Takardar PVC mai launi tare da Kariyar UV

Mai Launi Mai Daidaita UV PVC takardar

HSQY tana ƙera launuka masu ƙarfi na UV masu daidaita PVC takardar abu don alamun waje da na ciki, nunin da aka buga, rufin bango, allunan ado, abubuwan da aka haɗa da thermoformed, murfin kayan aiki da ƙera masana'antu.

Kayan yana da ƙarfi, mara kumfa mai ƙarfi PVC takardar abu wanda ake samu a launuka masu haske, masu haske da kuma masu haske. Launuka na yau da kullun sun haɗa da fari, baƙi, ja, rawaya, kore da shuɗi, yayin da launuka na musamman za a iya daidaita su bisa ga samfurin zahiri, ma'aunin RAL, ma'aunin Pantone ko ma'aunin launi da aka amince da shi.

Kauri na yau da kullun takardar abu yana tsakanin kimanin 0.21mm zuwa 6.5mm. Fina-finan sirara PVC da kuma fina-finan takardar abu daga kimanin 0.06mm zuwa 0.20mm na iya samuwa dangane da tsarin samarwa, tauri, faɗi da buƙatun aikace-aikace.

Girman daidaitaccen takardar abu ya haɗa da 700 × 1000mm, 915 × 1830mm da 1220 × 2440mm. Girman takardar abu , guntun yanke da tsarin birgima za a iya tattauna su a cikin kimanin faɗin samarwa na 1280mm.

Ana samar da kariyar UV ta hanyar amfani da tsari na musamman wanda ya ƙunshi masu daidaita yanayi, launuka da ƙari masu dacewa. Aikin waje ya dogara ne akan launi da aka zaɓa, kauri, yanayi, shigarwa, fallasa hasken rana da tsawon lokacin sabis ɗin da ake buƙata.

Bai kamata a bayyana launukan PVC na yau da kullun a matsayin waɗanda suka dace da amfani na dindindin a waje, hulɗa da abinci, na'urorin likitanci, tankunan sinadarai, aikace-aikacen hana gobara ko takamaiman rarrabuwar wuta ba. Waɗannan aikace-aikacen suna buƙatar takamaiman matakin da aka amince da shi da kuma bayanan gwaji masu goyan baya.

Bincika cikakken HSQY PVC launi takardar abu kewayon ko bita ƙarin samfura masu tauri PVC takardar abu.

Nemi PVC takardar Farashi    Nemi Samfuran Launi da UV

Bidiyo mai launi PVC takardar

Kalli bidiyon da ke ƙasa don yin bita kan HSQY mai launi PVC takardar abu s, tsarin samarwa, zaɓuɓɓukan ƙera da mafita na musamman na filastik- takardar abu .

Hotuna masu launi PVC takardar

Menene Ma'aunin Launi Mai Daidaita UV PVC takardar ?

Mai tauri mai launi mai haske PVC takardar abu wani sinadari ne mai ƙarfi na polyvinyl chloride takardar abu wanda aka ƙera shi da launuka masu daidaita haske da hasken ultraviolet don rage lalacewa da hasken rana ke haifarwa.

takardar abu na iya zama mara haske, mai haske ko kuma mai haske kuma ana iya ƙera shi a cikin launuka masu sheƙi, matte, mai sanyi, mai laushi ko kuma waɗanda aka keɓance musamman.

Kayan yana ba da ƙarfi mai amfani, juriya ga sinadarai, rufin lantarki da aikin ƙera don alamu, nunin faifai, kayan aiki da zaɓaɓɓun aikace-aikacen masana'antu.

Daidaitawar hasken UV na iya rage raguwar launi, rawaya, alli a saman fata, asarar sheƙi da kuma ɓacin rai, amma ba ya sa kowace PVC tsari ya kasance mai jure wa yanayi na dindindin.

Dole ne a tabbatar da dacewa da waje don ainihin launi, launi, kauri, kunshin UV, yanayi da lokacin sabis ɗin da aka nufa.

Bayani dalla-dalla game da launuka masu haske na UV PVC takardar

Bayanan ƙarshe yakamata su gano cikakken matakin tsari, haƙurin kauri, girma, nunin launi, sheƙi, saman, buƙatar UV, gwajin yanayi, tsarin ƙera da shigarwa da aka yi niyya.

