Takardar Launi ta PVC tare da Kariyar UV

Takardar PVC Mai Launi Mai Tsabta ta UV

HSQY tana ƙera zanen PVC masu launuka masu haske waɗanda aka daidaita da UV don alamun waje da na ciki, nunin da aka buga, rufin bango, allunan ado, abubuwan da aka haɗa da thermoformed, murfin kayan aiki da ƙera masana'antu.

Kayan yana da tauri, mara kumfa, wanda ake samu a launuka masu haske, masu haske da kuma masu haske. Launuka na yau da kullun sun haɗa da fari, baƙi, ja, rawaya, kore da shuɗi, yayin da launuka na musamman za a iya daidaita su bisa ga samfurin zahiri, ma'aunin RAL, ma'aunin Pantone ko ma'aunin launi da aka amince da shi.

Kauri na takardar da aka saba amfani da shi ya kama daga kimanin 0.21mm zuwa 6.5mm. Fina-finan PVC masu siriri da zanen gado daga kimanin 0.06mm zuwa 0.20mm suma suna iya samuwa dangane da tsarin samarwa, tauri, faɗi da buƙatun aikace-aikace.

Girman takardar da aka saba amfani da shi ya haɗa da 700 × 1000mm, 915 × 1830mm da 1220 × 2440mm. Ana iya tattauna girman takardar da aka keɓance, guntun da aka yanke da kuma tsarin birgima a cikin kimanin faɗin samarwa na 1280mm.

Ana samar da kariyar UV ta hanyar amfani da tsari na musamman wanda ya ƙunshi masu daidaita yanayi, launuka da ƙari masu dacewa. Aikin waje ya dogara ne akan launi da aka zaɓa, kauri, yanayi, shigarwa, fallasa hasken rana da tsawon lokacin sabis ɗin da ake buƙata.

Bai kamata a bayyana PVC mai launi na yau da kullun a matsayin wanda ya dace da amfani na dindindin a waje, hulɗa da abinci, na'urorin likitanci, tankunan sinadarai, aikace-aikacen hana gobara ko takamaiman rarrabuwar wuta ba. Waɗannan aikace-aikacen suna buƙatar takamaiman matakin da aka amince da shi da kuma bayanan gwaji masu goyan baya.

Bincika cikakken Zane-zanen launi na PVC na HSQY ko bita samfuran takardar PVC masu tauri.

Nemi Farashin Takardar PVC    Nemi Samfuran Launi da UV

Bidiyon Takardar PVC Mai Launi

Kalli bidiyon da ke ƙasa don yin bitar zanen PVC masu launi na HSQY, tsarin samarwa, zaɓuɓɓukan ƙera da mafita na zanen filastik na musamman.

Hotunan Takardar PVC Masu Launi

Menene Takardar PVC Mai Launi Mai Launi Mai Launi ta UV?

Takardar PVC mai launi mai haske mai haske ta UV takardar polyvinyl chloride ce mai ƙarfi wadda aka ƙera da launuka masu daidaita hasken ultraviolet don rage lalacewa da hasken rana ke haifarwa.

Takardar na iya zama mai haske, mai haske ko kuma mai haske kuma ana iya yin ta a cikin launuka masu sheƙi, matte, mai sanyi, mai laushi ko kuma waɗanda aka keɓance musamman.

Kayan yana ba da ƙarfi mai amfani, juriya ga sinadarai, rufin lantarki da aikin ƙera don alamu, nunin faifai, kayan aiki da zaɓaɓɓun aikace-aikacen masana'antu.

Daidaitawar hasken UV na iya rage raguwar launi, rawaya, alli a saman, asarar sheƙi da kuma ɓacin rai, amma ba ya sa kowace dabarar PVC ta kasance mai jure wa yanayi na dindindin.

Dole ne a tabbatar da dacewa da waje don ainihin launi, launi, kauri, kunshin UV, yanayi da lokacin sabis ɗin da aka nufa.

Bayanin Takardar PVC Mai Launi Mai Daidaita UV

Bayanan ƙarshe yakamata su gano cikakken matakin tsari, haƙurin kauri, girma, nunin launi, sheƙi, saman, buƙatar UV, gwajin yanayi, tsarin ƙera da kuma shigarwa da aka yi niyya.

