PVC ƒe agbalẽ si le amadede vovovowo me kple UV Takpɔkpɔ

UV-Stabilized Amadede Sesẽ PVC ƒe Agbalẽ

HSQY wɔa UV-stabilized colored rigid PVC agbalẽ dzi nyawo s na gota kple xɔme dzesiwo, nukpɔkpɔ siwo wota, gli ƒe nutsyɔnu, atsyɔ̃ɖonuwo, akpa siwo wotsɔ dzoxɔxɔ wɔe, dɔwɔnuwo ƒe nutsyɔnu kple dɔwɔƒewo ƒe wɔwɔme.

Nusi wotsɔ wɔe nye nu sesẽ si me futukpɔ mele o si sesẽ PVC agbalẽ dzi nyawo si le amadede siwo me mekɔ o, siwo me kɔ eye wodzena nyuie me. Amadede siwo wozãna ɖaa dometɔ aɖewoe nye ɣi, yibɔ, dzĩ, ɣi, amadede dzẽ kple blɔ, esime woate ŋu atsɔ amadede siwo wowɔ ɖe ɖoɖo nu asɔ kple wo nɔewo le kpɔɖeŋu ŋutɔŋutɔ, RAL ƒe nufiame, Pantone ƒe nufiame alo amadede ƒe dzidzenu si dzi woda asi ɖo nu.

agbalẽ dzi nyawo ƒe titrime siwo woɖo ɖi la tso abe 0.21mm va ɖo 6.5mm ene. PVC film siwo le tsɛ wu kple agbalẽ dzi nyawo s tso abe 0.06mm va ɖo 0.20mm hã ateŋu anɔ anyi le ewɔwɔ ƒe nɔnɔme, sesẽme, kekeme kple dɔwɔwɔ ƒe nudidiwo nu.

agbalẽ dzi nyawo ƒe didime siwo wozãna ɖaa dometɔ aɖewoe nye 700 × 1000mm, 915 × 1830mm kple 1220 × 2440mm. Woateŋu adzro agbalẽ dzi nyawo lolome siwo wowɔ ɖe ɖoɖo nu, kakɛ siwo wotso kple agbalẽ xatsaxatsa ƒe nɔnɔmewo me le ewɔwɔ ƒe kekeme si sɔ gbɔ wu si ade 1280mm me.

Wotsɔa UV takpɔkpɔ naa to atike si wozãna koŋ si me nusiwo naa li ke, amadede kple nusiwo wotsɔ kpe ɖe eŋu siwo sɔ le. Gbedoxɔ me dɔwɔwɔ nɔ te ɖe amadede si wotia, eƒe titrime, yame ƒe nɔnɔme, eɖoɖo, ɣe ƒe keklẽ kple dɔwɔwɔ ƒe agbenɔƒe si wobia dzi.

Mele be woagblɔ amadede si sɔ PVC le eɖokui si be esɔ na gota zazã tegbee, nuɖuɖu ƒe kadodo, atikewɔnuwo, atikewo ƒe tsigoewo, antistatic zazã alo dzo ƒe hatsotso tɔxɛ aɖe o. Dɔbiagbalẽvi siawo bia be woaxɔ dzeside si dzi woda asi ɖo ɖe vovo kple dodokpɔ ŋuti nyatakaka siwo akpe ɖe wo ŋu.

Dzro nu bliboa me HSQY PVC amadede agbalẽ dzi nyawo ƒe didime alo ŋkuléle ɖe eŋu kpee rigid PVC agbalẽ dzi nyawo nusiwo wowɔ.

Bia PVC ƒe Agbalẽ Asixɔxɔ    Bia Amadede kple UV Kpɔɖeŋuwo

Video si le amadede vovovowo me PVC ƒe Agbalẽ

Kpɔ video si le ete be nàto HSQY amadede PVC agbalẽ dzi nyawo s, ewɔwɔ ƒe nɔnɔmewo, wɔwɔ ƒe tiatia kple plastic- agbalẽ dzi nyawo egbɔkpɔnu siwo wowɔ ɖe ɖoɖo nu me.

Amadede PVC ƒe Agbalẽ Nɔnɔmetatawo

Nukae Nye UV-Stabilized Amadede Sesẽ PVC ƒe Agbalẽ ?

Amadede sesẽ si wotsɔ UV-si li ke PVC agbalẽ dzi nyawo nye polyvinyl chloride sesẽ agbalẽ dzi nyawo si wotsɔ amadedewo kple ultraviolet stabilizers wɔe be wòaɖe nusiwo ɣe ƒe keklẽ hena vɛ dzi akpɔtɔ.

agbalẽ dzi nyawo ateŋu anye esi me mekɔ o, si me kɔ alo esi me kɔ eye woateŋu awɔe le nusiwo le keklẽm, matte, frosted, embossed alo customized surfaces me.

Nua naa viɖe sesẽ sesẽ, atikewo ƒe tsitretsitsi, elektrikŋusẽ ƒe xɔxlɔ̃ kple fabrication dɔwɔwɔ na dzesiwo, ɖeɖefiawo, dɔwɔnuwo ƒe akpawo kple tiatiawɔƒewo ƒe dɔwɔwɔ.

UV ƒe liƒo ate ŋu ana amadede naɖiɖi blewu, wòazu ɣie, eƒe gowo nazu chalk, eƒe keklẽ kple eƒe ŋeŋe ƒe bu, gake mena PVC atike ɖesiaɖe nate ŋu anɔ te ɖe yame ƒe nɔnɔme nu tegbee o.

