Poker tulonkɛ kartiw PVC sɛbɛn ɲɛ jɛman fini jɛman 0,2mm ,0,26mm ,0,27mm ,0,28mm,0,3mm,0,35mm Janya

PVC tulonkɛ karti finman min bɛ kɛ ka Poker karti dilan

HSQY PVC finman tulonkɛ karti sɛbɛn ye plastiki gɛlɛn ye, min tɛ ye, min bɛ di tulonkɛ karti sɛbɛnnikɛlaw ma, karti caman tigɛlikɛlaw ani tulonkɛfɛnw dilannikɛlaw ma. O ye sɛbɛnfura raw ye sanni ka kɛ deki dafalen ye wa a dabɔra sɛbɛnni, dacogo, lamini, die-cutting, punching, corner rounding ani jiginni kama ka kɛ poker kartiw ye, kasino kartiw, board game kartiw, tarot kartiw, kalan kartiw ani promotion decks.

A janya bɛ se ka kɛ 0,20mm, 0,26mm, 0,27mm, 0,28mm, 0,30mm ani 0,35mm ye. Sɛbɛn hakɛ minnu bɛ sɔrɔ, olu ye 650 × 465mm, 670 × 470mm, 680 × 480mm ani 935 × 675mm ye, ni u bonya bɛ se ka kɛ ka kɛɲɛ ni sɛbɛnnikɛlan cogoya ye, imposiyɔn labɛncogo ani tigɛminɛnw.

O yɔrɔ finman min bɛ manamana, o bɛ kɔkanna saniyalen di karti ja dilancogo caman ma, k’a sɔrɔ opacity min bɛ kɔrɔsi, o bɛ dɛmɛ ka dɔ bɔ jirali la karti ɲɛda ni kɔ cɛ. Npogotiginin-minɛnw ni fɛn sugandilenw minnu bɛ kɛ ka segin u cogo kɔrɔ la, olu bɛ se ka baro kɛ ka kɛɲɛ ni nɛrɛmuguma wajibiyalen ye, yɔrɔ saniyacogo, sɛbɛnni kɛcogo ɲuman, karti dusukunnata ani sugu laban wajibiyalenw.

PVC finman tulonkɛ karti sɛbɛn ɲɛnamaw

PVC tulonkɛ karti sɛbɛn ye mun ye?

PVC tulonkɛ karti sɛbɛn ye plastiki sɛbɛn gɛlɛn ye min tɛ fomu ye, min dilannen don karti sɛbɛnni ni fɛn caman tigɛli kama. Karti dilannikɛlaw bɛ ɲɛda ni kɔfɛla ja bɔ, ka vernis walima finimugu wajibiyalen fɛn o fɛn kɛ, ka lamini layɛrɛw kɛ ni a mago bɛ a la, ka tila ka kartiw tigɛ ni die-cut ye ka u lamini fo ka se u hakɛ dafalenw ma.

Ni aw ye a suma ni papiye kariti ye, PVC tɛ ji minɛ nɔgɔya la, wa a bɛ se ka kɛ sababu ye ka a yɛrɛ tanga kosɛbɛ tigɛli ma, a dawolo sɔgɔli ani a tali segin-segin ma. Deki dafalen ka baara waati yɛrɛ fana bɛ bɔ tintin, finimugu, lamini, a sanfɛla sɔgɔli, tigɛcogo ɲuman, a maracogo ani a baarakɛlaw minɛcogo la.

Fɛn minnu ka kan ka kɛ ka ɲɛsin PVC sɛbɛn ma min bɛ wele ko Card-Grade

PVC sɛbɛnfura janya sugandicogo kartiw tulonkɛ kama

Janya man kan ka sugandi dɔrɔn ka bɔ karti dafalen jateminɛnan ɲininen na. Sannikɛla ka kan fana k’a jateminɛ ni karti ye fɛn kelen ye walima ni a lamininen don, tintin ni vernis girinya, finimugu janya, karti hakɛ, embossing depth, stiffness target, deck height ani desired shuffling feel.

PVC Tulonkɛ Karti sɛbɛn Jaw

PVC tulonkɛ karti misaliw dafalenw

Sɛbɛnni kɛcogo minnu bɛ kɛ ka PVC karti finmanw dilan

PVC gɛlɛn bɛ ni yɔrɔ ye min tɛ fɛn minɛ, o la sɛbɛnni kɛcogo bɛ bɔ sɛbɛn ɲɛ, enki chimie, yɔrɔ fanga, furakɛli fɛɛrɛ ani presse sigicogo la. Grade min bɛ baara kɛ ka ɲɛ ni UV offset ink ye, o man kan ka jate a yɛrɛma ko a bɛ baara kɛ ni inkjet, laser walima toner imprimante bɛɛ ye.