Takardar PVC Mai Tauri da Takardar Kumfa ta PVC

Bai kamata masu siye su kwatanta takardar PVC mai ƙarfi da allon kumfa na PVC ta amfani da kauri kawai ba. Nauyin takardar, yawanta, tauri, riƙe manne da kuma halayen ƙera ta sun bambanta.

Yadda Ake Kimanta Kariyar UV

Ya kamata a ayyana juriyar UV ta hanyar maƙasudin aiki mai aunawa maimakon bayanin gaba ɗaya na hana UV.

Sharuɗɗan da aka fi sani da saurin yanayi sun haɗa da ASTM D4329, ASTM G154 da ISO 4892-3. Rahoton ya kamata ya bayyana nau'in fitilar, hasken rana, zafin jiki, danshi ko zagayowar ruwa da kuma jimillar lokacin da aka fallasa shi.

Gwaji mai sauri yana da amfani wajen kwatanta kayan aiki amma ba ya daidai da adadin shekaru da aka ƙayyade a waje a kowace yanayi.

Zaɓin Launi don Takardun PVC na Waje

Sinadarin sinadarai na pigment yana shafar daidaiton launi, shanyewar UV, tarin zafi da kuma bayyanarsa na dogon lokaci.

Launuka fari da haske galibi suna shan zafi kaɗan a rana fiye da launukan duhu. Baƙi, shuɗi mai duhu, kore mai duhu da ja mai duhu na iya kaiwa ga yanayin zafi mafi girma a saman hasken rana kai tsaye.

Zafin takardar da ya fi girma zai iya ƙara faɗaɗa zafi, durƙusawa, damuwa mai ɗaurewa da motsi mai girma.

Ayyukan waje ya kamata su ƙayyade launi, yanayin shigarwa, girman faifan, tazara tsakanin tallafi, share ramuka, zafin da ake tsammani da lokacin sabis ɗin da aka nufa.

Bai kamata a shafa sakamakon yanayi na launi ɗaya ta atomatik ga wani launi ko inuwa daban ba.

Aikace-aikacen Bugawa da Alamomi

Ana iya amfani da zanen PVC masu launi mai laushi don alamun da aka buga, zane-zanen baje koli, nunin kaya, alamun jagora da allunan talla.

Ya kamata a gwada bugu a kan ainihin saman, launi da kuma rukunin samarwa. Ƙananan substrates na iya buƙatar farin tawada ko kuma wani Layer na firam mai haske.

Ƙirƙira da Tsarin Haske

• Yi amfani da ruwan wukake masu kaifi, na'urorin ratsawa, kayan aikin niƙa da kuma injinan da aka ƙera don zanen filastik.

• Tallafa takardar yayin aikin injin don rage girgiza, guntu da lalacewar gefen.

• A bar isasshen sarari a kusa da ramukan hawa na waje don faɗaɗa zafi.

• A guji matse manne da yawa, musamman a kan manyan bangarori na waje.

• Yi amfani da yanayin dumama da mold da ya dace don samar da injin tsotsa ko matsi.

• Tabbatar da riƙe launi da sheƙi bayan an yi amfani da thermoforming.

• Yi amfani da sandunan walda, manne da simintin da suka dace da PVC.

• Gwada manne a kan ainihin launi, saman da kuma tsarin UV.

• Samar da iska yayin dumama, walda da ƙera zafi.

• Kada a yi amfani da kayan aikin yanke laser ko sassaka laser na yau da kullun don PVC.

Tsarin Samarwa

HSQY yana amfani da extrusion ko kalanda bisa ga kauri, faɗi, saman da tsarin samfurin da aka zaɓa.

Kayan Danye da Haɗa Launi

Ana aunawa da haɗa resin PVC, masu daidaita abubuwa, launuka, kayan aikin sarrafawa, masu gyara tasirin da ƙarin UV na musamman akan aikace-aikace bisa ga tsarin da aka amince da shi.

Fitarwa ko Kalanda

Ana sarrafa mahaɗin zuwa takarda ko fim ta amfani da yanayin zafin jiki, matsin lamba, saurin layi da yanayin abin birgima.

Kammalawar Fuskar

Ana iya goge saman, a goge shi da matte, a yi masa fenti ko a yi masa fenti bisa ga ƙa'idar samfurin da aka amince da ita.

