PET Furakɛcogo min bɛ kɛ ni funteni ye

PET Thermoforming Sheets ye mun ye?

PET thermoforming sheets ye plastiki sɛbɛn gɛlɛnw ye walima rollo minnu dilannen don walasa ka sumaya, ka dilan mɔbili kan ka nɛnɛ ka kɛ pake dafalenw ye walima izini yɔrɔw. Fɛnɲɛnɛmafagalan minnu bɛ Kɛ tuma caman na olu ye vacuum (dɔgɔtɔrɔso) dilanni, degun-sɛnɛcogo, plug-assist (plug-assist) dilanni ani matched-mold (matched-mold) dilanni ye.

HSQY bɛ PET sɛbɛnw di thermoforming sosiyetew ma, dumuni pake dilannikɛlaw ma, blister pakew tigɛbagaw ma, sɛbɛnnikɛlanw ma, izini yɔrɔw dilannikɛlaw ma ani jɛgɛfeerelaw ma.

fɛn minnu bɛ sɔrɔ , olu sugandilenw ye APET , RPET , PETG , GAG ani PET/PE lamini sɛbɛnfura ye . Fɛn kelen-kelen bɛɛ cogoya tɛ kelen ye, u jɛlen don, u tɛ funteni kunbɛn, u datugucogo, u kɔnɔfɛnw bɛ segin u cogo kɔrɔ la ani u musaka cogoya tɛ kelen ye.

Nin kulu in sinsinnen bɛ fɔlɔ PET sɛbɛnfura ni rollo fɛnw kan minnu bɛ dilan i n’a fɔ fɛn fɔlɔw walasa ka jiginɛ thermoforming kɛ. Dumunikɛyɔrɔ dafalenw, jɛgɛw ani minɛnw bɛ se ka baro kɛ u danma ka kɛɲɛ ni porozɛ ye.

PET Thermoforming sɛbɛn ɲɛfɔli

Tablo nata bɛ PET thermoforming sheet sugandiliw lajɛ minnu bɛ kɛ tuma caman na. Fɛn ɲɛfɔcogo tigitigiw bɛ bɔ fɛn sugandilen na, foroko juguya, fɛn dilannen ani komandi hakɛ.

PET Fɛn minnu bɛ sɔrɔ ka kɛ thermoforming ye

PET ye fɛnɲɛnɛma denbaya ye sanni ka kɛ sɛbɛn kelen ka kalasi ye. PET sigicogo ɲuman sugandili nafa ka bon dilan sabatili la, yɔrɔ dafalenw baaracogo la ani musaka kɔlɔsili la.

Sannikɛlaw bɛ se ka HSQY ka sɛbɛnw lajɛ    APET sɛbɛnw,    RPET sɛbɛnw,    PETG sɛbɛnw,    GAG sɛbɛnw,    PET/PE lamini sɛbɛnw ni    CPET sɛbɛnw.

Nafa jɔnjɔn minnu bɛ PET Thermoforming Sheets la

• Fɛn dilannenw yecogo ka bon : APET , RPET , PETG ani GAG sɛbɛnw jɛlenw bɛ feerelikɛlaw ni dumunifɛnw foroko jɛlenw dɛmɛ.

• Nafa bɛ gɛlɛya min na: PET sɛbɛnw bɛ se ka jɔli dɛmɛ ni fɛnw girinya dɔgɔyalenba ye.

• Kɔnɔnafili kɛcogo ɲuman : Kalansen minnu sugandira ka ɲɛ, olu bɛ se ka kariw kɛlɛ u dilanni, u minɛcogo ani u tali waati.

• Thermoforming versatility : PET sɛbɛnw bɛ se ka dilan ka kɛ sanubɔlanw ye minnu man dun, kɔnɔna jugumanw, kurukuruw, sɔgɔsɔgɔninjɛw, dawolo ani dondaw.

• Surface customization: Anti-fog, anti-static, matte, silicone, anti-block ani print-treated grades bɛ sɔrɔ.

• Dumuni foroko suganditaw: Dumuni ni ɲɔgɔn cɛ hakɛw bɛ se ka di ɲininiw kama minnu bɛ se ka kɛ ni u ɲɛfɔra sani u ka dilan.

• Sugandili minnu bɛ kɛ ni fɛnw ye minnu bɛ segin ka kɛ fɛn wɛrɛw ye : RPET sigidaw bɛ se ka porozɛw dɛmɛ minnu bɛ fɛnw ɲini minnu bɛ kɛ kɔfɛ walima minnu bɛ segin ka kɛ PET kɔnɔkow ye.

• Roll and sheet supply: Fɛn bɛ se ka labɛn walasa ka kɛ layiniw ye minnu bɛ to ka kɛ otomatiki ye walima minnu bɛ kɛ ka sɛbɛnw tigɛ.

• Ladamuni hakɛw: A janya, a bonya, a kurukuru cɛmancɛ, a sɛbɛn janya ani a foroko bɛ se ka ladilan ka kɛɲɛ ni a dilanni wajibiyalenw ye.

