Fayil na PVC blister mai haske

Fayil na PVC blister mai haske Mai Samar da Mai Kera & Mai Gyaran Thermoforming

HSQY Plastics yana ƙera kuma yana samar da blister mai ƙarfi PVC takardar abu s da birgima don thermoforming, forming vacuum, marufi blister, marufi clamshell, tire , akwatunan naɗewa, bugu da sauran aikace-aikacen canza masana'antu.

Wannan kayan kuma an san shi da transparent PVC takardar abu , rigidid PVC film, PVC blister film, PVC thermoforming takardar abu ko rigidid vinyl roll stock, yana haɗa kyawawan bayyanannu, tauri, kwanciyar hankali da aiki na tsari ga masana'antun marufi, thermoformers, firintoci da masu canza filastik.

HSQY na iya samar da launuka masu haske, masu launin shuɗi-shuɗi da kuma na musamman masu tauri PVC a cikin naɗaɗɗun, lebur takardar abu da kuma tsarin yanke-zuwa-girma. Kauri, faɗi, nauyin naɗewa, girman tsakiya, ƙarewar saman, launi, tsari da marufi za a iya keɓance su bisa ga kayan aikin sarrafawa na abokin ciniki da aikace-aikacen da aka gama.

Don aikace-aikacen da aka tsara kamar marufin blister na magunguna, marufin abinci ko marufin na'urorin likitanci, dole ne a zaɓi takamaiman matakin PVC da takaddun tallafi masu dacewa maimakon ɗauka cewa daidaitaccen bayyanannen PVC ya dace.

Menene Takardar Bori Mai Bayyanar PVC ?

Blester mai haske PVC takardar abu wani abu ne mai tauri ko mai ɗan tauri wanda aka ƙera don gyaran thermo da sauran hanyoyin canza filastik. A ƙarƙashin dumama mai sarrafawa, matakin thermoforming mai dacewa PVC takardar abu yana laushi sosai don a samar da shi a kan ko a cikin mold ta amfani da injin injin, matsi ko taimakon injin.

Bayan an yi shi kuma aka sanyaya shi, kayan yana riƙe da tsarin da aka ƙera kuma ana iya gyara shi, a huda shi, a rufe shi, a buga shi ko a haɗa shi cikin ƙuraje, ƙuraje masu kauri, tire da sauran abubuwan da aka haɗa a cikin marufi.

Clear PVC yana ba da damar ganin samfura, wanda hakan ke sa ya zama da amfani musamman ga marufi na dillalai inda abokan ciniki ke buƙatar ganin samfurin da aka faka kafin siyan sa. Hakanan ana amfani da ma'aunin shuɗi mai haske don samar da kamannin gani mai sarrafawa yayin da ake riƙe da bayyana.

Ya kamata a zaɓi ainihin tsarin PVC bisa ga zurfin tsari, kauri takardar abu , saurin injin, ƙirar mold, taurin fakitin ƙarshe, buƙatun bugawa da duk wani buƙatun ƙa'ida da ke da alaƙa da samfurin da aka shirya.

PVC Bayanin Takardar Blester

HSQY yana ba da maki masu ƙarfi da yawa PVC , don haka ƙayyadaddun bayanai na ƙarshe sun dogara da samfurin da aka zaɓa da aikace-aikacensa. Teburin da ke ƙasa ya taƙaita zaɓuɓɓukan gama gari don aikace-aikacen blister mai haske da thermoforming.

Ya kamata a tabbatar da daidaiton kauri, juriyar faɗi, halayen gani, ingancin saman, diamita na birgima, diamita na tsakiya, tsari da buƙatun bin ƙa'idodi a cikin ƙayyadaddun samfurin da aka amince da su kafin samar da taro.

