PVC Amadede Gbalẽ kple UV Takpɔkpɔ

UV-Stabilized Amadede Sesẽ PVC Agbalẽvi

HSQY wɔa UV-si li ke amadede sesẽ PVC gbadzɛwo na gota kple xɔme dzesiwo, agbalẽtata, gli ƒe nutsyɔnu, atsyɔ̃ɖoɖo ƒe ʋuƒo, dzoxɔxɔ ƒe akpa siwo wowɔ, dɔwɔnuwo ƒe nutsyɔnu kple dɔwɔƒewo ƒe wɔwɔme.

Nusi wotsɔ wɔe nye PVC gbadzɛ sesẽ si me futukpɔ mele o si le amadede siwo me mekɔ o, siwo me kɔ eye wo me kɔ me. Amadede siwo woɖo ɖi la dometɔ aɖewoe nye ɣi, yibɔ, dzĩ, ɣi, amadede dzẽ kple blɔ, esime woate ŋu atsɔ amadede siwo wowɔ ɖe ɖoɖo nu asɔ kple wo nɔewo le kpɔɖeŋu ŋutɔŋutɔ, RAL ƒe nufiame, Pantone ƒe nufiame alo amadede ƒe dzidzenu si dzi woda asi ɖo nu.

Agbalẽvi ƒe titrime si wozãna ɖaa la tso abe 0.21mm va ɖo 6.5mm ene. PVC film kple agbalẽ siwo le tsɛ wu tso abe 0.06mm va ɖo 0.20mm hã ateŋu anɔ anyi le ewɔwɔ ƒe nɔnɔme, sesẽme, kekeme kple dɔwɔwɔ ƒe nudidiwo nu.

Agbalẽvi ƒe didime si wozãna ɖaa dometɔ aɖewoe nye 700 × 1000mm, 915 × 1830mm kple 1220 × 2440mm. Woate ŋu adzro agbalẽ ƒe lolome siwo wowɔ ɖe ɖoɖo nu, kakɛ siwo wotso kple agbalẽ xatsaxatsa ƒe nɔnɔmewo me le ewɔwɔ ƒe kekeme si ade 1280mm me.

Wotsɔa UV takpɔkpɔ naa to atike si wozãna koŋ si me nusiwo naa li ke, amadedewo kple nusiwo wotsɔ kpe ɖe eŋu siwo sɔ le. Gbedoxɔ me dɔwɔwɔ nɔ te ɖe amadede si nètia, eƒe titrime, yame ƒe nɔnɔme, eɖoɖo, ɣe ƒe keklẽ kple dɔwɔwɔ ƒe agbenɔƒe si wobia dzi.

Mele be woaɖɔ PVC si ƒe amadede sɔ le eɖokui si be esɔ na gota zazã tegbee, nuɖuɖu ƒe kadodo, atikewɔnuwo, atikewo ƒe tsigoewo, nusiwo tsia dzoxɔxɔ nu alo dzo ƒe hatsotso tɔxɛ aɖe o. Dɔbiagbalẽvi siawo bia be woaxɔ dzeside si dzi woda asi ɖo ɖe vovo kple dodokpɔ ŋuti nyatakaka siwo akpe ɖe wo ŋu.

Dzro nu bliboa me HSQY PVC amadede agbalẽvi ƒe hatsotso alo ŋkuléle ɖe eŋu kpee PVC-gbadzɛ sesẽwo ƒe nuwɔna.

Bia PVC ƒe Agbalẽvi ƒe Asixɔxɔ    Bia Amadede kple UV Kpɔɖeŋuwo

Amadede PVC Agbalẽvi Video

Kpɔ video si le ete be nàto HSQY ƒe amadede PVC agbalẽwo, ewɔwɔ ƒe nɔnɔmewo, wɔwɔ ƒe tiatia kple plastic-gbadzɛwo gbɔ kpɔnu siwo wowɔ ɖe ɖoɖo nu me.

PVC ƒe Agbalẽvi ƒe Nɔnɔmetata Siwo Le Amadedewo Me

Nukae Nye PVC-gbadzɛ si ƒe amadede le sesẽm si ƒe amadede nye UV-Stabilized?

PVC-gbadzɛ sesẽ si ƒe amadede nye UV-si li ke nye polyvinyl chloride-gbadzɛ sesẽ si wotsɔ amadede kple ultraviolet-nu siwo li ke be woatsɔ aɖe nusiwo ɣe ƒe keklẽ hena vɛ dzi akpɔtɔ.

Agbalẽa ate ŋu anye esi me mekɔ o, si me kɔ alo esi me kɔ eye woate ŋu awɔe le teƒe siwo le keklẽm, siwo ƒe amadede nye matte, siwo me tsikpe le, esiwo wotsɔ nuŋɔŋlɔwo ŋlɔ alo esiwo wowɔ ɖe ɖoɖo nu.

Nusi wotsɔ wɔe naa viɖenu sesẽ, atikewo ƒe tsitretsitsi, elektrikŋusẽ ƒe xɔxlɔ̃ kple wɔwɔ ƒe dɔwɔwɔ na dzesiwo, ɖeɖefiawo, dɔwɔnuwo ƒe akpawo kple dɔwɔƒewo ƒe dɔwɔwɔ tiatia.

UV ƒe liƒo ate ŋu ana amadede naɖiɖi blewu, wòazu ɣie, eƒe gowo nazu chalk, eƒe keklẽ kple ʋuʋudedi nabu, gake menaa PVC ƒe atike ɖesiaɖe si yame ƒe nɔnɔme mete ŋu nɔa te ɖe enu tegbee o.

