PVC Kɔla Krataa a UV Ahobammɔ

UV-Stabilized Kɔla Rigid PVC Krataa

HSQY yɛ UV-stabilized kɔla rigid PVC nkrataa ma abɔnten ne dan mu nsɛnkyerɛnne, tintim displays, ɔfasu cladding, decorative panels, thermoformed afã horow, nnwinnade nkataso ne mfiridwuma fabrication.

Adeɛ no yɛ PVC krataa a ɛyɛ den a ɛnyɛ foam a ɛyɛ den a ɛwɔ kɔla a ɛyɛ opaque, translucent na ɛyɛ transparent. Standard kɔla ahorow no bi ne fitaa, tuntum, kɔkɔɔ, kɔkɔɔ, ahabammono ne bruu, bere a custom shades betumi ahyia sɛnea honam fam nhwɛsode, RAL nkyerɛkyerɛmu, Pantone nkyerɛkyerɛmu anaa kɔla gyinapɛn a wɔapene so te.

Standard krataa no mu duru firi bɛyɛ 0.21mm kɔsi 6.5mm. PVC sini ne nkratafa a ɛyɛ tratraa a ɛfiri bɛyɛ 0.06mm kɔsi 0.20mm nso betumi aba a ɛgyina sɛnea wɔyɛ, ne katee, ne tɛtrɛtɛ ne dwumadie ahwehwɛdeɛ so.

Nkratafa nsusuwii a wɔahyɛ da ayɛ no bi ne 700 × 1000mm, 915 × 1830mm ne 1220 × 2440mm. Wobetumi aka krataa akɛse a wɔayɛ no sɛnea wɔpɛ, asinasin a wɔatwa ne roll formats ho asɛm wɔ bɛyɛ 1280mm a ɛboro so a wɔyɛ no mu.

Wɔde UV ahobammɔ ma denam aduru pɔtee bi a wɔde di dwuma a nneɛma a ɛfata a ɛma ɛyɛ den, nneɛma a ɛma nneɛma yɛ kɔkɔɔ ne nneɛma a wɔde ka ho wom so. Abɔnten so adwumayɛ gyina kɔla a wɔapaw, ne kɛse, wim tebea, nea wɔde besisi hɔ, owia ahoɔden a wɔde bɛbɔ ne ɔsom nkwa nna a wɔhwehwɛ so.

Ɛnsɛ sɛ wɔka PVC a ɛwɔ kɔla a wɔahyɛ da ayɛ ho asɛm ara kwa sɛ ɛfata sɛ wɔde di dwuma daa wɔ abɔnten, wɔde di dwuma wɔ aduan mu, nnuru a wɔde di dwuma, nnuru a wɔde gu mu, nneɛma a wɔde siw ɔyare mmoawa ano anaa ogya nkyekyɛmu pɔtee bi. Saa application ahorow yi hwehwɛ sɛ wonya abasobɔde a wɔapene so wɔ ɔkwan soronko so ne sɔhwɛ data a ɛfoa so.

Hwehwɛ nea edi mũ no mu HSQY PVC kɔla krataa range anaa nhwehwɛmu foforo PVC krataa a ɛyɛ den a wɔde yɛ nneɛma.

Bisa PVC Krataa Bo a Wɔbɔ    Bisa Kɔla ne UV Nhwɛsode

PVC Krataa a Wɔde Kɔla Ayɛ Video

Hwɛ video a ɛwɔ aseɛ ha no na hwɛ HSQY kɔla PVC nkratafa, nneɛma a wɔyɛ, fabrication options ne customized plastic-sheet solutions.

PVC Krataa Mfonini a Wɔde Kɔla Ayɛ

Dɛn Ne UV-Stabilized Kɔla Rigid PVC Krataa?

PVC krataa a ɛyɛ den a ɛwɔ kɔla a wɔde UV ayɛ no yɛ polyvinyl chloride krataa a ɛyɛ den a wɔde nneɛma a ɛma nneɛma yɛ frɔmfrɔm ne nneɛma a ɛma ɛyɛ den a ɛyɛ ultraviolet ayɛ na ama ɔsɛe a owia hann de ba no so atew.

Krataa no betumi ayɛ opaque, translucent anaasɛ transparent na wobetumi ayɛ no wɔ glossy, matte, frosted, embossed anaa customized surfaces.

Adeɛ no ma mfasoɔ rigidity, nnuru a ɛko tia, anyinam ahoɔden insulation ne fabrication adwumayɛ ma nsɛnkyerɛnneɛ, displays, nnwinnadeɛ afã ne paw mfiridwuma dwumadie.

UV stabilization betumi ama kɔla no ayera brɛoo, ayɛ kɔkɔɔ, ayɛ chalking wɔ soro, gloss ne embrittlement a ɛyera, nanso ɛmma PVC aduru biara ntumi nkɔ wim tebea mu daa.

