PVC Kulɛri sɛbɛn ni UV Lakanali

UV-Stabilized Kulɛri Rigid PVC sɛbɛn

HSQY bɛ PVC sɛbɛn gɛlɛnw kulɛrilenw dilan minnu bɛ UV sabati, kɛnɛma ni so kɔnɔ taamasiyɛnw kama, jiralan sɛbɛnnenw, kogow datugucogo, panɛriw masirilenw, fɛnw minnu dilannen don ni funteni ye, minɛnw datugulanw ani izini dilanni.

O fɛn ye PVC sɛbɛn gɛlɛn ye min ka gɛlɛn, min tɛ fomu ye, a bɛ sɔrɔ kulɛriw la minnu tɛ ye, minnu bɛ yeelen bɔ ani minnu bɛ ye. Kulɛri jɔnjɔnw ye fin, nɛrɛ, bilen, jɛman, jɛman ani bulu ye, k’a sɔrɔ ladamu kulɛriw bɛ se ka bɛn ka kɛɲɛ ni farikolo ta ye, RAL ka ɲɛfɔli, Pantone ɲɛfɔli walima kulɛri sariya min dagalen don.

Fɛnɲɛnɛmaw janya bɛ daminɛ milimɛtɛrɛ 0,21 ɲɔgɔn na ka se milimɛtɛrɛ 6,5 ma. PVC filimu finmanw ni sɛbɛnw fana bɛ se ka sɔrɔ ka kɛɲɛ ni u dilanni cogoya, u gɛlɛya, u bonya ani u kɛcogo wajibiyalenw ye.

Sɛbɛnw hakɛ dantigɛlenw ye 700 × 1000mm, 915 × 1830mm ani 1220 × 2440mm ye. Sɛbɛn hakɛ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, tigɛyɔrɔw ani kurukuruw cogoyaw, olu bɛ se ka baro kɛ u dilanni bonya hakɛ dantɛmɛnen kɔnɔ min bɛ se milimɛtɛrɛ 1280 ma.

UV lakanani bɛ kɛ ni furakɛlicogo kɛrɛnkɛrɛnnen ye, min kɔnɔ, sabatilifɛn bɛnnenw, ɲɛgɛnw ani faralifɛnw bɛ sɔrɔ. Kɛnɛma baarakɛcogo bɛ bɔ kulɛri sugandilen na, a bonya, a waati cogoya, a sigicogo, a ka tile bɔcogo ani a baara waati wajibiyalen.

PVC kulɛri dantigɛlen man kan ka fɔ a yɛrɛma ko a bɛnnen don kɛnɛma baara ma kudayi, dumuni na, furakɛli minɛnw, kemikɛli jidagayɔrɔw, antistatique kɛcogo walima tasuma suguya kɛrɛnkɛrɛnnen dɔ. O baarakɛminɛnw bɛ jateden dɔ de wajibiya min dabɔra u danma ani sɛgɛsɛgɛli kunnafoniw minnu bɛ dɛmɛ don.

A dafalen sɛgɛsɛgɛ HSQY PVC kulɛri sɛbɛnw hakɛ walima seginnkanni wɛrɛw PVC sɛbɛnfura gɛlɛnw.

PVC sɛbɛn sɔngɔko ɲini    Aw ye Kulɛri ni UV Samples ɲini

Wideyo PVC sɛbɛn kulɛrilen

Aw ye wideyo lajɛ min bɛ duguma walasa ka HSQY kulɛri PVC sɛbɛnw lajɛ, u dilanni cogoyaw, u dilanni suganditaw ani plastiki-sɛbɛnw furakɛcogo minnu bɛ kɛ ka kɛɲɛ ni aw sago ye.

PVC sɛbɛn kulɛrilenw Jaw

PVC sɛbɛn gɛlɛn kulɛrilen min bɛ sabati ni UV ye, o ye mun ye?

PVC sɛbɛn gɛlɛn kulɛrilen min bɛ sabati ni UV ye, o ye kuloridi polivinili sɛbɛn gɛlɛn ye min dilannen don ni ɲɛgɛnw ni sabatilifɛnw ye minnu bɛ wele ko ultraviolet walasa ka dɔ bɔ tiɲɛni na min bɛ sɔrɔ tile yeelen fɛ.

O sɛbɛn bɛ se ka kɛ fɛn ye min tɛ ye, min bɛ yeelen bɔ walima min bɛ yeelen bɔ, wa a bɛ se ka dilan yɔrɔw la minnu bɛ manamana, minnu bɛ kɛ ni nɛnɛ ye, minnu bɛ kɛ ni nɛnɛ ye, minnu bɛ sɔgɔsɔgɔ walima minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

O fɛn bɛ gɛlɛya nafama di, kemikɛli, kuran sɔgɔli ani fɛn dilanni baarakɛcogo taamasiyɛnw, jiralanw, minɛnw yɔrɔw ani izini baara sugandilenw na.