Ƙarfin Ƙarfi PVC takardar da PVC Kumfa Board

Bai kamata masu siye su kwatanta allon kumfa mai ƙarfi PVC takardar abu da PVC ta amfani da kauri kawai ba. Nauyin takardar, yawanta, tauri, riƙe manne da kuma halayen ƙera shi ya bambanta.

Yadda Ake Kimanta Kariyar UV

Ya kamata a ayyana juriyar UV ta hanyar maƙasudin aiki mai aunawa maimakon bayanin gaba ɗaya na hana UV.

Sharuɗɗan da aka fi sani da saurin yanayi sun haɗa da ASTM D4329, ASTM G154 da ISO 4892-3. Rahoton ya kamata ya bayyana nau'in fitilar, hasken rana, zafin jiki, danshi ko zagayowar ruwa da kuma jimillar lokacin da aka fallasa shi.

Gwaji mai sauri yana da amfani wajen kwatanta kayan aiki amma ba ya daidai da adadin shekaru da aka ƙayyade a waje a kowace yanayi.

Zaɓin Launi don Waje PVC takardar s

Sinadarin sinadarai na pigment yana shafar daidaiton launi, shanyewar UV, tarin zafi da kuma bayyanarsa na dogon lokaci.

Launuka fari da haske gabaɗaya suna shan ƙarancin zafi na rana fiye da launukan duhu. Baƙi, shuɗi mai duhu, kore mai duhu da ja mai duhu takardar abu s na iya kaiwa ga yanayin zafi mafi girma a saman hasken rana kai tsaye.

Mafi girman zafin takardar abu zai iya ƙara faɗaɗa zafi, durƙusawa, damuwa mai ɗaurewa da motsi mai girma.

Ayyukan waje ya kamata su ƙayyade launi, yanayin shigarwa, girman faifan, tazara tsakanin tallafi, share ramuka, zafin da ake tsammani da lokacin sabis ɗin da aka nufa.

Bai kamata a shafa sakamakon yanayi na launi ɗaya ta atomatik ga wani launi ko inuwa daban ba.

Aikace-aikacen Bugawa da Alamomi

Ana iya amfani da launuka masu laushi PVC takardar abu s don alamun da aka buga, zane-zanen baje kolin, nunin kaya, alamun alkibla da allunan talla.

Ya kamata a gwada bugu a kan ainihin saman, launi da kuma rukunin samarwa. Ƙananan substrates na iya buƙatar farin tawada ko kuma wani Layer na firam mai haske.

Ƙirƙira da Tsarin Haske

• Yi amfani da ruwan wukake masu kaifi, na'urorin ratsawa, kayan aikin niƙa da kuma injinan da aka ƙera don filastik takardar abu .

• Taimaka wa takardar abu yayin aikin injin don rage girgiza, guntuwar da lalacewar gefen.

• A bar isasshen sarari a kusa da ramukan hawa na waje don faɗaɗa zafi.

• A guji matse manne da yawa, musamman a kan manyan bangarori na waje.

• Yi amfani da yanayin dumama da mold da ya dace don samar da injin tsotsa ko matsi.

• Tabbatar da riƙe launi da sheƙi bayan an yi amfani da thermoforming.

• Yi amfani da sandunan walda masu jituwa da PVC , manne da simintin narkewa.

• Gwada manne a kan ainihin launi, saman da kuma tsarin UV.

• Samar da iska yayin dumama, walda da ƙera zafi.

• Kada a yi amfani da kayan aikin yanke laser ko sassaka laser na yau da kullun don PVC .

Tsarin Samarwa

HSQY yana amfani da extrusion ko kalanda bisa ga kauri, faɗi, saman da tsarin samfurin da aka zaɓa.

Kayan Danye da Haɗa Launi

Ana aunawa da PVC resin, masu daidaita abubuwa, pigments, kayan aikin sarrafawa, masu gyara tasirin da ƙarin UV na musamman akan aikace-aikace bisa ga tsarin da aka amince da shi.

Fitarwa ko Kalanda

Ana sarrafa mahaɗin zuwa takardar abu ko fim ta amfani da yanayin zafin jiki, matsin lamba, saurin layi da yanayin birgima.

Kammalawar Fuskar

Ana iya goge saman, a goge shi da matte, a yi masa fenti ko a yi masa fenti bisa ga ƙa'idar samfurin da aka amince da ita.