Sanyaya da Kulawa Mai Girma

Sanyaya mai sarrafawa yana taimakawa wajen kiyaye daidaiton kauri, siffa, faɗi da daidaiton girma.

Yankan, Naɗewa da Dubawa

Ana yanka samfurin a cikin zanen gado ko a naɗe shi a cikin birgima, a duba shi sannan a naɗe shi bisa ga ƙa'idar da aka amince da ita.

Amfani da Takardun PVC Masu Launi Masu Tauri

• Alamun waje: Alamun alkibla, alamun aminci da faifan bayanai ta amfani da ingantaccen matakin UV mai karko.

• Talla a cikin gida: Allunan da aka buga, alamun talla da kuma zane-zanen baje kolin.

• Nunin dillalai: Nunin POP, masu riƙe samfura, kayan shiryayye da kayan haɗin alama.

• Rufin ciki: Allon bango na ado, sassan bango da kuma allunan saman da aka tallafa.

• Abubuwan da aka gyara a cikin thermoformed: Murfi, gidaje, tire da kayan nuni da aka ƙera.

• Ƙirƙirar masana'antu: Allon kayan aiki, masu gadi, layuka da kuma kayan aikin filastik da aka ƙera.

• Kayan aikin sinadarai: Tankuna, bututun ruwa da layukan da aka zaɓa ta amfani da kimantawar da aka amince da ita a fannin masana'antu da kuma juriya ga sinadarai.

• Aikace-aikacen lantarki: Faifan rufi da abubuwan da aka haɗa sun dogara da buƙatun lantarki da harshen wuta.

• Samfura da alamu: Samfura masu launi masu ɗorewa, jagororin yankewa da kayan aikin ƙera.

Masana'antu da Aikace-aikacen Sinadarai

Ana amfani da PVC mai ƙarfi a cikin zaɓaɓɓun aikace-aikacen sarrafa sinadarai da kuma sarrafa ruwa saboda yana iya jure wa acid, alkalis da kuma maganin gishiri da yawa.

Juriyar sinadarai ta dogara ne akan ainihin abu, yawan aiki, zafin jiki, matsin lamba, lokacin fallasawa, matsin lamba na inji da hanyar walda.

Bai kamata a yi amfani da takardar talla mai launi ta atomatik ba ga tankunan sinadarai, kayan aikin lantarki ko tsarin ruwan sha.

Ayyukan masana'antu ya kamata su yi amfani da takardar PVC-U mai inganci ta sinadarai tare da takaddun da suka dace da sinadarai, ƙarfin walda da kuma yanayin sabis na dogon lokaci.

Mai hana harshen wuta, mai hana kumburi da kuma maki na musamman

Aikace-aikacen Kula da Abinci da Lafiya

Bai kamata a bayyana takardar PVC mai launi mai haske ta UV a matsayin wacce abinci ke iya taɓawa ko kuma wacce ba ta da illa ga lafiya ba.

Dacewar hulɗa da abinci ya dogara ne da resin PVC, masu daidaita abinci, launuka, ƙari, abubuwan da aka sake yin amfani da su, nau'in abinci, lokacin hulɗa, zafin jiki da kasuwar da za a je.

Aikace-aikacen likita na iya buƙatar kayan aiki masu sarrafawa, bin diddiginsu, tsafta, bayanai game da yadda za a iya daidaita yanayin halittu, gwajin tsaftace muhalli da kuma tabbatar da ingancin samfuran da aka gama.

Masu siye ya kamata su samar da ainihin buƙatun ƙa'idoji da gwaji kafin su zaɓi takamaiman matakin PVC na abinci ko na likita.

Gwaje-gwajen Kula da Inganci da Aka Ba da Shawara

• Resin PVC, mai daidaita, tabbatar da launi da ƙari.

• Juriyar kauri da kauri.

• Tsawon takardar, faɗi da kuma haƙurin diagonal.

• Faɗi, baka, lanƙwasa da yanayin gefen.

• Tabbatar da yawa da nauyin takardar.

• Ma'aunin launi da bambancin launi tsakanin tsari da tsari.

• Mai sheƙi, matakin matte da kuma daidaiton yanayin saman.

• Baƙaƙen tabo, gels, ramuka, alamun kwarara, ƙaiƙayi da gurɓatawa.

