Kwamitin Kumfa Kyauta na PVC

Mai ƙera allon kumfa kyauta na PVC don bugawa, alamu da nunin faifai

Kamfanin HSQY PLASTIC yana kera kuma yana samar da allunan kumfa marasa PVC don bugawa ta dijital, buga allo, alamun shafi, nunin wurin siye, zane-zanen baje kolin kayayyaki, sanya hotuna, yin samfuri, kayan ado na ciki da kuma ƙera filastik gabaɗaya.

Allon kumfa mara PVC ce mai sauƙi takardar PVC wacce aka faɗaɗa ta amfani da tsarin fitar da kumfa kyauta. Tsarin tantanin halitta mai kyau yana rage nauyin allo yayin da yake samar da santsi mai dacewa da bugawa, yankewa, hanya, haƙa, laminating da ƙera.

Muhimmi: kalmar 'Allon kumfa mara PVC' ba yana nufin cewa allon ba shi da PVC ba. 'Kumfa mara kumfa' yana bayyana tsarin kumfa. Kayan da kansa polyvinyl chloride ne da aka yi da kumfa, ko PVC.

Tsarin samfurin allon kumfa na HSQY na yanzu ya ƙunshi kauri kusan 1-35 mm , ma'auni masu yawa da yawa, zanen gado na yau da kullun 4 × 8 ft / 1220 × 2440 mm da manyan tsare-tsaren zanen gado. Fari shine launin bugawa da aka fi amfani da shi, yayin da za a iya tattauna launuka baƙi, ja, rawaya, shuɗi, kore da na musamman.

Menene Allon Kumfa mara PVC?

Allon kumfa mara PVC wani takardar polyvinyl chloride ne mai ƙarfi wanda aka ƙera ta hanyar barin mahaɗin PVC ya faɗaɗa cikin 'yanci yayin fitar da iska kafin a sanyaya takardar kuma a daidaita ta.

Tsarin yana ƙirƙirar tsakiyar ƙwayar halitta mai sauƙi da kuma saman santsi. Idan aka kwatanta da takardar PVC mai ƙarfi, PVC mai kumfa mai kyauta yana amfani da tsarin ciki mai kumfa don rage yawan yawa da nauyi yayin da yake riƙe da amfani da ƙarfi da aikin ƙera.

Ana kuma kiran kayan da takardar PVC da aka faɗaɗa, takardar kumfa ta PVC, allon PVC mai kumfa, allon alamar PVC ko takardar PVC mai kumfa kyauta..

Shin 'Allon Kumfa Mai Kyau na PVC' Yana Nufin Babu PVC?

A'a. Wannan muhimmin bambanci ne tsakanin kalmomi.

Kalma	Ma'anar
Kwamitin Kumfa Kyauta na PVC	An ƙera allon PVC ta amfani da tsarin fitar da kumfa kyauta
Takardar PVC ta Kumfa Kyauta	Wata hanya ta bayyana irin wannan dangin kayan PVC masu kumfa kyauta
Allon da Ba Ya Da PVC	Allon da aka ƙera musamman ba tare da polyvinyl chloride ba; wannan nau'in kayan daban ne

Idan aikinku yana buƙatar takamaiman abin da ba shi da chlorine ko kuma wanda ba shi da PVC, ku faɗi wannan buƙatar daban lokacin da kuke neman kayan.

Bayanin PVC Free Kumfa Board

Samfuri	Kwamitin Kumfa Mai Kyauta na PVC / Takardar PVC Mai Faɗaɗa
Kayan Aiki	Faɗaɗa tauri mai ƙarfi na polyvinyl chloride
Kauri na Iyali - Samfurin Yanzu	Kimanin 1-35 mm ya danganta da matsayi da aikace-aikacen
Kauri Masu Kyau Na Musamman	3 mm, 5 mm, 12 mm, 15 mm da 18 mm sun zama ruwan dare a cikin kewayon allon kumfa na PVC na HSQY.
Nisan Yawa	Kimanin 0.35–1.0 g/cm³ a ​​cikin dangin samfurin allon kumfa na PVC da aka haɗa; tabbatar da ƙimar kumfa kyauta ta ƙayyadaddun bayanai
Girman Takardar Daidaitacce	1220 × 2440 mm / kimanin ƙafa 4 × 8
Ƙarin Girman Yanzu	915 × 1830 mm, 1560 × 3050 mm da 2050 × 3050 mm
Girman Musamman	Faɗin musamman, tsayi da girman yankewa ya dogara da yuwuwar samarwa
Launi na Daidaitacce	Fari
Launuka na Musamman	Baƙi, ja, rawaya, shuɗi, kore da launuka na musamman waɗanda suka dogara da ƙayyadaddun tsari da oda
saman	Kammala mai santsi, matte, satin ko takamaiman aikace-aikace bisa ga matsayi
Sarrafawa	Bugawa ta dijital, buga allo, yankewa, hanyar CNC, haƙa, hudawa, yanke mutu, yankan yashi, fenti, laminating da haɗin kai
Babban Aikace-aikace	Alamomi, nunin POP, allunan baje koli, hawa hotuna, yin samfuri, bugawa, ado da ƙera gabaɗaya