Ɛsɛ sɛ wɔsi abɔnten fata so dua ma kɔla pɔtee, pigment, thickness, UV package, wim tebea ne botaeɛ som berɛ.

UV-Stabilized Kɔla PVC Krataa Nkyerɛkyerɛmu

Ɛsɛ sɛ nkyerɛkyerɛmu a etwa to no kyerɛ sɛnea wɔyɛ no grade a edi mũ, nea wotumi gyina ano kɛse, ne nsusuwii, kɔla a wɔde gyina hɔ ma, gloss, soro, UV ahwehwɛde, wim tebea ho sɔhwɛ, ɔkwan a wɔfa so yɛ ne nea wɔpɛ sɛ wɔde besisi hɔ.

Solid Rigid PVC Krataa vs. PVC Foam Board

Ɛnsɛ sɛ adetɔfo de PVC krataa a ɛyɛ den ne PVC foam board toto ho denam ne kɛse nkutoo so. Krataa mu duru, density, stiffness, fastener retention ne fabrication suban yɛ soronko.

Sɛnea Wɔhwehwɛ UV Ahobammɔ Ho

Ɛsɛ sɛ wɔkyerɛkyerɛ UV a ɛko tia no mu denam adwumayɛ botae ahorow a wotumi susuw so sen sɛ wɔbɛka asɛm a ɛko tia UV wɔ ɔkwan a ɛkɔ akyiri so.

Nneɛma a wɔtaa de kyerɛ sɛnea wim tebea yɛ ntɛmntɛm no bi ne ASTM D4329, ASTM G154 ne ISO 4892-3. Ɛsɛ sɛ amanneɛbɔ no ka kanea no su, hann a ɛhyerɛn, ɔhyew, nsu a ɛyɛ nwini anaa nsu kyinhyia ne bere a wɔde da no nyinaa.

Sɔhwɛ a wɔyɛ no ntɛmntɛm ho wɔ mfaso ma nneɛma a wɔde toto ho nanso ɛnyɛ pɛ tẽẽ mfe dodow bi a wɔahyɛ ato hɔ wɔ abɔnten wɔ wim tebea biara mu.

Kɔla a Wɔpaw ma Abɔnten PVC Nkratafa

Pigment chemistry ka kɔla a ɛgyina pintinn, UV a ɛtwetwe, ɔhyew a ɛboaboa ano ne bere tenten a ɛda adi.

Mpɛn pii no, kɔla fitaa ne hann ntwe owia hyew pii sen kɔla tuntum. Nkratafa tuntum, bruu tuntum, ahabammono tuntum ne kɔkɔɔ tuntum tumi du ɔhyew a ɛkɔ soro wɔ soro wɔ owia hann tẽẽ ase.

Krataa hyew a ɛkorɔn betumi ama ɔhyew ntrɛwmu, bowing, fastener stress ne dimensional movement akɔ soro.

Ɛsɛ sɛ abɔnten so nnwuma kyerɛ kɔla, sɛnea wɔde besisi hɔ, panel no nsusuwii, mmoa ntam kwan, tokuru a wɔbɛtew, ɔhyew a wɔhwɛ kwan ne ɔsom bere a wɔde asi wɔn ani so.

Ɛnsɛ sɛ wɔde nea efi wim tebea mu ba ma kɔla biako no gu kɔla anaa sunsuma foforo so ara kwa.

Nwoma tintim ne Nsɛnkyerɛnneɛ Dwumadie

Wobetumi de PVC nkrataa a ɛwɔ kɔla a ɛyɛ torotoro ayɛ nsɛnkyerɛnne a wɔatintim, ɔyɛkyerɛ mfonini, aguadidan mu nneɛma a wɔde kyerɛ, akwankyerɛ nsɛnkyerɛnne ne nsɛm a wɔde hyɛ nkurɔfo nkuran.

Ɛsɛ sɛ wɔsɔ tintim hwɛ wɔ ɔfasu pɔtee, kɔla ne production batch no so. Ebia substrates a ɛyɛ tumm behia ink fitaa anaasɛ opaque primer layer.

Nneɛma a Wɔyɛ ne Thermoforming

• Fa saw blades a ano yɛ nnam, routers, milling tools ne drills a wɔayɛ ama plastic sheet di dwuma.

• Boa krataa no bere a wɔreyɛ mfiri no na ama wosow, chipping ne edge damage so atew.

• Ma kwan ma kwan a ɛfata twa abɔnten so ntokuru ho hyia ma ɔhyew ntrɛwmu.

• Kwati sɛ wobɛkyekyere nneɛma a wɔde kyekyere nneɛma mu den dodo, titiriw wɔ abɔnten nnua akɛse so.

• Fa ɔhyew ne nkuku tebea a ɛfata di dwuma ma vacuum anaa nhyɛso a ɛyɛ.

• Si kɔla ne gloss retention so dua bere a woayɛ thermoforming akyi.

• Fa welding abaa a ɛne PVC hyia, adhesives ne solvent cements di dwuma.