Sanyaya da Kulawa Mai Girma

Sanyaya mai sarrafawa yana taimakawa wajen kiyaye daidaiton kauri, siffa, faɗi da daidaiton girma.

Yankan, Naɗewa da Dubawa

Ana yanka samfurin zuwa takardar abu s ko kuma a naɗe shi a cikin birgima, a duba shi kuma a naɗe shi bisa ga ƙa'idar da aka amince da ita.

Amfani da Launi Mai Tauri PVC takardar s

• Alamun waje: Alamun alkibla, alamun aminci da faifan bayanai ta amfani da ingantaccen matakin UV mai karko.

• Talla a cikin gida: Allunan da aka buga, alamun talla da kuma zane-zanen baje kolin.

• Nunin dillalai: Nunin POP, masu riƙe samfura, kayan shiryayye da kayan haɗin alama.

• Rufin ciki: Allon bango na ado, sassan bango da kuma allunan saman da aka tallafa.

• Abubuwan da aka yi wa thermoformed: Murfin da aka yi wa ado, gidajen zama, tire da kayan nuni.

• Ƙirƙirar masana'antu: Allon kayan aiki, masu gadi, layuka da kuma kayan aikin filastik da aka ƙera.

• Kayan aikin sinadarai: Tankuna, bututun ruwa da layukan da aka zaɓa ta amfani da kimantawar da aka amince da ita a fannin masana'antu da kuma juriya ga sinadarai.

• Aikace-aikacen lantarki: Faifan rufi da abubuwan da aka haɗa sun dogara da buƙatun lantarki da harshen wuta.

• Samfura da alamu: Samfura masu launi masu ɗorewa, jagororin yankewa da kayan aikin ƙera.

Masana'antu da Aikace-aikacen Sinadarai

Ana amfani da Rigid PVC a cikin zaɓaɓɓun aikace-aikacen sarrafa sinadarai da kuma sarrafa ruwa saboda yana iya jure wa acid, alkalis da kuma maganin gishiri da yawa.

Juriyar sinadarai ta dogara ne akan ainihin abu, yawan aiki, zafin jiki, matsin lamba, lokacin fallasawa, matsin lamba na inji da hanyar walda.

Bai kamata a yi amfani da launin talla na gabaɗaya takardar abu ta atomatik ga tankunan sinadarai, kayan aikin lantarki ko tsarin ruwan sha ba.

Ayyukan masana'antu ya kamata su yi amfani da wani takamaiman matakin sinadarai PVC -U takardar abu tare da takaddun da suka dace da sinadarai, iyawar walda da kuma yanayin sabis na dogon lokaci.

Mai hana harshen wuta, mai hana kumburi da kuma maki na musamman

Aikace-aikacen Kula da Abinci da Lafiya

Bai kamata a bayyana launin da aka daidaita ta hanyar UV PVC takardar abu ta atomatik a matsayin wanda abinci zai iya taɓawa ko kuma wanda ba zai iya taɓawa ba.

Dacewar hulɗa da abinci ya dogara ne da resin PVC , masu daidaita abinci, launuka, ƙari, abubuwan da aka sake yin amfani da su, nau'in abinci, lokacin hulɗa, zafin jiki da kasuwar da za a je.

Aikace-aikacen likita na iya buƙatar kayan aiki masu sarrafawa, bin diddiginsu, tsafta, bayanai game da yadda za a iya daidaita yanayin halittu, gwajin tsaftace muhalli da kuma tabbatar da ingancin samfuran da aka gama.

Masu siye ya kamata su samar da ainihin buƙatun dokoki da gwaji kafin su zaɓi matakin musamman na abinci ko na likitanci PVC .

Gwaje-gwajen Kula da Inganci da Aka Ba da Shawara

• PVC resin, mai daidaita yanayi, tabbatar da launi da ƙari.

• Juriyar kauri da kauri.

• Tsawon takardar, faɗi da kuma haƙurin diagonal.

• Faɗi, baka, lanƙwasa da yanayin gefen.

• Tabbatar da nauyi da kuma yawan takardar abu .

• Ma'aunin launi da bambancin launi tsakanin tsari da tsari.

• Mai sheƙi, matakin matte da kuma daidaiton yanayin saman.

• Baƙaƙen tabo, gels, ramuka, alamun kwarara, ƙaiƙayi da gurɓatawa.