Muhimman Fa'idodin Takardar Blister Mai Tsauri PVC

Babban Bayyanannen Bayani don Ganuwa ta Samfura

Tsarin rigidity mai haske PVC yana bawa abokan ciniki, masu dubawa da masu gudanar da samarwa damar ganin kayan da aka shirya a sarari. Wannan yana bayyana PVC musamman mai amfani ga kayan aiki, kayan kwalliya, kayan rubutu, kayan wasa, kayan haɗi na lantarki da sauran kayayyakin dillalai inda gabatarwar gani take da mahimmanci.

Kyakkyawan Aikin Thermoforming

Ana iya dumama matakin thermoforming mai dacewa PVC kuma a samar da shi zuwa ramukan ƙura, tire , ƙusoshin marufi da sauran siffofi masu girma uku. Kauri mai daidaito yana taimakawa wajen tallafawa yanayin dumama da samar da iri ɗaya.

Amfanin Tauri da Kwanciyar Hankali

Mai ƙarfi PVC yana riƙe da tauri mai amfani bayan an samar da shi, yana taimakawa wajen kare samfuran da aka shirya da kuma kula da yanayin blister ɗin da aka gama ko tire .

Sanyi saman

Maki masu haske PVC da aka zaɓa suna ba da fili mai santsi don gabatarwa mai haske, bugawa, naɗewa da sauran hanyoyin juyawa na ƙasa.

Tsarin Naɗi da Takarda na Musamman

HSQY na iya samar da na'urori masu sarrafa na'urori, na'urorin yankewa, na'urorin lebur takardar abu } da kuma yanke takardar abu s don masu juyawa su iya daidaita faɗin abu da girma zuwa injunan thermoforming, kayan bugawa da buƙatun marufi da aka gama.

Amfani da Takardar Blister Mai Bayyanannen PVC

Marufi na Borotin Siyarwa

Ana iya yin amfani da PVC mai haske a cikin blisters na dillalai don kayan aiki, kayan aikin hannu, kayan haɗi, kayan rubutu, kayan wasa, kayan kwalliya da sauran kayayyakin masarufi. Ramin da aka samar mai haske yana nuna samfurin yayin da yake taimakawa wajen riƙe shi a wurinsa.

Marufin Clamshell

Ana iya canza marufi mai ƙarfi na Thermoformed PVC zuwa marufi mai hinged ko guda biyu na clamshell don samfuran dillalai waɗanda ke buƙatar gabatarwa mai haske da kariya ta zahiri.

Marufi da Kayan Aiki

Maki mai kauri PVC zai iya samar da tauri mai amfani ga sukurori, kayan aiki, kayan haɗi da sauran kayayyakin kayan aiki. Ya kamata a zaɓi kauri na ƙarshe bisa ga nauyin samfurin, zurfin rami da ƙirar fakiti.

Marufi na Lantarki

Ana iya amfani da Rigid PVC don zaɓaɓɓun kayan haɗi na lantarki da sassan. Inda ake buƙatar sarrafa fitarwar lantarki, ya kamata a zaɓi takamaiman kayan antistatic ko ESD maimakon daidaitaccen manufa ta gabaɗaya PVC .

Kayan Kwalliya da Kula da Kai

Marufi mai haske sosai yana ba da damar kayan kwalliya da kayan kwalliya su kasance a bayyane yayin da suke tallafawa nunin kaya da wurin sanya kaya.

Akwatunan Nadawa Masu Ban Sha'awa

Ana iya buga maki PVC tsauri da suka dace, a yi musu alama, a yi musu lanƙwasa, sannan a naɗe su cikin akwatuna masu haske da tagogi masu marufi. Ya kamata a gwada aikin bugawa da naɗewa da kauri da saman da aka zaɓa.

Marufin Abinci

Ana iya ƙirƙiro makin PVC da aka zaɓa don takamaiman aikace-aikacen hulɗa da abinci. Masu siye dole ne su ƙayyade kasuwar da za a je, nau'in abinci, zafin hulɗa, tsawon lokacin hulɗa da kuma takaddun ƙaura ko bin ƙa'idodi da ake buƙata kafin zaɓar kayan.