• Sɔ adhesive no hwɛ wɔ kɔla pɔtee, ne soro ne UV formulation no so.

• Ma mframa bere a ɔhyew, welding ne ɔhyew fabrication.

• Mfa laser twa anaa laser engraving mfiri a ɛyɛ mpapahwekwa nni dwuma mma PVC.

Nneɛma a Wɔyɛ

HSQY de extrusion anaa kalenda di dwuma sɛnea wɔapaw ne kɛse, ne tɛtrɛtɛ, ne soro ne nea wɔayɛ no kwan so.

Raw Material ne Kɔla a Wɔde Di Dwuma

Wɔkari PVC resin, stabilizers, pigments, processing aids, impact modifiers ne application-specific UV additives na wɔde fra sɛnea wɔayɛ no a wɔapene so no.

Extrusion anaa Kalenda a Wɔde Di Dwuma

Wɔde ɔhyew, nhyɛso, nhama ahoɔhare ne roller tebea a wɔahyɛ so na ɛyɛ aduru no ho adwuma ma ɛyɛ krataa anaa sini.

Surface Finishing a Wɔde Awie

Wobetumi ayɛ nea ɛwɔ soro no fɛfɛɛfɛ, ayɛ no matte-finished, frosted anaasɛ embossed sɛnea nneɛma gyinapɛn a wɔapene so no kyerɛ.

Onwini ne Nsusuwii a Wɔde Di Dwuma

Controlled cooling boa ma thickness uniformity, flatness, trɛw ne dimensional stability.

Twitwa, Winding ne Nhwehwɛmu

Wɔtwitwa ade no mu nkratafa anaasɛ wɔde kuru mu yɛ no nhoma mmobɔwee, wɔhwehwɛ mu na wɔhyehyɛ no sɛnea ahyɛde a wɔapene so no kyerɛ.

PVC Nkratafa a Ɛyɛ Kɔla a Ɛyɛ Den a Wɔde Di Dwuma

• Abɔnten nsɛnkyerɛnne: Nsɛnkyerɛnne a ɛkyerɛ kwan, ahobammɔ ho nsɛnkyerɛnne ne nsɛm a wɔde di dwuma a wɔde UV-stable grade a wɔagye atom di dwuma.

• Dawurubɔ a wɔbɔ wɔ dan mu: Nkyerɛwde a wɔatintim, nsɛnkyerɛnne a wɔde hyɛ nkurɔfo nkuran ne mfonini ahorow a wɔde kyerɛ.

• Retail displays: POP displays, nneɛma a wɔde kura nneɛma, shelf afã horow ne branded fixtures.

• Mfinimfini ntama: Afɛfɛde ɔfasu panels, mpaapaemu ne supported surface panels.

• Thermoformed components: Wɔayɛ nkataso, adan, tray ne nneɛma a wɔde kyerɛ.

• Industrial fabrication: Nnwinnade panels, awɛmfo, liners ne plastic afã horow a wɔayɛ.

• Nnuru nnwinnade: Wɔapaw tank, ducts ne liners a wɔde mfiridwuma mu grade a wɔapene so ne nnuru a ɛko tia nhwehwɛmu di dwuma.

• Electrical applications: Insulating panels ne nneɛma a wɔde yɛ adwuma a ɛhwɛ anyinam ahoɔden ne ogyaframa so.

• Templates ne patterns: Templates a ɛwɔ kɔla a ɛtra hɔ kyɛ, akwankyerɛ a wɔde twa ne nneɛma a ɛboa ma wɔyɛ.

Mfiridwuma ne Nnuru a Wɔde Di Dwuma

Wɔde PVC a ɛyɛ den di dwuma wɔ nnuru a wɔde yɛ adwuma ne nsuo a wɔde yɛ adwuma a wɔapaw mu ɛfiri sɛ ɛtumi gyina acid, alkalis ne nkyene a wɔde yɛ adwuma pii ano.

Nnuru a ɛko tia no gyina ade pɔtee, dodow, ɔhyew, nhyɛso, bere a wɔde da adi, mfiri nhyɛso ne welding kwan so.

Ɛnsɛ sɛ wɔde krataa a ɛwɔ kɔla a ɛyɛ aguade ho dawurubɔ a wɔde di dwuma wɔ ɔkwan a ɛkɔ akyiri so di dwuma ara kwa ma nnuru a wɔde gu mu, mfiri a wɔde yɛ anyinam ahoɔden anaa nsu a wɔnom nhyehyɛe.

Ɛsɛ sɛ nnwumayɛbea ahorow de PVC-U krataa a wɔatu ho ama a wɔde nnuru ayɛ a ɛwɔ nnuru a ɛne ne ho hyia, weldability ne bere tenten som tebea horow a wɔakyerɛw ho asɛm di dwuma.