PET Thermoforming Sheets ka baarakɛcogo

Dumunikɛminɛnw ni minɛnw

PET sɛbɛn jɛlenw bɛ kɛ ka sanubɔlanw ni minɛnw dilan jiridenw, nakɔfɛnw, burufefɛnw, salatiw, deli dumuniw, sogo, kɔgɔjilafɛnw, fɛnɲɛnamafagalanw ani fɛn nɛnɛmaw kama.

Fɛn min bɛnnen don, o bɛ bɔ ni foroko bɛ baara kɛ ni datugulan ye min bɛ siri, ni datugulan danfaralen, ni filimu ye min bɛ wuli, ni filimu ye min bɛ funteni datugu walima ni a datugulan wɛrɛ.

Clamshell ka foroko

APET ani RPET sɛbɛnw bɛ se ka kɛ thermoformed ye ka kɛ clamshell minɛnw ye minnu bɛ siri, ka kɛ berew, tomati, burufefɛnw, fɛnɲɛnamafagalanw, ɛntɛrinɛti ani mɔgɔw ka fɛnw ye.

Charnière fanga, dadoncogo, stacking, ventilation ani anti-fog performance ka kan ka jateminɛ fɛnw sugandili waati.

Blister (Blister) ka foroko

PET sɛbɛnw bɛ se ka kɛ feerelikɛlaw ka kurukuruw ye, ɲɛda datugulanw, kurukuru minnu sirilen don, kurukuru minnu bɛ sɔgɔsɔgɔ ani lakanani foroko minnu bɛ kɛ ɛntɛrinɛti, fɛnɲɛnamafagalanw, ɲɛgɛnw, sɛbɛnnikɛlanw ani mɔgɔw ka fɛnw na.

Fɛn dilannenw juguya, u jukɔrɔla tigɛcogo, u flansɛ bonya, karti-sigicogo ani anti-static wajibiyalenw bɛ nɔ bila sɛbɛn hakɛ bɛnnen na.

Fɛn minnu bɛ tali kɛ o ko la, olu bɛ sɔrɔ HSQY’s fɛ    PET blister pakew sɛbɛn    suguya.

Sogo ni Kɔgɔjilafɛnw foroko

PET ani PET/PE sɛbɛnw bɛ se ka kɛ funteni ye ka kɛ sanubɔlan gɛlɛnw ye sogo kuraw, sogo dilannenw, kɔnɔw, jɛgɛw ani kɔgɔjilafɛnw kama.

Porozɛ minnu bɛ funteni sirili wajibiya, olu ka kan ka bɛn sanubɔlan sanfɛla ma ni datugulan-filimu sirilan ɲuman ye. MAP walima VSP baarakɛminɛnw bɛ se ka kɛ ni EVOH-based multilayer structure ye sanni ka standard mono- PET .

Furakɛcogo ni kɛnɛyako foroko

PETG ani PET sɛbɛn sugandilenw bɛ se ka kɛ minɛnw sanubɔlanw ye, lakanafɛnw dontaw ani furakɛli pakew yɔrɔw la, yɔrɔ minnu na jɛya, u ka se ka ɲɔgɔn gosi ani u hakɛw ka ɲɔgɔndɛmɛ nafa ka bon.

Furakɛcogo porozɛw bɛ ɲini ka baarakɛcogo kɛrɛnkɛrɛnnenw sɛgɛsɛgɛli kɛ sterilize, saniya, biyocompatibilité ani sariyaw cogoyaw kan.

Elektɔriki ni Industri Sani

Anti-static walima conductive PET sheet grades bɛ se ka dilan ka kɛ component trays ye, handling trays, protective inserts ani packaging for electronic assemblies.

Surface resistance wajibiyalen, saniya, dimension muɲuni ani electrostatic-discharge baarakɛcogo ka kan ka fɔ sani a ka dilan.

Fiyeere jiralanw ani lakanani datugulanw

PETG , GAG ani APET sɛbɛnw bɛ se ka dilan ka kɛ jiralan datugulan jɛlenw ye, feerekɛyɔrɔ yɔrɔw, fɛn dilannenw sow, masinw datugulanw ani izini dakunw.

PET Thermoforming Sheet ɲuman sugandicogo

Fɛn min bɛ kɛ ka ban, o ɲɛfɔ

Aw bɛ a daminɛ ni a dɔnni ye ni o fɛn bɛna kɛ dumunikɛminɛn ye, datugulan, sɔgɔsɔgɔninjɛ, kurukuru, izini sanubɔlan, jiralan datugulan walima fura wɛrɛ. Baarakɛcogo suguya wɛrɛw bɛ jɛya, gɛlɛya, sɔgɔli, sanfɛla ani datugucogo danfaralenw de wajibiya.

Aw ye Forming Depth (Sɔrɔcogo juguya) dafa

Tuma caman na, fɛn minnu tɛ dun, olu bɛ se ka baara kɛ ni APET walima RPET sariyalen ye. Kɔnɔw jugumanw, nkɔni fitininw, jatebɔcogo gɛlɛnw walima cogoya gɛlɛnw bɛ se ka nafa sɔrɔ PETG , GAG , plug-assist forming walima mold design sɛmɛntiyalen na.

