250 Micron Transparent Sesẽ Pvc Matte Agbalẽvi

250 Micron Transparent Sesẽ PVC Matte Agbalẽvi

HSQY wɔa 250 micron transparent rigid PVC matte sheets na agbalẽtata, aɖaka siwo woate ŋu abla, blister packaging, nuŋlɔɖiwo ƒe nutsyɔnu, asitsatsa ƒe ɖeɖefiawo, atsyɔ̃ɖoɖo ƒe nutsyɔnu, ame ŋutɔ ƒe nyawo tsɔtsɔ de eme kple plastic nu bubu siwo wogbugbɔ trɔ.

Eƒe titrime si woɖe fia la nye 250 micron, si sɔ kple 0.25mm alo anɔ abe 9.8 mil. Titrime sia naa dadasɔ ŋutɔŋutɔ le sesẽme, asitɔtrɔ le nɔnɔmewo ŋu, agbalẽtata kple die-cutting dɔwɔwɔ me na nubablɛwo kple nɔnɔmetatawo zazã.

Matte alo frosted surface ɖea nusiwo dona tẽ dzi kpɔtɔna eye wònana nukpɔkpɔ ƒe dzedzeme fa wu PVC si me kɔ si wokɔ. Woate ŋu atrɔ asi le light-matte kple heavier frosted finishes ŋu le alesi wobia be woawɔ nu le gaglãgbe, haze, kekeli ƒe kaka kple adzamenyawo ƒe ŋusẽkpɔɖeamedzi nu.

Agbalẽvi ƒe lolome siwo wozãna ɖaa dometɔ aɖewoe nye 700 × 1000mm, 750 × 1050mm, 915 × 1830mm kple 1220 × 2440mm. Woateŋu ada didime siwo wowɔ ɖe ɖoɖo nu, agbalẽ xatsaxatsa ƒe kekeme, amadedewo, anyigba ƒe nɔnɔme kple titrime tso abe 0.06mm va ɖo 2mm ene le ewɔwɔ ƒe mɔnu nu.

Nu sia nye PVC-gba si sesẽ alo esi mesẽ o afã. Mele be woatɔtɔe kple PVC film falɛfalɛ si wotsɔ plastic wɔe si wozãna na xɔmetsovɔwo, akplowo, kplɔ̃dzivɔwo alo xɔ siwo te ŋu trɔna bɔbɔe o.

Dzro nu bliboa me HSQY PVC matte agbalẽ ƒe hatsotso na anyigba bubuwo, amadedewo kple titrime.

Bia PVC Matte Sheet ƒe Asixɔxɔ    Bia Micron 250 ƒe Kpɔɖeŋuwo

Nukae Nye 250 Micron Transparent PVC Matte Sheet?

PVC matte gbadzɛ si me kɔ si ƒe kpekpeme nye micron 250 nye polyvinyl chloride nu sesẽ tsɛ aɖe si ƒe akpa si me mekɔna boo o, si ƒe nɔnɔme le bɔbɔe alo tsikpe le eŋu.

To vovo na PVC si me kɔ si klẽna, si naa keklẽ sesẽwo nɔa keklẽm la, PVC si ƒe amadede nye matte kakaa kekeli si woɖena fiana eye wònaa wòdzena fafɛ wu, si mekɔ o.

Agbalẽa gakpɔtɔ nɔa keklẽm alo nɔa keklẽm, gake alesi tututu wòate ŋu akpɔe la nɔ te ɖe eƒe gogloƒe, afu, eƒe titrime, amadede kple nenye be axa ɖeka alo evea siaa nye matte dzi.

Le 0.25mm me la, nusi wotsɔ wɔe la sesẽ ale gbegbe na nubablɛ geɖewo ƒe nutsyɔnu, nutsyɔnu siwo wota kple nusiwo woate ŋu abla esime wòkpɔtɔ te ŋu trɔna bɔbɔe na ku lãɖeɖe, dzesidede kple tɔtrɔ.

Wozãa nya siwo nye matte PVC sheet, frosted PVC sheet, anti-glare PVC sheet kple translucent PVC film ɣeaɖewoɣi ɖe wo nɔewo yome. Ele be nuƒlelawo naɖe keklẽ, aŋɔ, nukpɔkpɔ kple nɔnɔme si hiã la gɔme tsɔ wu be woaɖo ŋu ɖe nusi wodzra ƒe ŋkɔ ɖeɖeko ŋu.