Ele be woaɖo kpe gota gome dzedze dzi na amadede, amadede, titrime, UV package, yame ƒe nɔnɔme kple subɔsubɔɣi si woɖo be woawɔ.

UV-Stabilized Amadede PVC Agbalẽvi ƒe Nɔnɔmewo

Ele be nɔnɔme mamlɛawo nade dzesi atikewɔmɔnu ƒe hatsotso bliboa, eƒe titrime ƒe mɔɖeɖe ɖe nu ŋu, didimewo, amadede ƒe nufiame, keklẽ, anyigba, UV ƒe nudidi, yame ƒe nɔnɔme dodokpɔ, ewɔwɔ ƒe ɖoɖo kple esi woɖo be woaɖoe.

Sesẽ Sesẽ PVC Agbalẽvi vs. PVC Foam Board

Mele be nuƒlelawo atsɔ PVC gbadzɛ sesẽ kple PVC foam board asɔ kple wo nɔewo to eƒe titrime ɖeɖeko zazã me o. Sheet ƒe kpekpeme, density, stiffness, fastener retention kple fabrication nuwɔna to vovo.

Alesi Wodaa UV Takpɔkpɔ Kpɔ

Ele be woaɖe UV ƒe tsitretsitsi gɔme to dɔwɔwɔ ƒe taɖodzinu siwo woate ŋu adzidze me tsɔ wu be woagblɔ nya si tsi tre ɖe UV ŋu le mɔ gbadza nu.

Yame ƒe nɔnɔme ƒe tɔtrɔ kabakaba ƒe nyatakaka siwo bɔ dometɔ aɖewoe nye ASTM D4329, ASTM G154 kple ISO 4892-3. Ele be nyatakakaa nagblɔ akaɖi ƒe ƒomevi, keklẽŋusẽ, dzoxɔxɔ, tsi ƒe ƒoƒo alo tsi ƒe tsatsam kple ɣeyiɣi si katã wòxɔ.

Dodokpɔ kabakaba ɖea vi na nuwo tsɔtsɔ sɔ kple wo nɔewo gake mesɔ kple ƒe xexlẽme aɖe si woɖo ɖi le gota le yame ƒe nɔnɔme ɖesiaɖe me tẽ o.

Amadede Tiatia na Gbedoxɔme PVC Agbalẽviwo

Amadede ƒe atikewɔwɔ kpɔa ŋusẽ ɖe amadede ƒe liƒo, UV ƒe xɔxlɔ̃, dzoxɔxɔ ƒe ƒuƒoƒo kple eƒe dzedzeme ɣeyiɣi didi dzi.

Zi geɖe la, amadede ɣi kple keklẽ mexɔa ɣe ƒe dzoxɔxɔ boo o wu amadede viviwo. Agbalẽvi yibɔ, blɔ viviti, amadede dzẽ doviviti kple dzĩ dzẽ ate ŋu aɖo anyigba ƒe dzoxɔxɔ si lolo wu gbɔ le ɣe ƒe keklẽ tẽ me.

Dzoxɔxɔ si kɔ wu le agbalẽ dzi ate ŋu ana dzoxɔxɔ ƒe kekeɖenudɔwɔwɔ, tadedeagu, nuteɖeamedzi si le fastener kple didime ƒe ʋuʋu nadzi ɖe edzi.

Ele be gotadɔwo nagblɔ amadede, afisi woaɖoe ɖo, akpata ƒe didime, kpekpeɖeŋu ƒe dometsotso, do ƒe ʋuʋu, dzoxɔxɔ ƒe didime si wokpɔ mɔ na kple subɔsubɔɣi si woɖo be woawɔ.

Mele be woatsɔ yame ƒe nɔnɔme ƒe nɔnɔme si dona tso amadede ɖeka me asisi ɖe amadede alo vɔvɔli bubu ŋu le eɖokui si o.

Agbalẽtata Kple Dzesiwo Ƒe Dɔwɔɖoɖowo

Woate ŋu azã PVC-gbadzɛ siwo ƒe amadede le gbadzaa na dzesi siwo wota, ɖeɖefia ƒe nɔnɔmetatawo, asitsaƒewo ƒe ɖeɖefiawo, mɔfiamedzesiwo kple boblododoɖakawo.

Ele be woado agbalẽtata kpɔ le anyigba ƒe akpa si tututu, amadede kple ewɔwɔ ƒe hatsotso dzi. Ate ŋu abia be woatsɔ nuŋlɔtsi ɣi alo primer layer si me mekɔ o nanɔ anyigba siwo do viviti ŋu.

Fabrication kple Thermoforming

• Zã saw blades ɖaɖɛwo, routers, milling tools kple drills siwo wowɔ na plastic sheet.

• Do alɔ agbalẽa le mɔ̃a zazã me be wòaɖe ʋuʋudedi, ʋuʋudedi kple nugbɔ ƒe gbegblẽ dzi akpɔtɔ.

• Ðe mɔ na teƒe si sɔ ƒo xlã do siwo wotsɔ ɖoa ​​gota hena dzoxɔxɔ ƒe kekeɖenudɔwɔwɔ.

• Ƒo asa na nusiwo wotsɔ blaa nu ŋu fũ akpa, vevietɔ le gotagome ʋuƒo gãwo dzi.

• Zã dzoxɔxɔ kple aŋɔ ƒe nɔnɔme siwo sɔ hena yaƒoƒo alo nyaƒoɖeamenu wɔwɔ.