Marufin Magani

Marufin blister na magunguna yana amfani da fim ɗin da aka keɓe mai ƙarfi na PVC tare da tsari mai sarrafawa, ƙayyadaddun birgima, bin diddigin abubuwa da takaddun tallafi masu dacewa. Masu siye da ke buƙatar marufin kwamfutar hannu ko capsule ya kamata su zaɓi samfurin da ya dace da magunguna maimakon blister na yau da kullun na yau da kullun takardar abu .

Janar PVC Takardar Blister vs Magunguna PVC Fim ɗin Blister

Ana iya yin blister mai haske na gabaɗaya takardar abu da fim ɗin samar da magunguna duka daga matsewa PVC , amma bai kamata a ɗauke su a matsayin samfura iri ɗaya ba.

HSQY tana ba da takamaiman nau'in fim ɗin magunguna PVC ga abokan ciniki waɗanda ke samar da fakitin blister na magunguna. Kada a maye gurbin marufi na gabaɗaya PVC ba tare da kimantawar fasaha da ƙa'idoji da ta dace ba.

Yadda PVC Blister Thermoforming ke Aiki

Tsarin Thermoforming yana canza siffa mai kama da lebur PVC zuwa siffar marufi mai girma uku ta hanyar dumama, samarwa da sanyaya.

1. Ciyar da Kayan Aiki: An ɗora PVC na'urar jujjuyawa ko takardar abu a cikin kayan aikin thermoforming.

2. Dumamawa: Ana dumama kayan har sai ya kai ga yanayin da ya dace.

3. Samarwa: Injin injina, matsi ko taimakon injina yana jawo ko tura wanda aka tausasa PVC a kan mold.

4. Sanyaya: Ana sanyaya kayan da aka ƙera sosai don riƙe sabon siffarsa.

5. Gyaran Kaya: Ana cire kayan da suka wuce gona da iri ta hanyar yanke kauri, naushi ko wani tsari mai dacewa na gyarawa.

6. Haɗawa ko Rufewa: Ana haɗa blister ɗin da kati, fim, foil ko wani ɓangaren marufi bisa ga ƙirar fakitin.

Zafin da aka samar, lokacin dumama da sigogin zagayowar ba abu ne na kowa da kowa ba. Sun bambanta da tsarin PVC , kauri na kayan aiki, tsarin dumama, saurin injin, yanayin mold da zurfin rami. Ya kamata a yi gwajin samarwa ta amfani da kayan aiki da mold na gaske.

Yadda Ake Zaɓar PVC Kauri na Takardar Blister

Kauri na takardar yana shafar taurin fakitin, zurfin samar da kayayyaki, rarraba kayan, ƙarfin rami, aikin yankewa da kuma farashin kayan gabaɗaya.

Waɗannan jeri jagora ne na zaɓi maimakon ƙa'idodi na duniya baki ɗaya. Dole ne a yi la'akari da girman fakiti, nauyin samfur, rabon tsari da yanayin ƙira yayin tantance ma'aunin ƙarshe.

Mai launin shuɗi, mai haske, mai kauri da kuma mai sanyi PVC

Muhimman Abubuwan Inganci ga Takardar Blester PVC

Don samar da thermoforming mai yawan girma, masu siye ya kamata su ayyana buƙatun inganci masu aunawa maimakon kimanta PVC takardar abu kawai ta hanyar bayyanar.

• Daidaito a Kauri: Ma'aunin da bai daidaita ba zai iya shafar dumama, kauri a bango da kuma sake maimaitawa.

• Bayyananne da Hazo: Ya kamata a amince da buƙatun gani idan ana buƙatar ganin samfura.

• Daidaiton Tint: Launin shuɗi ko launin da aka saba da shi ya kamata ya kasance daidai a cikin haƙurin da aka amince da shi.

• Ingancin Fuskar: Ƙuraje da yawa, ɗigon baƙi, gels da lahani da ake iya gani na iya rage bayyanar fakitin.