UV sabatili bɛ se ka kulɛriw dɔgɔyali dɔɔni dɔɔni, ka kɛ jɛman ye, ka ɲɛda kretiɛn, ka kɛnɛya bɔnɛ ani ka sɔgɔsɔgɔ, nka a tɛ kɛ sababu ye ka PVC furakɛcogo bɛɛ kɛ fɛn ye min tɛ se ka kɛ waati bɛɛ la kudayi.

Kɛnɛyako bɛnnen ka kan ka dafa ka kɛɲɛ ni a kulɛri tigitigi ye, a ɲɛkisɛ, a bonya, a UV pake, a waati ani a baara waati latigɛlen.

UV-Stabilized Kulɛri PVC sɛbɛn ɲɛnamaw

Ɲɛfɔli labanw ka kan ka furakɛli hakɛ dafalen jira, a bonya muɲuni, a bonya, a kulɛri jiracogo, a yeelen, a yɔrɔ, UV wajibiyalen, waati sɛgɛsɛgɛli, a dilanni taabolo ani a sigicogo laɲini.

Solid Rigide PVC Sheet vs PVC Foam Board

Sannikɛlaw man kan ka PVC sɛbɛn gɛlɛn ni PVC fomu pankurun suma ni u janya dɔrɔn ye. Sheet girinya, density, stiffness, fastener retention ani fabrication kɛcogo tɛ kelen ye.

UV lakanani bɛ jateminɛ cogo min na

UV kɛlɛli ka kan ka ɲɛfɔ baarakɛcogo laɲiniw fɛ minnu bɛ se ka suman sanni ka kɛ UV kɛlɛli kumasen ye min bɛ kɛ fɛn bɛɛ lajɛlen na.

Teliya-sɛnɛko ɲɛfɔli minnu bɛ kɛ tuma caman na, olu ye ASTM D4329, ASTM G154 ani ISO 4892-3 ye. Raporo ka kan ka lanpan suguya fɔ, a yeelen hakɛ, a funteni, a jiginni walima a jibɔcogo ani a bɔli waati bɛɛ.

Kɔrɔbɔli teliya nafa ka bon fɛnw sumalen na nka a tɛ bɛn san hakɛ latigɛlen ma kɛnɛma waati bɛɛ la.

Kulɛri sugandili kɛnɛma PVC sɛbɛnw kama

Pigment chimie bɛ nɔ bila kulɛri sabatili la, UV minɛni na, funteni caman sɔrɔli la ani a yecogo kuntaalajan na.

A ka c’a la, kulɛri finmanw ni kulɛri jɛmanw tɛ tile funteni caman minɛ ka tɛmɛ kulɛri dibimanw kan. Fɛnɲɛnɛma nɛrɛma, bulu dibiman, jɛman dibiman ani bilenman dibiman bɛ se ka se sanfɛla funteni caman ma tile yeelen tilennen kɔrɔ.

Ni sɛbɛnfura funteni ka bon, o bɛ se ka dɔ fara funteni bonya kan, ka a biri, ka dɔ fara degun kan min bɛ siri ani ka a hakɛ lamaga.

Kɛnɛma porozɛw ka kan ka kulɛri, sigicogo, panɛri hakɛ, dɛmɛni yɔrɔ, dingɛw bɔli, funteni hakɛ makɔnɔnen ani baarakɛwaati laɲinitaw fɔ.

Kulɛri kelen ka waati jateminɛnan man kan ka kɛ a yɛrɛma pigment walima pigment wɛrɛ la.

Sɛbɛnni ni taamasiyɛnw kɛcogo

PVC sɛbɛnw kulɛri nɔgɔlenw bɛ se ka kɛ taamasiyɛn sɛbɛnnenw ye, jirali ja, feerekɛyɔrɔ jiralanw, sira taamasiyɛnw ani laseli pankurunw.

Sɛbɛnni ka kan ka kɔrɔbɔ a yɔrɔ tigitigi kan, a kulɛri ani a dilanni kulu kan. Substrats dibimanw bɛ se ka kɛ ni tintiri finman ye walima primer layer opaque.

Fabrikasiyɔn ni Thermoforming (Tɛrmoforming) ye

• Aw bɛ baara kɛ ni sɔgɔlanw ye minnu ka nɔgɔn, routeurs, milling minɛnw ani drills minnu dilannen don plastiki sɛbɛnw kama.

• Aw bɛ sɛbɛnfura dɛmɛ masin kɛtuma na walasa ka dɔ bɔ a yɛrɛyɛrɛli la, a sɔgɔli la ani a dakun tiɲɛni na.

• Aw bɛ yɔrɔ caman bila kɛnɛma jiginni dingɛw lamini na walasa ka funteni bonya.

• Aw bɛ aw yɛrɛ tanga sirilanw sirili ma kojugu, kɛrɛnkɛrɛnnenya la kɛnɛma panɛri belebelebaw kan.

• Aw bɛ baara kɛ ni funteni ni nɔgɔ cogoya bɛnnenw ye walasa ka fɛnɲɛnamafagalan walima degun dilan.