Yawan Allon Kumfa Mai Kyau na PVC: Me Ya Kamata Masu Saye Su Bayyana?

Nauyin yana ɗaya daga cikin mahimman sigogin siye don faɗaɗa allon PVC.

Allon kumfa guda biyu na PVC masu girma da kauri iri ɗaya na iya samun nauyi daban-daban, tauri, halayen injina da aikin saman idan yawansu ya bambanta.

Alkiblar Yawansu	Gabaɗaya La'akari da Zaɓin Gabaɗaya
Allon Kumfa Mai Ƙaramin Yawa	Ƙananan nauyin allo da sauƙin sarrafawa; sau da yawa ana la'akari da su don bugawa da nunin faifai masu sauƙi
Allon Kumfa Mai Matsakaici Mai Yawa	Daidaiton nauyi, tauri, ingancin saman da aikin ƙira
Allon Kumfa Mai Girma Mai Yawa	Nauyi mafi girma da yuwuwar inganta taurin kai, kwanciyar hankali na injin da aikin ɗaurewa ya danganta da matakin

Maimakon neman allon kumfa na PVC mai girman 5 mm kawai, masu siyan kaya na kasuwanci ya kamata su ƙayyade kauri, yawa, nauyin takardar ko amfani da shi.

Kwamitin Kumfa Kyauta na PVC don Buga Dijital

Bugawa da kuma sanya alama manyan aikace-aikace ne ga takardar kumfa mara PVC saboda matakin da ya dace yana samar da wuri mai faɗi da santsi tare da ƙarancin nauyin allo.

Ana amfani da allon kumfa na PVC mai farin fenti don zane-zanen dijital kai tsaye saboda hasken baya yana goyan bayan hotunan da aka buga masu bambanci sosai.

Masu siyan buga takardu ya kamata su samar da nau'in firinta, tsarin tawada, kauri na allo, kammala saman da kuma ko ana buƙatar bugawa mai gefe ɗaya ko mai gefe biyu.

Ayyukan zane masu mahimmanci ya kamata su amince da samfurin samarwa ta amfani da firinta da tawada na gaske kafin babban oda.

PVC Kumfa Board don Buga Allo

Haka kuma za a iya amfani da takardar kumfa mara PVC a matsayin madadin buga allo don alamu, allunan talla, zane-zanen alkibla da allunan talla.

Ya kamata a gwada mannewar tawada, yanayin bushewa da kuma dacewa da sinadarai ta amfani da tsarin saman da tawada da aka zaɓa.

Allon Kumfa Kyauta na PVC don Alamomi da Talla

Aikace-aikacen alamun da aka saba amfani da su sun haɗa da alamun dillalai, allunan menu, allunan talla, alamun gidaje, zane-zanen baje kolin, alamun alkibla, nunin nunin kasuwanci da kayan da ake sayarwa.

Ya kamata a zaɓi kauri na allo bisa ga girman alamun da aka gama, hanyar hawa, ƙarfin da ake tsammani, fallasa iska da kuma ko alamar an yi ta da firam ko ba a tallafa mata ba.

Allon Kumfa Kyauta na PVC don Nunin POP da Nunin Nunin Nuni

Allon kumfa mai sauƙi wanda ba shi da PVC yana da amfani ga nunin dillalai na ɗan lokaci da na dindindin domin yana iya haɗa bugawa kai tsaye da ƙera injina.

Ana iya yanke shi zuwa siffofi na musamman don nunin tebur, zane-zanen nunin faifai, allunan kanun labarai, allunan nunin samfura, haruffan girma da shigarwar talla.

Kwamitin Kumfa Kyauta na PVC don Haɗa Hoto da Yin Samfuri

Haɗin ƙananan nauyi, tauri da sauƙin yankewa yana sa takardar kumfa mara PVC ta zama mai amfani don ɗaukar hoto, samfuran gine-gine, samfura, zane-zane da allon gabatarwa.