PVC Matte Sheet Nɔnɔmetata siwo me kɔ

PVC Matte Sheet ƒe Nyatakakawo

Ele be woaɖo kpe titrime mamlɛtɔ ƒe mɔɖeɖe, didime, aŋɔ, keklẽ, anyigba ƒe ƒuƒuiƒe, amadede, akpa si ŋu wowɔ atike ɖo, agbalẽtata ƒe dɔwɔwɔ kple eƒe babla dzi le adzɔnu ƒe nɔnɔme si dzi woda asi ɖo me.

Glossy kple Matte kple Frosted PVC ƒe agbalẽ

Nya matte kple frosted meɖe xexeame katã ƒe nukpɔkpɔ ƒe asixɔxɔ gɔme o. Ele be dɔ siwo bia be woakpɔ dzedzeme si dzi wokpɔna la nagblɔ keklẽ, afu, kekeli ƒe kaka kple ŋutilã me kpɔɖeŋu si dzi woda asi ɖo.

Nukatae Nàtia 250 Micron PVC Matte Sheet?

Sesẽme Si Da sɔ Kple Trɔtrɔ Ðe Nɔnɔmewo Ŋu

0.25mm ƒe agbalẽa sesẽ ale gbegbe na nutsyɔnu geɖewo, aɖakawo, nusiwo wota kple nusiwo wotsɔ tsyɔ edzi gake egakpɔtɔ le bɔbɔe be woaxɔ dzesi, ablae eye woatsoe wòaku wu ʋuƒo sesẽ si le kpekpem.

Anyigba ƒe Klẽƒe Dzi Ðeɖe Akpɔtɔ

Matte ƒe nuwuwu ɖea keklẽ tẽ tso yame akaɖiwo, asitsaƒewo ƒe akaɖiwo kple fotoɖemɔ̃ ƒe keklẽ dzi kpɔtɔna.

Nusiwo Wowɔ Falɛfalɛ ƒe Nuɖeɖefia

Frosted transparency naa nukpɔkpɔ ƒe ŋusẽkpɔɖeamedzi si fa wu eye wòdea asixɔxɔ wu nubablɛ siwo me kɔ siwo wowɔ nyuie ŋutɔ.

Agbalẽtata ƒe Anyigbadzinu si Ŋu Dɔ Wɔna

Printing-grade matte PVC ate ŋu ana ink adhesion si dzi wokpɔna na cards, dzesiwo, overlays, packaging kple boblododonuwo.

Dzimetɔtrɔ Blɔɖe

Woate ŋu atso dzeside siwo sɔ, atsɔ agbalẽwo aƒo woe, aƒo wo, atso wo, axɔ dzesi, abla wo, abla wo eye woawɔ wo kple dzoxɔxɔ.

PVC Matte Sheet na Agbalẽtata

Wozãa transparent matte PVC na agbalẽtata siwo wotsɔ blaa nu, boblododogbalẽviwo, hamevinyenye ƒe agbalẽviwo, nuɖuɖuwo, nuŋlɔɖiwo ƒe nutsyɔnuwo, nubablɛwo, ŋkɔwo kple asitsaƒewo ƒe ɖeɖefiawo.

Ðewohĩ ahiã be woawɔ dɔ na corona alo primer na ink-mɔ̃ aɖewo. Ele be nuƒlelawo natsɔ agbalẽtamɔ̃ ƒe nɔnɔme, ink ƒe atikewɔwɔ, dyne ƒe agbɔsɔsɔ si hiã, akpa si ŋu wowɔ atike ɖo kple ɣeyiɣi si wokpɔ mɔ be woadzrae ɖo hafi atae.

Ele be woado ŋutilã me nuwɔwɔ ƒe kpɔɖeŋu kpɔ be elé ɖe nu ŋu, eƒe amadede ƒe gbugbɔgadzɔ, eƒe dɔyɔyɔ, eƒe ƒoƒo ƒe tsitretsitsi kple eƒe agbalẽtata megbe babla hafi wòwɔe le agbɔsɔsɔ gã me.

PVC Matte Sheet na Aɖaka Siwo Woate Ŋu Abla

Woate ŋu atrɔ PVC gbadzɛ si ƒe lolome nye micron 250 matte wòazu kakɛ siwo woate ŋu abla, abɔta, nuƒoƒo ƒe aɖakawo kple nubablɛ ƒe fesre siwo me kɔ alo esiwo me kɔ.

• Atsyɔ̃ɖoɖo kple ame ŋutɔ ƒe belélename ƒe agbawo.

• Fefenuwo, agbalẽŋlɔnuwo kple nunanawo ƒe bablawo.

• Elektrɔnik-nuwɔnawo ƒe aɖakawo.

• Dodoɖeŋgɔ-nuwɔnawo ƒe babla.