Ele be woaɖo kpe gota gome dzedze dzi na amadede, amadede, titrime, UV package, yame ƒe nɔnɔme kple subɔsubɔ ɣeyiɣi si woɖo be woawɔ.

UV-Stabilized Amadede PVC ƒe Agbalẽ Nɔnɔmewo

Ele be nɔnɔme mamlɛawo nade dzesi atikewɔmɔnu ƒe hatsotso bliboa, eƒe titrime ƒe mɔɖeɖe ɖe nu ŋu, didimewo, amadede ƒe nufiame, keklẽ, anyigba, UV ƒe nudidi, yame ƒe nɔnɔme dodokpɔ, ewɔwɔ ƒe ɖoɖo kple esi woɖo be woaɖoe.

Sesẽ Sesẽ PVC ƒe Agbalẽ kple PVC Foam ƒe Dɔwɔha

Mele be nuƒlelawo atsɔ PVC agbalẽ dzi nyawo kple PVC foam board sesẽ asɔ kple wo nɔewo to eƒe titrime ɖeɖeko zazã me o. Sheet ƒe kpekpeme, density, stiffness, fastener retention kple fabrication nuwɔna to vovo.

Alesi Wodaa UV Takpɔkpɔ Kpɔ

Ele be woaɖe UV ƒe tsitretsitsi gɔme to dɔwɔwɔ ƒe taɖodzinu siwo woate ŋu adzidze me tsɔ wu be woagblɔ nya si tsi tre ɖe UV ŋu le mɔ gbadza nu.

Yame ƒe nɔnɔme ƒe tɔtrɔ kabakaba ƒe nyatakaka siwo bɔ dometɔ aɖewoe nye ASTM D4329, ASTM G154 kple ISO 4892-3. Ele be nyatakakaa nagblɔ akaɖi ƒe ƒomevi, keklẽŋusẽ, dzoxɔxɔ, tsi ƒe ƒoƒo alo tsi ƒe tsatsam kple ɣeyiɣi si katã wòxɔ.

Dodokpɔ kabakaba ɖea vi na nuwo tsɔtsɔ sɔ kple wo nɔewo gake mesɔ kple ƒe xexlẽme aɖe si woɖo ɖi le gota le yame ƒe nɔnɔme ɖesiaɖe me tẽ o.

Amadede Tiatia na Gbedoxɔme PVC ƒe Agbalẽ s

Amadede ƒe atikewɔwɔ kpɔa ŋusẽ ɖe amadede ƒe liƒo, UV ƒe xɔxlɔ̃, dzoxɔxɔ ƒe dzidziɖedzi kple eƒe dzedzeme ɣeyiɣi didi dzi.

Zi geɖe la, amadede ɣi kple keklẽ mexɔa ɣe ƒe dzoxɔxɔ boo o wu amadede viviwo. agbalẽ dzi nyawo s yibɔ, blɔ viviti, amadede dzẽ viviti kple dzĩ dzẽ ateŋu aɖo anyigba ƒe dzoxɔxɔ si kɔkɔ wu gbɔ le ɣe ƒe keklẽ tẽ te.

agbalẽ dzi nyawo ƒe dzoxɔxɔ si kɔ wu ateŋu adzi dzoxɔxɔ ƒe kekeɖenudɔwɔwɔ, tadedeagu, nusi blaa nu ƒe nuteɖeamedzi kple didime ƒe ʋuʋu ɖe edzi.

Ele be gotagome dɔwo nagblɔ amadede, afisi woaɖoe ɖo, akpata ƒe didime, kpekpeɖeŋu ƒe dometsotso, do ƒe ʋuʋu, dzoxɔxɔ ƒe didime si wokpɔ mɔ na kple subɔsubɔɣi si woɖo taɖodzinu na.

Mele be woatsɔ yame ƒe nɔnɔme ƒe nɔnɔme si dona tso amadede ɖeka me asisi ɖe amadede alo vɔvɔli bubu ŋu le eɖokui si o.

Agbalẽtata Kple Dzesiwo Ƒe Dɔwɔɖoɖowo

Woateŋu azã PVC agbalẽ dzi nyawo s siwo ƒe amadede le gbadzaa na dzesi siwo wota, ɖeɖefia ƒe nɔnɔmetatawo, asitsaƒewo ƒe ɖeɖefiawo, mɔfiamedzesiwo kple boblododoɖakawo.

Ele be woado agbalẽtata kpɔ le anyigba ƒe akpa si tututu, amadede kple ewɔwɔ ƒe hatsotso dzi. Ate ŋu abia be woatsɔ nuŋlɔtsi ɣi alo primer layer si me mekɔ o nanɔ anyigba siwo do viviti ŋu.

Fabrication kple Thermoforming

• Zã saw blades ɖaɖɛwo, routers, milling tools kple drills siwo wowɔ na plastic agbalẽ dzi nyawo .

• Do alɔ agbalẽ dzi nyawo le mɔ̃ɖaŋudɔwɔwɔ me be wòaɖe ʋuʋudedi, ʋuʋudedi kple nugbɔ ƒe gbegblẽ dzi akpɔtɔ.

• Ðe mɔ na teƒe si sɔ ƒo xlã do siwo wotsɔ ɖoa ​​gota hena dzoxɔxɔ ƒe kekeɖenudɔwɔwɔ.

• Ƒo asa na nusiwo wotsɔ blaa nu ŋu fũ akpa, vevietɔ le gotagome ʋuƒo gãwo dzi.

• Zã dzoxɔxɔ kple aŋɔ ƒe nɔnɔme siwo sɔ hena yaƒoƒo alo nyaƒoɖeamenu wɔwɔ.