Ya kamata a duba dacewa da manne kafin a ɗora zane-zane masu mahimmanci domin aikin haɗin ya dogara ne akan sinadaran manne da saman allo.

Allon Kumfa Kyauta na PVC vs. Allon Kumfa Celuka na PVC

Allon	PVC	Kumfa Kyauta na
Tsarin aiki	Fitar kumfa kyauta	Tsarin fitar da iskar Celuka
Harafin Fuskar	Sufuri mai santsi tare da tsarin ƙwayoyin halitta mai sauƙi	Fatar waje mai tauri da ke kewaye da tsakiyar kumfa
Ƙarfin Al'ada	An inganta shi don aikace-aikacen bugawa da nuni mai sauƙi	Sau da yawa ana zaɓa shi lokacin da babban taurin saman da kuma taurin ƙira suka zama fifiko
Aikace-aikace na yau da kullun	Bugawa, alamun hoto, nune-nunen da kuma nunin POP	Kabad, kayan daki, sassan bango da kayan da aka ƙera masu nauyi

Don samun kayan daki masu launin fata mai tauri da kuma matakan ƙera su, duba mu        Allon Kumfa na PVC Celuka.

Allon Kumfa Mai Kyauta na PVC vs. Allon Kumfa Mai Haɗin Kai na PVC

Bayani Allon	Kumfa Mai	Haɗin Kai na Kumfa Kyauta
Tsarin gini	Tsarin PVC mai kumfa wanda aka samar ta hanyar faɗaɗawa kyauta	Tushen kumfa mai kauri tare da yadudduka masu kauri na saman da aka fitar tare da fitarwa
Fifikon Fuskar	Bugawa da ƙera gabaɗaya	Taurin saman sama, bayyanarsa da kuma ƙera abubuwa masu wahala
Amfani gama gari	Alamomi da nuni	Kayan daki, kabad, nunin kayan ado na musamman da aikace-aikacen ado

Don faifan kumfa masu launuka da yawa waɗanda ke da fata mai kauri, duba mu        Allon Kumfa na PVC Co-Extrusion.

Allon Kumfa Mai Kyauta na PVC da Allon Kumfa Mai Laminated na PVC

Allon PVC mai kumfa na yau da kullun yana amfani da saman kumfa na PVC da aka fallasa a matsayin fuskar da aka gama. Allon kumfa na PVC mai laminated yana ƙara kayan ado ko kariya a saman allon kumfa.

Allunan laminated galibi ana la'akari da su inda kayan daki, kabad ko kayan ado na ciki ke buƙatar ƙwayar itace, kamannin marmara, fim ɗin ado ko wani saman da aka gama.

Don kayan ado da aka gama, duba mu        Allon Kumfa Mai Laminated PVC.

Allon Kumfa Mai Kyauta na PVC vs. Takardar Takardar PVC

Mai Kyau	Allon Kumfa Mai Kyauta na PVC	Takardar Takardar PVC Mai Kyau
Tsarin Ciki	Wayar salula / kumfa	Tsarin da ba shi da kumfa mai ƙarfi
Yawan yawa	Ƙasa saboda tsarin kumfa	Mafi girma
Babban Fifikon Zaɓe	Allo mai sauƙi, bugawa da kuma ƙera nuni	Tsarin tsari mai ƙarfi da aikin PVC mai tsauri na musamman-takamaiman aikace-aikace

Allon Kumfa Kyauta na PVC vs. PP Allon Kumfa Kyauta na

PP	PVC	Allon Kumfa Kyauta na
Tsarin gini	Kumfa mai laushi na salula	Takardar busasshiyar rami
saman	Santsi kuma ya dace da aikace-aikacen zane-zane na Premium	Tsarin da aka yi da fluted zai iya ƙirƙirar wani yanayi daban
Tauri	Allon mai tauri	Takarda mai sauƙi tare da lanƙwasawa da naɗewa daban-daban
Amfani na yau da kullun	Alamomi, nunin POP, nune-nunen da kuma allunan da aka buga	Marufi, kariyar wucin gadi, akwatuna da alamun wucin gadi masu rahusa

Yadda Ake Zaɓar Allon Kumfa na PVC Kauri Kauri

Jagorar	Zaɓin Al'ada
1–3 mm	Zane-zane masu sauƙi, hawa, ƙananan alamu da siraran kayan nuni
3–5 mm	Alamomi na gaba ɗaya, allunan nuni, nunin faifai da allunan bugawa
5–10 mm	Manyan nuni, zane-zane masu girma, allunan da aka ƙera da aikace-aikace waɗanda ke buƙatar ƙarin tauri
12–18 mm	Abubuwan da aka ƙera masu nauyi, sassan da suka shafi kayan daki da kuma bangarori inda ake buƙatar ƙarin kauri
Sama da 18 mm	Ƙirƙirar takamaiman aiki; tabbatar ko kumfa kyauta, Celuka ko wani ginin kumfa na PVC ya fi dacewa

Kauri kaɗai ba ya ƙayyade tauri. Ya kamata a yi la'akari da girman allo, yawansa, tsarin kumfa, tazarar tallafi da yanayin hawa.