• Kpɔe ɖa be amadede kple keklẽ ƒe léle ɖe te le dzoxɔxɔ ƒe nɔnɔme wɔwɔ vɔ megbe.

• Zã PVC-siwo sɔ kple welding rods, adhesives kple solvent cements.

• Do atike si wotsɔna léa nu ɖe ​​nu ŋu la kpɔ le amadede, eƒe gogloƒe kple UV ƒe wɔwɔme tututu dzi.

• Na ya naƒo le dzoxɔxɔ, welding kple dzoxɔxɔ wɔwɔ me.

• Mègazã laser lãɖeɖe alo laser ƒe nɔnɔmetata dzrowo na PVC o.

Nuwɔwɔ ƒe Dɔwɔna

HSQY zãa extrusion alo calendaring le titrime, kekeme, anyigba kple nusi wowɔ ƒe nɔnɔme si wotia nu.

Nusiwo Wozãna Kple Amadedewo ƒe Tɔtɔ

Wodaa PVC resin, stabilizers, pigments, processing aids, impact modifiers kple application-specific UV additives hetsaka wo le atike si dzi woda asi ɖo nu.

Extrusion alo Ɣletigbalẽwo wɔwɔ

Wotrɔa asi le atike la ŋu wòzua agbalẽ alo film to dzoxɔxɔ, nyaƒoɖeamenu, ka ƒe duƒuƒu kple ʋuʋudedi ƒe nɔnɔme siwo dzi wokpɔna zazã me.

Anyigba ƒe Nuwuwu

Woate ŋu awɔ eƒe gowo wòakɔ, awɔ matte-finished, frosted alo embossed le adzɔnu ƒe dzidzenu si dzi woda asi ɖo nu.

Fafa Kple Agbɔsɔsɔme Dzi Kpɔkpɔ

Fafa si dzi wokpɔna kpena ɖe ame ŋu be wòalé titrime ƒe ɖekawɔwɔ, gbadzaa, kekeme kple didime ƒe liƒo me ɖe asi.

Lãɖeɖe, Ʋuʋu kple Dzodzro

Wolãa atike la wòzua agbalẽwo alo ƒoa abi ɖe agbalẽ xatsaxatsawo me, léa ŋku ɖe eŋu heblanɛ ɖe nudɔdɔ ƒe ɖoɖo si dzi woda asi ɖo nu.

PVC-gbadzɛ siwo ƒe amadede le sesẽm la zazã

• Dzesi siwo le gota: Mɔfiamedzesiwo, dedienɔnɔ ƒe dzesiwo kple nyatakakadzraɖoƒe siwo zãa UV-stable grade si ŋu woda asi ɖo.

• Boblododo le xɔ me: Tabla siwo wota, boblododo ƒe dzesiwo kple ɖeɖefia ƒe nɔnɔmetatawo.

• Asitsaƒewo ƒe ɖeɖefiawo: POP ɖeɖefiawo, adzɔnuwo ƒe nudzraɖoƒewo, agbalẽdzraɖoƒe ƒe akpawo kple nusiwo wotsɔ ŋkɔ na.

• Ememe nutsyɔnu: Atsyɔ̃ɖoɖo gli ƒe akpawo, mamawo kple anyigba ƒe akpa siwo wodo alɔe.

• Thermoformed components: Nutsyɔnu siwo wowɔ, xɔwo, agbawo kple nusiwo woɖena fiana.

• Dɔwɔƒewo ƒe wɔwɔme: Dɔwɔnuwo ƒe akpawo, dzɔlawo, liners kple plastic components siwo wowɔ.

• Atikewɔnuwo: Wotia tsigoewo, ducts kple liners to dɔwɔƒewo ƒe grade si dzi woda asi ɖo kple atikewo ƒe tsitretsitsi ƒe dodokpɔ zazã me.

• Elektrikŋusẽ zazã: Nusiwo wotsɔ xea mɔ na dzoxɔxɔ ƒe akpawo kple woƒe akpa aɖewo le elektrikŋusẽ kple dzo ƒe nudidiwo nu.

• Templates kple patterns: Templates siwo le amadede vovovowo me siwo nɔa anyi didina, mɔfianu siwo wotsɔ lãa nu kple kpeɖeŋutɔ siwo wotsɔ wɔa woe.

Dɔwɔƒewo Kple Atikewo Zazã

Wozãa PVC sesẽ le atikewo ƒe dɔwɔwɔ kple tsi ƒe dɔwɔwɔ tiatia aɖewo me elabena ateŋu anɔ te ɖe acid, alkali kple dze ƒe tsi geɖe nu.

Atikewo ƒe tsitretsitsi nɔ te ɖe nusi tututu, eƒe agbɔsɔsɔme, dzoxɔxɔ, nyaƒoɖeamenu, ɣeyiɣi si woatsɔ ado goe, mɔ̃ ƒe nuteɖeamedzi kple welding mɔnu dzi.

Mele be woazã agbalẽ si ƒe amadede nye boblododo si sɔ na amewo katã le eɖokui si na atikewo ƒe tsigoewo, elektrikŋusẽnamɔ̃wo alo tsinono ƒe ɖoɖowo o.

Ele be dɔwɔƒewo ƒe dɔwo nazã PVC-U agbalẽvi si woɖo ɖi na atike ƒe hatsotso si me woŋlɔ atikewo ƒe ɖekawɔwɔ, weldability kple ɣeyiɣi didi ƒe subɔsubɔ nɔnɔmewo ɖo.