• Ƙarfin tauri, tsawaitawa da modulus inda aka ƙayyade.

• Ƙarfin tasiri da aikin tasirin sanyi inda ake buƙata.

• Vicat yana tausasawa da kuma rage zafi.

• Canjin girma bayan fallasa zafi.

• Fitar da hasken UV, bambancin launi da kuma riƙe sheƙi.

• Rike kadarorin da suka lalace ko kuma riƙe su da ƙarfi.

• Buga mannewa da juriyar abrasion.

• Gwaje-gwajen thermoforming, lanƙwasawa, walda da haɗin kai.

• Gwaje-gwajen juriya ga sinadarai don aikace-aikacen masana'antu.

• Gwaje-gwajen juriya ga saman don matakan antistatic.

• Gwaje-gwajen ƙonewa don matakan hana ƙonewa.

• Duba kaya, fakiti da kuma duba kwantena.

Zaɓuɓɓukan Launi na Musamman PVC takardar

• Kauri na yau da kullun takardar abu daga kimanin 0.21mm zuwa 6.5mm.

• An zaɓi takamaiman siraran fim daga kimanin 0.06mm.

• 700 × 1000mm, 915 × 1830mm da 1220 × 2440mm takardar abu s.

• Girman takardar abu na musamman da kuma guntu-guntu masu yankewa.

• Fari, baƙi, ja, rawaya, kore, shuɗi da launuka na musamman.

• Kayayyakin da ba su da haske, masu haske da kuma launuka masu haske.

• Daidaita launi na RAL, Pantone da samfurin jiki.

• Sama mai sheƙi, matte, mai sanyi da kuma embossed.

• A cikin gida, an daidaita shi da UV kuma an yi masa aiki a waje.

• Bugawa, thermoforming da kuma masana'antu-ƙirƙira maki.

• Tsarin da aka gyara ta hanyar tasiri, mai hana harshen wuta da kuma maganin hana sata.

• Fim ɗin kariya a gefe ɗaya ko duka biyun inda ya dace a zahiri.

• Lakabi na musamman, pallets, marufi da alamun jigilar kaya.

Bayanin da ake buƙata don PVC takardar Ƙimar Kuɗi

• Kauri da haƙuri da ake buƙata.

• Ana buƙatar girman takardar abu ko na birgima.

• Solid takardar abu ko wani gini na PVC .

• Bayyanar da ba ta da haske, ko kuma bayyananniyar siffa.

• Launi da ake buƙata, RAL, Pantone ko samfurin jiki.

• Fuskar mai sheƙi, matte, mai sanyi ko kuma mai embossed.

• Aikace-aikacen cikin gida ko waje.

• Ƙasar da ake zuwa da kuma yanayi.

• Lokacin hidima na waje da ake tsammani.

• Matsayin da ake buƙata na kariya daga UV da lokutan fallasa.

• Matsakaicin bambancin launi, rawaya ko ƙarancin sheƙi.

• Tsarin bugawa, yankewa, gyaran thermoforming, walda ko haɗin kai.

• Tasirin da ake buƙata, harshen wuta, antistatic ko sinadari.

• Bukatar fim mai kariya.

• Rahoton gwaji da ake buƙata da takardun bin ƙa'ida.

• Adadin odar farko da kuma ƙimar buƙata ta shekara-shekara.

• Shiryawa, tashar jiragen ruwa da ake zuwa da kuma ranar isarwa da ake buƙata.

Aika Bukatunku Masu Launi PVC takardar

Takardun Bayanai da Rahotannin Gwaji Masu Alaƙa PVC

Shafin asali ya ƙunshi bayanai da rahotannin gwaji da dama na PVC takardar abu ]} da kuma rahotannin gwaji. An ajiye su a ƙasa a matsayin takardun tunani masu alaƙa.

Wasu takardu sun shafi fim mai haske, allon toka, bugun bugawa takardar abu ko wani samfurin PVC . Kafin amfani da rahoto, tabbatar da cewa tsarin sa, launi, kauri, wurin samarwa da samfurin gwaji sun shafi ainihin samfurin UV mai launin PVC takardar abu da ake siya.