A’ ye Thickness Correct sugandi

Fɛnw janya ka kan ka sugandi ka kɛɲɛ ni u juguya dabɔlen ye, kogo janya dafalen, fɛn dilannen doni, u dalajɛli wajibiyalen ani bolifɛnw cogoya makɔnɔnenw.

Ni aw ye a sugandi dɔrɔn ka kɛɲɛ ni sɛbɛnfura fɔlɔ janya ye, o bɛ se ka kɛ mɔgɔ lafilili ye bawo a fɛn bɛ kɛ fɛn ye min bɛ fin ni a bɛ senna ka tɛmɛ bɔgɔdaga kan.

Aw bɛ a dɔn ni funteni sigili ka kan ka kɛ

Standard PET tɛ siri a yɛrɛma ka da datugulan filimu bɛɛ kan. Dumunikɛyɔrɔ minnu datugulen don ni funteni ye, olu bɛ se ka PET/PE wajibiya, yɔrɔ min datugulen don walima finimugu min dilannen don kɛrɛnkɛrɛnnenya la PET kama.

Baarakɛcogo funteni wajibiyalen dafa

Standard transparent APET bɛ sugandi caman na dumunifɛnw foroko lamini na, friji kɔnɔ ani dumunifɛnw foroko kɔrɔw kama sanni ka kɛ foroko kɔnɔ.

Baara minnu bɛ kɛ ni fasa funteni ye, pastɛri kɛli, mikrowɛn, foroko kɔrɔw walima funteni caman kɛli waati jan kɔnɔ, olu ka kan ka jateminɛ ni CPET , PP ye min bɛ se ka funteni kɛlɛ walima ni fɛn wɛrɛ ye min bɛnnen don.

Aw bɛ Surface Furakɛli wajibiyalenw dɔn

Dumuni foroko minnu bɛ nɛnɛ na, olu bɛ se ka kɛ sababu ye ka furakɛli kɛ ni sisi ye. Fɛn minnu sɛbɛnnen don, olu bɛ se ka kɛ sababu ye ka corona furakɛli kɛ. Otomatiki foroko bɛ se ka kɛ ni silikoni walima anti-block furakɛli ye. Elektɔriki foroko dilanni bɛ se ka kɛ sababu ye ka baara kɛ min bɛ kɛ ni antistatique walima conductive ye.

Kɔnɔkow minnu bɛ segin ka kɛ fɛn wɛrɛw ye, olu ɲɛfɔ

Sannikɛlaw minnu bɛ RPET ɲini, olu ka kan ka fɛn segin-ka-bɔnye kɛmɛsarada la, ɲɛnayeli jigiyaw, dumuni ni ɲɔgɔn cɛ cogoyaw, kulɛri muɲuni ani taayɔrɔ-sɔgɔli wajibiyalenw fɔ.

PET Furakɛcogo min bɛ kɛ ni funteni ye

1. Fɛnɲɛnɛma sugandili : PET hakɛ, a bonya, a bonya ani a sanfɛla furakɛli bɛ sugandi ka kɛɲɛ ni fɛn dilannen ye.

2. Fɛnɲɛnɛma doni: Sɛbɛn min bɛ wuli walima min tigɛlen don, o bɛ doni thermoforming machine kɔnɔ.

3. Sumaya : Aw bɛ sɛbɛnfura sumaya fo a ka se a dilanni cogo bɛnnen na k’a sɔrɔ a ma kirisita kojugu, ka sɔgɔsɔgɔ walima ka a sanfɛla tiɲɛ.

4. Foroko : Vacuum, pressure, a plug assist walima moulu minnu bɛ bɛn ɲɔgɔn ma, olu bɛ fɛn sumalen sama ka kɛ a cogo la min ka kan.

5. Nɛnɛ: Yɔrɔ min dilannen don, o bɛ nɛnɛ k’a sɔrɔ a sirilen bɛ nɛnɛ na walasa k’a hakɛw sabati.

6. Demolding: A yɔrɔ bɛ bɔ ni mold draft, air ejection walima masin dɛmɛni ye.

7. Tigɛcogo: Web min dilannen don, o bɛ tigɛ ni nɛgɛ-sariya dies ye, punch baarakɛminɛnw, matched-metal baarakɛminɛnw, CNC minɛnw walima tigɛcogo wɛrɛw.

8. Sɛgɛsɛgɛli : Yɔrɔ dafalenw bɛ lajɛ ni kogow janya, u jɛlen don, u bonya, u karilenw, u sɔgɔsɔgɔninjɛ, u ka sisi ani u sanfɛla nafama.