Dzo-Xɔxe, Antistatic kple Dzeside Tɔxɛwo

Nuɖuɖu-Kadodo Kple Atikewɔwɔ Ŋuti Dɔwɔnawo

Mele be woaɖɔ PVC-gbadzɛ si ƒe amadede nye UV-si li ke si wozãna ɖaa le eɖokui si be enye nuɖuɖu ƒe kadodo dedie alo atikewɔwɔ ƒe dzesi o.

Nuɖuɖu-kadodo ƒe nyonyo nɔ te ɖe PVC resin, stabilizers, pigments, additives, nusiwo wogbugbɔ zã, nuɖuɖu ƒomevi, kadodo ɣeyiɣi, dzoxɔxɔ kple yiyiƒe asi dzi.

Atikewɔwɔ me dɔwɔwɔ ate ŋu abia be woatsɔ nu xoxo siwo dzi wokpɔ ŋusẽ ɖo, wo yometiti, dzadzɛnyenye, nyatakaka siwo ku ɖe nugbagbewo ƒe ɖekawɔwɔ ŋu, dodokpɔ le dɔlékuiwutikewo zazã ŋu kple nusiwo wowɔ vɔ ƒe kpeɖodzi.

Ele be nuƒlelawo nagblɔ sedede kple dodokpɔ ƒe nudidi siwo sɔ hafi atia nuɖuɖu ƒe kadodo alo atikewɔwɔ me PVC ƒe dzesi tɔxɛ aɖe.

Dodokpɔ Siwo Wokafu be Woatsɔ Akpɔ Dzedzeme Dzi

• PVC resin, stabilizer, amadede kple additive ƒe kpeɖodzi.

• Titrime kple titrime ƒe mɔɖeɖe ɖe nu ŋu.

• Sheet ƒe didime, kekeme kple diagonal tolerance.

• Flatness, bow, curl kple nugbɔ ƒe nɔnɔme.

• Density kple sheet-weight ƒe kpeɖodzinana.

• Amadede dzidzedze kple amadede ƒe vovototo tso hatsotso ɖeka me.

• Gloss, matte level kple anyigba-nɔnɔme ƒe ɖekawɔwɔ.

• Teƒe yibɔwo, gel, dowo, sisi ƒe dzesiwo, ƒoƒo kple ɖiƒoƒo.

• Tensile ŋusẽ, didime kple modulus le afisi wogblɔe le.

• Ŋusẽkpɔɖeamedzi ƒe ŋusẽ kple vuvɔ-ŋusẽkpɔɖeamedzi ƒe dɔwɔwɔ le afisi wòhiã le.

• Vicat ƒe fafa kple dzoxɔxɔ-ʋuʋu ƒe dɔwɔwɔ.

• Dimension ƒe tɔtrɔ le dzoxɔxɔ ƒe dodo vɔ megbe.

• UV ƒe ɖeɖefia, amadede ƒe vovototo kple keklẽ ƒe léle ɖe te.

• Yame ƒe nɔnɔme ƒe ŋusẽkpɔɖeamedzi alo tensile-property retention.

• Agbalẽtata ƒe adhesion kple abrasion tsitretsitsi.

• Thermoforming, bending, welding kple kadodo dodokpɔwo.

• Dodokpɔ siwo wowɔna tsɔ tsi tre ɖe atikewo ŋu hena dɔwɔƒewo zazã.

• Dodokpɔ siwo wowɔna tsɔ tsi tre ɖe anyigba ŋu hena antistatic grades.

• Dzoxɔxɔ ƒe dodokpɔwo hena dzesi siwo me dzo mele o.

• Packing, pallet kple nugoe-agbawo me dzodzro.

PVC ƒe agbalẽ si ƒe amadede le ɖoɖo nu ƒe Tiatiawɔblɔɖe

• Standard sheet ƒe titrime tso abe 0.21mm va ɖo 6.5mm.

• Tiatia thin-film ƒe nɔnɔmewo tso abe 0.06mm ene.

• 700 × 1000mm, 915 × 1830mm kple 1220 × 2440mm ƒe agbalẽwo.

• Agbalẽvi ƒe didime siwo wowɔ ɖe ɖoɖo nu kple esiwo wotso ɖe woƒe lolome nu.

• Amadede ɣi, yevu, dzĩ, ɣi, amadede dzẽ, blɔ kple esiwo wowɔ ɖe ɖoɖo nu.

• Nusiwo ƒe amadede me mekɔ o, siwo me kɔ eye wo me kɔ.

• RAL, Pantone kple physical-sample amadede ƒe sɔsɔ.

• Glossy, matte, frosted kple embossed anyigbawo.

• Xɔme, UV-si li ke kple dɔwɔwɔ-koŋ gota dzesiwo.

• Agbalẽtata, dzoxɔxɔ ƒe nɔnɔmewɔwɔ kple dɔwɔƒewo ƒe wɔwɔme ƒe dzesiwo.

• Atike siwo ŋu wotrɔ asi le le ŋusẽkpɔɖeamedzi ŋu, esiwo me dzo mele o kple esiwo tsi tre ɖe dɔlékuiwo ŋu.

• Film si kpɔa ame ta le akpa ɖeka alo evea siaa dzi le afisi wòsɔ le le mɔ̃ɖaŋununya nu.

• Dzesi siwo wowɔ ɖe ɖoɖo nu, pallets, nubablɛwo kple wo ɖoɖoɖa ƒe dzesiwo.