   Fayil na PVC mai haske Takardar Bayanai

   Rashin ƙonewa na Fayil na PVC mai ƙarfi

   PVC Rahoton Gwajin Allon Toka

   PVC Takardar Bayanan Fim Mai Sharewa

   PVC takardar Rahoton Gwaji

   Rahoton Gwajin Allon Toka Mai 20mm

   PVC takardar don Rahoton Gwajin Bugawa na Offset

Marufi da Isarwa

Samfurin marufi: Ana iya kare A4 takardar abu s da launukan zane da jakunkunan PE kuma a saka su a cikin kwalayen jigilar kaya.

Marufin takardar: Za a iya naɗe lebur PVC takardar abu s da fim ɗin PE ko takarda kraft sannan a kare shi da pallets masu tauri.

Kunshin naɗi: Ana iya naɗe siririn biredi PVC da fim mai kariya da takarda kraft a kusa da tsakiyar takarda mai girman 76mm.

Kariyar saman: Ana iya tattauna fim ɗin kariya na gefe ɗaya ko na gefe biyu don yin sheƙi takardar abu s wanda ke buƙatar kariyar karce.

Shirya fale-falen: Ana iya sanya zanen gado a kan plywood ko kuma fale-falen fitarwa marasa feshi tare da kariyar gefe, madauri da fim ɗin shimfiɗawa.

Marufi na musamman: Ana samun lakabin sirri, tambarin da aka buga, barcode da alamun jigilar kaya na musamman.

Lodawa a cikin kwantena: Yawan lodawa ya dogara da kauri, girman takardar abu , ƙirar fallet, diamita na birgima da iyakokin nauyin kwantena na doka.

Lokacin samar da kayayyaki: Tsarin samarwa na yau da kullun yana buƙatar kimanin kwanaki 7-15 bayan an tabbatar da launi, tsari, ƙayyadaddun bayanai, samfurin, marufi da ajiya.

Takaddun Shaida da Takardun Bin Dokoki

Takardun da ake da su na iya haɗawa da bayanan fasaha takardar abu s, bayanan aminci takardar abu s, rahotannin abubuwan da aka takaita, rahotannin kadarorin jiki, rahotannin yanayin UV, rahotannin ƙonewa da takaddun shaida na sarrafa inganci.

Ya kamata a duba kowace takarda bisa ga ainihin tsari, launi, kauri, saman, wurin samarwa da samfurin gwaji.

Ya kamata a bayyana SGS bisa ga ainihin iyakokin gwaji kuma bai kamata a gabatar da shi azaman takardar shaidar samfuri ta duniya ba.

ISO 9001 yana da alaƙa da tsarin kula da inganci na ƙungiya kuma baya kafa juriyar UV, aikin wuta, amincin abinci ko dacewar sinadarai kai tsaye.

Ya kamata a tabbatar da mai takardar shaidar, wurin da aka ƙera shi, bugu na yau da kullun, iyaka da lokacin inganci kafin a buga shi.

Nunin Duniya na HSQY

Me Yasa Zabi HSQY A Matsayin Mai Kaya Mai Launi PVC takardar ?

• Mai tauri mai launi mai ƙarfi PVC takardar abu s don bugawa, alamu da ƙera.

• Kauri na yau da kullun daga kimanin 0.21mm zuwa 6.5mm.

• Girman da aka ƙayyade kuma aka keɓance na takardar abu .

• Zaɓuɓɓukan launi masu haske, masu haske da kuma bayyanannu.

• Daidaita launi na RAL, Pantone da samfurin jiki.

• Kammalawa masu sheƙi, matte, frosted da embossed.

• Maki na waje wanda aka daidaita ta hanyar UV a cikin gida da aikace-aikace.

• Bugawa, thermoforming da kuma masana'antar ƙera kayayyaki.

• Samfura don launi, UV, bugawa da kimantawa na ƙera.

• Duba inganci bisa ga samfuran da aka amince da su da ƙayyadaddun bayanai.

• Marufi na musamman da tallafin jigilar kaya na ƙasashen waje.

Kafin a samar da kayayyaki da yawa, HSQY ya ba da shawarar a gwada PVC takardar abu da aka zaɓa ta amfani da ainihin bugawa, yankewa, ƙirƙirar, haɗawa, walda da yanayin shigarwa na waje na abokin ciniki.

Tuntuɓi HSQY don Samfura da Farashi

Tambayoyin da Ake Yawan Yi Game da Masu Launi Masu Daidaita UV PVC takardar s

Menene launin tauri PVC takardar abu ?