• Aw bɛ kulɛri ni kɛnɛya sabatili dafa thermoforming kɔfɛ.

• Aw bɛ baara kɛ ni PVC-combatible welding berew, nɔrɔlanw ani solvent simanw ye.

• Aw bɛ nɔrɔlan kɔrɔbɔ a kulɛri tigitigi kan, a ɲɛda ani a kɛcogo UV.

• Aw bɛ fiɲɛbɔ di funteni, soja ani funteni dilanni waati.

• Aw kana baara kɛ ni laser tigɛminɛn gansanw ye walima ni laser ye PVC kama.

Fɛn dilanni taabolo

HSQY bɛ baara kɛ ni extrusion walima calendrier ye ka kɛɲɛ ni a janya, a bonya, a sanfɛla ani a fɛn dilannen cogoya sugandilen ye.

Materiel première ani Kulɛri ɲagaminen

PVC resin, stabilisateurs, pigments, processus aids, impact modifiers ani application-specifique UV farankanw bɛ pese ka ɲagami ka kɛɲɛ ni furakɛlicogo dafalen ye.

Extrusion walima Kalandriya

O fɛnɲɛnamafagalan bɛ kɛ sɛbɛnfura walima filimu ye ni funteni, tansiyɔn, layini teliya ani wuluwulu cogoyaw ye minnu bɛ kɔrɔsi.

Surface Finishing (Surface Finishing) ye

A ɲɛda bɛ se ka jɛya, ka kɛ matte ye, ka kɛ nɛnɛ ye walima ka kɛ fɛn ye min bɛ kɛ ni fɛn ye min bɛ se ka kɛ ka kɛɲɛ ni fɛn dilannenw ka sariya ye min dagalen don.

Nɛnɛ ni Dimension Control

Nɛnɛ min bɛ kɔrɔsi, o bɛ dɛmɛ ka a janya kelen, a flakɛ, a bonya ani a hakɛ sabatili sabati.

Tigɛ, Winding ani Sɛgɛsɛgɛli

Fura in bɛ tigɛ ka kɛ sɛbɛnw ye walima ka a jogin ka kɛ kurukuruw ye, ka a sɛgɛsɛgɛ ani ka a pake ka kɛɲɛ ni komandi sɛbɛn ye min dabɔra.

PVC sɛbɛn gɛlɛn kulɛrilenw kɛcogo

• Kɛnɛma taamasiyɛnw : Sira taamasiyɛnw, lakana taamasiyɛnw ani kunnafonidilanw ni UV-stable grade sɛgɛsɛgɛlen ye.

• Piblisite minnu bɛ kɛ so kɔnɔ: Tablo sɛbɛnnenw, taamasiyɛnw minnu bɛ kɛ ka fɛnw laseli ani jirali ja.

• Fiyeere jiralanw : POP jiralanw, fɛn dilannenw, fɛnw bilayɔrɔw ani fɛn minnu bɛ kɛ ni taamasiyɛn ye.

• Kɔnɔnafɛnw : Kogow masirilenw, yɔrɔw ani sanfɛla panɛriw minnu bɛ dɛmɛ.

• Fɛn minnu bɛ kɛ ni funteni ye : Datugulanw, sow, sanubɔlanw ani jiralanw minnu dilannen don.

• Industriw dilanni : Minɛnw pannew, garadiw, finiw ani plastiki yɔrɔw dilannenw.

• Kimikisɛ minɛnw : Tanki, kanal ani jirisun sugandilenw ni izini hakɛ ni kemikɛli-kɛlɛli jateminɛ ye min dagalen don.

• Kuranko baarakɛcogo: Panɛriw ni u yɔrɔw minnu bɛ fɛnw tanga kuran ni tasuma ma.

• Jateblaw ni misaliw: Jatebɔlan kulɛrilenw minnu bɛ mɛn, tigɛlanw ani fɛn dilanni dɛmɛnanw.

Industriw ni kemikoro baarakɛcogo

PVC gɛlɛn bɛ kɛ kemikɛli ni ji furakɛli baara sugandilenw na bawo a bɛ se ka asidi, alkali ani kɔgɔ caman kɛlɛ.

Fɛnɲɛnamafagalanw tali bɛ bɔ fɛn tigitigi la, a hakɛ, a funteni, a tansiyɔn, a bɔli waati, a degun min bɛ kɛ ni masinw ye ani a sɔgɔcogo.

Sɛbɛn kulɛrilen min bɛ se ka kɛ piblisite bɛɛ ye, o man kan ka kɛ a yɛrɛma kemikɛlifɛnw, kuran-minɛnw walima ji minta-minɛnw kama.

Industri porozɛw ka kan ka baara kɛ ni PVC-U sɛbɛn ye min bɛ se ka kɛ kemikɛli ye, min sɛbɛnnen don kemikɛli bɛnkan, welda ani baarakɛcogo kuntaalajan.

