan no gyina nneɛma nhyehyɛe, dodow, sɛnea wɔyɛ no sɛnea wɔpɛ, nhwɛsode a wɔpene so ne adwumayɛbea nhyehyɛe so.

Delivery Terms: Nneɛma a wɔatintim no bi ne EXW, FOB, CNF ne DDU. Fa mprempren nsɛm a wɔafa aka no si aguadi ho nsɛm a ɛfata no so dua.

Bisa Nneɛma a Wɔde Bɛma ne Nea Wɔde Kɔma Ho Nsɛm

Nsɛmmisa a Wɔtaa Bisa Fa PVC /PE Laminated Film ho

Dɛn ne PVC /PE laminated sini?

PVC /PE laminated film ka rigid thermoformable PVC layer ne polyethylene sealing layer bom. Wɔtaa de di dwuma ma suppository, unit-dose ne afoforo a wɔahyehyɛ packaging applications.

Dɛn na wɔde PVC /PE sini di dwuma?

Nneɛma a wɔtaa de di dwuma ne suppository packaging, nnuruyɛ mu nsu anaa semi-liquid unit doses, akwahosan ho nneɛma a wɔapaw ne thermoformed aduan a ɛfata.

Dɛn nti na wɔde PE laminated wɔ PVC so ?

PE layer no ma ɔhyew-sealing dwumadie, nsakraeɛ ne nsuo a ɛko tia. Ɛgyina sɛnea wɔayɛ no so no, ebetumi nso ama wɔayɛ adwuma a wɔahyɛ da ayɛ a wɔde bue peel-open.

So wobetumi ayɛ PVC /PE sini no thermoformed?

Aane. PVC /PE fata ma thermoforming ne form-fill-seal nhyehyɛe a ɛne no hyia. Ɛsɛ sɛ wɔyɛ ɔhyew ne nhyehyɛe parameters yiye ma nhyehyɛe ne cavity nhyehyɛe pɔtee.

So PVC /PE fata ma suppository packaging?

Aane. PVC /PE yɛ nea wɔde di dwuma kɛse ma thermoformed suppository packaging baabi a formability, sealing ne peel-open dwumadie ho hia.

So PVC /PE betumi akyekye nnuru a ɛyɛ nsu anaa nea ɛyɛ nsu fã?

Wobetumi asusuw PVC /PE nhyehyeɛ a wɔapaw no ho ama nnuru unit dodoɔ a nsuo anaa nsuo fã bi wɔ mu. Ɛsɛ sɛ wɔde nnuru a ɛne ne ho hyia, nsɔano no mudi mu kura ne sɛnea wɔkora so no gyina pintinn denam nnuru a wɔayɛ no ankasa no so.

Nneɛma a ɛyɛ den bɛn na ɛwɔ hɔ?

Mprempren HSQY PVC laminate ade abusua no tintim bɛyɛ 0.1–1.5 mm. Ɛsɛ sɛ wɔsi PVC /PE total thickness ne ankorankoro layer construction no so dua ma adwuma biara.

Trɛw bɛn na ɛwɔ hɔ?

HSQY mprempren PVC laminate range tintim ntrɛwmu a ɛkɔ bɛyɛ 840 mm. Si wɛb trɛw ne slitting tolerance a wɔhwehwɛ no so dua sɛnea afiri a wɔde kyekyere nneɛma no kyerɛ.

Kɔla ahorow bɛn na ɛwɔ hɔ?

HSQY PVC laminate options a wɔatintim no bi ne pefee, tuntum ne fitaa, a custom kɔla ahorow a ɛwɔ hɔ a egyina formulation ne order dodow so.

So PVC /PE sini betumi ayɛ nea wotumi yiyi mu?

Aane. PE nnuru a wɔapaw betumi ama wɔabue a wotumi yiyi mu. Ɛsɛ sɛ wɔde peel ahoɔden fata denam ankasa production nhyehyɛe ne sealing tebea horow so.

So standard PVC /PE yɛ sini a ɛwɔ akwanside kɛse?

Standard PVC /PE ma application-specific akwanside adwumayɛ, nanso ɛnsɛ sɛ wobu no ara sɛ ɛyɛ akwanside a ɛkorɔn sen biara. Bisa OTR ne WVTR botae ahorow a wɔasusuw bere a nneɛma a ɛyɛ den gyina akwanside adwumayɛ so.

Bere bɛn na ɛsɛ sɛ wɔpaw PVC /EVOH/PE?

PVC Ɛsɛ sɛ wɔsɔ /EVOH/PE hwɛ bere a ɛho hia sɛ wɔde oxygen a ɛba fam kɛse ma sen sɛnea gyinapɛn PVC /PE betumi de ama.