Wani abu ne mai ƙarfi, wanda ba shi da kumfa PVC takardar abu wanda aka ƙera da launuka don ƙirƙirar abu mai launi mara haske, mai haske ko mai haske.

Me ake nufi da PVC mai daidaita hasken UV?

Yana nufin cewa hadadden maganin ya ƙunshi ƙarin abubuwa da aka zaɓa don rage faɗuwar rana, rawaya, asarar sheƙi da kuma bushewar fata.

Shin hasken UV PVC yana kare yanayi har abada?

A'a. Aikin waje ya dogara ne akan tsari, launi, kauri, yanayi, shigarwa, alkiblar fallasa da lokacin sabis ɗin da ake buƙata.

Za a iya amfani da kowace launi a waje?

Ya kamata a tantance kowace launi daban-daban domin launuka suna tasiri ga daidaiton UV, sha da zafi da kuma riƙe launi.

Shin duhu PVC takardar abu yana ƙara zafi a waje?

Launuka masu duhu yawanci suna shan zafi fiye da launin fari ko haske, wanda zai iya ƙara faɗaɗa zafin zafi da zafin panel.

Ta yaya ake gwada juriyar UV?

Gwaji na iya amfani da ASTM D4329, ASTM G154, ISO 4892-3 ko wata hanya da aka amince da ita, tare da kimanta launi, sheƙi, rawaya da kuma riƙe kadarorin injiniya.

Shin gwajin UV na sa'o'i 1000 daidai yake da adadin shekarun da aka ƙayyade a waje?

A'a. Ana amfani da gwaje-gwajen gaggawa galibi don kwatanta kayan da ke ƙarƙashin yanayin da aka sarrafa kuma ba ya daidaita daidai lokacin waje ɗaya a kowace yanayi.

Wadanne kauri ake samu?

Kauri na yau da kullun takardar abu ya kama daga kimanin 0.21mm zuwa 6.5mm. Zaɓaɓɓun ƙayyadaddun bayanai na iya samuwa daga kimanin 0.06mm.

Waɗanne girman takardar abu na yau da kullun ake samu?

Girman da aka saba amfani da shi ya haɗa da 700 × 1000mm, 915 × 1830mm da 1220 × 2440mm.

Za a iya samar da girma na musamman takardar abu ?

Eh. Ana iya samar da girma na musamman da kuma kayan da aka yanka a cikin faɗin da kuma iyakokin kayan aiki.

Wadanne launuka ne ake samu?

Launuka na yau da kullun sun haɗa da fari, baƙi, ja, rawaya, kore da shuɗi. Ana iya daidaita ƙarin launuka zuwa ga alamar da aka amince da ita.

Shin HSQY zai iya daidaita launin RAL ko Pantone?

Eh. Ana iya kimanta daidaiton RAL, Pantone ko samfurin jiki dangane da samuwar launuka da kuma mafi ƙarancin adadin oda.

Shin akwai launuka masu haske masu haske PVC takardar abu s?

Eh. Ana iya samar da launuka masu haske da haske bisa ga buƙatun gani da kauri.

Shin wannan PVC takardar abu iri ɗaya ne da allon kumfa na PVC ?

A'a. Wannan samfurin yana da kauri mai ƙarfi PVC takardar abu . Allon kumfa PVC yana da ƙwanƙwasa mai sauƙi da kuma ƙarancin yawa sosai.

Za a iya buga PVC takardar abu s masu launi?

Ana iya buga saman da ya dace da allo, a buga tawada ta UV ko a buga UV bayan an yi gwajin mannewa da kuma gogewa.

Za a iya buga dark PVC takardar abu s da zane-zane masu launin haske?

Eh, amma ana iya buƙatar farin tawada ko kuma wani ƙaramin laydi mai haske don hana launin substrate ya shafi zane.

Za a iya yin amfani da launi PVC takardar abu a yanayin zafi?

An amince da matakin injin ko matsin lamba bayan an gwada yanayin dumama, mold, zurfin zane da sanyaya.

Shin launi yana canzawa bayan thermoforming?

Miƙewa mai zurfi na iya rage kauri da kuma canza launin da ke bayyane, sheƙi ko rashin haske a wurare masu girman gaske. Ana ba da shawarar a gwada samarwa.

Za a iya amfani da PVC takardar abu a CNC?