• Ƙarfin tauri, tsawaitawa da modulus inda aka ƙayyade.

• Ƙarfin tasiri da aikin tasirin sanyi inda ake buƙata.

• Vicat yana tausasawa da kuma rage zafi.

• Canjin girma bayan fallasa zafi.

• Fitar da hasken UV, bambancin launi da kuma riƙe sheƙi.

• Rike kadarorin da suka lalace ko kuma riƙe su da ƙarfi.

• Buga mannewa da juriyar abrasion.

• Gwaje-gwajen thermoforming, lanƙwasawa, walda da haɗin kai.

• Gwaje-gwajen juriya ga sinadarai don aikace-aikacen masana'antu.

• Gwaje-gwajen juriya ga saman don matakan antistatic.

• Gwaje-gwajen ƙonewa don matakan hana ƙonewa.

• Duba kaya, fakiti da kuma duba kwantena.

Zaɓuɓɓukan Takardar PVC Masu Launi Na Musamman

• Kauri na takardar da aka saba da shi daga kusan 0.21mm zuwa 6.5mm.

• An zaɓi takamaiman siraran fim daga kimanin 0.06mm.

• 700 × 1000mm, 915 × 1830mm da kuma zanen gado 1220 × 2440mm.

• Girman takardar da aka keɓance da kuma guntu-guntu masu girman da aka yanke.

• Fari, baƙi, ja, rawaya, kore, shuɗi da launuka na musamman.

• Kayayyakin da ba su da haske, masu haske da kuma launuka masu haske.

• Daidaita launi na RAL, Pantone da samfurin jiki.

• Sama mai sheƙi, matte, mai sanyi da kuma embossed.

• A cikin gida, an daidaita shi da UV kuma an yi masa aiki a waje.

• Bugawa, thermoforming da kuma masana'antu-ƙirƙira maki.

• Tsarin da aka gyara ta hanyar tasiri, mai hana harshen wuta da kuma maganin hana sata.

• Fim ɗin kariya a gefe ɗaya ko duka biyun inda ya dace a zahiri.

• Lakabi na musamman, pallets, marufi da alamun jigilar kaya.

Bayanan da ake buƙata don ƙimar takardar PVC

• Kauri da haƙuri da ake buƙata.

• Girman takardar ko naɗi da ake buƙata.

• Takardar roba ko wani gini na PVC.

• Bayyanar da ba ta da haske, ko kuma bayyananniyar siffa.

• Launi da ake buƙata, RAL, Pantone ko samfurin jiki.

• Fuskar mai sheƙi, matte, mai sanyi ko kuma mai embossed.

• Aikace-aikacen cikin gida ko waje.

• Ƙasar da ake zuwa da kuma yanayi.

• Lokacin hidima na waje da ake tsammani.

• Matsayin da ake buƙata na kariya daga UV da lokutan fallasa.

• Matsakaicin bambancin launi, rawaya ko ƙarancin sheƙi.

• Tsarin bugawa, yankewa, gyaran thermoforming, walda ko haɗin kai.

• Tasirin da ake buƙata, harshen wuta, antistatic ko sinadari.

• Bukatar fim mai kariya.

• Rahoton gwaji da ake buƙata da takardun bin ƙa'ida.

• Adadin odar farko da kuma ƙimar buƙata ta shekara-shekara.

• Shiryawa, tashar jiragen ruwa da kuma ranar isarwa da ake buƙata.

Aika Bukatun Takardar PVC Mai Launi

Takardun Bayanan PVC Masu Alaƙa da Rahoton Gwaji

Shafin asali ya ƙunshi takardu da dama na bayanai na PVC da rahotannin gwaji. An ajiye su a ƙasa a matsayin takardun shaida masu alaƙa.

Wasu takardu sun shafi fim mai haske, allon toka, takardar bugawa ta offset ko wani samfurin PVC. Kafin amfani da rahoto, tabbatar da cewa tsarin sa, launi, kauri, wurin samarwa da samfurin gwaji sun shafi ainihin takardar PVC mai launi mai daidaita UV da ake saya.