9. Pakew: Yɔrɔw bɛ kɛ denso kɔnɔ, ka jate, ka don bɔrɔ kɔnɔ, ka don kɛsu kɔnɔ ani ka u bila palɛti kɔnɔ walasa ka ci.

Jateminɛ nafamaw minnu bɛ kɛ ka ɲɛsin thermoforming kɛcogo ma

Sheet (Sɛbɛnni) funteni

Foroko cogoya ɲuman bɛ bɔ PET hakɛ la, a bonya la, a funteni cogoya la, a sɛrɛkili teliya la ani a ja hakɛ la. Ni funteni kojugu bɛ se ka kɛ sababu ye ka sɔgɔsɔgɔ, ka nɔrɔ, ka kirisita, ka kɛ sisi ye walima ka yɔrɔw barika dɔgɔya, ka sɔrɔ ni funteni tɛ se ka kɛ, o bɛ se ka kɛ sababu ye ka kunnafoni juguw ni kari.

Matériel Moisture (Dɔgɔya).

PET fɛnw bɛ se ka ji minɛ u marali waati. Ni a ka kan ka kɛ ka kɔn ka ja, o bɛ bɔ PET hakɛ la, sɛbɛnfura tariku la, a maracogo la ani a kɛcogo la min bɛ kɛ ni funteni ye.

Ni bugunw, dugukolo sanfɛla taamasiɲɛw walima jɛya bɔnɛna, sannikɛlaw ka kan ka fɛnw maracogo, jisuma bɔli ani jalen ladilikanw lajɛ o suguya kɛrɛnkɛrɛnnen na.

Moule Design (Mɔgɔw ​​ka dilancogo).

Mɔgɔ jugumanba, nkɔni janya, jibɔyɔrɔ, fiɲɛbɔyɔrɔ hakɛ, sanfɛla fini, nɛnɛ ani kɔnɔna cɛ janya bɛɛ bɛ nɔ bila fɛnw tilatilali la ani yɔrɔ dafalenw jogo la.

Plug-Assist ka dilancogo

Plug assists bɛ se ka kogo-kɛnɛya tilatilali ɲɛ ka taa a fɛ dingɛ jugumanbaw kɔnɔ. Plug material, funteni, teliya, cogoya ani clearance ka kan ka bɛn molde ni PET grade ma.

Nɛnɛ waati

Nɛnɛbaliya bɛ se ka kɛ sababu ye ka fɛn tiɲɛ, ka dɔgɔya ani ka fɛnw dalajɛ minnu tɛ sabati. Nɛnɛ kojugu bɛ dɔ fara cycle waati kan ani ka dɔ fara a dilanni musaka kan.

Web Handling (Webw ɲɛnabɔli).

Roul flakɛli, winding tension, core alignment, sheet curl ani static bɛ se ka nɔ bila otomatiki baloli ni indexing accuracy la.

PET Gɛlɛya minnu bɛ sɔrɔ funteni na

PET Thermoforming Rolls vs. Tigɛsɛbɛnw

Sannikɛla minnu bɛ roll material ɲini, olu bɛ se ka HSQY ta lajɛ    PET sɛbɛnfura wulilenw.

Baarakɛcogo PET Sɛbɛn Sugandili

Anti-Fog PET Sɛbɛn

Furakɛli min bɛ kɛ ni sisi ye, o bɛ dɛmɛ ka ji misɛnniw dɔgɔya minnu bɛ se ka fɛn dilannenw yecogo bali dumunifɛnw foroko kɔnɔ minnu bɛ friji kɔnɔ.

Bugun kɛlɛli muɲuli ka kan ka jateminɛ ka kɛɲɛ ni a maracogo funteni ye, dumuni nɔgɔ, a dacogo fan ani a foroko kuntaala.

Aw ye HSQY ka sɛbɛnw lajɛ    anti-fog PET sɛbɛnw.

Anti-Static PET sɛbɛnfura

Furakɛli minnu bɛ kɛ ka banakisɛw kɛlɛ, olu bɛ dɛmɛ ka buguri samali ni a dalajɛli sabati fɛn caman tigɛli, a marali ani a yɔrɔw minɛcogo la.

Silicone-coated ani Anti-Block PET

Silikoni ni anti-block furakɛli bɛ se ka sɛbɛnw farali ɲɛ, ka roll unwinding, densting ani automatic feeding ɲɛ.

Furakɛli hakɛ ka kan ka bɛn ni sɛbɛnni, finimugu ani sigili wajibiyalenw ye.

Corona-furakɛli PET Sɛbɛn

Koronawirisi furakɛli bɛ dɔ fara dugukolo sanfɛla fanga kan, wa a bɛ se ka tintin, finimugu ani nɔrɔlenw jisigicogo ɲɛ. Sannikɛlaw ka kan ka fan furakɛlen ni surface-tension hakɛ wajibiyalen fɔ.

Matte ani Textured PET sɛbɛnfura

Mati ni fɛn dilannenw bɛ se ka dɔ bɔ yeelen bɔli la, ka ɲɛda cogoya ɲɛ walima ka magali kɛcogo kɛrɛnkɛrɛnnen di feerekɛyɔrɔw ni izini fɛnw ma.