Ogya-Retardant, Antistatic ne Nneɛma Titiriw

Aduan-Nkitahodi ne Aduruyɛ mu Nneɛma a Wɔde Di Dwuma

Ɛnsɛ sɛ wɔka PVC krataa a ɛwɔ kɔla a wɔde UV ayɛ a wɔahyɛ da ayɛ no ho asɛm ara kwa sɛ ɛyɛ nea ahobammɔ wom wɔ aduan a wɔde di nkitaho anaasɛ aduruyɛ mu.

Aduan a wɔde di nkitaho a ɛfata no gyina PVC resin, stabilizers, pigments, additives, nneɛma a wɔasan de adi dwuma, aduan ko, bere a wɔde di nkitaho, ɔhyew ne baabi a wɔrekɔ gua so.

Ebia aduruyɛ mu dwumadie bɛhwehwɛ sɛ wɔde nneɛma a wɔde yɛ adwuma a wɔahyɛ so, hwehwɛ a wɔbɛtumi ahwehwɛ, ahotew, biocompatibility ho nsɛm, sterilization sɔhwɛ ne finished-product validation.

Ɛsɛ sɛ adetɔfo de mmara ne sɔhwɛ ahwehwɛde pɔtee ma ansa na wɔapaw aduan a wɔde di nkitaho anaa aduruyɛ mu PVC a ɛyɛ soronko.

Sɔhwɛ ahorow a Wɔkamfo Kyerɛ a Wɔde Hwɛ Nneɛma a Ɛyɛ Paara So

• PVC resin, stabilizer, pigment ne additive nokwaredi.

• Thickness ne thickness a wotumi gyina ano.

• Krataa tenten, ne tɛtrɛtɛ ne diagonal tolerance.

• Flatness, bow, curl ne ano tebea.

• Density ne krataa-mu duru ho adansedi.

• Kɔla susuw ne kɔla nsonsonoe a ɛwɔ batch-to-batch mu.

• Gloss, matte level ne surface-texture a ɛyɛ pɛpɛɛpɛ.

• Nsonsonoe tuntum, gel, ntokuru, nsu a ɛsen, nsensanee ne efĩ.

• Tensile ahoɔden, elongation ne modulus baabi a wɔakyerɛ.

• Nsunsuansoɔ ahoɔden ne awɔw-nsunsuansoɔ adwumayɛ wɔ baabi a ɛhia.

• Vicat softening ne ɔhyew-deflection adwumayɛ.

• Nsakrae a ɛba afã horow mu bere a wɔde ɔhyew ahyɛ mu akyi.

• UV a ɛda adi, kɔla nsonsonoe ne gloss a ɛkora so.

• Weathered impact anaasɛ tensile-agyapade a ɛkora so.

• Printing adhesion ne abrasion a ɛko tia.

• Thermoforming, bending, welding ne bonding sɔhwɛ ahorow.

• Nnuru a ɛko tia sɔhwɛ ahorow a wɔde di dwuma wɔ mfiridwuma mu.

• Surface-resistance sɔhwɛ ahorow a wɔde hwehwɛ antistatic grades.

• Ɔhyew ho sɔhwɛ ahorow a wɔde hwehwɛ ogya a ɛmma ogya ntumi nhyew.

• Packing, pallet ne container-loading nhwehwɛmu.

Amanne Kɔla PVC Krataa a Wɔpaw

• Standard krataa no mu duru fi bɛyɛ 0.21mm kosi 6.5mm.

• Wɔapaw thin-film nkyerɛkyerɛmu fi bɛyɛ 0.06mm.

• Nkratafa a ne kɛse yɛ 700 × 1000mm, 915 × 1830mm ne 1220 × 2440mm.

• Custom krataa dimensions ne cut-to-size asinasin.

• Kɔla fitaa, tuntum, kɔkɔɔ, kɔkɔɔ, ahabammono, bruu ne kɔla ahorow a wɔayɛ no sɛnea wɔpɛ.

• Opaque, translucent na transparent kɔla nneɛma.

• RAL, Pantone ne honam fam-nhwɛsode kɔla a ɛne ne ho hyia.

• Glossy, matte, frosted ne embossed soro.

• Indoor, UV-stabilized ne application-specific abɔnten grades.

• Ntintim, thermoforming ne mfiridwuma-fabrication grades.

• Nnuru a wɔayɛ mu nsakrae wɔ nkɛntɛnso, a ogya ntumi nhyew ne nea ɛko tia ɔyare mmoawa.

• Sini a ɛbɔ ho ban wɔ ɔfã biako anaa abien no nyinaa wɔ baabi a ɛfata wɔ mfiridwuma mu.

• Amanneɛbɔ nkyerɛwde, pallets, nneɛma a wɔde kyekyere ne nneɛma a wɔde mena agyiraehyɛde.

Nsɛm a Ɛho Hia ma PVC Krataa Quote

• Wɔhwehwɛ sɛ ɛyɛ kɛse na ɛyɛ nea wotumi gyina ano.

• Krataa anaa nhoma mmobɔwee nsusuwii a wɔhwehwɛ.