• Faɗi: Lanƙwasa takardar lanƙwasa da naɗewa na iya haifar da matsala wajen ciyarwa da kuma samar da matsaloli.

• Aikin Thermoforming: Ya kamata a kimanta kayan don zurfin mold da yanayin injin.

• Ragewa: Halin girma a ƙarƙashin zafi yana shafar tsari da kuma yanke ƙasa.

• Aikin Tasiri: Bukatun da aka gama sun bambanta dangane da nauyin samfur da yanayin sarrafawa.

• Daidaiton Yanka Nauyin Nauyi: Faɗin nauyin da ya dace yana taimakawa wajen kula da ciyarwa akai-akai akan kayan marufi na atomatik.

• Kula da Haɗin gwiwa: Masu siye da ke aiki da layukan atomatik akai-akai ya kamata su ƙayyade buƙatun haɗin gwiwa masu karɓuwa.

Bayani dalla-dalla na Na'urorin Gyaran Thermoforming na Atomatik

Masu siye da ke amfani da kayan aikin marufi na thermoforming ko blister akai-akai ya kamata su ba da bayanai game da injin kafin yin oda.

PVC vs PET don Marufi na Blister

PVC da PET duka kayan thermoforming ne masu haske da ake amfani da su sosai, amma babu ɗayan kayan da ya fi kyau ta atomatik ga kowane aikace-aikace.

PVC vs PVC / PVDC don Marufin Magani

Ana amfani da siririn maganin gargajiya PVC a matsayin yanar gizo mai rahusa don allunan da capsules masu dacewa, amma aikin danshi da iskar oxygen ɗinsa ya yi ƙasa da tsarin da aka rufe da shinge mai ƙarfi ko kuma aka laminated.

Zaɓin kayan marufi na magunguna dole ne ya dogara ne akan nazarin kwanciyar hankali, tsawon lokacin shiryawa, yanayin rarrabawa, ƙirar fakitin da cikakken tsarin blister maimakon sunan abu kawai.

Bugawa da Sarrafawa na Biyu

Dangane da matakin PVC da aka zaɓa, madaurin haske mai ƙarfi takardar abu s na iya tallafawa hanyoyi da dama na juyawa daga ƙasa.

• Tsarin thermoforming

• Tsarin injin tsotsa

• Yanke mutu

• Yanke Guillotine

• Naushe

• Ƙirƙira da ƙara girma

• Naɗewa

• Buga allo

• Bugawa ta offset akan ma'auni masu dacewa

• Tsarin buga UV masu jituwa

• Lamination da ƙera bisa ga ƙayyadaddun samfurin

Tawada ta bugawa, tsarin warkarwa, gyaran saman da kuma buƙatun mannewa sun bambanta. Abokan ciniki ya kamata su gwada kayan PVC da aka zaɓa ta amfani da ainihin tawada da kayan aikin samarwa kafin a samar da su da yawa.

Zaɓuɓɓukan Takardar Blister na Musamman PVC

Yadda Ake Zaɓar Takardar Blister Mai Daidai PVC

1. Bayyana samfurin da aka shirya: Kayan aiki, kayan kwalliya, kayan lantarki, kayan wasa, abinci, magunguna ko wani aikace-aikace.

2. Tabbatar da tsarin yin amfani da injin: Tsarin yin amfani da injin tsotsa, tsarin yin amfani da injin tsotsa, tsarin yin amfani da thermoforming gabaɗaya ko kuma tsarin yin amfani da injin lebur takardar abu .

3. Samar da girman ramin: Tsarin zurfin da kuma yanayin siffofi yana tasiri ga zaɓin ma'aunin.

4. Zaɓi kauri: Daidaita tauri, ƙarfin rami, samar da aiki da amfani da kayan.

5. Bayyana buƙatun gani: Launi mai haske, shuɗi, hazo mai karɓuwa, sheƙi da kuma ma'aunin lahani na saman.

6. Tabbatar da girman injin: Faɗin birgima, diamita na tsakiya, diamita na birgima da matsakaicin nauyin birgima.

7. Siffanta hanyoyin da ke ƙasa: Bugawa, naɗewa, yanke mutu, rufewa ko lamination.

8. Tabbatar da buƙatun ƙa'idoji: Musamman don abinci, magunguna da aikace-aikacen likita.

9. Gudanar da gwajin samarwa: Gwada kayan aiki akan ainihin tsarin ƙira, injina da kuma tsarin da ke ƙasa kafin amincewa da samar da kayayyaki masu yawa.