Nyatakaka Siwo Hiã Na PVC Sheet Quote

• Wobia be wòanye titrime kple mɔɖeɖe ɖe nu ŋu.

• Agbalẽvi alo agbalẽ xatsaxatsa ƒe didime siwo hiã.

• Agbalẽ sesẽ alo PVC xɔtutu bubu.

• Dzedzeme si me mekɔ o, si me kɔ alo si me kɔ.

• Amadede si hiã, RAL, Pantone alo ŋutilã me kpɔɖeŋu.

• Glossy, matte, frosted alo embossed anyigba.

• Xɔme alo gota zazã.

• Dukɔ si me woayi kple yame ƒe nɔnɔme.

• Ɣeyiɣi si wokpɔ mɔ be woawɔ le gota.

• UV-yame ƒe nɔnɔme ƒe dzidzenu si wobia kple gaƒoƒo siwo woatsɔ akpɔe.

• Amadede ƒe vovototo gãtɔ kekeake, ɣie alo keklẽ-bu ƒe seɖoƒe.

• Agbalẽtata, lãɖeɖe, thermoforming, welding alo banding ƒe ɖoɖo.

• Nusiwo hiã be woatsɔ aƒoe, dzobibi, antistatic alo atike ƒe nɔnɔmewo.

• Ametakpɔnu-film ƒe nudidi.

• Dodokpɔ ŋuti nyatakaka siwo hiã kple sedziwɔwɔ ŋuti nuŋlɔɖiwo.

• Gbãtɔ ƒe nudɔdɔ ƒe agbɔsɔsɔme kple ƒe sia ƒe ƒe didi si wobu.

• Packing, destination port kple ŋkeke si wobia be woatsɔe vɛ.

Ðo Wò Amadede PVC Agbalẽvi Nudidiwo

PVC Nyatakaka gbalẽvi siwo do ƒome kplii kple Dodokpɔ ƒe Nyatakakawo

PVC nyatakaka gbalẽvi geɖewo kple dodokpɔ ŋuti nyatakakawo le axa gbãtɔa dzi. Wodzra wo ɖo ɖe ete abe numekugbalẽ siwo do ƒome kplii ene.

Nuŋlɔɖi aɖewo ku ɖe film si me kɔ, gray board, offset-printing sheet alo PVC nu bubu aɖe ŋu. Hafi nàzã nyatakaka aɖe la, ɖo kpe edzi be eƒe wɔwɔme, amadede, titrime, afisi wowɔe le kple dodokpɔ ƒe kpɔɖeŋu ku ɖe PVC-gbadzɛ si ƒe amadede sɔ pɛpɛpɛ si UV-si li ke si nèƒle la ŋu.

   PVC Clear Sheet Nyatakaka gbalẽvi

   Dzoxɔxɔ si le PVC Rigid Sheet ŋu

   PVC Grey Board Dodokpɔ Ŋuti Nyatakaka

   PVC Clear Film Nyatakaka gbalẽvi

   PVC Sheet Dodokpɔ Ŋuti Nyatakaka

   20mm Grey Board Dodokpɔ ƒe Nyatakaka

   PVC Agbalẽvi na Offset Tata Dodokpɔ Nyatakaka

Nubablɛwo Kple Wo Ðoɖoɖa

Kpɔɖeŋu ƒe babla: Woate ŋu atsɔ PE kotokuwo akpɔ A4 agbalẽwo kple amadede ƒe kpɔɖeŋuwo ta eye woabla wo ɖe agbalẽɖoɖoɖaɖakawo me.

Agbalẽwo ƒe babla: Woate ŋu atsɔ PE film alo kraft pepa abla PVC gbadzɛwo eye woatsɔ pallet sesẽwo akpɔ wo ta.

Roll packing: Woate ŋu atsɔ ametakpɔ film kple kraft pepa abla PVC rolls tsɛwo ɖe reference 76mm paper core ŋu.

Takpɔkpɔ le anyigba dzi: Woate ŋu aƒo nu tso axa ɖeka alo axa eve ƒe ametakpɔnu film ŋu na agbalẽ siwo le keklẽm siwo hiã be woakpɔ wo ta tso ʋuʋudedi me.

Pallet packing: Woate ŋu abla agbalẽwo ɖe plywood alo fumigation-free export pallets dzi kple nugbɔ takpɔkpɔ, ka kple stretch film.

Nubablɛ siwo wowɔ ɖe ɖoɖo nu: Ame ŋutɔ ƒe ŋkɔwo, dzesidenu siwo wota, barcode kple dzesi siwo wowɔ ɖe ɖoɖo nu be woaɖo wo ɖe amewo la li.

Agbatsɔtsɔ: Agbatsɔtsɔ ƒe agbɔsɔsɔme nɔ te ɖe eƒe titrime, agbalẽa ƒe didime, pallet ƒe nɔnɔme, agbalẽ xatsaxatsa ƒe didime kple seɖoƒe siwo woɖo na nugoe ƒe kpekpeme dzi.

Ɣeyiɣi si woatsɔ awɔe: Zi geɖe la, ewɔwɔ ƒe ɖoɖo bia abe ŋkeke 7-15 ene le amadede, atikewɔwɔ, nɔnɔme, kpɔɖeŋu, babla kple nusi wotsɔ de eme ƒe kpeɖodzi megbe.