Allon Kumfa Kyauta na PVC 4 × 8

1220 × 2440 mm , wanda aka fi sani da kusan ƙafa 4 × 8 , yana ɗaya daga cikin tsarin allon kumfa na PVC na yau da kullun a cikin kewayon HSQY.

Wannan tsari ya dace sosai da bugu, hanyar CNC, alamun aiki da kuma tsarin ƙira takardu.

Manyan tsare-tsaren takarda kamar 1560 × 3050 mm da 2050 × 3050 mm suma na iya rage haɗin gwiwa da kuma inganta yawan kayan da ake samarwa a cikin manyan zane-zane ko allunan da aka ƙera.

Farar PVC Free Kumfa Board

Fari shine launin allon kumfa da aka fi amfani da shi don bugawa, sanya alama da kuma nuna kayan aiki.

Masu siyan buga littattafai na kasuwanci ya kamata su yi la'akari da fari, daidaiton saman, lanƙwasa, yawa, haƙurin kauri da kuma dacewa da tawada maimakon launi kawai.

Allon Kumfa Mai Launi Mai Kyau na PVC

Ana iya la'akari da launuka baƙi, ja, rawaya, shuɗi, kore da na musamman don nunin faifai, haruffan girma, allunan ado da aikace-aikacen alama.

Samuwar launi na iya dogara ne akan kauri na allo, yawan aiki, yawan samarwa da kuma kammala saman da ake buƙata.

Yankan da CNC na Tsarin Kumfa Kyauta na PVC

Ana iya ƙera takardar kumfa ta PVC ta amfani da saws, na'urorin CNC, injinan haƙa da sauran kayan aikin filastik ko na katako masu dacewa.

Ayyukan ƙera kayayyaki na yau da kullun sun haɗa da:

• Yanke yanke

• Tsarin CNC

• Hakowa

• Naushe

• Yanke mutu don ma'auni masu dacewa

• Zane-zane

• Sanding

• Maƙallin injina

• Haɗawa da tsarin manne masu jituwa

• Laminating

Shin Za a Iya Yanke Allon Kumfa Mai Kyauta na PVC?

Bai kamata a ɗauki yanke laser na al'ada a matsayin hanyar ƙera PVC ta asali ba.

Tsarin dumama PVC na iya haifar da hayaki mai lalata da haɗari, kuma waɗannan hayakin na iya lalata kayan aikin laser marasa dacewa.

Hanyar CNC, yanke yanke ko wasu hanyoyin injiniya da aka amince da su gabaɗaya sun fi dacewa sai dai idan an tsara kayan aiki na musamman da tsarin cirewa musamman don sarrafa PVC.

Takardar Kumfa Mai Kyau da Laminating PVC

Ana iya haɗa allon kumfa mara PVC ko kuma a yi masa laminate ta amfani da manne, kaset da fina-finai masu dacewa.

Zaɓin manne ya kamata ya yi la'akari da saman allo, kayan da aka haɗa, zafin jiki, danshi, nauyin da ake tsammani da kuma ko za a yi amfani da samfurin a ciki ko a waje.

Gwada ƙarfin haɗin gwiwa ta amfani da kayan samarwa kafin ƙera manyan kayan da aka yi wa laminated.

Juriyar Danshi da Amfani da Waje

PVC mai faɗaɗa yana da ƙarancin shan danshi kuma baya yin kama da allon takarda mara magani ko itacen halitta idan aka fallasa shi ga danshi.

Duk da haka, ya kamata a kimanta dacewa da waje bisa ga ainihin matakin allo, launi, fallasa UV, zagayowar zafin jiki, tsarin hawa, nauyin iska da kuma lokacin da ake tsammanin sabis.

Kada ka ɗauka cewa kowane nau'in allon kumfa na PVC yana da irin wannan aikin UV na dogon lokaci ko na waje.

Aikin Wuta na Allon Kumfa na PVC

Halin wuta ya dogara ne akan tsarin PVC, yawansa, kauri da kuma hanyar gwaji.