• Atsyɔ̃ɖoɖo ƒe abɔta kple fesre siwo me kɔ nyuie.

• Kakɛ siwo wota siwo wota kple nukpɔkpɔ siwo ƒe amadede nye matte.

Ele be woado PVC si woate ŋu abla ɖe aɖaka me la akpɔ be etso ku, exɔ dzesi, eƒe ƒuƒu ɣi, eƒe gbagbã, aŋɔ ƒe adhesion kple aɖaka wɔwɔ ƒe dɔwɔwɔ le eɖokui si hã.

PVC Matte Agbalẽvi na Blister Packaging

Woateŋu awɔ thermoforming-grade matte PVC wòazu blister covers, trays, inserts kple display packaging ne nusiwo wowɔ kple wɔwɔme ƒe nɔnɔmewo sɔ nyuie.

Anyigba si ƒe amadede nye matte ate ŋu aɖe nusi wowɔ ƒe dzedzeme tẽ dzi akpɔtɔ ne wotsɔe sɔ kple PVC si me kɔ si wowɔ nyuie. Esɔ nyuie wu na nubablɛ siwo hiã be woakaka, atsyɔ̃ɖoɖo alo esiwo ƒe keklẽ dzi ɖe kpɔtɔ.

Ele be woatsɔ asisi la ƒe dɔwɔnu ŋutɔŋutɔ aɖo kpe wɔwɔme ƒe dzoxɔxɔ, do ƒe goglome, dzogoe ƒe didime, aŋɔ ƒe nɔnɔme, dzoxɔxɔ ƒe nɔnɔme kple gli si wowu enu ƒe titrime suetɔ dzi.

Ameŋunyatakakawo, Mamã Kple Atsyɔ̃ɖoɖo Dɔwɔɖoɖowo

Woate ŋu azã Frosted PVC abe adzamenyawo alo kaka ƒuƒoƒo si le bɔbɔe le framed mamawo, ɖeɖefiawo, akaɖinuwo kple atsyɔ̃ɖoɖo kpekpewo.

Zi geɖe la, agbalẽ si ƒe lolome nye micron 250 la mekɔna alo mesẽna ale gbegbe be wòate ŋu awɔ dɔ abe xɔtuɖaŋu ƒe mama si ate ŋu anɔ eɖokui si ene o.

Ele be woatsɔe aɖo xɔtunu aɖe me, atsɔe abla ɖe anyigba bubu dzi alo woazãe abe nusi wotsɔ dea eme ene. Zi geɖe la, xɔtuɖaŋu ƒe mamawo hiãa PVC, acrylic, PETG alo polycarbonate panel si le kpekpem ŋutɔ.

Matte PVC vs. Matte PET kple Matte PP

Xɔme Kple Gbedoxɔ Zazã

Wokafu standard transparent rigid PVC matte sheet koŋ na xɔme agbalẽtata, babla, agbalẽŋlɔnuwo, ɖeɖefiawo kple atsyɔ̃ɖoɖodɔwo.

Ɣe ƒe keklẽ kple gota yame ƒe nɔnɔme didi ate ŋu ana mɔ̃a nazu ɣie, wòavuvu, wòagbã, eƒe anyigba natrɔ alo mɔ̃a ƒe dɔwɔwɔ nabu.

Ele be gotadɔwo nagblɔ atike si UV-si li ke, ɣeyiɣi didi si wokpɔ mɔ be wòaxɔ, yame ƒe nɔnɔme, amadede, mɔnu si woatsɔ aɖoe kple yame ƒe nɔnɔme dodokpɔ si hiã.

Mele be woadzra PVC si wozãna ɖaa le eɖokui si be wòate ŋu anɔ te ɖe yame ƒe nɔnɔme nu tegbee alo be meɖea ɣie o.

Nuɖuɖu, Atikewɔwɔ Kple Dɔwɔwɔ Siwo Ŋu Wowɔ Ðoɖo Ðo

Mele be woaɖɔ standard matte PVC sheet le eɖokui si be esɔ na nuɖuɖu ƒe kadodo tẽ, atikewo ƒe babla alo atikewɔnuwo zazã o.

Anyonyo nɔ te ɖe PVC resin, stabilizer, ami, dɔwɔwɔ ƒe kpekpeɖeŋu, impact modifier, pigment, recycled content kple manufacturing controls si wozãna na nusi tututu wowɔ dzi.

Ele be nuƒlela siwo hiã nusiwo ŋu wowɔ ɖoɖo ɖo la nagblɔ asi si me woayi, dɔwɔwɔ, kadodo ƒe nɔnɔmewo, dodokpɔmɔnu si hiã kple nuŋlɔɖiwo hafi abia.