   Takardar Bayanan Takardar PVC Mai Tsabta

   Flammability na PVC Tauri Sheet

   Rahoton Gwajin Allon Laushi na PVC

   Takardar Bayanan Fim ta PVC Mai Bayyana

   Rahoton Gwajin Takardar PVC

   Rahoton Gwajin Allon Toka Mai 20mm

   Rahoton Gwajin Buga Takardar PVC don Biyan Kuɗi

Marufi da Isarwa

Samfurin tattarawa: Za a iya kare zanen gado na A4 da launuka masu launi da jakunkunan PE kuma a saka su a cikin kwali na jigilar kaya.

Marufin Takarda: Za a iya naɗe zanen PVC mai faɗi da fim ɗin PE ko takarda kraft sannan a kare shi da pallets masu tauri.

Kunshin nadi: Za a iya naɗe siririn roƙon PVC da fim mai kariya da takarda kraft a kusa da tsakiyar takarda mai girman mm 76.

Kariyar saman: Ana iya tattauna fim ɗin kariya na gefe ɗaya ko na gefe biyu don zanen gado masu sheƙi waɗanda ke buƙatar kariyar karce.

Shirya fale-falen: Ana iya sanya zanen gado a kan plywood ko kuma fale-falen fitarwa marasa feshi tare da kariyar gefe, madauri da fim ɗin shimfiɗawa.

Marufi na musamman: Ana samun lakabin sirri, tambarin da aka buga, barcode da alamun jigilar kaya na musamman.

Lodawa a cikin kwantena: Yawan lodawa ya dogara da kauri, girman takardar, ƙirar fallet, diamita na birgima da iyakokin nauyin kwantena na doka.

Lokacin samar da kayayyaki: Tsarin samarwa na yau da kullun yana buƙatar kimanin kwanaki 7-15 bayan an tabbatar da launi, tsari, ƙayyadaddun bayanai, samfurin, marufi da ajiya.

Takaddun Shaida da Takardun Bin Dokoki

Takardun da ake da su na iya haɗawa da takaddun bayanai na fasaha, takaddun bayanai na aminci, rahotannin abubuwan da aka takaita, rahotannin kadarorin jiki, rahotannin yanayi na UV, rahotannin ƙonewa da takaddun shaida na sarrafa inganci.

Ya kamata a duba kowace takarda bisa ga ainihin tsari, launi, kauri, saman, wurin samarwa da samfurin gwaji.

Ya kamata a bayyana SGS bisa ga ainihin iyakokin gwaji kuma bai kamata a gabatar da shi azaman takardar shaidar samfuri ta duniya ba.

ISO 9001 yana da alaƙa da tsarin kula da inganci na ƙungiya kuma baya kafa juriyar UV, aikin wuta, amincin abinci ko dacewar sinadarai kai tsaye.

Ya kamata a tabbatar da mai takardar shaidar, wurin da aka ƙera shi, bugu na yau da kullun, iyaka da lokacin inganci kafin a buga shi.

Nunin Duniya na HSQY

Me Yasa Za Ka Zabi HSQY A Matsayin Mai Kaya Takardar PVC Mai Launi?

• Zane-zanen PVC masu launuka masu ƙarfi don bugawa, alamomi da ƙera su.

• Kauri na yau da kullun daga kimanin 0.21mm zuwa 6.5mm.

• Girman takardar da aka tsara da kuma na musamman.

• Zaɓuɓɓukan launi masu haske, masu haske da kuma bayyanannu.

• Daidaita launi na RAL, Pantone da samfurin jiki.

• Kammalawa masu sheƙi, matte, frosted da embossed.

• Maki na waje wanda aka daidaita ta hanyar UV a cikin gida da aikace-aikace.

• Bugawa, thermoforming da kuma masana'antar ƙera kayayyaki.

• Samfura don launi, UV, bugawa da kimantawa na ƙera.

• Duba inganci bisa ga samfuran da aka amince da su da ƙayyadaddun bayanai.

• Marufi na musamman da tallafin jigilar kaya na ƙasashen waje.

Kafin a samar da kayayyaki da yawa, HSQY ya ba da shawarar a gwada takardar PVC da aka zaɓa ta amfani da ainihin bugawa, yankewa, ƙirƙirar, haɗawa, walda da yanayin shigarwa na waje na abokin ciniki.

Tuntuɓi HSQY don Samfura da Farashi

Tambayoyin da Ake Yawan Yi Game da Takardun PVC Masu Launi Masu Daidaita UV

Menene takardar PVC mai launi mai tauri?