Kada a yi amfani da nau'in rarraba wuta daga samfurin allon kumfa ɗaya ko kauri zuwa ga dukkan nau'in.

Idan wani aikin da aka tsara yana buƙatar ASTM E84, EN 13501, UL 94, GB 8624 ko wani ƙa'idar wuta, a bayar da ainihin gwajin da ake buƙata da kuma rarrabuwa don a iya tabbatar da takaddun samfuran da suka dace.

Shin Allon Kumfa Mai Kyauta na PVC Yana Da Kyau ga Muhalli?

Bai kamata a tallata allon kumfa mara PVC a matsayin wanda ya fi kyau a muhalli kawai saboda kalmomin 'kumfa mara kumfa' sun bayyana a cikin sunansa.

Kayan har yanzu yana ɗauke da PVC. Ya kamata kimanta muhalli ya yi la'akari da tsari, ƙari, tsawon lokacin da aka yi amfani da shi, ingancin masana'antu, sake amfani da shi, hanyar sake amfani da shi, kayayyakin sharar gida da takamaiman buƙatun aikin.

Idan abokin ciniki yana buƙatar tsari mara gubar, abubuwan da aka sake yin amfani da su, RoHS, REACH ko wani buƙatar muhalli, ƙayyade ainihin ma'auni kuma tabbatar da takaddun da aka yi amfani da su don matakin da aka zaɓa.

Yadda Ake Zaɓar Allon Kumfa Mai Kyau na PVC

1. Bayyana Aikace-aikacen

A ƙayyade bugawa ta dijital, buga allo, alamun shafi, nunin nuni, ɗaura hoto, yin samfuri ko ƙera shi.

2. Tabbatar da Allunan Kumfa Kyauta, Celuka ko Allunan da aka haɗa

Kumfa mara ƙura ya dace musamman ga bugu da alamun sauƙi, yayin da ake iya la'akari da gine-ginen Celuka da waɗanda aka haɗa su waje idan ana buƙatar wurare masu tauri ko ƙera su da yawa.

3. Zaɓi Kauri

Kauri na allon tare da girman allon da aka gama da hanyar hawa.

4. Kayyade Yawan Kauri

Yawan danshi yana shafar nauyin allo, tauri da kuma ɗabi'ar ƙera shi, don haka ya kamata a haɗa shi cikin ƙayyadaddun tsari na maimaitawa.

5. Zaɓi Girman Takarda

Girman HSQY da aka saba amfani da shi sun haɗa da 915 × 1830 mm, 1220 × 2440 mm, 1560 × 3050 mm da 2050 × 3050 mm, tare da girman da aka keɓance dangane da yuwuwar samarwa.

6. Zaɓi Launi

Fari misali ne na aikace-aikacen bugawa da yawa. A ƙayyade launin baƙi, ja, rawaya, shuɗi, kore ko na musamman idan ana buƙata.

7. Bayyana Bukatun Fuskar

A ƙayyade matte, santsi, satin ko wani abin rufe fuska da ake buƙata, da kuma ko ana buƙatar kariya.

8. Bayyana Tsarin Bugawa

Bayar da fasahar firinta, nau'in tawada da kuma ko bugawa za ta kasance ta gefe ɗaya ko ta gefe biyu.

9. Bayyana Bukatun Ƙirƙira

A ƙayyade yankewa, hanyar CNC, haƙa rami, sassaka, huda rami, lamination, fenti ko haɗin kai.

10. Tabbatar da Amfani da shi a Cikin Gida ko Waje

Aikace-aikacen waje ya kamata su gano fallasar UV, zafin jiki, yanayin hawa da lokacin da ake buƙata na aiki.

11. Tabbatar da Bukatun Gobara ko Biyayya

Bayar da ainihin buƙatun gwaji ko bin ƙa'idodin bin ƙa'idodin kasuwa maimakon ɗaukar takardar shaida ɗaya ta shafi kowace hukumar gudanarwa.

12. Amince da Samfurin Samarwa

Duba kauri, yawa, nauyi, fari, saman, siffa, bugu da aikin ƙera kafin amincewa da odar kasuwanci ta musamman.

Manufacturing na Allon Kumfa na Musamman na PVC

HSQY tana tallafawa ayyukan allon PVC na musamman da aka faɗaɗa don masana'antun alamun shafi, kamfanonin bugawa, 'yan kwangilar baje kolin kayayyaki, masana'antun nunin kayayyaki, masu rarraba filastik da masu ƙera kayayyaki.