PVC Jerin Ingancin Takardar Blister ga Masu Siyan B2B

Marufi da Kayayyakin Fitarwa

HSQY yana samar da kayan blister na PVC don jigilar B2B na ƙasashen duniya a cikin tsarin naɗi da takardar abu . Ana iya daidaita marufi bisa ga girman kayan aiki da buƙatun jigilar abokan ciniki.

• Naɗewa mai kariya daga PE don birgima

• Takardar waje ta Kraft ko kwali

• Marufi na birgima mai fenti

• Fakitin fakitin Flat- takardar abu

• Kariyar gefuna da kusurwa

• Nauyin birgima na musamman

• Alamar musamman da kuma ganewar marufi

• Tsarin loda kwantena don yin oda mai yawa

Me Yasa Zaku Sayi Takardar Blister daga PVC Plastics?

• Faɗin PVC Nau'in Samfura: HSQY yana samar da marufi mai ƙarfi PVC don marufi, gyaran zafi, bugawa, aikace-aikacen magunguna da sauran amfani na masana'antu.

• Kauri da Faɗi na Musamman: Ana iya daidaita girman kayan aiki da kayan aikin abokin ciniki da ƙirar fakiti.

• Na'urar Naɗawa da Takarda: Ana samun manyan na'urori, na'urorin yankewa, takardar abu daidaita girman da aka yanke na yau da kullun.

• Zaɓuɓɓukan Fuskoki da yawa: Za a iya tattauna zaɓuɓɓukan saman da ke da sheƙi, matte, frosted da sauran zaɓuɓɓukan saman.

• Tsarin Musamman: Ana iya kimanta takamaiman aikace-aikacen antistatic, UV-stabilized da kuma amfani da aka tsara.

• Tallafin Samfuri: Abokan ciniki za su iya kimanta kayan ta amfani da ainihin injin su na thermoforming, mold da kuma tsarin da ke ƙasa.

• Kwarewar Fitar da Kaya ta B2B: HSQY tana tallafawa masana'antun marufi, masu sauya kaya, dillalai da masu rarrabawa a kasuwannin duniya.

• Shirye-shiryen Samar da Kaya na OEM: Ana iya haɓaka kauri, faɗi, birgima da kuma takamaiman marufi don ayyukan kasuwanci.

Wane Bayani Ya Kamata A Haɗa A Cikin Takardar Blister RFQ ta PVC ?

Samar da cikakkun bayanai na fasaha yana taimaka mana mu yi ƙirƙiro bayanai daidai kuma mu ba da shawarar kayan da suka dace.

1. Aikace-aikacen marufi na gamawa

2. PVC kauri da juriya

3. Faɗin birgima ko girman takardar abu

4. Launi mai haske, shuɗi ko wani launi daban

5. Mai sheƙi, matte, mai sanyi ko wani wuri

6. Nau'in injin thermoforming

7. Girman mold da zurfin tsari na kimanin

8. Diamita na ciki na tsakiya

9. Matsakaicin diamita na birgima ko nauyin birgima

10. Bugawa, naɗewa, rufewa ko wasu hanyoyin da ke ƙasa

11. Abinci, magunguna, likita ko wasu buƙatun bin ƙa'idodi

12. Adadin gwaji

13. Amfani da wata-wata ko shekara-shekara

14. Ƙasa ko tashar jiragen ruwa da ake zuwa

15. Hanyar marufi da ake buƙata

Tambayoyin da Ake Yawan Yi Game da Takardar Blister PVC

Me ake amfani da PVC blister takardar abu ?