RoHS, REACH, SGS dodokpɔ ŋuti nyatakakawo kple ISO dzikpɔkpɔ-ɖoɖo ƒe ɖaseɖigbalẽwo ƒe lolome to vovo eye womeɖoa nuɖuɖu-kadodo alo atikewɔwɔ ƒe sedziwɔwɔ anyi le wo ɖokui si o.

Dzo ƒe Dɔwɔwɔ Kple Dɔwɔwɔ ƒe Dedienɔnɔ

Mele be woaɖɔ PVC matte sheet si me kɔ la zi geɖe be dzo mate ŋu age ɖe eme o.

Dzo ƒe dɔwɔwɔ nɔ te ɖe alesi wowɔe, eƒe titrime, dodokpɔ ƒe mɔfiame, eƒe nɔnɔme kple dzododokpɔmɔnu si wotia dzi.

Ne nyatakaka si sɔ ƒo nu tso nusi wowɔ ƒe hatsotso kple eƒe titrime tututu ŋu ko hafi wòle be woagblɔ dzotsitsi ƒe dzeside.

Zi geɖe la, womeɖoa aɖaŋu be woatsɔ laser lã PVC o elabena dzoxɔxɔ ƒe gbegblẽ ate ŋu ado dzudzɔ si me chlorine le si gblẽa nu le ame ŋu si ate ŋu agblẽ nu le dɔwɔlawo kple dɔwɔnuwo ŋu.

Zi geɖe la, wolɔ̃a mɔ̃wo ɖeɖe, ku lãɖeɖe, punching kple mɔzɔzɔ negbe ɖe PVC-dɔwɔwɔ ƒe dɔwɔnu tɔxɛwo kple eɖeɖe ƒe ɖoɖowo li hafi.

Mɔ̃ɖaŋu Ŋuti Nyatakakagbalẽviwo

Wɔ mɔ̃ɖaŋu ŋuti nuŋlɔɖi siwo li ƒe kɔpi le ete. Kpɔe ɖa be nuŋlɔɖi ɖesiaɖe ku ɖe matte ƒe anyigba, eƒe titrime, eƒe wɔwɔme, amadede kple ewɔwɔ ƒe hatsotso si tututu le ɖoɖoa me ŋu.

   Wɔ PVC Clear Sheet ƒe Nyatakakagbalẽvi ƒe kɔpi

   Wɔ PVC Sheet Dodokpɔ Ŋuti Nyatakaka ƒe kɔpi

Dodokpɔ Siwo Wokafu be Woatsɔ Akpɔ Dzedzeme Dzi

• Raw-material kple atikewɔmɔnu ƒe kpeɖodzinana.

• Titrime kple titrime ƒe mɔɖeɖe ɖe nu ŋu.

• Sheet alo roll ƒe kekeme, didime kple lãɖeɖe ƒe mɔɖeɖe.

• Nuwɔwɔ le gaglãgbe kple kekeli ƒe kaka ƒe ɖekawɔwɔ.

• Haze, gloss kple surface-roughness ƒe wɔwɔme.

• Dzɔdzɔme-kɔ alo blɔ-tint amadede ƒe ɖekawɔwɔ.

• Ʋuʋudedi, teƒe yibɔwo, gel, tɔmelã ƒe ŋkuwo kple ɖiƒoƒo.

• Sheet flatness, curl kple nugbɔ ƒe nyonyome.

• Anyigbadzi-dɔdamɔnu kple dyne-dzidzenu ƒe kpeɖodzi.

• Ink adhesion, dɔyɔyɔ kple ʋuʋudedi tsitretsitsi.

• Die-cutting, punching kple scoring dɔwɔwɔ.

• Crease whitening kple folding-crack tsitretsitsi.

• Thermoforming kple mold-release dɔwɔwɔ le afisi wòhiã le.

• Adhesive, welding kple lamination ƒe ɖekawɔwɔ.

• Ametakpɔnu film, ŋkɔwo kple nusiwo wotsɔ ɖoa ​​duta-nubablɛwo me dzodzro.

PVC Matte Sheet ƒe Tiatiawɔblɔɖe siwo wowɔ ɖe ɖoɖo nu

• Woɖee fia be eƒe titrime nye 250 micron / 0.25mm.

• Wotrɔ asi le woƒe titrime ŋu tso abe 0.06mm va ɖo 2mm ene.

• Agbalẽvi ƒe didime siwo sɔ kple esiwo wowɔ ɖe ɖoɖo nu.

• Master rolls, slit agbalẽ xatsaxatsawo kple agbalẽ gbadzawo.