Bukatun musamman na iya haɗawa da:

• Kauri na musamman

• Yawan al'ada na musamman

• Takardun zanen gado 4 × 8 ƙafa / 1220 × 2440 mm

• Manyan takardu masu tsari

• Girman yanke na musamman

• Farar allon kumfa na PVC

• Baƙin allon kumfa na PVC

• Allon ja, rawaya, shuɗi da kore

• Launuka na musamman

• Matte surface

• Sufuri mai santsi ko na satin

• Abin rufe fuska na kariya don aikace-aikacen da aka zaɓa

• Maki na bugun dijital

• Maki na bugun allo

• Tsarin CNC

• Sarrafa-yanke-yanke

• Hakowa da sassaka

• Bukatun lamination

• Marufi na fitarwa na musamman

Kula da Inganci don Kwamitin Kumfa Mai Kyauta na PVC

• Kauri da haƙurin kauri na allo

• Juriyar Faɗi da Tsawon

• Yawan yawa

• Nauyin takardar

• Daidaiton ƙwayoyin kumfa

• Daidaiton allo

• Santsi a saman

• Daidaiton fari ko launi inda aka ƙayyade

• Lalacewar saman

• Aikin bugawa inda ake buƙata

• Ingancin gefen CNC inda ake buƙata

• Bukatun tasiri ko na inji inda aka ƙayyade

• Sha ruwa inda aka ƙayyade

• Gwajin wuta inda ake buƙata

• Yanayin fim mai kariya

• Marufi da yanayin pallet

Shiryawa da jigilar kaya na ƙasashen waje

Allon kumfa na PVC suna da sauƙin nauyi idan aka kwatanta da girmansu, amma manyan allunan suna buƙatar kariya mai dacewa daga saman da gefen yayin jigilar su.

Ana iya tattauna marufi ta amfani da fim ɗin kariya, naɗe PE, kwali, kariyar gefuna da kuma shirya fakitin fitarwa bisa ga girman allo da buƙatun saman.

Masu siye ya kamata su kwatanta yawan amfanin takardar da ake amfani da shi da kuma ingancin loda kwantena lokacin zabar tsakanin girman allo na yau da kullun da na musamman.

Me Yasa Za Ka Zabi HSQY Don Allon Kumfa Marasa PVC?

Fasahohin Kumfa na PVC da yawa: HSQY yana samar da samfuran allon kumfa kyauta, Celuka, waɗanda aka haɗa da kuma waɗanda aka laminated don buƙatun bugawa, kayan daki da ƙera daban-daban.

Kauri da yawa: Kayayyakin allon kumfa na PVC da aka haɗa a halin yanzu suna rufe kusan 1-35 mm dangane da tsarin samfurin da aikace-aikacensa.

Zaɓin Yawan Nauyi: Ana iya tattauna buƙatun masu sauƙi, matsakaici da kuma masu yawa bisa ga aikin da aka gama.

Tsarin Daidaitacce da Manyan Tsaruka: Girman da ake da su a yanzu sun haɗa da 915 × 1830 mm, 1220 × 2440 mm, 1560 × 3050 mm da 2050 × 3050 mm.

Aikace-aikacen Bugawa: Ana iya zaɓar PVC mai kumfa kyauta don bugawa ta dijital, buga allo, sanya alama da aikace-aikacen nuni.

Zaɓuɓɓukan Ƙirƙira: Za a iya tattauna buƙatun yankewa, hanyar CNC, haƙa rami, sassaka da sauran buƙatun sarrafawa bisa ga zane-zane.

Fayil ɗin Allon Kumfa na PVC Mai Faɗi: Masu siye kuma za su iya kwatantawa        PVC Celuka Kumfa Board,        Allon Kumfa Mai Haɗawa na PVC        da kuma        PVC Laminated Kumfa Board.