• Kpɔe ɖa be amadede kple keklẽ ƒe léle ɖe te le dzoxɔxɔ ƒe nɔnɔme wɔwɔ vɔ megbe.

• Zã PVC -siwo sɔ kple welding rods, adhesives kple solvent cements.

• Do atike si wotsɔna léa nu ɖe ​​nu ŋu la kpɔ le amadede, eƒe gogloƒe kple UV ƒe wɔwɔme tututu dzi.

• Na ya naƒo le dzoxɔxɔ, welding kple dzoxɔxɔ wɔwɔ me.

• Mègazã laser lãɖeɖe alo laser ƒe nɔnɔmetata dzrowo na PVC o.

Nuwɔwɔ ƒe Dɔwɔna

HSQY zãa extrusion alo calendaring le titrime, kekeme, anyigba kple nusi wowɔ ƒe nɔnɔme si wotia nu.

Nusiwo Wozãna Kple Amadedewo ƒe Tɔtɔ

Wodaa PVC resin, stabilizers, pigments, processing aids, impact modifiers kple UV additives siwo wozãna koŋ eye wotsakaa wo le atike si dzi woda asi ɖo nu.

Extrusion alo Ɣletigbalẽwo wɔwɔ

Wotrɔa asi le atike la ŋu wòzua agbalẽ dzi nyawo alo film to dzoxɔxɔ, nyaƒoɖeamenu, fli ƒe duƒuƒu kple ʋuʋudedi ƒe nɔnɔme siwo dzi wokpɔna zazã me.

Anyigba ƒe Nuwuwu

Woate ŋu awɔ eƒe gowo wòakɔ, awɔ matte-finished, frosted alo embossed le adzɔnu ƒe dzidzenu si dzi woda asi ɖo nu.

Fafa Kple Agbɔsɔsɔme Dzi Kpɔkpɔ

Fafa si dzi wokpɔna kpena ɖe ame ŋu be wòalé titrime ƒe ɖekawɔwɔ, gbadzaa, kekeme kple didime ƒe liƒo me ɖe asi.

Lãɖeɖe, Ʋuʋu kple Dzodzro

Wolãa nusi wowɔ la ɖe agbalẽ dzi nyawo s me alo ƒoa abi ɖe agbalẽ xatsaxatsawo me, léa ŋku ɖe eŋu eye woblanɛ ɖe nudɔdɔ ƒe ɖoɖo si dzi woda asi ɖo nu.

Amadede ƒe Rigid PVC ƒe Agbalẽ s ƒe dɔwɔwɔwo

• Dzesi siwo le gota: Mɔfiamedzesiwo, dedienɔnɔ ƒe dzesiwo kple nyatakakadzraɖoƒe siwo zãa UV-stable grade si ŋu woda asi ɖo.

• Boblododo le xɔ me: Tabla siwo wota, boblododo ƒe dzesiwo kple ɖeɖefia ƒe nɔnɔmetatawo.

• Asitsaƒewo ƒe ɖeɖefiawo: POP ɖeɖefiawo, adzɔnuwo ƒe nudzraɖoƒewo, agbalẽdzraɖoƒe ƒe akpawo kple nusiwo wotsɔ ŋkɔ na.

• Ememe nutsyɔnu: Atsyɔ̃ɖoɖo gli ƒe akpawo, mamawo kple anyigba ƒe akpa siwo wodo alɔe.

• Dzoxɔxɔ ƒe akpa siwo wowɔ: Nutsyɔnu siwo wowɔ, aƒewo, traywo dzi kple nukpɔkpɔ ƒe akpawo.

• Dɔwɔƒewo ƒe wɔwɔme: Dɔwɔnuwo ƒe akpawo, dzɔlawo, liners kple plastic components siwo wowɔ.

• Atikewɔnuwo: Wotia tsigoewo, ducts kple liners to dɔwɔƒewo ƒe dzeside si dzi woda asi ɖo kple atikewo ƒe tsitretsitsi ƒe dodokpɔ zazã me.

• Elektrikŋusẽ zazã: Nusiwo wotsɔ xea mɔ na dzoxɔxɔ ƒe akpawo kple woƒe akpa aɖewo le elektrikŋusẽ kple dzo ƒe nudidiwo nu.

• Templates kple patterns: Templates siwo le amadede vovovowo me siwo nɔa anyi didina, mɔfianu siwo wotsɔ lãa nu kple kpeɖeŋutɔ siwo wotsɔ wɔa woe.

Dɔwɔƒewo Kple Atikewo Zazã

Wozãa PVC sesẽ le atikewo ƒe dɔwɔwɔ kple tsi ƒe dɔwɔwɔ tiatia aɖewo me elabena ateŋu anɔ te ɖe acid, alkali kple dze ƒe tsi geɖe nu.

Atikewo ƒe tsitretsitsi nɔ te ɖe nusi tututu, eƒe agbɔsɔsɔme, dzoxɔxɔ, nyaƒoɖeamenu, ɣeyiɣi si woatsɔ ado goe, mɔ̃ ƒe nuteɖeamedzi kple welding mɔnu dzi.

Mele be woazã agbalẽ dzi nyawo si ƒe amadede nye boblododo ƒe dzesi si bɔ ɖe wo ɖokui si na atikewo ƒe tsigoewo, elektrikŋusẽnamɔ̃wo alo tsinono ƒe ɖoɖowo o.

Ele be dɔwɔƒewo ƒe dɔwo nazã atike ƒe dzeside tɔxɛ PVC -U agbalẽ dzi nyawo si ŋu woŋlɔ atikewo ƒe ɖekawɔwɔ, weldability kple ɣeyiɣi didi ƒe subɔsubɔ ƒe nɔnɔmewo ɖo.