Surface Energy, Encre Adhesion ani Curing

Sɛbɛnni nɔrɔli ɲuman bɛ sanfɛla fanga bɛrɛ de wajibiya ani sɛbɛn sanuman min ma nɔgɔ. Sanniko ɲɛfɔli ka kan ka tintin kɛcogo jira, furakɛli wajibiyalen ani dina laɲini fɛn o fɛn. Surface furakɛli bɛ se ka Changé a maratuma na, o la sɛbɛnnikɛlan ka kan ka a ɲigincogo ni a nɔrɔli sɛgɛsɛgɛ sani a ka dilan.

UV lanpanw, fiɲɛ sumalenw jalenw ani laminatɛri sumalenw bɛ se ka sɛbɛnfura funteni kɔrɔta. Funteni kojugu bɛ se ka kɛ sababu ye ka kurukuru, ka dɔgɔya, ka a bali walima ka a tɔgɔ sɛbɛn. Enki ka kan ka kɛnɛya pewu sani sɛbɛnw ka kɛ ɲɔgɔn kan, ka u datugu, ka u lamini walima ka u pake.

• Aw bɛ yɔrɔ fanga lajɛ sani aw ka sɛbɛnni kɛ.

• Aw bɛ cross-hatch, tape walima ink-adhesion sɛgɛsɛgɛli wɛrɛw kɛ minnu bɛnna ɲɔgɔn kan.

• Aw bɛ kulɛri density, dot gain ani fine-line reproduction dafa.

• Aw bɛ UV kɛnɛyali dafalen sɛgɛsɛgɛ sani aw ka a dalajɛ.

• Aw bɛ sɛbɛnfura kurulen ni a hakɛ caman cili lajɛ furakɛli kɔfɛ.

• Karti sɛbɛnnenw kɔrɔbɔ u kɔrɔtalen kɔfɛ, u ɲagaminen kɔfɛ ani u sɔgɔlen kɔfɛ.

Tulonkɛ karti jɔcogo minnu bɛ kɛ ni fɛn kelen ye ani minnu bɛ kɛ ni lamini ye

Lamination, Varnish ani Surface Finish (Lamini, Varnish ani Surface Finish) ye

Lamini bɛ se ka dɔ fara karti girinya kan, ka layɛrɛ sɛbɛnnenw dogo ani ka u muɲuli ɲɛ, nka ni funteni tɛmɛna walima ni degun tɛ kelen ye, o bɛ se ka kɛ sababu ye ka kurukuru, ka dɔgɔya, ka fiɲɛ minɛ walima ka layini lamaga. Lamini finɛtiri ka kan ka sigi sen kan ni PVC hakɛ sugandilen ye ani sɛbɛnfura sɛbɛnnen lakikaw.

Vernis walima finimugu jɛlen bɛ se ka ja sɛbɛnnenw lakana ani ka karti sɔgɔli ladilan. Gloss, matte, linen-style, frosted walima tactile effects wɛrɛw bɛ se ka kɛ karti finidontuma na, nka a dacogo ka kan ka to ka wuli, wa a man kan ka kɛ sababu ye ka karti kɛrɛfɛtaw nɔrɔ ɲɔgɔn na.

Karti Friction, Shuffling ani Anti-Blocking baarakɛcogo

Tulonkɛ karti minnu banna, olu mago bɛ balansi kɔrɔsilen na slip ni grip cɛ. Karti minnu bɛ ɲɔgɔn sɔsɔ kojugu, o bɛ se ka gɛlɛya ka baara kɛ ni u ye ani ka u ɲagami ɲɔgɔn na, k’a sɔrɔ karti minnu bɛ sɛgɛn kojugu, olu kunbɛnni bɛ se ka gɛlɛya. Surface friction bɛ nɔ bila PVC fini, encre, vernis, embossing, additives, curing ani maracogo la.

Balili walima nɔrɔli bɛ se ka sɔrɔ enki kɛnɛyabaliya fɛ, vernis min tɛ bɛn ɲɔgɔn ma, finimugu girinya kojugu, slip farali minnu man ɲi, pake funteni caman walima kartiw dalajɛli sani a yɔrɔ ka sabati. Kɔrɔbɔli min bɛ kɛ ni deki dafalen ye, o ka kan ka don fɛn dilannenw ka sɔnni na.

Die-Cutting, Punching ani Nkɔni Lamini

PVC karti sɛbɛnw bɛ se ka tigɛ ni sa, ka punch, ka tigɛ ani ka kɛ nkɔni lamini na. Dawolo jogo bɛ bɔ nɛgɛdaga nɔgɔya la, die clearance, sheet thickness, stack height, temperature, cutting speed ani coating walima laminated material hakɛ.