Tasuma-fanga-minɛn, Antistatique ani Kɛrɛnkɛrɛnnenya la

Dumuni-ɲɔgɔnna ani furakɛli baarakɛcogo

PVC sɛbɛn kulɛrilen min bɛ sabati ni UV ye, o man kan ka fɔ a yɛrɛma ko a tɛ se ka kɛ dumuni na walima ko a bɛ se ka kɛ furakɛli la.

Dumuni ni ɲɔgɔn cɛ bɛnnen bɛ bɔ PVC resin, sabatilifɛnw, ɲɛgɛnw, faralifɛnw, fɛn minnu bɛ segin ka kɛ fɛn wɛrɛw ye, dumuni suguya, ɲɔgɔn sɔrɔli waati, funteni ani taayɔrɔ sugu la.

Furakɛcogo bɛ se ka kɛ sababu ye ka fɛnɲɛnamafagalanw kɔlɔsi minnu bɛ kɔlɔsi, ka tugu ɲɔgɔn kɔ, ka saniya, ka kunnafoniw di minnu bɛ tali kɛ fɛnɲɛnamaw la, ka sterilize sɛgɛsɛgɛli kɛ ani ka fɛn dilannenw tiɲɛni.

Sannikɛlaw ka kan ka sariyaw ni sɛgɛsɛgɛli wajibiyalenw tigitigi di sani u ka dumuni ni furakɛli PVC hakɛ kɛrɛnkɛrɛnnen dɔ sugandi.

Sɛgɛsɛgɛli minnu bɛ kɛ ka ɲɛsin jogoɲumanya kɔlɔsili ma

• PVC resin, stabilisateur, pigment ani additif sɛgɛsɛgɛli.

• A bonya ni a bonya muɲuni.

• Sheet janya, a bonya ani a diagonal tolerance.

• Flatness, bow, curl ani edge cogoya.

• Density ani sheet-weight sɛgɛsɛgɛli.

• Kulɛri sumani ani kulu ni kulu kulɛri danfara.

• Gloss, matte level ani surface-texture consistance.

• Nɔgɔ nɛrɛma, jeli, dingɛ, jibɔ taamasiɲɛw, sɔgɔsɔgɔninjɛ ani nɔgɔ.

• Tensile strength, elongation ani modulus yɔrɔ minnu kofɔlen don.

• Kɔnɔnafili fanga ni nɛnɛ-kɔlɔsili baarakɛcogo yɔrɔ minnu na a mago bɛ a la.

• Vicat softening ani funteni-deflection baarakɛcogo.

• Yɛlɛma min bɛ kɛ ni hakɛ ye funteni sɔrɔli kɔfɛ.

• UV jirali, kulɛri danfara ani kɛnɛya sabatili.

• Weathered impact walima tensile-property marali.

• Printing adhesion ani abrasion resistance.

• Termoforming, bending, welding ani bonding sɛgɛsɛgɛliw.

• Kimikɛ-sɔrɔ-sɛgɛsɛgɛliw ka ɲɛsin izini baarakɛcogo ma.

• Surface-resistance tests (sɛgɛsɛgɛliw) minnu bɛ kɛ ka ɲɛsin antistatic grades ma.

• Tasuma-fanga-sɛgɛsɛgɛliw tasuma-fagalan hakɛw kan.

• Pake, palɛti ani minɛnw doni sɛgɛsɛgɛli.

PVC sɛbɛn ɲɛnamaw sugandiliw

• Sɛbɛnw janya dantigɛlenw bɛ daminɛ milimɛtɛrɛ 0,21 ɲɔgɔn na ka se milimɛtɛrɛ 6,5 ma.

• Filimu finmanw ɲɛfɔli sugandilenw ka bɔ 0,06mm ɲɔgɔn na.

• 700 × 1000mm, 915 × 1830mm ani 1220 × 2440mm sɛbɛnw.

• Ladamu sɛbɛnw hakɛw ani tigɛlenw ka kɛɲɛ ni u bonya ye.

• Kulɛri finman, nɛrɛma, bilenman, jɛman, wuluwulu, bulu ani kulɛriw minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Fɛn minnu ɲɛ ye bulama ye, minnu bɛ yeelen bɔ ani minnu bɛ kɛnɛya.

• RAL, Pantone ani farikolo-sample kulɛri bɛnkan.

• Surfaces glossy, matte, frosted ani embossed.

• So kɔnɔ, UV-stabilisé ani baarakɛcogo kɛrɛnkɛrɛnnen kɛnɛma grades.

• Sɛbɛnni, thermoforming ani industrial-fabrication gradew.

• Fura minnu bɛ kɛ ni nɔ bilali ye, minnu tɛ tasuma bɔ ani minnu tɛ se ka wuli.

• Filimu min bɛ mɔgɔ tanga a fan kelen walima a fan fila bɛɛ la yɔrɔ min na a bɛnnen don fɛɛrɛko siratigɛ la.

• Labeliw, palɛtiw, pakew ani cikan taamasiyɛnw.

Kunnafoni minnu ka kan ka kɛ PVC sɛbɛnfura Quote la

• A ka kan ka kɛ a janya ni a muɲuni ye.