Dumuni-Kunnafoni PET Thermoforming sɛbɛnw

Dumuni-ɲɔgɔnna PET kalasi bɛ se ka di dumunikɛminɛnw ma minnu bɛ se ka kɛ, shɔw, datugulanw, burudamɛw, fɛn dilannenw pakew ani baara wɛrɛw.

Sannikɛlaw ka kan k’a jira ko:

• Dumuni suguya

• Dumuni sɔrɔli tilennen walima a tilennen tɛ

• Ladilikan waati

• A maracogo ni a baaracogo funteni

• Ni a bɛ kɛ nɛnɛ na, a bɛ kɛ nɛnɛ na, a bɛ fa funteni na walima a bɛ sumaya kokura

• Dumuni tuluma, asidi, jilama walima jalen

• Jamana walima mara laɲinitaw

• Deklarasiyɔn walima jiginni sɛgɛsɛgɛli wajibiyalen

• Npogotiginin walima kɔnɔkow lasegincogo wajibiyalenw

Labatoli ka kan ka dafa resin dilanni tigitigi la, a kɔnɔfɛnw jɔcogo, a dacogo, a nɔrɔlen ani a foroko dafalen sanni ka miiri PET sɛbɛn kelen-kelen bɛɛ la.

PET Thermoforming Sheet Jogoɲumanya kɔlɔsili

Stable sheet quality bɛ thermoforming sosiyetew dɛmɛ ka funteni, index, forming, trimming ani finished-part performance basigilen mara.

Fɛn minnu bɛ tali kɛ jogoɲini na, olu bɛ se ka kɛ ninnu ye:

• Fɛn minnu bɛ kɛ ka fɛnw dɔn ani u dilanni

• A bonya ni a bonya muɲuni

• Roll walima sheet bonya muɲuni

• Sheet flatness ani roll winding

• Transparence, haze ani gloss

• Kulɛriw ka ɲɔgɔndɛmɛ

• Nɔgɔ nɛrɛma, jeli, kristalɛ yɔrɔw ani nɔgɔ

• Surface scratches ani roll impressions

• Corona walima coating baarakɛcogo

• Anti-fog walima anti-static baarakɛcogo ni a mago bɛ a la

• Foroko kɛcogo ani kogo-kɛnɛya tilali

• Foroko ni palɛti cogoya

PET Sɛbɛnw sabatili ni a lasegincogo jateminɛw

PET bɛ lajɛ ka segin ka kɛ sugu caman na, wa RPET sɛbɛn bɛ se ka PET seginlen don pake kura ni fɛn dilannenw na minnu dilannen don ni funteni ye.

Nka, fɛn dilannen min dilannen don ni funteni ye, o ka se ka segin a cogo kɔrɔ la, o bɛ bɔ fɛn caman na ka tɛmɛ basigi resin kan.

Fɛn nafamaw dɔw ye:

• Sigida lajɛ ni fɛnw tila-tilacogo infɔrɔmasiko

• Fɛn jɛlen walima kulɛrilen

• Npogotiginin walima fɛn minnu bɛ segin ka kɛ fɛn wɛrɛw ye

• PETG walima kopoliyetɛri kɔnɔfɛn wɛrɛw

• PE sigili layɛrɛw

• Barriyɛri layɛrɛw, finimuguw ani nɔrɔlanw

• Labels, encres ani films nɔrɔlenw

• Dumuni nɔgɔli

• Dimensions minimum minnu bɛ Sɔn ni sorting facilities ye

Laminiko fɔlenw ka kan ka sinsin pakew labɛncogo dafalen kan ani fɛn minnu bɛ taa yɔrɔ suguya la, olu ka lasegincogo bilasiralikan kan.

Custom PET Thermoforming sɛbɛn sugandiliw

HSQY bɛ dɛmɛ don PET sɛbɛnw ni sɛbɛnfura porozɛw la minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, ka ɲɛsin thermoforming dilannikɛlaw ma, dumuni pakew dilanni baarakɛlaw ma, feerekɛlaw ma ani izini fɛn caman tigɛlikɛlaw ma.

• Ladamuni PET fɛn suguya

• Laada npogotiginin ni recycled-content ratio

• Custom thickness ani muɲuli

• Custom roll bonya ni a girinya

• Ladamu sɛbɛn janya ni a bonya

• Kulɛri jɛlenw, tintin walima minnu tɛ ye

• A fini bɛ manamana, a bɛ kɛ matte ye walima a bɛ kɛ ni texture ye

• Furakɛli min bɛ kɛ ka sisi kɛlɛ

• Furakɛli min bɛ kɛ ka banakisɛfagalanw kɛlɛ walima ka furakɛli kɛ

• Silikoni walima furakɛli min bɛ kɛ ka banakisɛfagalanw kɛlɛ

• Corona furakɛli ka ɲɛsin sɛbɛnnikɛlan ma

• Filimu min bɛ mɔgɔ tanga a fan kelen walima a fan fila bɛɛ la

• PET/PE lamini walima sigilan

• Custom core ani roll diamètre

• Kartɔn ni palɛti pakew kɛcogo ladamulen

Foroko ni Dugukolo kan fɛnw cicogo

PET Sɛbɛnw ka wulicogo pakew

PET rollow bɛ se ka lakana ni filimu sirili ye, ni papiye kraft ye, ni dakun lakanani ye ani ni palɛtiw ye minnu bɛ bɔ jamana wɛrɛw la. Kurukuruw ɲɛsincogo ni palɛti jɔcogo ka kan ka sugandi ka kɛɲɛ ni kurukuru girinya ni doni jiginminɛnw ye.