Dzo-Xɔxe, Antistatic kple Dzeside Tɔxɛwo

Nuɖuɖu-Kadodo Kple Atikewɔwɔ Ŋuti Dɔwɔnawo

Mele be woaɖɔ PVC agbalẽ dzi nyawo si ƒe amadede nye UV-si li ke si sɔ la le eɖokui si be enye nuɖuɖu-kadodo dedie alo atikewɔwɔ ƒe dzeside o.

Nuɖuɖu-kadodo ƒe nyonyo nɔ te ɖe PVC aŋɔ, nusiwo naa nu li ke, amadedewo, nusiwo wotsɔ kpe ɖe eŋu, nusiwo wogbugbɔ zã, nuɖuɖu ƒe ƒomevi, kadodo ƒe ɣeyiɣi, dzoxɔxɔ kple asi si woayi dzi.

Atikewɔwɔ me dɔwɔwɔ ate ŋu abia be woatsɔ nu xoxo siwo dzi wokpɔ ŋusẽ ɖo, woate ŋu akpɔ wo yome, woanɔ dzadzɛ, woanya nu tso nugbagbewo ƒe dɔwɔwɔ ɖekae ŋu, woado dɔlékuiwutikewo kpɔ eye woada asi ɖe nusiwo wowɔ vɔ dzi.

Ele be nuƒlelawo nagblɔ sedede kple dodokpɔ ƒe nudidi siwo sɔ hafi atia nuɖuɖu-kadodo alo atikewɔwɔ ƒe PVC ƒe dzesi tɔxɛ aɖe.

Dodokpɔ Siwo Wokafu be Woatsɔ Akpɔ Dzedzeme Dzi

• PVC resin, stabilizer, pigment kple additive ƒe kpeɖodzi.

• Titrime kple titrime ƒe mɔɖeɖe ɖe nu ŋu.

• Sheet ƒe didime, kekeme kple diagonal tolerance.

• Flatness, bow, curl kple nugbɔ ƒe nɔnɔme.

• Density kple agbalẽ dzi nyawo -kpekpeme ƒe kpeɖodzi.

• Amadede dzidzedze kple amadede ƒe vovototo tso hatsotso ɖeka me.

• Gloss, matte level kple anyigba-nɔnɔme ƒe ɖekawɔwɔ.

• Teƒe yibɔwo, gel, dowo, sisi ƒe dzesiwo, ƒoƒo kple ɖiƒoƒo.

• Tensile ŋusẽ, didime kple modulus le afisi wogblɔe le.

• Ŋusẽkpɔɖeamedzi ƒe ŋusẽ kple vuvɔ-ŋusẽkpɔɖeamedzi ƒe dɔwɔwɔ le afisi wòhiã le.

• Vicat ƒe fafa kple dzoxɔxɔ-ʋuʋu ƒe dɔwɔwɔ.

• Dimension ƒe tɔtrɔ le dzoxɔxɔ ƒe dodo vɔ megbe.

• UV ƒe ɖeɖefia, amadede ƒe vovototo kple keklẽ ƒe léle ɖe te.

• Yame ƒe nɔnɔme ƒe ŋusẽkpɔɖeamedzi alo tensile-property retention.

• Agbalẽtata ƒe adhesion kple abrasion tsitretsitsi.

• Thermoforming, bending, welding kple kadodo dodokpɔwo.

• Dodokpɔ siwo wowɔna tsɔ tsi tre ɖe atikewo ŋu hena dɔwɔƒewo zazã.

• Dodokpɔ siwo wowɔna tsɔ tsi tre ɖe anyigba ŋu hena antistatic grades.

• Dzoxɔxɔ ƒe dodokpɔwo hena dzesi siwo me dzo mele o.

• Packing, pallet kple nugoe-agbawo me dzodzro.

Amadede si Wotrɔ Asi Le PVC ƒe Agbalẽ Tiatiawɔblɔɖe

• agbalẽ dzi nyawo ƒe titrime siwo woɖo ɖi tso abe 0.21mm va ɖo 6.5mm ene.

• Tiatia thin-film ƒe nɔnɔmewo tso abe 0.06mm ene.

• 700 × 1000mm, 915 × 1830mm kple 1220 × 2440mm agbalẽ dzi nyawo s.

• agbalẽ dzi nyawo ƒe didime siwo wowɔ ɖe ɖoɖo nu kple kakɛ siwo wotso ɖe woƒe lolome nu.

• Amadede ɣi, yevu, dzĩ, ɣi, amadede dzẽ, blɔ kple esiwo wowɔ ɖe ɖoɖo nu.

• Nusiwo ƒe amadede me mekɔ o, siwo me kɔ eye wo me kɔ.

• RAL, Pantone kple physical-sample amadede ƒe sɔsɔ.

• Glossy, matte, frosted kple embossed anyigbawo.

• Xɔme, UV-si li ke kple dɔwɔwɔ-koŋ gota dzesiwo.

• Agbalẽtata, dzoxɔxɔ ƒe nɔnɔmewɔwɔ kple dɔwɔƒewo ƒe wɔwɔme ƒe dzesiwo.

• Atike siwo ŋu wotrɔ asi le le ŋusẽkpɔɖeamedzi ŋu, esiwo me dzo mele o kple esiwo tsi tre ɖe dɔlékuiwo ŋu.

• Film si kpɔa ame ta le akpa ɖeka alo evea siaa dzi le afisi wòsɔ le le mɔ̃ɖaŋununya nu.

• Dzesi siwo wowɔ ɖe ɖoɖo nu, pallets, nubablɛwo kple wo ɖoɖoɖa ƒe dzesiwo.