• Solid sheet anaa PVC adansi foforo.

• Opaque, translucent anaasɛ transparent anim.

• Kɔla a wɔhwehwɛ, RAL, Pantone anaa honam fam nhwɛsode.

• Glossy, matte, frosted anaasɛ embossed soro.

• Wɔde di dwuma wɔ dan mu anaa abɔnten.

• Ɔman a wɔrekɔ ne wim tebea.

• Bere a wɔhwɛ kwan sɛ wɔbɛyɛ wɔ abɔnten so.

• UV-weathering gyinapɛn a wɔhwehwɛ ne nnɔnhwerew a wɔde da adi.

• Nsonsonoe a ɛsen biara a ɛwɔ kɔla mu, yellowing anaa gloss-loss anohyeto.

• Ntintim, twa, thermoforming, welding anaa bonding nhyehyɛe.

• Nsunsuansoɔ, ogyaframa, antistatic anaa nnuru a ɛhia.

• Protective-film ahwehwɛde.

• Sɔhwɛ amanneɛbɔ ne nkrataa a wɔde di mmara so a wɔhwehwɛ.

• Mfiase no dodow a wɔkra ne afe afe ahwehwɛde a wɔasusuw ho.

• Packing, destination port ne da a wɔhwehwɛ sɛ wɔde bɛkɔ.

Send Wo Kɔla PVC Krataa Ahwehwɛde

PVC Data Nkrataa ne Sɔhwɛ Amanneɛbɔ a ɛfa ho

Kratafa a edi kan no kura PVC data nkrataa pii ne sɔhwɛ amanneɛbɔ ahorow. Wɔde asie ase hɔ sɛ nkrataa a wɔde kyerɛw nsɛm a ɛfa ho.

Nwoma bi fa film a emu da hɔ, gray board, offset-printing sheet anaa PVC ade foforɔ ho. Ansa na wode amanneɛbɔ bedi dwuma no, si so dua sɛ ne nsusuwii, ne kɔla, ne kɛse, beae a wɔyɛ ne sɔhwɛ nhwɛsode no fa PVC krataa a ɛwɔ kɔla pɔtee a UV-stabilized a wɔretɔ no ho.

   PVC Clear Krataa Data Krataa

   PVC Rigid Sheet a ɛtumi hyew

   PVC Grey Board Sɔhwɛ Amanneɛbɔ

   PVC Clear Film Data Krataa a Wɔde Di Dwuma

   PVC Krataa Sɔhwɛ Amanneɛbɔ

   20mm Grey Board Sɔhwɛ Amanneɛbɔ

   PVC Krataa a wɔde yɛ Offset Printing Sɔhwɛ Amanneɛbɔ

Nneɛma a Wɔde Gu Nneɛma Mu ne Nea Wɔde Kɔma

Nhwɛsode a wɔde kyekyere nneɛma: Wobetumi de PE bag abɔ A4 nkrataa ne kɔla swatches ho ban na wɔde ahyɛ nnaka a wɔde mena mu.

Nkratafa a wɔde kyekyere: Wobetumi de PE film anaa kraft krataa abɔ PVC nkratafa a ɛyɛ tratraa ho na wɔde ntama a ɛyɛ den abɔ ho ban.

Roll packing: Wobetumi de ahobammɔ film ne kraft krataa abɔ PVC rolls a ɛyɛ tratraa ho atwa reference 76mm krataa core ho ahyia.

Fam ahobammɔ: Wobetumi aka ɔfã biako anaa ɔfã abien ahobammɔ film ho asɛm ama nkratafa a ɛhyerɛn a ɛhwehwɛ sɛ wɔbɔ ho ban fi nsensanee ho.

Pallet packing: Wobetumi de nkratafa ahyɛ plywood anaasɛ fumigation-free export pallets a ɛwɔ anoano ahobammɔ, straps ne stretch film.

Nneɛma a wɔde kyekyere nneɛma a wɔahyɛ da ayɛ: Wɔde ankorankoro nkyerɛwde, ahyɛnsode ahorow a wɔatintim, barcode ne agyiraehyɛde ahorow a wɔayɛ ama nneɛma a wɔde mena no wɔ hɔ.

Container loading: Loading dodow gyina thickness, sheet dimensions, pallet design, roll diameter ne mmara kwan so container-weight anohyeto ahorow so.

Production lead time: Standard production taa hwehwɛ bɛyɛ nnafua 7-15 wɔ kɔla, formulation, specification, sample, packing ne deposit akyi.

Adansedi nkrataa ne Nwoma a Wɔde Di Dwuma

Nwoma a ɛwɔ hɔ no betumi ayɛ mfiridwuma ho nsɛm nkrataa, ahobanbɔ ho nsɛm nkrataa, nneɛma a wɔabara ho amanneɛbɔ, honam fam agyapadeɛ ho amanneɛbɔ, UV-wim tebea ho amanneɛbɔ, ogya a ɛtumi hyew ho amanneɛbɔ ne adansedie a ɛfa nneɛma a ɛyɛ papa ho.