Ðaseɖigbalẽwo Kple Sedziwɔwɔ Ŋuti Nuŋlɔɖiwo

Nuŋlɔɖi siwo li ate ŋu anye mɔ̃ɖaŋu ŋuti nyatakakawo, dedienɔnɔ ŋuti nyatakakawo, atike siwo ŋu seɖoƒe le ŋuti nyatakakawo, nunɔamesi ŋutɔŋutɔwo ŋuti nyatakakawo, UV-yame ƒe nɔnɔme ŋuti nyatakakawo, dzoxɔxɔ ƒe nyatakakawo kple nyonyome dzikpɔkpɔ ŋuti ɖaseɖigbalẽwo.

Ele be woalé ŋku ɖe nuŋlɔɖi ɖesiaɖe ŋu le alesi wowɔe pɛpɛpɛ, amadede, titrime, eƒe gogloƒe, teƒe si wowɔe le kple dodokpɔ ƒe kpɔɖeŋua nu.

Ele be woaɖɔ SGS le dodokpɔa ƒe lolome tututu nu eye mele be woatsɔe afia abe xexeame katã ƒe adzɔnuwo ƒe ɖaseɖigbalẽ ene o.

ISO 9001 ku ɖe habɔbɔ aɖe ƒe nyonyome dzikpɔkpɔ ƒe ɖoɖo ŋu eye meɖoa UV ƒe tsitretsitsi, dzo ƒe dɔwɔwɔ, nuɖuɖu ƒe dedienɔnɔ alo atikewo ƒe sɔsɔ ɖe wo ɖokui si o.

Ele be woaɖo kpe ɖaseɖigbalẽa tɔ, afisi wowɔe le, tata si wozãna ɖaa, afisi wòakeke ɖo kple ɣeyiɣi si wòawɔ dɔ nyuie dzi hafi woatae.

HSQY Xexeame Katã ƒe Nukpɔkpɔwo

Nukatae Nàtia HSQY be wòanye Wò Amadede PVC Agbalẽvi Dɔwɔƒe?

• PVC agbalẽ sesẽ siwo ƒe amadede le sesẽm na agbalẽtata, dzesiwo kple wo wɔwɔ.

• Titrime siwo woɖo ɖi tso abe 0.21mm va ɖo 6.5mm ene.

• Agbalẽvi ƒe didime siwo sɔ kple esiwo wowɔ ɖe ɖoɖo nu.

• Amadede siwo me mekɔ o, siwo me kɔ eye wodzena nyuie ƒe tiatia.

• RAL, Pantone kple physical-sample amadede ƒe sɔsɔ.

• Glossy, matte, frosted kple embossed nuwuwu.

• Xɔme kple dɔwɔwɔ-koŋ UV-li ke gota grades.

• Agbalẽtata, dzoxɔxɔ ƒe wɔwɔme kple dɔwɔƒewo ƒe wɔwɔme ƒe dzesiwo.

• Kpɔɖeŋuwo na amadede, UV, agbalẽtata kple ewɔwɔ ƒe dodokpɔ.

• Dzɔdzɔmeŋutete me dzodzro le kpɔɖeŋu siwo dzi woda asi ɖo kple nɔnɔme tɔxɛwo nu.

• Nubablɛ siwo wowɔ ɖe ɖoɖo nu kple dukɔwo dome meliɖoɖo ƒe kpekpeɖeŋu.

Hafi woawɔe le agbɔsɔsɔ gã me la, HSQY ɖo aɖaŋu be woado PVC agbalẽvi si wotia la kpɔ to asisi la ƒe agbalẽtata, lãɖeɖe, wɔwɔme, babla, gaƒoƒo kple gotagome eɖoɖo ƒe nɔnɔme ŋutɔŋutɔwo zazã me.

Te ɖe HSQY ŋu hena Kpɔɖeŋuwo kple Asixɔxɔ

Nya Siwo Wobiana Enuenu Tso UV-Stabilized Colored PVC Sheets Ŋu

Nukae nye PVC-gbadzɛ si ƒe amadede le sesẽm?

Enye PVC-gbadzɛ sesẽ si me futukpɔ mele o si wotsɔ amadedewo wɔe be wòawɔ amadede si me mekɔ o, si me kɔ alo si me kɔ.

Nukae PVC si UV-si li ke fia?

Efia be atike siwo wotsɔ kpe ɖe eŋu siwo wotia be woatsɔ aɖe ɣe ƒe keklẽ si do ƒome kple ɣe ƒe keklẽ, ɣie, keklẽ ƒe bu kple eƒe ŋeŋe dzi akpɔtɔ la le atike la me.

Ðe PVC si wotsɔ UV-si li ke la te ŋu nɔa te ɖe yame ƒe nɔnɔme nu tegbeea?

Ao, gota gome dɔwɔwɔ nɔ te ɖe atike si wowɔ, amadede, titrime, yame ƒe nɔnɔme, eɖoɖo, mɔfiame si woatsɔ akpɔe kple ɣeyiɣi si wobia be woatsɔ awɔ dɔe dzi.

Ðe woate ŋu azã amadede ɖesiaɖe le gotaa?

Ele be woada amadede ɖesiaɖe kpɔ ɖe vovo elabena amadedewo kpɔa ŋusẽ ɖe UV ƒe liƒo, dzoxɔxɔ ƒe xɔxlɔ̃ kple amadede ƒe léle ɖe te dzi.

Ðe PVC-gbadzɛ siwo do viviti la xɔa dzo ɖe gota wua?