Tigɛ-sɛbɛnw ka foroko

Sɛbɛn tigɛlenw bɛ se ka kɛ ɲɔgɔn kan, ka u siri, ka u lakana ni nkɔni pankurunw ye ani ka u pake jagokɛlaw ka palɛtiw kan. Filimu min bɛ mɔgɔ tanga walima papiye min bɛ ɲɔgɔn cɛ, o bɛ se ka baro kɛ yɔrɔw kan minnu bɛ se ka sɛgɛsɛgɛ.

Minɛnw doni hakɛ bɛ bɔ fɛnw hakɛ la, u bonya, u kurukuru bonya, u kurulen cɛmancɛ, sɛbɛnfura hakɛ, palɛti janya ani taayɔrɔ wajibiyalenw.

Mun na i bɛ HSQY sugandi ka kɛ i ka PET Thermoforming Sheet feerela ye?

• PET fɛn caman : APET , RPET , PETG , GAG , PET/PE ani CPET sugandiliw bɛ sɔrɔ.

• Custom extrusion: A bonya, a bonya, a kulɛri, a sanfɛla ani a roll configuration bɛ se ka ladilan.

• Dumuni foroko kɛcogo dɔnniya : Fɛn minnu bɛ sɔrɔ sanubɔlanw, sɔgɔsɔgɔninjɛ, datugulanw, kurukuruw ani pakew dilannifɛn wɛrɛw kama.

• Furakɛli minnu bɛ kɛ ni baarakɛcogo ye : Furakɛli minnu bɛ kɛ ni sisi ye, minnu bɛ kɛ ka fɛnw jɔ, silikoni, minnu bɛ kɛ ka bloki kɛlɛ ani minnu bɛ sɛbɛnni kɛ, olu bɛ se ka baro kɛ.

• Virgin ani RPET supply: Recycled-content structures danfaralenw bɛ se ka jateminɛ ka kɛɲɛ ni porozɛ ye.

• Kulu ni sɛbɛnfura cogoyaw: Fɛn minnu bɛ se ka kɛ sababu ye ka jirisunw balo minnu bɛ balo otomatiki la ani jirisunw tigɛlenw ka thermoforming minɛnw dɛmɛ.

• Misaliw jateminɛni: Misaliw bɛ se ka labɛn walasa ka foroko, sɛbɛnni, sigili ani yecogo-jogo sɛgɛsɛgɛliw kɛ.

• Dɛmɛ min bɛ kɛ ka taa jamana wɛrɛw la: Custom packing, palletizing ani international shipping suganditaw bɛ sɔrɔ.

• B2B quotation support : Sɛgɛsɛgɛli bɛ se ka lajɛ ka kɛɲɛ ni minɛnw ye, baarakɛcogo, musaka laɲinitaw ani san ɲinini.

Kunnafoni minnu ka kan ka kɛ PET Thermoforming Sheet Quote la

Walasa ka izini ka jatebɔ sɛbɛn tigitigi sɔrɔ, aw bɛ se ka nin kunnafoni ninnu caman di:

• PET suguya wajibiyalen : APET , RPET , PETG , GAG , PET/PE walima sigicogo wɛrɛ

• Fɛn min dilannen don ani a kɛcogo

• A ka kan ka kɛ sɛbɛnfura janya ni a muɲuni ye

• Kurukuru bonya walima tigɛ-sɛbɛn hakɛw

• Roll core diamètre, diamètre maximum ani girinya maksimali

• Kulɛri jɛlen, tintin walima opaque

• Surface glossy, matte walima texture

• Furakɛli min bɛ kɛ ni sisi ye, min bɛ kɛ ni fɛn ye min tɛ fɛn wɛrɛ ye, silikoni, min bɛ kɛ ka bloki kɛlɛ walima koronawirisi furakɛli

• Npogotiginin walima fɛn minnu bɛ segin ka kɛ fɛn wɛrɛw ye, olu wajibiyalen don

• Termoforming machine suguya

• Forming depth ani fɛn dilannenw ja

• Vacuum, pressure walima plug-assist forming fɛɛrɛ

• Printing, coating, folding walima die-cutting wajibiyalen don

• Funteni-sigicogo ni datugulan-filimu wajibiyalenw

• Dumuni-ɲɔgɔn-ɲini walima sariyaw ka wajibiw

• Koman hakɛ jateminɛlen ani baara kɛcogo san o san

• Foroko kɛcogo wajibiyalen

• Destination port walima delivery ladɛrɛsi

Ɲininkali minnu bɛ kɛ tuma caman na PET Thermoforming Sheets kan

Danfara jumɛn bɛ PET sɛbɛn ni PET thermoforming sheet cɛ?