• Sɛbɛn walima rollo hakɛ wajibiyalenw.

• Sheet solide walima PVC jɔcogo wɛrɛ.

• A ɲɛda tɛ ye, a bɛ yeelen bɔ walima a bɛ kɛnɛya.

• Kulɛri wajibiyalen, RAL, Pantone walima farikolo taasibila.

• Surface glossy, matte, frosted walima embossed.

• So kɔnɔ walima kɛnɛma baarakɛcogo.

• Taama jamana ani waati cogoya.

• Kɛnɛma baara waati makɔnɔnen.

• UV-weathering standard wajibiyalen ani a jirali waatiw.

• Kulɛri danfaraba, jɛman walima kɛnɛya-bɔnɛ dan.

• Sɛbɛnni, tigɛ, thermoforming, welding walima bonding kɛcogo.

• A wajibiyalen don ka bɔgɔbɔgɔ, tasuma, antistatique walima kemikaliya.

• Protective-film wajibiyalen don.

• Kɔrɔbɔli rapɔɔri minnu wajibiyalen don ani sariya labatoli sɛbɛnw.

• Koman fɔlɔ hakɛ ani san ɲinini jateminɛlen.

• Packing, destination port ani delivery don wajibiyalen.

Aw ye aw ka PVC sɛbɛn kulɛrilen wajibiyalenw ci

PVC kunnafonidilanw ni sɛgɛsɛgɛli rapɔɔri minnu bɛ tali kɛ o la

PVC kunnafonisɛbɛn caman ni sɛgɛsɛgɛli rapɔɔriw bɛ ɲɛ fɔlɔ la. U maralen bɛ jukɔrɔ i n’a fɔ sɛbɛnw minnu bɛ tali kɛ ɲɔgɔn na.

Sɛbɛn dɔw bɛ tali kɛ filimu jɛlen na, pankurun gris, offset-printing sheet walima PVC fɛn wɛrɛ la. Sani aw ka baara kɛ ni kunnafoni ye, aw bɛ a sɛgɛsɛgɛ ko a dilanni, a kulɛri, a bonya, a dilanyɔrɔ ani a sɛgɛsɛgɛli kɛcogo bɛ tali kɛ PVC sɛbɛn kulɛri tigitigi la min bɛ san UV-stabilisé.

   PVC Clear Sheet Kunnafoni sɛbɛn

   PVC Rigid Sheet ka tasuma

   PVC Gris Board sɛgɛsɛgɛli rapɔɔri

   PVC Clear Film kunnafonisɛbɛn

   PVC sɛbɛnw sɛgɛsɛgɛli rapɔɔri

   20mm Gris Board Test Rapport

   PVC sɛbɛn min bɛ kɛ ka Offset sɛbɛnni sɛgɛsɛgɛli rapɔɔri kɛ

Foroko ni fɛnw lasecogo

Misaliw foroko : A4 sɛbɛnw ni kulɛriw bɛ se ka lakana ni PE bɔrɔw ye ani ka u pake cidenw ka kartɔnw kɔnɔ.

Sɛbɛnw pakew : PVC sɛbɛn flakɛtaw bɛ se ka siri ni PE filimu walima kraft papiye ye ani ka u lakana ni palɛti gɛlɛnw ye.

Kurukuruw pake : PVC kurukuru finmanw bɛ se ka siri ni lakanani filimu ni kraft papier ye ka papiye 76mm reference core lamini.

Surface protection: Baro bɛ se ka kɛ fan kelen walima fan fila lakanani filimu kan sɛbɛn ɲɛnamaw kan minnu mago bɛ sɔgɔsɔgɔninjɛ lakanani na.

Palɛtiw foroko : Sɛbɛnw bɛ se ka pake plywood kan walima palɛtiw kan minnu tɛ sisi bɔ jamana wɛrɛw la ni u dakunw lakanani ye, ni u sirilanw ye ani u bɛ se ka u senw wuli.

Foroko minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye: Mɔgɔ kelen-kelen ka sɛbɛnw, logo sɛbɛnnenw, barɔdiw ani cikan taamasiyɛn minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ sɔrɔ.

Minɛnw doni : Doni hakɛ bɛ bɔ a janya la, a sɛbɛnfura hakɛw la, a palɛti dilanni na, a kurukuruw cɛmancɛ la ani a minɛnw girinya dantigɛli sariya siratigɛ la.

Sɛnɛfɛnw dilanni waati : A ka c’a la, sɛnɛcogo jɔnjɔn bɛ tile 7-15 ɲɔgɔn de wajibiya, a kulɛri, a kɛcogo, a ɲɛfɔcogo, a misali, a pakew ani a bilali dafalen kɔfɛ.

Sɛbɛnw ni sariya labatoli sɛbɛnw

Sɛbɛn minnu bɛ sɔrɔ, olu bɛ se ka kɛ fɛɛrɛko kunnafoniw ye, lakana kunnafoniw sɛbɛnw, fɛn dantigɛlenw kunnafoniw, farikolo-nafolo kunnafoniw, UV-weathering kunnafoniw, tasuma-fanga-sɛbɛnw ani jogoɲumanya-sɛgɛsɛgɛliw.