• Aw bɛ karti hakɛw ni nkɔni janya sɛgɛsɛgɛ sani aw ka tigɛlan dilan.

• Aw bɛ sɛbɛnni joli ni sɛbɛnni taamasiɲɛw kɔlɔsi ka kɛɲɛ ni imposition layout ye.

• Aw bɛ baarakɛminɛn nɔgɔlenw kɛ walasa ka dɔ bɔ u finmanw na, u ka wuluwuluw ni u dawolo gɛlɛnw na.

• Aw bɛ karti kɛrɛnkɛrɛnnenw lajɛ, a hakɛ muɲuni ani a nkɔni ɲɔgɔndan.

• Aw bɛ karti lamininenw sɛgɛsɛgɛ walasa u dakunw tɛ fara ɲɔgɔn kan u tigɛlen kɔfɛ.

• Aw bɛ deki minɛcogo kɔrɔbɔ a tilacogo, a pake ani a marali kɔfɛ.

PVC tulonkɛ karti sɛbɛnw kɛcogo

PVC tulonkɛ kartiw vs Paper tulonkɛ kartiw

Npogotiginin ni Recycled-Content PVC sugandiliw

A ka c’a la, Virgin PVC bɛ se ka fanga di a ma ka ɲɛsin fini jɛman ma, a tɛ ye, a ɲɛda saniya, a kasa, a kulɛri cogoya ani a sɛbɛnni cogoya. A ka c’a la, a ka fisa yɔrɔ minnu na ɲɛnayeli ɲuman ni baarakɛcogo sabatili de ye fɔlɔfɔlɔko kunbabaw ye.

Furakɛcogo minnu bɛ kɛ ni fɛn wɛrɛw ye, olu bɛ se ka bɛn poroze sugandilenw ma, nka u bɔyɔrɔ ni u kɛmɛsarada la, u bɛ se ka nɔ bila biɲɛ, nɔgɔ hakɛ, kasa, masinw cogoya ani batɛmu ɲɔgɔndan na. Laɲini min bɛ kɛ ka fɛnw labɛn kokura, o ka kan ka bɛn ni yecogo ni baarakɛcogo misali ye min dagalen don sani a ka dilan.

Quality-Control Tests ka ɲɛsin tulonkɛ karti PVC sɛbɛn ma

• Sɛgɛsɛgɛli min bɛ kɛ ni a bonya ni a bonya muɲuni ye.

• Sɛbɛn hakɛ, a kɛnɛ ani a dakun-jogo sɛgɛsɛgɛli.

• Fɛnɲɛnɛma, opacity ani show-through jateminɛ.

• Surface saniya ani ɲɛnayeli-dɛsɛw sɛgɛsɛgɛli.

• Sheet flatness, curl ani shrinkage sɛgɛsɛgɛli.

• Surface-energie ani ink-adhesion sɛgɛsɛgɛli.

• Sɛbɛnni, furakɛli ani lamini sɛgɛsɛgɛliw.

• Die-cutting, corner-rounding ani dakun sɛgɛsɛgɛli.

• Flexing, shuffling, abrasion ani blocking sɛgɛsɛgɛliw.

• Finished-deck thickness, girinya ani a minɛcogo jateminɛ.

Kunnafoni minnu ka kan ka kɛ walasa ka Quotation sɔrɔ

Seereyaw ni Kɔrɔbɔli sɛbɛnw

Seereyaw ni rapɔɔri minnu bɛ sɔrɔ, olu ka kan ka bɛn PVC dilanni tigitigi ma, a kɔnɔfɛnw hakɛ, a kulɛri, a bonya ani a dilanni kulu. Sannikɛlaw ka kan ka RoHS, REACH, nɛgɛ gɛlɛn, phthalate, tulonkɛfɛnw lakanani walima taayɔrɔ-sɔgɔli wajibiyalen fɛn o fɛn dɔn sani u ka dilan.

Duniya bɛɛ ka ɲɛjiraliw

Sɛnɛfɛnw dilanni ni u forokoni

PVC karti sɛbɛnw bɛ se ka lakana ni PE filimu ye, ni kraft papier ye, ni kartɔnw ye, ni nkɔni pankurunw ye, ni sirilanw ye ani ni palɛtiw ye minnu bɛ taa ni u ye jamana wɛrɛw la. Pakew kɔnɔfɛnw ka kan ka buguri, sanfɛla sɔgɔsɔgɔli, ji bɔli, dakun tiɲɛni ani sɛbɛnw lamaga kojugu bali u cituma na.

Ɲininkali minnu bɛ kɛ tuma caman na PVC tulonkɛ karti sɛbɛnw kan

HSQY Plastic Group ko la