Ɛsɛ sɛ wɔhwɛ krataa biara mu hwɛ sɛnea wɔayɛ no pɛpɛɛpɛ, kɔla, ne kɛse, ne soro, beae a wɔyɛ ne sɔhwɛ nhwɛsode.

Ɛsɛ sɛ wɔkyerɛkyerɛ SGS mu sɛnea sɔhwɛ no kɛse te na ɛnsɛ sɛ wɔde ma sɛ amansan nyinaa nneɛma ho adansedi krataa.

ISO 9001 fa ahyehyɛdeɛ bi nhyehyɛeɛ a ɛhwɛ nneɛma pa so na ɛnyɛ nea ɛde ne ho nhyɛ UV a ɛko tia, ogya adwumayɛ, aduane ahobanbɔ anaa nnuru a ɛne ne ho hyia.

Ɛsɛ sɛ wɔhwɛ adansedie krataa no wura, beaeɛ a wɔyɛ, standard edition, scope ne validity time ansa na wɔatintim.

HSQY Wiase Nyinaa Nneɛma a Wɔde Kyerɛkyerɛ

Dɛn Nti na Wopaw HSQY sɛ Wo Kɔla PVC Krataa a Wɔde Ma?

• Solid kɔla rigid PVC nkrataa a wɔde tintim, nsɛnkyerɛnne ne fabrication.

• Standard thicknesses fi bɛyɛ 0.21mm kosi 6.5mm.

• Standard ne customized krataa nsusuwii.

• Opaque, translucent na transparent kɔla ahorow a wɔpaw.

• RAL, Pantone ne honam fam-nhwɛsode kɔla a ɛne ne ho hyia.

• Glossy, matte, frosted ne embossed a wɔde wie.

• Indoor ne application-specific UV-stabilized abɔnten grades.

• Ntintim, thermoforming ne mfiridwuma mu fabrication grades.

• Nhwɛsode ma kɔla, UV, tintim ne fabrication nhwehwɛmu.

• Quality inspection atia samples ne specifications a wɔapene so.

• Customized packaging ne amanaman ntam po so hyɛn mmoa.

Ansa na wɔbɛyɛ pii no, HSQY kamfo kyerɛ sɛ wɔmfa adetɔfo no ankasa tintim, twa, yɛ, bonding, welding ne abɔnten installation tebea horow nsɔ PVC krataa a wɔapaw no hwɛ.

Di HSQY nkitaho na woanya Nhwɛsode ne Bo

Nsɛmmisa a Wɔtaa Bisa Fa PVC Nkratafa a Wɔde Kɔla Ayɛ a Wɔde UV Agyina Hɔ Ho

Dɛn ne PVC krataa a ɛyɛ den a ɛwɔ kɔla?

Ɛyɛ PVC krataa a ɛyɛ den a ɛnyɛ ahuru a wɔde aduru a wɔde kɔla ayɛ na ɛyɛ ade a ɛyɛ kɔla a ɛnyɛ hann, ɛyɛ hann anaasɛ ɛyɛ mmerɛw.

Dɛn na PVC a wɔde UV ahyɛ mu den kyerɛ?

Ɛkyerɛ sɛ nnuru no kura nneɛma a wɔde ka ho a wɔapaw sɛ ɛbɛtew owia hann a ɛbata ho a ɛyera, ɛyɛ kɔkɔɔ, ɛhyerɛn a ɛyera ne nea ɛyɛ mmerɛw.

So PVC a UV ahyɛ mu den no tumi gyina wim tebea ano daa?

Dabi Abɔnten so adwumayɛ gyina sɛnea wɔayɛ, kɔla, ne kɛse, wim tebea, nea wɔde besisi hɔ, akwankyerɛ a wɔde da no adi ne bere a wɔhwehwɛ sɛ wɔde yɛ adwuma no so.

So wobetumi de kɔla biara adi dwuma wɔ abɔnten?

Ɛsɛ sɛ wɔsɔ kɔla biara hwɛ wɔ ɔkwan soronko so efisɛ kɔla ahorow no nya UV a ɛgyina pintinn, ɔhyew a ɛtwetwe ne kɔla a ɛkora so so nkɛntɛnso.

So PVC ntama a ɛyɛ tumm no yɛ hyew kɛse wɔ abɔnten?

Mpɛn pii no, kɔla tuntum twetwe owia mu hyew pii sen kɔla fitaa anaa hann, na ebetumi ama ɔhyew a ɛtrɛw ne panel no hyew akɔ soro.

Ɔkwan bɛn so na wɔsɔ UV ahoɔden a ɛko tia no hwɛ?

Sɔhwɛ betumi de ASTM D4329, ASTM G154, ISO 4892-3 anaa ɔkwan a wɔapene so adi dwuma, a wɔasusuw kɔla, hyerɛn, kɔkɔɔ ne mfiri-agyapade a wɔkora so ho.