• Dzɔdzɔme amadede siwo me kɔ, blɔ-tint, amadede siwo me kɔ eye womekɔ o.

• Matte nyui, tsikpe fafɛ kple tsikpe kpekpe ƒe anyigbawo.

• Matte/matte kple matte/glossy anyigba ƒe ƒuƒoƒo.

• Agbalẽtata, agbalẽxatsa-aɖaka, blister kple babla-kpa ƒe dzesiwo.

• Corona dada, primer kple anti-static tiatia.

• Film si kpɔa ame ta kple dzesidenu si wowɔ ɖe ɖoɖo nu.

• Ðetugbui leaƒe ƒe nu kple atike siwo wogbugbɔ zãna ƒe atike siwo wotia.

• A4 agbalẽwo kple agbalẽ xatsaxatsa ƒe kpɔɖeŋu siwo seɖoƒe li na hena dodokpɔ.

PVC Matte Sheet Dɔwɔwɔwo

• Agbalẽtata: Kpekpeɖeŋugbalẽviwo, nusiwo wotsɔ tsyɔ wo dzi, nuɖuɖuwo, nutsyɔnuwo, dzesiwo kple boblododonuwo.

• Aɖaka siwo woate ŋu abla: Atsyɔ̃ɖonuwo, nunana, fefenuwo, agbalẽŋlɔnuwo kple elektrɔnik-nu siwo wotsɔ blaa nu.

• Blister packaging: Nubablɛ si wowɔ si ƒe keklẽ dzi ɖe kpɔtɔ alo atsyɔ̃ɖoɖo ƒe dzedzeme.

• Agbalẽxatsaxatsawo: Matte kple frosted report, mɔfiamegbalẽ kple nuƒoƒo ƒe akpawo.

• Nudzraƒewo ƒe nukpɔkpɔwo: Atsyɔ̃ɖoɖo ƒe nusiwo wotsɔ dea eme, nusiwo kaka, nɔnɔmetata siwo wota kple nusiwo wodzrana le teƒe si wodzraa nu le.

• Ame ŋutɔ ƒe nyawo ƒe ƒuƒoƒo: Nusiwo wotsɔ dea nu me siwo ƒe kpekpeme le bɔbɔe kple atsyɔ̃ɖoɖo ƒe sinima siwo me kɔ nyuie.

• DIY kple kpɔɖeŋuwɔwɔ: Atsyɔ̃ɖoɖo ƒe akpa siwo wotso, wobla wo eye wobla wo.

Nubablɛwo Kple Wo Ðoɖoɖa

Kpɔɖeŋu ƒe babla: Woate ŋu atsɔ PE kotokuwo, pepa alo kakɛwo akpɔ A4 agbalẽwo kple kpɔɖeŋu siwo wotso ɖe ɖoɖo nu ta.

Agbawo ƒe babla: Woate ŋu atsɔ PE film, kraft pepa alo ametakpɔnu abla agbalẽ gbadzawo ɖe anyigba ƒe nudidiwo nu.

Agbalẽ xatsaxatsawo ƒe babla: Woate ŋu atsɔ ametakpɔnu kple kraft pepa abla agbalẽ xatsaxatsawo eye woatsɔ wo abla ɖe palletwo dzi.

Pallet packing: Woateŋu abla abe 500-2,000kg ɖe plywood pallet dzi le eƒe lolome, eƒe titrime kple alesi woawɔe nu.

Agbatsɔtsɔ le nugoe me: Agba si wotsɔ ɖoa ​​nu me la ade tɔn 20, le pallet ƒe ɖoɖo, lolome kple kpekpeme ƒe seɖoƒe si le se nu nu.

Ɣeyiɣi si woatsɔ awɔ dɔe: Zi geɖe la, ewɔwɔ si sɔ xɔa abe ŋkeke 7-15 ene le esi woɖo kpe eƒe nɔnɔme, agbɔsɔsɔme, babla kple fexexe dzi vɔ megbe.

Nusiwo woatsɔ aɖoe: EXW, FOB, CNF, DDU kple asitsatsa ƒe ɖoɖo bubu siwo dzi wolɔ̃ ɖo la li.

Nyatakaka Siwo Hiã Na Nyayɔyɔ

• Wobia be woate ŋu alɔ̃ ɖe eƒe titrime kple eƒe titrime dzi.

• Sheet ƒe didime alo agbalẽ xatsaxatsa ƒe kekeme.

• Dzɔdzɔme si me kɔ, blɔ-tint alo amadede si wowɔ ɖe ɖoɖo nu.

• Matte nyui, tsikpe fafɛ alo tsikpe kpekpe ƒe anyigba.