Takardar PVC ce mai ƙarfi, wacce ba ta kumfa ba wadda aka ƙera da launuka don ƙirƙirar kayan da ba su da haske, masu haske ko masu haske.

Menene ma'anar PVC mai daidaita UV?

Yana nufin cewa hadadden maganin ya ƙunshi ƙarin abubuwa da aka zaɓa don rage faɗuwar rana, rawaya, asarar sheƙi da kuma bushewar fata.

Shin PVC mai ƙarfi da UV yana kare yanayi har abada?

A'a. Aikin waje ya dogara ne akan tsari, launi, kauri, yanayi, shigarwa, alkiblar fallasa da lokacin sabis ɗin da ake buƙata.

Za a iya amfani da kowace launi a waje?

Ya kamata a tantance kowace launi daban-daban domin launuka suna tasiri ga daidaiton UV, sha da zafi da kuma riƙe launi.

Shin zanen PVC masu duhu suna yin zafi a waje?

Launuka masu duhu yawanci suna shan zafi fiye da launin fari ko haske, wanda zai iya ƙara faɗaɗa zafin zafi da zafin panel.

Ta yaya ake gwada juriyar UV?

Gwaji na iya amfani da ASTM D4329, ASTM G154, ISO 4892-3 ko wata hanya da aka amince da ita, tare da kimanta launi, sheƙi, rawaya da kuma riƙe kadarorin injiniya.

Shin gwajin UV na sa'o'i 1000 daidai yake da adadin shekarun da aka ƙayyade a waje?

A'a. Ana amfani da gwaje-gwajen gaggawa galibi don kwatanta kayan da ke ƙarƙashin yanayin da aka sarrafa kuma ba ya daidaita daidai lokacin waje ɗaya a kowace yanayi.

Wadanne kauri ake samu?

Kauri na takardar da aka saba samu ya kama daga kimanin 0.21mm zuwa 6.5mm. Zaɓaɓɓun ƙayyadaddun bayanai na iya samuwa daga kimanin 0.06mm.

Waɗanne girman takardar da ake da su?

Girman da aka saba amfani da shi ya haɗa da 700 × 1000mm, 915 × 1830mm da 1220 × 2440mm.

Za a iya samar da girman takardar al'ada?

Eh. Ana iya samar da girma na musamman da kuma kayan da aka yanka a cikin faɗin da kuma iyakokin kayan aiki.

Wadanne launuka ne ake samu?

Launuka na yau da kullun sun haɗa da fari, baƙi, ja, rawaya, kore da shuɗi. Ana iya daidaita ƙarin launuka zuwa ga alamar da aka amince da ita.

Shin HSQY zai iya daidaita launin RAL ko Pantone?

Eh. Ana iya kimanta daidaiton RAL, Pantone ko samfurin jiki dangane da samuwar launuka da kuma mafi ƙarancin adadin oda.

Ana samun zanen PVC masu launi masu haske?

Eh. Ana iya samar da launuka masu haske da haske bisa ga buƙatun gani da kauri.

Shin wannan takardar PVC iri ɗaya ce da allon kumfa na PVC?

A'a. Wannan samfurin takardar PVC ce mai kauri. Allon kumfa na PVC yana da ƙwanƙwasa mai sauƙi kuma yana da ƙarancin yawa sosai.

Za a iya buga zanen PVC masu launi?

Ana iya buga saman da ya dace da allo, a buga tawada ta UV ko a buga UV bayan an yi gwajin mannewa da kuma gogewa.

Za a iya buga zanen PVC masu duhu da zane-zane masu launin haske?

Eh, amma ana iya buƙatar farin tawada ko kuma wani ƙaramin laydi mai haske don hana launin substrate ya shafi zane.

Za a iya yin amfani da takardar PVC mai launi a yanayin zafi?

An amince da matakin injin ko matsin lamba bayan an gwada yanayin dumama, mold, zurfin zane da sanyaya.

Shin launi yana canzawa bayan thermoforming?

Miƙewa mai zurfi na iya rage kauri da kuma canza launin da ke bayyane, sheƙi ko rashin haske a wurare masu girman gaske. Ana ba da shawarar a gwada samarwa.