Nyatakaka Siwo Hiã Na PVC ƒe Agbalẽ Nyayɔyɔ

• Wobia be wòanye titrime kple mɔɖeɖe ɖe nu ŋu.

• agbalẽ dzi nyawo alo agbalẽ xatsaxatsa ƒe didime siwo hiã.

• agbalẽ dzi nyawo sesẽ alo PVC xɔtutu bubu.

• Dzedzeme si me mekɔ o, si me kɔ alo si me kɔ.

• Amadede si hiã, RAL, Pantone alo ŋutilã me kpɔɖeŋu.

• Glossy, matte, frosted alo embossed anyigba.

• Xɔme alo gota zazã.

• Dukɔ si me woayi kple yame ƒe nɔnɔme.

• Ɣeyiɣi si wokpɔ mɔ be woawɔ le gota.

• UV-yame ƒe nɔnɔme ƒe dzidzenu si wobia kple gaƒoƒo siwo woatsɔ akpɔe.

• Amadede ƒe vovototo gãtɔ kekeake, ɣie alo keklẽ-bu ƒe seɖoƒe.

• Agbalẽtata, lãɖeɖe, thermoforming, welding alo banding ƒe ɖoɖo.

• Nusiwo hiã be woatsɔ aƒoe, dzobibi, antistatic alo atike ƒe nɔnɔmewo.

• Ametakpɔnu-film ƒe nudidi.

• Dodokpɔ ŋuti nyatakaka siwo hiã kple sedziwɔwɔ ŋuti nuŋlɔɖiwo.

• Gbãtɔ ƒe nudɔdɔ ƒe agbɔsɔsɔme kple ƒe sia ƒe ƒe didi si wobu.

• Packing, destination port kple ŋkeke si wobia be woatsɔe vɛ.

Ðo Wò Amadede PVC ƒe Agbalẽ Nudidiwo ɖa

Related PVC Nyatakaka gbalẽviwo kple Dodokpɔ ƒe Nyatakakawo

Axa gbãtɔa tsɔ PVC nyatakaka geɖe agbalẽ dzi nyawo s kple dodokpɔ ŋuti nyatakakawo ɖe eme. Wodzra wo ɖo ɖe ete abe numekugbalẽ siwo do ƒome kplii ene.

Nuŋlɔɖi aɖewo ku ɖe film si me kɔ, gray board, offset-printing agbalẽ dzi nyawo alo PVC nu bubu ŋu. Hafi nàzã nyatakaka aɖe la, ɖo kpe edzi be eƒe wɔwɔme, amadede, titrime, afisi wòwɔe le kple dodokpɔ ƒe kpɔɖeŋu ku ɖe amadede si tututu UV-stabilized PVC agbalẽ dzi nyawo si woƒle la ŋu.

   PVC ƒe agbalẽ si me kɔ Nyatakakagbalẽvi

   Dzoxɔxɔ ƒe ŋutete le PVC ƒe Agbalẽvi sesẽ

   PVC Grey Board ƒe Dodokpɔ Ŋuti Nyatakaka

   PVC Klɔ Film ƒe Nyatakakagbalẽvi

   PVC ƒe Agbalẽ Dodokpɔ ƒe Nyatakaka

   20mm Grey Board Dodokpɔ ƒe Nyatakaka

   PVC ƒe Agbalẽ na Offset Tata Dodokpɔ Nyatakaka

Nubablɛwo Kple Wo Ðoɖoɖa

Kpɔɖeŋu ƒe babla: Woate ŋu atsɔ PE kotokuwo akpɔ A4 agbalẽ dzi nyawo s kple amadede ƒe kpɔɖeŋuwo ta eye woabla wo ɖe agbalẽɖoɖoɖaɖakawo me.

Sheet packing: Woateŋu atsɔ PE film alo kraft paper abla PVC agbalẽ dzi nyawo s gbadzawo eye woatsɔ pallet sesẽwo akpɔ wo ta.

Roll packing: Woate ŋu atsɔ ametakpɔ film kple kraft pepa abla PVC rolls tsɛwo ɖe reference 76mm paper core ŋu.

Takpɔkpɔ le anyigba dzi: Woate ŋu aƒo nu tso axa ɖeka alo axa eve ƒe ametakpɔnu film ŋu na glossy agbalẽ dzi nyawo s siwo hiã takpɔkpɔ tso ʋuʋudedi me.

Pallet packing: Woate ŋu abla agbalẽwo ɖe plywood alo fumigation-free export pallets dzi kple nugbɔ takpɔkpɔ, ka kple stretch film.

Nubablɛ siwo wowɔ ɖe ɖoɖo nu: Ame ŋutɔ ƒe ŋkɔwo, dzesidenu siwo wota, barcode kple dzesi siwo wowɔ ɖe ɖoɖo nu be woaɖo wo ɖe amewo la li.

Agbatsɔtsɔ: Agbatsɔtsɔ ƒe agbɔsɔsɔme nɔ te ɖe eƒe titrime, agbalẽ dzi nyawo ƒe didime, pallet ƒe nɔnɔme, agbalẽ xatsaxatsa ƒe didime kple nugoe ƒe kpekpeme ƒe seɖoƒe siwo le se nu dzi.

Ɣeyiɣi si woatsɔ awɔe: Zi geɖe la, ewɔwɔ si wozãna ɖaa bia abe ŋkeke 7-15 ene le amadede, atike si wowɔ, eƒe nɔnɔme, kpɔɖeŋu, babla kple nusi wotsɔ de eme ƒe kpeɖodzi megbe.