• Matte le akpa ɖeka alo akpa eveawo siaa.

• Gloss, haze alo kekeli ƒe kaka si hiã.

• Agbalẽtata, folding-box, blister, nutsyɔnu alo atsyɔ̃ɖoɖo ƒe dɔwɔwɔ.

• Agbalẽtamɔ̃, nuŋlɔtsi, nusi léna ɖe nu ŋu, aŋɔ alo mɔ̃ si trɔa nu ƒe nyatakakawo.

• Corona-dɔdamɔnu, primer alo dyne-level ƒe nudidi.

• Ðetugbui leaƒe alo nusiwo wogbugbɔ zã ƒe nudidi.

• Film si kpɔa ame ta kple dzesidede nu ƒe nudidiwo.

• Nyatakakawo alo sedziwɔwɔ ŋuti nuŋlɔɖi siwo hiã.

• Dodokpɔ ƒe agbɔsɔsɔme, ɖoɖo gbãtɔ kple ƒe sia ƒe ƒe agbɔsɔsɔme si wobu.

• Melidzeƒe si woɖo tae kple ŋkeke si wobia be woatsɔe vɛ.

Ðo Wò PVC Matte Sheet ƒe Nudidiwo ɖa

Nukatae Nàtia HSQY be wòanye Wò PVC Matte Sheet Dɔwɔƒe?

• 250 micron si me kɔ matte PVC agbalẽa wɔwɔ.

• Wotrɔ asi le woƒe titrime ŋu tso abe 0.06mm va ɖo 2mm ene.

• Standard kple customized agbalẽ alo agbalẽ xatsaxatsa ƒe didime.

• Fine matte, frosted kple anti-glare anyigba tiatia.

• Agbalẽtata, folding-box, blister kple overlay ƒe dzesiwo.

• Amadede si me kɔ, si ƒe amadede le vovovo eye wòtrɔ asi le eŋu.

• Atikewɔwɔ le anyigba dzi kple ametakpɔnu-film tiatia.

• Kpɔɖeŋuwo na agbalẽtata, babla kple wɔwɔ dodokpɔwo.

• Mɔ̃ɖaŋu-nuŋlɔɖi kple nyonyome-dzikpɔkpɔ ƒe kpekpeɖeŋu.

• Nubablɛwo ɖoɖo ɖe duta kple kpekpeɖeŋunana le dukɔwo dome tsɔtsɔ yi duta.

Hafi woawɔe le agbɔsɔsɔ gã me la, HSQY kafui be woado agbalẽvi si nètia la kpɔ to asisi la ƒe agbalẽtamɔ̃ ŋutɔŋutɔ, dɔwɔnu si wotsɔ lãa nu, mɔ̃ si wotsɔ blaa nu, nusi léna ɖe nu ŋu, blister mold alo ewɔwɔ dɔwɔnuwo zazã me.

Te ɖe HSQY ŋu hena Kpɔɖeŋuwo kple Asixɔxɔ

Nya Siwo Wobiaa Enuenu Ku Ðe 250 Micron PVC Matte Sheet Ŋu

Nukae nye PVC matte gbadzɛ si me kɔ si ƒe kpekpeme nye micron 250?

Enye 0.25mm sesẽ alo afã sesẽ PVC gbadzɛ si me kɔ eye eƒe akpa si me mekɔna boo o, si ƒe nɔnɔme le abe tsikpe ene alo esi me tsikpe le.

Aleke gbegbee PVC micron 250 ƒe titrime le?

250 micron ƒe titrime sɔ kple 0.25mm alo anɔ abe 9.8 mil.

Ðe PVC 250 micron sesẽa?

Ɛ̃. PVC ƒe wɔwɔme sesẽ naa sesẽ si ŋu viɖe le, togbɔ be 0.25mm ƒe agbalẽa gakpɔtɔ te ŋu trɔna bɔbɔe ale gbegbe be woate ŋu abɔbɔ, axɔ dzesi eye wòaƒoe hã.

Vovototo kae le matte kple frosted PVC dome?

Zi geɖe la, Matte ɖɔa anyigba si me keklẽ mele o. Zi geɖe la, frosted ɖɔa nɔnɔme si kaka wu kple afu si dzi ɖe edzi. Ele be woatsɔ kpɔɖeŋu alo nukpɔkpɔ ƒe asixɔxɔwo aɖe dzedzeme ŋutɔŋutɔ gɔme.

Ðe matte PVC si me kɔ keŋkeŋua?