Sɛbɛn bɛɛ ka kan ka lajɛ ni a dilanni tigitigi ye, a kulɛri, a bonya, a sanfɛla, a dilanni yɔrɔ ani a sɛgɛsɛgɛli kɛcogo.

SGS ka kan ka ɲɛfɔ ka kɛɲɛ ni sɛgɛsɛgɛli hakɛ tigitigi ye, wa a man kan ka jira iko diɲɛ bɛɛ ka fɛn dilannenw seereyali.

ISO 9001 bɛ tali kɛ jɛkulu dɔ ka jogoɲini siratigɛ la, wa a tɛ UV kɛlɛli, tasuma baarakɛcogo, dumuni lakanani walima kemikaliya bɛnkan sigi a yɛrɛma.

Seere tigi, a dilanni yɔrɔ, a bɔko sariyalen, a bonya ani a baara waati ka kan ka sɛgɛsɛgɛ sani a ka bɔ.

HSQY Duniya Ɲɛjiraliw

Mun na i bɛ HSQY sugandi ka kɛ i ka PVC sɛbɛn kulɛrilenw dilanbaga ye?

• PVC sɛbɛn gɛlɛnw kulɛri gɛlɛnw walasa ka sɛbɛnni kɛ, ka taamasiyɛnw kɛ ani ka u dilan.

• A janya bɛ daminɛ milimɛtɛrɛ 0,21 ɲɔgɔn na ka se milimɛtɛrɛ 6,5 ma.

• Sɛbɛn hakɛ minnu bɛ kɛ ka kɛɲɛ ni sariya ye ani minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Kulɛri suguya minnu tɛ ye, minnu bɛ yeelen bɔ ani minnu bɛ kɛnɛya.

• RAL, Pantone ani farikolo-sample kulɛri bɛnkan.

• Fɛnɲɛnɛmaw, matte, frosted ani embossed finiw.

• So kɔnɔ ani baarakɛcogo kɛrɛnkɛrɛnnenw UV-stabilisé kɛnɛma grades.

• Sɛbɛnni, thermoforming ani izini fabrication grades.

• Misaliw ye kulɛri, UV, sɛbɛnni ani fɛn dilanni jateminɛ ye.

• Jogoɲumanya sɛgɛsɛgɛli ka kɛɲɛ ni misaliw ni fɛn ɲɛfɔlenw ye minnu dabɔra.

• Foroko minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye ani jamana wɛrɛw ka cikanw dɛmɛni.

Sani u ka caman dilan, HSQY b’a ɲini ka PVC sɛbɛn sugandilen kɔrɔbɔ ni kiliyan ka sɛbɛnni, tigɛ, dilan, sirili, solda ani kɛnɛma sigicogo yɛrɛ ye.

Aw ye HSQY lajɛ walasa ka misaliw ni sɔngɔko dɔn

Ɲininkali minnu bɛ kɛ tuma caman na PVC kulɛrilenw kan minnu bɛ sabati ni UV ye

PVC sɛbɛn gɛlɛn kulɛrilen ye mun ye?

O ye PVC sɛbɛn gɛlɛn ye, min tɛ fomu ye, min dilannen don ni ɲɛgɛnw ye walasa ka fɛn kulɛrilen dɔ dilan min tɛ ye, min bɛ yeelen bɔ walima min bɛ ye.

PVC min sabatira ni UV ye, o kɔrɔ ye mun ye?

O kɔrɔ ye ko faralifɛnw bɛ sɔrɔ furakisɛ la minnu sugandira walasa ka tile yeelen bɔli dɔgɔya, ka kɛ jɛman ye, ka kɛnɛya bɔnɛ ani ka sɔgɔsɔgɔ.

Yala PVC min sabatilen don ni UV ye, o bɛ se ka kɛ kudayi wa?

Ayi, kɛnɛyako bɛ bɔ a dilanni na, a kulɛri, a bonya, a waati, a sigicogo, a jiracogo ani a baara waati wajibiyalen.

Yala kulɛri bɛɛ bɛ se ka kɛ kɛnɛma wa?

Kulɛri kelen-kelen bɛɛ ka kan ka jateminɛ u danma barisa ɲɛgɛnw bɛ nɔ bila UV sabatili la, funteni minɛni na ani kulɛri marali la.

Yala PVC sɛbɛn dibimanw bɛ funteni sɔrɔ kɛnɛma wa?

A ka c’a la, dibi kulɛriw bɛ tile funteni caman minɛ ka tɛmɛ kulɛri finman walima kulɛri jɛman kan, o bɛ se ka dɔ fara funteni bonya kan ani panɛri funteni kan.

UV kunbɛncogo bɛ sɛgɛsɛgɛ cogo di?

Kɔrɔbɔli bɛ se ka kɛ ni ASTM D4329, ASTM G154, ISO 4892-3 walima fɛɛrɛ ye min bɛnna a kan, ni kulɛri, kɛnɛya, jɛman ani masin-fɛnw marali jateminɛ ye.