Ðaseɖigbalẽwo Kple Sedziwɔwɔ Ŋuti Nuŋlɔɖiwo

Nuŋlɔɖi siwo li ateŋu anye mɔ̃ɖaŋununya ŋuti nyatakakawo agbalẽ dzi nyawo s, dedienɔnɔ ŋuti nyatakakawo agbalẽ dzi nyawo s, nusiwo ŋu seɖoƒe le ŋuti nyatakakawo, nunɔamesi ŋutɔŋutɔwo ŋuti nyatakakawo, UV-yame ƒe nɔnɔme ŋuti nyatakakawo, dzoxɔxɔ ƒe nyatakakawo kple nyonyome-dzikpɔkpɔ ƒe ɖaseɖigbalẽwo.

Ele be woalé ŋku ɖe nuŋlɔɖi ɖesiaɖe ŋu le alesi wowɔe pɛpɛpɛ, amadede, titrime, eƒe gogloƒe, teƒe si wowɔe le kple dodokpɔ ƒe kpɔɖeŋua nu.

Ele be woaɖɔ SGS le dodokpɔa ƒe lolome tututu nu eye mele be woatsɔe afia abe xexeame katã ƒe adzɔnuwo ƒe ɖaseɖigbalẽ ene o.

ISO 9001 ku ɖe habɔbɔ aɖe ƒe nyonyome dzikpɔkpɔ ƒe ɖoɖo ŋu eye meɖoa UV ƒe tsitretsitsi, dzo ƒe dɔwɔwɔ, nuɖuɖu ƒe dedienɔnɔ alo atikewo ƒe sɔsɔ ɖe wo ɖokui si o.

Ele be woaɖo kpe ɖaseɖigbalẽa tɔ, afisi wowɔe le, tata si wozãna ɖaa, afisi wòakeke ɖo kple ɣeyiɣi si wòawɔ dɔ nyuie dzi hafi woatae.

HSQY Xexeame Katã ƒe Nukpɔkpɔwo

Nukatae Nàtia HSQY abe Wò Amadede PVC ƒe Agbalẽ Nudzrala ene?

• Amadede sesẽ sesẽ PVC agbalẽ dzi nyawo s na agbalẽtata, dzesiwo kple ewɔwɔ.

• Titrime siwo woɖo ɖi tso abe 0.21mm va ɖo 6.5mm ene.

• agbalẽ dzi nyawo didime siwo woɖo ɖi kple esiwo wowɔ ɖe ɖoɖo nu.

• Amadede siwo me mekɔ o, siwo me kɔ eye wodzena nyuie ƒe tiatia.

• RAL, Pantone kple physical-sample amadede ƒe sɔsɔ.

• Glossy, matte, frosted kple embossed nuwuwu.

• Xɔme kple dɔwɔwɔ-koŋ UV-li ke gota grades.

• Agbalẽtata, dzoxɔxɔ ƒe wɔwɔme kple dɔwɔƒewo ƒe wɔwɔme ƒe dzesiwo.

• Kpɔɖeŋuwo na amadede, UV, agbalẽtata kple ewɔwɔ ƒe dodokpɔ.

• Dzɔdzɔmeŋutete me dzodzro le kpɔɖeŋu siwo dzi woda asi ɖo kple nɔnɔme tɔxɛwo nu.

• Nubablɛ siwo wowɔ ɖe ɖoɖo nu kple dukɔwo dome meliɖoɖo ƒe kpekpeɖeŋu.

Hafi woawɔ nu geɖe la, HSQY ɖo aɖaŋu be woado PVC agbalẽ dzi nyawo si wotia la kpɔ to asisi la ƒe agbalẽtata, lãɖeɖe, wɔwɔme, babla, gaƒoƒo kple gotagome eɖoɖo ƒe nɔnɔme ŋutɔŋutɔwo zazã me.

Te ɖe HSQY ŋu hena Kpɔɖeŋuwo kple Asixɔxɔ

Nya Siwo Wobia Enuenu Tso UV-Stabilized Colored PVC ƒe Agbalẽ s

Nukae nye amadede sesẽ PVC agbalẽ dzi nyawo ?

Enye nu sesẽ, si me futukpɔ mele o PVC agbalẽ dzi nyawo si wotsɔ amadedewo wɔe be wòawɔ amadede si me mekɔ o, si me kɔ alo si me kɔ.

Nukae UV-si li ke PVC fia?

Efia be atike siwo wotsɔ kpe ɖe eŋu siwo wotia be woatsɔ aɖe ɣe ƒe keklẽ si do ƒome kple ɣe ƒe keklẽ, ɣie, keklẽ ƒe bu kple eƒe ŋeŋe dzi akpɔtɔ la le atike la me.

Ðe UV-si li ke PVC te ŋu nɔa te ɖe yame ƒe nɔnɔme nu tegbeea?

Ao, gota gome dɔwɔwɔ nɔ te ɖe atike si wowɔ, amadede, titrime, yame ƒe nɔnɔme, eɖoɖo, mɔfiame si woatsɔ akpɔe kple ɣeyiɣi si wobia be woatsɔ awɔ dɔe dzi.

Ðe woate ŋu azã amadede ɖesiaɖe le gotaa?

Ele be woada amadede ɖesiaɖe kpɔ ɖe vovo elabena amadedewo kpɔa ŋusẽ ɖe UV ƒe liƒo, dzoxɔxɔ ƒe xɔxlɔ̃ kple amadede ƒe léle ɖe te dzi.

Ðe viviti PVC agbalẽ dzi nyawo s va xɔa dzo ɖe gota?