Za a iya amfani da takardar PVC ta CNC?

Eh. Yi amfani da kayan aiki masu kaifi, ƙimar ciyarwa mai dacewa, tallafin takardar da kuma cirewa da ta dace da injinan filastik.

Za a iya yanke takardar PVC ta laser?

Ba a ba da shawarar yankewa da sassaka na laser na yau da kullun ba saboda PVC na iya samar da iskar gas ko ƙura mai haɗari. Ana ba da shawarar yankewa na inji.

Shin takardar ba ta hana ruwa shiga ba?

PVC mai ƙarfi yana da ƙarancin shan ruwa kuma yana tsayayya da fallasa danshi na yau da kullun, amma cikakken tsarin da aka shigar ya dogara da haɗin gwiwa, manne, gefuna da rufewa.

Shin takardar sinadarai tana jure wa sinadarai?

PVC tana tsayayya da sinadarai da yawa, amma dole ne a duba daidaito don sanin ainihin sinadarai, yawansu, zafin jiki da lokacin fallasa su.

Za a iya amfani da PVC mai launi na yau da kullun don tankunan sinadarai?

Bai kamata a yi amfani da alamar gaba ɗaya ko alamar ado ta atomatik ga tankunan sinadarai ba. Ana buƙatar cikakken bita na PVC-U na masana'antu da injiniya.

Shin takardar PVC mai launi ba ta da wuta?

Bai kamata a bayyana shi a matsayin wanda ke da cikakken juriya ga wuta ba. Dole ne a sami goyon bayan rahoton gwaji don tabbatar da daidaiton inganci, launi da kauri.

Shin akwai maganin antistatic?

Ana iya kimanta tsarin antistatic bisa ga yanayin juriyar saman da ake buƙata, danshi, tsawon lokaci da aikace-aikacensa.

Shin takardar PVC ta dace da marufin abinci?

Bai kamata a yi amfani da takardar UV mai launi ta atomatik don hulɗa da abinci ba. Ana buƙatar takamaiman tsari da takaddun kasuwa da za a yi amfani da su.

Za a iya amfani da PVC mai launi don kayayyakin likita?

Amfani da magani yana buƙatar ingantaccen matsayi da kuma tabbatar da ingancin kayan aiki, tsafta, bin diddiginsu da kuma buƙatun kayayyakin da aka gama.

Shin akwai fim ɗin kariya?

Za a iya tattauna fim ɗin kariya na gefe ɗaya ko na gefe biyu don takamaiman takamaiman takaddun sheki.

Menene mafi ƙarancin adadin oda?

Launuka da ƙayyadaddun bayanai na yau da kullun galibi suna da MOQ na kimanin kilogiram 1000. Launuka na musamman ko samfuran UV na musamman na iya buƙatar kimanin kilogiram 3000.

Ana samun samfuran?

Za a iya samun zanen A4 da kuma zanen launi na yanzu. Samfuran UV ko launuka na musamman na iya buƙatar tsarin gwaji.

Menene lokacin samar da jagora?

Tsarin samarwa na yau da kullun yana buƙatar kimanin kwanaki 7-15 bayan an tabbatar da launi, tsari, ƙayyadaddun bayanai, samfurin, marufi da ajiya.

Wane bayani ake buƙata don yin ƙiyasin farashi?

Bayar da kauri, girma, launi, saman, amfani a cikin gida ko waje, gwajin UV, hanyar sarrafawa, ƙa'idodi na musamman, adadi, shiryawa da inda za a je.

Sami Takardar Zane Mai Launi Na Musamman Ta PVC

Game da Ƙungiyar Roba ta HSQY

HSQY Plastic Group tana samar da zanen PVC masu launi, zanen PVC masu haske, zanen PVC da za a iya bugawa, fina-finan PVC, zanen PET, zanen PP da kayan filastik na musamman ga abokan cinikin B2B na ƙasashen waje.

HSQY tana tallafawa masana'antun alamu, firintoci, kamfanonin nunin faifai, masu ƙera filastik, kamfanonin thermoforming, masu sarrafa masana'antu, masu shigo da kaya da masu rarrabawa tare da daidaita launi, gwajin samfura, samarwa na musamman, duba inganci da kuma shirya kayan fitarwa.

Nemi Ƙimar da Samfura