Eh. Yi amfani da kayan aiki masu kaifi, ƙimar ciyarwa mai dacewa, tallafin takardar abu da kuma cirewa da ya dace da injinan filastik.

Za a iya yankewa PVC takardar abu ta hanyar laser?

Ba a ba da shawarar yankewa da sassaka na laser na yau da kullun ba saboda PVC na iya haifar da iskar gas ko ƙura mai haɗari. Ana ba da shawarar yankewa na inji.

Shin takardar abu ba ya hana ruwa shiga?

Tauri PVC yana da ƙarancin shan ruwa kuma yana tsayayya da fallasa danshi na yau da kullun, amma cikakken tsarin da aka shigar ya dogara da haɗin gwiwa, manne, gefuna da rufewa.

Shin takardar abu yana jure wa sinadarai?

PVC yana tsayayya da sinadarai da yawa, amma dole ne a duba daidaito don sanin ainihin sinadarai, yawansu, zafin jiki da lokacin da aka fallasa su.

Za a iya amfani da launukan PVC na yau da kullun don tankunan sinadarai?

Bai kamata a yi amfani da alamar gaba ɗaya ko matakin ado ta atomatik ga tankunan sinadarai ba. Ana buƙatar sake duba matakin masana'antu PVC -U da injiniyanci.

Shin launin PVC takardar abu yana hana wuta?

Bai kamata a bayyana shi a matsayin wanda ke da cikakken juriya ga wuta ba. Dole ne a sami goyon bayan rahoton gwaji don tabbatar da daidaiton inganci, launi da kauri.

Shin akwai maganin antistatic?

Ana iya kimanta tsarin antistatic bisa ga yanayin juriyar saman da ake buƙata, danshi, tsawon lokaci da aikace-aikacensa.

Shin PVC takardar abu ya dace da marufin abinci?

Bai kamata a yi amfani da UV mai launi na yau da kullun takardar abu ta atomatik don hulɗa da abinci ba. Ana buƙatar takamaiman tsari da takaddun kasuwa da za a yi amfani da su.

Za a iya amfani da PVC mai launi don kayayyakin likita?

Amfani da magani yana buƙatar ingantaccen matsayi da kuma tabbatar da ingancin kayan aiki, tsafta, bin diddiginsu da kuma buƙatun kayayyakin da aka gama.

Shin akwai fim ɗin kariya?

Za a iya tattauna fim ɗin kariya na gefe ɗaya ko na gefe biyu don takamaiman ƙayyadaddun bayanai masu sheƙi takardar abu .

Menene mafi ƙarancin adadin oda?

Launuka da ƙayyadaddun bayanai na yau da kullun galibi suna da MOQ na kimanin kilogiram 1000. Launuka na musamman ko samfuran UV na musamman na iya buƙatar kimanin kilogiram 3000.

Ana samun samfuran?

Ana iya samun samfuran A4 takardar abu da launuka masu kama da juna. Samfuran UV ko launuka na musamman na iya buƙatar tsarin gwaji.

Menene lokacin samar da jagora?

Tsarin samarwa na yau da kullun yana buƙatar kimanin kwanaki 7-15 bayan an tabbatar da launi, tsari, ƙayyadaddun bayanai, samfurin, marufi da ajiya.

Wane bayani ake buƙata don yin ƙiyasin farashi?

Bayar da kauri, girma, launi, saman, amfani a cikin gida ko waje, gwajin UV, hanyar sarrafawa, ƙa'idodi na musamman, adadi, shiryawa da inda za a je.

Sami Ƙimar da Aka Yi Launi da Ita ta Musamman PVC takardar

Game da Ƙungiyar Roba ta HSQY

HSQY Plastic Group tana samar da launuka masu tauri PVC takardar abu s, bayyanannu PVC takardar abu s, fina-finan PVC takardar abu , fina-finan { PVC PET takardar abu s, PP takardar abu s da kayan filastik na musamman ga abokan cinikin B2B na ƙasashen waje.

HSQY tana tallafawa masana'antun alamu, firintoci, kamfanonin nunin faifai, masu ƙera filastik, kamfanonin thermoforming, masu sarrafa masana'antu, masu shigo da kaya da masu rarrabawa tare da daidaita launi, gwajin samfura, samarwa na musamman, duba inganci da kuma shirya kayan fitarwa.

Nemi faɗar farashin da Samfura