So nnɔnhwerew 1000 a wɔde yɛ UV sɔhwɛ no ne mfe dodow bi a wɔahyɛ ato hɔ a wɔde yɛ abɔnten so no yɛ pɛ?

Dabi, wɔde sɔhwɛ a wɔyɛ no ntɛmntɛm di dwuma titiriw de toto nneɛma ho wɔ tebea horow a wɔahyɛ so mu na ɛnyɛ pɛ tẽẽ bere koro no ara wɔ abɔnten wɔ wim tebea biara mu.

Nneɛma a ɛyɛ den bɛn na ɛwɔ hɔ?

Standard krataa no mu duru firi bɛyɛ 0.21mm kɔsi 6.5mm. Thiner specifications a wɔapaw no betumi aba fi bɛyɛ 0.06mm.

Nkratafa akɛse a wɔahyɛ da ayɛ bɛn na ɛwɔ hɔ?

Nsusuwii a ɛyɛ gyinapɛn no bi ne 700 × 1000mm, 915 × 1830mm ne 1220 × 2440mm.

So wobetumi ayɛ krataa no nsusuwii a wɔahyɛ da ayɛ?

Aane. Wobetumi ayɛ amanne nsusuwii ne asinasin a wɔatwa no kɛse wɔ ntrɛwmu ne nnwinnade anohyeto a ɛfata mu.

Kɔla ahorow bɛn na ɛwɔ hɔ?

Kɔla ahorow a wɔde di dwuma daa no bi ne fitaa, tuntum, kɔkɔɔ, kɔkɔɔ, ahabammono ne bruu. Wobetumi de kɔla afoforo ahyia ne nkyerɛkyerɛmu a wɔapene so.

So HSQY betumi ne RAL anaa Pantone kɔla ahyia?

Aane. Wobetumi asusuw RAL, Pantone anaa physical-sample matching ho sɛnea pigment a ɛwɔ hɔ ne minimum order dodow te.

So PVC nkratafa a ɛwɔ kɔla a ɛda adi pefee wɔ hɔ?

Aane. Wobetumi ayɛ kɔla ahorow a ɛyɛ mmerɛw na ɛyɛ hann a ɛhwɛ aniwa ne ne kɛse so.

So saa PVC krataa yi ne PVC foam board yɛ pɛ?

Dabi, saa ade yi yɛ PVC krataa a ɛyɛ den a ɛyɛ den. PVC foam board wɔ cellular core a emu yɛ hare na ne density a ɛba fam kɛse.

So wobetumi atintim PVC nkrataa a ɛwɔ kɔla ahorow?

Wobetumi atintim nneɛma a ɛfata wɔ screen so, wɔatintim UV inkjet anaasɛ wɔatintim UV offset wɔ ink-adhesion ne curing sɔhwɛ ahorow akyi.

So wobetumi de mfonini a ɛyɛ hann atintim PVC nkrataa a ɛyɛ tumm?

Yiw, nanso ebia ɛho behia sɛ wɔde ink fitaa anaasɛ opaque primer layer di dwuma na amma substrate kɔla no annya mfonini no so nkɛntɛnso.

So wobetumi ayɛ PVC krataa a ɛwɔ kɔla ahorow no thermoformed?

Grade a wɔapene so betumi ayɛ vacuum anaa nhyɛso a wɔayɛ bere a wɔasɔ ɔhyew, nkuku, twetwe bun ne onwini tebea horow ahwɛ akyi.

So kɔla no sesa bere a wɔayɛ no thermoforming akyi?

Sɛ wɔtrɛw mu kɔ akyiri a, ebetumi atew ne kɛse so na asakra kɔla, gloss anaa opacity a ɛda adi wɔ mmeae a wɔayɛ no kɛse. Wɔkamfo kyerɛ sɛ wɔnsɔ nneɛma a wɔyɛ no hwɛ.

So wobetumi de PVC krataa no akɔ CNC kwan so?

Aane. Fa nnwinnade a ano yɛ nnam, aduan dodow a ɛfata, krataa a wɔde gyina so ne nea woyi fi mu a ɛfata ma plastic mfiri di dwuma.

So wobetumi atwa PVC krataa no laser?

Wɔnkamfo nkyerɛ sɛ wɔmfa laser ntwitwa na wɔmfa nkyerɛw nneɛma a ɛyɛ mmerɛw efisɛ PVC betumi ama mframa anaa mfutuma a ɛyɛ hu aba. Wɔkamfo kyerɛ sɛ wɔmfa mfiri ntwitwa.

So krataa no ntumi nkɔ nsu mu?

PVC a ɛyɛ den no ntumi nnye nsuo pii na ɛko tia nsuo a ɛkɔ mu daa, nanso nhyehyɛeɛ a wɔde ahyɛ mu awie no gyina nkwaa, fasteners, anoano ne sealing so.