Ana Bukatar Bayanin da Za a Yi Don Samun Takardar Kumfa Mai Kyau Daga PVC

Aikace-aikace	Buga dijital, alamun hoto, nuni, nunin faifai, yin samfuri, kayan daki ko ƙera kayayyaki
Nau'in Kumfa	Ana buƙatar kumfa kyauta, Celuka, an haɗa shi da juna ko kuma an ba da shawara
Kauri	Kauri da haƙuri da ake buƙata
Yawan yawa	Yawan da ake buƙata a cikin g/cm³ ko nauyin allon da aka nufa
Girman takardar	915 × 1830 mm, 1220 × 2440 mm, 1560 × 3050 mm, 2050 × 3050 mm ko kuma aka yi musamman
Launi	Fari, baƙi, ja, rawaya, shuɗi, kore ko launi na musamman
saman	Matte, santsi, satin ko wani saman da ake buƙata
Bugawa	Fitar da allo ta dijital, UV, ko wasu hanyoyin aiki, kamar vinyl ko wasu hanyoyin aiki.
Ƙirƙira	Yankan, hanyar CNC, hakowa, sassaka, haɗawa ko lamination
Muhalli	Amfani a cikin gida ko waje da lokacin da ake tsammani na fallasawa
Bin ƙa'ida	Wutar da ake buƙata, RoHS, REACH ko wani ma'auni na musamman na aikin
Adadi	Umarnin gwaji, adadin oda na yau da kullun da kuma ƙimar buƙata ta shekara-shekara
Inda za a je	Ƙasar da ake nufi da tashar jiragen ruwa

Tambayoyin da ake yawan yi game da allon kumfa kyauta na PVC

Menene allon kumfa mara PVC?

Allon kumfa mara PVC wani faffadan takarda ne na polyvinyl chloride wanda aka ƙera ta amfani da tsarin fitar da kumfa kyauta. Yana da tsarin ƙwayoyin halitta mai sauƙi da kuma santsi.

Shin allon kumfa mara PVC yana ɗauke da PVC?

Eh. 'Kumfa kyauta' yana nufin tsarin kera kumfa kyauta. Ba yana nufin cewa samfurin ba shi da polyvinyl chloride ba.

Shin allon kumfa mara PVC iri ɗaya ne da allon da ba shi da PVC?

A'a. Allon kumfa mara PVC har yanzu kayan PVC ne. Allon da ba shi da PVC yana nufin kayan da aka ƙera ba tare da PVC ba.

Shin allon kumfa mara PVC iri ɗaya ne da allon PVC da aka faɗaɗa?

PVC mai kumfa kyauta wani ɓangare ne na dangin takardar PVC da aka faɗaɗa. PVC mai faɗaɗa kalma ce mai faɗi wacce za ta iya haɗawa da tsarin kera allon kumfa daban-daban.

Menene bambanci tsakanin kumfa kyauta da kuma PVC na Celuka?

Kumfa mai 'free kumfa' yana amfani da faɗaɗawa kyauta don ƙirƙirar takardar tantanin halitta mai sauƙi, yayin da sarrafa Celuka ke samar da fata mai tauri a waje a kusa da tsakiyar kumfa. Kumfa mai 'free kumfa' yawanci ana zaɓar shi don bugawa da nunawa, yayin da ake la'akari da Celuka don kabad da ƙera abubuwa masu nauyi.

Mene ne bambanci tsakanin kumfa kyauta da allon kumfa na PVC da aka haɗa?

Kumfa mai 'yanci yana amfani da tsarin PVC mai kumfa, yayin da allon da aka haɗa suna amfani da tsakiyar kumfa tare da yadudduka masu kauri da aka haɗa da juna.

Wane irin kauri HSQY ke bayarwa?

Samfuran allon kumfa na PVC na HSQY da aka haɗa a halin yanzu sun kai kimanin mm 1-35. Ya kamata a tabbatar da kewayon da ake da shi don takamaiman yawan kumfa da girman takardar kafin yin oda.

Shin HSQY yana samar da allon kumfa na PVC 4 × 8?

Eh. 1220 × 2440 mm, kimanin ƙafa 4 × 8, tsari ne na yau da kullun a cikin kewayon allon kumfa na PVC na HSQY na yanzu.

Wadanne sauran girman allon kumfa na PVC ake samu?

Kayayyakin HSQY na yanzu sun haɗa da tsarin 915 × 1830 mm, 1560 × 3050 mm da 2050 × 3050 mm, tare da girma dabam dabam da ake da su don ayyukan da suka dace.

Wane allon kumfa mai yawa na PVC ya kamata in saya?

Yawan da ya dace ya dogara ne da kauri na allo, girman da aka gama, bugu, injin CNC, buƙatun mannewa da kuma taurin da ake buƙata. A haɗa da yawa a cikin RFQ duk lokacin da zai yiwu.

Za a iya buga allon kumfa mara PVC ta hanyar dijital?

Eh. Bugawa da sanya alama manyan amfani ne na PVC mai kumfa kyauta. Ya kamata a gwada dacewa da tawada tare da tsarin da aka zaɓa na allon da tsarin bugawa.

Za a iya buga allon kumfa kyauta na PVC?

Eh. Ana iya amfani da saman kumfa mai santsi na PVC don amfani da shi wajen buga allo bayan an tabbatar da daidaiton tawada.