Yala UV sɛgɛsɛgɛli sanga 1000 bɛ bɛn kɛnɛma san hakɛ latigɛlen ma wa?

Ayi, kɔrɔbɔli teliya bɛ kɛ kɛrɛnkɛrɛnnenya la walasa ka fɛnw suma ɲɔgɔn na cogoya kɔrɔsilenw na, wa a tɛ bɛn kɛnɛma waati kelen ma k’a ɲɛsin waati bɛɛ ma.

Fɛnɲɛnɛma jumɛnw bɛ sɔrɔ?

Fɛnɲɛnɛmaw janya bɛ daminɛ milimɛtɛrɛ 0,21 ɲɔgɔn na ka se milimɛtɛrɛ 6,5 ma. Fɛnɲɛnamafagalan sugandilenw bɛ se ka sɔrɔ ka bɔ 0,06mm ɲɔgɔn na.

Sɛbɛn hakɛ jɔnjɔn jumɛnw bɛ sɔrɔ?

A hakɛ dantigɛlenw ye 700 × 1000mm, 915 × 1830mm ani 1220 × 2440mm ye.

Yala ladamu sɛbɛnw hakɛw bɛ se ka dilan wa?

Awɔ. Hakɛ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye ani minnu tigɛra ka kɛɲɛ ni u bonya ye, olu bɛ se ka dilan u bonya ni u ka minɛnw dancɛw kɔnɔ minnu bɛ sirataama.

Kulɛri jumɛnw bɛ sɔrɔ?

Kulɛri jɔnjɔnw ye fin, nɛrɛ, bilen, jɛman, wuluwulu ani bulu ye. Kulɛri wɛrɛw bɛ se ka bɛn ni kunnafonisɛbɛn ye min dabɔra.

Yala HSQY bɛ se ka bɛn RAL walima Pantone kulɛri ma wa?

Awɔ. RAL, Pantone walima physical-sample matching bɛ se ka jateminɛ ka kɛɲɛ ni pigment sɔrɔli ye ani komandi hakɛ fitinin ye.

Yala PVC sɛbɛn kulɛri jɛlenw bɛ sɔrɔ wa?

Awɔ. Kulɛri kalasi minnu bɛ ye ani minnu bɛ yeelen bɔ, olu bɛ se ka dilan ka kɛɲɛ ni ɲɛnayeli ni u bonya wajibiyalenw ye.

Yala nin PVC sɛbɛn in ni PVC fomu pankurun ye kelen ye wa?

Ayi, nin fura in ye PVC sɛbɛn gɛlɛn ye min ka bon. PVC fomu board bɛ ni selilɛri kɔnɔna ye min ka nɔgɔn ani a density ka dɔgɔ kosɛbɛ.

Yala PVC sɛbɛn kulɛrilenw bɛ se ka sɛbɛn wa?

Yɔrɔ bɛnnenw bɛ se ka sɛbɛn ekran kan, ka UV inkjet sɛbɛn walima ka UV offset sɛbɛn enki nɔrɔli ni furakɛli sɛgɛsɛgɛliw kɔfɛ.

Yala PVC sɛbɛn dibimanw bɛ se ka sɛbɛn ni ja kulɛri jɛmanw ye wa?

Ɔwɔ, nka enki finman walima primer layer opaque bɛ se ka kɛ walasa ka substrat kulɛri bali ka nɔ bila ja la.

Yala PVC sɛbɛn kulɛrilen bɛ se ka kɛ ni funteni ye wa?

Grade min dabɔra, o bɛ se ka kɛ vacuum walima pressure ye min bɛ sɔrɔ funteni, mɔli, ja juguya ani nɛnɛ cogoyaw kɔrɔbɔlen kɔfɛ.

Yala a kulɛri bɛ Changé thermoforming kɔfɛ wa?

Ni aw ye a sɔgɔsɔgɔ ka dun, o bɛ se ka dɔ bɔ a bonya la ani ka a kulɛri, a ɲɛnama walima a ɲɛmajɔbaliya caman Changer yɔrɔw la minnu dilannen don kosɛbɛ. A ka ɲi ka fɛn dilanni kɔrɔbɔli kɛ.

Yala PVC sɛbɛn bɛ se ka CNC routed wa?

Awɔ. Aw bɛ baarakɛminɛn nɔgɔlenw kɛ, balo hakɛ bɛnnenw, sɛbɛnw dɛmɛni ani u bɔli minnu bɛnnen don plastiki masinw ma.

Yala PVC sɛbɛn bɛ se ka tigɛ ni laser ye wa?

Laser tigɛcogo gansan ni ja dilanni man ɲi barisa PVC bɛ se ka gazi faratilenw walima buguri bɔ. Masina tigɛcogo de ka ɲi.

Yala o sɛbɛnfura tɛ se ka ji sɔrɔ wa?