Zi geɖe la, amadede viviwo xɔa ɣe ƒe dzoxɔxɔ geɖe wu amadede ɣi alo esiwo me kɔ, si ate ŋu ana dzoxɔxɔ ƒe kekeɖenudɔwɔwɔ kple panel ƒe dzoxɔxɔ nadzi ɖe edzi.

Aleke wodoa UV ƒe dɔlélenutsiŋutete kpɔna?

Dodokpɔ ateŋu azã ASTM D4329, ASTM G154, ISO 4892-3 alo mɔnu si dzi wolɔ̃ ɖo, kple amadede, keklẽ, ɣie kple mɔ̃ɖaŋu-nɔnɔmewo léle ɖe te ƒe dodokpɔ.

Ðe gaƒoƒo 1000 ƒe UV dodokpɔ sɔ kple gota ƒe xexlẽme aɖe si woɖo ɖia?

Ao, wozãa dodokpɔ kabakaba koŋ tsɔ tsɔa nuwo sɔna kple wo nɔewo le nɔnɔme siwo dzi wokpɔ ŋusẽ ɖo me eye mesɔ kple gota gome ɣeyiɣi ɖeka tẽ le yame ƒe nɔnɔme ɖesiaɖe me o.

Titrime kawoe li?

Agbalẽvi ƒe titrime si wozãna ɖaa la tso abe 0.21mm va ɖo 6.5mm ene. Woate ŋu akpɔ thinner ƒe nɔnɔme tiatia aɖewo tso abe 0.06mm ene.

Agbalẽvi ƒe lolome siwo wozãna ɖaa kawoe li?

Dzidzeme siwo woɖo ɖi dometɔ aɖewoe nye 700 × 1000mm, 915 × 1830mm kple 1220 × 2440mm.

Ðe woate ŋu awɔ agbalẽvi ƒe didime siwo wowɔ ɖe ɖoɖo nua?

Ɛ̃. Woate ŋu awɔ didime siwo wowɔ ɖe ɖoɖo nu kple esiwo wotso ɖe woƒe lolome nu le kekeme kple dɔwɔnuwo ƒe seɖoƒe si sɔ me.

Amadede kawoe li?

Amadede siwo wozãna ɖaa dometɔ aɖewoe nye ɣi, yibɔ, dzĩ, ɣi, amadede dzẽ kple blɔ. Woate ŋu atsɔ amadede bubuwo asɔ kple nusi dzi woda asi ɖo.

Ðe HSQY ate ŋu asɔ kple RAL alo Pantone ƒe amadedea?

Ɛ̃. Woateŋu ada RAL, Pantone alo physical-sample matching kpɔ le pigment ƒe anyinɔnɔ kple nudɔdɔ ƒe agbɔsɔsɔ suetɔ nu.

Ðe PVC-gbadzɛ siwo ƒe amadede me kɔ la lia?

Ɛ̃. Woate ŋu awɔ amadede siwo me kɔ kple esiwo me kɔ nyuie le nukpɔkpɔ kple titrime ƒe nudidiwo nu.

Ðe PVC-gbadzɛ sia sɔ kple PVC-foam boarda?

Ao, atike sia nye PVC-gbadzɛ sesẽ si le ʋeʋẽm. PVC foam board ƒe lãmenugbagbeviwo ƒe nu vevi si le bɔbɔe eye eƒe kpekpeme le ʋɛ ŋutɔ.

Ðe woate ŋu ata PVC-gbadzɛ siwo le amadede vovovowo mea?

Woate ŋu ata anyigba siwo sɔ ɖe screen dzi, woata UV inkjet alo woata UV offset le ink-adhesion kple curing dodokpɔwo megbe.

Ðe woate ŋu atsɔ nɔnɔmetata siwo ƒe amadede le keklẽm ata PVC-gbadzɛ siwo do vivitia?

Ẽ, gake woate ŋu abia be woatsɔ nuŋlɔtsi ɣi alo primer layer si me mekɔ o awɔe be substrate ƒe amadede nagakpɔ ŋusẽ ɖe nɔnɔmetata la dzi o.

Ðe woate ŋu atsɔ dzoxɔxɔ awɔ PVC-gbadzɛ si le amadede vovovowo mea?

Dzeside si dzi woda asi ɖo ateŋu anye vacuum alo nyaƒoɖeamenu si wowɔ le dzoxɔxɔ, aŋɔ, he goglome kple fafa ƒe nɔnɔmewo dodokpɔ vɔ megbe.

Ðe amadedea trɔna le dzoxɔxɔ ƒe nɔnɔmewɔwɔ vɔ megbea?

Kekeɖenu goglo ate ŋu aɖe titrime dzi akpɔtɔ eye wòatrɔ amadede si dze abe, keklẽ alo keklẽ si me mekɔ o le teƒe siwo wowɔ geɖe le ene. Wokafui be woado ewɔwɔ kpɔ.

Ðe woate ŋu atsɔ CNC aɖo PVC agbalẽa dzia?

Ɛ̃. Zã dɔwɔnu ɖaɖɛwo, nuɖuɖu ƒe agbɔsɔsɔme si sɔ, agbalẽa ƒe kpeɖeŋutɔ kple eɖeɖe si sɔ na plastic-mɔ̃wo.

Ðe woate ŋu atsɔ laser atso PVC-gbadzɛa?

Womekafui be woatso laser kple nuŋɔŋlɔ dzro ko o elabena PVC ate ŋu ana ya alo ke si me afɔku le nado. Wokafui be woatsɔ mɔ̃ atsoe.

Ðe tsi mate ŋu age ɖe agbalẽa me oa?