Zi geɖe la, amadede viviwo xɔa ɣe ƒe dzoxɔxɔ geɖe wu amadede ɣi alo esiwo me kɔ, si ate ŋu ana dzoxɔxɔ ƒe kekeɖenudɔwɔwɔ kple panel ƒe dzoxɔxɔ nadzi ɖe edzi.

Aleke wodoa UV ƒe dɔlélenutsiŋutete kpɔna?

Dodokpɔ ateŋu azã ASTM D4329, ASTM G154, ISO 4892-3 alo mɔnu si dzi wolɔ̃ ɖo, kple amadede, keklẽ, ɣie kple mɔ̃ɖaŋu-nɔnɔmewo léle ɖe te ƒe dodokpɔ.

Ðe gaƒoƒo 1000 ƒe UV dodokpɔ sɔ kple gota ƒe xexlẽme aɖe si woɖo ɖia?

Ao, wozãa dodokpɔ kabakaba koŋ tsɔ tsɔa nuwo sɔna kple wo nɔewo le nɔnɔme siwo dzi wokpɔ ŋusẽ ɖo me eye mesɔ kple gota gome ɣeyiɣi ɖeka tẽ le yame ƒe nɔnɔme ɖesiaɖe me o.

Titrime kawoe li?

agbalẽ dzi nyawo ƒe titrime siwo woɖo ɖi la tso abe 0.21mm va ɖo 6.5mm ene. Woate ŋu akpɔ thinner ƒe nɔnɔme tiatia aɖewo tso abe 0.06mm ene.

agbalẽ dzi nyawo ƒe lolome siwo woɖo ɖi kawoe li?

Dzidzeme siwo woɖo ɖi dometɔ aɖewoe nye 700 × 1000mm, 915 × 1830mm kple 1220 × 2440mm.

Ðe woate ŋu awɔ agbalẽ dzi nyawo didime tɔxɛwoa?

Ɛ̃. Woate ŋu awɔ didime siwo wowɔ ɖe ɖoɖo nu kple esiwo wotso ɖe woƒe lolome nu le kekeme kple dɔwɔnuwo ƒe seɖoƒe si sɔ me.

Amadede kawoe li?

Amadede siwo wozãna ɖaa dometɔ aɖewoe nye ɣi, yibɔ, dzĩ, ɣi, amadede dzẽ kple blɔ. Woate ŋu atsɔ amadede bubuwo asɔ kple nusi dzi woda asi ɖo.

Ðe HSQY ate ŋu asɔ kple RAL alo Pantone ƒe amadedea?

Ɛ̃. Woateŋu ada RAL, Pantone alo physical-sample matching kpɔ le pigment ƒe anyinɔnɔ kple nudɔdɔ ƒe agbɔsɔsɔ suetɔ nu.

Ðe amadede siwo me kɔ PVC agbalẽ dzi nyawo s li?

Ɛ̃. Woate ŋu awɔ amadede siwo me kɔ kple esiwo me kɔ nyuie le nukpɔkpɔ kple titrime ƒe nudidiwo nu.

Ðe esia PVC agbalẽ dzi nyawo sɔ kple PVC foam boarda?

Ao. Adzɔnu sia nye nu sesẽ si le ʋeʋẽm PVC agbalẽ dzi nyawo . PVC foam board ƒe lãmenugbagbeviwo ƒe nuto si le bɔbɔe eye eƒe kpekpeme le ʋɛ ŋutɔ.

Ðe woate ŋu ata PVC agbalẽ dzi nyawo s siwo le amadede vovovowo mea?

Woate ŋu ata anyigba siwo sɔ ɖe screen dzi, woata UV inkjet alo woata UV offset le ink-adhesion kple curing dodokpɔwo megbe.

Ðe woate ŋu ata PVC agbalẽ dzi nyawo s vivitiwo kple nɔnɔmetata siwo ƒe amadede le keklẽma?

Ẽ, gake woate ŋu abia be woatsɔ nuŋlɔtsi ɣi alo primer layer si me mekɔ o awɔe be substrate ƒe amadede nagakpɔ ŋusẽ ɖe nɔnɔmetata la dzi o.

Ðe woate ŋu awɔ dzoxɔxɔ ƒe nɔnɔme PVC agbalẽ dzi nyawo si le amadede mea?

Dzeside si dzi woda asi ɖo ateŋu anye vacuum alo nyaƒoɖeamenu si wowɔ le dzoxɔxɔ, aŋɔ, he goglome kple fafa ƒe nɔnɔmewo dodokpɔ vɔ megbe.

Ðe amadedea trɔna le dzoxɔxɔ ƒe nɔnɔmewɔwɔ vɔ megbea?

Kekeɖenu goglo ate ŋu aɖe titrime dzi akpɔtɔ eye wòatrɔ amadede si dze abe, keklẽ alo keklẽ si me mekɔ o le teƒe siwo wowɔ geɖe le ene. Wokafui be woado ewɔwɔ kpɔ.

Ðe woate ŋu atsɔ PVC agbalẽ dzi nyawo aɖo CNC dzia?

Ɛ̃. Zã dɔwɔnu ɖaɖɛwo, nuɖuɖu ƒe agbɔsɔsɔme si sɔ, agbalẽ dzi nyawo kpeɖeŋutɔ kple eɖeɖe si sɔ na plastik mɔ̃wo.

Ðe PVC agbalẽ dzi nyawo ate ŋu atso laser?

Womekafui be woatsɔ laser lãɖeɖe kple nuŋɔŋlɔ dzro ko o elabena PVC ate ŋu ana ya alo ke si me afɔku le nado. Wokafui be woatsɔ mɔ̃ atsoe.