Za a iya buga bangarorin biyu na allon kumfa na PVC?

Ana iya kimanta ma'aunin da ya dace da ma'auni biyu masu santsi don bugawa mai gefe biyu. A ƙayyade wannan buƙatar kafin a samar da ita.

Za a iya amfani da allon kumfa na CNC ba tare da PVC ba?

Eh. Ana iya amfani da allon kumfa na PVC wajen zana shi ta hanyar CNC ta amfani da kayan aiki masu dacewa, ƙimar ciyarwa da sigogin yankewa.

Za a iya haƙa allon kumfa na PVC?

Eh. Ana iya haƙa ma'aunin kumfa na PVC masu dacewa kuma a ɗaure su ta hanyar injiniya. Aikin ɗaurewa ya dogara da yawan allo, kauri da nisan gefen.

Za a iya manne allon kumfa na PVC?

Eh. Yi amfani da tsarin manne wanda aka tabbatar yana dacewa da PVC da kuma substrate na biyu da aka haɗa.

Za a iya fentin allon kumfa mara PVC?

Ana iya fentin allon kumfa na PVC mai dacewa bayan an tabbatar da daidaiton shirya saman da kuma daidaiton shafi.

Za a iya yanke allon kumfa na PVC ta hanyar laser?

Ba a ba da shawarar yanke laser na al'ada a matsayin tsari na asali ga PVC ba saboda dumama PVC na iya haifar da hayaki mai lalata da haɗari. Yanke injina ko hanyar CNC gabaɗaya ya fi dacewa sai dai idan an yi amfani da kayan aiki na musamman masu ƙarfin PVC.

Shin allon kumfa mara PVC ba ya hana ruwa shiga?

Faɗaɗa PVC ɗin yana da ƙarancin shan ruwa da juriya ga danshi. Ya kamata a yi la'akari da kayan da aka gama a waje, haɗe-haɗe, gefuna da aka fallasa da kuma tsarin tsarin gabaɗaya.

Za a iya amfani da allon kumfa mara PVC a waje?

Ana iya amfani da maki masu dacewa don alamun waje da nunin faifai, amma dacewa ta dogon lokaci ya dogara da fallasa UV, launi, matsayi, shigarwa da tsawon lokacin sabis da ake tsammani.

Shin allon kumfa mara PVC yana hana wuta?

Kada a bayyana dukkan nau'in a matsayin wanda ba ya iya kashe wuta gaba ɗaya. Aikinsa ya dogara ne da tsari, yawansa, kauri da kuma ma'aunin gwajin da ya dace.

Shin allon kumfa mara PVC yana da kyau ga muhalli?

Kalmar 'kumfa mara kumfa' kalma ce ta masana'anta kuma ba tana nufin kayan ba ya ɗauke da PVC ba. Ya kamata a tallafa wa da'awar muhalli ta hanyar tsari na musamman, takardun bin ƙa'idodi da yanayin ƙarshen rayuwa.

Wadanne launuka ne ake samu?

Fari shine launin da aka saba amfani da shi. Ana iya tattauna launukan baƙi, ja, rawaya, shuɗi, kore da na musamman bisa ga ƙa'idodin allo.

Shin HSQY zai iya yanke allon kumfa na PVC zuwa girmansa?

Ana iya tattauna girman takardar da aka keɓance da buƙatun yanke-zuwa-girma bisa ga kauri, yawa, haƙuri da yawa.

Zan iya neman samfuran allon kumfa na PVC?

Ana iya tattauna samfuran da ake da su don kimanta yawansu, kauri, saman, fari, bugu da aikin injina kafin samar da kayayyaki na kasuwanci.

Wane bayani zan aika don yin ƙiyasin farashi?

Samar da aikace-aikace, nau'in allon kumfa, kauri, yawa, girman takarda, launi, saman, tsarin bugawa ko ƙera shi, adadi da inda za a je.

Nemi Takardar Kumfa Mai Kyau ta PVC

Kuna neman mai samar da takardar , PVC mai inganci wanda ba shi da kumfa ko kuma allon kumfa na PVC da za a iya bugawa musamman don alamun shafi, talla, nunin faifai da ƙera su?

Aika HSQY da kauri, yawa, girman takardar, launi, hanyar bugawa da kuma kiyasin adadin siyan da kake buƙata. Idan ba ka da tabbas ko kumfa kyauta, Celuka ko allon PVC mai fitarwa ya fi kyau don aikace-aikacenka, samar da amfani na ƙarshe, tauri da ake buƙata, hanyar saman da ƙera don a iya kimanta tsarin allon da ya dace.