PET thermoforming sheet bɛ dilan ani ka kɔlɔsi walasa ka sumaya ani ka dilan ka kɛ fɛn saba ye. Jɛnkulu PET sɛbɛn bɛ se ka kɛ sɛbɛnni, foli, fɛn dilanni walima baara wɛrɛw kama ani a bɛ se ka kɛ ko a tɛ dilancogo kelen di.

Fɛn jumɛn de ka fisa PET dumunikɛminɛnw na minnu bɛ kɛ ka kɛɲɛ ni sariya ye?

Clear APET bɛ sugandi ka caya dumunikɛminɛn kɔrɔw kama bawo a bɛ jɛya, gɛlɛya ani sɔrɔko thermoforming baarakɛcogo di. RPET bɛ se ka jateminɛ ni kɔnɔkow lasegincogo wajibiyalen don.

PET sɛbɛn jumɛn ka fisa ni thermoforming juguman ye?

PETG ni GAG bɛ jateminɛ tuma caman na walasa ka kɛɲɛ ni cogoyaw ye minnu ka dun walima minnu ka gɛlɛn. Sugandili laban bɛ bɔ ja hakɛ la, mɔli jateminɛcogo, a janya, masin suguya ani fɛn dilannenw wajibiyalenw.

Yala APET sɛbɛn bɛ se ka kɛ foro kɔnɔ wa?

Standard transparent APET ma dabɔ foro kɔnɔ baara kɛcogo kɔrɔ la. Dumunikɛminɛn minnu bɛ se ka tobi, a ka c’a la, olu bɛ CPET walima fɛn wɛrɛ de wajibiya min sɛgɛsɛgɛra kɛrɛnkɛrɛnnenya la funteni hakɛ wajibiyalen na.

Yala PET thermoforming sɛbɛnw bɛ se ka kɛ mikro la wa?

PET sɛbɛn man kan ka fɔ ko a tɛ se ka kɛ mikrowɛn na fo ni a kɛcogo tigitigi, a fɛn dilannen, a dumuni doni, a funteni ani a sumaya waati sɛgɛsɛgɛra ani ni a sɔnna.

Yala PET sɛbɛnfura ka kan ka ja sani a ka kɛ thermoforming ye wa?

Jali wajibiyalenw bɛ danfara ka kɛɲɛ ni PET suguya ye, sɛbɛnw dilanni fɛɛrɛ, mara tariku ani u dilanni taabolo. Aw bɛ fɛɛrɛko ladilikanw labato ka ɲɛsin kalasi sugandilen ma ani ka ji sɛgɛsɛgɛ ni bugunw, sisi walima dugukolo yɔrɔ taamasiɲɛw bɔra.

Yala PET sɛbɛn bɛ se ka dilan rollo kɔnɔ wa?

Awɔ. PET thermoforming sheet bɛ se ka dilan rollow kɔnɔ ka ɲɛsin automatique forming lines ma. Sannikɛlaw ka kan ka a bonya, a bonya, a kɔnɔna cɛmancɛ, a kuru cɛmancɛ, a kuru girinya ani a kurukuruni wajibiyalenw di.

Yala PET sɛbɛn bɛ se ka di i n’a fɔ sɛbɛn tigɛlenw wa?

Awɔ. Tigɛsɛbɛnw bɛ se ka dilan walasa ka jatebɔlan belebelebaw dilan, ka prototyping kɛ, ka sɛbɛnni kɛ, bololabaarakɛlaw ka masinw ani baara minnu bɛ sɛbɛnw hakɛ jɔlenw wajibiya.

Yala PET thermoforming sheet bɛ se ka datugu ni funteni ye wa?

Funteni sigili bɛ bɔ PET sanfɛla ni datugulan-filimu datugulan layɛrɛ la. PET/PE sɛbɛnw walima fɛn kɛrɛnkɛrɛnnenw minnu datugulen don PET , olu bɛ se ka wajibiya walasa ka sanubɔlanw datugu ni dannaya ye.

Danfara jumɛn bɛ APET ni RPET cɛ ?

APET bɛ PET sɛbɛn amorphe ɲɛfɔ, k’a sɔrɔ RPET bɛ PET sɛbɛn jira min kɔnɔ PET bɛ segin ka kɛ fɛn wɛrɛ ye. RPET sɛbɛn dɔ bɛ se ka kɛ ni jɔcogo ye min tɛ fɛn wɛrɛ ye hali bi nka a kɔnɔfɛnw bɛ segin-ka-bɔnye hakɛ kɛrɛnkɛrɛnnen dɔ bɛ a kɔnɔ.

Danfara jumɛn bɛ APET ni PETG cɛ ?