Bere bɛn na ɛsɛ sɛ wɔpaw PVC / PVDC /PE?

PVC / PVDC /PE betumi asusuw bere a package no hwehwɛ sɛ wɔma gas anaa nsuo akwanside adwumayɛ a ɛkɔ anim. Ɛsɛ sɛ wɔpaw PVDC nhyehyeɛ a ɛfata sɛdeɛ botaeɛ akwansideɛ gyinabea teɛ.

So wobetumi de PVC /PE adi dwuma de ayɛ aduan a wɔde kyekyere nneɛma?

Wobetumi asusuw PVC /PE nhyehyeɛ a wɔapaw no ho ama aduane a wɔde kyekyere aduane berɛ a nnoɔma a wɔayɛ no pɛpɛɛpɛ, baabi a wɔde wɔn ho hyɛ mu ne nkrataa a ɛwɔ hɔ a ɛfa aduane a wɔde di nkitaho ho no fata ma aduane no su, ɔhyeɛ, berɛ tenten a wɔde di nkitaho ne baabi a wɔrekɔ gua.

Dɛn ne dodow a ɛba fam koraa a wɔkra?

Mprempren HSQY PVC laminate product abusua no tintim MOQ a ɛbɛyɛ 1,000 kg. Amanneɛbɔ nhyehyɛe, nsusuwii anaa kɔla betumi ahwehwɛ sɛ wɔyɛ nneɛma a ɛba fam koraa.

So metumi abisa nhwɛsode ahorow?

Aane. Wobetumi aka nhwɛsode nneɛma ho asɛm de adi kan ayɛ, nsɔano ne nea ɛne ne ho hyia ho nhwehwɛmu. Wɔkamfo kyerɛ sɛ wɔnsɔ nneɛma a wɔpɛ sɛ wɔde kyekyere nneɛma no hwɛ ansa na wɔapene nhyehyɛe foforo bi so.

Dɛn na ɛsɛ sɛ wɔsɔ hwɛ ansa na wɔakra nneɛma pii?

Hwɛ thermoforming, cavity nkyerɛase, dimensional stability, seal window, peel anaa seal ahoɔden, package integrity, OTR anaa WVTR baabi a ɛho hia ne sɛnea ɛne ade a wɔakyekyere no hyia.

Nwoma bɛn na ɛsɛ sɛ wɔn a wɔtɔ nnuru bisa?

Bisa mprempren PVC /PE adeɛ no ho nkyerɛkyerɛmu, layer adansiɛ, sɔhwɛ amanneɛbɔ a ɛfata, nkrataa a ɛyɛ papa ne nneɛma a ɛne no hyia ho nsɛm a ɛhia ma adeɛ a wɔahyɛ da ayɛ ne baabi a wɔrekɔ gua.

Nsɛm bɛn na ɛsɛ sɛ mede ma na ama wɔafa asɛm bi aka?

Fa laminate nhyehyɛe a wɔhwehwɛ, ne nyinaa kɛse, PVC ne PE layer ahwehwɛde, ne tɛtrɛtɛ, core kɛse, roll dimensions, kɔla, forming bun, seal ahwehwɛde, packaged ade, akwanside botae, dodow ne destination gua ma.

Ɛfa HSQY Plastic Kuw ho

HSQY Plastic Group de plastic a ɛyɛ den krataa so nsɛm , thermoforming rollstock ne laminated packaging materials ma packaging converters, nnuru a wɔde kyekyere nneɛma, nnuruyɛfoɔ, wɔn a wɔkyekyɛ ne amanaman ntam nneɛma a wɔde ba amannɔne.

HSQY laminate range no bi ne PVC /PE, PVC /EVOH/PE, PVC / PVDC /PE, PET/PE ne nhyehyeɛ foforɔ a wɔayɛ ama nnuru, aduane ne mfiridwuma mu nneɛma a wɔde kyekyere nneɛma.

Nneɛma a Ɛyɛ Pa ne Nneɛma a Wɔyɛ ho Nwoma

HSQY wɔ Amanaman Ntam Nnwumayɛbea Ɔyɛkyerɛ ahorow ase

Bisa sɛ wɔmfa ne bo nkyerɛ ma PVC /PE Laminated Film

Worehwehwɛ PVC /PE laminated film a wɔde yɛ suppositories, nnuru unit doses, thermoforming anaa aduan a ɛfata a wɔde kyekyere nneɛma? Send HSQY wo ahwehwɛde nneɛma nhyehyɛe, ne nyinaa thickness, layer ahwehwɛde, trɛw, roll dimensions, forming bun, sealing ahwehwɛde, akwanside botae, order dodow ne destination gua.

Di HSQY nkitaho na woanya Nhwɛsode ne Nneɛma Bo a Wɔbɔ