So krataa no tumi gyina nnuru ano?

PVC ntumi gyina nnuru pii ano, nanso ɛsɛ sɛ wɔhwɛ sɛnea ɛne ne ho hyia hwɛ sɛnea nnuru no pɛpɛɛpɛ, ne dodow, ɔhyew ne bere a wɔde hyɛ mu.

So wobetumi de PVC a ɛwɔ kɔla a wɔahyɛ da ayɛ adi dwuma de ayɛ nnuru a wɔde gu nsukorabea?

Ɛnsɛ sɛ wɔde sɛnkyerɛnne anaa ahosiesie grade a wɔde di dwuma wɔ ɔkwan a ɛkɔ akyiri so di dwuma ara kwa ma nnuru a wɔde gu mu. Wɔhwehwɛ sɛ wonya mfiridwuma mu PVC-U grade a wɔatu wɔn ho ama ne mfiridwuma mu nhwehwɛmu.

So PVC krataa a ɛwɔ kɔla ahorow no ntumi nhyew?

Ɛnsɛ sɛ wɔka ho asɛm sɛ ogya ntumi nhyew koraa. Ɛsɛ sɛ wɔde sɔhwɛ amanneɛbɔ a ɛkyerɛ ne grade, kɔla ne ne kɛse pɔtee boa ogyaframa adwumayɛ.

So antistatic grade wɔ hɔ?

Wobetumi asusuw antistatic aduru bi ho sɛnea ɛho hia sɛ ɛko tia ɔfasu, ɔhyew, bere tenten ne sɛnea wɔde di dwuma.

So PVC krataa no fata ma aduan a wɔde kyekyere nneɛma?

Ɛnsɛ sɛ wɔde UV krataa a ɛwɔ kɔla a wɔahyɛ da ayɛ no di dwuma ara kwa ma aduan a ɛne wɔn ho di nkitaho. Wɔhwehwɛ sɛ wɔyɛ nhyehyɛe a wɔatu ho ama ne baabi a wɔrekɔ-gua ho nkrataa.

So wobetumi de PVC a ɛwɔ kɔla ayɛ nnuruyɛ mu nneɛma?

Aduruyɛ mu dwumadie hwehwɛ sɛ wɔde abasobɔdeɛ a ɛfata ne nneɛma a wɔde yɛ adwuma, ahotew, nea wɔtumi hwehwɛ ne nneɛma a wɔawie ho ahwehwɛdeɛ ho adansedie.

So sini a ɛbɔ ho ban wɔ hɔ?

Wobetumi asusuw ɔfã biako anaa ɔfã abien ahobammɔ sini ho ama glossy krataa nkyerɛkyerɛmu a wɔapaw.

Dɛn ne dodow a ɛba fam koraa a wɔkra?

Standard kɔla ne specifications taa wɔ MOQ bɛyɛ 1000kg. Kɔla ahorow a wɔahyɛ da ayɛ anaa UV nnuru titiriw betumi ahwehwɛ bɛyɛ 3000kg.

So nhwɛsode ahorow wɔ hɔ?

Ebia A4 nkrataa ne kɔla ahorow a ɛwɔ hɔ dedaw no wɔ hɔ. Ebia UV anaa kɔla nhwɛsode ahorow a wɔayɛ no sɛnea wɔpɛ no behia sɛ wɔyɛ nhyehyɛe a wɔde sɔ hwɛ.

Dɛn ne bere a wɔde yɛ adwuma no?

Standard production taa hwehwɛ bɛyɛ nnafua 7-15 wɔ kɔla, formulation, specification, nhwɛsode, packaging ne deposit akyi.

Nsɛm bɛn na wɔhwehwɛ na wɔafa aka asɛm?

Fa ne kɛse, ne kɛse, ne kɔla, ne soro, ne dan mu anaa abɔnten so de di dwuma, UV sɔhwɛ, ɔkwan a wɔfa so yɛ adwuma, nneɛma titiriw, dodow, nneɛma a wɔde kyekyere ne baabi a wɔrekɔ no ma.

Nya Custom Kɔla PVC Krataa Quote

Ɛfa HSQY Plastic Kuw ho

HSQY Plastic Kuw no de kɔla ahorow a ɛyɛ den PVC nkrataa, PVC nkrataa a emu da hɔ, PVC nkrataa a wotumi tintim, PVC sini, PET nkrataa, PP nkrataa ne plastic nneɛma a wɔayɛ no sɛnea wɔpɛ ma amanaman ntam B2B adetɔfo.

HSQY boa nsɛnkyerɛnne ayɛfo, tintimfo, ɔyɛkyerɛ nnwumakuw, plastic fabricators, thermoforming nnwumakuw, mfiridwuma processors, importers ne distributors ne kɔla a ɛne ne ho hyia, nhwɛsode sɔhwɛ, customized production, quality nhwehwɛmu ne export packing.

Bisa Quote ne Nhwɛsode