APET bɛ sugandi caman na walasa ka pake jɛlenw kɛ minnu musaka ka dɔgɔ ani foroko kɛcogo kɔrɔw kama. PETG a ka c’a la, a bɛ fɛn dilanni nɔgɔya ani ka baara kɛcogo ɲuman di cogoya juguw ma walima cogoya gɛlɛnw na nka a bɛ se ka kɛ ko a ka fɛnw musaka ka bon.

GAG sɛbɛn ye mun ye?

GAG ka teli ka kɛ PETG /A PET/PE TG coextruded sɛbɛn ye. PETG kɛnɛma-yɔrɔw bɛ fɛn dilanni ni sanfɛla kɛcogo ɲɛ, k’a sɔrɔ APET kɔnɔna bɛ dɛmɛ ka fɛnw musaka kɔlɔsi.

Yala anti-fog PET sɛbɛn bɛ to senna wa?

Bugun kɛlɛli baarakɛcogo bɛ bɔ furakɛli suguya la, a dacogo fan fɛ, a nɛnɛ, a funteni ani a marali waati. Sannikɛlaw ka kan ka sɛbɛn in kɔrɔbɔ ni dumuni ni a foroko cogoya yɛrɛ ye.

Yala PET sɛbɛnw bɛ se ka sɛbɛn ka sɔrɔ ka thermoforming kɛ wa?

Awɔ. PET sɛbɛn sugandilenw bɛ se ka sɛbɛn sani u ka dilan, nka seko ni dɔnko baara tiɲɛni, tintin sɛgɛsɛgɛli, u sanfɛla furakɛli, foroko juguya ani u sɛbɛnni ka kan ka jateminɛ. Sɛnɛfɛnw dilanni kɔrɔbɔliw bɛ ladilikan di.

Yala PET min bɛ segin ka kɛ fɛn wɛrɛ ye, o bɛ se ka kɛ dumunifɛnw foroko ye wa?

RPET jɔli minnu bɛ se ka kɛ, olu bɛ se ka kɛ dumuni foroko ye ni fɛnw, fɛnw sɔrɔyɔrɔ minnu bɛ segin ka kɛ fɛn wɛrɛw ye ani u jɔli bɛ bɛn yɔrɔ-sɔgɔli sariyaw ma minnu bɛ sirataama. Sɛbɛnw ka kan ka dafa fura tigitigi kan.

Yala PET fɛn minnu dilannen don ni funteni ye, olu bɛ se ka segin ka kɛ fɛn wɛrɛw ye wa?

PET fɛn dilannenw bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye. Sɔn lakika bɛ bɔ kulɛri, taamasiyɛnw, finiw, PETG kɔnɔkow, PE layɛrɛw, nɔgɔ ani sigida lasegincogo sariyaw la.

Mun bɛ kɛ sababu ye ka taamasiɲɛ finmanw bila PET thermoforming kɔfɛ?

Taamaʃyɛn finmanw bɛ se ka sɔrɔ degun fɛ, a sɔgɔli kojugu, a dilanni funteni dɔgɔyali, nɔgɔ nɔngɔn nɔgɔlenw, kristali walima fɛn tiɲɛni. Sofaw sigicogo, a janya, a dilanni teliya ani a kɛcogo ka kan ka lajɛ.

MOQ ye mun ye PET thermoforming sɛbɛnw na?

MOQ bɛ bɔ PET suguya la, a bonya, a bonya, a kulɛri, a kɔnɔfɛnw hakɛ min bɛ segin ka kɛ fɛn wɛrɛ ye ani a furakɛcogo baarakɛcogo la. Standard clear specifications normally have more flexible requirements ka tɛmɛ kulɛriw walima finiw kan minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

Yala ne bɛ se ka PET sɛbɛnw misaliw ɲini sani ka komandi kɛ wa?

Awɔ. Baro bɛ se ka kɛ misaliw kan walasa ka thermoforming, printing, heat sealing, anti-fog, anti-static ani visual-quality jateminɛ. Aw bɛ a janya, a kɛcogo ani a kɛcogo wajibiyalen di ni aw bɛ misaliw ɲini.

Kunnafoni jumɛnw ka kan ka kɛ walasa ka PET sɛbɛn dɔ laadi?

Aw bɛ fɛn dilannen, sɛbɛnfura janya, rollo walima sɛbɛnfura hakɛ, foroko juguya, masin suguya, baarakɛcogo funteni, sigili wajibiyalen, sanfɛla furakɛli, san ɲinini ani taayɔrɔ suguya di.

Aw ye PET Thermoforming Sheet Quote ɲini

Aw bɛ PET thermoforming sheet dilanbaga ɲini, APET roll feerela, RPET sheet wholesale walima custom PET/PE fɛn min bɛ dumuni pakew dilanni na wa?

Aw bɛ se ka kuma HSQY fɛ walasa ka fɛnw ladilikanw ɲini, fɛɛrɛko ɲɛfɔliw, misaliw, ka kɛɲɛ ni mɔgɔw sago hakɛw ye, izini sɔngɔw ani diɲɛ kɔnɔ fɛnw cicogo kunnafoniw.

       Quote (Quote) dɔ ɲini