Ana amfani da blister mai ƙarfi PVC takardar abu a matsayin blister mai tsari na thermoformed dillalai, clamshells, tire , marufi na kayan aiki, kayan haɗin lantarki, marufi na kayan kwalliya, marufi na takardu, akwatunan haske da sauran aikace-aikacen canza filastik.

Shin PVC blister takardar abu yana da tauri ko kuma mai lankwasawa?

PVC blister takardar abu gabaɗaya abu ne mai tauri ko mara ƙarfi maimakon fim ɗin PVC mai laushi wanda aka yi amfani da shi don labule, jakunkuna ko murfin tebur. Taurinsa yana ba shi damar riƙe blister ko siffar tire bayan an yi amfani da thermoforming.

Shin za a iya yin amfani da yanayin zafi mai haske PVC takardar abu ?

Eh. Ana amfani da ma'aunin tauri masu dacewa PVC sosai don samar da thermoforming da kuma samar da injin tsotsa. Ya kamata abokan ciniki su gwada ma'aunin da aka zaɓa ta amfani da ainihin injin su, mold da kuma zurfin samar da su kafin a samar da su a kasuwa.

Wane kauri ake amfani da shi wajen shirya marufi na PVC ?

Ana amfani da kimanin 0.2 mm zuwa 0.5 mm akai-akai don aikace-aikacen marufi na baki ɗaya, yayin da za a iya zaɓar abu mai sirara ko kauri dangane da girman rami, taurin fakitin, nauyin samfurin da tsarin samarwa.

Shin 1 mm mai haske PVC ya dace da thermoforming?

Eh. Ana iya amfani da matakin thermoforming mai tsauri na mm 1 mai dacewa ga manyan ƙuraje, PVC tire , ƙuraje masu ƙarfi da abubuwan da aka samar waɗanda ke buƙatar tauri fiye da siririn fim ɗin ƙuraje.

Shin HSQY zai iya samar da blister PVC takardar abu a cikin biredi?

Eh. HSQY yana samar da na'urori masu mahimmanci da na'urorin da aka keɓance na musamman da kuma kayan da aka yanke zuwa girman da takardar abu saba. Ana iya keɓance faɗin na'urar, girman tsakiya, diamita na waje da nauyin na'urar bisa ga buƙatun samarwa.

Menene launin shuɗi mai haske PVC ?

Mai launin shuɗi PVC wani abu ne mai haske mai tauri PVC wanda ke ɗauke da ɗan launin shuɗi mai haske. Yana ci gaba da bayyana amma yana ba da kamanni daban da tsaka-tsaki mai haske PVC . Ya kamata a tabbatar da launin da ake buƙata ta amfani da samfurin da aka amince da shi.

Za a iya buga PVC blister takardar abu ?

Makin bugawa mai tsauri PVC da aka zaɓa na iya tallafawa tsarin bugawa mai jituwa ta allo, offset ko UV. Aikin bugawa ya dogara da yanayin saman, sinadaran tawada, kafin a yi magani da kuma hanyar warkarwa, don haka ana ba da shawarar gwajin samarwa.

Shin daidaitaccen PVC blister takardar abu abinci ne mai inganci?

Ba ta atomatik ba. Amfani da abinci da aka shafa yana buƙatar tsari da takardu masu dacewa don kasuwar da aka nufa, nau'in abinci, zafin jiki da yanayin hulɗa. Faɗa wa HSQY cewa aikace-aikacen marufi ne na abinci kafin zaɓar kayan.

Za a iya amfani da blister na yau da kullun PVC takardar abu don marufi na magunguna?

Bai kamata a yi amfani da marufi na gaba ɗaya PVC ta atomatik don marufi na farko na magunguna ba. Aikace-aikacen marufi na magunguna suna buƙatar fim ɗin da aka keɓe, ƙayyadaddun bayanai, takaddun da suka dace da kuma tabbatarwa tare da cikakken tsarin marufi na blister.