PVC gɛlɛnw ji minɛni ka dɔgɔn, wa a bɛ se ka ji sɔrɔ cogo bɛnnen na, nka a sigicogo dafalen bɛ bɔ jogindaw, sirilanw, dakunw ani datugulanw na.

Yala sɛbɛnfura bɛ se ka furakisɛw kɛlɛ wa?

PVC bɛ se ka kemikɛli caman kɛlɛ, nka a bɛnkan ka kan ka lajɛ ka a dɔn furakisɛ tigitigi, a hakɛ, a funteni ani a tali waati.

Yala PVC kulɛri standard bɛ se ka kɛ kemikɛli tankiw kama wa?

Taamaʃyɛnba walima finidoncogo hakɛ man kan ka kɛ a yɛrɛma kemikoro tankiw la. Industri PVC-U grade kɛrɛnkɛrɛnnen ani ɛntɛrinɛti seginnkanni de wajibiyalen don.

Yala PVC sɛbɛn kulɛrilen tɛ tasuma la wa?

A man kan ka fɔ ko tasuma tɛ se ka don a la pewu. Tasuma baarakɛcogo ka kan ka dɛmɛ ni sɛgɛsɛgɛli rapɔɔri ye min bɛ a jira ko a hakɛ tigitigi, a kulɛri ani a bonya.

Yala antistatique grade bɛ sɔrɔ wa?

Antistatique furakɛcogo bɛ se ka jateminɛ ka kɛɲɛ ni surface-resistance hakɛ wajibiyalen ye, nɛnɛ, a kuntaala ani a kɛcogo.

Yala PVC sɛbɛn bɛnnen don dumuniw foroko kɔnɔ wa?

UV sɛbɛn kulɛri standard man kan ka kɛ a yɛrɛma dumuni na. Formulasi kɛrɛnkɛrɛnnen ni destination-market sɛbɛnw de wajibiyalen don.

Yala PVC kulɛrilen bɛ se ka kɛ furakɛlifɛnw na wa?

Furakɛcogo bɛ ɲini ka fɛnɲɛnamafagalanw, saniya, nɔfɛtaama ani fɛn dilannenw wajibiyalenw hakɛ bɛnnen ni u tiɲɛni de wajibiya.

Yala filimu min bɛ mɔgɔ tanga, o bɛ sɔrɔ wa?

Fɛn kelen walima fan fila lakanani filimu bɛ se ka baro kɛ walasa ka sɛbɛn ɲɛnama sugandilenw ɲɛfɔ.

Koman hakɛ fitinin ye mun ye?

Kulɛriw ni fɛnw ɲɛfɔcogo jɔnjɔnw ka MOQ bɛ kilo 1000 ɲɔgɔn bɔ. Kulɛri minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye walima UV furakɛcogo kɛrɛnkɛrɛnnenw, olu bɛ se ka kilo 3000 ɲɔgɔn de wajibiya.

Yala misaliw bɛ sɔrɔ wa?

A4 sɛbɛnw ni kulɛri sɛgɛsɛgɛli minnu bɛ yen, olu bɛ se ka sɔrɔ. UV walima kulɛri misaliw minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka kɛ sababu ye ka labɛn kɛ ka kɔrɔbɔli kɛ.

A dilanni ɲɛminɛ waati ye mun ye?

A ka c’a la, sɛnɛcogo jɔnjɔn bɛ tile 7-15 ɲɔgɔn de wajibiya, a kulɛri, a dilanni, a ɲɛfɔcogo, a misali, a foroko ani a bilali dafalen kɔfɛ.

Kunnafoni jumɛnw de ka kan ka kɛ walasa ka quotation sɔrɔ?

Aw bɛ a janya, a bonya, a kulɛri, a sanfɛla, a kɛcogo min bɛ so kɔnɔ walima a kɛnɛma, UV sɛgɛsɛgɛli, a kɛcogo, a nafa kɛrɛnkɛrɛnnenw, a hakɛ, a pakew ani a taayɔrɔ di.

Aw ye PVC sɛbɛn ɲɛnama dɔ sɔrɔ min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye

HSQY Plastic Group ko la

HSQY Plastic Group bɛ PVC sɛbɛn gɛlɛn kulɛrilenw di, PVC sɛbɛn jɛlenw, PVC sɛbɛnw minnu bɛ se ka sɛbɛn, PVC filimuw, PET sɛbɛnw, PP sɛbɛnw ani plastiki fɛnw di minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye diɲɛ B2B kuntigiw ma.

HSQY bɛ dɛmɛ don taamasiyɛn dilannikɛlaw, sɛbɛnnikɛlaw, jiralitɔnw, plastiki dilannikɛlaw, thermoforming tɔnw, izini baarakɛlaw, fɛnw donbagaw ni fɛnw feerelaw dɛmɛ ni kulɛriw bɛnkan ye, misali sɛgɛsɛgɛli, fɛn dilanni min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, ka jogo sɛgɛsɛgɛ ani ka fɛnw pake bɔ jamana wɛrɛw la.

Quote ni Sample ɲini