Ekpɔtɔ nɔa keklẽm alo nɔa keklẽm, gake eƒe akpa si woŋlɔ ɖe edzi la ɖea eme kɔ tẽ dzi kpɔtɔna. Anyigba siwo dzi tsikpe le kpekpem wu la naa nukpɔkpɔ ƒe kaka geɖe wu.

Ðe akpa evea siaa ate ŋu anye matte?

Woateŋu ada matte/matte kple matte/glossy surface ƒokpliwo kpɔ le ewɔwɔ ƒe ɖoɖo kple agbɔsɔsɔme nu.

Ðe woate ŋu ata PVC matte gbadzɛ si me kɔa?

Ɛ̃. Agbalẽtata-grade nu ate ŋu ado alɔ offset, screen kple UV tata le ink, anyigba kple curing ƒe ɖekawɔwɔ dodokpɔ vɔ megbe.

Ðe PVC hiã corona treatment hafi woate ŋu ataea?

Ink aɖewo hiã corona treatment alo primer. Ele be nuƒlelawo nagblɔ dyne ƒe agbɔsɔsɔ si hiã kple akpa si wowɔ atike na.

Ðe woate ŋu azã PVC si ƒe lolome nye micron 250 na aɖaka siwo woate ŋu ablaa?

Ɛ̃. Woate ŋu atso aɖaka siwo woate ŋu abla ƒe dzesi siwo sɔ, axɔ dzesi, abla wo eye woabla wo ɖe aɖaka siwo me kɔ alo esiwo me tsikpe le siwo me kɔ me.

Ðe woate ŋu awɔ PVC matte sheet si me dzoxɔxɔ lea?

Woate ŋu awɔ atike si wotsɔa dzoxɔxɔ wɔa dɔe le vacuum me alo woatsɔ dzoxɔxɔ awɔe. Ele be woado dzoxɔxɔ ƒe nɔnɔmewo kple gli si wowu enu ƒe titrime akpɔ.

Ðe woate ŋu azãe atsɔ abla nu siwo me ʋuʋudedi lea?

Ɛ̃. Woate ŋu azã Matte blister-grade PVC ne ehiã be woaɖe ŋku ƒe keklẽ dzi akpɔtɔ alo akpɔ nukpɔkpɔ si kaka.

Ðe 0.25mm PVC sɔ na xɔtuɖaŋu ƒe mamaa?

Eƒe kpekpeme le sue akpa be wòate ŋu awɔ dɔ abe mama si léa eɖokui ɖe te ene. Woate ŋu azãe abe framed adzamenyawo dede, diffuser alo laminated atsyɔ̃ɖoɖo layer.

Ðe woate ŋu azã agbalẽa atsɔ abla nutsyɔnuwoa?

Ɛ̃. 250 micron matte sheet naa nutsyɔnu sesẽ aɖe si ƒe keklẽ dzi ɖe kpɔtɔ na nyatakakawo, nuƒoƒo, mɔfiamegbalẽwo kple agbalẽdzraɖoƒewo.

Ðe woate ŋu atrɔ asi le amadedea ŋua?

Ɛ̃. Woate ŋu ada dzɔdzɔme amadede siwo me kɔ, siwo ƒe amadede nye blɔ, siwo ƒe amadede me kɔ, siwo me kɔ eye womekɔ o la kpɔ.

Agbalẽvi ƒe lolome kawoe li?

Agbɔsɔsɔme siwo wozãna ɖaa dometɔ aɖewoe nye 700 × 1000mm, 750 × 1050mm, 915 × 1830mm kple 1220 × 2440mm. Woate ŋu akpɔ didime siwo wowɔ ɖe ɖoɖo nu.

Ðe woate ŋu atsɔ nuawo ana le agbalẽ xatsaxatsawo mea?

Woate ŋu ana nɔnɔme tsɛwo abe aƒetɔ alo slit agbalẽ xatsaxatsawo ne kekeme, kekeme, nuto kple nu sesẽ sɔ.

Ðe PVC matte sheet si me kɔ la te ŋu nɔa te ɖe yame ƒe nɔnɔme nua?

Wotrɔ asi le nusiwo wozãna ɖaa ŋu koŋ be woazã le xɔ me. Gbedoxɔ me dɔwɔwɔwo bia be woawɔ UV-stabilized grade kple dɔwɔwɔ ƒe yame ƒe nɔnɔme ƒe dodokpɔ tɔxɛ.

Ðe PVC matte sheet nuɖuɖu le dediea?

Mele be woazã PVC matte sheet si wozãna ɖaa le eɖokui si hena nuɖuɖu ƒe kadodo tẽ o. Wobia be woawɔ atike si sɔ kple afisi woayi ƒe asi ŋuti nuŋlɔɖiwo.