Shin PVC yana samar da shinge mai ƙarfi na danshi?

Siffa mai tauri PVC tana ba da kariyar muhalli ta asali amma bai kamata a ɗauke ta a matsayin babban tsari mai shinge ba. Aikace-aikacen da ke buƙatar ƙarin danshi ko kariyar iskar oxygen na iya buƙatar PVC / PVDC ko wani kayan marufi mai shinge mai girma.

Shin marufin PVC yana jure wa yara?

Kayan PVC da kansa ba ya sa fakitin ya yi jure wa yara. Jure wa yara siffa ce ta cikakken ƙirar fakitin da aka gwada, gami da ƙirƙirar yanar gizo, kayan rufewa, hanyar buɗewa da kuma gina fakiti.

Shin akwai alamar cewa an yi amfani da marufin blister a matsayin abin da ya ɓatar da PVC ?

Shaidar da ke nuna cewa akwai matsala ta dogara ne da cikakken tsarin fakitin da kuma tsarin rufewa. Bai kamata a bayyana mai haske PVC kawai a matsayin wanda aka riga aka gyara ba sai dai idan an tsara shi musamman kuma an tantance tsarin fakitin da aka gama don wannan aikin.

Za a iya sake yin amfani da PVC blister takardar abu ?

Ana iya sake yin amfani da PVC a fasaha, amma samuwar tattarawa da sake yin amfani da su ya bambanta sosai dangane da ƙasa, ƙaramar hukuma da tsarin marufi. Ya kamata masu siye su kimanta tsarin kula da sharar gida da buƙatun kasuwa na ƙarshe lokacin da suke yin iƙirarin dorewa.

Shin ya kamata in zaɓi PVC ko PET don marufi mai ƙura?

Zaɓi bisa ga kayan aikin thermoforming, buƙatun samfura, tsarin rufewa, bayyanannen bayani, ƙirar fakiti, buƙatun dorewa, la'akari da sake amfani da kayan gida da jimillar farashi. HSQY yana samar da kayan thermoforming na PVC da PET kuma yana iya taimakawa wajen kwatanta zaɓuɓɓukan biyu don takamaiman aikace-aikace.

Shin HSQY zai iya keɓance kauri da faɗin PVC na blister takardar abu ?

Eh. HSQY zai iya tattauna kauri na musamman, faɗin birgima, girman takardar abu , tsarin birgima, launi, saman da tsari bisa ga yawan oda da buƙatun fasaha.

Zan iya neman samfurin kafin a samar da kayayyaki da yawa?

Eh. Ana ba da shawarar gwajin samfuri ko gwaji-na-bincike saboda aikin thermoforming ya dogara da ainihin injin ku, mold, tsarin dumama da yanayin kunshin ku.

Wane bayani kuke buƙata don shirya farashi?

Don Allah a samar da girma, kauri, faɗin birgima ko takardar abu , launi, saman, hanyar thermoforming, zurfin mold, buƙatun core na birgima da diamita, hanyoyin da ke ƙasa, buƙatun bin ƙa'idodi, adadin oda da ƙasar da za a je.

Nemi Fayil na PVC blister mai haske Samfura da Farashi

HSQY yana samar da na'urorin sarrafa zafi masu haske PVC takardar abu s da birgima ga masu samar da thermoformers, masana'antun marufi, firintoci, masu canza filastik, masu rarrabawa da abokan cinikin OEM a duk duniya.

Ko kuna buƙatar 0.2 mm clear PVC don marufi mai sauƙi, kayan thermoforming 0.3–0.5 mm ko kuma kauri mai tauri PVC don tire da sassan da aka ƙera a masana'antu, ƙungiyarmu za ta iya sake duba buƙatun sarrafawa da samfuran da aka gama.

Aika bayanin fasaha, samfurin yanzu ko zane na marufi don neman farashin masana'anta, bayanin samfurin da zaɓuɓɓukan naɗi na musamman ko takardar abu .