Ðe agbalẽ dzi nyawo la mate ŋu age ɖe eme oa?

Tsi mexɔa nu sesẽ PVC o eye wòte ŋu nɔa te ɖe tsidzadza si sɔ nu, gake ɖoɖo bliboa si woda ɖe eme la nɔ te ɖe ƒunukpeƒewo, nusiwo wotsɔ blaa nu, goawo kple nutrenuwo dzi.

Ðe agbalẽ dzi nyawo atikewo te ŋu nɔa te ɖe enua?

PVC tsi tre ɖe atike geɖe ŋu, gake ele be woalé ŋku ɖe alesi wòsɔ ɖe wo nɔewo nu ŋu hena atike si tututu, eƒe agbɔsɔsɔme, dzoxɔxɔ kple ɣeyiɣi si woatsɔ awɔe.

Ðe woate ŋu azã PVC si ƒe amadede sɔ na atikewo ƒe tsigoewoa?

Mele be woazã dzesi alo atsyɔ̃ɖoɖo ƒe dzesi si wozãna le wo ɖokui si na atikewo ƒe tsigoewo o. Wobia be woawɔ dɔwɔƒe ƒe PVC -U ƒe dzeside tɔxɛ kple mɔ̃ɖaŋudɔwo me toto.

Ðe amadede PVC agbalẽ dzi nyawo dzo mate ŋu age oa?

Mele be woagblɔ be dzo mate ŋu age ɖe eme keŋkeŋ o. Ele be woatsɔ dodokpɔ ƒe nyatakaka aɖo kpe dzo ƒe dɔwɔwɔ dzi hena dzeside, amadede kple titrime tututu.

Ðe dzesi si nye antistatic li?

Woate ŋu ada atike si tsi tre ɖe dɔlékuiwutike ŋu kpɔ le alesi wòhiã be wòate ŋu anɔ te ɖe anyigba ƒe nɔnɔme nu, fafa, ɣeyiɣi didi si wòxɔna kple alesi wòzãnɛ nu.

Ðe PVC agbalẽ dzi nyawo la sɔ na nuɖuɖu babla?

Mele be woazã UV si ƒe amadede nye standard agbalẽ dzi nyawo le eɖokui si na nuɖuɖu ƒe kadodo o. Wobia be woawɔ atike si woɖo ɖi na wo kple afisi woayi ƒe asi ŋuti nuŋlɔɖiwo.

Ðe woate ŋu azã amadede PVC na atikewɔnuwoa?

Atikewɔwɔ me zazã bia be woatsɔ dzeside si sɔ kple nusiwo wotsɔ wɔe, dzadzɛnyenye, nusiwo woate ŋu akpɔ kple nusiwo wowɔ vɔ ƒe nudidiwo ƒe kpeɖodzi.

Ðe ametakpɔnu ƒe film li?

Woateŋu aƒo nu tso akpa ɖeka alo axa eve takpɔnu film ŋu na glossy agbalẽ dzi nyawo ƒe nɔnɔme tiatia aɖewo.

Nukae nye nudɔdɔ ƒe agbɔsɔsɔ suetɔ kekeake?

Standard amadedewo kple nɔnɔmewo zi geɖe la, MOQ anɔ abe 1000kg ene. Amadede siwo wowɔ ɖe ɖoɖo nu alo UV ƒe atike tɔxɛwo ate ŋu abia abe 3000kg ene.

Ðe kpɔɖeŋuwo lia?

A4 agbalẽ dzi nyawo s kple amadede ƒe kpɔɖeŋu siwo li fifia ateŋu anɔ anyi. UV alo amadede ƒe kpɔɖeŋu siwo wowɔ ɖe ɖoɖo nu ate ŋu abia be woawɔ ɖoɖo ɖe dodokpɔ wɔwɔ ŋu.

Nukae nye ɣeyiɣi si woatsɔ awɔe?

Zi geɖe la, ewɔwɔ si wozãna ɖaa bia abe ŋkeke 7-15 ene le amadede, atike si wowɔ, eƒe nɔnɔme, kpɔɖeŋu, nubablɛ kple nusi wotsɔ de eme ƒe kpeɖodzi megbe.

Nyatakaka kawoe hiã hafi woate ŋu ayɔ nyayɔyɔ?

Na eƒe titrime, didime, amadede, anyigba, xɔme alo gota zazã, UV dodokpɔ, dɔwɔwɔ mɔnu, nɔnɔme tɔxɛwo, agbɔsɔsɔme, babla kple yiyi.

Xɔ Amadede si Wotrɔ Asi Le PVC ƒe Agbalẽ Nyayɔyɔ

Ku ɖe HSQY Plastic Group ŋu

HSQY Plastic Group naa amadede sesẽ PVC agbalẽ dzi nyawo s, eme kɔ PVC agbalẽ dzi nyawo s, woate ŋu ata PVC agbalẽ dzi nyawo s, PVC filmwo, PET agbalẽ dzi nyawo s, PP agbalẽ dzi nyawo s kple plastic si wowɔ ɖe ɖoɖo nu nuzazãwo na dukɔwo dome B2B asisiwo.

HSQY doa alɔ dzesiwɔlawo, agbalẽtalawo, ɖeɖefia dɔwɔƒewo, plastic fabricators, thermoforming dɔwɔƒewo, dɔwɔƒewo processors, importers kple distributors kple amadede ƒe sɔsɔ, kpɔɖeŋu dodokpɔ, customized wɔwɔ, nyonyome me toto kple export packing.

Bia be woagblɔ asixɔxɔ si woaxe na ye kple Kpɔɖeŋu