Ðe agbalẽa mewɔa nuvevi nutome oa?

Mele be woagblɔ nutome ŋuti nya siwo wogblɔna le goawo katã me kpeɖodzi siwo ɖo kpe edzi manɔmee o. Nutome ƒe dɔwɔwɔ nɔ te ɖe atikewɔwɔ, nusiwo wogbugbɔ zã, ewɔwɔ, nusiwo wowɔ ƒe ɖoɖowɔwɔ kple nutoa me gbeɖuɖɔwo dzikpɔkpɔ ƒe xɔtuɖoɖowo dzi.

Ðe woate ŋu agbugbɔ PVC matte sheet sesẽ la awɔ dɔa?

Woateŋu agbugbɔ PVC awɔ le mɔ̃ɖaŋununya nu, gake alesi woateŋu agbugbɔ awɔe ŋutɔŋutɔ nɔ te ɖe nutoa me ƒe nuƒoƒoƒu, wo ƒoƒo ɖe hatsotsowo me, wo tata, nusiwo wotsɔna léa nu ɖe ​​nu ŋu, nusiwo wotsɔ blae kple ɖiƒoƒo dzi.

Ðe woate ŋu azã PVC si wogbugbɔ zãa?

Woate ŋu akpɔ atike tiatia siwo me nusiwo wogbugbɔ zã, gake nusiwo wogbugbɔ zã ate ŋu akpɔ ŋusẽ ɖe nusiwo me kɔ, amadede, ɖiƒoƒo, agbalẽtata kple nuwɔwɔ ƒe ɖekawɔwɔ dzi.

Ðe woate ŋu atsɔ laser atso PVC matte sheet?

Zi geɖe la, womeɖoa aɖaŋu be woatso laser si wozãna ɖaa o elabena PVC si wodo dzoe ate ŋu aɖe dzudzɔ si me chlorine le si gblẽa nu le ame ŋu la ɖa. Zi geɖe la, wodina be yewoatsɔ mɔ̃ atsoe alo atsoe le ku me.

Nukae nye nudɔdɔ ƒe agbɔsɔsɔ suetɔ kekeake?

MOQ si wozãna ɖaa la ade 1,000kg. Amadede, nɔnɔme, atikewɔwɔ kple didime siwo mebɔ o siwo wowɔ ɖe ɖoɖo nu ate ŋu abia agbɔsɔsɔ bubu.

Ðe woate ŋu akpɔ kpɔɖeŋuwo femaxeea?

Stock samples ateŋu anɔ anyi hena ŋkuléle ɖe eƒe titrime, haze, texture, tata kple babla ŋu. Zi geɖe la, nuƒlelae xea agbatsɔtsɔ si woɖona ɖe amewo.

Nukae nye ɣeyiɣi si woatsɔ awɔe?

Zi geɖe la, ewɔwɔ si wozãna ɖaa xɔa abe ŋkeke 7-15 ene le esi woɖo kpe eƒe nɔnɔme, agbɔsɔsɔme, babla kple fexexe dzi vɔ megbe.

Nyatakaka kawoe hiã hafi woate ŋu ayɔ nyayɔyɔ?

Na eƒe titrime, didime, amadede, matte ƒe seƒe, dɔwɔwɔ, agbalẽtata alo wɔwɔme ƒe ɖoɖo, agbɔsɔsɔme, babla, teƒe si woayi kple nyatakaka siwo hiã.

Na PVC Matte Sheet Quote si wowɔ ɖe ɖoɖo nu

Ku ɖe HSQY Plastic Group ŋu

Changzhou Huisu Qinye Plastic Group Co., Ltd. naa PVC gbadzɛ sesẽ siwo me kɔ, PVC agbalẽvi siwo matte, agbalẽtata ƒe agbalẽwo, nutsyɔnu siwo blaa nu, agbalẽ siwo wotsɔ blaa nu kple plastik nu bubu siwo wowɔ ɖe ɖoɖo nu na dukɔwo dome B2B asisiwo.

HSQY doa alɔ agbalẽtamɔ̃wo, nubablɛwo trɔlawo, agbalẽ xatsaxatsa-aɖaka wɔlawo, thermoforming dɔwɔƒewo, agbalẽŋlɔnuwo dzralawo, nusiwo wotsɔ tso duta vɛ kple mamalawo kple kpɔɖeŋu ƒe dodokpɔ, ewɔwɔ si wowɔ ɖe ɖoɖo nu, nyonyome me toto kple nubablɛ siwo wotsɔ ɖoa ​​duta.

Bia Nya Siwo Woagblɔ Kple Kpɔɖeŋu