PVC sesẽ la mexɔa tsi boo o eye wòte ŋu nɔa te ɖe tsidzadza si sɔ nu, gake ɖoɖo blibo si woda ɖe eme la nɔ te ɖe ƒunukpeƒewo, nusiwo wotsɔ blaa nu, goawo kple nutrenuwo dzi.

Ðe atikewo te ŋu nɔa te ɖe agbalẽa nua?

PVC te ŋu nɔa te ɖe atike geɖe nu, gake ele be woalé ŋku ɖe alesi wòsɔ ɖe wo nɔewo nu ŋu hena atike si tututu, eƒe agbɔsɔsɔme, dzoxɔxɔ kple ɣeyiɣi si woatsɔ awɔe.

Ðe woate ŋu azã PVC si ƒe amadede sɔ na atikewo ƒe tsigoewoa?

Mele be woazã dzesi alo atsyɔ̃ɖoɖo ƒe dzesi si wozãna le wo ɖokui si na atikewo ƒe tsigoewo o. Wobia be woawɔ adzɔnuwɔƒe ƒe PVC-U ƒe dzeside tɔxɛ aɖe kple mɔ̃ɖaŋudɔwo me toto.

Ðe PVC-gbadzɛ si le amadede vovovowo me la mate ŋu axɔ dzo oa?

Mele be woagblɔ be dzo mate ŋu age ɖe eme keŋkeŋ o. Ele be woatsɔ dodokpɔ ƒe nyatakaka aɖo kpe dzo ƒe dɔwɔwɔ dzi hena dzeside, amadede kple titrime tututu.

Ðe dzesi si nye antistatic li?

Woate ŋu ada atike si tsi tre ɖe dɔlékuiwutike ŋu kpɔ le alesi wòhiã be wòate ŋu anɔ te ɖe anyigba ƒe nɔnɔme nu, fafa, ɣeyiɣi didi si wòxɔna kple alesi wòzãnɛ nu.

Ðe PVC-gbadzɛa sɔ na nuɖuɖu babla?

Mele be woazã UV-gbadzɛ si ƒe amadede le ɖoɖo nu le eɖokui si na nuɖuɖu ƒe kadodo o. Wobia be woawɔ atike si woɖo ɖi na wo kple afisi woayi ƒe asi ŋuti nuŋlɔɖiwo.

Ðe woate ŋu azã PVC si le amadede vovovowo me atsɔ awɔ atikewoa?

Atikewɔwɔ me zazã bia be woatsɔ dzeside si sɔ kple nusiwo wotsɔ wɔe, dzadzɛnyenye, nusiwo woate ŋu akpɔ kple nusiwo wowɔ vɔ ƒe nudidiwo ƒe kpeɖodzi.

Ðe ametakpɔnu ƒe film li?

Woate ŋu aƒo nu tso axa ɖeka alo axa eve ƒe ametakpɔnu film ŋu na glossy sheet ƒe nɔnɔme tiatia aɖewo.

Nukae nye nudɔdɔ ƒe agbɔsɔsɔ suetɔ kekeake?

Standard amadedewo kple nɔnɔmewo zi geɖe la, MOQ anɔ abe 1000kg ene. Amadede siwo wowɔ ɖe ɖoɖo nu alo UV ƒe atike tɔxɛwo ate ŋu abia abe 3000kg ene.

Ðe kpɔɖeŋuwo lia?

A4 ƒe agbalẽvi siwo li fifia kple amadede ƒe kpɔɖeŋuwo ate ŋu anɔ anyi. UV alo amadede ƒe kpɔɖeŋu siwo wowɔ ɖe ɖoɖo nu ate ŋu abia be woawɔ ɖoɖo ɖe dodokpɔ wɔwɔ ŋu.

Nukae nye ɣeyiɣi si woatsɔ awɔe?

Zi geɖe la, ewɔwɔ si wozãna ɖaa bia abe ŋkeke 7-15 ene le amadede, eƒe wɔwɔme, eƒe nɔnɔme, kpɔɖeŋu, nubablɛ kple nusi wotsɔ de eme ƒe kpeɖodzi megbe.

Nyatakaka kawoe hiã hafi woate ŋu ayɔ nyayɔyɔ?

Na eƒe titrime, didime, amadede, anyigba, xɔme alo gota zazã, UV dodokpɔ, dɔwɔwɔ mɔnu, nɔnɔme tɔxɛwo, agbɔsɔsɔme, babla kple yiyi.

Na PVC ƒe Agbalẽvi si ƒe Amadede Trɔ asi le Nu Ŋu ƒe Nyayɔyɔ

Ku ɖe HSQY Plastic Group ŋu

HSQY Plastic Group naa amadede sesẽ PVC agbalẽwo, PVC agbalẽ siwo me kɔ, PVC agbalẽ siwo woate ŋu ata, PVC filmwo, PET agbalẽwo, PP agbalẽwo kple plastic nu siwo wowɔ ɖe ɖoɖo nu na dukɔwo dome B2B asisiwo.

HSQY doa alɔ dzesiwɔlawo, agbalẽtalawo, ɖeɖefia dɔwɔƒewo, plastic fabricators, thermoforming dɔwɔƒewo, dɔwɔƒewo processors, importers kple distributors kple amadede ƒe sɔsɔ, kpɔɖeŋu dodokpɔ, customized wɔwɔ, nyonyome me toto kple export packing.

Bia Nya Siwo Woagblɔ Kple Kpɔɖeŋu